Section Code 2260 : Spherical, metal.
Back To Directory Sections`2420` range of in-line key operated spherical valves with DZR brass bodies, incorporating chromium plated DZR brass balls, EPDM `O`-rings and a PTFE seat. Maximum working pressure 16.0 bar. Maximum operating temperature 90°C
Stand pipe arrangement incorporating an inline spherical valve, Y-pattern strainer connected to a RPZ valve via flexible stainless steel braided hose with a spherical valve at the outlet which requires a key to operate. The product is encased within a steel housing. Maximum working pressure 10.0 bar. Cold water use only.
Range of inline spherical valves with either a butterfly handle (1WMP147 model) or a single lever (1BPA014 & 1BPA021 models), nickel plated brass bodies, chromium plated brass ball, PTFE seats and EPDM ‘O’-rings. For use with Irish copper pipe. Maximum working pressure 16.0 bar (1WMP147 model), 25.0 bar (1BPA014 & 1BPA021 models). Maximum operating temperature 85°C
Range of servicing valves with lever, extended lever and tee type operating members, brass or nickel-plated brass bodies (the PB 550 DR models are DZR brass), chromium plated brass ball and PTFE seats. Maximum working pressure 16.0 bar (PB350, PB350LS, PB350EL & PB350T models), 25.0 bar (PB500 & PB550 models). Maximum operating temperature 99°C.
Range of spherical valves with stainless steel bodies and balls with PTFE. Having one end connection incorporating a press fitting connection (The press fitting is achieved by use of a press fitting tool) with single lever operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 100ºC.
‘Instantor’ range of lever operated spherical valves with brass bodies and balls (brushed chrome plated), incorporating PTFE seats and EPDM ‘o’ rings. For use with imperial Irish copper pipe (manufactured to IS EN 1057). Maximum working pressure 16 bar. Maximum operating temperature 85°C
Range of spherical valves with chromium plated brass bodies and ball and PTFE seats. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
Range of angled spherical valves with lever operating member, brass body and chromium plated ball. The 1230 & 1251 models have a brushed chrome finish. Model 1251 incorporates a stainless-steel strainer. Models 1230 & 1240: maximum working pressure 35.0 bar. Models 1251: maximum working pressure 55.0 bar. Maximum operating temperature 90°C
Lever operated angled spherical valve with brass body and chromium plated brass ball, also with EPDM ‘O’-ring and EPDM seal. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.
Range of in-line lever operated spherical valves with stainless steel bodies, stainless steel ball and PTFE seats. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Series IVR 220 range of spherical valves with brass bodies, chromium plated brass ball and EPDM ‘O’ rings and PTFE seats. Maximum working pressure 32.0 bar. Maximum operating temperature 100°C.
Range of lever operated spherical valves with brass bodies and chrome plated brass ball. Model 7214335-1 is supplied with a drain off. Maximum working pressure 10.0 bar, Maximum operating temperature 85˚C.
Range of spherical valves with nickel plated brass bodies, DZR Brass bodies & brass balls, PTFE seats and lever or butterfly operating members. Maximum working pressure 25.0 bar. Maximum operating temperature 100˚C
‘EURO-SFER’ Series of in-line lever or butterfly operated spherical valves with brushed chromium plated brass bodies, chromium plated brass ball and PTFE seat. Maximum working pressure: Art. 1700, 1710, 1722, 1711 & 6523 models: ¼” to ½” = 64.0 bar, ¾” to 1¼” = 50.0 bar, 1½” to 2” = 40.0 bar, 2½” to 4” = 25.0 bar. Art. 1720 & 1721 models: ¼” to ½” = 64.0 bar, ¾” to 1” = 50.0 bar. Art. 6523 model: ¼” to ⅜” = 64.0 bar, ¾” to 1¼” = 50.0 bar, 1½” to 2” = 40.0 bar, 2½” to 4” = 25.0 bar. Art. 6348, 6354 & 6366 models: ¼” to ⅜” = 64.0 bar. Maximum operating temperature 99°C.
