Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250615009

‘GM50xx’ range of stainless steel (SS304 or SS316L) press-fit fittings incorporating EPDM ‘O’-rings for use with *- STPT304 and *- STPT316 stainless steel pipes. The GM5004 prefix models also incorporates an EPDM gasket on the union nut. Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250615009
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15 - 108mm. ½” - 3” BSP (M). ½” - 2” BSP (F).
Marking:: Kasinpress (brand of WENZHOU KASIN VALVE PIPE FITTING CO., LTD), size, WRAS and material grade on fitting body. WRAS, Kasinpress (brand of WENZHOU KASIN VALVE PIPE FITTING CO., LTD), size, material grade, EN10312 and date of manufacture (YYYY/MM) on pipe.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Adapter 90 with female thread: GM5016-1505: 15×Rp½. GM5016-1805: 18×Rp½. GM5016-22075: 22×Rp¾. Adapter with female thread: GM5002-1505: 15×Rp½. GM5002-1805: 18×Rp½. GM5002-22075: 22×Rp¾. GM5002-281: 28×Rp1. GM5002-351025: 35×Rp1¼. GM5002-42105: 42×Rp1½. GM5002-542: 54×Rp2. Bridge with plain ending: GM5035-18: 18. GM5035-22: 22. GM5035-28: 28. Cap: GM5024-15: 15. GM5024-18: 18. GM5024-22: 22. GM5024-28: 28. GM5024-35: 35. GM5024-42: 42. GM5024-54: 54. GM5024-76: 76.1. GM5024-89: 88.9. GM5024-108: 108. Elbow 45 with press ending: GM5008-15: 15. GM5008-18: 18. GM5008-22: 22. GM5008-28: 28. GM5008-35: 35. GM5008-42: 42. GM5008-54: 54. GM5008-76: 76.1. GM5008-89: 88.9. GM5008-108: 108. Elbow 45 with plain ending: GM5009-15: 15. GM5009-18: 18. GM5009-22: 22. GM5009-28: 28. GM5009-35: 35. GM5009-42: 42. GM5009-54: 54. GM5009-76: 76.1. GM5009-89: 88.9. GM5009-108: 108. Elbow 90 with press ending: GM5006-15: 15. GM5006-18: 18. GM5006-22: 22. GM5006-28: 28. GM5006-35: 35. GM5006-42: 42. GM5006-54: 54. GM5006-67: 66.7. GM5006-76: 76.1. GM5006-89: 88.9. GM5006-108 -108. Elbow 90 with female thread: GM5021-1505: 15×Rp½. GM5021-1805: 18×Rp½. GM5021-22075: 22×Rp¾. GM5021-281: 28×Rp1. GM5021-351024: 35×Rp1¼. GM5021-42105: 42×Rp1½. GM5021-542: 54×Rp2. Elbow: 90 with: male thread: GM5010-1505: 15×R½. GM5010-1805: 18×R½. GM5010-22075: 22×R¾ Elbow 90 with plain ending: GM5007-15: 15. GM5007-18: 18. GM5007-22: 22. GM5007-28: 28. GM5007-35: 35. GM5007-42: 42. GM5007-54: 54. GM5007-76: 76.1. GM5007-89: 88.9. GM5007-108: 108. Reducer coupling with plain ending: GM5005-1815: 18×15. GM5005-2218: 22×18. GM5005-2818: 28×18. GM5005-3522: 35×22. GM5005-3528: 35×28. GM5005-4222: 42×22. GM5005-4228: 42×28. GM5005-4235: 42×35. GM5005-5428: 54×28. GM5005-5435: 54×35. GM5005-5442: 54×42. Reducer coupling with press ending: GM5011-1815: 18×15. GM5011-2215: 22×15. GM5011-2218: 22×18. GM5011-2815: 28×15. GM5011-2818: 28×18. GM5011-2822: 28×22. GM5011-3515: 35×15. GM5011-3518: 35×18. GM5011-3522: 35×22. GM5011-3528: 35×28. GM5011-4215: 42×15. GM5011-4218: 42×18. GM5011-4222: 42×22. GM5011-4228: 42×28. GM5011-4235: 42×35. GM5011-5415: 54×15. GM5011-5418: 54×18. GM5011-5422: 54×22. GM5011-5428: 54×28. GM5011-5435: 54×35. GM5011-5442: 54×42. GM5011-6735: 66.7×35. GM5011-6754: 66.7×54. GM5011-7654: 76.1×54. GM5011-8954: 88.9×54. GM5011-8976: 88.9×76.1. GM5011-10854: 108×54. GM5011-10876: 108×76.1. GM5011-10889: 108×88.9. Reducer Tee with press ending: GM5015-1815: 18×15×18. GM5015-2215: 22×15×22. GM5015-2218: 22×18×22. GM5015-2815: 28×15×28. GM5015-2818: 28×18×28. GM5015-2822: 28×22×28. GM5015-3522: 35×22×35. GM5015-3528: 35×28×35. GM5015-4222: 42×22×42. GM5015-4228: 42×28×42. GM5015-4235: 42×35×42. GM5015-5422: 54×22×54. GM5015-5428: 54×28×54. GM5015-5435: 54×35×54. GM5015-5442: 54×42×54. GM5015-7642: 76.1×42×76.1. GM5015-7654: 76.1×54×76.1. GM5015-8954: 88.9×54×88.9 GM5015-10854: 108×54×108. GM5015-10876: 108×76.1×108. GM5015-10889: 108×88.9×108 Equal coupling with press ending: GM5001-15: 15. GM5001-18: 18. GM5001-22: 22 GM5001-28: 28. GM5001-35: 35. GM5001-42: 42. GM5001-54: 54. GM5001-67: 66.7. GM5001-76: 76.1. GM5001-89: 88.9. GM5001-108: 108 Adapter with male thread: GM5003-1505: 15×R½. GM5003-1805: 18×R½. GM5003-18075: 18×R¾. GM5003-2205: 22×R½. GM5003-22075: 22×R¾. GM5003-281: 28×R1. GM5003-351025: 35×R1¼. GM5003-42105: 42×R1½. GM5003-542: 54×R2. GM5003-76205: 76.1×R2½. GM5003-893: 88.9×R3. Slip coupling with press ending: GM5019-15: 15. GM5019-18: 18. GM5019-22: 22. GM5019-28: 28. GM5019-35: 35. GM5019-42: 42 GM5019-54: 54. Tee with press ending: GM5012-15: 15. GM5012-18: 18. GM5012-22: 22. GM5012-28: 28. GM5012-35: 35. GM5012-42: 42. GM5012-54: 54. GM5012-76: 76.1. GM5012-89: 88.9. GM5012-108: 108. Tee with male thread: GM5013-1505: 15×R½. GM5013-1805: 18×R½. GM5013-2205: 22×R½. GM5013-22075: 22×R¾. GM5013-2805: 28×R½. GM5013-28075: 28×R¾. GM5013-281: 28×R1. GM5013-3505: 35×R½. GM5013-351025: 35×R1¼. GM5013-421025: 42×R1¼. GM5013-54105: 54×R1½. GM5013-542: 54×R2. Tee with female thread:: GM5014-1505: 15×Rp½. GM5014-1805: 18×Rp½. GM5014-2205: 22×Rp½. GM5014-22075: 22×Rp¾. GM5014-2805: 28×R½. GM5014-28075: 28×Rp¾. GM5014-281: 28×Rp1. GM5014-3505: 35×Rp½. GM5014-351025: 35×Rp1¼. GM5014-421025: 42×Rp1¼. GM5014-54105: 54×1½. GM5014-542: 54×Rp2. Adaptor with union nut: GM5004-1505: 15×G½. GM5004-1805: 18×G½. GM5004-18075: 18×G¾. GM5004-2205: 22×G½. GM5004-22075: 22×G¾. GM5004-221: 22×G1. GM5004-281: 28×G1. GM5004-351025: 35×G1¼. GM5004-421075: 42×G1¾. GM5004-542: 54×G2. Stainless steel pipe (SS304 or SS316L): *- STPT304 (SS304). *- STPT316L (SS316L). Where * = size in mm between 15 and 108 (in whole numbers: 15, 18, 22, 28, 35, 42, 54, 66.7, 76.1, 88.9, 108).

Product Images

Approval Holder:: WENZHOU KASIN VALVE PIPE FITTING CO., LTD

Company Name
WENZHOU KASIN VALVE PIPE FITTING CO., LTD
Address
NO.2‐1802 Caizhi Building, No. 88, Binhang Road, Yongzhong Sub‐District, Longwan District, Wenzhou, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #250604019

Range of stainless-steel press fittings with EPDM ‘O’-rings for use with stainless-steel pipe to EN10312. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250604019
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: GD Press, size, 304L, model number on body.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Coupling GDC5001 OD15 GDC5002 OD18 GDC5003 OD22 GDC5004 OD28 GDC5005 OD35 GDC5006 OD42 GDC5007 OD54 GDC6501 OD66.7 GDC5008 OD76.1 GDC5009 OD88.9 GDC5010 OD108 Long Coupling GDC5011 OD15 GDC5012 OD18 GDC5013 OD22 GDC5014 OD28 GDC5015 OD35 GDC5016 OD42 GDC5017 OD54 GDC6502 OD66.7 GDC5018 OD76.1 GDC5019 OD88.9 GDC5020 OD108 Reducer with Plain End GDC5021 OD18×OD15 GDC5022 OD22×OD15 GDC5023 OD22×OD18 GDC5024 OD28×OD15 GDC5025 OD28×OD18 GDC5026 OD28×OD22 GDC5048 OD35×OD15 GDC5027 OD35×OD18 GDC5029 OD35×OD22 GDC5030 OD35×OD28 GDC5031 OD42×OD15 GDC5032 OD42×OD18 GDC5033 OD42×OD22 GDC5034 OD42×OD28 GDC5035 OD42×OD35 GDC5036 OD54×OD15 GDC5037 OD54×OD18 GDC5038 OD54×OD22 GDC5039 OD54×OD28 GDC5040 OD54×OD35 GDC5041 OD54×OD42 GDC6503 OD66.7×OD42 GDC6504 OD66.7×OD54 GDC5028 OD76.1×OD42 GDC5042 OD76.1×OD54 GDC6505 OD76.1×OD66.7 GDC5049 OD88.9×OD42 GDC5043 OD88.9×OD54 GDC6506 OD88.9×OD66.7 GDC5044 OD88.9×OD76.1 GDC5045 OD108×OD54 GDC6507 OD108×OD66.7 GDC5046 OD108×OD76.1 GDC5047 OD108×OD88.9 90° Elbow GDC6051 OD15 GDC6052 OD18 GDC6053 OD22 GDC6054 OD28 GDC6055 OD35 GDC6056 OD42 GDC6057 OD54 GDC6511 OD66.7 GDC6058 OD76.1 GDC6059 OD88.9 GDC6060 OD108 90° Elbow with Plain End GDC6071 OD15 GDC6072 OD18 GDC6073 OD22 GDC6074 OD28 GDC6075 OD35 GDC6076 OD42 GDC6077 OD54 GDC6512 OD66.7 GDC6078 OD76.1 GDC6079 OD88.9 GDC6080 OD108 45° Elbow GDC6101 OD15 GDC6102 OD18 GDC6103 OD22 GDC6104 OD28 GDC6105 OD35 GDC6106 OD42 GDC6107 OD54 GDC6513 OD66.7 GDC6108 OD76.1 GDC6109 OD88.9 GDC6110 OD108 45° Elbow with Plain End GDC6121 OD15 GDC6122 OD18 GDC6123 OD22 GDC6124 OD28 GDC6125 OD35 GDC6126 OD42 GDC6127 OD54 GDC6514 OD66.7 GDC6128 OD76.1 GDC6129 OD88.9 GDC6130 OD108 Tee GDC5181 OD15 GDC5182 OD18 GDC5183 OD22 GDC5184 OD28 GDC5185 OD35 GDC5186 OD42 GDC5187 OD54 GDC6515 OD66.7 GDC5188 OD76.1 GDC5189 OD88.9 GDC5190 OD108 Reducing Tee GDC5191 OD18×OD15 GDC5192 OD22×OD15 GDC5193 OD22×OD18 GDC5194 OD28×OD15 GDC5195 OD28×OD18 GDC5196 OD28×OD22 GDC5197 OD35×OD15 GDC5198 OD35×OD18 GDC5199 OD35×OD22 GDC5200 OD35×OD28 GDC5201 OD42×OD15 GDC5202 OD42×OD18 GDC5203 OD42×OD22 GDC5204 OD42×OD28 GDC5205 OD42×OD35 GDC5206 OD54×OD15 GDC5207 OD54×OD18 GDC5208 OD54×OD22 GDC5209 OD54×OD28 GDC5210 OD54×OD35 GDC5211 OD54×OD42 GDC6517 OD66.7×OD22 GDC6518 OD66.7×OD28 GDC6519 OD66.7×OD35 GDC6520 OD66.7×OD42 GDC6521 OD66.7×OD54 GDC5212 OD76.1×OD22 GDC5213 OD76.1×OD28 GDC5214 OD76.1×OD35 GDC5215 OD76.1×OD42 GDC5216 OD76.1×OD54 GDC6522 OD76.1×OD66.7 GDC5217 OD88.9×OD22 GDC5218 OD88.9×OD28 GDC5219 OD88.9×OD35 GDC5220 OD88.9×OD42 GDC5221 OD88.9×OD54 GDC6523 OD88.9×OD66.7 GDC5222 OD88.9×OD76.1 GDC5223 OD108×OD22 GDC5224 OD108×OD28 GDC5225 OD108×OD35 GDC5226 OD108×OD42 GDC5227 OD108×OD54 GDC6524 OD108×OD66.7 GDC5228 OD108×OD76.1 GDC5229 OD108×OD88.9 Tee with Male Thread End GDC5231 OD15×R1/2 GDC5232 OD18×R1/2 GDC5239 OD22×R1/2 GDC5233 OD22×R3/4 GDC5234 OD22×R1 GDC5240 OD28×R1/2 GDC5283 OD28×R3/4 GDC5235 OD28×R1 GDC5281 OD35×Rp3/4 GDC5236 OD35×Rp1 1/4 GDC5237 OD42×Rp1 1/2 GDC5282 OD54×Rp1/2 GDC5238 OD54×Rp2 Tee with Female Thread End GDC5241 OD15×Rp1/2 GDC5242 OD18×Rp1/2 GDC5243 OD18×Rp3/4 GDC5244 OD22×Rp1/2 GDC5245 OD22×Rp3/4 GDC5246 OD28×Rp1/2 GDC5247 OD28×Rp3/4 GDC5248 OD28×Rp1 GDC5249 OD35×Rp1/2 GDC5250 OD35×Rp3/4 GDC5262 OD35×Rp1 GDC5263 OD35×Rp1 1/4 GDC5251 OD42×Rp1/2 GDC5252 OD42×Rp3/4 GDC5264 OD42×Rp1 GDC5265 OD42×Rp1 1/2 GDC5253 OD54×Rp1/2 GDC5254 OD54×Rp3/4 GDC5266 OD54×Rp1 GDC5255 OD54×Rp2 GDC6531 OD66.7×Rp1/2 GDC6532 OD66.7×Rp3/4 GDC6533 OD66.7×Rp1 1/2 GDC5256 OD76.1×Rp3/4 GDC5257 OD76.1×Rp2 GDC5258 OD88.9×Rp3/4 GDC5259 OD88.9×Rp2 GDC5260 OD108×Rp3/4 GDC5261 OD108×Rp2 Adaptor with Male Thread End GDC5360 OD15×R3/8 GDC5361 OD15×R1/2 GDC5362 OD15×R3/4 GDC5363 OD18×R1/2 GDC5364 OD18×R3/4 GDC5365 OD22×R1/2 GDC5366 OD22×R3/4 GDC5367 OD22×R1 GDC5368 OD28×R3/4 GDC5369 OD28×R1 GDC5370 OD28×R1 1/4 GDC5371 OD35×R1 GDC5372 OD35×R1 1/4 GDC5373 OD35×R1 1/2 GDC5374 OD42×R1 1/4 GDC5375 OD42×R1 1/2 GDC5376 OD54×R1 1/2 GDC5377 OD54×R2 GDC6541 OD66.7×R2 1/2 GDC5378 OD76.1×R2 1/2 GDC5379 OD88.9×R3 GDC5380 OD108×R4 Adaptor with Female Thread End GDC5381 OD15×Rp1/2 GDC5382 OD15×Rp3/4 GDC5383 OD18×Rp1/2 GDC5384 OD18×Rp3/4 GDC5385 OD22×Rp1/2 GDC5386 OD22×Rp3/4 GDC5387 OD22×Rp1 GDC5388 OD28×Rp3/4 GDC5389 OD28×Rp1 GDC5390 OD28×Rp1 1/4 GDC5391 OD35×Rp1 GDC5392 OD35×Rp1 1/4 GDC5393 OD35×Rp1 1/2 GDC5394 OD42×Rp1 1/4 GDC5395 OD42×Rp1 1/2 GDC5396 OD54×Rp1 1/2 GDC5397 OD54×Rp2 GDC6542 OD66.7×Rp2 1/2 GDC5398 OD76.1×Rp2 1/2 GDC5399 OD88.9×Rp3 GDC5400 OD108×Rp4 Cap GDC5421 OD15 GDC5422 OD18 GDC5423 OD22 GDC5424 OD28 GDC5425 OD35 GDC5426 OD42 GDC5427 OD54 GDC6542 OD66.7 GDC5428 OD76.1 GDC5429 OD88.9 GDC5430 OD108 Adaptor with Union Nut GDC5341 OD15×G1/2 GDC5353 OD15×G3/4 GDC5342 OD18×G1/2 GDC5343 OD18×G3/4 GDC5345 OD22×G1 GDC5347 OD28×G1 GDC5348 OD28×G1 1/4 GDC5359 OD35×G1 1/4 GDC5350 OD35×G1 1/2 GDC5351 OD42×G1 3/4 GDC5346 OD42×G1 1/2 GDC5356 OD54×G2 GDC5352 OD54×G2 3/8 Adaptor with Union with Female thread GDC5451 OD15×Rp1/2 GDC5452 OD15×Rp3/4 GDC5453 OD18×Rp1/2 GDC5454 OD18×Rp3/4 GDC5455 OD22×Rp3/4 GDC5456 OD22×Rp1 GDC5457 OD28×Rp1 GDC5458 OD35×Rp1 1/4 GDC5459 OD42×Rp1 1/2 GDC5460 OD54×Rp2 Adaptor Union with Male Thread GDC5431 OD15×R1/2 GDC5432 OD15×R3/4 GDC5433 OD18×R1/2 GDC5434 OD18×R3/4 GDC5435 OD22×R1/2 GDC5436 OD22×R3/4 GDC5437 OD22×R1 GDC5438 OD28×R1 GDC5439 OD35×R1 1/4 GDC5440 OD42×R1 1/2 GDC5441 OD54×R2 Adaptor Union GDC5471 OD15 GDC5472 OD18 GDC5473 OD22 GDC5474 OD28 GDC5475 OD35 GDC5476 OD42 GDC5477 OD54 Flange with Pressing Socket GDC5301 OD15 GDC5302 OD18 GDC5303 OD22 GDC5304 OD28 GDC5305 OD35 GDC5306 OD42 GDC5307 OD54 GDC6536 OD66.7 GDC5308 OD76.1 GDC5309 OD88.9 GDC5310 OD108

