Section:

0550 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a swivel spout.

Deck mounted. Capable of achieving an AUK3 Tap Gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Notes & Further Information

Various finish： (1) Without suffix to current model number: Chrome plated (2) With suffix B: Black (3) With suffix BB: Brushed brass

Product Images

Approval Holder:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturers:

Taizhou Shenglang Sanitary Ware Co, Ltd.

Section:

0570 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a double outlet and a swivel spout.

Deck mounted Capable of achieving AUK 3 Tap Gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006

Expiry date:

31/10/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Section:

0650 Combination Tap Assemblies

Description:

A Range of Three hole tap(s) with a single outlet and a fixed spout.

Wall Mounted Concealed. Undefinable Air Gap – See IRN’s.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2030

Notes & Further Information

*denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black

Product Images

Approval Holder:

WINSDRUM Technology (Foshan) Co., Ltd

Company Name

WINSDRUM Technology (Foshan) Co., Ltd

Address

Room 804-805, Flat 2, Jiabang Guojin Center, No.1 Shilong South Road, Guicheng Street, Nanhai District, Foshan City, Guangdong Province

Country

China

View All Listings by this Company

Section:

0650 Combination Tap Assemblies

Description:

A Range of Three hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Stainless-steel braided EPDM lined flexible connection hoses Capable of Achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Notes & Further Information

Product Images

Approval Holder:

In Compliance GmbH

Company Name

In Compliance GmbH

Address

Kathe-Kollwitz-Ring 5a Unna

Postcode

59423

Country

Germany

General Email

jutta.emge-degenhardt@in-compliance.de

View All Listings by this Company

Section:

0650 Combination Tap Assemblies

Description:

A Range of Three hole tap(s) with a single outlet and a fixed spout.

Wall Mounted Undefinable Air Gap - See IRN's Product requires a manifold which is not supplied as part of this approval.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

31/10/2030

Notes & Further Information

Where xxx denotes finish, can be replaced by: 002 – Chrome DC2 – Supersteel DA2 – Warm sunset AL2 – Brushed hard graphite A02 – hard graphit DL2 – brushed warm sunset GN2 – brushed cool sunrise A02 – hard graphite MS2 – satin steel GL2 – cool sunrise MS2 – satin graphite

Product Images

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Manufacturers:

Grohe AG

Filling loop assembly consisting of an in-line isolation valve, an in-line double check valve assembly (suitable for back flow protection against fluid category 3) that incorporates an isolation valve and a stainless-steel braided EPDM lined hose. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1015 Filling Loop

Size:

15mm compression

Marking:

Altecnic logo, flow arrow and CR on valve. Altecnic, WRAS and date of manufacture (YYYY) on hose.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

FL015 - 15nb CORE Filling Loop.

Approval Holder:

Smith Brothers Stores Limited

Company Name

Smith Brothers Stores Limited

Address

Unit V2 Winchester Avenue, Blaby, Leicester

Postcode

LE8 4GZ

View All Listings by this Company

Manufacturer:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

View All Listings by this Company

‘LSMRI’ range of copper-nickel press fittings (‘M’ type crimp profile) for use with copper-nickel ‘LSMRI’ pipe. Above ground use only. Maximum working pressures: Press fittings: 16.0 bar, LSMRI-PN6 Series flange: 6.0 bar, LSMRI-PN10/16 Series flange: 10/16 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250912039

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm - 108mm.

Marking:

Fittings: LSMRI, product name, size, CuNi10Fe1.6Mn, PN16, PN6 or PN10/16 on body. Pipe: LSMRI, Size, CuNi10Fe1.6Mn.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

LSMRI-Pipe-15, LSMRI-Pipe-22, LSMRI-Pipe-28, LSMRI-Pipe-35, LSMRI-Pipe-42, LSMRI-Pipe-54, LSMRI-Pipe-76.1, LSMRI-Pipe-88.9, LSMRI-Pipe-108, LSMRI-90°A Elbow-15, LSMRI-90°A Elbow-22, LSMRI-90°A Elbow-28, LSMRI-90°A Elbow-35, LSMRI-90°A Elbow-42, LSMRI-90°A Elbow-54, LSMRI-90°A Elbow-76.1, LSMRI-90°A Elbow-88.9, LSMRI-90°A Elbow-108, LSMRI-90°B Elbow-15, LSMRI-90°B Elbow-22, LSMRI-90°B Elbow-28, LSMRI-90°B Elbow-35, LSMRI-90°B Elbow-42, LSMRI-90°B Elbow-54, LSMRI-90°B Elbow-76.1, LSMRI-90°B Elbow-88.9, LSMRI-90°B Elbow-108, LSMRI-60°A Elbow-15, LSMRI-60°A Elbow-22, LSMRI-60°A Elbow-28, LSMRI-60°A Elbow-35, LSMRI-60°A Elbow-42, LSMRI-60°A Elbow-54, LSMRI-60°A Elbow-76.1, LSMRI-60°A Elbow-88.9, LSMRI-60°A Elbow-108, LSMRI-60°B Elbow-15, LSMRI-60°B Elbow-22, LSMRI-60°B Elbow-28, LSMRI-60°B Elbow-35, LSMRI-60°B Elbow-42, LSMRI-60°B Elbow-54, LSMRI-60°B Elbow-76.1, LSMRI-60°B Elbow-88.9, LSMRI-60°B Elbow-108, LSMRI-45°A Elbow-15, LSMRI-45°A Elbow-22, LSMRI-45°A Elbow-28, LSMRI-45°A Elbow-35, LSMRI-45°A Elbow-42, LSMRI-45°A Elbow-54, LSMRI-45°A Elbow-76.1, LSMRI-45°A Elbow-88.9, LSMRI-45°A Elbow-108, LSMRI-45°B Elbow-15, LSMRI-45°B Elbow-22, LSMRI-45°B Elbow-28, LSMRI-45°B Elbow-35, LSMRI-45°B Elbow-42, LSMRI-45°B Elbow-54, LSMRI-45°B Elbow-76.1, LSMRI-45°B Elbow-88.9, LSMRI-45°B Elbow-108, LSMRI-30°A Elbow-15, LSMRI-30°A Elbow-22, LSMRI-30°A Elbow-28, LSMRI-30°A Elbow-35, LSMRI-30°A Elbow-42, LSMRI-30°A Elbow-54, LSMRI-30°A Elbow-76.1, LSMRI-30°A Elbow-88.9, LSMRI-30°A Elbow-108, LSMRI-30°B Elbow-15, LSMRI-30°B Elbow-22, LSMRI-30°B Elbow-28, LSMRI-30°B Elbow-35, LSMRI-30°B Elbow-42, LSMRI-30°B Elbow-54, LSMRI-30°B Elbow-76.1, LSMRI-30°B Elbow-88.9, LSMRI-30°B Elbow-108, LSMRI-15°A Elbow-15, LSMRI-15°A Elbow-22, LSMRI-15°A Elbow-28, LSMRI-15°A Elbow-35, LSMRI-15°A Elbow-42, LSMRI-15°A Elbow-54, LSMRI-15°A Elbow-76.1, LSMRI-15°A Elbow-88.9, LSMRI-15°A Elbow-108, LSMRI-15°B Elbow-15, LSMRI-15°B Elbow-22, LSMRI-15°B Elbow-28, LSMRI-15°B Elbow-35, LSMRI-15°B Elbow-42, LSMRI-15°B Elbow-54, LSMRI-15°B Elbow-76.1, LSMRI-15°B Elbow-88.9, LSMRI-15°B Elbow-108, LSMRI-Equal Tee-15, LSMRI-Equal Tee-18, LSMRI-Equal Tee-22, LSMRI-Equal Tee-28, LSMRI-Equal Tee-35, LSMRI-Equal Tee-42, LSMRI-Equal Tee-54, LSMRI-Equal Tee-76.1, LSMRI-Equal Tee-88.9, LSMRI-Equal Tee-108, LSMRI-Reduce Tee-22X15, LSMRI-Reduce Tee-28X15, LSMRI-Reduce Tee-28X22, LSMRI-Reduce Tee-35X15, LSMRI-Reduce Tee-35X22, LSMRI-Reduce Tee-35X28, LSMRI-Reduce Tee-42X22, LSMRI-Reduce Tee-42X28, LSMRI-Reduce Tee-42X35, LSMRI-Reduce Tee-54X22, LSMRI-Reduce Tee-54X28, LSMRI-Reduce Tee-54X35, LSMRI-Reduce Tee-54X42, LSMRI-Reduce Tee-76.1X22, LSMRI-Reduce Tee-76.1X28, LSMRI-Reduce Tee-76.1X35, LSMRI-Reduce Tee-76.1X42, LSMRI-Reduce Tee-76.1X54, LSMRI-Reduce Tee-88.9X22, LSMRI-Reduce Tee-88.9X28, LSMRI-Reduce Tee-88.9X35, LSMRI-Reduce Tee-88.9X42, LSMRI-Reduce Tee-88.9X54, LSMRI-Reduce Tee-88.9X76.1, LSMRI-Reduce Tee-108X22, LSMRI-Reduce Tee-108X28, LSMRI-Reduce Tee-108X35, LSMRI-Reduce Tee-108X42, LSMRI-Reduce Tee-108X54, LSMRI-Reduce Tee-108X76.1, LSMRI-Reduce Tee-108X88.9, LSMRI-Reducer-22X15, LSMRI-Reducer-28X15, LSMRI-Reducer-28X18, LSMRI-Reducer-28X22, LSMRI-Reducer-35X22, LSMRI-Reducer-35X28, LSMRI-Reducer-42X28, LSMRI-Reducer-42X35, LSMRI-Reducer-54X28, LSMRI-Reducer-54X35, LSMRI-Reducer-54X42, LSMRI-Reducer-76.1X42, LSMRI-Reducer-76.1X54, LSMRI-Reducer-88.9X22, LSMRI-Reducer-88.9X54, LSMRI-Reducer-88.9X76.1, LSMRI-Reducer-108X22, LSMRI-Reducer-108X54, LSMRI-Reducer-108X76.1, LSMRI-Reducer-108X88.9, LSMRI-Sleeve-15, LSMRI-Sleeve-22, LSMRI-Sleeve-28, LSMRI-Sleeve-35, LSMRI-Sleeve-42, LSMRI-Sleeve-54, LSMRI-Sleeve-76.1, LSMRI-Sleeve-88.9, LSMRI-Sleeve-108, LSMRI-Slip Sleeve-15, LSMRI-Slip Sleeve-22, LSMRI-Slip Sleeve-28, LSMRI-Slip Sleeve-35, LSMRI-Slip Sleeve-42, LSMRI-Slip Sleeve-54, LSMRI-Slip Sleeve-76.1, LSMRI-Slip Sleeve-88.9, LSMRI-Slip Sleeve-108, LSMRI-Sleeve with 1 thread female end-15XR1/2", LSMRI-Sleeve with 1 thread female end-22XR3/4", LSMRI-Sleeve with 1 thread female end-28XR1", LSMRI-Sleeve with 1 thread female end-35XR1 1/4", LSMRI-Sleeve with 1 thread female end-42XR1 1/2", LSMRI-Sleeve with 1 thread female end-54XR2", LSMRI-Sleeve with 1 thread female end-76.1XR2 1/2", LSMRI-Sleeve with 1 thread female end-88.9XR3", LSMRI-Sleeve with 1 thread female end-108XR4", LSMRI-Sleeve with 1 thread male end-15XR1/2", LSMRI-Sleeve with 1 thread male end-22XR3/4", LSMRI-Sleeve with 1 thread male end-28XR1", LSMRI-Sleeve with 1 thread male end-35XR1 1/4", LSMRI-Sleeve with 1 thread male end-42XR1 1/2", LSMRI-Sleeve with 1 thread male end-54XR2", LSMRI-Sleeve with 1 thread male end-76.1XR2 1/2", LSMRI-Sleeve with 1 thread male end-88.9XR3", LSMRI-Sleeve with 1 thread male end-108XR4", LSMRI-PN6 FLANGED SLEEVE-15, LSMRI-PN6 FLANGED SLEEVE-22, LSMRI-PN6 FLANGED SLEEVE-28, LSMRI-PN6 FLANGED SLEEVE-35, LSMRI-PN6 FLANGED SLEEVE-42, LSMRI-PN6 FLANGED SLEEVE-54, LSMRI-PN6 FLANGED SLEEVE-76.1, LSMRI-PN6 FLANGED SLEEVE-88.9, LSMRI-PN6 FLANGED SLEEVE-108, LSMRI-PN10/16 FLANGED SLEEVE-15, LSMRI-PN10/16 FLANGED SLEEVE-28, LSMRI-PN10/16 FLANGED SLEEVE-35, LSMRI-PN10/16 FLANGED SLEEVE-42, LSMRI-PN10/16 FLANGED SLEEVE-54, LSMRI-PN10/16 FLANGED SLEEVE-76.1, LSMRI-PN10/16 FLANGED SLEEVE-88.9, LSMRI-PN10/16 FLANGED SLEEVE-108, LSMRI-PN6 Inner pieces for flanges-15, LSMRI-PN6 Inner pieces for flanges-22, LSMRI-PN6 Inner pieces for flanges-28, LSMRI-PN6 Inner pieces for flanges-35, LSMRI-PN6 Inner pieces for flanges-42, LSMRI-PN6 Inner pieces for flanges-54, LSMRI-PN6 Inner pieces for flanges-76.1, LSMRI-PN6 Inner pieces for flanges-88.9, LSMRI-PN6 Inner pieces for flanges-108, LSMRI-PN10/16 Inner pieces for flanges-15, LSMRI-PN10/16 Inner pieces for flanges-22, LSMRI-PN10/16 Inner pieces for flanges-28, LSMRI-PN10/16 Inner pieces for flanges-35, LSMRI-PN10/16 Inner pieces for flanges-42, LSMRI-PN10/16 Inner pieces for flanges-54, LSMRI-PN10/16 Inner pieces for flanges-76.1, LSMRI-PN10/16 Inner pieces for flanges-88.9, LSMRI-PN10/16 Inner pieces for flanges-108, LSMRI-Penetration With Sleeve-15, LSMRI-Penetration With Sleeve-22, LSMRI-Penetration With Sleeve-28, LSMRI-Penetration With Sleeve-35, LSMRI-Penetration With Sleeve-42, LSMRI-Penetration With Sleeve-54, LSMRI-Penetration With Sleeve-76.1, LSMRI-Penetration With Sleeve-88.9, LSMRI-Penetration With Sleeve-108, LSMRI-Tee with 1 female thread end-15XR1/2", LSMRI-Tee with 1 female thread end-22XR1/2", LSMRI-Tee with 1 female thread end-28XR1/2", LSMRI-Tee with 1 female thread end-35XR1/2", LSMRI-Tee with 1 female thread end-42XR1/2", LSMRI-Tee with 1 female thread end-54XR1/2", LSMRI-Tee with 1 female thread end-22XR3/4", LSMRI-Tee with 1 female thread end-28XR3/4", LSMRI-Tee with 1 female thread end-35XR3/4", LSMRI-Tee with 1 female thread end-42XR3/4", LSMRI-Tee with 1 female thread end-54XR3/4", LSMRI-Tee with 1 female thread end-76.1XR3/4", LSMRI-Tee with 1 female thread end-88.9XR3/4", LSMRI-Tee with 1 female thread end-108XR3/4", LSMRI-Tee with 1 female thread end-28XR1", LSMRI-Tee with 1 female thread end-35XR1 1/4", LSMRI-Tee with 1 female thread end-42XR1 1/2", LSMRI-Tee with 1 female thread end-54XR2", LSMRI-Tee with 1 female thread end-108XR2", LSMRI-Female thread end connector with union-15XR1/2", LSMRI-Female thread end connector with union-22XR3/4", LSMRI-Female thread end connector with union-28XR1", LSMRI-Female thread end connector with union-35XR1 1/4", LSMRI-Female thread end connector with union-42XR1 1/2", LSMRI-Female thread end connector with union-54XR2", LSMRI-Male thread end connector with union-15XR1/2", LSMRI-Male thread end connector with union-22XR3/4", LSMRI-Male thread end connector with union-28XR1", LSMRI-Male thread end connector with union-35XR1 1/4", LSMRI-Male thread end connector with union-42XR1 1/2", LSMRI-Male thread end connector with union-54XR2".