Range of in-line screwdriver operated spherical valves, with brass bodies, chromium plated brass ball and NBR (1002ES & 5082 models) or EPDM (3006A model) ‘O’-rings. Maximum working pressure 5.5 bar. Maximum operating temperature 85°C
Range of servicing valves with brass bodies, chrome plated brass ball and PTFE seats. The products are available with a lever operating member with either red or blue PVC sleeves. For use with copper tube manufactured to EN1057:2006(+A1:2010) Maximum working pressure 25.0 bar. Maximum operating temperature 85°C
Wondervalve®Lite range of lever (L suffix models) or screwdriver operated spherical valves with brass bodies and chrome plated brass balls and PTFE seats. The valves incorporate either a 4, 6, or 8l/min flow regulator (see model section). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of spherical valves having brass bodies and PTFE seats with either blue or red lever or butterfly type handles. Maximum working pressure 30.0 bar. Maximum operating temperature 85°C
Range of angled spherical valves with a brass body (plain brass or chrome plated - see model), brass ball with EPDM ’O’-rings and gaskets and a dome type operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
Range of spherical valves with DZR brass bodies, chrome plated brass balls, EPDM ‘O’ rings and PTFE seat. Threaded ends: maximum working pressure 25.0 bar. Compression ends: maximum working pressure 16.0 bar. Press-fit ends: maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Range of spherical servicing valves having either natural (CP5R models) or nickel plated (CP12 models) brass bodies and EPDM ‘O’-rings and can be lever type or screwdriver operated. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with brushed chrome plated brass bodies and ball PTFE gaskets. Having either aluminium or steel lever type handles. Maximum working pressures: CIM 10: 60.0 bar for ¼”; ⅜”; ½”; ¾”; 1”, 50.0 bar for 1¼”, 40.0 bar for 1½”, 2”, 25.0 bar for 2½”, 3” and 4”. CIM 11 – 12: 60.0 bar for ¼”; ⅜”; ½”, 50.0 bar for ¾”; 1”, 40.0 bar for 1¼”, 32.0 bar for 1½”, 2”, 20.0 bar for 2½”, 3” and 4”. CIM 14 – CIM 14M: 60.0 bar for ¼”, ⅜”; ½”, 45.0 bar ¾”, 1”, 35.0 bar 1¼”, 32.0 bar 1½; 30.0 bar 2”, 16.0 bar for 2½”, 3” and 4”. Maximum operating temperature 100°C.
Wondervalve®Lite range of lever (L suffix models) or screwdriver operated spherical valves with brass bodies and chrome plated brass balls and PTFE seats. The valves incorporate either a 4, 6, or 8l/min flow regulator (see model section). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Wondervalve®Lite range of lever or screwdriver operated spherical valves with brass bodies and chrome plated brass balls and PTFE seats. The valves incorporate either a 4, 6, or 8l/min flow regulator (see model section). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of spherical valves with DZR brass bodies, chrome plated brass balls, EPDM ‘O’-rings and PTFE seat. Above ground use only. Threaded ends: maximum working pressure 25.0 bar. Compression ends: maximum working pressure 16.0 bar. Press-fit ends: maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of lever operated (EXPORT, EXPORT LD and EXPORT PLUS models) or butterfly handle (EXPORT /A models) spherical valves with chromium plated brass bodies, chromium plated brass balls and PTFE seals. LD suffix models have a lockable handle. Maximum working pressures: ¼” - ¾”: 50 bar, 1” - 1¼”: 40.0 bar, 1½” - 2”: 32.0 bar, 2½”- 4”: 25.0 bar. Maximum operating temperature 99°C.
Range of inline or angled screwdriver or lever operated spherical valves with brass (L-1 & L-2 suffix models only) or chromium plated brass body and ball, EPDM ‘O’-rings. The S0273-1, S0273-2, S0274L-110/115/120, S0233L-2 & S0233BH-2 models also incorporate PTFE seats. The S0233BH-1 & BH-2 models also incorporate a tee handle. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of lever operated spherical valves with chromium plated brass bodies with brass balls and PTFE seats. Maximum working pressure 25.0 bar. Maximum operating pressure 100°C.
Spherical valve with nickel plated brass body, chromium plated brass ball and PTFE gaskets. Maximum working pressure 50.0 Bar. Maximum operating temperature 85°C.