Approval Holder:: Grande-tek Flow Control Co., Ltd

Company Name
Grande-tek Flow Control Co., Ltd
Address
Industrial Zone of Yunhe District, Fuyang Road, Cangzhou, Hebei
Postcode
061000
Country
China

View All Listings by this Company

WRAS Approval Number: #250604025

‘Uponor Q&E’ range of brass press-fit fittings for use with PE-Xa-PE-PE ‘Uponor Aqua Pipe AU’ multi-layered pipes. Maximum operating pressure 10 bar. Maximum operating temperature 70°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250604025
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 16mm – 25mm, ½” – 1”.
Marking:: Pipe - Uponor, size, PN, temperature, SDR & PE-Xa. Fittings - Uponor logo, size and other technical information.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Uponor Aqua Pipe AU 3-layer pipes: 1126786 - Uponor Aqua Pipe AU 16x2,2 100 mt, 1126787 - Uponor Aqua Pipe AU 20x2,8 100 mt, 1126788 - Uponor Aqua Pipe AU 25x3,5 50mt. Brass fittings: Uponor Q&E Coupling LL: 1126789 - 16x16, 1126790 - 20x20, 1126791 - 25x25. Uponor Q&E Reducer LL: 1126792 - 20x16, 1126793 - 25x16, 1126794 - 25x20. Uponor Q&E Elbow LL: 1126795 - 16x16, 1126796 - 20x20, 1126797 - 25x25. Uponor Q&E Tee LL: 1126798 - 16x16x16, 1126799 - 20x20x20, 1126800 - 25x25x25. Uponor Q&E Tee Reducer LL: 1126801 - 16x20x16, 1126802 - 20x16x16, 1126803 - 20x16x20, 1126804 - 20x20x16, 1126805 - 25x16x25, 1126806 - 25x20x25. Uponor Q&E Plug LL: 1126807 - 16, 1126808 - 20. Uponor Q&E Adapter Female LL: 1126809 - 16-Rp1/2", 1126810 - 20-Rp1/2", 1126811 - 20-Rp3/4", 1126812 - 20-Rp1", 1126813 - 25-Rp1". Uponor Q&E Adapter Male LL: 1126814 - 16-R1/2", 1126815 - 16-R3/4", 1126816 - 20-R1/2", 1126817 - 20-R3/4", 1126818 - 20-R1", 1126819 - 25-R3/4", 1126820 - 25-R1". Uponor Q&E Adapter Swivel Nut: 1126821 - 16-1/2", 1126822 - 20-1/2", 1126823 - 20-3/4", 1126824 - 25-3/4", 1126825 - 25-1". Uponor Q&E Elbow Swivel Nut: 1126826 - 16-1/2", 1126827 - 20-1/2". Uponor Q&E Tap Elbow LL: 1126828 - 16-1/2", 1126829 - 20-1/2", 1126830 - 20-3/4". Uponor Q&E Elbow Adapter Male LL: 1126831 - 16-G1/2", 1126832 - 20-G1/2", 1126833 - 20-R1/2", 1126834 - 20-G3/4", 1126871 - 25-G3/4". Uponor Q&E Elbow Adapter Female LL: 1126835 - 16-1/2", 1126836 - 20-3/4", 1126837 - 25-3/4". Uponor Q&E Tee female LL: 1126838 - 25-1/2"-25, 1126839 - 25-3/4"-25. Uponor Q&E BP-Elbow LL: 1126841 - 16-1/2" MT L = 65 MM, 1126842 - 16-1/2" MT L = 90 MM, 1126843 - 16-1/2" MT L = 175 MM, 1126844 - 16-1/2" MT L = 200 MM, 1126845 - 20-1/2"MT L = 95 MM, 1126846 - 20-1/2"MT L = 200 MM, 1126847 - 20-3/4" MT L = 100 MM. Uponor Q&E Brass Adapter LL: 1126848 - 16-15 CU, 1126849 - 20-15 CU, 1126850 - 20-3/4" CU, 1126851 - 25-1" CU. Uponor Q&E Brass Adapter LL PRESS: 1126852 - 16-1/2" CU, 1126853 - 20-3/4" CU, 1126854 - 25-1" CU. Uponor Q&E adapter male thread PL: 1023003 - 16-R1/2"MT, 1023005 - 20-R1/2"MT, 1023007 - 25-R3/4"MT. Uponor Smart Aqua tap elbow term. box Q&E UP PL: 1047935 - 16-Rp1/2"FT. Uponor Smart Aqua tap elbow term. box Q&E SP PL: 1047932 - 20-Rp1/2"FT, 1047933 - 25-Rp3/4"FT.

Approval Holder:: Uponor GmbH

Company Name
Uponor GmbH
Address
Industriestrasse 56, Hassfurt
Postcode
97437,
Country
Germany
Phone
0034916853600
General Email
mariaisabel.fernandez@uponor.com

View All Listings by this Company

WRAS Approval Number: #2303405

Range of stainless steel (SUS304/316L) crimp fittings incorporating EPDM ‘O’-rings. For use with Mingshi stainless steel pipes (SUS304/316L). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2303405
Size:: see model
Marking:: BECLI Logo, size & material on pipe and fitting body.
Installation Requirements:: R001
Expiry date:: 31/03/2028
Model:: Male threaded coupler: S15х1/2"W: 15 x ½” BSP (M), S15х3/4"W: 15 x ¾” BSP (M), S18х1/2"W: 18 x ½” BSP (M), S18х3/4"W: 18 x ¾” BSP (M), S22х1/2"W: 22 x ½” BSP (M), S22х3/4"W: 22 x ¾” BSP (M), S22х1"W: 22 x 1” BSP (M), S28х3/4"W: 28 x ¾” BSP (M), S28x1"W: 28 x 1” BSP (M), S35x1"W: 35 x 1” BSP (M), S35x1 1/4"W: 35 x 1¼” BSP (M), S42х1 1/2"W: 42 x 1½” BSP (M), S54х2"W: 54 x 2” BSP (M). Male threaded coupler with straight pipe: 15х1/2"W: 15 x ½” BSP (M), 15x3/4"W: 15 x ¾” BSP (M), 18х1/2"W: 18 x ½” BSP (M), 18х3/4"W: 18 x ¾” BSP (M), 18x1"W: 18 x 1” BSP (M), 22х1/2"W: 22 x ½” BSP (M), 22х3/4"W: 22 x ¾” BSP (M), 22x1"W: 22 x 1” BSP (M), 28х3/4"W: 28 x ¾” BSP (M), 28х1"W: 28 x 1” BSP (M), 35х1 1/4"W: 35 x 1¼” BSP (M), 42х1 1/2"W: 42 x 1½” BSP (M), 54х2"W: 54 x 2” BSP (M). Female threaded coupler: S15х1/2"N: 15 x ½” BSP (F), S18х1/2"N: 18 x ½” BSP (F), S18х3/4"N: 18 x ¾” BSP (F), S22х1/2"N: 22 x ½” BSP (F), S22х3/4"N: 22 x ¾” BSP (F), S28х3/4"N: 28 x ¾” BSP (F), S28х1"N: 28 x 1” BSP (F), S35x1"N: 35 x 1” BSP (F), S35x1 1/4"N: 35 x 1¼” BSP (F), S42х1 1/2"N: 42 x 1½” BSP (F), S54х2"N: 54 x 2” BSP (F). Female threaded coupler with straight pipe: 15х1/2"N: 15 x ½” BSP (F), 15x3/4"N: 15 x ¾” BSP (F), 18х1/2"N: 18 x ½” BSP (F), 18х3/4"N: 18 x ¾” BSP (F), 18x1"N: 18 x 1” BSP (F), 22х1/2"N: 22 x ½” BSP (F), 22х3/4"N: 22 x ¾” BSP (F), 22x1"N: 22 x 1” BSP (F), 28х3/4"N: 28 x ¾” BSP (F), 28х1"N: 28 x 1” BSP (F), 35х1 1/4"N: 35 x 1¼” BSP (F), 42х1 1/2"N: 42 x 1½” BSP (F), 54х2"N: 54 x 2” BSP (F). Coupler: S15: 15 x 15mm, S18х15: 18 x 15mm, S18: 18 x 18mm, S22х18: 22 x 18mm, S22х15: 22 x 15mm, S22: 22 x 22mm, S28х15: 28 x 15mm, S28х22: 28 x 22mm, S28: 28 x 28mm, S35х28: 35 x 28mm, S35: 35 x 35mm, S42х35: 42 x 35mm, S42: 42 x 42mm, S54х42: 54 x 42mm, S54: 54 x 54mm. Coupler with straight pipe: S18х15Ⅱ: 18 x 15mm, S22х15Ⅱ: 22 x 15mm, S22х18Ⅱ: 22 x 18mm, S28х15Ⅱ: 28 x 15mm, S28х18Ⅱ: 28 x 18mm, S28х22Ⅱ: 28 x 22mm, S35х15Ⅱ: 35 x 15mm, S35х18Ⅱ: 35 x 18mm, S35х22Ⅱ: 35 x 22mm, S35х28Ⅱ: 35 x 28mm, S42х22Ⅱ: 42 x 22mm, S42х28Ⅱ: 42 x 28mm, S42х35Ⅱ: 42 x 35mm, S54х28Ⅱ: 54 x 28mm, S54х35Ⅱ: 54 x 35mm, S54х42Ⅱ: 54 x 42mm. Adjustable connector: S15Ⅱ: 15 x 15mm, S18Ⅱ: 18 x 18mm, S22Ⅱ: 22 x 22mm, S28Ⅱ: 28 x 28mm, S35Ⅱ: 35 x 35mm, S42Ⅱ: 42 x 42mm, S54Ⅱ: 54 x 54mm. Union: H15х1/2": 15 x ½” captive nut, H15х3/4": 15 x ¾” captive nut, H18х1/2": 18 x ½” captive nut, H18х3/4": 18 x ¾” captive nut, H22х1/2": 22 x ½” captive nut, H22х3/4": 22 x ¾” captive nut, H28х3/4": 28 x ¾” captive nut, H28х1": 28 x 1” captive nut, H35x1": 35 x 1” captive nut, H35x1 1/4": 35 x 1¼” captive nut, H42х1 1/2": 42 x 1½” captive nut, H54х2": 54 x 2” captive nut. Tee: T15: 15 x 15 x 15mm, T18х15х18: 18 x 15 x 18mm, T18: 18 x 18 x 18mm, T22х18х22: 22 x 18 x 22mm, T22х15х22: 22 x 15 x 22mm, T22: 22 x 22 x 22mm, T28x15x28: 28 x 15 x 28mm, T28х22х22: 28 x 22 x 22mm, T28x22x28: 28 x 22 x 28mm, T28: 28 x 28 x 28mm, T35x15x35: 35 x 15 x 35mm, T35x22x35: 35 x 22 x 35mm, T35x28x35: 35 x 28 x 35mm, T35: 35 x 35 x 35mm, T42х35х42: 42 x 35 x 42mm, T42: 42 x 42 x 42mm, T54х42х54: 54 x 42 x 54mm, T54: 54 x 54 x 54mm. Female threaded Tee: T15х1/2"Nx15: 15 x ½” BSP (F) x 15mm, T18х1/2"Nx18: 18 x ½” BSP (F) x 18mm, T18х3/4"Nx18: 18 x ¾” BSP (F) x 18mm, T22х1/2"Nx22: 22 x ½” BSP (F) x 22mm, T22х3/4"Nx22: 22 x ¾” BSP (F) x 22mm, T28х1/2"Nx28: 28 x ½” BSP (F) x 28mm, T28х3/4"Nx28: 28 x ¾” BSP (F) x 28mm, T28х1"Nx28: 28 x 1” BSP (F) x 28mm, T35х1"Nx35: 35 x 1” BSP (F) x 35mm, T35х1 1/4"Nx35: 35 x 1¼” BSP (F) x 35mm, T42х1 1/2"Nх42: 42 x 1½” BSP (F) x 42mm, T54х2"Nх54: 54 x 2” BSP (F) x 54mm. Male threaded Tee: T15х1/2"Wx15: 15 x ½” BSP (M) x 15mm, T18х1/2"Wx18: 18 x ½” BSP (M) x 18mm, T18х3/4"Wx18: 18 x ¾” BSP (M) x 18mm, T22х1/2"Wx22: 22 x ½” BSP (M) x 22mm, T22х3/4"Wx22: 22 x ¾” BSP (M) x 22mm, T28х1/2"Wx28: 28 x ½” BSP (M) x 28mm, T28х3/4"Wx28: 28 x ¾” BSP (M) x 28mm, T28х1"Wx28: 28 x 1” BSP (M) x 28mm, T35х1"Wx35: 35 x 1” BSP (M) x 35mm, T35х1 1/4"Wx35: 35 x 1¼” BSP (M) x 35mm, T42х1 1/2"Wх42: 35 x 1½” BSP (M) x 35mm, T54х2"Wх54: 54 x 2” BSP (M) x 54mm. 90°B Elbow: L15a: 15 x 15mm, L18а: 18 x 18mm, L22a: 22 x 22mm, L28a: 28 x 28mm, L35a: 35 x 35mm, L42а: 42 x 42mm, L54а: 54 x 54mm. 90°A Elbow: L15: 15 x 15mm, L18: 18 x 18mm, L22: 22 x 22mm, L28: 28 x 28mm, L35: 35 x 35mm, L42: 42 x 42mm, L54: 54 x 54mm. Female threaded elbow: L15х1/2"N: 15 x ½” BSP (F), L18х1/2"N: 18 x ½” BSP (F), L18х3/4"N: 18 x ¾” BSP (F), L22х1/2"N: 22 x ½” BSP (F), L22х3/4"N: 22 x ¾” BSP (F), L28х3/4"N: 28 x ¾” BSP (F), L35х1"N: 35 x 1” BSP (F). Male threaded elbow: L15x1/2"W: 15 x ½” BSP (M), L18х1/2"W: 18 x ½” BSP (M), L18х3/4"W: 18 x ¾” BSP (M), L22x1/2"W: 22 x ½” BSP (M), L22x3/4"W: 22 x ¾” BSP (M), L28x3/4"W: 28 x ¾” BSP (M), L35x1"W: 35 x 1” BSP (M). Female threaded elbow with base: L15х1/2"N(a): 15 x ½” BSP (F), L18х1/2"N(a): 18 x ½” BSP (F), L22х1/2"N(a): 22 x ½” BSP (F), L22х3/4"N(a): 22 x ¾” BSP (F). 45°B Elbow: 45°L15a: 15 x 15mm, 45°L18а: 18 x 18mm, 45°L22a: 22 x 22mm, 45°L28a: 28 x 28mm, 45°L35a: 35 x 35mm, 45°L42а: 42 x 42mm, 45°L54а: 54 x 54mm. 45°A Elbow: 45°L15: 15 x 15mm, 45°L18: 18 x 18mm, 45°L22: 22 x 22mm, 45°L28: 28 x 28mm, 45°L35: 35 x 35mm, 45°L42: 42 x 42mm, 45°L54: 54 x 54mm. One end pipe bridge: Ω15a: 15 x 15mm, Ω18a: 18 x 18mm, Ω22a: 22 x 22mm. Pipe Bridge: Ω15: 15 x 15mm, Ω18: 18 x 18mm, Ω22: 22 x 22mm, Ω28: 28 x 28mm. Cap: D15: 15 x 15mm, D18: 18 x 18mm, D22: 22 x 22mm, D28: 28 x 28mm, D35: 35 x 35mm, D42: 42 x 42mm, D54: 54 x 54mm. Pipe: Mingshi Stainless Steel Pipe (To EN 10312) 15mm to 54mm.