Product Images

Approval Holder:

Luoyang Ship Material Research Institute

Company Name

Luoyang Ship Material Research Institute

Address

No.169,South Binhe Road, Luolong District, Luoyang City, Henan Province

Country

China

View All Listings by this Company

Range of Socket weld, Click weld, Butt weld and Electro fusion fittings (see models), for use with ABN//INSTAL CT Faser RD Series 3.2 / SDR 7.4 & ABN//INSTAL CT Faser RD Series 5 / SDR 11 pipe. Maximum working pressure; (see models) Maximum operating temperature; (see models)

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251002034

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Polypipe, ABN and size on fitting body. Polypipe, ABN, size, material, series, date of manufacture (DD/MM/YYYY), and DIN8078-2008-09 on the pipe.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

3000.3.Ø.40G - MecFlow Fusion Pipe Plain End Pipe – Series 3, 4m Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C 3000.5.Ø.40G - MecFlow Fusion Pipe Plain End Pipe – Series 5, 4m Ø40-110mm 20.3bar Cold Water Use 8.1bar @ 80°C 3000.5.Ø.58G - MecFlow Fusion Pipe Plain End Pipe – Series 5, 5.8m Ø125-200mm 20.3bar Cold Water Use 8.1bar @ 80°C Ø200-315mm 20.3bar Cold Water Use Only 3011S.ØG - MecFlow Fusion Double Socket Double Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C 3004S.Ø.90G - MecFlow Fusion Equal Tee 90° Triple Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C 3004S.ØXØXØ.90G - MecFlow Fusion Unequal Tee 90° Triple Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-110mm 20.3bar Cold Water Use 8.1bar @ 80°C 3001S.Ø.90G - MecFlow Fusion Elbow 90° Double Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C 3001S.Ø.45G - MecFlow Fusion Elbow 45° Double Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C 3024S.ØXØG - MecFlow Fusion Reducer Spigot / Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C 3030S.ØG - MecFlow Fusion End Cap Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C 3080S.ØG - MecFlow Fusion Stub Flange Socket Fitting Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C 3016S.32X075.90G - MecFlow Fusion Threaded Adaptor – 90° Female Socket / BSP Thread Fitting Ø32mm x ¾” BSP 31.7bar Cold Water Use 8.1bar @ 80°C 3016S.32X190G - MecFlow Fusion Threaded Adaptor – 90° Female Hexagon Socket / BSP Thread Fitting Ø32mm x 1” BSP 31.7bar Cold Water Use 8.1bar @ 80°C 3017S.32X075.90G - MecFlow Fusion Threaded Adaptor – 90° Male Socket / BSP Thread Fitting Ø32mm x ¾” BSP 31.7bar Cold Water Use 8.1bar @ 80°C 3017S.32X1.90G - MecFlow Fusion Threaded Adaptor – 90° Male Hexagon Socket / BSP Thread Fitting Ø32mm x 1” BSP 31.7bar Cold Water Use 8.1bar @ 80°C 3016S.ØXØG - MecFlow Fusion Threaded Adaptor – Female Socket / BSP Thread Fitting Ø20-32mm x ½-¾” BSP 31.7bar Cold Water Use 8.1bar @ 80°C 3016S.ØXØG - MecFlow Fusion Threaded Adaptor – Female Hexagon Socket / BSP Thread Fitting Ø32mm x 1” 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-110mm x 1¼-4” 20.3barCold Water Use 8.1bar @ 80°C 3017S.ØXØG - MecFlow Fusion Threaded Adaptor –Male Socket / BSP Thread Fitting Ø20-32mm x ½-¾” BSP 31.7bar Cold Water Use 8.1bar @ 80°C 3017S.ØXØG - MecFlow Fusion Threaded Adaptor – Male Hexagon Socket / BSP Thread Fitting Ø32mm x 1” 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-110mm x 1¼-4” 20.3bar Cold Water Use 8.1bar @ 80°C 3019S.32XØG - MecFlow Fusion Threaded Adaptor – Female Socket / BSP Thread Fitting Ø32mm x 1-1¼” 31.7bar Cold Water Use 8.1bar @ 80°C 3057S.ØXØG - MecFlow Fusion Threaded Adaptor Male Socket / BSP Thread Fitting Ø20-32mm x ½”-1” 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-110mm x 1¼”-4” 20.3bar Cold Water Use 8.1bar @ 80°C 3058S.ØXØG - MecFlow Fusion Threaded Adaptor Female Socket / BSP Thread Fitting Ø20-32mm x ½”-1” 31.7bar Cold Water Use 8.1bar @80°C Ø40-110mm x 1¼”-4” 20.3bar Cold Water Use 8.1bar @ 80°C 3010.ØG - MecFlow Fusion Electrofusion Coupler Double Electrofusion Socket Fitting Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø40-125mm 20.3bar Cold Water Use 8.1bar @ 80°C Ø160mm 20.3bar Cold Water Use Only 3054.ØXØG - MecFlow Fusion Saddle Male Saddle / Socket Fitting Ø50-200mm X Ø20-32mm 31.7bar Cold Water Use 8.1bar @ 80°C Ø90-200mm X Ø40-63mm 8.1bar @ 80°C Ø200-315mm X Ø40-63mm 20.3bar Cold Water Use Only 3030B.5.ØG - MecFlow Fusion End Cap Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use 3024B.5.ØXØG - MecFlow Fusion Reducer Spigot / Socket Fitting Ø160-315mm 20.3bar Cold Water Use 3080B.5.ØG - MecFlow Fusion Stub Flange Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use 3004B.5.ØXØXØ.90G MecFlow Fusion 90° Unequal Tee Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use 3004B.5.Ø.90G MecFlow Fusion 90° Equal Tee Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use 3001B.5.Ø.45G MecFlow Fusion Elbow 45° Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use 3001B.5.Ø.90G MecFlow Fusion Elbow 90° Socket Fitting (Butt Weld) Ø160-315mm 20.3bar Cold Water Use 3011ES.ØG - MecFlow Fusion Coupler - Clickweld Socket / Electrofusion Spigot Fitting Ø50-160mm 20.3bar Cold Water Use Only 3011ES.ØG - MecFlow Fusion Socket Connector – Clickweld Socket / Electrofusion Socket Fitting Ø50-125mm 20.3bar Cold Water Use Only 3010ES.ØG - MecFlow Fusion Socket Connector – Clickweld Socket / Electrofusion Spigot Fitting Ø50-125mm 20.3bar Cold Water Use Only 3009EM.ØG MecFlow Fusion – Clickweld Transition Socket / Electrofusion Spigot Fitting Ø50-125mm 20.3bar Cold Water Use Only