Range of in-line, angled or ‘T’ type spherical valves with chromium plated brass, nickel plated brass, brass or DZR brass bodies and brass ball, EPDM ‘O’-rings/Washers and PTFE Seats, models are screwdriver or lever operated. Maximum working pressures: M30220000P model: 40.0 bar. M30150000DZRP, M30220000DZRP, M30150000LVP, M30150000, M30150000P, & M30220000 models: 25.0 bar. All other models are 10.0 bar. Maximum working temperature 99°C.
Range of lever operated spherical valves with brass bodies, balls and PTFE seats and a double check valve assembly (verified by test, suitable for backflow protection against Fluid Category 3). Maximum working pressure 10 bar. Maximum operating temperature 60°C.
Range of lever operated (R250D & R250W models) or butterfly handle (R251W models) spherical valves with brass bodies (R250D models) or chrome plated brass bodies (all models) incorporating brass balls and PTFE seats. Maximum working pressure: ¼” – 42.0 bar. ⅜”, ¼”, ½”, ¾” 1”, 1¼”, 1½”, 2” – 35.0 bar. 2½”, 3”, 4” – 28.0 bar. Maximum operating temperature 60°C.
Lever operated spherical valve with brass body, brass ball and PTFE seals. Supplied with an end cap. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of spherical valves with brass bodies, EPDM o rings and lever type operated members. For use with PEX/AL/PEX pipe. Manufactured TO UNI EN ISO 21003 multi-layered Maximum working pressure 5 bar. Maximum operating temperature 60°C
ART Range of in-line, angled or ‘T’ type spherical valves with chromium plated brass, brass or DZR brass bodies and brass ball, EPDM ‘O’-rings/Washers and PTFE Seats, models are screwdriver or lever operated. Maximum working pressure 10.0 bar. Maximum working temperature 99°C.
Jet in-line lever operated spherical valves with brushed chromium plated brass bodies, chromium plated brass ball and PTFE seat. 2½” = 25.0 bar. Maximum operating temperature 99°C.
Range of in-line lever or butterfly operated spherical valves with brushed chromium plated brass bodies, chromium plated brass ball and PTFE seat. Maximum working pressure: K6566 JET BBV21 LEVER OPBSPPALL models: ¼” -½” = 64.0 bar, K656 JET BBV21 LEVER OPBSPPBALL Models 2½” - 4” = 25.0 bar. Art. K8912, K8913 & K6568 models: ¼” to ⅜” = 64.0 bar. Maximum operating temperature 99°C.
Range of PUSHTITE inline spherical valves with either a butterfly handle (PTWMV model) or a single lever (PT12BV & PT34BV models), nickel plated brass bodies, chromium plated brass ball, PTFE seats and EPDM ‘O’-rings. For use with Irish copper pipe. Maximum working pressure 16.0 bar (PTWMV model), 25.0 bar (PT12BV & PT34BV models). Maximum operating temperature 85°C
Aladdin Easyfit isolator valve with a stainless steel body and self cutting blade to enable a connection pressurised or wet systems. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical servicing valves having either natural (870228 models) or nickel plated (961159, 837973, 845187 & 845188 models) brass bodies and EPDM ‘O’-rings and can be lever type or screwdriver operated. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of quarter turn lever or butterfly handle operated spherical valves with brass bodies and chrome plated brass balls (51, 51CE & 52/3BF models) or DZR brass bodies and chrome plated DZR brass balls (51F & 51CRFW models), PTFE seats and packing. The 51F & 52/3BF models incorporate a stainless steel filter and EPDM ‘O’-rings, (the strainer is integral to the ball on the 52/3BF models). The 51, 51CE, 52/3BF & 51CRFW models are nickel plated. Maximum working pressures 51F: ½” to 1” = 25.0 bar, 1¼” = 16.0 bar. 51: ½” to ¾” = 40.0 bar, 1” - 2” = 32.0 bar. 51CE: ½” to 1” = 28.0 bar, 1¼” - 2” = 20.0 bar. 52/3BF: ¾” = 42.0 bar, 1” = 35.0 bar. 51CRFW: 15 to 28mm compression = 16.0 bar. Maximum operating temperature 90°C.
Continuous circulation spherical valve with brass body and plastic ball with lever type operating member. The product incorporates a screw in drain off valve on the side of the valve. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.