Approval Holder:: Eduardo Alvarez LDA

Company Name
Eduardo Alvarez LDA
Address
Rua Central N. 24 Cabecas 2300-317 Tomar
Country
Portugal
Phone
0035 1919414508
General Email
trading.ealvarez@gmail.com

View All Listings by this Company

WRAS Approval Number: #2303406

Hyddro Range of stainless steel (SUS304/316L) crimp fittings incorporating EPDM ‘O’-rings. For use with Hyddro stainless steel pipes (SUS304/316L). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2303406
Size:: see model
Marking:: Hyddro by GFS, size & material on pipe and fitting body.
Installation Requirements:: R001
Expiry date:: 31/03/2028
Model:: Male threaded coupler: HYD-SS-MC-01 S15х1/2"W: 15 x ½” BSP (M) HYD-SS-MC-02 S15х3/4"W: 15 x ¾” BSP (M) HYD-SS-MC-03 S18х1/2"W: 18 x ½” BSP (M) HYD-SS-MC-04 S18х3/4"W: 18 x ¾” BSP (M) HYD-SS-MC-05 S22х1/2"W: 22 x ½” BSP (M) HYD-SS-MC-06 S22х3/4"W: 22 x ¾” BSP (M) HYD-SS-MC-07 S22х1"W: 22 x 1” BSP (M) HYD-SS-MC-08 S28х3/4"W: 28 x ¾” BSP (M) HYD-SS-MC-09 S28x1"W: 28 x 1” BSP (M) HYD-SS-MC-10 S35x1"W: 35 x 1” BSP (M) HYD-SS-MC-11 S35x1 1/4"W: 35 x 1¼” BSP (M) HYD-SS-MC-12 S42х1 1/2"W: 42 x 1½” BSP (M) HYD-SS-MC-13 S54х2"W: 54 x 2” BSP (M). Male threaded coupler with straight pipe: HYD-SS-MP-01 15х1/2"W: 15 x ½” BSP (M) HYD-SS-MP-02 15x3/4"W: 15 x ¾” BSP (M) HYD-SS-MP-03 18х1/2"W: 18 x ½” BSP (M) HYD-SS-MP-04 18х3/4"W: 18 x ¾” BSP (M) HYD-SS-MP-05 18x1"W: 18 x 1” BSP (M) HYD-SS-MP-06 22х1/2"W: 22 x ½” BSP (M) HYD-SS-MP-07 22х3/4"W: 22 x ¾” BSP (M) HYD-SS-MP-08 22x1"W: 22 x 1” BSP (M) HYD-SS-MP-09 28х3/4"W: 28 x ¾” BSP (M) HYD-SS-MP-10 28х1"W: 28 x 1” BSP (M) HYD-SS-MP-11 35х1 1/4"W: 35 x 1¼” BSP (M) HYD-SS-MP-12 42х1 1/2"W: 42 x 1½” BSP (M) HYD-SS-MP-13 54х2"W: 54 x 2” BSP (M). Female threaded coupler: HYD-SS-FC-01 S15х1/2"N: 15 x ½” BSP (F) HYD-SS-FC-02 S18х1/2"N: 18 x ½” BSP (F) HYD-SS-FC-03 S18х3/4"N: 18 x ¾” BSP (F) HYD-SS-FC-04 S22х1/2"N: 22 x ½” BSP (F) HYD-SS-FC-05 S22х3/4"N: 22 x ¾” BSP (F) HYD-SS-FC-06 S28х3/4"N: 28 x ¾” BSP (F) HYD-SS-FC-07 S28х1"N: 28 x 1” BSP (F) HYD-SS-FC-08 S35x1"N: 35 x 1” BSP (F) HYD-SS-FC-09 S35x1 1/4"N: 35 x 1¼” BSP (F) HYD-SS-FC-10 S42х1 1/2"N: 42 x 1½” BSP (F) HYD-SS-FC-11 S54х2"N: 54 x 2” BSP (F). Female threaded coupler with straight pipe: HYD-SS-FP-01 15х1/2"N: 15 x ½” BSP (F) HYD-SS-FP-02 15x3/4"N: 15 x ¾” BSP (F) HYD-SS-FP-03 18х1/2"N: 18 x ½” BSP (F) HYD-SS-FP-04 18х3/4"N: 18 x ¾” BSP (F) HYD-SS-FP-05 18x1"N: 18 x 1” BSP (F) HYD-SS-FP-06 22х1/2"N: 22 x ½” BSP (F) HYD-SS-FP-07 22х3/4"N: 22 x ¾” BSP (F) HYD-SS-FP-08 22x1"N: 22 x 1” BSP (F) HYD-SS-FP-09 28х3/4"N: 28 x ¾” BSP (F) HYD-SS-FP-10 28х1"N: 28 x 1” BSP (F) HYD-SS-FP-11 35х1 1/4"N: 35 x 1¼” BSP (F) HYD-SS-FP-12 42х1 1/2"N: 42 x 1½” BSP (F) HYD-SS-FP-13 54х2"N: 54 x 2” BSP (F). Coupler: HYD-SS-CP-01 S15: 15 x 15mm HYD-SS-CP-02 S18х15: 18 x 15mm HYD-SS-CP-03 S18: 18 x 18mm HYD-SS-CP-04 S22х18: 22 x 18mm HYD-SS-CP-05 S22х15: 22 x 15mm HYD-SS-CP-06 S22: 22 x 22mm HYD-SS-CP-07 S28х15: 28 x 15mm HYD-SS-CP-08 S28х22: 28 x 22mm HYD-SS-CP-09 S28: 28 x 28mm HYD-SS-CP-10 S35х28: 35 x 28mm HYD-SS-CP-11 S35: 35 x 35mm HYD-SS-CP-12 S42х35: 42 x 35mm HYD-SS-CP-13 S42: 42 x 42mm HYD-SS-CP-14 S54х42: 54 x 42mm HYD-SS-CP-15 S54: 54 x 54mm. Coupler with straight pipe: HYD-SS-SP-01 S18х15Ⅱ: 18 x 15mm HYD-SS-SP-02 S22х15Ⅱ: 22 x 15mm HYD-SS-SP-03 S22х18Ⅱ: 22 x 18mm HYD-SS-SP-04 S28х15Ⅱ: 28 x 15mm HYD-SS-SP-05 S28х18Ⅱ: 28 x 18mm HYD-SS-SP-06 S28х22Ⅱ: 28 x 22mm HYD-SS-SP-07 S35х15Ⅱ: 35 x 15mm HYD-SS-SP-08 S35х18Ⅱ: 35 x 18mm HYD-SS-SP-09 S35х22Ⅱ: 35 x 22mm HYD-SS-SP-10 S35х28Ⅱ: 35 x 28mm HYD-SS-SP-11 S42х22Ⅱ: 42 x 22mm HYD-SS-SP-12 S42х28Ⅱ: 42 x 28mm HYD-SS-SP-13 S42х35Ⅱ: 42 x 35mm HYD-SS-SP-14 S54х28Ⅱ: 54 x 28mm HYD-SS-SP-15 S54х35Ⅱ: 54 x 35mm HYD-SS-SP-16 S54х42Ⅱ: 54 x 42mm. Adjustable connector: HYD-SS-AC-01 S15Ⅱ: 15 x 15mm HYD-SS-AC-02 S18Ⅱ: 18 x 18mm HYD-SS-AC-03 S22Ⅱ: 22 x 22mm HYD-SS-AC-04 S28Ⅱ: 28 x 28mm HYD-SS-AC-05 S35Ⅱ: 35 x 35mm HYD-SS-AC-06 S42Ⅱ: 42 x 42mm HYD-SS-AC-07 S54Ⅱ: 54 x 54mm. Union: HYD-SS-UN-01 H15х1/2": 15 x ½” captive nut HYD-SS-UN-02 H15х3/4": 15 x ¾” captive nut HYD-SS-UN-03 H18х1/2": 18 x ½” captive nut HYD-SS-UN-04 H18х3/4": 18 x ¾” captive nut HYD-SS-UN-05 H22х1/2": 22 x ½” captive nut HYD-SS-UN-06 H22х3/4": 22 x ¾” captive nut HYD-SS-UN-07 H28х3/4": 28 x ¾” captive nut HYD-SS-UN-08 H28х1": 28 x 1” captive nut HYD-SS-UN-09 H35x1": 35 x 1” captive nut HYD-SS-UN-10 H35x1 1/4": 35 x 1¼” captive nut HYD-SS-UN-11 H42х1 1/2": 42 x 1½” captive nut HYD-SS-UN-12 H54х2": 54 x 2” captive nut Tee: HYD-SS-TE-01 T15: 15 x 15 x 15mm HYD-SS-TE-02 T18х15х18: 18 x 15 x 18mm HYD-SS-TE-03 T18: 18 x 18 x 18mm HYD-SS-TE-04 T22х18х22: 22 x 18 x 22mm HYD-SS-TE-05 T22х15х22: 22 x 15 x 22mm HYD-SS-TE-06 T22: 22 x 22 x 22mm HYD-SS-TE-07 T28x15x28: 28 x 15 x 28mm HYD-SS-TE-08 T28х22х22: 28 x 22 x 22mm HYD-SS-TE-09 T28x22x28: 28 x 22 x 28mm HYD-SS-TE-10 T28: 28 x 28 x 28mm HYD-SS-TE-11 T35x15x35: 35 x 15 x 35mm HYD-SS-TE-12 T35x22x35: 35 x 22 x 35mm HYD-SS-TE-13 T35x28x35: 35 x 28 x 35mm HYD-SS-TE-14 T35: 35 x 35 x 35mm HYD-SS-TE-15 T42х35х42: 42 x 35 x 42mm HYD-SS-TE-16 T42: 42 x 42 x 42mm HYD-SS-TE-17 T54х42х54: 54 x 42 x 54mm HYD-SS-TE-18 T54: 54 x 54 x 54mm. Female threaded Tee: HYD-SS-FT-01 T15х1/2"Nx15: 15 x ½” BSP (F) x 15mm HYD-SS-FT-02 T18х1/2"Nx18: 18 x ½” BSP (F) x 18mm HYD-SS-FT-03 T18х3/4"Nx18: 18 x ¾” BSP (F) x 18mm HYD-SS-FT-04 T22х1/2"Nx22: 22 x ½” BSP (F) x 22mm HYD-SS-FT-05 T22х3/4"Nx22: 22 x ¾” BSP (F) x 22mm HYD-SS-FT-06 T28х1/2"Nx28: 28 x ½” BSP (F) x 28mm HYD-SS-FT-07 T28х3/4"Nx28: 28 x ¾” BSP (F) x 28mm HYD-SS-FT-08 T28х1"Nx28: 28 x 1” BSP (F) x 28mm HYD-SS-FT-09 T35х1"Nx35: 35 x 1” BSP (F) x 35mm HYD-SS-FT-10 T35х1 1/4"Nx35: 35 x 1¼” BSP (F) x 35mm HYD-SS-FT-11 T42х1 1/2"Nх42: 42 x 1½” BSP (F) x 42mm HYD-SS-FT-12 T54х2"Nх54: 54 x 2” BSP (F) x 54mm. Male threaded Tee: HYD-SS-MT-01 T15х1/2"Wx15: 15 x ½” BSP (M) x 15mm HYD-SS-MT-02 T18х1/2"Wx18: 18 x ½” BSP (M) x 18mm HYD-SS-MT-03 T18х3/4"Wx18: 18 x ¾” BSP (M) x 18mm HYD-SS-MT-04 T22х1/2"Wx22: 22 x ½” BSP (M) x 22mm HYD-SS-MT-05 T22х3/4"Wx22: 22 x ¾” BSP (M) x 22mm HYD-SS-MT-06 T28х1/2"Wx28: 28 x ½” BSP (M) x 28mm HYD-SS-MT-07 T28х3/4"Wx28: 28 x ¾” BSP (M) x 28mm HYD-SS-MT-08 T28х1"Wx28: 28 x 1” BSP (M) x 28mm HYD-SS-MT-09 T35х1"Wx35: 35 x 1” BSP (M) x 35mm HYD-SS-MT-10 T35х1 1/4"Wx35: 35 x 1¼” BSP (M) x 35mm HYD-SS-MT-11 T42х1 1/2"Wх42: 35 x 1½” BSP (M) x 35mm HYD-SS-MT-12 T54х2"Wх54: 54 x 2” BSP (M) x 54mm. 90°B Elbow: HYD-SS-BE-01 L15a: 15 x 15mm HYD-SS-BE-02 L18а: 18 x 18mm HYD-SS-BE-03 L22a: 22 x 22mm HYD-SS-BE-04 L28a: 28 x 28mm HYD-SS-BE-05 L35a: 35 x 35mm HYD-SS-BE-06 L42а: 42 x 42mm HYD-SS-BE-07 L54а: 54 x 54mm. 90°A Elbow: HYD-SS-AE-01 L15: 15 x 15mm, HYD-SS-AE-02 L18: 18 x 18mm HYD-SS-AE-03 L22: 22 x 22mm HYD-SS-AE-04 L28: 28 x 28mm HYD-SS-AE-05 L35: 35 x 35mm HYD-SS-AE-06 L42: 42 x 42mm HYD-SS-AE-07 L54: 54 x 54mm. Female threaded elbow: HYD-SS-FE-01 L15х1/2"N: 15 x ½” BSP (F) HYD-SS-FE-02 L18х1/2"N: 18 x ½” BSP (F) HYD-SS-FE-03 L18х3/4"N: 18 x ¾” BSP (F) HYD-SS-FE-04 L22х1/2"N: 22 x ½” BSP (F) HYD-SS-FE-05 L22х3/4"N: 22 x ¾” BSP (F) HYD-SS-FE-06 L28х3/4"N: 28 x ¾” BSP (F) HYD-SS-FE-07 L35х1"N: 35 x 1” BSP (F). Male threaded elbow: HYD-SS-ME-01 L15x1/2"W: 15 x ½” BSP (M) HYD-SS-ME-02 L18х1/2"W: 18 x ½” BSP (M) HYD-SS-ME-03 L18х3/4"W: 18 x ¾” BSP (M) HYD-SS-ME-04 L22x1/2"W: 22 x ½” BSP (M) HYD-SS-ME-05 L22x3/4"W: 22 x ¾” BSP (M) HYD-SS-ME-06 L28x3/4"W: 28 x ¾” BSP (M) HYD-SS-ME-07 L35x1"W: 35 x 1” BSP (M). Female threaded elbow with base: HYD-SS-FB-01 L15х1/2"N(a): 15 x ½” BSP (F) HYD-SS-FB-02 L18х1/2"N(a): 18 x ½” BSP (F) HYD-SS-FB-03 L22х1/2"N(a): 22 x ½” BSP (F) HYD-SS-FB-04 L22х3/4"N(a): 22 x ¾” BSP (F). 45°B Elbow: HYD-SS-OBE-01 45°L15a: 15 x 15mm HYD-SS-OBE-02 45°L18а: 18 x 18mm HYD-SS-OBE-03 45°L22a: 22 x 22mm HYD-SS-OBE-04 45°L28a: 28 x 28mm HYD-SS-OBE-05 45°L35a: 35 x 35mm HYD-SS-OBE-06 45°L42а: 42 x 42mm HYD-SS-OBE-07 45°L54а: 54 x 54mm. 45°A Elbow: HYD-SS-OAE-01 45°L15: 15 x 15mm HYD-SS-OAE-02 45°L18: 18 x 18mm HYD-SS-OAE-03 45°L22: 22 x 22mm HYD-SS-OAE-04 45°L28: 28 x 28mm HYD-SS-OAE-05 45°L35: 35 x 35mm HYD-SS-OAE-06 45°L42: 42 x 42mm HYD-SS-OAE-07 45°L54: 54 x 54mm One end pipe bridge: HYD-SS-PCO-01 Ω15a: 15 x 15mm HYD-SS-PCO-02 Ω18a: 18 x 18mm HYD-SS-PCO-03 Ω22a: 22 x 22mm Pipe Bridge: HYD-SS-FCO-01 Ω15: 15 x 15mm HYD-SS-FCO-02 Ω18: 18 x 18mm HYD-SS-FCO-03 Ω22: 22 x 22mm HYD-SS-FCO-04 Ω28: 28 x 28mm. Cap: HYD-SS-CAP-01 D15: 15 x 15mm HYD-SS-CAP-02 D18: 18 x 18mm HYD-SS-CAP-03 D22: 22 x 22mm HYD-SS-CAP-04 D28: 28 x 28mm HYD-SS-CAP-05 D35: 35 x 35mm HYD-SS-CAP-06 D42: 42 x 42mm HYD-SS-CAP-07 D54: 54 x 54mm Pipe: HYD-SS-PI-15 15mm HYD-SS-PI-22 22mm HYD-SS-PI-28 28mm HYD-SS-PI-35 35mm HYD-SS-PI-42 42mm HYD-SS-PI-54 54mm

Approval Holder:: Merchant Supplies Distribution Ltd

Company Name
Merchant Supplies Distribution Ltd
Address
Unit 2 Merlin Centre Acrewood Way St. Albans
Postcode
AL4 OJY
Phone
0203 915 2557
General Email
murat@gfsflex.com

View All Listings by this Company

WRAS Approval Number: #2211363

Solder ring brass fittings for use with copper tube (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1115 Fittings for use with Tube and Pipe
Section Subtitle:: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2211363
Size:: Solder ring: 15mm-54mm (see model). Threaded connections: ¼”-2” BSP (see model).
Marking:: HAILIANG, size & PN on body.
Installation Requirements:: R001
Expiry date:: 30/11/2027
Model:: LF3015 CORE 15mm X 1/2" Male Adaptor Brass Solder Ring LF3022 CORE 22mm X 3/4" Male Adaptor Brass Solder Ring LF3028 CORE 28mm X 1" Male Adaptor Brass Solder Ring

Approval Holder:: Smith Brothers Stores Limited

Company Name
Smith Brothers Stores Limited
Address
Unit V2 Winchester Avenue, Blaby, Leicester
Postcode
LE8 4GZ

View All Listings by this Company
Manufacturer:: Zhejiang Hailiang Co., Ltd

Company Name
Zhejiang Hailiang Co., Ltd
Address
Diankou Zhuji Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #250504026

Range of brass fittings with compression connections to be used with copper pipes EN 1057. For above ground use only. Maximum working pressure 6.0 bar. Maximum operating temperature 95°C.

