Xiamen R&T Plumbing Technology Co. Ltd. Approvals


#1912335

Side entry BS1212-4 (2016) compact type float operated valve for WC flushing cisterns. The inlet incorporates a strainer. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
1912335
Expiry date:
31/12/2024
Note:
Water hardness during the endurance test of (230 ± 20) ppm of calcium carbonate with a supply pressure of 1.5 ± 0.5 Bar.
Size:
½” BSP (M)
Marking:
R&T, model & BS1212-4 on body.
Installation Requirements:
R001 R550
Model:
A1423
Approval Holder:
Xiamen R&T Plumbing Technology Co. Ltd.
Company Name
Xiamen R&T Plumbing Technology Co. Ltd.
Address
No.18, Houxiang Road, Haicang District, XiaMen, China

View All Listings by this Company
Manufacturer:
Xiamen R&T Plumbing Technology Co. Ltd.
Company Name
Xiamen R&T Plumbing Technology Co. Ltd.
Address
No.18, Houxiang Road, Haicang District, XiaMen, China

View All Listings by this Company

Print This Approval


#1912334

Bottom entry BS1212-4 (2016) compact type float operated valves for WC flushing cisterns. The inlet incorporates a strainer, Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
1912334
Expiry date:
31/12/2024
Note:
Water hardness during the endurance test of (230 ± 20) ppm of calcium carbonate with a supply pressure of 1.5 ± 0.5 Bar.
Size:
½” BSP (M)
Marking:
R&T, model & BS1212-4 on body.
Installation Requirements:
R001 R550 R560
Model:
A1370 13½” MODELS ADDED JULY 2020 A1370 11½” A1370 10" CONNECTION ADDED JANUARY 2023 G1/2 and G3/8 Brass connection
Approval Holder:
Xiamen R&T Plumbing Technology Co. Ltd.
Company Name
Xiamen R&T Plumbing Technology Co. Ltd.
Address
No.18, Houxiang Road, Haicang District, XiaMen, China

View All Listings by this Company
Manufacturer:
Xiamen R&T Plumbing Technology Co. Ltd.
Company Name
Xiamen R&T Plumbing Technology Co. Ltd.
Address
No.18, Houxiang Road, Haicang District, XiaMen, China

View All Listings by this Company

Print This Approval


#2011059

Dual flush WC drop valve with an internal overflow. The valve is operated via a lever operated assembly for either full or reduced flush. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2011059
Expiry date:
30/11/2025
Size:
2” BSP (M)
Marking:
Model and R&T on top of valve.
Installation Requirements:
R001
Model:
A24233
Approval Holder:
Xiamen R&T Plumbing Technology Co. Ltd.
Company Name
Xiamen R&T Plumbing Technology Co. Ltd.
Address
No.18, Houxiang Road, Haicang District, XiaMen, China

View All Listings by this Company
Manufacturer:
Xiamen R&T Plumbing Technology Co. Ltd.
Company Name
Xiamen R&T Plumbing Technology Co. Ltd.
Address
No.18, Houxiang Road, Haicang District, XiaMen, China

View All Listings by this Company

Print This Approval


#1912355

Bottom entry BS1212-4 (2016) compact type float operated valves for WC flushing cisterns. The inlet incorporates a strainer, Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
1912355
Expiry date:
31/12/2024
Note:
Water hardness during the endurance test of (230 ± 20) ppm of calcium carbonate with a supply pressure of 1.5 ± 0.5 Bar.
Size:
½” BSP (M)
Marking:
R&T, WRAS, model & BS1212-4 on body.
Installation Requirements:
R001 R550 R560
Model:
CI.742.13 - 13½” CI.742 - 11½” CI.742.10 - 10"
Approval Holder:
ARMERA LIMITED
Company Name
ARMERA LIMITED
Postcode
BA2 4QE

View All Listings by this Company
Manufacturer:
Xiamen R&T Plumbing Technology Co. Ltd.
Company Name
Xiamen R&T Plumbing Technology Co. Ltd.
Address
No.18, Houxiang Road, Haicang District, XiaMen, China

View All Listings by this Company

Print This Approval


#2011016

Dual flush, WC outlet valves. Model A2706 is operated via a push button assembly for either full or reduced flush. Models A2415L & A2415M are not supplied with a operating button. Maximum operating temperature. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2011016
Expiry date:
30/11/2025
Size:
2” BSP (M)
Marking:
R&T, model name, WRAS logo and date of manufacture (YY/MM) on body.
Installation Requirements:
R001
Model:
A2415L, A2415M & A2706
Approval Holder:
Xiamen R&T Plumbing Technology Co. Ltd.
Company Name
Xiamen R&T Plumbing Technology Co. Ltd.
Address
No.18, Houxiang Road, Haicang District, XiaMen, China

