Range of single hole, single outlet, swivel, combination tap assemblies (brass bodies - various finishes). Incorporating a ceramic cartridge headwork with various operating members. The spout outlet incorporates a plastic aerator. Model BLS4ZZX is supplied with a pop-up waste – not verified by test. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250902012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided (TPSiV) lined flexible hose assemblies incorporating 3/8" BSP female adapters.

Marking:

WATERWORKS on escutcheon.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Model:

BKM4ZZX BLS4ZZX Followed by the legend of the type of lever/handle and surface finish. Suffix options: ZZ = represents handle components 0 Less Handles 1 Cross Handle 2 Two‐Tone Cross Handle 3 Coin Edge Cross Handle 10 Solo Series Lever Handle 11 Lever Handle 12 Two‐Tone Lever Handle 13 Coin Edge Lever Handle 14 Walnut Lever Handle 15 Leather Lever Handle 20 Solo Series Straight Lever Handle 2A Tandem Series Guilloche Lines Lever Handle 2B Tandem Series Two‐Tone Lever Handle 2C Union Series Guilloche Link Lever Handle 2D Union Series Enamel Guilloche Lines Lever Handle 2E Union Series Guilloche Pinstripe Lever Handle 2P Solo Series Two‐Piece Straight Lever Handle 2S Bond Rally Series Lever Handle 2T Teak Lever Handle 30 Solo Series Knob Handle 3S Bond Rally Series Knob Handle 4A Tandem Series Guilloche Lines Knob Handle 4B Tandem Series Two‐Tone Guilloche Knob Handle 4D Union Series Enamel Guilloche Lines Knob Handle 5C Union Series Guilloche Link Knob Handle 7A Tandem Series Guiloche Lines Lever handles with Gland Cover 7B Tandem Series Two Tone Lever handles with Gland Cover 7C Union Series Guiloche Link Lever handles with Gland Cover 7D Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P Solo Series Two Piece Straight Lever handle with Gland Cover 7S Bond Rally Series Lever Handle with Gland Cover 7T Tandem Series Teak lever with Gland Cover 8Z Straight Lever Handle 90 Solo Series Straight Lever handles with Gland Cover X = represents External Color or Finish Options AC Antique Copper AB Architectural Bronze AQB Antique Brass BZ Architectural Bronze C Polished Chrome CO Concordia DN Dark Nickel G Gold L Lumin M Matte Nickel MC Matte Chrome MG Matte Gold MS Matte Silver N Polished Nickel S Silver SC Shiny Copper SO Sovereign UB Unlacquered Brass

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London WC1N2EB

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes). Incorporating quarter turn ceramic disc or ceramic cartridge headworks and single lever or cross top operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 Bar Maximum operating temperature 70.0°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250902035

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hoses incorporating 1/2" BSP (F) captive nut end connections.

Marking:

ST JAMES logo on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Model:

5004 Range (2 Different colour finish) 5004BF 5004CM 5005 Range (5 Different colour finish) 5005B 5005BB 5005BC 5005BF 5005CM 5006 Range (5 Different colour finish) 5006B 5006BB 5006BC 5006BF 5006CM 5007 Range (5 Different colour finish) 5007B 5007BB 5007BC 5007BF 5007CM 580381 Instantor Pro Variants 580077 BF = Brushed Chrome Finish, CM = Chrome Finish, B = Brushed Black Finish, BB = Brushed Brass Finish, BC = Brushed Red Gold Finish.

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Instantor Works Santry Avenue Dublin

Postcode

D09 K160

Country

Ireland

Phone

+353(0)1 842 6255

General Email

Ryan.Charleson@Instantor.ie

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates plastic flow straighteners. The products are supplied with a 15x15mm compression single check valve assembly (suitable for backflow protection against Fluid Category 2) which also incorporates an isolation valve, intended for installation at each inlet. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

240903019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections x 15mm compression

Marking:

Bristan on the handle

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2029

Model:

TAP1119

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

241203018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Range of stainless steel braided EPDM or PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections

Marking:

Bristan on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/12/2029

Model:

TAP1102

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating non-rising spindle headworks with dome type or cross top operating members. Both models are supplied with a plastic flow straightener. Capable of achieving AUK3 Tap Gap Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

251214305

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2" BSP

Marking:

WIX on rear of body

Installation Requirements:

R001 R006 R010

Expiry date:

31/12/2030

Model:

410710 Angara Mono Mixer 311158 Angara Monobloc Kitchen Sink Mixer Tap Chrome

Approval Holder:

Wickes PLC

Company Name

Wickes PLC

Address

Vision House, Colonial Way, Watford.

Postcode

WD24 4JL

Country

United Kingdom

Phone

01923 656600

General Email

Steven.ferry@wickes.co.uk

View All Listings by this Company

Single hole, double outlet (swivel) combination tap assembly (chrome plated brass body). Incorporating a ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 Bar Maximum operating temperature 70.0°C

Section:

0490 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a double outlet and a swivel spout.

WRAS Approval Number:

250902036

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hoses with 1/2" BSP captive nut connections

Marking:

ST JAMES logo on body

Installation Requirements:

R001 R006 R009

Expiry date:

30/09/2030

Model:

580314

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Instantor Works Santry Avenue Dublin

Postcode

D09 K160

Country

Ireland

Phone

+353(0)1 842 6255

General Email

Ryan.Charleson@Instantor.ie

View All Listings by this Company

Range of deck mounted, two hole, double outlet (swivel) combination tap assemblies (brass bodies – various finishes). Incorporating quarter turn ceramic disc headworks (DLV305B, DLT305B) or non-rising spindle headworks (CR305 BRIDGE, CR305/501 BRIDGE) and single lever or cross top operating members. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0490 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a double outlet and a swivel spout.

WRAS Approval Number:

250904006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

DEVA, DTC 59 on underside of body.

Installation Requirements:

R001 R006

Expiry date:

30/09/2030

Model:

DLT305B Lever Action Bridge Sink Mixer DLV305B Lever Action Bridge Sink Mixer With 6" Levers CR305 BRIDGE Coronation Bridge Sink Mixer CR305/501 BRIDGE Coronation Bridge Sink Mixer – Gold

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Wall mounted, two hole, double outlet (swivel) combination tap assembly incorporating quarter turn ceramic disc headworks with single lever type operating members. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0490 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a double outlet and a swivel spout.

WRAS Approval Number:

250904007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

DEVA, DTC 59 etched on underside of body

Installation Requirements:

R001 R040

Expiry date:

30/09/2030

Model:

DLV305WM Lever Action Wall Mounted Bridge Sink Mixer With 6" Levers

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Two hole, single outlet (fixed) combination tap assemblies (brass body, chrome finish), incorporating quarter turn ceramic disc headworks and single lever operating members. The products are supplied with metal backnuts. Maximum working pressure 10 bar. Maximum operating temperature 85°C

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2310415

Size:

¾” BSP (M)

Marking:

ebb+flo on body

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2028

Model:

59441

Approval Holder:

Toolstation Ltd.

Company Name

Toolstation Ltd.

Address

Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2310184

Size:

3/4” BSP (M)

Marking:

ebb+flo on leg

Installation Requirements:

R001 R005 R010

Expiry date:

31/10/2028

Model:

27475

Approval Holder:

Toolstation Ltd.

Company Name

Toolstation Ltd.

Address

Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Wall mounted, two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a quarter turn ceramic disc headwork with dome type operating member. Temperature is controlled independently via thermostatic cartridge with single lever operating member. The inlets incorporate a stainless steel strainers and an approved check valve cartridge, however the complete product has not been fully tested to demonstrate It provides backflow protection. The spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250902020

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) x ¾” BSP (M) offset unions.

Marking:

Stern medical on tap body.

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2030

Model:

314720: Thermix 1000T.

Approval Holder:

Y. Stern Engineering (1989) Ltd

Company Name

Y. Stern Engineering (1989) Ltd

Address

15 Gan Rave Blvd. Yavne

Postcode

8122217

Country

Israel

Phone

+972 8 9326007

General Email

leah@sternfaucets.com

View All Listings by this Company

Range of two hole, single outlet fixed combination tap assemblies (brass bodies – various finishes), incorporating a ceramic cartridge headwork and a lever type operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250902022

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided, PEX lined flexible hose assemblies incorporating 3/8" BSP (F) captive nut end connections.

Marking:

Fantini logo on Spout.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Model:

53xxR504W Additional Information 01 = Gold plus 02 = Chrome 13 = Matt black 29 = Matt white 38 = Polished Stainless Steel 93= Brushed Stainless Steel 95 = Nickel PVD P5 = Matt Gun metal P6 = Matt British Gold P9 = Matt copper S1 = Deep Black Q7 = Pure Brass Q8 = Raw Metal 00 = No Finish

Manufacturer:

Fratelli Fantini Spa

Company Name

Fratelli Fantini Spa

Address

Via Buonarroti 4 28010 Pella Italy

View All Listings by this Company

Section:

0510 Combination Tap Assemblies

Description:

A Two hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Capable of achieving AUK3 tap gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Approval Holder:

ZHEJIANG CORAL SANITARY CO., LTD

Company Name

ZHEJIANG CORAL SANITARY CO., LTD

Address

KEYUAN ROAD NO.23.HUXIN INDUSTRIAL AREA CHUMEN TOWN, YUHUAN CITY, 317600

Postcode

317605

Country

China

Phone

0086-15888667668

General Email

wendy@coralbathroom.com

View All Listings by this Company

Manufacturers:

ZHEJIANG CORAL SANITARY CO., LTD

Section:

0510 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Capable of achieving AUK2 tap gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R005 R010

Expiry date:

30/09/2030

Approval Holder:

ZHEJIANG CORAL SANITARY CO., LTD

Company Name

ZHEJIANG CORAL SANITARY CO., LTD

Address

KEYUAN ROAD NO.23.HUXIN INDUSTRIAL AREA CHUMEN TOWN, YUHUAN CITY, 317600

Postcode

317605

Country

China

Phone

0086-15888667668

General Email

wendy@coralbathroom.com

View All Listings by this Company

Manufacturers:

ZHEJIANG CORAL SANITARY CO., LTD

Section:

0510 Combination Tap Assemblies

Description:

A Two hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Undefinable air gap, R040 applies.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2030

Approval Holder:

ZHEJIANG CORAL SANITARY CO., LTD

Company Name

ZHEJIANG CORAL SANITARY CO., LTD

Address

KEYUAN ROAD NO.23.HUXIN INDUSTRIAL AREA CHUMEN TOWN, YUHUAN CITY, 317600

Postcode

317605

Country

China

Phone

0086-15888667668

General Email

wendy@coralbathroom.com

View All Listings by this Company

Manufacturers:

ZHEJIANG CORAL SANITARY CO., LTD

Section:

0520 Combination Tap Assemblies

Description:

A Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

Deck or Wall Mounted Capable of achieving AUK3 Tap gap when deck mounted.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

30/09/2030

Notes & Further Information

1)No Suffix-Chrome 2)-**Represents the following different surface treatments: 1.H-Black 2.DYB - Matte white 3.BZ - Perl white painted 4.HGTS - Red bronze 5.HTL = Yellow bronze brushed 6.Q = Bronze 7.QTSL = Bronze brushed bright 8.QTS = Bronze brushed matte 9.STS = Acid copper brushed 10.SDMGJ = Water plated rose gold 11.N = Nickel brushed bright light 12.NP = Nickel brushed 13.TJ = Titanium gold 14.TJLS = Titanium gold brushed 15.G = Gold 16.GJS = Gold brushed 17.GJSY = Zirconium gold wire drawing matte 18.PGJFY = Zirconium gold wire drawing matte bright light 19.PLSJ = Brushed gold 20.LSJY = Brushed gold matte 21.MGJ = Rose gold 22.MGJL = Rose gold brushed 23.DMGJ = Light rose gold brushed 24.HTS = Red bronze brushed 25.QHP = Grey 26.LSQH = Grey brushed 27.LHMGJ = Brushed yellow rose gold

Approval Holder:

Taizhou Lanbiao Sanitary Ware Co., Ltd

Company Name

Taizhou Lanbiao Sanitary Ware Co., Ltd

Address

XUDOU VILLAGE QINGGANG YUHUAN ZHEJIANG

Postcode

317600

Country

China

Phone

13736601565

General Email

984458082@qq.com

View All Listings by this Company

Manufacturers:

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose, handset and metal backnuts. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

2310416

Size:

¾” BSP (M)

Marking:

ebb+flo on body

Installation Requirements:

R001 R006 R020

Expiry date:

31/10/2028

Model:

41318

Approval Holder:

Toolstation Ltd.

Company Name

Toolstation Ltd.

Address

Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Section:

0520 Combination Tap Assemblies

Description:

A Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

Deck mounted

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2030

Approval Holder:

ZHEJIANG CORAL SANITARY CO., LTD

Company Name

ZHEJIANG CORAL SANITARY CO., LTD

Address

KEYUAN ROAD NO.23.HUXIN INDUSTRIAL AREA CHUMEN TOWN, YUHUAN CITY, 317600

Postcode

317605

Country

China

Phone

0086-15888667668

General Email

wendy@coralbathroom.com

View All Listings by this Company

Manufacturers:

ZHEJIANG CORAL SANITARY CO., LTD

Section:

0550 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a swivel spout.