Section:: 1140 Fittings for use with Tube and Pipe
Section Subtitle:: Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250504026
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Marking:: Bonfix on body. Bonfix, size & product info on compression nut.
Installation Requirements:: R001
Expiry date:: 31/05/2030
Model:: Double straight fittings 82473 10 x 10 82537 12 x 12 82530 15 x 15 82851 18 x 18 82531 22 x 22 82532 28 x 28 82534 35 x 35 82535 42 x 42 82539 54 x 54 Male straight fitting 81103 3/8"x10 82543 3/8"x12 82740 3/8"x15 81113 1/2"x10 82528 1/2"x12 82741 1/2"x15 52491 1/2"x18 82529 1/2"x22 82742 3/4"x15 82492 3/4"x18 82743 3/4"x22 82556 3/4"x28 82744 1"x22 82745 1"x28 82474 5/4"x35 82548 3/2"x42 82549 2"x54 Female straight fitting 99029 3/8"x10 82586 3/8"x12 82575 3/8"x15 81217 1/2"x10 82748 1/2"x12 82581 1/2"x15 52574 1/2"x18 82577 1/2"x22 82749 3/4"x15 52750 3/4"x18 82582 3/4"x22 82585 1"x22 82583 1"x28 82475 5/4"x35 82588 3/2"x42 82589 2" x 54 Reduced straight fitting 82471 12 x 10 82538 15 x 10 82472 15 x 12 52746 18 x 15 82533 22 x 15 82536 28 x 22 82467 35 x 15 82468 35 x 22 SIDE Female TEE 82611 15 x 15 x 1/2" 82641 22 x 22 x 1/2" 82648 22 x 22 x 3/4" TEE ELBOW 82760 15 x 15 x 15 82763 22 x 15 x 15 82762 22 x 15 x 22 82761 22 x 22 x 22 TEE 82453 10x10x10 82452 12x12x12 82501 15x15x15 52871 18x18x18 82502 22x22x22 82503 28x28x28 82516 35x35x35 82517 42x42x42 82451 54x54x54 FEMALE TEE 99952 12x1/2"x12 82645 15x3/8"x15 82646 15x1/2"x15 82791 18x1/2"x18 82792 18x3/4"x18 82640 22x1/2"x22 82647 22x3/4"x22 82642 28x1/2"x28 82643 28x3/4"x28 REDUCED TEE 82454 12x15x12 82455 15x12x12 82456 15x12x15 82457 15x15x12 82504 15x22x15 82506 22x15x15 82505 22x15x22 82507 22x22x15 82519 22x28x22 82458 28x15x22 82508 28x15x28 82459 28x22x15 82513 28x22x22 82514 28x22x28 82509 28x28x15 82515 28x28x22 82476 35x15x35 82477 35x22x35 82478 35x28x35 SIDE M. TEE 82613 15x15x1/2" 82612 22x22x3/4" 82614 22x22x1" 82615 28x28x1"
DOUBLE ELBOW 82527 10x10 82526 12x12 82520 15x15 82861 18x18 82521 22x22 82522 28x28 82523 35x35 82524 42x42 82525 54x54 MALE ELBOW 82804 3/8" x 10 82701 3/8" x 12 82617 3/8" x 15 81811 1/2"x 10 82703 1/2" x 12 82700 1/2" x 15 52566 1/2" x 18 82709 1/2" x 22 82704 3/4" x 15 52862 3/4" x 18 82702 3/4" x 22 82705 3/4" x 28 82706 1 " x 22 82707 1 " x 28 82721 1"1/4x35 82722 1"1/2x42 82723 2"x54 FEMALE ELBOW 82404 3/8" x 10 82598 3/8" x 12 82605 3/8" x 15 82407 1/2" x 10 82596 1/2" x 12 82591 1/2" x 15 52863 1/2" x 18 82595 1/2" x 22 82482 3/4" x 15 52864 3/4" x 18 82592 3/4" x 22 82597 3/4" x 28 82594 1 " x 22 82593 1 " x 28 82559 1"1/4x35 82603 1"1/2x42 WALLPLATE ELBOW 52569 1/2" x 12 82570 1/2" x 15 82469 1/2" x 22 82572 3/4" x 15 82573 3/4" x 22 REDOUBLE ELBOW 82462 12 x 10 82461 15 x 10 82463 15 x 12 82464 22 x 15 82479 28 x 15 82481 28 x 22 ADAPTER ELBOW 84400 15 x 15u CROSS 82510 15 x 15 x 15 x 15 82511 22 x 22 x 22 x 22 82512 28 x 28 x 28 x 28 MALE CAP 82493 10 82494 12 82495 15 82496 22 82497 28 82498 35 CROSS R. 82518 22 x 15 x 22 x 15 82616 22 x 15 x 15 x 15 MALE WALLPLATE ELBOW 82571 3/4" x 15 MALE STRAIGHT FOR RAD. 82800 1/2""x15 DOUBLE ELBOW WITH VENT 82771 22 x 22 ELBOW FOR RAD 82790 1/2"x15

Approval Holder:: Bonfix B.V.

Company Name
Bonfix B.V.
Address
Holsteinstraat 4 8028 RT Zwolle (N1) The Netherlands
General Email
info@bonfix.nl

View All Listings by this Company

WRAS Approval Number: #250415020

Range of brass compression fittings for use with copper pipes and Irish copper pipe (both manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperatures: 32612, 32634, 32712 & 32734 models: 65°C. All other models: 85°C.

Section:: 1150 Fittings for use with Tube and Pipe
Section Subtitle:: Compression, metal, for use with copper tube - above ground use only.
WRAS Approval Number:: 250415020
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: Excel & size on compression nut
Installation Requirements:: R001
Expiry date:: 30/04/2030
Model:: 31012 1/2” Straight Coupler CxC 31034 3/4” Straight Coupler CxC 3101 1” Straight Coupler CxC 310114 11/4” Straight Coupler CxC 310112 11/2” Straight Coupler CxC 3102 2” Straight Coupler CxC 3103412 3/4"*1/2" Straight Coupler CxC 3101X12 1"*1/2" Straight Coupler CxC 310134 1"*3/4" Straight Coupler CxC 31011434 11/4"*3/4" Straight Coupler CxC 3101141 11/4"*1" Straight Coupler CxC 3101012 1/2"*10mm Straight Coupler CxC 3101212 1/2"*12mm Straight Coupler CxC 3101512 1/2"*15mm Straight Coupler CxC 3102234 3/4"*22mm Straight Coupler CxC 31012L 1/2"*1/2" Repair Coupling CXC 31034L 3/4"*3/4" Repair Coupling CXC 31112 1/2" Straight Coupler M.I. X C 31134 3/4"Straight Coupler M.I. X C 3111 1"Straight Coupler M.I. X C 311114 11/4"Straight Coupler M.I. X C 311112 11/2"Straight Coupler M.I. X C 3112 2"Straight Coupler M.I. X C 3111234 1/2"M*3/4"Straight Coupler M.I. X C 3113412 3/4"M*1/2"Straight Coupler M.I. X C 311134 1"M*3/4"Straight Coupler M.I. X C 311341 3/4"M*1"Straight Coupler M.I. X C 3111114 1"M*1.1/4"Straight Coupler M.I. X C 3111141 11/4"M*1"Straight Coupler M.I. X C 311112114 11/2"M*11/4"Straight Coupler M.I. X C 3112112 2"M*1 1/2"Straight Coupler M.I. X C 31212 1/2"Straight Coupler F.I. x C 31234 3/4"Straight Coupler F.I. x C 3121 1"Straight Coupler F.I. x C 312114 11/4"Straight Coupler F.I. x C 312112 11/2"Straight Coupler F.I. x C 3122 2"Straight Coupler F.I. x C 3121234 1/2"F*3/4"Straight Coupler F.I. x C 3123412 3/4"F*1/2"Straight Coupler F.I. x C 312134 1"F*3/4"Straight Coupler F.I. x C 312341 3/4"F*1"Straight Coupler F.I. x C 3121141 11/4"F*1"Straight Coupler F.I. x C 3121114 1“F*11/4"Straight Coupler F.I. x C 3122112 2“F*11/2"Straight Coupler F.I. x C 32612 1/2"Swivel Coupler F.I. x C 32634 3/4"Swivel Coupler F.I. x C 31512 1/2"Elbow C x C 31534 3/4"Elbow C x C 3151 1"Elbow C x C 315114 11/4"Elbow C x C 315112 11/2"Elbow C x C 3152 2"Elbow C x C 3153412 3/4"*1/2"Elbow C x C 315134 1"*3/4"Elbow C x C 3151512 1/2"*15mm Elbow C x C 3152234 3/4"*22mm Elbow C x C 31612 1/2" Elbow M.I. x C 31634 3/4"Elbow M.I. x C 3161 1"Elbow M.I. x C 316114 11/4"Elbow M.I. x C 316112 11/2"Elbow M.I. x C 3162 2"Elbow M.I. x C 3163412 3/4"M*1/2"Elbow M.I. x C 316134 1"M*3/4"Elbow M.I. x C 3161234 1/2"M*3/4"Elbow M.I. x C 316341 3/4"M*1"Elbow M.I. x C 31712 1/2" Elbow F.I. x C 31734 3/4"Elbow F.I. x C 3171 1"Elbow F.I. x C 317114 11/4"Elbow F.I. x C 317112 11/2"Elbow F.I. x C 3172 2"Elbow F.I. x C 3171234 1/2"F*3/4"Elbow F.I. x C 3173412 3/4"F*1/2"Elbow F.I. x C 317341 3/4"F*1"Elbow F.I. x C 317134 1"F*3/4"Elbow F.I. x C 317W12 1/2"F*1/2" Wallplate Elbow F.I. x C 317W34 3/4"F*3/4" Wallplate Elbow F.I. x C 317W1234 1/2"F*3/4" Wallplate Elbow F.I. x C 31812 1/2" Equal Tees CxCxC 31834 3/4" Equal Tees CxCxC 3181 1" Equal Tees CxCxC 318114 11/4" Equal Tees CxCxC 318112 11/2" Equal Tees CxCxC 3182 2" Equal Tees CxCxC 3181234 1/2"*1/2"*3/4"Reducing Tee C x C x C 3183412 3/4"*3/4"*1/2"Reducing Tee C x C x C 318341 3/4"*3/4"*1"Reducing Tee C x C x C 3181112 1"*1"*1/2"Reducing Tee C x C x C 3181134 1"*1"*3/4"Reducing Tee C x C x C 31811412 1 1/4"*1 1/4"*1/2"Reducing Tee C x C x C 31811434 1 1/4"*1 1/4"*3/4"Reducing Tee C x C x C 3181141 1 1/4"*1 1/4"*1"Reducing Tee C x C x C 31811234 1 1/2"*1 1/2"*3/4"Reducing Tee C x C x C 318112X1 1 1/2"*1 1/2"*1"Reducing Tee C x C x C 318112114 1 1/2"*1 1/2"*1 1/4"Reducing Tee C x C x C 318341234 3/4"*1/2"*3/4"Reducing Tee C x C x C 3181121 1"*1/2"*1"Reducing Tee C x C x C 3181X1234 1"*1/2"*3/4"Reducing Tee C x C x C 3181341 1"*3/4"*1"Reducing Tee C x C x C 318341212 3/4"*1/2"*1/2"Reducing Tee C x C x C 31813434 1"*3/4"*3/4"Reducing Tee C x C x C 31813412 1"*3/4"*1/2"Reducing Tee C x C x C 31811212 1"*1/2"*1/2"Reducing Tee C x C x C 318101012 10mm*10mm*1/2"Reducing Tee C x C x C 318121010 1/2"*10mm*10mm Reducing Tee C x C x C 318121012 1/2"*10mm*1/2"Reducing Tee C x C x C 318121210 1/2"*1/2"*10mm Reducing Tee C x C x C 32212 1/2" Cross CxCxCxC 32234 3/4"Cross CxCxCxC 3223412 3/4"*1/2"*1/2"*1/2"Cross CxCxCxC 32712 1/2" Swivel Elbow F.I. x C 32734 3/4" Swivel Elbow F.I. x C 33012 1/2"Tee CxCxF.I. 33034 3/4"Tee CxCxF.I. 3301 1"Tee CxCxF.I. 3303412 3/4"*3/4"*1/2"F Tee CxCxF.I. 330112 1"*1"*1/2"F Tee CxCxF.I. 330134 1"*1"*3/4"F Tee CxCxF.I. 3483412 3/4"*1/2" Reducing Set 348112 1"*1/2" Reducing Set 348134 1"*3/4" Reducing Set 34811412 11/4"*1/2" Reducing Set 34811434 11/4"*3/4" Reducing Set 3481141 11/4"*1" Reducing Set 34811212 11/2"*1/2" Reducing Set 34811234 11/2"*3/4" Reducing Set 3481121 11/2"*1" Reducing Set 348112114 11/2"*11/4" Reducing Set 348212 2"*1/2" Reducing Set 348234 2"*3/4" Reducing Set 34821 2"*1" Reducing Set 3482114 2"*11/4" Reducing Set 3482112 2"*11/2" Reducing Set 35012 1/2"Flanged Tank Connector with Backnut 35034 3/4"Flanged Tank Connector with Backnut 3501 1"Flanged Tank Connector with Backnut 350114 11/4"Flanged Tank Connector with Backnut 350112 11/2"Flanged Tank Connector with Backnut 3502 2"Flanged Tank Connector with Backnut 35112 1/2"Stop End 35134 3/4"Stop End 3511 1"Stop End 351114 11/4"Stop End 351112 11/2"Stop End 3512 2"Stop End 37212 1/2"Blank Cap and Washers 37234 3/4"Blank Cap and Washers 3721 1"Blank Cap and Washers 372114 11/4"Blank Cap and Washers 372112 11/2"Blank Cap and Washers 3722 2"Blank Cap and Washers 378A12 1/2"Coupling Nut 378A34 3/4"Coupling Nut 378A1 1"Coupling Nut 378A114 11/4"Coupling Nut 378A112 11/2"Coupling Nut 378A2 2"Coupling Nut 378B12 1/2"Compression Ring 378B34 3/4"Compression Ring 378B1 1"Compression Ring 378B114 11/4"Compression Ring 378B112 11/2"Compression Ring 378B2 2"Compression Ring

Approval Holder:: Excel Industries Ltd

Company Name
Excel Industries Ltd
Address
Coolmine Industrial Estate Clonsilla Road Dublin 15
Postcode
D15N704
Country
Ireland
Phone
+35 31811 8701
General Email
stephen.hope@excel-industries.com