View All Listings by this Company
Manufacturer:
Xiamen R&T Plumbing Technology Co. Ltd.
Company Name
Xiamen R&T Plumbing Technology Co. Ltd.
Address
No.18, Houxiang Road, Haicang District, XiaMen, China

View All Listings by this Company

Print This Approval


#2107105

Range of WC dual flush drop valves comprising of a plastic body, silicone seal and an internal overflow. The valve is operated via a push button or lever assembly for either full or reduced flush. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2107105
Expiry date:
31/07/2026
Note:
Open outlet use only.
Size:
2” BSP (M)
Marking:
Kohler and model number on valve body
Installation Requirements:
R001 R571
Model:
1190056 dual flush valve with any of the following actuators: 1278504-XX, 1367704-XX, 1215521-XX or 1199720-XX. 1409397 dual flush valve with 1409402-XX actuator. XX denotes the finish on the actuator, e.g. CP (chrome plating).
Approval Holder:
Kohler (Thailand) Public Company Limited
Company Name
Kohler (Thailand) Public Company Limited
Address
16TH FLOOR JASMINE CITY BUILDING 2 SOI SUKHUMVIT 23.

View All Listings by this Company
Manufacturer:
Xiamen R&T Plumbing Technology Co. Ltd.
Company Name
Xiamen R&T Plumbing Technology Co. Ltd.
Address
No.18, Houxiang Road, Haicang District, XiaMen, China

View All Listings by this Company

Print This Approval


#2206009

Range of dual flush WC outlet valves, incorporating ABS body, silicone seal & internal overflow. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2206009
Expiry date:
30/06/2027
Note:
Operating button not supplied.
Size:
61 mm Diameter connection
Marking:
R&T and Model number on body
Installation Requirements:
R001 R571 R581
Model:
A2606M & A2606L
Approval Holder:
Xiamen R&T Plumbing Technology Co. Ltd.
Company Name
Xiamen R&T Plumbing Technology Co. Ltd.
Address
No.18, Houxiang Road, Haicang District, XiaMen, China

View All Listings by this Company
Manufacturer:
Xiamen R&T Plumbing Technology Co. Ltd.
Company Name
Xiamen R&T Plumbing Technology Co. Ltd.
Address
No.18, Houxiang Road, Haicang District, XiaMen, China

View All Listings by this Company

Print This Approval


#2302701

Dual flush WC outlet valve incorporating an ABS body and EPDM seals. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2302701
Expiry date:
29/02/2028
Size:
2” BSP (M) outlet.
Marking:
R&T on valve body
Installation Requirements:
R001 R571 R581
Model:
A2412
Approval Holder:
Xiamen R&T Plumbing Technology Co. Ltd.
Company Name
Xiamen R&T Plumbing Technology Co. Ltd.
Address
No.18, Houxiang Road, Haicang District, XiaMen, China

View All Listings by this Company
Manufacturer:
Xiamen R&T Plumbing Technology Co. Ltd.
Company Name
Xiamen R&T Plumbing Technology Co. Ltd.
Address
No.18, Houxiang Road, Haicang District, XiaMen, China

View All Listings by this Company

Print This Approval


#2401712

WC dual flush drop valve with ABS body and silicone seals. The valve is operated via a two push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2401712
Expiry date:
31/01/2029
Size:
2” BSP (M)
Marking:
R & T on body.
Installation Requirements:
R001 R571 R581
Model:
A2471
Approval Holder:
Xiamen R&T Plumbing Technology Co. Ltd.
Company Name
Xiamen R&T Plumbing Technology Co. Ltd.
Address
No.18, Houxiang Road, Haicang District, XiaMen, China

View All Listings by this Company
Manufacturer:
Xiamen R&T Plumbing Technology Co. Ltd.
Company Name
Xiamen R&T Plumbing Technology Co. Ltd.
Address
No.18, Houxiang Road, Haicang District, XiaMen, China

View All Listings by this Company

Print This Approval


#240202704

Dual flush WC outlet valve comprising of plastic body, silicone seal and an internal overflow. Valve is operated via a dual push button for either full or reduced flush. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
240202704
Expiry date:
28/02/2029
Size:
2” BSP (M) outlet.
Marking:
R&T logo and model on body.
Installation Requirements:
R001 R571 R581
Model:
A2438
Approval Holder:
Xiamen R&T Plumbing Technology Co. Ltd.
Company Name
Xiamen R&T Plumbing Technology Co. Ltd.
Address
No.18, Houxiang Road, Haicang District, XiaMen, China

View All Listings by this Company
Manufacturer:
Xiamen R&T Plumbing Technology Co. Ltd.
Company Name
Xiamen R&T Plumbing Technology Co. Ltd.
Address
No.18, Houxiang Road, Haicang District, XiaMen, China

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.