Deck mounted. Capable of achieving an AUK3 Tap Gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Notes & Further Information

Various finish： (1) Without suffix to current model number: Chrome plated (2) With suffix B: Black (3) With suffix BB: Brushed brass

Approval Holder:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturers:

Taizhou Shenglang Sanitary Ware Co, Ltd.

Section:

0570 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a double outlet and a swivel spout.

Deck mounted Capable of achieving AUK 3 Tap Gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006

Expiry date:

31/10/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of three-hole, single outlet, combination tap assemblies (brass bodies - various finishes). Incorporating a ceramic cartridge headwork with various operating members. The spout outlet incorporates a plastic aerator. Supplied with a pop-up or lever type waste – not verified by test. Maximum working pressure. 6.0 bar. Maximum operating temperature 65°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250902013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

WATERWORKS on escutcheon or end of spout.

Installation Requirements:

R001 R006 R008 R010

Expiry date:

30/09/2030

Model:

BLS2ZZX BLS6ZZX CLS2ZZX HLS2ZZX Followed by the legend of the type of lever/handle and surface finish. Suffix options: ZZ = represents handle components 0 Less Handles 1 Cross Handle 2 Two‐Tone Cross Handle 3 Coin Edge Cross Handle 10 Solo Series Lever Handle 11 Lever Handle 12 Two‐Tone Lever Handle 13 Coin Edge Lever Handle 14 Walnut Lever Handle 15 Leather Lever Handle 20 Solo Series Straight Lever Handle 2A Tandem Series Guilloche Lines Lever Handle 2B Tandem Series Two‐Tone Lever Handle 2C Union Series Guilloche Link Lever Handle 2D Union Series Enamel Guilloche Lines Lever Handle 2E Union Series Guilloche Pinstripe Lever Handle 2P Solo Series Two‐Piece Straight Lever Handle 2S Bond Rally Series Lever Handle 2T Teak Lever Handle 30 Solo Series Knob Handle 3S Bond Rally Series Knob Handle 4A Tandem Series Guilloche Lines Knob Handle 4B Tandem Series Two‐Tone Guilloche Knob Handle 4D Union Series Enamel Guilloche Lines Knob Handle 5C Union Series Guilloche Link Knob Handle 7A Tandem Series Guiloche Lines Lever handles with Gland Cover 7B Tandem Series Two Tone Lever handles with Gland Cover 7C Union Series Guiloche Link Lever handles with Gland Cover 7D Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P Solo Series Two Piece Straight Lever handle with Gland Cover 7S Bond Rally Series Lever Handle with Gland Cover 7T Tandem Series Teak lever with Gland Cover 8Z Straight Lever Handle 90 Solo Series Straight Lever handles with Gland Cover X = represents External Color or Finish Options AC Antique Copper AB Architectural Bronze AQB Antique Brass BZ Architectural Bronze C Polished Chrome CO Concordia DN Dark Nickel G Gold L Lumin M Matte Nickel MC Matte Chrome MG Matte Gold MS Matte Silver N Polished Nickel S Silver SC Shiny Copper SO Sovereign UB Unlacquered Brass

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London WC1N2EB

View All Listings by this Company

Range of three-hole, metal, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes). Incorporating a quarter turn ceramic disc headwork with various operating members. The spout outlet incorporates a plastic aerator. Supplied with a pop-up waste – not verified by test. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250902014

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

WATERWORKS on rear or on edge of spout outlet.

Installation Requirements:

R001 R006 R008 R010

Expiry date:

30/09/2030

Model:

CLS1ZZX HLS1ZZX BLS5XXZ Suffix Options: ZZ = represents handle components 0 Less Handles 1 Cross Handle 2 Two‐Tone Cross Handle 3 Coin Edge Cross Handle 10 Solo Series Lever Handle 11 Lever Handle 12 Two‐Tone Lever Handle 13 Coin Edge Lever Handle 14 Walnut Lever Handle 15 Leather Lever Handle 20 Solo Series Straight Lever Handle 2A Tandem Series Guilloche Lines Lever Handle 2B Tandem Series Two‐Tone Lever Handle 2C Union Series Guilloche Link Lever Handle 2D Union Series Enamel Guilloche Lines Lever Handle 2E Union Series Guilloche Pinstripe Lever Handle 2P Solo Series Two‐Piece Straight Lever Handle 2S Bond Rally Series Lever Handle 2T Teak Lever Handle 30 Solo Series Knob Handle 3S Bond Rally Series Knob Handle 4A Tandem Series Guilloche Lines Knob Handle 4B Tandem Series Two‐Tone Guilloche Knob Handle 4D Union Series Enamel Guilloche Lines Knob Handle 5C Union Series Guilloche Link Knob Handle 7A Tandem Series Guiloche Lines Lever handles with Gland Cover 7B Tandem Series Two Tone Lever handles with Gland Cover 7C Union Series Guiloche Link Lever handles with Gland Cover 7D Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P Solo Series Two Piece Straight Lever handle with Gland Cover 7S Bond Rally Series Lever Handle With Gland Cover 7T Tandem Series Teak lever with Gland Cover 8Z Straight Lever Handle 90 Solo Series Straight Lever handles with Gland Cover X = represents External Color or Finish Options AC Antique Copper AB Architectural Bronze AQB Antique Brass BZ Architectural Bronze C Polished Chrome CO Concordia DN Dark Nickel G Gold L Lumin M Matte Nickel MC Matte Chrome MG Matte Gold MS Matte Silver N Polished Nickel S Silver SC Shiny Copper SO Sovereign UB Unlacquered Brass

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London WC1N2EB

View All Listings by this Company

Range of three-hole, metal, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes). Incorporating a quarter turn ceramic disc headworks with various operating members. The spout outlet incorporates a plastic aerator. Supplied with a pop-up waste – not verified by test. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250902015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

WATERWORKS on rear of body and on adhesive label on rear of body or WATERWORKS on edge of spout.

Installation Requirements:

R001 R006 R008 R010

Expiry date:

30/09/2030

Model:

BLS1ZZX 8 Suffix Options: ZZ = represents handle components 0 Less Handles 1 Cross Handle 2 Two‐Tone Cross Handle 3 Coin Edge Cross Handle 10 Solo Series Lever Handle 11 Lever Handle 12 Two‐Tone Lever Handle 13 Coin Edge Lever Handle 14 Walnut Lever Handle 15 Leather Lever Handle 20 Solo Series Straight Lever Handle 2A Tandem Series Guilloche Lines Lever Handle 2B Tandem Series Two‐Tone Lever Handle 2C Union Series Guilloche Link Lever Handle 2D Union Series Enamel Guilloche Lines Lever Handle 2E Union Series Guilloche Pinstripe Lever Handle 2P Solo Series Two‐Piece Straight Lever Handle 2S Bond Rally Series Lever Handle 2T Teak Lever Handle 30 Solo Series Knob Handle 3S Bond Rally Series Knob Handle 4A Tandem Series Guilloche Lines Knob Handle 4B Tandem Series Two‐Tone Guilloche Knob Handle 4D Union Series Enamel Guilloche Lines Knob Handle 5C Union Series Guilloche Link Knob Handle 7A Tandem Series Guiloche Lines Lever handles with Gland Cover 7B Tandem Series Two Tone Lever handles with Gland Cover 7C Union Series Guiloche Link Lever handles with Gland Cover 7D Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P Solo Series Two Piece Straight Lever handle with Gland Cover 7S Bond Rally Series Lever Handle With Gland Cover 7T Tandem Series Teak lever with Gland Cover 8Z Straight Lever Handle 90 Solo Series Straight Lever handles with Gland Cover X = represents External Color or Finish Options AC Antique Copper AB Architectural Bronze AQB Antique Brass BZ Architectural Bronze C Polished Chrome CO Concordia DN Dark Nickel G Gold L Lumin M Matte Nickel MC Matte Chrome MG Matte Gold MS Matte Silver N Polished Nickel S Silver SC Shiny Copper SO Sovereign UB Unlacquered Brass

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London WC1N2EB

View All Listings by this Company

Section:

0650 Combination Tap Assemblies

Description:

A Three hole tap(s) with a single outlet and a fixed spout.

Deck mounted Capable of achieving AUK3 Tap gap Stainless steel braided PEX lined Inlet Hose Stainless steel braided PEX lined connection Hose

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Notes & Further Information

* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black

Approval Holder:

WINSDRUM Technology (Foshan) Co., Ltd

Company Name

WINSDRUM Technology (Foshan) Co., Ltd

Address

Room 804-805, Flat 2, Jiabang Guojin Center, No.1 Shilong South Road, Guicheng Street, Nanhai District, Foshan City, Guangdong Province

Country

China

Phone

0086-19527590441

General Email

carina07@126.com

View All Listings by this Company

Range of three-hole, single outlet (fixed) wall mounted combination tap assemblies, (brass bodies - various finishes). Incorporating a quarter turn ceramic disc headwork with lever or cross top operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250904003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

C.P.HART on back plate.

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2030

Model:

CPHW0333D (CP/MB/BRG/BGM/BB/BN/PB) Dios Three Piece Wall Mounted Basin Mixer CP：Chrome plating MB：Matt black BRG：Brushed red gold BGM：Gun mental BB：Brushed brass BN：Brushed nickel PB：polished black

Approval Holder:

C.P.Hart

Company Name

C.P.Hart

Address

Unit 40 Charles Park Claire Causeways Crossways Business Park Dartford

Postcode

DA2 6QA

Country

United Kingdom

General Email

roy.davis@cphart.co.uk

View All Listings by this Company

Section:

0650 Combination Tap Assemblies

Description:

A Range of Three hole tap(s) with a single outlet and a fixed spout.

Wall Mounted Concealed. Undefinable Air Gap – See IRN’s.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2030

Notes & Further Information

*denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black

Approval Holder:

WINSDRUM Technology (Foshan) Co., Ltd

Company Name

WINSDRUM Technology (Foshan) Co., Ltd

Address

Room 804-805, Flat 2, Jiabang Guojin Center, No.1 Shilong South Road, Guicheng Street, Nanhai District, Foshan City, Guangdong Province

Country

China

Phone

0086-19527590441

General Email

carina07@126.com

View All Listings by this Company

Range of combined bath waste and overflow assemblies in various finishes.(see models for finishes) Maximum operating temperature: 60ºC

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

241002112

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

Stainless steel braided, EPDM lined, flexible hose assembly with 1½” BSP (M) (Pop Up Waste)

Marking:

Bagnodesign logo on face plate & WRAS on hose connection ferrule.

Installation Requirements:

R001 R576

Expiry date:

31/10/2029

Model:

BDP-ZEP-110-XX (waste and overflow). XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

Country

United Kingdom

General Email

dan@sanipexgroup.com

View All Listings by this Company

Range of free-standing sanitary macerating disposal units. The units are fed via a flexible hose assembly. Flow is controlled by a solenoid valve and discharges via a type `AB` air gap (verified by test, suitable of fluid category 5 backflow protection). Maximum working pressure 6.0 Bar Maximum operating temperature 40.0°C

Section:

0950 Disposal Unit(s)

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

PVC hose with 3/4" BSP captive nut end connections.

Marking:

DDC and Pulpmatic flex on front of unit body

Installation Requirements:

R001 R574

Expiry date:

30/09/2030

Model:

FLX000-50HZ 240V - Pulpmatic Flex Macerator FLX000-60HZ 110V - Pulpmatic Flex Macerator UL

Manufacturer:

DDC Dolphin Ltd.

Company Name

DDC Dolphin Ltd.

Address

The Fulcrum, Vantage Way, Poole

Postcode

BH12 4NU

Country

Dorset,

Phone

+44 (0)1202 724858

View All Listings by this Company

Shock arrestor with stainless steel body and EPDM diaphragm. Maximum working pressure 15.0 bar. Maximum operating temperature 100°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Valtech on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

WPT03.

Approval Holder:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

Room 610 New Oriental Times Building No. 1130 Biaizhang East Road Ningbo Zhejiang

Country

China

Phone

+86 0574 88001556

View All Listings by this Company

Manufacturer:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

Export Processing Zone, Beilun Bonded South Zone, Ningbo City, Zhejiang Province (No. 6 Zhufeng Road)

View All Listings by this Company

F1C compression & F5 press fittings for use with B1 multilayer PEX/AL/PEX pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250406702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

12mm, 16mm, 20mm, 25mm, 26mm & 32mm.