View All Listings by this Company

WRAS Approval Number: #250602034

‘Instantor Lead-Free Brass’ compression fittings with DZR brass body, for use with DZR Copper tube (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:: 1150 Fittings for use with Tube and Pipe
Section Subtitle:: Compression, metal, for use with copper tube - above ground use only.
WRAS Approval Number:: 250602034
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model.
Marking:: Instantor, size & standard on nut. LF & CR on body.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: 310001LF Lead Free No 310 1/2" Straight Coupler C x C 310002LF Lead Free No 310 3/4" Straight Coupler C x C 310003LF Lead Free No 310 1" Straight Coupler C x C 310021LF Lead Free No 310 3/4" x 1/2" Straight Coupler C x C 310032LF Lead Free No 310 1" x 3/4" Straight Coupler C x C 311001LF Lead Free No 311 1/2" Straight Coupler MI x C 311002LF Lead Free No 311 3/4" Straight Coupler MI x C 311003LF Lead Free No 311 1" Straight Coupler MI x C 311012LF Lead Free No P311 1/2" x 3/4" Straight Coupler MI x C 311021LF Lead Free No 311 3/4" x 1/2" Straight Coupler MI x C 311032LF Lead Free No 311 1" x 3/4" Straight Coupler MI x C 312001LF Lead Free No 312 1/2" Straight Coupler FI x C 312002LF Lead Free No 312 3/4" Straight Coupler FI x C 312003LF Lead Free No 312 1" Straight Coupler FI x C 312021LF Lead Free No 312 3/4" x 1/2" Straight Coupler FI x C 312032LF Lead Free No 312 1" x 3/4" Straight Coupler FI x C 315001LF Lead Free No 315 1/2" Elbow C x C 315002LF Lead Free No 315 3/4" Elbow C x C 315003LF Lead Free No 315 1" Elbow C x C 316001LF Lead Free No 316 1/2" Elbow MI x C 316002LF Lead Free No 316 3/4" Elbow MI x C 316003LF Lead Free No 316 1" Elbow MI x C 317001LF Lead Free No 317 1/2" Elbow FI x C 317002LF Lead Free No 317 3/4" Elbow FI x C 317003LF Lead Free No 317 1" Elbow FI x C 318001LF Lead Free No 318 1/2" Equal Tee 318002LF Lead Free No 318 3/4" Equal Tee 318003LF Lead Free No 318 1" Equal Tee 318212LF Lead Free No 318 3/4" x 1/2" x 3/4" Red Tee 318221LF Lead Free No 318 3/4" x 3/4" x 1/2" Red Tee 318331LF Lead Free No 318 1" x 1" x 1/2" Red Tee 318332LF Lead Free No 318 1" x 1" x 3/4" Red Tee 319001LF Lead Free No 317W 1/2" Wallplate Elbow 330001LF Lead Free No 330 1/2" Tee C x C x FI 330002LF Lead Free No 330 3/4" Tee C x C x FI 351001LF Lead Free No 351 1/2" Stop End 351002LF Lead Free No 351 3/4" Stop End 351003LF Lead Free No 351 1" Stop End 410001LF Lead Free No 310 15mm Straight Coupler C x C 410002LF Lead Free No 310 22mm Straight Coupler C x C 410003LF Lead Free No 310 28mm Straight Coupler C x C 410021LF Lead Free No 310 22mm x 15mm"Straight Coupler C x C 410032LF Lead Free No 310 28mm x 22mm Straight Coupler C x C 411001LF Lead Free No 311 15mm Straight Coupler MI x C 411002LF Lead Free No 311 22mm Straight Coupler MI x C 411003LF Lead Free No 311 28mm Straight Coupler MI x C 411012LF Lead Free No 311 15mm x 22mm Straight Coupler C x MI x 411021LF Lead Free No P311 22mm x 15mm Straight Coupler C x MI 411023LF Lead Free No 311 22mm x 28mm Straight Coupler C x MI 412001LF Lead Free No 312 15mm Straight Coupler FI x C 412002LF Lead Free No 312 22mm Straight Coupler FI x C 412003LF Lead Free No 312 28mm Straight Coupler FI x C 412012LF Lead Free No 312 15mm x 22mm Straight Coupler C x FI 412023LF Lead Free No 312 22mm x 28mm Straight Coupler FI x C 415001LF Lead Free No 315 15mm Elbow C x C 415002LF Lead Free No 315 22mm Elbow C x C 415003LF Lead Free No 315 28mm Elbow C x C 416001LF Lead Free No 316 15mm Elbow MI ) x C 416002LF Lead Free No 316 22mm Elbow MI x C 416003LF Lead Free No 316 28mm Elbow MI x C 417001LF Lead Free No 317 15mm Elbow FI x C 417002LF Lead Free No 317 22mm Elbow FI x C 417003LF Lead Free No 317 28mm Elbow FI x C 418001LF Lead Free No 318 15mm Equal Tee 418002LF Lead Free No 318 22mm Equal Tee 418003LF Lead Free No 318 28mm Equal Tee 418212LF Lead Free No 318 22mm x 15mm x 22mm Red Tee 418221LF Lead Free No 318 22mm x 22mm x 15mm Red Tee 418331LF Lead Free No 318 28mm x 28mm x 15mm Red Tee 418332LF Lead Free No 318 28mm x 28mm x 15mm Red Tee 419001LF Lead Free No 317W 15mm Wallplate Elbow 430001LF Lead Free No 330 15mm x 15mm x 1/2" Tee C x C x FI 430002LF Lead Free No 330 22mm x 22mm x 3/4" Tee C x C x FI 451001LF Lead Free No 351 15mm Stop End 451002LF Lead Free No 351 22mm Stop End 451003LF Lead Free No 351 28mm Stop End

Approval Holder:: Sanbra Fyffe Ltd.

Company Name
Sanbra Fyffe Ltd.
Address
Conex Works, Santry Avenue, Dublin
Postcode
D09 K160
Country
Ireland
Phone
353 1 842 6255
General Email
sales@sanbra.ie

View All Listings by this Company

WRAS Approval Number: #2309384

Range of copper or brass (see model) end feed fittings for use with copper tube (manufactured to BS EN1057). Tap connectors incorporate Fibre/NBR washers. Male and female union adaptors incorporate a silicone gasket. Maximum working pressure using hard solder: 8mm to 28mm, ½” to 1” BSP (F) or (M), 1” straight cylinder union and captive nut ½” to ¾”: 25.0 bar, 35mm to 54mm, 1¼” to 2” BSP (F) or (M): 16.0 bar. Maximum working pressure using silver brazing alloy EN1044: 66.7mm to 108mm, 2½” to 4” BSP (F) or (M): 16.0 bar, 133mm to 219mm: 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 1210 Fittings for use with Tube and Pipe
Section Subtitle:: End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2309384
Size:: See model.
Marking:: Lawton tubes logo, EN1254 and size on body.
Installation Requirements:: R001
Expiry date:: 30/09/2028
Model:: SB-EFCOMI0151/2 CORE 15mm X 1/2" Male Adaptor Brass N3015 SB-EFCOMI0153/4 CORE 15mm X 3/4" Male Adaptor Brass SB-EFCOMI0223/4 CORE 22mm X 3/4" Male Adaptor Brass N3022 SB-EFCOMI0281 CORE 28mm X 1" Male Adaptor Brass N3028 SB-EFCOMI03511/4 CORE 35mm X 1.1/4" Male Adaptor Brass SB-EFCOMI04211/2 CORE 42mm X 1.1/2" Male Adaptor Brass SB-EFCOMI0542 CORE 54mm X 2" Male Adaptor Brass SB-EFCP015 CORE 15mm Coupler EF N1015 SB-EFCP022 CORE 22mm Coupler EF N1022 SB-EFCP028 CORE 28mm Coupler EF N1028 SB-EFCP035 CORE 35mm Coupler EF SB-EFCP042 CORE 42mm Coupler EF SB-EFCP054 CORE 54mm Coupler EF SB-EFCP06 CORE 66.7mm Coupler EF SB-EFCP076 CORE 76.1mm Coupler EF SB-EFCP108 CORE 108mm Coupler EF SB-EFEC015 CORE 15mm End Cap EF N61015 SB-EFEL015 CORE 15mm 90° Elbow EF N12015 SB-EFEL022 CORE 22mm 90° Elbow EF N12022 SB-EFEL028 CORE 28mm 90° Elbow EF N12028 SB-EFEL035 CORE 35mm 90° Elbow EF N12035 SB-EFEL042 CORE 42mm 90° Elbow EF SB-EFEL054 CORE 54mm 90° Elbow EF SB-EFEL067 CORE 66.7mm 90° Elbow EF SB-EFEL076 CORE 76.1mm 90° Elbow EF SB-EFEL108 CORE 108mm 90° Elbow EF SB-EFELS015 CORE 15mm 90° Street Elbow EF N12S015 SB-EFELS022 CORE 22mm 90° Street Elbow EF N12S022 SB-EFRED02215 CORE 22mm X 15mm Fitting Reducer EF N6022015 SB-EFRED02822 CORE 28mm X 22mm Fitting Reducer EF N6028022 SB-EFTE015 CORE 15mm Equal Tee EF N24015 SB-EFTE022 CORE 22mm Equal Tee EF N24022 SB-EFTE028 CORE 28mm Equal Tee EF SB-EFTE035 CORE 35mm Equal Tee EF SB-EFTE042 CORE 42mm Equal Tee EF SB-EFTE054 CORE 54mm Equal Tee EF SB-EFTE067 CORE 66.7mm Equal Tee EF SB-EFTE076 CORE 76.1mm Equal Tee EF SB-EFTE108 CORE 108mm Equal Tee EF SB-EFTE0221522 CORE 22mm X 15mm X 22mm Reducer Tee EF N26022015022 SB-EFTE0222215 CORE 22mm X 22mm X 15mm Reducer Tee EF N25022015

Approval Holder:: Smith Brothers Stores Limited

Company Name
Smith Brothers Stores Limited
Address
Unit V2 Winchester Avenue, Blaby, Leicester
Postcode
LE8 4GZ

View All Listings by this Company
Manufacturer:: The Lawton Tube Company Ltd.

Company Name
The Lawton Tube Company Ltd.
Address
Torrington Avenue, Tile Hill, Coventry
Postcode
CV4 9AB
Phone
+44 24 7646 6203 or 024 7646 6203

View All Listings by this Company

WRAS Approval Number: #250604707

Electric instantaneous, vented, mains water heater. Maximum operating temperature 98°C. Cold supply only.

Section:: 1365 Heaters
Section Subtitle:: Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:: 250604707
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M).
Marking:: Ellsi, model, technical data on adhesive label on body.
Installation Requirements:: R001 R040
Expiry date:: 30/06/2030
Model:: PDT-000930.

Approval Holder:: Ellsi Limited

Company Name
Ellsi Limited
Postcode
DN15 8SL
Country
United Kingdom
General Email
martin@ellsi.co.uk

View All Listings by this Company

WRAS Approval Number: #250504712

Range of counter-top or under-sink electrical water heaters. Maximum working pressure 6.5 bar. Maximum operating temperature 75°C, except 65°C for 10L models.

Section:: 1390 Heaters
Section Subtitle:: Electric, thermal storage, mains fed, open outlet.
WRAS Approval Number:: 250504712
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1/2” BSP (M)
Marking:: Midea logo on body. Midea logo, Capacity, Model No.,Pressure, Other tech info on data label on body
Installation Requirements:: R001
Expiry date:: 31/05/2030
Model:: Da-bcd a = Volume (available in 10, 15 & 30), b = Rated power (available in 20 & 30, 20 stands for 2kW, 30 for 3kW), c = Cover type (available in VD, VD2 & VD3), d = Installation position (available in O & U, O stands for over sink, U stands for under sink) Where a typical code is: ①D10-20VDO: 10 = volume (L) 20 = rated power (2kW) VD = the type of cover O = over sink range ②D30-30VD3U: 30 = volume (L) 30 = rated power (3kW) VD3 = the type of cover U = under sink range

Approval Holder:: Wuhu Midea Kitchen & Bath Appliances Manufacturing Co., Ltd.

Company Name
Wuhu Midea Kitchen & Bath Appliances Manufacturing Co., Ltd.
Address
Wanchun East Road Economic and Technological Development Zone Wuhu City Anhui Province
Country
China

View All Listings by this Company

WRAS Approval Number: #250504715

Range of counter-top or under-sink electrical water heaters. Maximum working pressure 6.5 bar. Maximum operating temperature 75°C, except 65°C for 10L models.

Section:: 1390 Heaters
Section Subtitle:: Electric, thermal storage, mains fed, open outlet.
WRAS Approval Number:: 250504715
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1/2” BSP (M)
Marking:: Flomasta on body & week of manufacture & other tech info on data label.
Installation Requirements:: R001
Expiry date:: 31/05/2030
Model:: D10-20VD3 (5063022583697) 10L 2kw VD3 cover D15-20VD3 (5063022583680) 15L 2kw VD3 cover D15-30VD3 (5063022583710) 15L 3kw VD3 cover D30-30VD3 (5063022583703) 30L 3kw VD3 cover

Approval Holder:: Kingfisher International Products Ltd.

Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

WRAS Approval Number: #250602716

Range of wall hung, gas-fired condensing combination boilers providing domestic hot water via a plate heat exchanger. The pressurised central heating system incorporates an expansion vessel and pressure relief valve set at 3.0 bar. Some models, please refer to model below, incorporate only a primary circuit. Maximum working pressures: Primary circuit: 2.5 bar, Secondary circuit 10.0 bar. Maximum operating temperature both circuits: 60°C.

Section:: 1465 Heaters
Section Subtitle:: Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:: 250602716
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Marking:: Warmhaus on front panel. Warmhaus, product name and operating info on label on side panel
Installation Requirements:: R001 R140 R360
Expiry date:: 30/06/2030
Model:: Following models are ¾” BSP M inlet/outlet primary circuit, ½” BSP M inlet/outlet secondary circuit. KM0725250101005901 EWA 2525C 25KW KM0725300101005901 EWA 2530 C 30 KW KM0725310303008701 MINERWA 25/31 COMBI BOILER IE (BLACK) KM0725300201008901 ENERWA PLUS 2530 C - UK KM0325300201001301 ENERWA PLUS 2530 C - UK + FLUE KIT KM0730350201008901 ENERWA PLUS 3035 C - UK KM0330350201001301 ENERWA PLUS 3035 C + F.KIT - DHW 35 - UK KM0735400201008901 ENERWA PLUS 3540 C - UK KM0335400201001301 ENERWA PLUS 3540 C - UK KOMBI KM0742400201001301 ENERWA PLUS 4240 C 40 KW - UK KM0745430201001301 ENERWA PLUS 4543 C 43 KW - UK KM0725310303009801 EXP.MINERWA 25 SYSTEM BOLER (BLACK) KM1220240101012201 GLOWA 2024 KM1224260101012201 GLOWA 2426 KM1228300101012201 GLOWA 2830 KM1233350101012201 GLOWA 3335 KM1220240101012401 GLOWA SMART 20/24 20KW KM1224260101012401 GLOWA SMART 24/26 24KW KM1228300101012401 GLOWA SMART 28/30 28KW KM1233350101012401 GLOWA SMART 33/35 33KW Following models are ¾” BSP M inlet/outlet and are primary circuit only KM1024000201005501 EXP.ENERWA PLUS H.O 2500H KM1024000201010201 EXP. WARMHAUS ENERWA PLUS H.O 2500H - UK KM1028000201005501 EXP.WARMHAUS ENERWA PLUS H.O 3000H KM1028000201010201 EXP.WARMHAUS ENERWA PLUS H.O 3000H - UK KM1033000201005501 EXP.WARMHAUS ENERWA PLUS H.O 3500H KM1033000201010201 EXP.WARMHAUS ENERWA PLUS H.O 3500H - UK KM1133000201005501 EXP.WARMHAUS ENERWA PLUS H.O 3500H+F.KIT KM1133000201006201 EXP.WARMHAUS ENERWAPLUS HO 3500H-D+F.KIT KM1142000201005501 ENERWA PLUS H.O 4200H KM1145000201005501 ENERWA PLUS H.O 4500H KM1220000101012301 GLOWA 20 H.O. KM1224000101012301 GLOWA 24 H.O. KM1228000101012301 GLOWA 28 H.O. KM1233000101012301 GLOWA 33 H.O.

Manufacturer:: Warmhaus Isitma VE Sogutma Sistemleri Sanayi Ticaret A.S.

Company Name
Warmhaus Isitma VE Sogutma Sistemleri Sanayi Ticaret A.S.
Address
Nilufer Organise Sanayi Bolgesi Selvi Cad No:3 Nilufer Bursa Turkey
Phone
+90-224-2959400

View All Listings by this Company

WRAS Approval Number: #2103043

Range of rotating piston, volumetric in-line water meters with brass bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 1505 Water Meters
Size:: ¾” BSP - 2” BSP (M) inlet and outlet.
Marking:: George Kent logo on lid. GKMV30, serial number, size, pressure and technical information on body housing rim.
Installation Requirements:: R001
Expiry date:: 31/03/2026
Model:: GKMV30 - DN15, 20, 25, 30 & 40

Approval Holder:: George Kent (Vietnam) Co Ltd

Company Name
George Kent (Vietnam) Co Ltd
Address
F3-6 (Area A), Lot A4, NA1 Street Thoi Hoa Industrial Park, Thoi Hoa Ward, Ben Cat City Binh Duong Province
Country
Vietnam
Phone
+84 274 3803 167
General Email
lhpan@georgekent.net

View All Listings by this Company

WRAS Approval Number: #2305096

GKMV30P range in-line volumetric water meters with black plastic bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 1505 Water Meters
Size:: See model.
Marking:: GKM branded logo on lid. Flow direction arrow, Meter type (GKMV30P) & additional information on Chamber Housing.
Installation Requirements:: R001
Expiry date:: 31/05/2028
Model:: GKMV30P Range: DN15: ¾" BSP (M) inlet and outlet, DN20: 1" BSP (M) inlet and outlet, DN25: 1¼" BSP (M) inlet and outlet.

Approval Holder:: George Kent (Vietnam) Co Ltd

Company Name
George Kent (Vietnam) Co Ltd
Address
F3-6 (Area A), Lot A4, NA1 Street Thoi Hoa Industrial Park, Thoi Hoa Ward, Ben Cat City Binh Duong Province
Country
Vietnam
Phone
+84 274 3803 167
General Email
lhpan@georgekent.net

View All Listings by this Company

WRAS Approval Number: #2305097

GKMV30P range in-line volumetric water meters with black plastic bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 1505 Water Meters
Size:: See model.
Marking:: GKM branded logo on lid. Flow direction arrow, Meter type (GKMV30P) & additional information on Chamber Housing.
Installation Requirements:: R001
Expiry date:: 31/05/2028
Model:: GKMV30P Range: DN15: ¾" BSP (M) inlet and outlet, DN20: 1" BSP (M) inlet and outlet, DN25: 1¼" BSP (M) inlet and outlet.