Approval Holder:

Polypipe Building Services

Company Name

Polypipe Building Services

Address

New Hythe Business Park, College Road, Aylesford, Kent

Postcode

ME20 7PJ

View All Listings by this Company

'PlumbRight' range of push-fit fittings with PEX-b, polysulphone or PPE bodies, supplied with polysulphone inserts. For use with PEX pipe (manufactured to BSEN 7291 part 3), PB (manufactured to BSEN 7291 part 2) and copper pipe. Maximum working pressure 12.5 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250602052

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

10mm, 15mm, 22mm, 28mm

Marking:

TLC (TwistLoc logo) and size on body

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

'PlumbRight' range comprising of models: SRDE6764M 15mmX1/2"BSP DROP EAR ELBOW SRF6764M 15mmX1/2"BSP FEMALE ADAPTOR SRF6765M 15mmX3/4"BSP FEMALE ADAPTOR SRF6745M 22mmX3/4"BSP FEMALE ADAPTOR SRF6701M 28mmX1"BSP FEMALE ADAPTOR SPU6711M 10mm STR UNION SPU6766M 15mm STR UNION SPU6744M 22mm STR UNION SPU6700M 28mm STR UNION SPU6761M 15mmX10mm REDUCING STR UNION SPU6746M 22mmX15mm REDUCING STR UNION SRSE6714M 10mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6764M 15mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6765M 15mmX3/4"BSP SWIVEL ELBOW (Hand Tighten) SRSE6714BM 10mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6764BM 15mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6765BM 15mmX3/4"BSP SWIVEL ELBOW (Brass Nut) SPSU6714M 10mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6764M 15mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6765M 15mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6745M 22mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6714BM 10mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6764BM 15mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6765BM 15mmX3/4"BSP SWIVEL UNION (Brass Nut) SPSU6745BM 22mmX3/4"BSP SWIVEL UNION (Brass Nut) SPST671M 10mm END STOP SPST676M 15mm END STOP SPST674M 22mm END STOP SRST670M 28mm END STOP SPE6711M 10mm ELBOW SPE6766M 15mm ELBOW SPE6744M 22mm ELBOW SPE6700M 28mm ELBOW SPE6761M 15mmX10mm REDUCING ELBOW SPE6746M 22mmX15mm REDUCING ELBOW SPATE6766M 15mm-135o STEM ELBOW SPATE6744M 22mm-135o STEM ELBOW SPR6716M 10mmX15mm REDUCER SPR6764M 15mmX22mm REDUCER SPR6760M 15mmX28mm REDUCER SPR6740M 22mmX28mm REDUCER SPT67111M 10mm TEE SPT67666M 15mm TEE SPT67444M 22mm TEE SPT67000M 28mm TEE SPT67611M 15mmX10mmX10mm REDUCING TEE SPT67661M 15mmX15mmX10mm REDUCING TEE SPT67664M 15mmX15mmX22mm REDUCING TEE SPT67466M 22mmX15mmX15mm REDUCING TEE SPT67464M 22mmx15mmx22mm REDUCING TEE SPT67441M 22mmx22mmx10mm REDUCING TEE SPT67446M 22mmX22mmX15mm REDUCING TEE SPT67044M 28mmX22mmX22mm REDUCING TEE SPT67040M 28mmX22mmX28mm REDUCING TEE SPT67001M 28mmX28mmX10mm REDUCING TEE SPT67006M 28mmX28mmX15mm REDUCING TEE SPT67004M 28mmX28mmX22mm REDUCING TEE SPTT67441M 22mX22mmX10mm TUBE TEE SPTT67446M 22mX22mmX15mm TUBE TEE SPTE6711M 10mm TUBE ELBOW SPTE6716M 10mmx15mm TUBE ELBOW SPTE6766M 15mm TUBE ELBOW SPTE6744M 22mm TUBE ELBOW SRMC6764M 15mmX1/2"BSPT MALE CONNECTOR SRME6764M 15mmX1/2"BSPT MALE ELBOW SRFWC6741M 22mmX10mm 4WAY MANIFOLD SRU6766SM 15mm SLIP UNION SRU6744SM 22mm SLIP UNION STS10M 10mm PIPE INSERT STS15M 15mm PIPE INSERT STS22M 22mm PIPE INSERT STS28M 28mm PIPE INSERT SRAV63M 15mm AIR-VENT CONNECTOR

Approval Holder:

City Plumbing

Company Name

City Plumbing

Address

Highbourne House, 1 Eldon Way, Crick, Northamptonshire

Postcode

NN6 7SL

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

View All Listings by this Company

“D-“ and “E-“ range of 304 and 316L stainless steel press fittings, in either ‘M’ press profile (D- prefix models) or ‘V’ press profile (E- prefix models) for use with stainless steel pipe (316L & 304 manufactured to EN10312). For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature: 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250912029

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Company logo “WEGS”, size, material SUS304 or SUS316L on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