Range of in-line, angled or ‘T’ type spherical valves with chromium plated brass, nickel plated brass, brass or DZR brass bodies and brass ball, EPDM ‘O’-rings/Washers and PTFE Seats, models are screwdriver or lever operated. Maximum working pressures: BVAL201200 models: 25.0 bar. All other models are 10.0 bar. Maximum working temperature 99°C.
Range of screwdriver operated spherical valves with chromium plated brass body and ball. Maximum working pressure 16 bar. Maximum operating temperature 85°C.
Range of spherical valves with brushed chrome plated brass bodies and ball, incorporating EPDM ‘o’ rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Isolation valve with a brass body (chrome plated) and ball, PTFE seal and EPDM ‘O’-rings. Maximum working pressure 10 bar. Maximum operating temperature 85°C
Range of spherical valves with brushed chromium plated brass bodies, PTFE seats and either lever or butterfly type operating members. Maximum working pressures: 15mm to 28mm = 30.0 bar. 35mm – 54mm = 25.0 bar. Maximum operating temperature 99°C.
Range of in-line servicing valves (brass or nickel-plated brass body and ball) with EPDM gaskets and either a screwdriver or lever operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of DZR brass bodied spherical valves with a chromium plated brass ball, PTFE seats and washers, as well as EPDM ‘O’-rings and washers. Maximum working pressure 40.0 bar. Maximum operating temperature 100°C.
Spherical valve with an angled brass body, brass ball and PTFE seat. Maximum working pressure 10.0 bar. Maximum operating temperature 75°C
Range of spherical valves with brushed chromium plated brass bodies, PTFE seats and either lever or butterfly type operating members. Maximum working pressures: 15mm to 28mm = 30.0 bar. 35mm – 54mm = 25.0 bar. Maximum operating temperature 99°C.
Range of spherical servicing valves having either natural (CP5R models) or nickel plated (CP12 models) brass bodies and EPDM ‘O’-rings and can be lever type or screwdriver operated. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of servicing valves with lever and tee type (T suffix models) operating members, nickel-plated brass bodies (PS550/PS500T models) or DZR brass (PS 550DR/PS550DRT models), chromium plated brass ball and PTFE seats. The valves incorporate gunmetal bodied ‘X press’ pressfit end connections with EPDM ‘O’-rings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
Range of in-line servicing valves nickel-plated brass body and ball with EPDM gaskets and either a screwdriver or Butterfly operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of lever operated spherical valves with a brass body and ball, and PTFE seats. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C
Eres range of in-line lever operated spherical valves with nickel plated brass bodies, nickel plated brass ball and PTFE seals. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with brass bodies and balls and PTFE seats. With either lever or T handles. Maximum working pressure: DN 8, DN 10, DN 15 – 50.0 bar. DN 20, DN 25 – 40.0 bar. DN 32, DN 40 – 30.0 bar. DN 50 – 25.0 bar Maximum operating temperature 90ºC.
Floreg range of in-line lever operated spherical valve with a DZR brass body (brushed chrome plated) and ball. The product incorporates a stainless-steel mesh strainer and a flow regulator. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of lever or screw driver operated in-line spherical valves (chromium plated brass body), brass ball and EPDM sealing ring. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Aladdin Easyfit isolator valve with a stainless steel body and self-cutting blade to enable a connection to pressurised or wet systems. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of in-line screwdriver and lever operated spherical valves with chromium plated brass bodies and balls, EPDM seals and ‘sharkbite’ push fit end connections. Maximum working pressure 10.0 Bar. Maximum operating temperature 90°C.
Range of Warrior spherical servicing valves having either natural (CXC models) or chrome plated (CP models) brass bodies and EPDM ‘O’-rings and can be lever type or screwdriver operated. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of screwdriver operated spherical valves with a brass body and ball, PTFE seat and either NBR ‘O’-rings (0020012770 inline model) or EPDM rubber ‘O’-rings and washer (4000120555 angled model). Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.
Range of in-line servicing valves (brass or nickel-plated brass body and ball) with EPDM gaskets and either a screwdriver or lever operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
In-line and angled (42147100, 42193700 & 42193900 models) screwdriver operated spherical valves with DZR brass or chromium plated DZR brass bodies, brass ball, EPDM ‘O’-rings and PTFE seats. 421 prefix models can also have EPDM seats. The 4361500 model incorporates a stainless steel filter. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
Range of in-line spherical valves (brushed chrome DZR brass body) with lever (250400) or butterfly (250300 & 29284) operating members, DZR brass ball (chromium plated brass) and PTFE seats and washers. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.