Approval Holder:: George Kent (Malaysia) Berhad

Company Name
George Kent (Malaysia) Berhad
Address
George Kent Technology Centre 1115 Jalan Puchong Taman Meranti Jaya 47120 Puchong Selangor
Country
Malaysia

View All Listings by this Company

WRAS Approval Number: #250602045

Range of water meters with brass and plastic bodies and plastic turbines. The inlet incorporates a plastic filter Maximum working pressure 16.0 Bar Maximum operating temperature 50.0°C

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” to 2 ½” BSP M (G models) DN 50 flanged (FL Models)
Marking:: Zenner logo, Model, ZR, CE, date of manufacture (YYYY) and other information on faceplate. Flow arrow and date of manufacture (YYYY) on body.
Installation Requirements:: R001 R008
Expiry date:: 30/06/2030
Model:: MTKD 2,5-165-G ¾ B (½) MTKD 4-190-G 1 B (¾) MTKD 6,3-260-G 1 ¼ B (1) MTKD 10-260-G 1 ¼ B (1) MTKD 10-260-G 1 ½ B (5/4) MTKD 16-300-G 2 B (6/4) MTKD 25-270-G 2 ½ B (2) MTKD 25-300- G 2 ½ B (2) MTKD 25-270-FL MTKD 25-300-FL MTKD-L 2,5-165-G ¾ B (½) MTKD-L 4-190-G 1 B (¾)

Manufacturer:: Zenner International Gmbh & Co. KG

Company Name
Zenner International Gmbh & Co. KG
Address
Heinrich‐Barth‐Str. 29, 66115 Saarbrücken, Germany
Country
Germany

View All Listings by this Company

WRAS Approval Number: #240902089

Range of ‘SureCal’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: RT – 1.1/4” BSP (M) to 2.1/4” BSP (M) RF – 48 mm OD
Marking:: 'SureCal' logo, Model, Voltage, Size and other information on label.
Installation Requirements:: R001
Expiry date:: 30/09/2029
Model:: Model Code: XXYZS Where XX denotes the boss type and can be replaced with any of the following: RT = Thread Type RF = Flange Type Where Y denotes the heating tube material and can be replaced with any of the following: 1 = Copper 2 = AISI 304 / AISI 304L 3 = AISI 321 4 = AISI 316 / AISI 316L 5 = Alloy 800 / Alloy 825 / Alloy 840 6 = Titanium 7 = AISI 309S 8 = AISI 310 Where Z denotes the brazing system and can be replaced with any of the following: A = Tin Alloy B = Silver Alloy C = Itek Brazing Where S denotes the surface enamelling and can be replaced with either of the following: S = Enamelled Blank = Not Enamelled

Approval Holder:: Thermowatt S.p.A.

Company Name
Thermowatt S.p.A.
Address
Via San Giovanni Battista 21 Arcevia
Postcode
60011
Country
Italy
Phone
+39 0731988246
General Email
thermowatt@legalmail.it

View All Listings by this Company

WRAS Approval Number: #250602705

Range of flow meters with plastic bodies. Maximum working pressure 8.0 bar Maximum operating temperature 40°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 3/8” BSP (F) x 3/8” BSP (M)
Marking:: BWT Logo on LCD display. Digmesa and flow arrow on body.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: 812486 (930-0074) Aquameter 3/8” with Relais. 812185 (938-A930/LE5117) Aquameter 3/8” with LCD Display. 812495 (938-A70/LE5113) Aquameter HF 3/8” with LCD Display.

Approval Holder:: BWT Holding GmbH

Company Name
BWT Holding GmbH
Address
Walter-Simmer-Straße 4 Mondsee
Postcode
5310
Country
Austria
Phone
+436648172152
General Email
andreas.stiegler@aidu.solutions

View All Listings by this Company

WRAS Approval Number: #250504706

Range of multi-stage semiaxial submersible pumps with stainless steel bodies and impellers. Please note, this approval does not cover the motor, motor connection kit or power cable necessary for the pump to operate. Open outlet use only. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250504706
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 140 SX models: 3” GAS FLANGED outlet conenection, 180 SX models: 5” GAS FLANGED outlet conenection, 230 SX models: 6” GAS FLANGED outlet conenection, 270 SX models: DN200 FLANGED outlet conenection.
Marking:: Panelli logo, model type, serial no., made in Italy, production date (MM/YY) and other techical info on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 31/05/2030
Proviso:: Open outlet use only.
Model:: 140 SX 34/XX, 140 SX 44/XX, 140 SX 54/XX, 140 SX 64/XX, 180 SX 102/ XX, 180 SX 124/XX, 180 SX 140/XX, 180 SX 78/XX, 180 SX 90/XX, 230 SX 200/XX (DRXX), 230 SX 220/XX (DRXX), 230 SX 240/XX (DRXX), 230 SX 280/XX (DRXX), 270 SX 370/XX (DRXX), 270 SX 440/XX (DRXX) (A). Where: 140-180-230-270 = pump diameter. 140: 6”, 180: 8”, 230: 10”, 270: 12”. SX: Semi-axial pump family. 34-440: Flow. /XX = Number of stages (XX will be replaced by 1 or 2 digits as follows). 140 SX 34: 3 to 27, 140 SX 44: 3 to 22, 140 SX 54: 3 to 22, 140 SX 64: 1 to 18, 180 SX 102: 1 to 15, 180 SX 124: 1 to 13, 180 SX 140: 1 to 12, 180 SX 78: 1 to 19, 180 SX 90: 1 to 17, 230 SX 200: 1 to 9, 230 SX 220: 1 to 7, 230 SX 240: 1 to 7, 230 SX 280: 1 to 7, 270 SX 370: 1 to 5, 270 SX 440: 1 to 5. Optional: DRXX = Impeller diameter reduction in mm. XX can either be 10 or 20. A = Impeller with corner reduction.

Approval Holder:: Panelli S.r.l.

Company Name
Panelli S.r.l.
Address
Via Rana 63/65 Z.I D5 Spinetta Marengo

View All Listings by this Company
Manufacturer:: Panelli S.r.l.

Company Name
Panelli S.r.l.
Address
Via Rana 63/65 Z.I D5 Spinetta Marengo

View All Listings by this Company

WRAS Approval Number: #250508702

STORMBOOST range of domestic water pressure booster pumps with brass impellors, brass bodies with accumulators, available from 60 – 300 litres (please refer to model). Models are supplied with reducing bushes, pressure gauges, pressure reducing valves and double check valve assemblies housed in DZR brass bodies with isolation valves and strainers. Maximum working pressure 4.5 bar. Maximum operating temperature 23°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250508702
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Stainless-steel braided TPS lined flexible hose assemblies with 15mm push fit connections, for use with copper, PB and PEX pipe.
Marking:: Stuart Turner, model number and technical information on adhesive label on pump.
Installation Requirements:: R001 R009 R415
Expiry date:: 31/05/2030
Model:: 47714 STORMBOOST 60 with 60 litre accumulator, 47715 STORMBOOST 80 with 80 litre accumulator, 47716 STORMBOOST 100 with 100 litre accumulator, 47717 STORMBOOST 200 with 200 litre accumulator, 47718 STORMBOOST 300 with 300 litre accumulator.

Approval Holder:: Stuart Turner Ltd

Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company

WRAS Approval Number: #250607701

’TP Series 300’ and ‘TPE Series 300’ ranges of single stage in-line pumps with black coloured cataphoretic electro deposition coated cast iron or ductile iron bodies and bronze, stainless-steel or black coloured cataphoretic electro deposition coated cast iron impellers. Pumps are available with BQQE or BBQE shaft seals. Maximum working pressure 16.0 bar. Maximum operating temperature 60°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250607701
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN32 - DN350 Flanged connections.
Marking:: Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, type, model, PN-SN no., technical info and manufacturing country on data plate on motor stool.
Installation Requirements:: R001 R415
Expiry date:: 30/06/2030
Model:: TP series 300: TP(E) XX-XXX/X [Blank] or S or NC - X or BX - F - A or B or S or O or Y or Q - XXXX * Where: TP = pump type with normal Asynchronous motor. TPE = pump type with E-motor (motor with integrated frequency driver). XX = nominal diameter of inlet and outlet ports, DN (32-350). XXX = maximum head [dm] (60-1050). /X = pole number (2, 4, 6). [Blank] or S or NC = Sensor options: [Blank] = without sensor, S = TPE with factory-fitted differential-pressure sensor, NC = TPE with Siemens/Nidec motor with integrated CUE (Grundfos brand of VSD). X or BX = B: Oversize motor, X: Special version. F = DIN flange. A or B or S or O or Y or Q = A: Basic version - Cast iron pump housing and impeller, B: Cast iron pump housing with bronze impeller, S: Cast iron pump housing with stainless steel impeller, O: Ductile cast iron pump housing with cast iron impeller, Y: Ductile cast iron pump housing with bronze impeller, Q = Ductile cast iron pump housing with stainless steel impeller. XXXX = shaft seal: BQQE or BBQE. * = Motor information, does not have any bearing on water contact parts.

Product Images

Approval Holder:: Grundfos Holding A/S

Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7 Bjerringbro
Postcode
DK-8850
Country
Denmark
Phone
+36302482216
General Email
oszilagyi@grundfos.com

View All Listings by this Company

WRAS Approval Number: #250312003

Range of shower handsets and overhead showers with plastic bodies (various finishes - see model) incorporating EPDM ‘O’-rings and washers. The inlet of the overhead shower models can be supplied with either a washer or a combined washer and stainless-steel strainer. Maximum operating temperature 65°C.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 250312003
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: Open outlet only
Marking:: Jelong, WRAS on handset body or connection.
Installation Requirements:: R001 R040
Expiry date:: 31/03/2030
Proviso:: Open outlet only
Model:: A12231* 3F hand shower A12232* 3F hand shower A12131* 3F hand shower A18311* 1F hand shower A12011* 1F hand shower A14431* 3F hand shower A14441* 4F hand shower A15241* 4F hand shower A15331* 3F hand shower B27811* 1F shower head B27012* 1F shower head B26111* 1F shower head B23111* 1F shower head B23011* 1F shower head B23251* 5F shower head For Hand shower * denotes: CH=CHROME PLATED BN=BRUSH NICKEL, GM=GUN METAL, G=GOLD, RG=ROSE GOLD For Shower head * denotes: CH=CHROME PLATED MB=MATT BLACK, W= WHITE, BN=BRUSH NICKEL, ORB=OIL RUBBED BRONZE， GM=GUN METAL, G=GOLD, RG=ROSE GOLD

Approval Holder:: Xiamen Jelong Plumbing Co.,Ltd

Company Name
Xiamen Jelong Plumbing Co.,Ltd
Address
Unit 402, No. 598 Guankou South Road Jimei District Xiamen
Country
China

View All Listings by this Company
Manufacturer:: Xiamen Jelong Plumbing Co.,Ltd

Company Name
Xiamen Jelong Plumbing Co.,Ltd
Address
Unit 402, No. 598 Guankou South Road Jimei District Xiamen
Country
China

View All Listings by this Company

WRAS Approval Number: #250612005

Range of shower handsets with plastic bodies and various finishes. Maximum operating temperature 60 °C. Open outlet use only.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 250612005
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M)
Marking:: Keekoe on body.
Installation Requirements:: R001 R040
Expiry date:: 30/06/2030
Model:: H01011, H01023, H02013, H03013, H03021, H04011, H04023, H05014, H05015, H06013, H09015, H11013, H12013, H17015, H20013, H21011, H27015, H28013, H29033, H30043, H31015, H33013, H34013, H34021, H35013, H36011, H34021, H34021, H43014, H46014, H39033, H37013, H39031, H39013, H39043, H49014, H48013, H48021, H46023, H55013, H56013, H41013 & H42013.

Approval Holder:: Xiamen Keekoe Sanitary Ware Co. Ltd.

Company Name
Xiamen Keekoe Sanitary Ware Co. Ltd.
Address
No.275-279 Huanzhu Road North Jimei Industrial Zone Xiamen
Country
China

View All Listings by this Company

WRAS Approval Number: #250608015

Range of overhead shower outlets with stainless steel bodies (various finishes). The inlet incorporates a stainless-steel filter and a plastic flow regulator. Maximum working temperature 45°C. Open outlet use only.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 250608015
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (F).
Marking:: Dolphin Solutions Ltd logo on the body.
Installation Requirements:: R001 R040
Expiry date:: 30/06/2030
Model:: DB3001.a.bbb Dolphin blue round shower head DB3002.a.bbb Dolphin blue square shower head Where: The suffix .a in the above codes will be a number 1 - 9 to denote the finish: .1 to denote brushed/satin polished. .2 to denote mirror polished. .3 to denote brushed/satin polished with PVD coating. .4 to denote mirror polished with PVD coating. .5 to denote powder coated. .6 - 9 to denote other material and finish options. The suffix .bbb in the above code indicates the colour of the PVD or powder coat. It can be either two or three digits from 01-999.

Approval Holder:: Dolphin Solutions Limited

Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom
General Email
Ralph.Mumford@dolphinsolutions.com

View All Listings by this Company

WRAS Approval Number: #241202076

Range of In-line ‘Y’ patterned strainer with ductile iron bodies (blue epoxy powder coated) and stainless-steel screens. Maximum working pressure 16.0 bar. Maximum operating temperature 85ºC.

Section:: 1715 Strainers
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN40-DN300 Flanged.
Marking:: FGV and flow arrow on body. Size, PN and temperature on label plate.
Installation Requirements:: R001
Expiry date:: 31/12/2029
Model:: FGV Y STRAINER 7302

Approval Holder:: FGV International Ltd

Company Name
FGV International Ltd
Address
87, CALDERSTONE ROAD, BRAMTON ON
Country
Canada

View All Listings by this Company

WRAS Approval Number: #250602009

Range of in-line bronze bodied ‘Y’-pattern strainers with stainless steel mesh. Maximum working pressure 25.0 bar, Maximum operating temperature 85°C.

Section:: 1715 Strainers
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 17.06181.G15.CP5R-2030: ½” BSP (F)x(F) (DN15), 17.06181.G20.CP5R-2030: ¾” BSP (F)x(F) (DN20), 17.06181.G25.CP5R-2030: 1” BSP (F)x(F) (DN25), 17.06181.G32.CP5R-2030: 1¼” BSP (F)x(F) (DN32), 17.06181.G40.CP5R-2030: 1½” BSP (F)x(F) (DN40), 17.06181.G50.CP5R-2030: 2” BSP (F)x(F) (DN50).
Marking:: Zhejiang Valogin Technology Co., Ltd. trademark logo (‘V&G’), flow arrow, size and pressure on body.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: 17.06181.G15.CP5R-2030, 17.06181.G20.CP5R-2030, 17.06181.G25.CP5R-2030, 17.06181.G32.CP5R-2030, 17.06181.G40.CP5R-2030, 17.06181.G50.CP5R-2030.

Approval Holder:: Zhejiang Valogin Technology Co Ltd

Company Name
Zhejiang Valogin Technology Co Ltd
Address
Qinggang Technological Ind. Zone, Yuhuan, Taizhou Zhejiang
Country
China
Phone
+86 (0)574 8907 1560

View All Listings by this Company

WRAS Approval Number: #240402090

Range of ‘Y’-pattern strainers with blue epoxy coated ductile iron bodies and a stainless-steel screen. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1715 Strainers
Size:: DN50 - DN 300 flanged
Marking:: AEON logo DN, PN, year of manufacture and flow arrow on body.
Installation Requirements:: R001
Expiry date:: 30/04/2029
Model:: AW32 - Aeon Y-Strainers DN50 – DN300 Flanged

Approval Holder:: Radius Systems Limited

Company Name
Radius Systems Limited
Address
Radius House, Berristow Lane, South Normanton, Alfreton, Derbyshire
Postcode
DE55 2JJ
Country
United Kingdom
Phone
01773582303
General Email
richard.marks@radius-systems.com

View All Listings by this Company

WRAS Approval Number: #250515014

Range of wall mounted bib tap with chrome plated brass bodies, incorporating either non-rising spindle headworks with cross top operating members or quarter turn ceramic disc headworks with single lever operating members. Maximum working pressure 10.0 bar. Maximum operating pressure 85°C.

Section:: 1750 Taps
Section Subtitle:: Draw off bib tap(s)
WRAS Approval Number:: 250515014
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M).
Marking:: DTC59 on underside of body.
Installation Requirements:: R001 R040
Expiry date:: 31/05/2030
Model:: Non-rising spindle headworks: 095X SF2302CP Quarter turn ceramic disc headworks: DLT095 DLV095 SF2301CP

Approval Holder:: Methven UK Limited

Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

WRAS Approval Number: #2204370

Wall mounted hose union taps with brass bodies, incorporating a rising spindle headwork with a ‘T’ type operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1780 Taps
Section Subtitle:: Hose union tap(s).
WRAS Approval Number:: 2204370
Size:: SD-98303/BR 15mm Bib Tap Hose SD-98303/BR 20mm Bib Tap Hose
Marking:: Shield on body.
Installation Requirements:: R001 R040
Expiry date:: 30/04/2027
Model:: SD-98303/BR Bib Tap Hoses

Approval Holder:: SHIELD FIRE SAFETY & SECURITY LTD

Company Name
SHIELD FIRE SAFETY & SECURITY LTD
Address
Unit 3, Endeavour Drive Basildon- Essex
Postcode
SS14 3WF
Country
United Kingdom
Phone
+44 (0) 1708 377731
General Email
info@shieldglobal.com

View All Listings by this Company

WRAS Approval Number: #2301375

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2301375
Size:: DN8 with end connections: M10, M12, F3/8”, F1/2”, 14.7mm & 15mm. DN10 with end connections: M10, M12, F3/8”, F1/2”, F3/4”, 14.7mm, 15mm & 22mm. DN13 with end connections: F1/2”, F3/4”, 14.7mm, 15mm & 22mm.
Marking:: Aqua Pro, WRAS & year of manufacture YYYY on ferrule
Installation Requirements:: R001
Expiry date:: 31/01/2028
Model:: APSS5360 SS FLEXIBLE PIPE 1/2" X 1/2" X 60CM APSS5345 SS FLEXIBLE PIPE 1/2" X 1/2" X 45CM APSS5330 SS FLEXIBLE PIPE 1/2" X 1/2" X 30CM APSS5390 SS FLEXIBLE PIPE 1/2" X 1/2" X 90CM APSS3860 SS FLEXIBLE PIPE 3/8" X 3/8" X 60CM APSS3845 SS FLEXIBLE PIPE 3/8" X 3/8" X 45CM APSS3830 SS FLEXIBLE PIPE 3/8" X 3/8" X 30CM APSS123860 SS FLEXIBLE PIPE 1/2" X 3/8" X 60CM APSS123845 SS FLEXIBLE PIPE 1/2" X 3/8" X 45CM

Approval Holder:: Ultimate Trading Co(L.L.C.)