D-DN10 - 90° Equal Elbow: 15mm, D-DN15 - 90° Equal Elbow: 18mm, D-DN20 - 90° Equal Elbow: 22mm, D-DN25 - 90° Equal Elbow: 28mm, D-DN32 - 90° Equal Elbow: 35mm, D-DN40 - 90° Equal Elbow: 42mm, D-DN50 - 90° Equal Elbow: 54mm, D-DN10 - 90° B-type equal elbow: 15mm, D-DN15 - 91° B-type equal elbow: 18mm, D-DN20 - 92° B-type equal elbow: 22mm, D-DN25 - 93° B-type equal elbow: 28mm, D-DN32 - 94° B-type equal elbow: 35mm, D-DN40 - 95° B-type equal elbow: 42mm, D-DN50 - 96° B-type equal elbow: 54mm, D-DN15×10 - 90° Reducing Elbow: 15×18mm, D-DN20×15 - 91° Reducing Elbow: 22×18mm, D-DN25×15 - 92° Reducing Elbow: 28×18mm, D-DN25×20 - 93° Reducing Elbow: 28×22mm, D-DN10×½ - 90° Male Elbow: 15mm×½, D-DN10×¾ - 90° Male Elbow: 15mm×¾, D-DN15×½ - 90° Male Elbow: 18mm×½, D-DN15×¾ - 90° Male Elbow: 18mm×¾, D-DN20×¾ - 90° Male Elbow: 22mm×¾, D-DN25×1 - 90° Male Elbow: 28 mm×1, D-DN32×1¼ - 90° Male Elbow: 35mm×1¼, D-DN40×1½ - 90° Male Elbow: 42mm×1½, D-DN50×2 - 90° Male Elbow: 54mm×2, D-DN10×½ - 90° female elbow: 15mm×½, D-DN10×¾ - 90° female elbow: 15mm×¾, D-DN15×½ - 90° female elbow: 18mm×½, D-DN15×¾ - 90° female elbow: 18mm×¾, D-DN20×¾ - 90° female elbow: 22mm×¾, D-DN25×1 - 90° female elbow: 28 mm×1, D-DN32×1¼ - 90° female elbow: 35mm×1¼, D-DN40×1½ - 90° female elbow: 42mm×1½, D-DN50×2 - 90° female elbow: 54 mm×2, D-DN10 - 45° Equal Elbow: 15mm, D-DN15 - 45° Equal Elbow: 18mm, D-DN20 - 45° Equal Elbow: 22mm, D-DN25 - 45° Equal Elbow: 28mm, D-DN32 - 45° Equal Elbow: 35mm, D-DN40 - 45° Equal Elbow: 42mm, D-DN50 - 45° Equal Elbow: 54mm, D-DN10 - 45° B-type equal elbow: 15mm, D-DN15 - 45° B-type equal elbow: 18mm, D-DN20 - 45° B-type equal elbow: 22mm, D-DN25 - 45° B-type equal elbow: 28mm, D-DN32 - 45° B-type equal elbow: 35mm, D-DN40 - 45° B-type equal elbow: 42mm, D-DN50 - 45° B-type equal elbow: 54mm, D-DN10 - Equal tee: 15mm, D-DN15 - Equal tee: 18mm, D-DN20 - Equal tee: 22mm, D-DN25 - Equal tee: 28mm, D-DN32 - Equal tee: 35mm, D-DN40 - Equal tee: 42mm, D-DN50 - Equal tee: 54mm, D-DN15×10 - Reducing Tee: 18×15mm, D-DN20×10 - Reducing Tee: 22×15mm, D-DN20×15 - Reducing Tee: 22×18mm, D-DN25×10 - Reducing Tee: 28×15mm, D-DN25×15 - Reducing Tee: 28×18mm, D-DN25×20 - Reducing Tee: 28×22mm, D-DN32×10 - Reducing Tee: 35×15mm, D-DN32×15 - Reducing Tee: 35×18mm, D-DN32×20 - Reducing Tee: 35×22mm, D-DN32×25 - Reducing Tee: 35×28mm, D-DN40×15 - Reducing Tee: 42×18mm, D-DN40×20 - Reducing Tee: 42×22mm, D-DN40×25 - Reducing Tee: 42×28mm, D-DN40×32 - Reducing Tee: 42×35mm, D-DN50×20 - Reducing Tee: 54×22mm, D-DN50×25 - Reducing Tee: 54×28mm, D-DN50×32 - Reducing Tee: 54×35mm, D-DN50×40 - Reducing Tee: 54×42mm, D-DN10×½ - Short elbow with female: 15mm×½, D-DN10×¾ - Short elbow with female: 15mm×¾, D-DN15×½ - Short elbow with female: 18mm×½, D-DN15×¾ - Short elbow with female: 18mm×¾, D-DN20×¾ - Short elbow with female: 22mm×¾, D-DN25×½ - Short elbow with female: 28mm×½, D-DN25×¾ - Short elbow with female: 28mm×¾, D-DN25×1 - Short elbow with female: 28mm×1, D-DN10×½ - Female Tee: 15mm×½, D-DN10×¾ - Female Tee: 15mm×¾, D-DN15×½ - Female Tee: 18mm×½, D-DN15×¾ - Female Tee: 18mm×¾, D-DN20×½ - Female Tee: 22mm×½, D-DN20×¾ - Female Tee: 22mm×¾, D-DN25×½ - Female Tee: 28mm×½, D-DN25×¾ - Female Tee: 28mm×¾, D-DN25×1 - Female Tee: 28 mm×1, D-DN32×½ - Female Tee: 35mm×½, D-DN32×¾ - Female Tee: 35mm×¾, D-DN32×1¼ - Female Tee: 35mm×1¼, D-DN40×½ - Female Tee: 42mm×½, D-DN40×¾ - Female Tee: 42mm×¾, D-DN40×1¼ - Female Tee: 42mm×1¼, D-DN40×1½ - Female Tee: 42mm×1½, D-DN50×½ - Female Tee: 54mm×½, D-DN50×¾ - Female Tee: 54mm×¾, D-DN50×2 - Female Tee: 54mm×2, D-DN10×½ - Male Tee: 15mm×½, D-DN10×¾ - Male Tee: 15mm×¾, D-DN15×½ - Male Tee: 18mm×½, D-DN15×¾ - Male Tee: 18mm×¾, D-DN20×½ - Male Tee: 22mm×½, D-DN20×¾ - Male Tee: 22mm×¾, D-DN25×½ - Male Tee: 28mm×½, D-DN25×¾ - Male Tee: 28mm×¾, D-DN25×1 - Male Tee: 28 mm×1, D-DN32×½ - Male Tee: 35mm×½, D-DN32×¾ - Male Tee: 35mm×¾, D-DN32×1¼ - Male Tee: 35mm×1¼, D-DN40×½ - Male Tee: 42mm×½, D-DN40×¾ - Male Tee: 42mm×¾, D-DN40×1¼ - Male Tee: 42mm×1¼, D-DN40×1½ - Male Tee: 42mm×1½, D-DN50×½ - Male Tee: 54mm×½, D-DN50×¾ - Male Tee: 54mm×¾, D-DN50×2 - Male Tee: 54 mm×2, D-DN10×½ - Male Adapter: 15mm×½, D-DN10×¾ - Male Adapter: 15mm×¾, D-DN15×½ - Male Adapter: 18mm×½, D-DN15×¾ - Male Adapter: 18mm×¾, D-DN20×½ - Male Adapter: 22mm×½, D-DN20×¾ - Male Adapter: 22mm×¾, D-DN20×1 - Male Adapter: 22mm×1, D-DN25×¾ - Male Adapter: 28mm×¾, D-DN25×1 - Male Adapter: 28mm×1, D-DN32×1 - Male Adapter: 35 mm×1, D-DN32×1¼ - Male Adapter: 35mm×1¼, D-DN40×1½ - Male Adapter: 42mm×1½, D-DN50×2 - Male Adapter: 54 m×2, D-DN10 - Equal coupling: 15mm, D-DN15 - Equal coupling: 18mm, D-DN20 - Equal coupling: 22mm, D-DN25 - Equal coupling: 28mm, D-DN32 - Equal coupling: 35mm, D-DN40 - Equal coupling: 42mm, D-DN50 - Equal coupling: 54mm, D-DN15×10 - Reducing coupling: 18×15mm, D-DN20×10 - Reducing coupling: 22×15mm, D-DN20×15 - Reducing coupling: 22×18mm, D-DN25×10 - Reducing coupling: 28×15mm, D-DN25×15 - Reducing coupling: 28×18mm, D-DN25×20 - Reducing coupling: 28×22mm, D-DN32×15 - Reducing coupling: 35×18mm, D-DN32×20 - Reducing coupling: 35×22mm, D-DN32×25 - Reducing coupling: 35×28mm, D-DN40×15 - Reducing coupling: 42×18mm, D-DN40×20 - Reducing coupling: 42×22mm, D-DN40×25 - Reducing coupling: 42×28mm, D-DN40×32 - Reducing coupling: 42×35mm, D-DN50×15 - Reducing coupling: 54×18mm, D-DN50×20 - Reducing coupling: 54×22mm, D-DN50×25 - Reducing coupling: 54×28mm, D-DN50×32 - Reducing coupling: 54×35mm, D-DN50×40 - Reducing coupling: 54×42mm, D-DN10×½ - Female Adapter: 15mm×½, D-DN10×¾ - Female Adapter: 15mm×¾, D-DN15×½ - Female Adapter: 18mm×½, D-DN15×¾ - Female Adapter: 18mm×¾, D-DN20×½ - Female Adapter: 22mm×½, D-DN20×¾ - Female Adapter: 22mm×¾, D-DN25×½ - Female Adapter: 28mm×½, D-DN25×¾ - Female Adapter: 28mm×¾, D-DN25×1 - Female Adapter: 28mm×1, D-DN32×1¼ - Female Adapter: 35mm×1¼, D-DN40×1½ - Female Adapter: 42mm×1½, D-DN50×2 - Female Adapter: 54mm×2, D-DN10×½ - Moving Female Adapter: 15mm×½, D-DN10×¾ - Moving Female Adapter: 15mm×¾, D-DN15×½ - Moving Female Adapter: 18mm×½, D-DN15×¾ - Moving Female Adapter: 18mm×¾, D-DN20×½ - Moving Female Adapter: 22mm×½, D-DN20×¾ - Moving Female Adapter: 22mm×¾, D-DN25×1 - Moving Female Adapter: 28 mm×1, D-DN32×1¼ - Moving Female Adapter: 35mm×1¼, D-DN40×1½ - Moving Female Adapter: 42mm×1½, D-DN50×2 - Moving Female Adapter: 54 mm×2, D-DN10 - Slip coupling: 15mm, D-DN15 - Slip coupling: 18mm, D-DN20 - Slip coupling: 22mm, D-DN25 - Slip coupling: 28mm, D-DN32 - Slip coupling: 35mm, D-DN40 - Slip coupling: 42mm, D-DN50 - Slip coupling: 54mm, DN10×½ - Hexagonal male connector: 15mm×½, DN10×¾ - Hexagonal male connector: 15mm×¾, DN15×½ - Hexagonal male connector: 18 mm×½, DN20×¾ - Hexagonal male connector: 22 mm×¾, DN25×1 - Hexagonal male connector: 28mm×1, DN32×1¼ - Hexagonal male connector: 35 mm×1¼, DN40×1½ - Hexagonal male connector: 42mm×1½, DN50×2 - Hexagonal male connector: 54mm×2, D-DN10 - Caps: 15mm, D-DN15 - Caps: 18mm, D-DN20 - Caps: 22mm, D-DN25 - Caps: 28mm, D-DN32 - Caps: 35mm, D-DN40 - Caps: 42mm, D-DN50 - Caps: 54mm, DN15 - Straight Tube Fittings: 18mm, DN20 - Straight Tube Fittings: 22mm, DN25 - Straight Tube Fittings: 28mm, DN10 - Layflat bridge: 15mm, DN15 - Layflat bridge: 18mm, DN20 - Layflat bridge: 22mm, DN25 - Layflat bridge: 28mm, D-DN25 - Flange adapters: 28mm, D-DN32 - Flange adapters: 35mm, D-DN40 - Flange adapters: 42mm, D-DN50 - Flange adapters: 54mm.