In line brass bodied isolation valve having PTFE seals and stainless steel strainer. Incorporates two approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with nickel plated brass bodies with either lever or butterfly operating member, brass ball and PTFE seat. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
“In-Line Thermal Disinfection Unit” comprising of a manual diverter incorporating two spherical valves controlling both the hot and cold flow. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of lever operated spherical valves with brass bodies and chromium plated brass balls, incorporating PTFE seats and EPDM o rings. Maximum working pressure 40.0 bar for ½” Maximum working pressure 25 bar for ¾” & 1” Maximum working pressure 20 bar for 1 ¼”, 1 ½”, & 2” Maximum operating temperature 85°C.
Range of servicing valves with lever and tee type (T suffix model) operating members, nickel-plated brass bodies (PT550 models) or DZR brass (PT550DR/PT550DRT models), chromium plated brass ball and PTFE seats. The valves incorporate Tectite Pro DZR brass push-fit fittings for use with copper tube (manufactured to BS 2871). Maximum working pressures and operating temperatures: 15mm - 28mm: 20.0 bar @ 30°C, 16.0 bar @ 65°C & 10.0 bar 100°C. 32mm - 54mm: 16.0 @ 30°C, 10.0 bar @ 65°C & 6.0 bar @ 90°C.
Range of servicing valves with lever operating members, DZR brass bodies, chromium plated brass ball and PTFE seats. The valves incorporate ‘VSH SudoPress’ copper press-fit fittings with EPDM ‘O’ rings for use with copper pipe. Joints are achieved by the use of a press fitting tool. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of DZR brass bodied spherical valves with a chromium plated brass ball, PTFE seats and washers, as well as EPDM ‘O’-rings and washers. Maximum working pressure 40.0 bar. Maximum operating temperature 100°C.
Range of lever operated spherical valves with nickel plated brass (ART Models) or DZR brass (FFDZR) bodies, a chrome plated brass ball, PTFE seats and packing and EPDM ‘O’-rings. Maximum working pressure 16.0 Bar (ART Models) or 40.0 Bar (FFDZR models). Maximum operating temperature 100°C.
Range of screwdriver operated spherical valves with brass bodies (Models JMYG-004 and JMYG-082) and chromium plated brass bodies (Models JMYG-005, JMYG-037, JMYG-006 and JMYG-007) and chrome plated brass balls and NBR seats. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.
Range of spherical valves with brass bodies, chromium plated brass or stainless-steel balls and EPDM ‘O’-rings, available with a variety of operating members. 15mm-18mm models have a chrome plated brass ball and 22mm-54mm models have a stainless-steel ball. For use with stainless steel pipe, carbon steel pipe or copper pipe. Maximum working pressure 25.0 bar. Maximum operating temperature 85ºC.
Range of brass bodied spherical valves with a PTFE seat. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Angled ball valve with a DZR brass body, chromium plated brass ball, EPDM ‘O’-ring and PTFE seats. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Aangled spherical valve (screwdriver operated) with DZR brass bodies, PTFE seats and NBR seals. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.
In-line and angled screwdriver operated spherical valves with DZR brass or chromium plated DZR brass bodies, brass ball, EPDM ‘O’-rings and PTFE or EPDM seat. . Some models incorporate a stainless steel filter. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
Range of spherical valves with brass bodies (chrome plated), brass ball, PTFE seats and EPDM ‘O’-rings. For use with Polybutylene pipe (manufactured to BS7291 part 2) and PEX pipe (manufactured to BS7291 part 3) with a maximum working pressure of 10.0 bar. Cold water use only and from October 2020 with a maximum operating temperature of 85°C. For use with copper pipe (manufactured to EN 1057) with a maximum working pressure of 10.0 bar. Maximum operating temperature of 85°C.
