Disposal Units

Section Code 0950 :

Back To Directory Sections

WRAS Approval Number: 1606062

Range of free-standing sanitary macerating disposal units. The units are fed via a flexible hose assembly, flow is controlled by a solenoid valve and discharges via a type `AA` air gap. Maximum working pressure 4.0 bar. Maximum operating temperature 40°C.

  • Section: 0950 Disposal Units
  • WRAS Approval Number: 1606062
  • Expiry date: 30/06/2021
  • Note: This appliance incorporates a fluid category 5 backflow prevention device.
  • Size: Flexible hose assembly with ¾” BSP captive nuts
  • Marking: Haigh on handle. Haigh, model name, operating info, serial number on body
  • Installation Requirements R001
  • Model
    Classic+, Panaway & Incomaster
  • Manufacturer: The Haigh Engineering Company Limited
    Company Name
    The Haigh Engineering Company Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707080

Range of compact macerators. Flow is controlled by a solenoid valve incorporating a stainless steel strainer which discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 9.0 bar. Cold water use only.

  • Section: 0950 Disposal Units
  • WRAS Approval Number: 1707080
  • Expiry date: 31/07/2022
  • Note: This appliance incorporates a Fluid Category 5 backflow prevention arrangement. A single check valve is required on the supply to this fitting because it is for a non-wholesome water application so the materials of construction have not been fully assessed against the requirements of the Regulations.
  • Size: PVC coated, TPE lined, flexible hose assembly with ¾” BSP captive nut end connections.
  • Marking: Vernacare on front panel and control panel.
  • Installation Requirements R001 R150 R574
  • Model
    VERNACARE COMPACT MACERATOR 230V (2050ZA001) & VERNACARE COMPACT MACERATOR 110V (2050CA001).
  • Manufacturer: Vernacare Ltd
    Company Name
    Vernacare Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810712

‘Vernacare Vortex’ and ‘Vernacare Vortex Plus’ ranges of hospital macerators with flow controlled by float operated valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 9.0 bar. Cold water supply only.

  • Section: 0950 Disposal Units
  • WRAS Approval Number: 1810712
  • Expiry date: 31/10/2023
  • Size: ½” BSP (M)
  • Marking: Vernacare, model, date of manufacture (DD/MM/YYYY), operating info on front panel. Blue tick label on body.
  • Installation Requirements R001 R280 R520 R574
  • Model
    Vernacare Vortex: 2030ZA001 & 2030CA001. Vernacare Vortex Plus: 2040ZA001 & 2040CA001.
  • Manufacturer: Vernacare Ltd
    Company Name
    Vernacare Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1908802

Free standing sanitary macerating disposal unit with stainless steel diffuser sub assembly. The flow is controlled by solenoid valve and discharges via type a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 0950 Disposal Units
  • WRAS Approval Number: 1908802
  • Expiry date: 30/06/2024
  • Note: This product incorporates a Fluid Category 5 backflow prevention device
  • Size: ¾” BSP (M)
  • Marking: Haigh and model on lid.
  • Installation Requirements R001 R574
  • Model
    Quattro Model added October 2019: Solo dB.
  • Manufacturer: The Haigh Engineering Company Limited
    Company Name
    The Haigh Engineering Company Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907048

Bed pan macerator with flow controlled by solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The product is supplied with a quadruple layered flexible inlet hose consisting of a black coloured TPE inner layer, PVC middle layer, braided PE third layer and white PVC outer layer. Maximum working pressure 8.0 bar. Cold water use only.

  • Section: 0950 Disposal Units
  • WRAS Approval Number: 1907048
  • Expiry date: 31/07/2024
  • Note: This product incorporates a Fluid Category 5 backflow prevention device.
  • Size: ¾” BSP captive nut (to inlet hose).
  • Marking: Haigh Solo on lid.
  • Installation Requirements R001 R009 R574
  • Model
    Solo
  • Manufacturer: The Haigh Engineering Company Limited
    Company Name
    The Haigh Engineering Company Limited
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1911026

Range of free-standing sanitary macerating disposal units with the flow controlled by a solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 9.0 bar. Maximum operating temperature 20ºC.

  • Section: 0950 Disposal Units
  • WRAS Approval Number: 1911026
  • Expiry date: 30/11/2024
  • Size: Polyester lined hose assembly with ¾” BSP captive nuts
  • Marking: Vernacare, Vernacare logo, model number, serial number, date of manufacture and other product info on adhesive label on front of body.
  • Installation Requirements R001 R009 R230 R574
  • Model
    Vernacare Compact Plus Macerator 230-volt, 1 phase product code: 2060ZA001 Vernacare Compact Plus Macerator 220-volt, 1 phase product code: 2060CA001 Vernacare Compact Plus Macerator 110-volt, 1 phase product code: 2061ZA001 Vernacare Compact Plus Macerator 110-volt, 1 phase product code: 2061CA001
  • Manufacturer: Vernacare Ltd
    Company Name
    Vernacare Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006060

Macerator with flow controlled by solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

  • Section: 0950 Disposal Units
  • WRAS Approval Number: 2006060
  • Expiry date: 30/06/2025
  • Size: PVC lined flexible hose assembly with 3/4" BSP captive nut end connections
  • Marking: DDC Dolphin logo & model on body
  • Installation Requirements R001 R574
  • Model
    Puplmatic Eco+
  • Manufacturer: DDC Dolphin Ltd.
    Company Name
    DDC Dolphin Ltd.
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of