Marking:

Fittings: Rifeng, Size, crimp profile (U), date of manufacture (yyyy/mm), on crimp sleeve. Pipes: Rifeng, PEXb/AL/PEXb, pressure, size, date of manufacture & batch no.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

B1 multilayer PEX/AL/PEX pipe, F1C compression fittings & F5 press fittings. Pipe: Multilayer PEX/AL/PEX Pipes B1-0912 Multilayer PEX/AL/PEX Pipes B1-1216 Multilayer PEX/AL/PEX Pipes B1-1620 Multilayer PEX/AL/PEX Pipes B1-2025 Multilayer PEX/AL/PEX Pipes B1-2026 Multilayer PEX/AL/PEX Pipes B1-2632 F5 Equal straight union: F5-S0912*0912 F5-S1216*1216 F5-S1620*1620 F5-S2025*2025 F5-S2026*2026 F5-S2632*2632 F5 Reducer: F5-S1216*0912 F5-S1620*0912 F5-S1620*1216 F5-S2025*0912 F5-S2025*1216 F5-S2025*1620 F5-S2026*0912 F5-S2026*1216 F5-S2026*1620 F5-S2632*0912 F5-S2632*1216 F5-S2632*1620 F5-S2632*2025 F5-S2632*2026 F5 Male straight union: F5-S0912*1/2 F5-S0912*3/4 F5-S1216*3/8 F5-S1216*1/4 F5-S1216*1/2 F5-S1216*3/4 F5-S1216*1 F5-S1620*3/8 F5-S1620*1/2 F5-S1620*3/4 F5-S1620*1 F5-S2025*1/2 F5-S2025*3/4 F5-S2025*1 F5-S2026*1/2 F5-S2026*3/4 F5-S2026*1 F5-S2632*1/2 F5-S2632*3/4 F5-S2632*1 F5-S2632*1 1/4 F5-S2632*1 1/2 F5 Female straight union: F5-S0912*1/2F F5-S0912*3/4F F5-S1216*3/8F F5-S1216*1/4F F5-S1216*1/2F F5-S1216*3/4F F5-S1216*1F F5-S1620*3/8F F5-S1620*1/2F F5-S1620*3/4F F5-S1620*1F F5-S2025*1/2F F5-S2025*3/4F F5-S2025*1F F5-S2026*1/2F F5-S2026*3/4F F5-S2026*1F F5-S2632*1/2F F5-S2632*3/4F F5-S2632*1F F5-S2632*1 1/4F F5-S2632*1 1/2F F5 Equal elbow: F5-L0912*0912 F5-L1216*1216 F5-L1620*1620 F5-L2025*2025 F5-L2026*2026 F5-L2632*2632 F5 Equal elbow (45°): F5-L0912*0912 (45°) F5-L1216*1216 (45°) F5-L1620*1620 (45°) F5-L2025*2025 (45°) F5-L2026*2026 (45°) F5-L2632*2632(45°) F5 Unequal elbow: F5-L1216*0912 F5-L1620*0912 F5-L1620*1216 F5-L2025*0912 F5-L2025*1216 F5-L2025*1620 F5-L2026*0912 F5-L2026*1216 F5-L2026*1620 F5-L2632*0912 F5-L2632*1216 F5-L2632*1620 F5-L2632*2025 F5-L2632*2026 F5 Male elbow: F5-L0912*1/2 F5-L0912*3/4 F5-L1216*3/8 F5-L1216*1/4 F5-L1216*1/2 F5-L1216*3/4 F5-L1216*1 F5-L1620*3/8 F5-L1620*1/2 F5-L1620*3/4 F5-L1620*1 F5-L2025*1/2 F5-L2025*3/4 F5-L2025*1 F5-L2026*1/2 F5-L2026*3/4 F5-L2026*1 F5-L2632*1/2 F5-L2632*3/4 F5-L2632*1 F5-L2632*1 1/4 F5-L2632*1 1/2 F5 Female elbow: F5-L0912*1/2F F5-L0912*3/4F F5-L1216*3/8F F5-L1216*1/4F F5-L1216*1/2F F5-L1216*3/4F F5-L1216*1F F5-L1620*3/8F F5-L1620*1/2F F5-L1620*3/4F F5-L1620*1F F5-L2025*1/2F F5-L2025*3/4F F5-L2025*1F F5-L2026*1/2F F5-L2026*3/4F F5-L2026*1F F5-L2632*1/2F F5-L2632*3/4F F5-L2632*1F F5-L2632*1 1/4F F5-L2632*1 1/2F F5 Equal tee: F5-T0912*0912*0912 F5-T1216*1216*1216 F5-T1620*1620*1620 F5-T2025*2025*2025 F5-T2026*2026*2026 F5-T2632*2632*2632 F5 Unequal tee: F5-T1216*1620*1216 F5-T1620*1216*1216 F5-T1620*1620*1216 F5-T1620*2025*1620 F5-T2025*1216*1216 F5-T2025*1216*1620 F5-T2025*1216*2025 F5-T2025*1620*1216 F5-T2025*1620*1620 F5-T2025*1620*2025 F5-T2025*2025*1216 F5-T2025*2025*1620 F5-T2025*2632*2025 F5-T2632*1216*2632 F5-T2632*1620*2632 F5-T2632*2025*2025 F5-T2632*2025*2632 F5-T0912*1216*0912 F5-T2632*2026*2632 F5-T1620*1216*1620 F5-T1216*2025*1216 F5 Male tee: F5-T0912*1/2*0912 F5-T0912*3/4*0912 F5-T1216*3/8*1216 F5-T1216*1/4*1216 F5-T1216*1/2*1216 F5-T1216*3/4*1216 F5-T1216*1*1216 F5-T1620*3/8*1620 F5-T1620*1/2*1620 F5-T1620*3/4*1620 F5-T1620*1*1620 F5-T2025*1/2*2025 F5-T2025*3/4*2025 F5-T2025*1*2025 F5-T2026*1/2*2026 F5-T2026*3/4*2026 F5-T2026*1*2026 F5-T2632*1/2*2632 F5-T2632*3/4*2632 F5-T2632*1*2632 F5-T2632*1 1/4*2632 F5-T2632*1 1/2*2632 F5 Female tee: F5-T0912*1/2F*0912 F5-T0912*3/4F*0912 F5-T1216*3/8F*1216 F5-T1216*1/4F*1216 F5-T1216*1/2F*1216 F5-T1216*3/4F*1216 F5-T1216*1F*1216 F5-T1620*3/8F*1620 F5-T1620*1/2F*1620 F5-T1620*3/4F*1620 F5-T1620*1F*1620 F5-T2025*1/2F*2025 F5-T2025*3/4F*2025 F5-T2025*1F*2025 F5-T2026*1/2F*2026 F5-T2026*3/4F*2026 F5-T2026*1F*2026 F5-T2632*1/2F*2632 F5-T2632*3/4F*2632 F5-T2632*1F*2632 F5-T2632*1 1/4F*2632 F5-T2632*1 1/2F*2632 F5 Demountable female straight union: F5-S0912*1/2F(H) F5-S0912*3/4F(H) F5-S1216*3/8F(H) F5-S1216*1/4F(H) F5-S1216*1/2F(H) F5-S1216*3/4F(H) F5-S1216*1F(H) F5-S1620*3/8F(H) F5-S1620*1/2F(H) F5-S1620*3/4F(H) F5-S1620*1F(H) F5-S2025*1/2F(H) F5-S2025*3/4F(H) F5-S2025*1F(H) F5-S2026*1/2F(H) F5-S2026*3/4F(H) F5-S2026*1F(H) F5-S2632*1/2F(H) F5-S2632*3/4F(H) F5-S2632*1F(H) F5-S2632*1 1/4F(H) F5-S2632*1 1/2F(H) F5 End cap: F5-D0912 F5-D1216 F5-D1620 F5-D2025 F5-D2026 F5-D2632 F1C End cap: F1-D0912 F1-D1216 F1-D1620 F1-D2025 F1-D2026 F1-D2632 F5 Connector core: F5-C1216x1/2 F5-C1620x1/2 F5-C1216x3/4 F5-C1620x3/4 F5-C2025x3/4 F5 Wall plated female elbow: F5-L1216x1/2F (Z) F5-L1620x1/2F (Z) F5-L1620x3/4F (Z) F5-L1216x1/2F (Z4) F5-L1620x1/2F (Z4) F5-L1620x3/4F (Z4) F1 MLCP to Copper Adaptor: F1-S1216x15Cu C (MUL) F1-S1620x15Cu C (MUL) F1-S1620x22Cu C (MUL) F1-S2025x22Cu C (MUL) F1-S2025x28Cu C (MUL) F1-S2632x28Cu C (MUL) F1-S1216x15Cu2 C F1-S1620x15Cu2 C F1-S2025x28Cu2 C F1-S2632x28Cu2 C F5 MLCP to Copper Adaptor: F5-S1216x15Cu (MUL) F5-S1620x15Cu (MUL) F5-S1620x22Cu (MUL) F5-S2025x22Cu (MUL) F5-S2025x28Cu (MUL) F5-S2632x28Cu (MUL) F5-S1216x15Cu (150) F5-S1620x22Cu (150) F5-S1216x15Cu2 F5-S1620x22Cu2 F5-S2025x22Cu2 F5-S2632x28Cu2 Radiator elbow copper adapter: F5-L1216xφ15S Assembly Double Fittings: F5-L1216xφ15S (Z1) (GZ1) Copper Radiator Tee: F5-T1216xφ15Sx1216

Approval Holder:

Rifeng Enterprise (Foshan) Co., Ltd.

Company Name

Rifeng Enterprise (Foshan) Co., Ltd.

Address

F1-F14 Building No. 1 Rifeng Road Leping Town Sanshui District Foshan City Guangdong Province

Postcode

528318

Country

China

Phone

+86 757 8203 1672

General Email

lio-lu@rifeng.com

View All Listings by this Company

Range of DZR brass compression fittings for use with Q-Therm PEX-b Pipes (SDR 7.4) Maximum working pressure:20 bar, cold water use only

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250902040

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

16mm and 20mm

Marking:

Q-THERM, UAE, DZR and SIZE on compression nut. Pipe: “Q-THERM, 16mm х 2.2mm PE-Xb PN20 DIN 16892/93 ISO 15875 7NO 95° WRAS APPROVED MATERIAL HH: MM DD/MM/YYYY Made in UAE(RAK)

Installation Requirements:

R001 R008

Expiry date:

30/09/2030

Model:

PX00PS2000Y: Q-Therm PEX-b Pipe, DN 16mm, SDR 7.4, PN20, 16mm x 2.2mm PX00PS2001Y: Q-Therm PEX-b Pipe DN 20mm, SDR 7.4, PN20, 20mm x 2.8mm PXYCBE0001R Q-Therm (DZR Brass Concealed Female Elbow with Blue Box) 16mm x ½” BSP (M) (DZR Brass Compression Fitting) PXYCBE0101R Q-Therm (DZR Brass Concealed Female Elbow with Blue Box) 20mm x ½” BSP (M) (DZR Brass Compression Fitting) PXYCRE0001R Q-Therm (DZR Brass Concealed Female Elbow with Red Box) 16mm x ½” BSP (M) (DZR Brass Compression Fitting) PXYCRE0101R Q-Therm (DZR Brass Concealed Female Elbow with Red Box) 20mm x ½” BSP (M (DZR Brass Compression Fitting) PXYCMA0001R Q-Therm DZR Brass Male PE-X Adaptor 16mm x ½” BSP (M) (DZR Brass Compression Fitting) PXYCMA0101R Q-Therm DZR Brass Male PE-X Adaptor 20mm x ½” BSP (M) (DZR Brass Compression Fitting)

Manufacturer:

Quantum Industries LLC

Company Name

Quantum Industries LLC

Address

Al Ghail Industrial Park, Ras Al Khaimah, PB 86488

Country

UAE

View All Listings by this Company

Range of compression fittings with brass, nickel plated brass bodies for use with copper pipe (manufactured to EN 1057). For above ground use only. Max working pressure 16.0 bar. Max operating temperature 85°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241004055

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

8mm – 54mm. ¼” - 1¼” BSP (M) or (F). Added June 2025: Additional 8 - 35mm sizes (see model). 42mm - 54mm. 1½” - 2” BSP (M) or (F).