Range of in-line servicing valves (brass or nickel-plated brass body and ball) with EPDM gaskets and either a screwdriver or lever operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical servicing valves having either natural (870228 models) or nickel plated (961159, 837973, 845187 & 845188 models) brass bodies and EPDM ‘O’-rings and can be lever type or screwdriver operated. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with brass bodies, chromium plated brass or stainless-steel balls and EPDM ‘O’-rings, available with a variety of operating members. 15mm-18mm models have a chrome plated brass ball and 22mm-54mm models have a stainless-steel ball. For use with stainless steel pipe, carbon steel pipe or copper pipe. Maximum working pressure 25.0 bar. Maximum operating temperature 85ºC.
Range of spherical valves with brass bodies, chromium plated brass or stainless-steel balls and EPDM ‘O’-rings, available with a variety of operating members. 15mm-18mm models have a chrome plated brass ball and 22mm-54mm models have a stainless-steel ball. For use with stainless steel pipe, carbon steel pipe or copper pipe. Maximum working pressure 25.0 bar. Maximum operating temperature 85ºC.
AI-373 range of lever handle operated brass bodied spherical valves having a chromium plated brass ball and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.
Screwdriver operated spherical valves with DZR brass bodies, PTFE seats and NBR seals. The fittings incorporate two approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of spherical valves with single lever or butterfly operating member, bronze bodies, bronze ball (models 229F-15, 229F-20, 229F-25 229F-32, 229F-40 & 229F-50) all other models have a brass ball and PTFE seats. Maximum working pressure 40.0 bar (model: 229F-15, 229F-20, 229F-25, 229F-32, 229F-40, 229F-50) Maximum working pressure 32.0 bar (model: 254-8, 254-10, 254-15, 254-20, 254-25) Maximum working pressure 25.0 bar (model: 254-32, 254-40, 254-50, PB6715, PB6722, PB6728) Maximum working pressure 16.0 bar (model: 254-65, 254-80, 254-100) Maximum operating temperature 85 ºC.
Range of spherical valves with nickel plated brass bodies, DZR Brass bodies & brass balls, PTFE seats and lever or butterfly operating members. Maximum working pressure 25.0 bar. Maximum operating temperature 100˚C
Range of lever operated spherical valves with nickel plated brass bodies, a chrome plated brass ball, PTFE seats and packing and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Screwdriver operated angled spherical valve with a brass body and ball, PTFE seats and EPDM ‘O’-rings. The product also incorporates a connection for a filling link to fill a heating circuit. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C.
Range of screwdriver operated spherical valves with chromium plated brass bodies (Models JMYG-005, JMYG-037, and chrome plated brass balls and NBR seats. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.
Range of lever operated spherical valves incorporating brass bodies, brass or stainless-steel balls, PTFE seats and EPDM ‘O’ rings. Pressfit connections are for use with copper pipe. Maximum working pressure 16.0 bar. Maximum operating temperature 85.0°C
Range of spherical valves incorporating DZR brass bodies & balls and PTFE seats. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C
Spherical valve intended for use on sanitary inlet / outlet connections on boiler circuits, with a brass body and PTFE seat. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C.
Screwdriver operated angled servicing valve with brass body, brass ball, PTFE seats and EPDM ‘O’-rings. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C.
Range of in-line, angled or ‘T’ type spherical valves with chromium plated brass, nickel plated brass, brass or DZR brass bodies and brass ball, EPDM ‘O’-rings/Washers and PTFE Seats, models are screwdriver or lever operated. Maximum working pressures: 10.0 bar. Maximum working temperature 99°C.
Range of spherical servicing valves having nickel plated ( brass bodies and EPDM ‘O’-rings and can be lever type or screwdriver operated. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of in-line servicing valves (brass or nickel-plated brass body and ball) with EPDM gaskets and a screwdriver operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of lever and butterfly handle spherical valves with chrome plated brass bodies, chrome plated brass ball and PTFE seats. Maximum working pressure 40.0 bar. Maximum operating temperature 85°C.
Range of lever operated servicing valves for use with BS EN 1057 R250 half hard copper tube, incorporating brushed chromium plated DZR brass bodies and ball, and PTFE seats. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of brass bodied or chrome plated brass bodied spherical valves, with a brass ball and EPDM ‘O’-rings. All fittings are to be used with PE-x pipe (manufactured to BS7291-3), PB pipe (manufactured to BS7291-2) and copper pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Electrically actuated 3 way diverting valve incorporating brass bodies with NBR ‘O’-rings and PTFE seats. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical valves incorporating brass bodies (various finishes) with EPDM ‘O’-rings or PTFE seats depending on model variant. Models can be straight or angled. Maximum working pressure 25.0 bar (models 10.61092.015.CP5R-8510 & 10.61092.015.CP12-8510). Maximum working pressure 16.0 bar (all other models). Maximum operating temperature 85°C.