E-DN10 - 90° Equal Elbow: 15mm, E-DN15 - 90° Equal Elbow: 18mm, E-DN20 - 90° Equal Elbow: 22mm, E-DN25 - 90° Equal Elbow: 28mm, E-DN32 - 90° Equal Elbow: 35mm, E-DN40 - 90° Equal Elbow: 42mm, E-DN50 - 90° Equal Elbow: 54mm, E-DN10 - 90° B-type equal elbow: 15mm, E-DN15 - 90° B-type equal elbow: 18mm, E-DN20 - 90° B-type equal elbow: 22mm, E-DN25 - 90° B-type equal elbow: 28mm, E-DN32 - 90° B-type equal elbow: 35mm, E-DN40 - 90° B-type equal elbow: 42mm, E-DN50 - 90° B-type equal elbow: 54mm, E-DN15×10 - 90° Reducing Elbow: 15×18mm, E-DN20×15 - 90° Reducing Elbow: 22×18mm, E-DN25×15 - 90° Reducing Elbow: 28×18mm, E-DN25×20 - 90° Reducing Elbow: 28×22mm, E-DN10×½ - 90° Male Elbow: 15mm×½, E-DN10×¾ - 90° Male Elbow: 15mm×¾, E-DN15×½ - 90° Male Elbow: 18mm×½, E-DN15×¾ - 90° Male Elbow: 18mm×¾, E-DN20×¾ - 90° Male Elbow: 22mm×¾, E-DN25×1 - 90° Male Elbow: 28 mm×1, E-DN32×1¼ - 90° Male Elbow: 35mm×1¼, E-DN40×1½ - 90° Male Elbow: 42mm×1½, E-DN50×2 - 90° Male Elbow: 54mm×2, E-DN10×½ - 90° female elbow: 15mm×½, E-DN10×¾ - 90° female elbow: 15mm×¾, E-DN15×½ - 90° female elbow: 18mm×½, E-DN15×¾ - 90° female elbow: 18mm×¾, E-DN20×¾ - 90° female elbow: 22mm×¾, E-DN25×1 - 90° female elbow: 28 mm×1, E-DN32×1¼ - 90° female elbow: 35mm×1¼, E-DN40×1½ - 90° female elbow: 42mm×1½, E-DN50×2 - 90° female elbow: 54 mm×2, E-DN10 - 45° Equal Elbow: 15mm, E-DN15 - 45° Equal Elbow: 18mm, E-DN20 - 45° Equal Elbow: 22mm, E-DN25 - 45° Equal Elbow: 28mm, E-DN32 - 45° Equal Elbow: 35mm, E-DN40 - 45° Equal Elbow: 42mm, E-DN50 - 45° Equal Elbow: 54mm, E-DN10 - 45° B-type equal elbow: 15mm, E-DN15 - 45° B-type equal elbow: 18mm, E-DN20 - 45° B-type equal elbow: 22mm, E-DN25 - 45° B-type equal elbow: 28mm, E-DN32 - 45° B-type equal elbow: 35mm, E-DN40 - 45° B-type equal elbow: 42mm, E-DN50 - 45° B-type equal elbow: 54mm, E-DN10 - Equal tee: 15mm, E-DN15 - Equal tee: 18mm, E-DN20 - Equal tee: 22mm, E-DN25 - Equal tee: 28mm, E-DN32 - Equal tee: 35mm, E-DN40 - Equal tee: 42mm, E-DN50 - Equal tee: 54mm, E-DN15×10 - Reducing Tee: 18×15mm, E-DN20×10 - Reducing Tee: 22×15mm, E-DN20×15 - Reducing Tee: 22×18mm, E-DN25×10 - Reducing Tee: 28×15mm, E-DN25×15 - Reducing Tee: 28×18mm, E-DN25×20 - Reducing Tee: 28×22mm, E-DN32×10 - Reducing Tee: 35×15mm, E-DN32×15 - Reducing Tee: 35×18mm, E-DN32×20 - Reducing Tee: 35×22mm, E-DN32×25 - Reducing Tee: 35×28mm, E-DN40×15 - Reducing Tee: 42×18mm, E-DN40×20 - Reducing Tee: 42×22mm, E-DN40×25 - Reducing Tee: 42×28mm, E-DN40×32 - Reducing Tee: 42×35mm, E-DN50×20 - Reducing Tee: 54×22mm, E-DN50×25 - Reducing Tee: 54×28mm, E-DN50×32 - Reducing Tee: 54×35mm, E-DN50×40 - Reducing Tee: 54×42mm, E-DN10×½ - Short elbow with female: 15mm×½, E-DN10×¾ - Short elbow with female: 15mm×¾, E-DN15×½ - Short elbow with female: 18mm×½, E-DN15×¾ - Short elbow with female: 18mm×¾, E-DN20×¾ - Short elbow with female: 22mm×¾, E-DN25×½ - Short elbow with female: 28mm×½, E-DN25×¾ - Short elbow with female: 28mm×¾, E-DN25×1 - Short elbow with female: 28mm×1, E-DN10×½ - Female Tee: 15mm×½, E-DN10×¾ - Female Tee: 15mm×¾, E-DN15×½ - Female Tee: 18mm×½, E-DN15×¾ - Female Tee: 18mm×¾, E-DN20×½ - Female Tee: 22mm×½, E-DN20×¾ - Female Tee: 22mm×¾, E-DN25×½ - Female Tee: 28mm×½, E-DN25×¾ - Female Tee: 28mm×¾, E-DN25×1 - Female Tee: 28 mm×1, E-DN32×½ - Female Tee: 35mm×½, E-DN32×¾ - Female Tee: 35mm×¾, E-DN32×1¼ - Female Tee: 35mm×1¼, E-DN40×½ - Female Tee: 42mm×½, E-DN40×¾ - Female Tee: 42mm×¾, E-DN40×1¼ - Female Tee: 42mm×1¼, E-DN40×1½ - Female Tee: 42mm×1½, E-DN50×½ - Female Tee: 54mm×½, E-DN50×¾ - Female Tee: 54mm×¾, E-DN50×2 - Female Tee: 54mm×2, E-DN10×½ - Male Tee: 15mm×½, E-DN10×¾ - Male Tee: 15mm×¾, E-DN15×½ - Male Tee: 18mm×½, E-DN15×¾ - Male Tee: 18mm×¾, E-DN20×½ - Male Tee: 22mm×½, E-DN20×¾ - Male Tee: 22mm×¾, E-DN25×½ - Male Tee: 28mm×½, E-DN25×¾ - Male Tee: 28mm×¾, E-DN25×1 - Male Tee: 28 mm×1, E-DN32×½ - Male Tee: 35mm×½, E-DN32×¾ - Male Tee: 35mm×¾, E-DN32×1¼ - Male Tee: 35mm×1¼, E-DN40×½ - Male Tee: 42mm×½, E-DN40×¾ - Male Tee: 42mm×¾, E-DN40×1¼ - Male Tee: 42mm×1¼, E-DN40×1½ - Male Tee: 42mm×1½, E-DN50×½ - Male Tee: 54mm×½, E-DN50×¾ - Male Tee: 54mm×¾, E-DN50×2 - Male Tee: 54 mm×2, E-DN10×½ - Male Adapter: 15mm×½, E-DN10×¾ - Male Adapter: 15mm×¾, E-DN15×½ - Male Adapter: 18mm×½, E-DN15×¾ - Male Adapter: 18mm×¾, E-DN20×½ - Male Adapter: 22mm×½, E-DN20×¾ - Male Adapter: 22mm×¾, E-DN20×1 - Male Adapter: 22mm×1, E-DN25×¾ - Male Adapter: 28mm×¾, E-DN25×1 - Male Adapter: 28mm×1, E-DN32×1 - Male Adapter: 35 mm×1, E-DN32×1¼ - Male Adapter: 35mm×1¼, E-DN40×1½ - Male Adapter: 42mm×1½, E-DN50×2 - Male Adapter: 54 m×2, E-DN10 - Equal coupling: 15mm, E-DN15 - Equal coupling: 18mm, E-DN20 - Equal coupling: 22mm, E-DN25 - Equal coupling: 28mm, E-DN32 - Equal coupling: 35mm, E-DN40 - Equal coupling: 42mm, E-DN50 - Equal coupling: 54mm, E-DN15×10 - Reducing coupling: 18×15mm, E-DN20×10 - Reducing coupling: 22×15mm, E-DN20×15 - Reducing coupling: 22×18mm, E-DN25×10 - Reducing coupling: 28×15mm, E-DN25×15 - Reducing coupling: 28×18mm, E-DN25×20 - Reducing coupling: 28×22mm, E-DN32×15 - Reducing coupling: 35×18mm, E-DN32×20 - Reducing coupling: 35×22mm, E-DN32×25 - Reducing coupling: 35×28mm, E-DN40×15 - Reducing coupling: 42×18mm, E-DN40×20 - Reducing coupling: 42×22mm, E-DN40×25 - Reducing coupling: 42×28mm, E-DN40×32 - Reducing coupling: 42×35mm, E-DN50×15 - Reducing coupling: 54×18mm, E-DN50×20 - Reducing coupling: 54×22mm, E-DN50×25 - Reducing coupling: 54×28mm, E-DN50×32 - Reducing coupling: 54×35mm, E-DN50×40 - Reducing coupling: 54×42mm, E-DN10×½ - Female Adapter: 15mm×½, E-DN10×¾ - Female Adapter: 15mm×¾, E-DN15×½ - Female Adapter: 18mm×½, E-DN15×¾ - Female Adapter: 18mm×¾, E-DN20×½ - Female Adapter: 22mm×½, E-DN20×¾ - Female Adapter: 22mm×¾, E-DN25×½ - Female Adapter: 28mm×½, E-DN25×¾ - Female Adapter: 28mm×¾, E-DN25×1 - Female Adapter: 28mm×1, E-DN32×1¼ - Female Adapter: 35mm×1¼, E-DN40×1½ - Female Adapter: 42mm×1½, E-DN50×2 - Female Adapter: 54mm×2, E-DN10×½ - Moving Female Adapter: 15mm×½, E-DN10×¾ - Moving Female Adapter: 15mm×¾, E-DN15×½ - Moving Female Adapter: 18mm×½, E-DN15×¾ - Moving Female Adapter: 18mm×¾, E-DN20×½ - Moving Female Adapter: 22mm×½, E-DN20×¾ - Moving Female Adapter: 22mm×¾, E-DN25×1 - Moving Female Adapter: 28 mm×1, E-DN32×1¼ - Moving Female Adapter: 35mm×1¼, E-DN40×1½ - Moving Female Adapter: 42mm×1½, E-DN50×2 - Moving Female Adapter: 54 mm×2, E-DN10 - Slip coupling: 15mm, E-DN15 - Slip coupling: 18mm, E-DN20 - Slip coupling: 22mm, E-DN25 - Slip coupling: 28mm, E-DN32 - Slip coupling: 35mm, E-DN40 - Slip coupling: 42mm, E-DN50 - Slip coupling: 54mm, E-DN10 - Caps: 15mm, E-DN15 - Caps: 18mm, E-DN20 - Caps: 22mm, E-DN25 - Caps: 28mm, E-DN32 - Caps: 35mm, E-DN40 - Caps: 42mm, E-DN50 - Caps: 54mm, E-DN25 - Flange adapters: 28mm, E-DN32 - Flange adapters: 35mm, E-DN40 - Flange adapters: 42mm, E-DN50 - Flange adapters: 54mm.

Product Images

Approval Holder:

Wegs Hubei Fluid Technology Co., Ltd

Company Name

Wegs Hubei Fluid Technology Co., Ltd

Address

Intersection of Xiyuan 7th Road and Xiyuan 10th Road, Phase III, Hitech Development Zone, Xianning City, Hubei Province

Country

China

View All Listings by this Company

Manufacturer:

Wegs Hubei Fluid Technology Co., Ltd

Company Name

Wegs Hubei Fluid Technology Co., Ltd

Address

Intersection of Xiyuan 7th Road and Xiyuan 10th Road, Phase III, Hitech Development Zone, Xianning City, Hubei Province

Country

China

View All Listings by this Company

Flange fittings with TP2 copper bodies, for use with TP2 copper pipe to EN1057. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2110416

Size:

28mm, 35mm, 42mm, 54mm, 66.7mm, 76.1mm, 88.9mm, 108mm

Marking:

"CORE" and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

CCP1FMF042, CCP1FMF054, CCP1FMF067, CCP1FMF076, CCP1FMF0108 FLANGES

Product Images

Approval Holder:

Smith Brothers Stores Limited

Company Name

Smith Brothers Stores Limited

Address

Unit V2 Winchester Avenue, Blaby, Leicester

Postcode

LE8 4GZ

View All Listings by this Company

Range of in-line water meters incorporating bronze copper alloy bodies and EPDM O rings. Maximum working pressure 10.0 Bar Maximum operating temperature 30.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

EMS, Model and other technical data on water meter dial

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

TH15 – DN 15 CNPA 49 Male Pipe Thread (25.8mm) TH20 – DN 20 CNPA 49 Male Pipe Thread (33mm) TH25 – DN 25 CNPA 49 Male Pipe Thread (39mm)

Approval Holder:

Energy Management System Co. Ltd.

Company Name

Energy Management System Co. Ltd.

Address

No8, Dali 3rd Rd., Shanhua District, Southern Taiwan Science Park (STSP) Tainan City, Taiwan

Phone

+886-6-5050207

View All Listings by this Company

Manufacturer:

Energy Management System Co. Ltd.

Company Name

Energy Management System Co. Ltd.