Marking:

MT(Brand name) , Size, WRAS and EN 1254-2 on compression nut.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

Equal Straight: 6601012 - 12×12 6601015 - 15×15 6601018 - 18×18 6601022 - 22×22 6601028 - 28×28 6601035 - 35×35 6601042 - 42x42 6601054 - 54x54 6701008 8×8 6701010 - 10×10 6701012 - 12×12 6701014 - 14×14 6701015 - 15×15 6701016 - 16×16 6701018 - 18×18 6701022 - 22×22 6701028 - 28×28 6701035 - 35×35 6701042 - 42x42 6701054 - 54x54 Reducing Straight: 660101815 - 18×15 660102215 - 22×15 660102218 - 22×18 660102822 - 28×22 670101008 - 10×8 670101210 - 12×10 670101508 - 15×8 670101510- 15×10 670101512 - 15×12 670101815 - 18×15 670102215 - 22×15 670102822 - 28×22 Female Straight 660201215 - 12×1/2" F 660201510 - 15×3/8" F 660201515 - 15×1/2" F 660201520 - 15×3/4" F 660201525 - 15×1" F 660201815 - 18×1/2" F 660201820 - 18×3/4" F 660202215 - 22×1/2" F 660202220 - 22×3/4" F 660202215 - 22×1" F 660202820 - 28×3/4" F 660202825 - 28×1" F 670200810 - 8×3/8" F 670201010 - 10×3/8" F 670201015 - 10×1/2" F 670201210 - 12×3/8" F 670201215 - 12×1/2" F 670201415 - 14×1/2" F 670201510 - 15×3/8" F 670201515 - 15×1/2" F 670201520 - 15×3/4" F 670201525 - 15×1" F 670201615 - 16×1/2"F 670201620 - 16×3/4" F 670201815 - 18×1/2" F 670201820 - 18×3/4" F 670202215 - 22×1/2" F 670202220 - 22×3/4" F 670202225 - 22×1" F 670202820 - 28×3/4" F 670202825 - 28×1" F 670203532 - 35×1 1/4"F 670204240 - 42×1 1/2" F 670205450 - 54×2" F Male Straight: 670301510 - 15×3/8"M 670301515 - 15×1/2"M 670301520- 15×3/4"M 670301815 - 18×1/2"M 670301820 - 18×3/4"M 670302215 - 22×1/2"M 670302220 - 22×3/4"M 670302225- 22×1"M 660302820 - 28×3/4"M 660302825 - 28×1"M 670300806F - 8×1/8"M 670301210F - 12×3/8"M 670301215F - 12×1/2"M 670301410F - 14×3/8"M 670301415F - 14×1/2"M 670301515 - 15×1/2"M 670301520F - 15×3/4"M 670301615F - 16×1/2"M 670301815F - 18×1/2"M 670301820F - 18×3/4"M 670302215 - 22×1/2"M 670302220 - 22×3/4"M 670302820F - 28×3/4"M 670302825 - 28×1"M 670303532F - 35×1 1/4"M 670304240F - 42×1 1/2"M Equal Elbow: 6604015 - 15×15 6604018 - 18×18 6604022 - 22×22 6604028 - 28×28 6604035 - 35×35 6604042 - 42×1 1/2"M 6604054 - 54 x 54 6704008 - 8×8 6704010 - 10×10 6704012 - 12×12 6704014 - 14×14 6704015 - 15×15 6704016 - 16×16 6704018 - 18×18 6704022 - 22×22 6704028 - 28×28 6704035 - 35×35 6704042 - 42x42 6704054 - 54x54 Female Elbow: 670501215 - 12×1/2"F 670501515 - 15×1/2"F 670501520 - 15×3/4"F 670501815 - 18×1/2"F 670501820 - 18×3/4"F 670502215 - 22×1/2"F 670502220 - 22×3/4"F 670582225 - 22×1"F 670502825 - 28×1"F 660501515 - 15×1/2"F 660501520 - 15×3/4"F 660501815 - 18×1/2"F 660501820 - 18×3/4"F 660502215- 22×1/2"F 660502220 - 22×3/4"F 660502225 - 22×1"F 660502825 - 28×1"F Male Elbow: 660601515 - 15×1/2"M 660601520 - 15×3/4"M 660601815 - 18×1/2"M 660601820 - 18×3/4"M 660602215 - 22×1/2"M 660602220 - 22×3/4"M 660602225 - 22×1"M 660602825 - 28×1"M 670601215 - 12×1/2"M 670601415- 14×1/2"M 670601515 - 15×1/2"M 670601520 - 15×3/4"M 670601615 - 16×1/2"M 670601815 - 18×1/2"M 670601820 - 18×3/4"M 670602215 - 22×1/2"M 670602220 - 22×3/4"M 670602225 - 22×1"M 670602825 - 28×1"M Equal Tee: 6608015 - 15×15×15 6608018 - 18×18×18 6608022 - 22×22×22 6608028 - 28×28×28 6608035- 35×35×35 6608042 - 42×42×42 6608054 - 54×54×54 6708010 - 10×10×10 6708012 - 12×12×12 6708014 - 14×14×14 6708015 - 15×15×15 6708016 - 16×16×16 6708018 - 18×18×18 6708022 - 22×22×22 6708028 - 28×28×28 6708035 - 35×35×35 Reducing Tee: 66090152215 - 15×15×22 66090181518 - 18×18×15 66090181815 - 18×15×18 66090221515 - 22×15×15 66090222215- 22×15×22 66090221522 - 22×22×15 66090221822 - 22×22×18 66090282815 - 28×15×28 66090282222 - 28×22×22 66090282822 - 28×22×28 67090152215 -15×15×22 67090181518 - 18×18×15 67090181815 - 18×15×18 67090221515 - 22×15×15 67090222215 - 22×15×22 67090221522 - 22×22×15 67090282815 - 28×15×28 67090282222 - 28×22×22 67090282822 - 28×22×28 Female Tee: 66100151515 - 15×1/2“F 66100181518 - 18×1/2“F 66100182018 - 18×3/4“F 66100221522 - 22×1/2”F 66100222022 - 22×3/4”F 66100282028 - 28×3/4”F 66100282528- 28×1”F 67100151515- 15×1/2“F 67100181518 - 18×1/2“F 67100182018 - 18×3/4“F 67100221522 - 22×1/2”F 67100222022 - 22×3/4”F Wall Plate Elbow: 661101515 - 15×1/2"F 661101815 - 18×1/2"F 661101820 - 18×3/4"F 661102215 - 22×1/2"F 661102220 - 22×3/4"F 671101515 - 15×1/2"F 671102215 - 22×1/2"F 671102220 - 22×3/4"F Stop End: 6607015 - 15 6607018 - 18 6607022 - 22 670708 - 8 6707010 - 10 6707012 - 12 6707015 - 15 6707018 - 18 6707022 - 22 6707028 - 28 Bent Tap Connector: 671301515 - 15×1/2"F 671302220 - 22×3/4"F Crossover Bridge: 6612015 - 15×15 6612018 - 18×18 6612022 - 22×22 6712015 - 15×15 6712022 - 22×22 Where for all models: No suffix = brass body, NP suffix = nickel plated brass,

Approval Holder:

Business Key, S.L.

Company Name

Business Key, S.L.

Address

Poligono Industrial Camps d’En Ricart Carrer Comerç, 10 naves 4-9 08780 Pallejà (Barcelona)

Country

Spain

View All Listings by this Company

‘HLBRxx’ range of brass or DZR brass compression fittings for use with copper pipe (manufactured to EN 1057). The HLBRTC‐1 tank connector, HLBRSS‐1 and HLBRBS‐1 tap connectors all incorporate an EPDM washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250915008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model: 8-54mm, ¼” - 2” BSP (M) or (F).

Marking:

HL and size on nut or body. DZR brass fittings are also marked CR.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

HLBRRC‐1 Reducing Coupling 10mm x 8mm, HLBRRC‐1 Reducing Coupling 15mm x 8mm, HLBRRC‐1 Reducing Coupling 15mm x 10mm, HLBRRC‐1 Reducing Coupling 15mm x 12mm, HLBRRC‐1 Reducing Coupling 22mm x 15mm, HLBRRC‐1 Reducing Coupling 28mm x 15mm, HLBRRC‐1 Reducing Coupling 28mm x 22mm, HLBRSS‐1 Straight Swivel Tap Connector 15mm x 1/2", HLBRSS‐1 Straight Swivel Tap Connector 15mm x 3/4", HLBRSS‐1 Straight Swivel Tap Connector 22mm x 3/4", HLBRBS‐1 Bent Swivel Tap Connector 15mm x 1/2", HLBRBS‐1 Bent Swivel Tap Connector 22mm x 3/4", HLBRTC‐1 Tank Connector 15mm, HLBRTC‐1 Tank Connector 22mm, HLBRTC‐1 Tank Connector 28mm, HLBRTC‐1 Tank Connector 35mm, HLBRER‐1 Elbow Reducer 22mm x 15mm, HLBRFB‐1 Female Backplate Elbow 15mm x 1/2" female, HLBRFB‐1 Female Backplate Elbow 22mm x 3/4" female, HLBRCN‐1 Compression Nut 15mm, HLBRCN‐1 Compression Nut 22mm, HLBRCN‐1 Compression Nut 28mm, HLBRCC‐1 Compression Cap / Blank Nut 1/2", HLBRCB‐1 Compression Blank Capnut 22mm, HLBRRT‐1 Reducing Tee 15mm x 15mm x 22mm, HLBRRT‐1 Reducing Tee 22mm x 15mm x 15mm, HLBRRT‐1 Reducing Tee 22mm x 15mm x 22mm, HLBRRT‐1 Reducing Tee 22mm x 22mm x 15mm, HLBRRT‐1 Reducing Tee 22mm x 22mm x 28mm, HLBRRT‐1 Reducing Tee 28mm x 28mm x 15mm, HLBRRT‐1 Reducing Tee 28mm x 15mm x 28mm, HLBRRT‐1 Reducing Tee 28mm x 28mm x 22mm, HLBRFB‐2 Female Branch Tee 15mm x 15mm x 1/2", HLBRFB‐2 Female Branch Tee 22mm x 22mm x 1/2", HLBRFB‐2 Female Branch Tee 22mm x 22mm x 3/4", HLBRFB‐2 Female Branch Tee 28mm x 28mm x 1/2", HLBRFE‐2 Female End Tee 15mm x 1/2" x 15mm, HLBRRS‐1 Reducing Set (3 part) 15mm x 8mm, HLBRRS‐1 Reducing Set (3 part) 15mm x 10mm, HLBRRS‐1 Reducing Set (3 part) 22mm x 15mm, HLBRRS‐1 Reducing Set (3 part) 28mm x 15mm, HLBRRS‐1 Reducing Set (3 part) 28mm x 22mm, HLBRRS‐1 Reducing Set (3 part) 35mm x 22mm, HLBRTA‐1 Tap Adaptor Male x Female 1/2", HLBRBR‐1 Burst Repair Coupling 15mm x 15mm x 80mm, HLBRSC‐1 Straight Coupling 8mm, HLBRSC‐1 Straight Coupling 10mm, HLBRSC‐1 Straight Coupling 15mm, HLBRSC‐1 Straight Coupling 22mm, HLBRSC‐1 Straight Coupling 28mm, HLBRSC‐1 Straight Coupling 35mm, HLBRSC‐1 Straight Coupling 42mm, HLBRSC‐1 Straight Coupling 54mm, HLBRMC‐1 Male Coupling 8mm x 1/4" male, HLBRMC‐1 Male Coupling 10mm x 1/4" male, HLBRMC‐1 Male Coupling 10mm x 1/2" male, HLBRMC‐1 Male Coupling 10mm x 3/8" male, HLBRMC‐1 Male Coupling 15mm x 1/4" male, HLBRMC‐1 Male Coupling 15mm x 3/8" male, HLBRMC‐1 Male Coupling 15mm x 1/2" male, HLBRMC‐1 Male Coupling 15mm x 3/4" male, HLBRMC‐1 Male Coupling 22mm x 1/2" male, HLBRMC‐1 Male Coupling 22mm x 3/4" male, HLBRMC‐1 Male Coupling 22mm x 1" male, HLBRMC‐1 Male Coupling 28mm x 1" male, HLBRMC‐1 Male Coupling 28mm x 1.1/4" male, HLBRMC‐1 Male Coupling 35mm x 1.1/4" male, HLBRMC‐1 Male Coupling 42mm x 1. 1/2" male, HLBRMC‐1 Male Coupling 54mm x 2" male, HLBRFC‐1 Female Coupling 8mm x 1/4" female, HLBRFC‐1 Female Coupling 10mm x 1/4" female, HLBRFC‐1 Female Coupling 10mm x 3/8" female, HLBRFC‐1 Female Coupling 10mm x 1/2" female, HLBRFC‐1 Female Coupling 15mm x 1/2" female, HLBRFC‐1 Female Coupling 15mm x 3/8" female, HLBRFC‐1 Female Coupling 15mm x 3/4" female, HLBRFC‐1 Female Coupling 22mm x 1/2" female, HLBRFC‐1 Female Coupling 22mm x 3/4" female, HLBRFC‐1 Female Coupling 22mm x 1" female, HLBRFC‐1 Female Coupling 28mm x 1" female , HLBRFC‐1 Female Coupling 35mm x 1.1/4" female, HLBRFC‐1 Female Coupling 42mm x 1.1/2" female, HLBRFC‐1 Female Coupling 54mm x 2" female, HLBRSE‐1 Stop End 8mm, HLBRSE‐1 Stop End 10mm, HLBRSE‐1 Stop End 15mm, HLBRSE‐1 Stop End 22mm, HLBRSE‐1 Stop End 28mm, HLBRSE‐1 Stop End 35mm, HLBRSE‐1 Stop End 42mm, HLBRSE‐1 Stop End 54mm, HLBRIR‐1 Internal Reducer 15mm x 8mm, HLBRIR‐1 Internal Reducer 10mm x 8mm, HLBRIR‐1 Internal Reducer 15mm x 10mm, HLBRIR‐1 Internal Reducer 22mm x 15mm, HLBRIR‐1 Internal Reducer 28mm x 15mm, HLBRIR‐1 Internal Reducer 28mm x 22mm, HLBRE‐1 Elbow 8mm, HLBRE‐1 Elbow 10mm, HLBRE‐1 Elbow 15mm, HLBRE‐1 Elbow 22mm, HLBRE‐1 Elbow 28mm, HLBRE‐1 Elbow 35mm, HLBRE‐1 Elbow 42mm, HLBRME‐1 Male Elbow 15mm x 1/2" male, HLBRME‐1 Male Elbow 15mm x 3/4" male, HLBRME‐1 Male Elbow 22mm x 3/4" male, HLBRME‐1 Male Elbow 22mm x 1" male, HLBRME‐1 Male Elbow 28mm x 1" male, HLBRFE‐1 Female Elbow 15mm x 1/2" female, HLBRFE‐1 Female Elbow 15mm x 3/4" female, HLBRFE‐1 Female Elbow 22mm x 3/4" female, HLBRFE‐1 Female Elbow 22mm x 1" female, HLBRFE‐1 Female Elbow 28mm x 1" female, HLBRET‐1 Equal Tee 8mm, HLBRET‐1 Equal Tee 10mm, HLBRET‐1 Equal Tee 15mm, HLBRET‐1 Equal Tee 22mm, HLBRET‐1 Equal Tee 28mm, HLBRET‐1 Equal Tee 35mm, HLBRET‐1 Equal Tee 42mm, HLBRET‐1 Equal Tee 54mm.