Company Name
Ultimate Trading Co(L.L.C.)
Address
No 2 Street 13D Nakheei Road, Deira Dubai
Country
U.A.E

View All Listings by this Company

WRAS Approval Number: #250602048

Range of stainless steel braided EPDM lined flexible hose assemblies with EPDM seals & EPDM washers, available with a variety of end connections. For use with copper pipe manufactured to EN1057 & HEP20 PB pipe. Maximum working pressure; 6 Bar Maximum operating temperature; 65°c

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 250602048
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models below. PF = Pushfit
Marking:: On cap: Wavin, Hep20. Collor: BS7291, Size, and KEYLESS. On ferule: DOM (YYYY) GCE and WRAS
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: 3093476 KL425A-15 15mm PF X ½ BSP (F) 3093488 KL125A-15 15mm PF X ½ BSP (F) 3093567 KL125B-15 15mm PF X 3/4 BSP (F) 3093484 KL125C-22 22mm PF X ¾ BSP (F) 3093477 KL125B-22 22mm PF X ¾ BSP (F) 3093487 KL225A-15 15mm PF X ½ BSP (F) 3093478 KL225B-15 15mm PF X 3/4 BSP (F) 3093515 KL225C-22 22mm PF X ¾ BSP (F) 3093512 KL225B-22 22mm PF X ¾ BSP (F) 3093493 KL325A-15 15mm PF X ½ BSP (F) 3093583 KL325B-22 22mm PF X ¾ BSP (F) 3093586 KL125H-15 15mm PF 3093579 KL125H-22 22mm PF 3093601 KL225H-15 15mm PF 3093518 KL225H-22 22mm PF 3093593 KL125D-15 15mm PF X ½ BSP (F) 3093501 KL125F-15 15mm PF M10 threaded 3093496 KL125G-15 15mm PF M12 threaded

Manufacturer:: Wavin Ltd.

Company Name
Wavin Ltd.
Address
Edlington Lane, Edlington Doncaster
Postcode
DN12 1BY
Country
United Kingdom
Phone
01709 856300

View All Listings by this Company

WRAS Approval Number: #250603301

Section:: 2010 Shower Valves
Description:: A Range of Shower valve(s) with thermostatic temperature control
Wall Mounted Concealed. Inlets incorporate approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R020
Expiry date:: 30/06/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
PM2 SHCDIV C	CHROME	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
313963	BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
309644	BRUSH BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
AR3 SHCDIV C	CHROME	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
COB SHCDIV C	CHROME	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
COB SHCDIV BLK	BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
RP3 COB SHCDIV C	CHROME	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
313960	BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
CRU SHCDIV C	CHROME	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
CRU SHCDIV BB	BRUSH BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
CRU SHCDIV BLK	BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
DEL SHCDIV BLK	BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
286569	BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
285401	CHROME	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
286565	BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
286566	GUN METAL	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
286567	BRUSH BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
HOU SHCDIV C	CHROME	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
HOU SHCDIV BLK	BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
HOU SHCDIV BB	BRUSH BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
285400	CHROME	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
313962	BRUSH BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
313965	BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
MOL SHCDIV C	CHROME	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
MOL SHCDIV BB	BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
MOL SHCDIV BLK	BRUSH BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
311671	CHROME	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
311672	BRUSH BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
311673	BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
PM2 SHCDIV BLK	BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
PM2 SHCDIV BB	BRUSH BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
RP3 PM2 SHCDIV C	CHROME	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
231844	CHROME	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
313961	BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
SAI SHCDIV C	CHROME	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
SAI SHCDIV BLK	BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
SAI SHCDIV GM	GUN METAL	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
SAI SHCDIV BB	BRUSH BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
SAF SHCVO C	CHROME	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
SAF SHCDIV C	CHROME	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
SAF SHCDIV BLK	BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
SAF SHCDIV BB	BRUSH BLACK	15mm Compression	5.0 bar	85 °C	Bristan	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable

Notes & Further Information

Product Images

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

WRAS Approval Number: #250602043

Shower set comprising of a wall mounted shower valve, riser rail, shower handset, shower hose and overhead shower outlet. Flow in controlled by a ceramic disc headwork with dome type operating member. Temperature is controlled via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Each inlet of the shower valve incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 250602043
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M)
Marking:: Ideal Standard on body
Installation Requirements:: R001 R010 R040
Expiry date:: 30/06/2030
Model:: A7880AA CERATHERM SOLOS SHR SYS TH 1F 300MM CHR A7881AA CT SOLOS SHR SYS TH 1F 330MM LIGHT CHR A7882AA CERATHERM SOLOS SHR SYS TH 3F 300MM CHR A7884AA CT SOLOS SHR SYS TH 3F 300MM STICK CHR A7882GN CERATHERM SOLOS SHR SYS TH 3F 300MM SLST A7882A2 CERATHERM SOLOS SHR SYS TH 3F 300MM BRGO A7882A5 CERATHERM SOLOS SHR SYS TH 3F 300 MGNGR A7882XG CERATHERM SOLOS SHR SYS TH 3F 300MM SBLK A7883AA CT SOLOS SHR SYS TH 3F 330MM LIGHT CHR A7883GN CT SOLOS SHR SYS TH 3F 330MM LIGHT SLST A7883A2 CT SOLOS SHR SYS TH 3F 330MM LIGHT BRGO A7883A5 CT SOLOS SHR SYS TH 3F 330MM LIGHT MGNGR A7883XG CT SOLOS SHR SYS TH 3F 330MM LIGHT SBLK

Approval Holder:: Ideal Standard International NV

Company Name
Ideal Standard International NV
Address
Corporate Village – Gent Building Da Vincilaan 2 B-1935 Zaventem

View All Listings by this Company

WRAS Approval Number: #250608022

Range of thermostatic mixing valves in various finishes, model XX3001YY has one outlet, temperature is controlled independently by a thermostatic cartridge and the flow controlled via a ceramic disc valve, model XX3002YY has 2 outlets temperature is controlled independently by a thermostatic cartridge and the flow controlled via a ceramic disc cartridge and model XX3003YY has 3 outlets temperature is controlled independently by a thermostatic cartridge and the flow controlled via a ceramic disc cartridge. Inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60⁰C.

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 250608022
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: These products are not supplied with shower hoses or handsets.
Size:: ¾” BSP (F).
Marking:: Coalbrook on shroud body.
Installation Requirements:: R001 R010 R040
Expiry date:: 30/06/2030
Model:: XX 3001 YY, XX 3002 YY and XX 3003 YY: XX denotes the trim and can be replaced with BA – Bank, DO – Domo and DC Decca. The numbers will remain constant. YY denotes the finish BN – Brushed Nickel, CP - Chrome, GM – Gunmetal and BB – Brushed Brass.

Approval Holder:: Davroc Limited

Company Name
Davroc Limited
Postcode
EN11 0QS
Country
United Kingdom
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

WRAS Approval Number: #250602711

Range of spring loaded, resilient trim, non-return valves with, stainless steel bodies and plunger with EPDM seals. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 2185 Valves
Section Subtitle:: Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should not be made to `Backflow Prevention Devices`.
WRAS Approval Number:: 250602711
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¼” - 4” BSP (F)
Marking:: Mondeo, flow arrow, size, pressure and date of manufacture (DD/MM/YY) on body
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Small DW 900103A 900106A 900110A 900112A 900117A 900120A Idrja DW 900010A 900400A 900015A 900410A 900020A 900420A 900025A 900430A 900028A 900440A 900056A 900451A 900461A 900471A Idrja DW MFA 900017MFA 900022MFA 900027MFA 900030MFA 900017FMA 900022FMA

Manufacturer:: Mondeo Srl.

Company Name
Mondeo Srl.
Address
STRADA DEL CAPITELLO SN MONTECCHIO MAGGIORE
Country
Italy

View All Listings by this Company

WRAS Approval Number: #251008701

Range of pre-set pressure relief valves with brass or DZR brass bodies and EPDM diaphragms. The valves are fitted with hand operated easing gear. Pre-set pressure 3.0 bar for all models. Maximum operating temperature 85°C.

Section:: 2210 Valves
Section Subtitle:: Pressure relief.
WRAS Approval Number:: 251008701
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: Caleffi logo, flow arrow, PN and size on the body. CR on DZR brass version.
Installation Requirements:: R001 R200
Expiry date:: 31/10/2030
Proviso:: For closed circuit use only.
Model:: A312012 CST 19.9 mm manifold fast fit x ½” BSP (F), A312400 CST 17.6 mm manifold fast fit x ½ BSP (F), A312401 CST 19.9 mm manifold fast fit x ½” BSP (F), A312413 WSC 19.8 mm manifold fast fit x ½” BSP (F), A312414 CST 19.9 mm manifold fast fit x ½ BSP (M), A312420 CST 22 mm manifold fast fit, A312420 OEM 22 mm manifold fast fit x ½” BSP (F), A312430 CST ½” BSP (M) x ½” BSP (M), A312438 CST 19.9 mm manifold fast fit x ½” BSP (M), A312439 CST 19.9 mm manifold fast fit x ½” BSP (F) (DZR), A314402 BSC ½” BSP (M) x ½” BSP (F), A314437 CST ½” BSP (M) x 15mm compression, A313001 FRQ 17 mm manifold fast fit, A314432 CST ½” BSP (M) x ½” BSP (F).

Approval Holder:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

WRAS Approval Number: #250515003

Range of spherical valves with nickel plated brass bodies, nickel plated brass ball and PTFE seats. The LD 47.300.XX and LD 47.302.XX models have a butterfly handle. The LD 47.301.XX and LD 47.303.XX models have a lever operating member (normal and special type). The LD 47.340.XX and LD 47.342.XX models have a T-handle. Maximum working pressures: ½” - 1” sizes: 40.0 bar, 1¼” - 2” sizes: 25.0 bar. Maximum operating temperature 100°C.

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 250515003
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: Manufacturer’s logo (‘LD’), PRIDE, PN, DN, size, production date (can be either MM.YY or YY within a circle and a dot around the circle to denote the month, e.g. 4 dots = April) on body.
Installation Requirements:: R001
Expiry date:: 31/05/2030
Model:: BSP (F) x BSP (F) models: LD 47.300.XX (½” - 1¼”). LD 47.301.XX (½” - 2”). LD 47.340.XX (½” - ¾”). BSP (F) x BSP (M) models: LD 47.302.XX (½” - 1¼”). LD 47.303.XX (½” - 2”). LD 47.342.XX (½” - ¾”). BSP (F) x captive nut models: LD 47.347.XX (½” - ¾”). Where XX represents sizes: 15 = ½”, 20 = ¾”, 25 = 1”, 32 = 1¼”, 40 = 1½”, 50 = 2”.

Product Images

Approval Holder:: LLP TORGOVIY DOM LD

Company Name
LLP TORGOVIY DOM LD
Address
Republic of Kazakhstan, 010000, Astana, Baikonyr district, 9, Zhanazhol str.

View All Listings by this Company
Manufacturer:: LLC LD PRIDE

Company Name
LLC LD PRIDE
Address
Russian Federation, Chelyabinsk region, 454010, Chelyabinsk City, Yeniseiskaya street, building 56, building 1

View All Listings by this Company

WRAS Approval Number: #250402052

Range of spherical valves with either DZR brass Nickel-plated brass or chromium plated brass bodies, nickel plated brass ball and PTFE seats. With either lever or butterfly operating members. Some models incorporate a stainless-steel filter. Compression models for use with copper pipe manufactured to EN 1057. Maximum working pressure: 10 Bar. Maximum operating temperature: 85°C.

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 250402052
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: SEE MODEL
Marking:: Airaga logo and product info on body. Altecnic on levers.
Installation Requirements:: R001
Expiry date:: 30/04/2030
Model:: AI-373115 (15mm – BLUE B/FLY HANDLE BALL VALVE), AI-373B15 (15mm – BLUE LEVER HANDLE BALL VALVE), AI-373R15 (15mm – RED LEVER HANDLE BALL VALVE), AI-373RB5 (15mm – RED B/FLY HANDLE BALL VALVE), AI-383B15 (15mm – BLUE LEVER HANDLE DZR INTABALL VALVE), AI-383115 (15mm – BLUE B/FLY HANDLE DZR INTABALL VALVE), AI-383R15 (15mm – RED LEVER HANDLE DZR INTABALL VALVE), AI-383RB5 (15mm – RED B/FLY HANDLE DZR INTABALL VALVE), AI-373RB5E (15mm – RED B/FLY HANDLE BALL VALVE EXT STEM), AI-373115E (15mm – BLUE B/FLY HANDLE BALL VALVE EXT STEM), AI-373R15E (15mm – RED LEVER HANDLE BALL VALVE EXT STEM), AI-373B15E (15mm – BLUE LEVER HANDLE BALL VALVE EXT STEM), AI-383R15E (15mm – RED LEVER DZR BALL VALVE EXT STEM), AI-383B15E (15mm – BLUE LEVER DZR BALL VALVE EXT STEM), AI-383RB5E (15mm – BLUE B/FLY HANDLE DZR BALL VALVE EXT STEM), AI-383115E (15mm – BLUE LEVER DZR BALL VALVE EXT STEM), AI-383R15L (15mm – RED LEVER DZR BALL VALVE LOCKABLE), AI-383B15L (15mm – BLUE LEVER DZR BALL VALVE LOCKABLE), AI-373B15L (15mm – BLUE LEVER HANDLE BALL VALVE LOCKABLE), AI-373R15L (15mm – RED LEVER HANDLE BALL VALVE LOCKABLE), AI-373222 (22mm – BLUE B/FLY HANDLE BALL VALVE), AI-373228 (28mm – BLUE B/FLY HANDLE BALL VALVE), AI-373B22 (22mm – BLUE LEVER HANDLE BALL VALVE), AI-373B28 (28mm – BLUE LEVER HANDLE BALL VALVE), AI-373R22 (22mm – RED LEVER HANDLE BALL VALVE), AI-373R28 (28mm – RED LEVER HANDLE BALL VALVE), AI-373RB2 (22mm – RED B/FLY HANDLE BALL VALVE), AI-373RB8 (28mm – RED B/FLY HANDLE BALL VALVE), AI-373R35 (35mm – RED LEVER HANDLE BALL VALVE), AI-373B35 (35mm – BLUE LEVER HANDLE BALL VALVE), AI-373R42 (42mm – RED LEVER HANDLE BALL VALVE), AI-373B42 (42mm – BLUE LEVER HANDLE BALL VALVE), AI-373R54 (54mm – RED LEVER HANDLE BALL VALVE), AI-373B54 (54mm – BLUE LEVER HANDLE BALL VALVE), 124-1045 CST (28mm x 1” BSP (M) – RED B/FLY HANDLE BALL VALVE), 124-1046 CST (28mm x 1” BSP (M) – BLUE B/FLY HANDLE BALL VALVE), 124-6111 CST (22mm – FILTER BALL VALVE NO MAGNET (BFLY)), 124-6101 CST (22mm – FILTER BALL VALVE MAGNET (BFLY)), 124-6112 CST (28mm – FILTER BALL VALVE NO MAGNET (BFLY)), 124-6102 CST (28mm – FILTER BALL VALVE MAGNET (BFLY)), 124-6131 CST (1M x 1” BSP (F) – FILTER BV NO MAGNET (BFLY) EXT STEM), 124-6122 CST (28mm x 1” BSP (F) – FILTER BV NO MAGNET (BFLY) EXT STEM),
AI-383B22 (22mm – BLUE LEVER HANDLE DZR INTABALL VALVE), AI-383B28 (28mm – BLUE LEVER HANDLE DZR INTABALL VALVE), AI-383222 (22mm – BLUE B/FLY HANDLE DZR INTABALL VALVE), AI-383228 (28mm – BLUE B/FLY HANDLE DZR INTABALL VALVE), AI-383R22 (22mm – RED LEVER HANDLE DZR INTABALL VALVE), AI-383R28 (28mm – RED LEVER HANDLE DZR INTABALL VALVE), AI-383RB2 (22mm – RED B/FLY HANDLE DZR INTABALL VALVE), AI-383RB8 (28mm – RED B/FLY HANDLE DZR INTABALL VALVE), AI-373RB2E (22mm – RED B/FLY HANDLE BALL VALVE EXT STEM), AI-373RB8E (28mm – RED B/FLY HANDLE BALL VALVE EXT STEM), AI-373222E (22mm – BLUE B/FLY HANDLE BALL VALVE EXT STEM), AI-373228E (28mm – BLUE B/FLY HANDLE BALL VALVE EXT STEM), AI-373R22E (22mm – RED LEVER HANDLE BALL VALVE EXT STEM), AI-373R28E (28mm – RED LEVER HANDLE BALL VALVE EXT STEM), AI-373B22E (22mm – BLUE LEVER HANDLE BALL VALVE EXT STEM), AI-373B28E (28mm – BLUE LEVER HANDLE BALL VALVE EXT STEM), AI-373R35E (35mm – RED LEVER HANDLE BALL VALVE EXT STEM), AI-373R42E (42mm – RED LEVER HANDLE BALL VALVE EXT STEM), AI-373R54E (54mm – RED LEVER HANDLE BALL VALVE EXT STEM), AI-373B35E (35mm – BLUE LEVER HANDLE BALL VALVE EXT STEM), AI-373B42E (42mm – BLUE LEVER HANDLE BALL VALVE EXT STEM), AI-373B54E (54mm – BLUE LEVER HANDLE BALL VALVE EXT STEM), AI-383R22E (22mm – RED LEVER DZR BALL VALVE EXT STEM), AI-383R28E (28mm – RED LEVER DZR BALL VALVE EXT STEM), AI-383B22E (22mm – BLUE LEVER DZR BALL VALVE EXT STEM), AI-383B28E (28mm – BLUE LEVER DZR BALL VALVE EXT STEM), AI-383RB2E (22mm – BLUE B/FLY HANDLE DZR BALL VALVE EXT STEM), AI-383RB8E (28mm – BLUE B/FLY HANDLE DZR BALL VALVE EXT STEM), AI-383222E (22mm – BLUE LEVER DZR BALL VALVE EXT STEM), AI-383228E (28mm – BLUE LEVER DZR BALL VALVE EXT STEM), AI-383R22L (22mm – RED LEVER DZR BALL VALVE LOCKABLE), AI-383R28L (28mm – RED LEVER DZR BALL VALVE LOCKABLE), AI-383B22L (22mm – BLUE LEVER DZR BALL VALVE LOCKABLE), AI-383B28L (28mm – BLUE LEVER DZR BALL VALVE LOCKABLE), AI-373B22L (22mm – BLUE LEVER HANDLE BALL VALVE LOCKABLE), AI-373B28L (28mm – BLUE LEVER HANDLE BALL VALVE LOCKABLE), AI-373R22L (22mm – RED LEVER HANDLE BALL VALVE LOCKABLE), AI-373R28L (28mm – RED LEVER HANDLE BALL VALVE LOCKABLE), AI-37304VBAG (15mm x 1/2" BSP (M) – GREEN LEVER HANDLE BALL VALVE), AI-37315VBAG (15mm – GREEN LEVER HANDLE BALL VALVE), AI-383A2222M07 (22mm x 22mm – PLAIN TAIL BLACK B/FLY VALVE), AI-373150503I (15mm x 3/4" BSP (M)- BLUE B/FLY HANDLE BALL VALVE), AI-04620041507 (3/4" BSP (F) x 3/4" BSP (F) – BALL VALVE C/W BLACK HANDLE), AI-04620052207 (22mm x 3/4" BSP (F) – SWIVEL BALL VALVE C/W BLACK HANDLE), AI-04620062207 (22mm x 1" BSP (F) – SWIVEL BALL VALVE C/W BLACK HANDLE), AI-04620062807 (28mm x 1" BSP (F) – SWIVEL BALL VALVE C/W BLACK HANDLE), AI-046200507 (15mm x 1/2" BSP (F) – SWIVEL BALL VALVE C/W BLACK HANDLE).