Address

No8, Dali 3rd Rd., Shanhua District, Southern Taiwan Science Park (STSP) Tainan City, Taiwan

Phone

+886-6-5050207

View All Listings by this Company

Range of electromagnetic flow meters with carbon steel bodies, NBR inner liner and stainless-steel electrodes. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 - DN300 flanged.

Marking:

Tianjin Sure Instrument Co., Ltd. trademark logo (‘sure’), Tianjin Sure Instrument Co., Ltd., product type, model number, series number and other technical information on data plate on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

LDG-WR

Product Images

Approval Holder:

Tianjin Sure Instrument Co., Ltd.

Company Name

Tianjin Sure Instrument Co., Ltd.

Address

No.6-6, Yan'an Road, Nankai District, Tianjin

View All Listings by this Company

Manufacturer:

Tianjin Sure Instrument Co., Ltd.

Company Name

Tianjin Sure Instrument Co., Ltd.

Address

East of Huifeng Road and south of Fazhan Road, North District, Qingxian Economic and Technological Development Zone, Cangzhou City, Hebei Province

View All Listings by this Company

CM(E) range of electronically operated pumps available in stainless steel, (‘EN 1.4301/AISI304’ or ‘EN 1.4401 /AISI316’) and cast iron. The pumps are supplied with Sic-Sic mechanical shaft seals and FKM or EPDM seals. Maximum operating parameters: Cast iron models: Maximum working pressure 6.0 bar @ 90°C. Maximum working pressure 10.0 bar @ 40°C. Stainless steel models (not self-priming variants): Maximum working pressure 10.0 bar @ 99°C. Maximum working pressure 16.0 bar @ 90°C. Stainless steel self-priming models (CM(E) 1, 3 & 5 (AISI 304) only): Maximum working pressure 10.0 or 16.0 bar @ 60°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251007701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” - 2” BSP (F) or NPT (F) inlet and outlet.

Marking:

Grundfos and Grundfos logo, type, model, manufacturing country and technical information on adhesive labels either on the terminal box or fan cover. Grundfos and Grundfos logo on the terminal box or fan cover.

Installation Requirements:

R001 R415

Expiry date:

31/10/2030

Model:

CM(E)1, CM(E)3 and CM(E)5: CM(E)1, cast iron / AISI304 2 – 8 stages. CM(E)3, cast iron / AISI304 2 – 8 stages. CM(E)5, cast iron / AISI304 2 – 8 stages. CM(E)1, AISI316 2 - 14 stages. CM(E)3, AISI316 2 - 14 stages. CM(E)5, AISI316 2 - 13 stages. CM(E)10 CM(E)15 and CM(E)25: CM(E)10, cast iron / AISI304 1 – 5 stages. CM(E)15, cast iron / AISI304 1 – 4 stages. CM(E)25, cast iron / AISI304 1 – 4 stages. CM(E)10, AISI316 1 – 8 stages. CM(E)15, AISI316 1 – 4 stages. CM(E)25, AISI316 1 – 4 stages. Self-priming models: CM(E)1, AISI304 3 – 6 stages (S or O) CM(E)3, AISI304 3 – 6 stages (S or O) CM(E)5, AISI304 3 – 7 stages (S or O) Model key: CM/CME X1-X2 X3 X4-X5-X6-X7-X8 X9 X10 X11 X11-X12-X13-X14 Where: CM = Centrifugal Modular. CME = Centrifugal Modular with integrated frequency converter. X1 = Rated flow rate at 50 Hz (m³/h): 1-25. X2 = Number of impellers: 1-14. X3 = Pump Versions: A - Basic Version. E: Pumps with certificates/approvals. O: Self-priming version (maximum suction lift 8 metres) (Only available on CM(E) 1, 3 & 5 stainless steel (AISI304) models). S: Self-priming version (maximum suction lift 4 metres) (Only available on CM(E) 1, 3 & 5 stainless steel (AISI304) models). X4 = Pipe connection: R: Rp (ISO 7/1). S: Internal NPT thread. X5 = Material in contact with pump media: A: inlets and outlets parts EN-GJL-200, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. G: Sleeve, Pump shaft + Impellers and chambers EN 1.4401/AISI 316. I: Sleeve, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. X6 = Rubber parts in pump (excluding neck ring and shaft seal): E: EPDM. V: FKM. X7 = Shaft seal: A: O-ring seal with fixed driver. X8 = Material of rotating seal face: Q: Silicon Carbide (SIC). X9 = Material of stationary seal face: Q: Silicon Carbide (SIC). X10 =Material of secondary seal: E: EPDM. V: FKM. X11 = Supply voltage (electrical characteristics - not relevant for the WRAS approval): A/B/B1/B2/C1/E/E1/F/G/H/J/O/S/T/U/V/X. X12 = Motor information(electrical characteristics - not relevant for the WRAS approval): A/B/C/D/EF/G/H/I/J. X13 = Mains plug (electrical characteristics - not relevant for the WRAS approval): A/B/C/D. X14 = Sensor (electrical characteristics - not relevant for the WRAS approval): N: No sensor. Example: CM 10-3 A-R-I-E-A Q Q E C1-A-A-N

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of overhead shower outlets. The inlet incorporates a stainless-steel filter washer. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250912015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

½” BSP (F).

Marking:

SUERDA on body.

Installation Requirements:

R001 R040

Expiry date:

30/09/2030

Model:

Round Slim Shower Head: SD42508 - 300mm - Chrome. Square Slim Shower Head: SD42509 - 300mm - Chrome. Square Shower Head: SDH1D121 - 250mm - Chrome, SDH1D121BK - 250mm - Black, SDH1D121BB - 250mm - Brushed Brass. Round Shower Head: TS03301 - 250mm - Chrome, TS03301BK - 250mm - Black, TS03301BB - 250mm - Brushed.

Product Images

Approval Holder:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company

Section:

1650 Shower Outlets

Description:

A Range of Shower head(s) and/or shower handset(s).

Undefinable Air Gap – See IRN’s

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

30/09/2030

Notes & Further Information

Two Fixed Head's with different finish and size as below FH SLRD01 C / BB / GM - (Dia 200mm) FH SLRD02 C - (Dia 250mm) FH SLRD03 C - (Dia 300mm) 225788 - (Wickes selling code for FH SLRD03 C) RP3 FH SLRD01 C - (Dia 200mm, chrome 3) FH TDRD01 C - (Dia 157mm) FH TDRD01 C / G - (Dia 200mm) FH TDRD03 C - (Dia 300mm)

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Section:

1650 Shower Outlets

Description:

A Range of Shower head(s) and/or shower handset(s).

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

31/10/2030

Notes & Further Information

The suffixes of ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Product Images

Approval Holder:

Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name

Guangzhou KIND Architecture Material Technology Co., Ltd.

Address

Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province

Country

China

General Email

sale@watersino.com

View All Listings by this Company

Section:

1650 Shower Outlets

Description:

A Shower head(s) and/or shower handset(s).

Ceiling Mounted. Undefinable Air Gap - see IRNs.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

31/10/2030

Notes & Further Information

Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset LS0 – moon white AL0 – Brushed hard graphite DL0 – brushed warm sunset GN0 – brushed cool sunrise GL0 – cool sunrise MG0 – satin graphite MS0 – satin steel A00 – hard graphite BE0 – polished nickel EN0 – brushed nickel

Product Images

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Manufacturers:

Grohe AG

Range of flanged `Y` patterned in-line strainers with blue, black or red epoxy coated ductile iron bodies, stainless steel mesh. Maximum working pressure 16 Bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN40 – DN600

Marking:

JD logo and product info on data plate. Size, pressure & flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

V4

Product Images

Approval Holder:

JD Fire Ltd.

Company Name

JD Fire Ltd.

Address

Wheatfield Works, Ashton Road, Oldham

Country

OL8 3HX

View All Listings by this Company

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)

Marking:

Watts logo (W), size, pressure rating and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

YG11-20 & YG11-20N 'Y' PATTERNED STRAINERS

Product Images

Approval Holder:

Watts Water Equipment Manufacturing (Ningbo) Co. Ltd.

Company Name

Watts Water Equipment Manufacturing (Ningbo) Co. Ltd.

Address

No.536 Mingzhou West Road Beilun District Ningbo

Country

China

View All Listings by this Company

Range of In-line ‘Y’ patterned strainer with ductile iron bodies (blue epoxy powder coated) and stainless-steel screens. Maximum working pressure 16.0 bar. Maximum operating temperature 85ºC.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN40-DN300 Flanged.

Marking:

logo, size, PN and WRAS on body. STAINLESS STEEL NAME PLATE Rating – PN16 Size – (TBC) Serial Number – AFC/------/ Tested – EN12266 Date – (date of Manufacture) Model No – TR318

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

TR318

Approval Holder:

AFFCO Flow control UK

Company Name

AFFCO Flow control UK

Address

unit 7 Stafford park 12 Telford Shropshire

Postcode

TF3 3BJ

Country

United Kingdom

General Email

info@affco-flowcontrol.co.uk

View All Listings by this Company

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)

Marking:

Conex, size, pressure rating and flow arrow on body. Product info on data plate.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

1804

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of In-line Y patterned strainers with ductle iron bodies (blue epoxy powder coated) and stainless-steel mesh. Maximum working pressure: 16 Bar Maximum operating temperature: 85 °C

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN65, DN80, DN100, DN125, DN150 & DN200,flanged connections

Marking:

Fei Xian Dalu logo, DN, PN and Flow arrow on body

Installation Requirements:

R001 R120

Expiry date:

31/01/2030

Model:

STRN301001, STRN301002, STRN301003, STRN301004, STRN301005 & STRN30100.

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

Fei Xian Dalu Valve Co. Ltd.

Company Name

Fei Xian Dalu Valve Co. Ltd.

Address

No.6 YANPO ROAD ECONOMIC DEVELOPMENT ZONE FEIXIAN SHANDONG PROVINCE

Country

China

General Email

524049127@qq.com

View All Listings by this Company

Section:

1750 Taps

Description:

A Range of Draw off bib tap(s)

Wall mounted. Undefinable Air Gap - see IRNs

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

31/10/2030

Product Images

Approval Holder:

Zhejiang Tasan Flow Tech Co., Ltd

Company Name

Zhejiang Tasan Flow Tech Co., Ltd

Address

No.25 Jinbo Road Bingang Industrial Zone Shamen Town Yuhuan City Zhejiang Province

Country

China

View All Listings by this Company

Manufacturers:

Zhejiang Tasan Flow Tech Co., Ltd

Section:

1780 Taps

Description:

A Range of Hose union tap(s).

Wall Mounted

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040 R060

Expiry date:

31/10/2030

Product Images

Approval Holder:

Yuhuan General Ball Valve Factory Co., Ltd

Company Name

Yuhuan General Ball Valve Factory Co., Ltd

Address

Yungang Village Chumen Town Yuhuan Zhejiang

Country

China

View All Listings by this Company

Manufacturers:

Yuhuan General Ball Valve Factory Co., Ltd.