Range of spherical valves incorporating UPVC or ABS bodies and EPDM seats. Maximum working pressure of sizes 3/8" - 2" and 16mm - 63mm is 16.0 bar. Maximum working pressure of sizes 2½" - 4" and 75mm - 110mm is 10.0 bar. Cold water use ony.
Range of ball valves incorporating brass bodies, stems & balls, PTFE seats and butterfly type or single lever operating members. Maximum working pressure 40.0 bar. Maximum operating temperature 95˚C.
Range of lever operated servicing valves for use with BS EN 1057 R250 half hard copper tube, incorporating brushed chromium plated DZR brass bodies and ball, and PTFE seats. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of in-line isolation valves with a nickel plated brass (11-1046 (1046) range) or DZR brass body (all other models), chromium plated DZR brass ball (1601 (¼ ” to 2”), 2045 (¼” to 2”) & 1046 ranges), SS304 ball (1601 (¾” to 2”) & 2045 (¼” to 2”) ranges) or chromium plated brass ball, and PTFE seats. The products are supplied with either a single lever (1601, 2045 & 1046 range), single lever with extension stem kit, (1601 & 2045 range), single lever with lockable handle (1601 & 2045 range), butterfly operating members (1601 & 2045 range), T-handle, short black lever (1601 & 2045 range) or screwdriver operated (1046 range). The 11-1015 (2045) range and 11-1046(1046) range is for use with copper pipe manufactured to EN1057. Maximum working pressure 40.0 bar (1601 range), 25.0 bar (2045 & 1046 range). Maximum operating temperature 85°C.
Range of spherical valves incorporating gunmetal bodies and EPDM ‘O’-rings. Valves can be either handle operated or actuator operated 24v or 230v and with or without return spring (see model). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical ball valves with single lever or T-handle operating members, brass bodies (nickel plated) and chromium plated brass ball and PTFE washers. Maximum working pressure CP90 models = 40.0 bar. CP89 models = 25.0 bar. Maximum operating temperature 85.0°C
Spherical valves incorporating bronze bodies with lever operating members, chromium plated brass ball and PTFE seat. Maximum working pressure 25.0 bar, Maximum operating temperature 85°C.
Spherical valves incorporating bronze bodies with lever operating members, chromium plated brass ball and PTFE seat. Maximum working pressure 25.0 bar, Maximum operating temperature 85°C.
Spherical valves incorporating bronze bodies with lever operating members, chromium plated brass ball and PTFE seat. Maximum working pressure 25.0 bar, Maximum operating temperature 85°C.
Spherical valves incorporating bronze bodies with lever operating members, chromium plated brass ball and PTFE seat. Maximum working pressure 25.0 bar, Maximum operating temperature 85°C.
Spherical valves incorporating bronze bodies with lever operating members, chromium plated brass ball and PTFE seat. Maximum working pressure 25.0 bar, Maximum operating temperature 85°C.
Range of spherical valves with single lever or butterfly operating member, bronze bodies, bronze ball. Maximum working pressure 40.0 bar Maximum operating temperature 85 ºC.
Range of spherical servicing valves having either natural (UW24905 models) or nickel plated (UW24809, UW24906, UW249833 & UW24934 models) brass bodies and EPDM ‘O’-rings and can be lever type or screwdriver operated. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of in-line servicing valves (brass or nickel-plated brass body and ball) with EPDM gaskets and a screwdriver operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Spherical valves incorporating bronze bodies with lever operating members, chromium plated brass ball and PTFE seat. Maximum working pressure 25.0 bar, Maximum operating temperature 85°C.