Approval Holder:: Altecnic Limited

Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company
Manufacturer:: Airaga Rubinetterie Spa

Company Name
Airaga Rubinetterie Spa
Address
Via Per Briga 42 28024 Gozzano Novara
Country
Italy
General Email

View All Listings by this Company

WRAS Approval Number: #250302055

Range of in-line full bore spherical valves with nickel plated brass bodies, chrome plated brass ball and either lever or ‘T’ handles (see model). The products are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressures: 30.0 bar (15mm-28mm) or 25.0 bar (35mm-54mm). Maximum operating temperature 99°C.

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 250302055
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: K6558 from 15mm to 54mm A numerical digit is added to the end of the model to indicate size; 3 = 15mm. 4 = 22mm. 5 = 28mm. 6 = 35mm. 7 = 42mm. 8 = 54mm. K6563 from 15mm to 54mm A numerical digit is added to the end of the model to indicate size; 1 = 15mm. 2 = 22mm. 3 = 28mm. 4 = 35mm. 5 = 42mm. 6 = 54mm. 32788 & K6554 from 15mm to 28mm A numerical digit is added to the end of the model to indicate size; 3 = 15mm. 4 = 22mm. 5 = 28mm.
Size:: K6558 - 15mm to 54mm. K6563 - 15mm to 54mm. 32788 - 15mm to 28mm. K6554 - 15mm to 28mm.
Marking:: Rubinetterie Bresciane Bonomi S.p.A. logo (‘RB’), size, & pressure on body.
Installation Requirements:: R001
Expiry date:: 31/03/2030
Model:: K6558 * JET BBV24 LEVER OP CXC BALL VALVE K6563 * JET BBV24R RED LEVER XCXBALL VALVE 32788 * CENTER WRAS LVR BRASS BALL VALVE K6554 * JET BBV25NP T HANDLE CXC BALL VALVE .

Approval Holder:: Wolseley UK Ltd.

Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company
Manufacturer:: Rubinetterie Bresciane Bonomi S.p.A

Company Name
Rubinetterie Bresciane Bonomi S.p.A
Address
Via Massimo Bonomi, 1 Gussago (BS)
Postcode
25064
Country
Italy
Phone
+39 030 82 50 212
General Email

View All Listings by this Company

WRAS Approval Number: #250515015

Range of spherical valves with brass or DZR brass bodies, chromium plated brass or chromium plated DZR brass (12-18mm) or stainless-steel balls (22-54mm) and various operating members The press-fit connection is for use with copper pipes (manufactured to EN 1057), stainless steel pipes (manufactured to EN10312) or carbon steel pipes (manufactured to EN10305-3). Jointing is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 250515015
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 12-54mm press-fit.
Marking:: Pressure, Size & CR on body. Crane logo, Pressure Model and product info on lever or lockshield cap.
Installation Requirements:: R001
Expiry date:: 31/05/2030
Model:: Crane D172A.PF - Lever handle. Crane D172AEXS.PF – Lever handle with extension stem. Crane D172ALS.PF- Lockshield handle. Crane D172AT.PF – T- handle

Approval Holder:: Crane Ltd

Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Country
United Kingdom
Phone
01473 277 364
General Email
tturner@cranebsu.com

View All Listings by this Company

WRAS Approval Number: #250515016

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 250515016
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:
Size:: 12-54mm press-fit.
Marking:: Pressure, Size & CR on body. Hattersley or Hattersley logo, Pressure, Model and product details on lever on lockshield cover.
Installation Requirements:: R001
Expiry date:: 31/05/2030
Model:: Hattersley Fig 114.PF - lever handle Hattersley Fig 114EXT.PF - lever handle with extension stem. Hattersley Fig 114LS.PF - lockshield handle. Hattersley Fig114T.PF - T-handle.

Approval Holder:: Hattersley

Company Name
Hattersley
Address
11-15 Epsilon Terrace West Road Ipswich Suffolk
Postcode
IP3 9FJ
Country
United Kingdom
Phone
0766465023
General Email
tturner@cranebsu.com

View All Listings by this Company

WRAS Approval Number: #250515017

Range of spherical valves with brass or chromium plated brass and various operating members The press-fit connection is for use with copper pipes (manufactured to EN 1057), stainless steel pipes (manufactured to EN10312) or carbon steel pipes (manufactured to EN10305-3). Jointing is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 250515017
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: BVPS 12mm Pressfit ball valve with Lever handle BVPS 15mm Pressfit ball valve with Lever handle BVPS 18mm Pressfit ball valve with Lever handle BVPS 22mm Pressfit ball valve with Lever handle BVPS 28mm Pressfit ball valve with Lever handle BVPS 35mm Pressfit ball valve with Lever handle BVPS 42mm Pressfit ball valve with Lever handle BVPS 54mm Pressfit ball valve with Lever handle BVPSL 12mm Pressfit ball valve with lockable Lever handle BVPSL 15mm Pressfit ball valve with lockable Lever handle BVPSL 18mm Pressfit ball valve with lockable Lever handle BVPSL 22mm Pressfit ball valve with lockable Lever handle BVPSL 28mm Pressfit ball valve with lockable Lever handle BVPSL 35mm Pressfit ball valve with lockable Lever handle BVPSL 42mm Pressfit ball valve with lockable Lever handle BVPSL 54mm Pressfit ball valve with lockable Lever handle BVPSE 12mm Pressfit ball valve with extension Lever handle BVPSE 15mm Pressfit ball valve with extension Lever handle BVPSE 18mm Pressfit ball valve with extension Lever handle BVPSE 22mm Pressfit ball valve with extension Lever handle BVPSE 28mm Pressfit ball valve with extension Lever handle BVPSE 35mm Pressfit ball valve with extension Lever handle BVPSE 42mm Pressfit ball valve with extension Lever handle BVPSE 54mm Pressfit ball valve with extension Lever handle BVPST 12mm Pressfit ball valve with butterfly handle BVPST 15mm Pressfit ball valve with butterfly handle BVPST 18mm Pressfit ball valves with butterfly handle BVPST 22mm Pressfit ball valves with butterfly handle BVPST 28mm Pressfit ball valve with butterfly handle
Marking:: Valtech PN, size, batch date (WWYY) on body. NL on body.
Installation Requirements:: R001
Expiry date:: 31/05/2030
Model:: BVPS, BVPSL, BVPSE & BVPST Spherical Valves.

Approval Holder:: Ningbo Valtech Flow Control Co.LTD

Company Name
Ningbo Valtech Flow Control Co.LTD
Address
Room 9015 Ningbo Branch of Zhejiang University Science and Technology Park High Tech Zone Ningbo
Country
China

View All Listings by this Company

WRAS Approval Number: #250608012

Range of non-rising spindle gate valves with DZR brass bodies. Operating members are either handwheel operated or lockshield. Maximum working pressure: 20.0 bar. Maximum operating temperature: 100°C.

Section:: 2290 Valves
Section Subtitle:: Stop, gate, metal.
WRAS Approval Number:: 250608012
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½" - 2" BSP (F), ½" - 2" NPT (F), ½" - 2" BSPT (F).
Marking:: Hattersley logo HNH, CR, size & pressure on body.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Fig 30VLS (lockshield operated), Fig 30V (handwheel operated).

Approval Holder:: Hattersley

Company Name
Hattersley
Address
11-15 Epsilon Terrace West Road Ipswich Suffolk
Postcode
IP3 9FJ
Country
United Kingdom
Phone
0766465023
General Email
tturner@cranebsu.com

View All Listings by this Company

WRAS Approval Number: #250602037

Range of gate valves with ductile iron bodies (blue epoxy powder coated) incorporating EPDM encapsulated Wedge and bonnet with EPDM `O` rings and gaskets. Valves incorporate handwheel type operating member. Maximum working pressure 16.0 Bar. Maximum operating temperature 60.0°C

Section:: 2290 Valves
Section Subtitle:: Stop, gate, metal.
WRAS Approval Number:: 250602037
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model below
Marking:: R&D Multiples (METAL CAST) PVT LTD, Size, Pressure and serial number on data plate. R&D and PN16 cast on body
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: GLV03: 50mm Flanged 80mm Flanged 100mm Flanged 150mm Flanged 200mm Flanged 250mm Flanged 300mm Flanged 350mm Flanged 400mm Flanged 450mm Flanged 500mm Flanged 600mm Flanged

Manufacturer:: R&D Multiples (Metal Cast) Pvt Ltd

Company Name
R&D Multiples (Metal Cast) Pvt Ltd
Address
Survey No 304 Village Balda Pardi 396 125 District India

View All Listings by this Company

WRAS Approval Number: #250615005

Range of gate valves with brass bodies, non-rising spindles and hand wheel operating members. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:: 2290 Valves
Section Subtitle:: Stop, gate, metal.
WRAS Approval Number:: 250615005
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Marking:: Zhejiang Valogin Technology Co., Ltd. trademark logo (‘V&G’), size and PN on body. Zhejiang Valogin Technology Co., Ltd. trademark logo (‘V&G’) and WRAS on operating member (disc).
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: 11.06271.G15.CP5R-2030: ½” BSP (F)x(F), 11.06271.G20.CP5R-2030: ¾” BSP (F)x(F), 11.06271.G25.CP5R-2030: 1” BSP (F)x(F), 11.06271.G32.CP5R-2030: 1¼” BSP (F)x(F), 11.06271.G40.CP5R-2030: 1½” BSP (F)x(F), 11.06271.G50.CP5R-2030: 2” BSP (F)x(F), 11.06281.G15.CP5R-2030: ½” BSP (F)x(F), 11.06281.G20.CP5R-2030: ¾” BSP (F)x(F), 11.06281.G25.CP5R-2030: 1” BSP (F)x(F), 11.06281.G32.CP5R-2030: 1¼” BSP (F)x(F), 11.06281.G40.CP5R-2030: 1½” BSP (F)x(F), 11.06281.G50.CP5R-2030: 2” BSP (F)x(F).

Product Images

Approval Holder:: Zhejiang Valogin Technology Co., Ltd.

Company Name
Zhejiang Valogin Technology Co., Ltd.
Address
Qinggang Technological Industrial Zone Yuhuan, Zhejiang
Country
China

View All Listings by this Company
Manufacturer:: Zhejiang Valogin Technology Co., Ltd.

Company Name
Zhejiang Valogin Technology Co., Ltd.
Address
Qinggang Technological Industrial Zone Yuhuan, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2303402

Range of commercial dish washing machines with flow controlled by a solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 4.0 bar. Cold water use only.

Section:: 2390 Washing Machines
Section Subtitle:: Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:: 2303402
Size:: ¾” BSP(F) captive nut
Marking:: 'FAGOR' Professional & logo & address. Model, date, & technical data on label plate
Installation Requirements:: R001 R574
Expiry date:: 31/03/2028
Model:: WLP-62, WLP-63, WLP-70 & WLP-130

Approval Holder:: Onnera Group S. Coop

Company Name
Onnera Group S. Coop
Address
Santxo Lopegeti Auzoa 22 20560 Onati-Gipuzkoa
Country
Spain

View All Listings by this Company

WRAS Approval Number: #250402712

Range of commercial dish washing machines. Flow is controlled by a solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure: 4.0 Bar. Maximum operating temperature: 60°C.

Section:: 2390 Washing Machines
Section Subtitle:: Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:: 250402712
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: PVC bodied appliance hose with an EPDM inner liner incorporating a ¾” BSP (F) captive nut end connection.
Marking:: DC Products logo on control panel. DC Products logo, model name and other technical information on adhesive label on side of body.
Installation Requirements:: R001
Expiry date:: 30/04/2030
Model:: ED50A, ED900A, SD40A, SXD40A, SD45A, SD50A, SXD45A, SXD50A, PG/PD40A, PG/PD45A, PG/PD50A, OG/OD40A, OG/OD50A, X600A, X700A, W700A, W1100, W1400A, W1400SA, SD900A, SD1000A, SD1300A, SD1350A, PD1000A, PD1300A, PD1350A, OD1400A, OD1425A, OD1450A, DC57-42A, DC57-62A, DC67A, DC109A. Key: SD = Standard series dish, SXD = Standard extra dish, ED = ECONOMY SERIES DISH, PG/PD = Premium series glass/Premium range dish, OG/OD = Optima series glass/dish W or X = washrite range. DC = Direct Catering Range (the numbers for the DC range also represent basket size). The number 40, 45 and 50 numbers relate to the basket size. The numbers 600, 700, 900, 1000, 1100, 1350, 1400 are arbitrary number or once related to the pump sizes. Any model that has the letter ‘A’ immediately after the model number signifies that the break tank has been fitted. Additional suffixes of varying character may be present after the letter ‘A’, e.g. ‘PD50A D’ List of available suffixes: BPI – boost pump CP – chemical pumps D – Drain pump DL – lock DP – detergent pump DR – Dryer HR – recovery IS – Softener LT – Light RDP – rinse and detergent pumps RP – rinse pump SW – Saniwash TD – thermos Disinfection UV – UV light. All the above models have the same pathway.

Approval Holder:: DC Products Ltd

Company Name
DC Products Ltd
Address
Unit 25 lodge hill Industrial Park Westbury Sub Mendip Somerset
Postcode
BA5 1EY

View All Listings by this Company

WRAS Approval Number: #250455050

'Powercron® 6070 B coating'. Factory applied, black coloured resin based coating. Apply as per manufacturer's TDS 'CR607B/CP588B'. Cure for 30 minutes@180°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 250455050
Expiry date:: 30/04/2030

Approval Holder:: PPG Industries France

Company Name
PPG Industries France
Address
3, Z.A.E Les Dix Muids BP 89, 59583 Marly Cedex
Country
France
Phone
+333 27149700

View All Listings by this Company