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

‘3600xx’ range of brass compression fittings for use with copper pipe (manufactured to EN 1057). The 360014 tank connector, 360013 and 360017 tap connectors all incorporate an EPDM washer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250915009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model: 6-54mm, ¼” - 2” BSP (M) or (F).

Marking:

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD. logo and size on compression nut.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

360003 Compression Straight Connector: 6mm - 54mm, 360004 Compression Reducing Coupler: 10mmx8mm - 28mmx22mm, 360001 Compression Male Coupler: 6mmx1/4" - 54mmx2", 360002 Compression Female Coupler: 6mmx1/4" - 54mmx2", 360013 Compression Straight Tap Connector: 15mmx1/2"- 22mmx3/4", 360014 Compression Tank Connector with Seal: 15mm - 54mm 360015 Compression End Cap Connector: 6mm - 54mm, 360007 Compression Elbow Coupler: 8mm - 54mm, 360016 Compression Elbow Reducing Connector: 22mmx15mm, 360017 Compression Bent Tap Connector: 15mmx1/2"- 22mmx3/4", 360006 Compression Female Elbow Connector: 8mmx1/4" - 54mmx2", 360009 Compression Wall Plate Elbow Coupler: 15mmx1/2" - 22mmx3/4", 360005 Compression Male Elbow Coupler: 8mmx1/4" - 54mmx2", 360008 Compression Equal Tee Coupler: 8mm - 54mm, 360018 Compression Reducing Tee Coupler: 15mmx15mmx22mm - 28mmx28mmx22mm, 360010 Compression Female Tee Coupler: 15mmx15mmx1/2" - 28mmx28mmx1/2".

Approval Holder:

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Company Name

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Address

No.3, Jinhai Road, Bin'gang Industry Zone, Ganjiang Town, Yuhuan, Zhejiang Province, 317610

Country

China

View All Listings by this Company

Manufacturer:

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Company Name

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Address

No.3, Jinhai Road, Bin'gang Industry Zone, Ganjiang Town, Yuhuan, Zhejiang Province, 317610

Country

China

View All Listings by this Company

‘BF’ range of Brass compression fittings for use with copper pipe manufactured to EN1057 Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

250602051

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

South Coast Sales logo on body. EN 1254 and Size on compression Nut.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

BF range comprising of models: BF34821 ¾” Compression x ½” Compression BF34831 1” Compression x 1/2" Compression BF34832 1” Compression x ¾” Compression BF3101 ½” Compression BF3102 ¾” Compression BF3103 1” Compression BF31021 ¾” Compression x ½” Compression BF31032 1” Compression x 1/2" Compression BF31031 1” Compression x ¾” Compression BF3111 ½” BSP (M) x ½” Compression BF31112 ½” BSP (M) x ¾” Compression BF3112 ¾” BSP (M) x ¾” Compression BF31121 ¾” BSP (M) x ½” Compression BF31123 ¾” BSP (M) x 1” Compression BF3113 1” BSP (M) x 1” Compression BF31132 1” BSP (M) x ¾” Compression BF3121 ½” BSP (F) x ½” Compression BF31212 ½” BSP (F) x ¾” Compression BF3122 ¾” BSP (F) x ¾” Compression BF31221 ¾” BSP (F) x ½” Compression BF31223 ¾” BSP (F) x 1” Compression BF3123 1” BSP (F) x 1” Compression BF31232 1” BSP (F) x ¾” Compression BF3141 ½” Compression x 1/2"swivel F BF3271 ½” Compression x 1/2"swivel F BF3151 ½” Compression BF3152 ¾” Compression BF3153 1” Compression BF31521 ¾” Compression x 1/2" Compression BF31532 1" Compression x ¾” Compression BF3161 ½” BSP (M) x ½” Compression BF31612 ½” BSP (M) x ¾” Compression BF3162 ¾” BSP (M) x ¾” Compression BF31621 ¾” BSP (M) x ½” Compression BF31623 ¾” BSP (M) x 1” Compression BF3163 1” BSP (M) x 1” Compression BF31632 1” BSP (M) x ¾” Compression BF3171 ½” BSP (M) x ½” Compression BF31712 ½” BSP (M) x ¾” Compression BF3172 ¾” BSP (M) x ¾” Compression BF31721 ¾” BSP (M) x ½” Compression BF31723 ¾” BSP (M) x 1” Compression BF3173 1” BSP (M) x 1” Compression BF31732 1” BSP (M) x ¾” Compression BF3181 1/2" Compression BF3182 ¾” Compression BF3183 1" Compression BF320222 ¾” BSP (M) x ¾” Compression x ¾” Compression BF320333 1” BSP (M) x 1” Compression x 1” Compression BF318112 1/2" Compression x 1/2" Compression x ¾” Compression BF318211 ¾” Compression x 1/2" Compression x 1/2" Compression BF318212 ¾” Compression x 1/2" Compression x ¾” Compression BF318221 ¾” Compression x ¾” Compression x 1/2" Compression BF318223 ¾” Compression x ¾” Compression x 1" Compression BF318311 1" Compression x 1/2" Compression x 1/2" Compression BF318313 1" Compression x ½” Compression x 1" Compression BF318322 1" Compression x ¾” Compression x ¾” Compression BF318323 1" Compression x ¾” Compression x 1" Compression BF318331 1" Compression x 1" Compression x 1/2" Compression BF318332 1" Compression x 1" Compression x ¾” Compression BF3301 ½” Compression x ½” Compression x ½” BSP (F) BF3302 ¾” Compression x ¾” Compression x ¾” BSP (F) BF330221 ¾” Compression x ¾” Compression x ½” BSP (F) BF3303 1” Compression x 1” Compression x 1” BSP (F) BF330331 1” Compression x 1” Compression x ½” BSP (F) BF330332 1” Compression x 1” Compression x ¾” BSP (F) BF3402 ¾” BSP (M) x F COMPRESSION BF3403 1” BSP (M) x F COMPRESSION BF3211 ½” Compression x ½” BSP (F) BF3212 ¾” Compression x ¾” BSP (F) BF 32112 ¾” Compression x ½” BSP (F) BF3501 ½” Compression BF3502 ¾” Compression BF3503 1” Compression BF3511 ½” Compression BF3512 ¾” Compression BF3513 1" Compression

Approval Holder:

South Coast Sales

Company Name

South Coast Sales

Address

1 Doughcloyne Industrial Estate, Sarsfield Road, Wilton, Cork.

Postcode

T12 TR62

Country

Ireland

Phone

00353 21 - 43 46 143

General Email

info@southcoastsales.com

View All Listings by this Company

‘CFxx’ range of brass or DZR brass compression fittings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperatures: CF15 and CF16 models: 65°C. All other models: 85°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

250915003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Valtech and size on compression nut or body (CF19 and CF20 models only). CR on body of DZR brass fittings.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

CF01 STRAIGHT COUPLINGS: 8mm*8mm, 10mm*10mm, 12mm*12mm, 15mm*15mm, 22mm*22mm, 28mm*28mm, 35mm*35mm, 42mm*42mm, 54mm*54mm. CF01L Repair Coupling: 15mm*15mm*82mm, 22mm*22mm*82mm. CF02 ELBOWS: 8mm*8mm, 10mm*10mm, 12mm*12mm, 15mm*15mm, 22mm*22mm, 28mm*28mm, 35mm*35mm, 42mm*42mm, 54mm*54mm. CF03 REDUCING COUPLING: 10mm*8mm, 12mm*8mm, 12mm*10mm, 15mm*8mm, 15mm*10mm, 15mm*12mm, 16mm*15mm, 22mm*15mm, 22mm*18mm, 28mm*15mm, 28mm*22mm, 35mm*22mm, 35mm*28mm. CF04 REDUCING ELBOWS: 10mm*8mm, 12mm*10mm, 15mm*8mm, 15mm*10mm, 15mm*12mm, 18mm*15mm, 22mm*15mm, 22mm*18mm, 28mm*15mm, 28mm*22mm. CF05 STRAIGHT CONN BSP FI: 8mm*1/4" BSP (F), 8mm*3/8" BSP (F), 10mm*1/4" BSP (F), 10mm*3/8" BSP (F), 10mm*1/2" BSP (F), 12mm*1/4" BSP (F), 12mm*3/8" BSP (F), 12mm*1/2" BSP (F), 15mm*1/4" BSP (F), 15mm*3/8" BSP (F), 15mm*1/2" BSP (F), 15mm*3/4" BSP (F), 15mm*1" BSP (F), 22mm*1/2" BSP (F), 22mm*3/4" BSP (F), 22mm*1" BSP (F), 28mm*3/4" BSP (F), 28mm*1" BSP (F), 35mm*1 1/4" BSP (F), 42mm*1 1/2" BSP (F), 54mm*2" BSP (F). CF06 ELBOWS BSP FI: 8mm*1/4" BSP (F) , 10mm*1/4" BSP (F), 10mm*3/8" BSP (F), 10mm*1/2" BSP (F), 12mm*3/8" BSP (F), 12mm*1/2" BSP (F), 15mm*3/8" BSP (F), 15mm*1/2" BSP (F), 15mm*3/4" BSP (F), 22mm*1/2" BSP (F), 22mm*3/4" BSP (F), 22mm*1" BSP (F), 28mm*1" BSP (F), 35mm*1 1/4" BSP (F), 42mm*1 1/2" BSP (F), 54mm*2" BSP (F). CF07 STRAIGHT CONN BSP MI: 8mm*1/8" BSP (M), 8mm*1/4" BSP (M), 8mm*3/8" BSP (M), 8mm*1/2" BSP (M), 10mm*1/4" BSP (M), 10mm*3/8" BSP (M), 10mm*1/2" BSP (M), 12mm*1/4" BSP (M), 12mm*3/8" BSP (M), 12mm*1/2" BSP (M), 15mm*1/4" BSP (M), 15mm*3/8" BSP (M), 15mm*1/2" BSP (M), 15mm*3/4" BSP (M), 18mm*1/2" BSP (M), 18mm*3/4" BSP (M), 22mm*1/2" BSP (M), 22mm*3/4" BSP (M), 22mm*1" BSP (M), 22mm*1 1/4" BSP (M), 28mm*3/4" BSP (M), 28mm*1" BSP (M), 28mm*1 1/4" BSP (M), 35mm*1 1/4" BSP (M), 35mm*1 1/2" BSP (M), 42mm*1 1/2" BSP (M), 54mm*2" BSP (M). CF08 ELBOWS BSP MI: 8mm*1/4" BSP (M), 8mm*1/2" BSP (M), 10mm*1/4" BSP (M), 10mm*3/8" BSP (M), 10mm*1/2" BSP (M), 12mm*1/4" BSP (M), 12mm*3/8" BSP (M), 12mm*1/2" BSP (M), 15mm*1/4" BSP (M), 15mm*3/8" BSP (M), 15mm*1/2" BSP (M), 15mm*3/4" BSP (M), 22mm*1/2" BSP (M), 22mm*3/4" BSP (M), 22mm*1" BSP (M), 28mm*1" BSP (M), 35mm*1 1/4" BSP (M), 42mm*1 1/2" BSP (M), 54mm*2" BSP (M). CF10 WALL PLATE ELBOW: 15mm*1/2" BSP (F), 22mm*1/2" BSP (F), 22mm*3/4" BSP (F). CF11 EQUAL TEE: 8mm*8mm*8mm, 10mm*10mm*10mm, 12mm*12mm*12mm, 15mm*15mm*15mm, 22mm*22mm*22mm, 28mm*28mm*28mm, 35mm*35mm*35mm, 42mm*42mm*42mm, 54mm*54mm*54mm. CF12 REDUCING TEE: 15mm*15mm*22mm, 22mm*15mm*15mm, 22mm*15mm*22mm, 22mm*22mm*15mm, 22mm*22mm*18mm, 28mm*22mm*15mm, 28mm*15mm*15mm, 28mm*28mm*15mm, 28mm*15mm*28mm, 28mm*22mm*22mm, 22mm*22mm*28mm, 28mm*28mm*22mm, 28mm*22mm*28mm, 35mm*35mm*15mm, 35mm*35mm*22mm, 35mm*35mm*28mm, 42mm*42mm*15mm, 42mm*42mm*22mm, 42mm*42mm*28mm, 42mm*42mm*35mm, 54mm*54mm*15mm, 54mm*54mm*22mm, 54mm*54mm*28mm, 54mm*54mm*35mm, 54mm*54mm*42mm. CF13 BSP (F)TEE CXCXFI: 10mm*10mm*3/8" BSP (F), 12mm*12mm*3/8" BSP (F), 12mm*12mm*1/2" BSP (F), 15mm*15mm*1/4" BSP (F), 15mm*15mm*1/2" BSP (F), 18mm*18mm*3/4" BSP (F), 22mm*22mm*1/2" BSP (F), 22mm*22mm*3/4" BSP (F), 28mm*28mm*1/2" BSP (F), 28mm*28mm*3/4" BSP (F), 28mm*28mm*1" BSP (F). CF14 STOP ENDS: 8mm, 10mm, 12mm, 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm. CF15 STRAIGHT TAP CON: 15mm*1/2" BSP (F), 15mm*3/4" BSP (F), 22mm*3/4" BSP (F). CF16 BENT TAP CONN: 15mm*1/2" BSP (F), 22mm*3/4" BSP (F). CF17 TANK CONNECTORS: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. CF19 Reducing Set: 10mm*8mm, 12mm*8mm, 12mm*10mm, 15mm*8mm, 15mm*10mm, 15mm*12mm, 22mm*15mm, 28mm*15mm, 28mm*22mm, 35mm*15mm, 35mm*22mm, 35mm*28mm, 42mm*15mm, 42mm*22mm, 42mm*28mm, 42mm*35mm, 54mm*15mm, 54mm*22mm, 54mm*28mm, 54mm*35mm, 54mm*42mm. CF20 RED SET ONE PT: 15mm*8mm, 15mm*10mm, 15mm*12mm, 22mm*15mm, 28mm*15mm, 28mm*22mm. CF22 Water Tank Connector: 15mm*1/2" BSP (M), 22mm*3/4" BSP (M), 28mm*1" BSP (M), 35mm*1 1/4" BSP (M), 42mm*1 1/2" BSP (M), 54mm*2" BSP (M). CF23 45 degree elbow: 15mm*15mm, 22mm*22mm, 28mm*28mm. CF24 CROSS: 15mm*15mm*15mm*15mm, 22mm*22mm*22mm*22mm.