Section:

1800 Taps

Description:

A Range of Pillar tap(s).

Deck mounted Capable of achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006

Expiry date:

30/09/2030

Product Images

Approval Holder:

Guangzhou IAPMO Laboratory Co. Ltd

Company Name

Guangzhou IAPMO Laboratory Co. Ltd

Address

No.201, Building A, Yushu Industrial Park Science City Huangpu District Guangzhou

Country

China

General Email

Qiunan.Liang@iapmortl.org

View All Listings by this Company

Manufacturers:

Taizhou Xinya Sanitary Ware Co., Ltd

Section:

1800 Taps

Description:

A Range of Pillar tap(s).

Deck Mounted Capable of Achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006

Expiry date:

31/10/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Manufacturers:

PPI Xiamen Industry Co Ltd

Section:

1800 Taps

Description:

A Range of Pillar tap(s).

Deck mounted. Capable of achieving AUK2 Tap Gap.

Installation Requirements:

R001 R005

Expiry date:

31/10/2030

Notes & Further Information

X XXX Denotes the following: First X: Different handle option and the second, third & fourth XXX for different finishes: Handles: A – Single lever type Chrome – No suffix, brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1

Product Images

Approval Holder:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company

Manufacturers:

PPI XIAMEN INDUSTRY CO LTD

Range of pillar taps (chrome plated brass bodies) incorporating quarter turn ceramic disc headworks with single lever operating members and flow regulator in the inlet (1/2” only). The spout outlets incorporate a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure: 10.0 Bar Maximum operating temperature: 85°C

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

251002008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” & ¾” BSP (M).

Marking:

Armitage Shanks on operating member.

Installation Requirements:

R001 R005

Expiry date:

31/10/2030

Model:

B3304AA & B3305AA

Approval Holder:

Armitage Shanks

Company Name

Armitage Shanks

Address

Old Road (Lodge 1), Armitage, Rugeley

Postcode

WS15 4BT

Country

Staffordshire,

Phone

+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Range of stainless-steel braided, EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature: 60°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

250912045

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

SODAO, WRAS and year of manufacture (YYYY).

Installation Requirements:

R001 R008

Expiry date:

30/09/2030

Model:

SD-x-xx-xx-xxx Where: “x” = bore diameter: DN8, DN12 or DN20. “xx” = connection sizes: 01 = 1/4” OD (plain pipe for pushfit), 02 = 3/8” OD (plain pipe for pushfit), 03 = F1/2” OD (plain pipe for pushfit), 04 = F3/8”, 05 = M3/8”, 06 = F1/2”, 07 = M1/2”, 08 = F3/4”, 09 = M3/4”, 10 = F1”, 11 = M1”, 12 = Elbow 1/2”, 13 = Elbow 3/4”, 14 = Elbow 1". “xxx” = hose length: 15cm-200cm. Connection: 01, 02, 03, 04, 05, 06, 07, 12 applicable for DN8 only. Connection: 06, 07, 08, 09, 12, 13 applicable for DN12 only. Connection: 08, 09, 10, 11, 13, 14 applicable for DN20 only.

Product Images

Approval Holder:

SHANGHAI SODAO SANITARYWARE EQUIPMENT CO., LTD

Company Name

SHANGHAI SODAO SANITARYWARE EQUIPMENT CO., LTD

Address

1-2, Building 9, Donglin Science Park, No. 408 Nanwenzao Road, Baoshan District, Shanghai

View All Listings by this Company

Manufacturer:

SODAO PLUMBING TECHNOLOGY (TAIZHOU) CO., LTD

Company Name

SODAO PLUMBING TECHNOLOGY (TAIZHOU) CO., LTD

Address

No.5, Youth West Road, Zhongshan Industrial Zone, Chumen Town, Yuhuan City, Zhejiang

View All Listings by this Company

Range of Stainless-Steel braided EPDM lined flexible hose assemblies with various end connections. For use with copper pipe manufactured to EN1057 Maximum working pressure; 16 Bar Maximum operating temperature; 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

251002010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models

Marking:

Fanski, WRAS and year of manufacture (YYYY) on the hose ferrule.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

DG10E-WRAS-461-L (3/4" BSP (F) x 21mm compression) DG10E-WRAS-462-L (1” BSP (F) x 1” BSP (F)) DG10E-WRAS-463-L (1” BSP (F) x 1” BSP (M)) DG10E-124-001-L (1/2” BSP (F) x 15mm Spigot) Model naming rules: DG10E-WRAS-461-L as example, DG10E=series name, 461= model code, L=length and can be between 50mm and 4000mm.

Approval Holder:

Fanski Group Inc.

Company Name

Fanski Group Inc.

Address

NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang

Postcode

317600

Country

China

View All Listings by this Company

Manufacturer:

Fanski Group Inc.

Company Name

Fanski Group Inc.

Address

NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang

Postcode

317600

Country

China

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections. Some models incorporate push-fit isolation valves. Compression connection to be used with DM LLDPE pipes or PEX barrier pipe manufactured to BS7291-3. Maximum working pressure and maximum operating temperature 12 bar @cold water use only & 7 bar @ 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

251004001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Fanski, WRAS, year of manufacture (YYYY) stamped on ferrule.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

DG10E-016-001-L F3/4” x 15mm PF DN13 DG10E-016-002-L F3/4” x 15mm PF with valve DN13 DG10E-016-003-L F3/4” x 22mm PF with valve DN13 DG10E-016-004-L F3/4” x 21mm PF with valve DN13 DG10E-016-005-L F3/4” elbow x 15mm PF with valve DN13 DG10E-016-006-L F3/4” elbow x 15mm stand pipe DN13 DG10E-016-007-L F3/4” elbow x F3/4” DN13 DG10E-016-008-L F3/4” x 21mm PF with valve DN13 DG10E-016-009-L F3/4” x 22mm PF with valve DN13 DG10E-016-010-L F3/4” x 15mm stand pipe DN13 DG10E-016-011-L F3/4” elbow x 22mm PF with valve DN20 DG10E-016-012-L F3/4” x 22mm PF with valve DN20 DG10E-016-013-L F3/4” x F1” DN20 Push-fit connections for use with copper pipe manufactured to BS EN 1057. Model naming rules: "DG10E-016-001-L" as example, DG10E-016=series name, 001=model code, L=length and can be between 50mm and 4000mm.

Approval Holder:

Fanski Group Inc.

Company Name

Fanski Group Inc.

Address

NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang

Postcode

317600

Country

China

View All Listings by this Company

Range of flexible corrugated stainless-steel tubing with white plastic covering. Compression connections are for use with copper pipe (manufactured to EN 1057). Captive nut end connections incorporate an EPDM gasket. 2BACa0504 prefix models incorporate a servicing valve (chromium plated brass body with brass ball) on the compression end connection. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1870 Tubes

Section Subtitle:

Flexible - Metal.

WRAS Approval Number:

250912031

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

IDC, DN, PN, WRAS, year of manufacture (YYYY) on ferrule/end connection. Size on both captive and compression nut. Flow arrow on servicing valve body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

2BACa03042202: 15mm compression x ½” BSP (F), 2BACa03042302: 15mm compression x ¾” BSP (F), 2BACa03043202: 22mm compression x ½” BSP (F), 2BACa03043302: 22mm compression x ¾” BSP (F), 2BACa03032202: 15mm compression, 2BACa03033302: 22mm compression, 2BACa05042202: 15mm compression ISO x ½” BSP (F), 2BACa05042302: 15mm compression ISO x ¾” BSP (F), 2BACa05043202: 22mm compression ISO x ½” BSP (F), 2BACa05043302: 22mm compression ISO x ¾” BSP (F), 2BACa02012202: ½” BSP (F)x(F), 2BACa02013302: ¾” BSP (F)x(F).

Product Images

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC Fluid Control Co Ltd

Company Name

IDC Fluid Control Co Ltd

Address

No.6, Shengyuan Road, Mechanical & Electrical Industrial Zone, Yuhuan City, Taizhou City, Zhejiang Province

Country

China

General Email

View All Listings by this Company

Range of air venting valves with a blue epoxy coated ductile iron body, plastic float, EPDM ‘O’-rings and seals. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1980 Valves

Section Subtitle:

Air venting. Fittings in this section are suitable for above ground installations only.

WRAS Approval Number:

250912040

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Closed circuit use only.

Size:

DN50 - DN200 flanged.

Marking:

FAMAT logo (brand of SAPAG), DN, PN, GGG50 and heat no. on body.

Installation Requirements:

R001 R200

Expiry date:

30/09/2030

Model:

AD/AD1.

Product Images

Approval Holder:

SAPAG VALVES

Company Name

SAPAG VALVES

Address

2 rue du Marais HAM

Postcode

80400

Country

France

Phone

+33 (0)3 23 81 42 87

General Email

eric.vincent@sapag-valves.com

View All Listings by this Company

Range of automatic air release valves with blue epoxy coated cast iron bodies and plastic floats. Maximum working pressure 10.0 Bar 16.0 Bar, 25.0 Bar (see models) Maximum operating temperature 60.0°C

Section:

1980 Valves

Section Subtitle:

Air venting. Fittings in this section are suitable for above ground installations only.

WRAS Approval Number:

251002023

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

BAYARD, model code, date of manufacture (YYYY/MM/DD), DN, PN and other technical data on label on body.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

041750 DN40 / DN60 16 bar 041760 DN50 16 bar AD041760 DN50 16 bar 041761 2” BSP F 16 bar 041765 DN50 25 bar 041770 DN60/DN65 16 bar 041775 DN60/DN65 25 bar 041780 DN80 16 bar 041785 DN80 25 bar 041790 DN100 16 bar 041795 DN100 25 bar 041850 DN80 16 bar AD041850 DN80 16 bar 041855 DN80 25 bar 041860 DN100 16 bar AD041860 DN100 16 bar 041870 DN100 25 bar 041900 DN150 16 bar AD041900 DN150 16 bar 041910 DN150 25 bar 041951 DN200 10 bar 041961 DN200 16 bar AD041961 DN200 16 bar 041971 DN200 25 bar 041990 DN300 10 bar 041991 DN300 16 bar

Approval Holder:

Bayard

Company Name

Bayard

Address

4 Avenue Lionel Terray, 69330, Meyzieu

Country

France

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control

Wall Mounted Inlets incorporate approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R020

Expiry date:

30/09/2030

Product Images

Approval Holder:

Guangdong Kinen Sanitary Ware Industrial Co., Ltd.

Company Name

Guangdong Kinen Sanitary Ware Industrial Co., Ltd.