Approval Holder:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

Room 610 New Oriental Times Building No. 1130 Biaizhang East Road Ningbo Zhejiang

Country

China

Phone

+86 0574 88001556

View All Listings by this Company

Manufacturer:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

Room 6‐25, 6‐26, New Oriental Time Building, 1130 Baizhang Road, Ningbo, Zhejiang

Country

China

View All Listings by this Company

Range of compression fittings with polypropylene bodies for use with PE100 pipe (manufactured to EN 12201). Some of the female adaptors (55920-9-L, 55920-10-L, 55920-11-L & 55920-11-M), female threaded elbows (56935-10-L, 56935-11-L & 56935-11-M) have a maximum working pressure of 10.0 bar. All other models have a maximum working pressure of 16.0 bar. For above and below ground, cold water use.

Section:

1160 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250902025

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

20mm – 110mm. (please note: 20mm-50mm sizes added January 2026).

Marking:

Plastica Alpha logo, size and date of manufacture (MM/YY) on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Blu Line Plus: 53910-8 Coupling ø63 mm 53910-9 Coupling ø75 mm 53910-10 Coupling ø90 mm 53910-11 Coupling ø110 mm 53915-8 Repair Coupling ø63 mm 53915-9 Repair Coupling ø75 mm 53915-10 Repair Coupling ø90 mm 53915-11 Repair Coupling ø110 mm 53920-8-3 Reducing coupling ø63 - 25 53920-8-4 Reducing coupling ø63 - 32 53920-8-6 Reducing coupling ø63 - 40 53920-8-7 Reducing coupling ø63 - 50 53920-9-6 Reducing coupling ø75 - 40 53920-9-7 Reducing coupling ø75 - 50 53920-9-8 Reducing coupling ø75 - 63 53920-10-8 Reducing coupling ø90 - 63 53920-10-9 Reducing coupling ø90 - 75 53920-11-8 Reducing coupling ø110 - 63 53920-11-9 Reducing coupling ø110 - 75 53920-11-10 Reducing coupling ø110 - 90 55910-8-F Male adaptor ø63 x 1”½ 55910-8-G Male adaptor ø63 x 2” 55910-8-H Male adaptor ø63 x 2”½ 55910-9-G Male adaptor ø75 x 2” 55910-9-H Male adaptor ø75 x 2”½ 55910-9-L Male adaptor ø75 x 3” 55910-10-G Male adaptor ø90 x 2” 55910-10-H Male adaptor ø90 x 2”½ 55910-10-L Male adaptor ø90 x 3” 55910-10-M Male adaptor ø90 x 4” 55910-11-L Male adaptor ø110 x 3” 55910-11-M Male adaptor ø110 x 4” 55920-8-F Female adaptor ø63 x 1” ½ 55920-8-G Female adaptor ø63 x 2” 55920-9-G Female adaptor ø75 x 2” 55920-9-H Female adaptor ø75 x 2” ½ 55920-9-L Female adaptor ø75 x 3” 55920-10-L Female adaptor ø90 x 3” 55920-11-L Female adaptor ø110 x 3” 55920-11-M Female adaptor ø110 x 4” 56950-8 90° elbow ø63 mm 56950-9 90° elbow ø75 mm 56950-10 90° elbow ø90 mm 56950-11 90° elbow ø110 mm 56925-8-F 90° male threaded elbow ø63 x 1” ½ 56925-8-G 90° male threaded elbow ø63 x 2” 56925-8-H 90° male threaded elbow ø63 x 2” ½ 56925-9-G 90° male threaded elbow ø75 x 2” 56925-9-H 90° male threaded elbow ø75 x 2” ½ 56925-10-L 0° male threaded elbow ø90 x 3” 56925-10-M 90° male threaded elbow ø90 x 4” 56925-11-M 90° male threaded elbow ø110 x 4” 56935-8-G 90° female threaded elbow ø63 x 2” 56935-9-G 90° female threaded elbow ø75 x 2” 56935-9-H 90° female threaded elbow ø75 x 2” ½ 56935-10-H 90° female threaded elbow ø90 x 2” ½ 56935-10-L 90° female threaded elbow ø90 x 3” 56935-11-L 90° female threaded elbow ø110 x 3” 56935-11-M 90° female threaded elbow ø110 x 4” 54910-8 90° tee ø63 mm 54910-9 90° tee ø75 mm 54910-10 90° tee ø90 mm 54910-11 90° tee ø110 mm 54920-9-8 90° reducing tee ø54920-9-8 54920-10-9 90° reducing tee ø54920-10-9 54920-11-8 90° reducing tee ø54920-11-8 54920-11-9 90° reducing tee ø54920-11-9 54920-11-10 90° reducing tee ø54920-11-10 54930-8-G 90° male threaded tee ø63 x 2” 54930-8-H 90° male threaded tee ø63 x 2”½ 54930-9-G 90° male threaded tee ø75 x 2” 54930-10-L 90° male threaded tee ø90 x 3” 54930-10-M 90° male threaded tee ø90 x 4” 54930-11-L 90° male threaded tee ø110 x 3” 54930-11-M 90° male threaded tee ø110 x 4” 54940-7-G 90° female threaded tee ø63 x 2” 54940-8-G 90° female threaded tee ø63 x 2”½ 54940-9-G 90° female threaded tee ø75 x 2” 54940-10-L 90° female threaded tee ø90 x 3” 54940-10-M 90° female threaded tee ø90 x 4” 54940-11-L 90° female threaded tee ø110 x 3” 54940-11-M 90° female threaded tee ø110 x 4” 56941-8 End cap ø63 mm 56941-9 End cap ø75 mm 56941-10 End cap ø90 mm 56941-11 End cap ø110 mm 55930-8-G Flanged adaptor ø63 x 2” 55930-9-H Flanged adaptor ø75 x 2”½ 55930-9-L Flanged adaptor ø75 x 3” 55930-10-L Flanged adaptor ø90 x 3” 55930-10-M Flanged adaptor ø90 x 4” 55930-11-M Flanged adaptor ø110 x 4” 56980-8-G 90° Flanged Elbow ø63 x 2” 56980-9-H 90° Flanged Elbow ø75 x 2”½ 56980-9-L 90° Flanged Elbow ø75 x 3” 56980-10-L 90° Flanged Elbow ø90 x 3” 56980-10-M 90° Flanged Elbow ø90 x 4” 56980-11-M 90° Flanged Elbow ø110 x 4” 54930-8-G 90° Flanged Tee ø63 x 2” 54930-9-H 90° Flanged Tee ø75 x 2”½ 54930-9-L 90° Flanged Tee ø75 x 3” 54930-10-L 90° Flanged Tee ø90 x 3” 54930-10-M 90° Flanged Tee ø90 x 4” 54930-11-M 90° Flanged Tee ø110 x 4” Models added January 2026: 53910-2 Coupling ø20 mm 53910-3 Coupling ø25 mm 53910-4 Coupling ø32 mm 53910-6 Coupling ø40 mm 53910-7 Coupling ø50 mm 53915-2 Repair Coupling ø20 mm 53915-3 Repair Coupling ø25 mm 53915-4 Repair Coupling ø32 mm 53915-6 Repair Coupling ø40 mm 53915-7 Repair Coupling ø50 mm 53920-3-2 Reducing coupling ø25 - 20 53920-4-2 Reducing coupling ø32 - 20 53920-4-3 Reducing coupling ø32 - 25 53920-6-4 Reducing coupling ø40 - 32 53920-7-4 Reducing coupling ø50 - 32 53920-7-6 Reducing coupling ø50 - 40 55910-2-B Male adaptor ø20 x ½” 55910-2-C Male adaptor ø20 x ¾” 55910-3-B Male adaptor ø25 x ½” 55910-3-C Male adaptor ø25 x ¾” 55910-3-D Male adaptor ø25 x 1” 55910-4-B Male adaptor ø32 x ½” 55910-4-C Male adaptor ø32 x ¾” 55910-4-D Male adaptor ø32 x 1” 55910-4-E Male adaptor ø32 x 1”¼ 55910-6-D Male adaptor ø40 x 1” 55910-6-E Male adaptor ø40 x 1”¼ 55910-6-F Male adaptor ø40 x 1”½ 55910-7-F Male adaptor ø50 x 1”½ 55910-7-G Male adaptor ø50 x 2” 55920-2-B Female adaptor ø20 x ½” 55920-2-C Female adaptor ø20 x ¾” 55920-3-B Female adaptor ø25 x ½” 55920-3-C Female adaptor ø25 x ¾” 55920-3-D Female adaptor ø25 x 1” 55920-4-C Female adaptor ø32 x ¾” 55920-4-D Female adaptor ø32 x 1” 55920-6-D Female adaptor ø40 x 1” 55920-6-E Female adaptor ø40 x 1” ¼ 55920-6-F Female adaptor ø40 x 1” ½ 55920-7-F Female adaptor ø50 x 1” ½ 55920-7-G Female adaptor ø50 x 2” 56950-2 90° elbow ø20 mm 56950-3 90° elbow ø25 mm 56950-4 90° elbow ø32 mm 56950-6 90° elbow ø40 mm 56950-7 90° elbow ø50 mm 56925-2-B 90° male threaded elbow ø20 x ½” 56925-2-C 90° male threaded elbow ø20 x ¾” 56925-3-B 90° male threaded elbow ø25 x ½” 56925-3-C 90° male threaded elbow ø25 x ¾” 56925-3-D 90° male threaded elbow ø25 x 1” 56925-4-C 90° male threaded elbow ø32 x ¾” 56925-4-D 90° male threaded elbow ø32 x 1” 56925-4-E 90° male threaded elbow ø32 x 1” ¼ 56925-6-D 90° male threaded elbow ø40 x 1” 56925-6-E 90° male threaded elbow ø40 x 1” ¼ 56925-6-F 90° male threaded elbow ø40 x 1” ½ 56925-6-G 90° male threaded elbow ø40 x 2” 56925-7-E 90° male threaded elbow ø50 x 1” ¼ 56925-7-F 90° male threaded elbow ø50 x 1” ½ 56925-7-G 90° male threaded elbow ø50 x 2” 56935-2-B 90° female threaded elbow ø20 x ½” 56935-2-C 90° female threaded elbow ø20 x ¾” 56935-3-B 90° female threaded elbow ø25 x ½” 56935-3-C 90° female threaded elbow ø25 x ¾” 56935-3-D 90° female threaded elbow ø25 x 1” 56935-4-C 90° female threaded elbow ø32 x ¾” 56935-4-D 90° female threaded elbow ø32 x 1” 56935-6-D 90° female threaded elbow ø40 x 1” 56935-6-E 90° female threaded elbow ø40 x 1” ¼ 56935-7-F 90° female threaded elbow ø50 x 1” ½ 56935-7-G 90° female threaded elbow ø50 x 2” 56965-2-B 90° wall plate elbow ø20 x ½” 56965-3-B 90° wall plate elbow ø25 x ½” 56965-3-C 90° wall plate elbow ø25 x ¾” 56965-4-D 90° wall plate elbow ø32 x 1” 54910-2 90° tee ø20 mm 54910-3 90° tee ø25 mm 54910-4 90° tee ø32 mm 54910-6 90° tee ø40 mm 54910-7 90° tee ø50 mm 54920-2-3 90° reducing tee ø54920-2-3 54920-3-2 90° reducing tee ø54920-3-2 54920-4-2 90° reducing tee ø54920-4-2 54920-4-3 90° reducing tee ø54920-4-3 54920-6-3 90° reducing tee ø54920-6-3 54920-6-4 90° reducing tee ø54920-6-4 54920-7-3 90° reducing tee ø54920-7-3 54920-7-4 90° reducing tee ø54920-7-4 54920-7-6 90° reducing tee ø54920-7-6 54920-8-3 90° reducing tee ø54920-8-3 54920-8-4 90° reducing tee ø54920-8-4 54920-8-6 90° reducing tee ø54920-8-6 54920-8-7 90° reducing tee ø54920-8-7 54930-1-C 90° male threaded tee ø16 x ¾” 54930-2-B 90° male threaded tee ø20 x ½” 54930-2-C 90° male threaded tee ø20 x ¾” 54930-3-B 90° male threaded tee ø25 x ½” 54930-3-C 90° male threaded tee ø25 x ¾” 54930-3-D 90° male threaded tee ø25 x 1” 54930-4-C 90° male threaded tee ø32 x ¾” 54930-4-D 90° male threaded tee ø32 x 1” 54930-6-D 90° male threaded tee ø40 x 1” 54930-6-E 90° male threaded tee ø40 x 1”¼ 54930-6-F 90° male threaded tee ø40 x 1”½ 54930-7-F 90° male threaded tee ø50 x 1”½ 54930-7-G 90° male threaded tee ø50 x 2” 54940-2-B 90° female threaded tee ø20 x ½” 54940-2-C 90° female threaded tee ø20 x ¾” 54940-3-B 90° female threaded tee ø25 x ½” 54940-3-C 90° female threaded tee ø25 x ¾” 54940-3-D 90° female threaded tee ø25 x 1” 54940-4-C 90° female threaded tee ø32 x ¾” 54940-4-D 90° female threaded tee ø32 x 1” 54940-6-D 90° female threaded tee ø40 x 1” 54940-6-E 90° female threaded tee ø40 x 1”¼ 54940-6-F 90° female threaded tee ø40 x 1”½ 54940-7-E 90° female threaded tee ø50 x 1”½ 54940-7-F 90° female threaded tee ø50 x 2” 56941-2 End cap ø20 mm 56941-3 End cap ø25 mm 56941-4 End cap ø32 mm 56941-6 End cap ø40 mm 56941-7 End cap ø50 mm 55930-7-G Flanged adaptor ø50 x 2” 56980-7-F 90° Flanged Elbow ø50 x1”½ 56980-7-G 90° Flanged Elbow ø50 x 2” 54980-7-F 90° Flanged Tee ø50 x1”½ 54930-7-G 90° Flanged Tee ø50 x 2”

Manufacturer:

Plastica Alfa S.p.a.

Company Name

Plastica Alfa S.p.a.

Address

C.da S.M. Poggiarelli, Z.I., 95041 Caltagirone (CT), Italy

View All Listings by this Company

‘F17’ range of brass press fittings with EPDM ‘O’-rings for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved via a crimping tool using either a ‘U’, ‘TH’ or ‘H’ profile. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251115001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Equal Straight Union: 16mm - 32mm, Unequal Straight Union: 20mmx16mm - 32mmx26mm, Male Straight Union: 16mmx⅜” BSP (M) - 32mmx1” BSP (M), Female Straight Union: 16mmx⅜” BSP (F) - 32mmx1” BSP (F), Equal Elbows: 16mm - 32mm, Unequal Elbows: 20mmx16mm - 32mmx25mm, Male Elbows: 16mmx⅜” BSP (M) - 32mmx1” BSP (M), Female Elbows: 16mmx⅜ BSP (F) - 32mmx1” BSP (F), Equal Tees: 16mm - 32mm, Unequal Tees: 16mmx20mmx16mm - 32mmx26mmx32mm, Female Tee: 16mmx16mmx⅜” BSP (F) - 32mmx32mmx1” BSP (F), Male tee: 16mmx16mmx⅜” BSP (M) - 25mmx25mmx¾” BSP (M), Wall-plated female elbow: 16mmx⅜” BSP (F) - 26mmx¾” BSP (F), Demountable female straight union: 16mmx⅜ BSP (F) - 32mmx1” BSP (F), End cap: 16mm - 32mm.

Marking:

RIFENG, size, crimp profile (U-TH-H) and production date (MM/YYYY) on crimp sleeve.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

Equal Straight Union (16mm - 32mm): F17-S1216x1216, F17-S1620x1620, F17-S2025x2025, F17-S2026x2026, F17-S2632x2632. Unequal Straight Union (20mmx16mm - 32mmx26mm): F17-S1620x1216, F17-S2025x1216, F17-S2025x1620, F17-S2026x1216, F17-S2026x1620, F17-S2632x1216, F17-S2632x1620, F17-S2632x2025, F17-S2632x2026. Male Straight Union (16mmx⅜” BSP (M) - 32mmx1” BSP (M)): F17-S1216x3/8, F17-S1216x1/2, F17-S1216x3/4, F17-S1620x1/2, F17-S1620x3/4, F17-S1620x1, F17-S2025x3/4, F17-S2025x1, F17-S2026x3/4, F17-S2026x1, F17-S2632x1. Female Straight Union (16mmx⅜” BSP (F) - 32mmx1” BSP (F)): F17-S1216x3/8F, F17-S1216x1/2F, F17-S1216x3/4F, F17-S1620x1/2F, F17-S1620x3/4F, F17-S1620x1F, F17-S2025x3/4F, F17-S2025x1F, F17-S2026x3/4F, F17-S2026x1F, F17-S2632x1F. Equal Elbows (16mm - 32mm): F17-L1216x1216, F17-L1620x1620, F17-L2025x2025, F17-L2026x2026, F17-L2632x2632. Unequal Elbows (20mmx16mm - 32mmx25mm): F17-L1620*1216, F17-L2025*1216, F17-L2025*1620, F17-L2632*2025. Male Elbows (16mmx⅜” BSP (M) - 32mmx1” BSP (M)): F17-L1216x3/8, F17-L1216x1/2, F17-L1216x3/4, F17-L1620x1/2, F17-L1620x3/4, F17-L1620x1, F17-L2025x3/4, F17-L2025x1, F17-L2026x3/4, F17-L2026x1, F17-L2632x1. Female Elbows (16mmx⅜ BSP (F) - 32mmx1” BSP (F)): F17-L1216x3/8F, F17-L1216x1/2F, F17-L1216x3/4F, F17-L1620x1/2F, F17-L1620x3/4F, F17-L2025x3/4F, F17-L2026x3/4F, F17-L2025x1F, F17-L2632x1F. Equal Tees (16mm - 32mm): F17-T1216x1216x1216, F17-T1620x1620x1620, F17-T2025x2025x2025, F17-T2026x2026x2026, F17-T2632x2632x2632. Unequal Tees (16mmx20mmx16mm - 32mmx26mmx32mm): F17-T1216x1620x1216, F17-T1216x2025x1216, F17-T1620x1216x1216, F17-T2025x1216x1216, F17-T2026x1216x1216, F17-T2026x1216x1620, F17-T1620x1216x1620, F17-T1620x1620x1216, F17-T1620x2025x1620, F17-T1620x2026x1620, F17-T2025x1216x2025, F17-T2025x1620x1620, F17-T2025x2025x1620, F17-T2025x1620x2025, F17-T2026x1216x2026, F17-T2026x1620x1620, F17-T2026x1620x2026, F17-T2026x2026x1620, F17-T2632x1216x2632, F17-T2632x1620x2632, F17-T2632x2026x2026, F17-T2632x2025x2632, F17-T2632x2026x2632. Female Tee (16mmx16mmx⅜” BSP (F) - 32mmx32mmx1” BSP (F)): F17-T1216x3/8Fx1216, F17-T1216x1/2Fx1216, F17-T1620x1/2Fx1620, F17-T1620x3/4Fx1620, F17-T2025x1/2Fx2025, F17-T2025x3/4Fx2025, F17-T2026x1/2Fx2026, F17-T2026x3/4Fx2026, F17-T2632x3/4Fx2632, F17-T2632x1Fx2632. Male tee (16mmx16mmx⅜” BSP (M) - 25mmx25mmx¾” BSP (M)): F17-T1216x3/8x1216, F17-T1216x1/2x1216, F17-T1620x1/2x1620, F17-T1620x3/4x1620, F17-T2025x1/2x2025, F17-T2025x3/4x2025. Wall-plated female elbow (16mmx⅜” BSP (F) - 26mmx¾” BSP (F)): F17-L1216x3/8F (Z), F17-L1216x1/2F (Z), F17-L1620x1/2F (Z), F17-L1620x3/4F (Z), F17-L2025x3/4F (Z), F17-L2026x3/4F (Z). Demountable female straight union (16mmx⅜ BSP (F) - 32mmx1” BSP (F)): F17-S1216x3/8F (H), F17-S1216x1/2F (H), F17-S1216x3/4F (H), F17-S1620x1/2F (H), F17-S1620x3/4F (H), F17-S2025x3/4F (H), F17-S2026x3/4F (H), F17-S2632x1F (H). End cap (16mm - 32mm): F17-D1216, F17-D1620, F17-D2025, F17-D2026, F17-D2632.

Approval Holder:

Rifeng Enterprise (Foshan) Co., Ltd.

Company Name

Rifeng Enterprise (Foshan) Co., Ltd.

Address

F1-F14 Building No. 1 Rifeng Road Leping Town Sanshui District Foshan City Guangdong Province

Postcode

528318

Country

China

Phone

+86 757 8203 1672

General Email

lio-lu@rifeng.com

View All Listings by this Company

Manufacturer:

Rifeng Enterprise (Foshan) Co., Ltd.

Company Name

Rifeng Enterprise (Foshan) Co., Ltd.