Address

No.57, Sijiu Road, Zhishan Town, Heshan City, Guangdong

Country

China

General Email

2894475300@qq.com

View All Listings by this Company

Manufacturers:

Guangdong Kinen Sanitary Ware Industrial Co., Ltd.

Range of wall mounted thermostatic shower valves, (brass bodies - various finishes), incorporating a thermostatic cartridge controlling the temperature. Supplied with either single lever or cross top operating members depending on model and with a manual override button. The inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85ºC.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

251002018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2" BSP male.

Marking:

SAMUEL HEATH on body.

Installation Requirements:

R001 R010 R040

Expiry date:

31/10/2030

Model:

V240-XX V640-XX V740F-XX V740K-XX These roughs are compatible with alternative decorative trims, as example: V240-XX is compatible with V221-TC-XX, V640-XX is compatible with V621-TM-XX, and V740F-XX is compatible with V721-LF-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Range of butterfly valves incorporating blue epoxy coated ductile iron bodies, stainless-steel discs and EPDM seats. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

250912038

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

"Company Logo" and product info on dataplate.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

D71X0105A Wafer butterfly valve: DN32 - DN600, D71X0206A Lugged butterfly valve: DN32 - DN600, D41X08A Double flanged butterfly valve: DN50 - DN1200.

Product Images

Approval Holder:

TIANJIN GREAT WALL FLOW VALVE CO., LTD.

Company Name

TIANJIN GREAT WALL FLOW VALVE CO., LTD.

Address

No. 5 Hengyuan Road, Jingbin Industrial Park, Wuqing District, Tianjin City

Postcode

301712

Country

China

View All Listings by this Company

Manufacturer:

TIANJIN GREAT WALL FLOW VALVE CO., LTD.

Company Name

TIANJIN GREAT WALL FLOW VALVE CO., LTD.

Address

No. 5 Hengyuan Road, Jingbin Industrial Park, Wuqing District, Tianjin City

Postcode

301712

Country

China

View All Listings by this Company

Range of butterfly valves with blue epoxy coated ductile iron bodies and discs. The valves incorporate a hand wheel operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

250912043

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN350 - DN2000 flanged.

Marking:

GM (registered trademark of Shandong Jianhua Valve Manufacturing Co., Ltd.), DN, PN and material on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

D342X-16Q.

Product Images

Approval Holder:

Shandong Jianhua Valve Manufacturing Co., Ltd.

Company Name

Shandong Jianhua Valve Manufacturing Co., Ltd.

Address

Baichihe Industry Park, Zhucheng City, Weifang City, Shandong Province

Country

China

View All Listings by this Company

Manufacturer:

Shandong Jianhua Valve Manufacturing Co., Ltd.

Company Name

Shandong Jianhua Valve Manufacturing Co., Ltd.

Address

Baichihe Industry Park, Zhucheng City, Weifang City, Shandong Province

Country

China

View All Listings by this Company

Range of butterfly valves with blue epoxy coated bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

241102092

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN100 to DN600 flanged inlet and outlet.

Marking:

AEON (brand), PN & DN cast on body. AEON and product info on data plate.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

AEON series AW-24 DN100-600

Product Images

Approval Holder:

Radius Systems Limited

Company Name

Radius Systems Limited

Address

Radius House, Berristow Lane, South Normanton, Alfreton, Derbyshire

Postcode

DE55 2JJ

Country

United Kingdom

Phone

01773582303

General Email

richard.marks@radius-systems.com

View All Listings by this Company

Range of butterfly valves incorporating blue epoxy coated ductile iron bodies and discs. Maximum working pressure 16.0 Bar. Maximum operating temperature 85.0°C

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

241102093

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN100 to DN2000 Flanged

Marking:

AEON (brand), PN & DN cast on body. AEON and product info on data plate.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

AEON AW-26 & AW-29

Product Images

Approval Holder:

Radius Systems Limited

Company Name

Radius Systems Limited

Address

Radius House, Berristow Lane, South Normanton, Alfreton, Derbyshire

Postcode

DE55 2JJ

Country

United Kingdom

Phone

01773582303

General Email

richard.marks@radius-systems.com

View All Listings by this Company

Range of butterfly valves with blue epoxy coated ductile iron bodies and discs. Maximum working pressure 16.0bar. Maximum operating temperature 85°C.

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

251002015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN200, DN250, DN300, DN350, DN400, DN600, DN600, DN700, DN800, DN900 & DN1000 Flange connection.

Marking:

IMG logo, size, PN & technical information on data plate. IMG logo, size, PN and flow arrow cast on body.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

D342X-16Q.

Approval Holder:

Tianjin International Machinery Co., Ltd.

Company Name

Tianjin International Machinery Co., Ltd.

Address

No.180 hanghai road, Tianjin pilot free trade zone Tianjin China.

View All Listings by this Company

Range of pilot operated float control valves with blue epoxy coated ductile iron bodies. The products have flow control facility controlled via a float operated pilot valve. Supplied with auxiliary components including stainless steel pipe, spherical valves, Y-pattern strainer and a needle valve. Maximum working pressure 16.0 Bar Maximum operating temperature 80.0°C

Section:

2105 Valves

Section Subtitle:

Float operated, pilot control.

WRAS Approval Number:

251002709

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 – DN300

Marking:

Albion, flow arrow, PN & DN on body. WRAS, Albion, DN, PN, max temp and model on data plates.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

ART 6100

Approval Holder:

Albion Valves (UK) Limited

Company Name

Albion Valves (UK) Limited

Address

9a Fallbank Industrial Estate Dodworth Barnsley

Postcode

S75 3LS

Country

United Kingdom

Phone

01226 729900

General Email

samjed@albionvalvesuk.com

View All Listings by this Company

Range of double swing gate, wafer, non-return valves with blue, black or red epoxy coated ductile iron bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2185 Valves

Section Subtitle:

Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should not be made to `Backflow Prevention Devices`.

WRAS Approval Number:

240404725

Size:

DN50 – DN300

Marking:

JD logo and product info on data plate. Size, pressure & flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

DH77X

Product Images

Approval Holder:

JD Fire Ltd.

Company Name

JD Fire Ltd.

Address

Wheatfield Works, Ashton Road, Oldham

Country

OL8 3HX

View All Listings by this Company

Range of swing gate, non-return valves with (blue, black or red epoxy powder coated) ductile iron bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2185 Valves

Section Subtitle:

Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should not be made to `Backflow Prevention Devices`.

WRAS Approval Number:

240902721

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 – 300 flanged

Marking:

JD logo and product info on data plate. PN, DN & flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

H44X2

Product Images

Approval Holder:

JD Fire Ltd.

Company Name

JD Fire Ltd.

Address

Wheatfield Works, Ashton Road, Oldham

Country

OL8 3HX

View All Listings by this Company

A range of non-return valve with blue epoxy coated ductile iron bodies, stainless-steel disc and EPDM seats. Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C

Section:

2185 Valves

Section Subtitle:

Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should not be made to `Backflow Prevention Devices`.

WRAS Approval Number:

250702723

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 – 600 Flanged

Marking:

ATUSA, model, size, PN and max temp on data plate. Size, PN and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

520

Product Images

Approval Holder:

ATUSA GRUPO EMPRESARIAL, S.A.

Company Name

ATUSA GRUPO EMPRESARIAL, S.A.

Address

Pol. Industrial ATUSA-Agurain, S/N 01200 Salvatierra (Álava- España)

Phone

+34 945 18 00 00

General Email

info@atusa.es

View All Listings by this Company

Range of spring-loaded resilient trim, non-return valves with blue epoxy coated ductile iron bodies, stainless steel discs, PTFE stem gaskets and EPDM seat. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2185 Valves

Section Subtitle:

Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should not be made to `Backflow Prevention Devices`.

WRAS Approval Number:

250904705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 - DN300 flanged.

Marking:

RZT (Approval holder’s logo), assembly date (YY-MM), size and PN on data plate. Size and PN on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

RZT-042.

Product Images

Approval Holder:

Chizhou Sun Rising Valve & Pipe Fitting Co. Ltd

Company Name

Chizhou Sun Rising Valve & Pipe Fitting Co. Ltd

Address

Xinhe Industrial Zone, Qingyang, Chizhou, Anhui

Country

China

View All Listings by this Company

Range of in-line pressure reducing valves with either chromium plated DZR brass bodies, with manually adjustable outlet pressure ranges between 2.8bar to 3.2bar. Compression connections to be used with copper pipe EN1057 only. Maximum working inlet pressure: 16.0 bar. Maximum operating temperature: 85°C.

Section:

2200 Valves

Section Subtitle:

Pressure reducing.

WRAS Approval Number:

241204736

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm compression & 22mm compression.

Marking:

TS, WRAS, flow arrow, CR on body, EN1254-2 & size etched on compression nut.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

44160

Product Images

Approval Holder:

Toolstation Ltd.

Company Name

Toolstation Ltd.

Address

Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of adjustable, pilot operated pressure reducing control valves with ductile iron bodies (blue epoxy coated). The products are supplied with auxiliary stainless-steel tubing, fittings, strainer, spherical valve and DZR pilot valve, DZR electrically actuated spherical valve. Maximum inlet supply pressure 16.0 bar. Maximum outlet pressure between 2.0 bar – 12.5 bar. Maximum operating temperature 80°C.

Section:

2205 Valves

Section Subtitle:

Pressure reducing, pilot operated.

WRAS Approval Number:

250912702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN40 - DN400 flanged.

Marking:

Zhuzhou Southern Valve Co.,Ltd. and product information on data plate. Logo, size and flow arrow on body.

Installation Requirements:

R001

Expiry date:

29/09/2030

Model:

ZYX741X.

Product Images

Approval Holder:

Zhuzhou Southern Valve Co.,Ltd.

Company Name

Zhuzhou Southern Valve Co.,Ltd.

Address

No. 5 High-tech Industrial Zone Zhuzhou City, Hunan Province

Postcode

412007

Country

China

View All Listings by this Company

Range of pilot operated, adjustable, pressure reducing control valves with blue epoxy coated ductile iron bodies. The valves are supplied with a pilot valve, three spherical valves and a needle valve. Maximum supply pressure 16.0 bar. Outlet pressure setting is adjustable in the range of 2.0 – 12.0 bar. Maximum operating temperature 80°C. Above ground use only.

Section:

2205 Valves

Section Subtitle:

Pressure reducing, pilot operated.

WRAS Approval Number:

2206386

Size:

DN65, DN80, DN100, DN125, DN150, DN200

Marking:

Aalberts logo "Pegler", model and technical info on rivetted data plate. Size and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

5A2106 PRVX4 DN65, 5A2107 PRVX4 DN80, 5A2108 PRVX4 DN100, 5A2109 PRVX4 DN125, 5A2110 PRVX4 DN150 & 5A2111 PRVX4 DN200.

Product Images

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company