Address

F1-F14 Building No. 1 Rifeng Road Leping Town Sanshui District Foshan City Guangdong Province

Postcode

528318

Country

China

Phone

+86 757 8203 1672

General Email

lio-lu@rifeng.com

View All Listings by this Company

'PlumbRight' range of push-fit fittings with PEX-b, polysulphone or PPE bodies, supplied with polysulphone inserts. For use with PEX pipe (manufactured to BSEN 7291 part 3), PB (manufactured to BSEN 7291 part 2) and copper pipe (EN1057). Maximum working pressure 12.5 bar @ 20°C. As of October 2025: Maximum working pressure/temperature 3 Bar @ 92°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250602052

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

10mm, 15mm, 22mm, 28mm

Marking:

TLC (TwistLoc logo) and size on body

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

'PlumbRight' range comprising of models: SRDE6764M 15mmX1/2"BSP DROP EAR ELBOW SRF6764M 15mmX1/2"BSP FEMALE ADAPTOR SRF6765M 15mmX3/4"BSP FEMALE ADAPTOR SRF6745M 22mmX3/4"BSP FEMALE ADAPTOR SRF6701M 28mmX1"BSP FEMALE ADAPTOR SPU6711M 10mm STR UNION SPU6766M 15mm STR UNION SPU6744M 22mm STR UNION SPU6700M 28mm STR UNION SPU6761M 15mmX10mm REDUCING STR UNION SPU6746M 22mmX15mm REDUCING STR UNION SRSE6714M 10mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6764M 15mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6765M 15mmX3/4"BSP SWIVEL ELBOW (Hand Tighten) SRSE6714BM 10mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6764BM 15mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6765BM 15mmX3/4"BSP SWIVEL ELBOW (Brass Nut) SPSU6714M 10mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6764M 15mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6765M 15mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6745M 22mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6714BM 10mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6764BM 15mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6765BM 15mmX3/4"BSP SWIVEL UNION (Brass Nut) SPSU6745BM 22mmX3/4"BSP SWIVEL UNION (Brass Nut) SPST671M 10mm END STOP SPST676M 15mm END STOP SPST674M 22mm END STOP SRST670M 28mm END STOP SPE6711M 10mm ELBOW SPE6766M 15mm ELBOW SPE6744M 22mm ELBOW SPE6700M 28mm ELBOW SPE6761M 15mmX10mm REDUCING ELBOW SPE6746M 22mmX15mm REDUCING ELBOW SPATE6766M 15mm-135o STEM ELBOW SPATE6744M 22mm-135o STEM ELBOW SPR6716M 10mmX15mm REDUCER SPR6764M 15mmX22mm REDUCER SPR6760M 15mmX28mm REDUCER SPR6740M 22mmX28mm REDUCER SPT67111M 10mm TEE SPT67666M 15mm TEE SPT67444M 22mm TEE SPT67000M 28mm TEE SPT67611M 15mmX10mmX10mm REDUCING TEE SPT67661M 15mmX15mmX10mm REDUCING TEE SPT67664M 15mmX15mmX22mm REDUCING TEE SPT67466M 22mmX15mmX15mm REDUCING TEE SPT67464M 22mmx15mmx22mm REDUCING TEE SPT67441M 22mmx22mmx10mm REDUCING TEE SPT67446M 22mmX22mmX15mm REDUCING TEE SPT67044M 28mmX22mmX22mm REDUCING TEE SPT67040M 28mmX22mmX28mm REDUCING TEE SPT67001M 28mmX28mmX10mm REDUCING TEE SPT67006M 28mmX28mmX15mm REDUCING TEE SPT67004M 28mmX28mmX22mm REDUCING TEE SPTT67441M 22mX22mmX10mm TUBE TEE SPTT67446M 22mX22mmX15mm TUBE TEE SPTE6711M 10mm TUBE ELBOW SPTE6716M 10mmx15mm TUBE ELBOW SPTE6766M 15mm TUBE ELBOW SPTE6744M 22mm TUBE ELBOW SRMC6764M 15mmX1/2"BSPT MALE CONNECTOR SRME6764M 15mmX1/2"BSPT MALE ELBOW SRFWC6741M 22mmX10mm 4WAY MANIFOLD SRU6766SM 15mm SLIP UNION SRU6744SM 22mm SLIP UNION STS10M 10mm PIPE INSERT STS15M 15mm PIPE INSERT STS22M 22mm PIPE INSERT STS28M 28mm PIPE INSERT SRAV63M 15mm AIR-VENT CONNECTOR

Approval Holder:

City Plumbing

Company Name

City Plumbing

Address

Highbourne House, 1 Eldon Way, Crick, Northamptonshire

Postcode

NN6 7SL

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

View All Listings by this Company

Dual flush, WC outlet valves for either full or reduced flush. Incorporates an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

250902702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2” BSP (M)

Marking:

R&T logo & model body.

Installation Requirements:

R001 R556 R571

Expiry date:

30/09/2030

Model:

A2415L, A2415M & A2706

Manufacturer:

Xiamen R&T Plumbing Technology Co.,Ltd

Company Name

Xiamen R&T Plumbing Technology Co.,Ltd

Address

No.18, Houxiang Road Haicang District Xiamen

Postcode

361022

Country

China

Phone

86-0592-3959422

View All Listings by this Company

Stainless steel plate heat exchangers with copper brazing.

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

0.75 to 2”.

Marking:

UK Exchangers and product info on label.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

UKE-BR030 UKE-BR040 UKE-BR060H UKE-BR050 UKE-BR050R UKE-BR095H BR200L UKE-BR200M UKE-BR205 UKE-BRX12B

Approval Holder:

UK Exchangers Ltd

Company Name

UK Exchangers Ltd

Address

Unit 55 Stilebrook Road Olney

Postcode

MK46 5EA

Country

United Kingdom

General Email

alex@ukeltd.com

View All Listings by this Company

Range of pre-assembled hydraulic blocks incorporating plate heat exchangers, pressure relief valves set at 3.0 bar, circulation pumps and flow regulators. Maximum working pressure: Primary 2.5bar & secondary 10 bar. Maximum operating temperature 80°C (CH) & 60°C (DHW).

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm & 22mm Compression.

Marking:

Bosch, model code and other technical information on adhesive label on assembly.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

8-718-684-683.

Approval Holder:

Bosch Thermotechnology Ltd.

Company Name

Bosch Thermotechnology Ltd.

Address

Danesmoor Works Pilsley Clay Cross Chesterfield Derbyshire

Postcode

S45 9BY

View All Listings by this Company

Manufacturer:

Bosch Thermotechnik GmbH

Company Name

Bosch Thermotechnik GmbH

Address

Sophienstrasse 30 - 32 D-35576 Wetzlar Germany

View All Listings by this Company

Range of floor-standing gas combination boilers, supplied with isolation valves, expansion vessel and a pressure relief valve set at 3.0 bar. Maximum working pressure: Primary circuit 2.5 bar, secondary 10 bar. Maximum operating temperature: Primary 82°C / secondary circuit 60°C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

250904711

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

22mm compression.

Marking:

Worcester on front cover. Worcester and product info on label inside cover.

Installation Requirements:

R001 R140 R360

Expiry date:

30/09/2030

Model:

7-731-600-297 Greenstar 8000F 35kW Combi NG, 7-731-600-298 Greenstar 8000F 35kW Combi LPG, 7-731-600-299 Greenstar 8000F 50kW Combi NG, 7-731-600-300 Greenstar 8000F 50kW Combi LPG.

Approval Holder:

Bosch Thermotechnology Ltd.

Company Name

Bosch Thermotechnology Ltd.

Address

Danesmoor Works Pilsley Clay Cross Chesterfield Derbyshire

Postcode

S45 9BY

View All Listings by this Company

Range of water meters with brass bodies. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature is 50°C or 85°C, please refer to model.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) or 1” BSP (M)

Marking:

APATOR, date of manufacture (YYYY) and product information on face of water meter. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Maximum operating temperature 50°C: JS 1,6-02 JS 1,6-04 JS 1,6-NK JS 1,6-NKP JS 4-02 JS 4-04 JS 4-NK JS 4-NKP JS 2,5-02 JS 2,5-04 JS 2,5-NK JS 2,5-NKP JS 2,5-G1-02 JS 2,5-G1-04 JS 2,5-G1-NK JS 2,5-G1-NKP Maximum operating temperature 85°C: JS90 1,6-02 JS90 1,6-04 JS90 1,6-NK JS901,6-NKP JS90 2,5-02 JS90 2,5-04 JS90 2,5-NK JS90 2,5-NKP JS90 2,5-G1-02 JS90 2,5-G1-04 JS90 2,5-G1-NK JS90 2,5-G1-NKP JS90 4-02 JS90 4-04 JS90 4-NK JS90 4-NKP

Approval Holder:

Pittway Sarl

Company Name

Pittway Sarl

Address

A3 - ZA La Pièce 6 1180 Rolle

Country

Switzerland

View All Listings by this Company

Manufacturer:

Apator Powogaz S.A.

Company Name

Apator Powogaz S.A.

Address

Jaryszki 1C, 62-023 Żerniki

Country

Poland

Phone

+48 789 454 593

View All Listings by this Company

An in-line ultra-sonic water meter with brass (WM15) or plastic (SM15) bodies. Maximum working pressure: 16 Bar. Maximum operating temperature: 50°C (WM15) or 70°C (SM15).

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

Sagemcom, CE, DN, max temperature and other technical information on meter face. Flow arrow on body

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

WM15: available in 110mm, 115mm, 165mm lengths. SM15: available in 110mm length.

Approval Holder:

Sagemcom Energy & Telecom

Company Name

Sagemcom Energy & Telecom

View All Listings by this Company

Range of water meters with plastic bodies and EPDM ‘O’-rings. The inlets incorporate a plastic strainer. Maximum working pressure 10.0 Bar Maximum operating temperature 50.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1¼” BSP M 1½” BSP M

Marking:

Arad on cover. Flow arrow and size on body. Arad and product info on dial face

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

M DN25 1” WITH POLYMER BODY – Inlet thread 1’’ BSP 1¼" BSP Outlet thread 1’’ BSP or 1¼'' BSP M DN32 1¼''” WITH POLYMER BODY - Inlet thread 1¼'' "BSP 1½ " BSP Outlet thread 1¼'' BSP or 1½ " BSP

Manufacturer:

Arad GROUP Ltd.

Company Name

Arad GROUP Ltd.

Address

Kibbutz Dalia 1923900 Kibutzz Dalia

Country

Israel

Phone

+972-4-9897906

View All Listings by this Company

Range of water meters with plastic bodies and plastic turbines. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SJ-SDC plus.

Marking:

NWM, NWM logo, and tech info on dial face. Flow arrow and DN on valve body. NWM & NWM logo on cover.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

½” BSP (M) inlet / ½” BSP (M)outlet (DN15), ¾” BSP (M) inlet / ¾” BSP (M)outlet (DN20), ½” NPT (M) inlet / ½” NPT (M) outlet (DN15), ¾” NPT (M) inlet / ¾” NPT (M) outlet (DN20).

Approval Holder:

Ningbo Water Meter (Group) Co., Ltd

Company Name

Ningbo Water Meter (Group) Co., Ltd

Address

No 355 Hongxing Road Jiangbei District Ningbo

Country

China

View All Listings by this Company

Wall outlet socket with brass body. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) x ¾” BSP (F)

Marking:

VOLA on body

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

Vola 200M

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

View All Listings by this Company

Compact wall outlet elbow with brass body (various finishes). Maximum operating temperature 85.0°C Open outlet use only

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Aqualisa on body

Installation Requirements:

R001 R040

Expiry date:

30/09/2030

Model:

1001359 ** ** Where ** ** denotes the finish and can be replaced with the following: AA = Chrome AD = Matt Black AH = Core Brushed Brass Post 24 (Xenia) AJ = Core Brushed Gunmetal Grey AQ = Aqualisa (Brand)

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of flow sensors incorporating either brass, plastic or stainless steel bodies & EPDM ‘O’-rings. Maximum working pressure 10.0 bar for models VVXA, VVXC, VVXB. Maximum working pressure 16.0 bar for models VVXD & VVXE. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Sika logo, pressure, temperature, other tech info on body; flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

VVXA Vortex Flow Sensor Type VVX15 Vortex Flow Sensor nominal size 15. Body material PPS, G ¾ male or ½” NPT male VVXC Vortex Flow Sensor Type VVX20 Vortex Flow Sensor nominal size 20. Body material PPS G 1 male or ¾” NPT male or Quick-Fasten male/female VVXB Vortex Flow Sensor Type VVX25 Vortex Flow Sensor nominal size 25. Body material PPS G 1¼ male or 1” NPT male VVXD Vortex Flow Sensor Type VVX32 Vortex Flow Sensor nominal size 32. Body material brass or stainless steel G 1½ male or 1½” NPT male VVXE Vortex Flow Sensor Type VVX40 Vortex Flow Sensor nominal size 40. Body material brass or stainless steel G 2 male or 2” NPT male • digit 1,2,3: Designation of the series o VVX >>> VVX series • digit 4: nominal diameter o A >>> DN 15 for type VVX15 o C >>> DN 20 for type VVX20 o B >>> DN 25 for type VVX25 o D >>> DN 32 for type VVX32 o E >>> DN 40 for type VVX40 • digit 5,7,8,9,10,11,12,13,14,15: Device configuration • digit 6: Private label o S >>> SIKA (standard) o E >>> SIKA (standard) with ETL marking • digit 4 and 16: tube material / process connection o A and 4 >>> PPS – G 3/4 male thread o A and C >>> PPS – ½”NPT male thread o C and P >>> PPS – Quick-Fasten connection o C and 7 >>> PPS – G 1 male thread o C and 8 >>> PPS – 3/4" NPT male thread o B and 6 >>> PPS – G 1 1/4 male thread o B and E >>> PPS – 1” NPT male thread o D and U >>> Brass – G 1 1/2 male thread o D and 0 >>> Brass – 1½" NPT male thread o D and M >>> Stainless steel – G 1 1/2 male thread o D and Y >>> Stainless steel – 1½" NPT male thread o E and X >>> Brass – G 2 male thread o E and 9 >>> Brass – 2" NPT male thread o E and O >>> Stainless steel – G 2 male thread o E and Z >>> Stainless steel – 2" NPT male thread

Approval Holder:

SIKA Systemtechnik GmbH

Company Name

SIKA Systemtechnik GmbH

Address

Struthweg 7-9 Kaufungen

Postcode

34260

Country

Germany

Phone

+49 5605 803 652

General Email

grass@sika.net

View All Listings by this Company