‘Aladdin Easyfit Isolator’, lever operated isolation valve with a stainless steel body, brass plug, chrome plated brass spindle, EPDM boot gasket and seals, NBR ‘O’-rings, and a stainless steel cutter to enable a connection to a pressurised or wet system. For use on 28mm diameter copper pipe manufactured to EN1057 only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Spherical valves incorporating bronze bodies with lever operating members, chromium plated brass ball and PTFE seat. Maximum working pressure 25.0 bar, Maximum operating temperature 85°C.
Range of spherical ball valves with single lever or T-handle operating members, brass bodies (nickel plated) and chromium plated brass ball and PTFE washers. Maximum working pressure IN90 models = 40.0 bar. IN89 models = 25.0 bar. Maximum operating temperature 85.0°C
Range of electrically actuated ball valves incorporatingstainless steel bodies and ball with PTFE seat. Various closure options are available depending on model. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.
Angled spherical valve with brass body, brass ball (chrome plated), and screwdriver operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with lever operating member, stainless steel bodies, chromium plated stainless steel ball and PTFE seat. Maximum working pressure 66.0 bar. Maximum operating temperature 100°C.
Spherical valves incorporating bronze bodies with lever operating members, chromium plated brass ball and PTFE seat. Maximum working pressure 25.0 bar, Maximum operating temperature 85°C.
Spherical valves incorporating bronze bodies with lever operating members, chromium plated brass ball and PTFE seat. Maximum working pressure 25.0 bar, Maximum operating temperature 85°C.
Spherical valves incorporating bronze bodies with lever operating members, chromium plated brass ball and PTFE seat. Maximum working pressure 25.0 bar, Maximum operating temperature 85°C.
Spherical valve incorporating a DZR brass body, chromium plated brass ball & single lever operating member, with push-fit connections for use with copper, PE-X (class B1) and Polybutylene (class B1) pipe. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical valves incorporating brushed chome plated brass bodies, ball and PTFE seats. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C
Flomasta Range of brass bodied or chrome plated brass bodied spherical valves, with a brass ball and EPDM ‘O’-rings. All fittings are to be used with PE-x pipe (manufactured to BS7291-3), PB pipe (manufactured to BS7291-2) and copper pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of lever operated spherical valves incorporating brass bodies and brass ball (various finishes) to be used with PEX pipe (manufactured to BS7291 part 3), Polybutylene Pipe (manufactured to BS7291 Part 2) and copper pipe (manufactured to EN1057). Maximum working pressure 6.0 bar (for PEX and Polybutylene pipe). Maximum working pressure of 20.0 bar (for copper pipe). Maximum operating temperature 95˚C.
Range of motorised spherical valves with stainless steel bodies, ball and PTFE seals Maximum working pressure 16.0 bar. Maximum operating temperature 99˚C.
Range of spherical valves with nickel platedbrass bodies, nickel plated brass balls and EDPM ‘O’-rings with a lever type operating member. Maximum working pressure 50.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with a brass body brass ball (chrome plated), PTFE gaskets, EPDM ‘O’-rings and a single lever operating member. Maximum working pressure 10.0 bar. Maximum working temperature 100°C.
Range of inline screwdriver or lever operated servicing valves with nickel plated brass bodies, nickel plated ball, EPDM ‘O’-rings and PTFE Seats. The S0232BH-1 and S0232BH-2 models also incorporate a (metal) lever. The S0280L-1 and S0280L-2 models are full bore insolation valves. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical ball valves with lever or tee operating member, brass bodies, chromium plated brass ball and PTFE seat. Maximum working pressure 50.0 bar: ¼” (DN 8), 3/8” (DN 10) & ½” (DN 15). Maximum working pressure 40.0 bar: ¾” (DN 20) & 1” (DN 25). Maximum working pressure 30.0 bar: 1¼” (DN 32) & 1½” (DN 40). Maximum working pressure 25.0 bar: 2” (DN 50). Maximum operating temperature 60°C.
Range of spherical valves with bronze bodies (brushed chrome plated), brass ball and PTFE seals. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of in line spherical valves incorporating chrome plated brass bodies, chrome plated brass ball, NBR ‘O’-rings and PTFE seals. Model 825212 incorporates a single lever operating member, models 825015 and 8250152 have no operating members. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of spherical valves incorporating brass bodies and balls (nickel plated), EPDM rubber ‘O’-rings, PTFE seats and red or blue coloured lever type operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of in-line, angled or ‘T’ type spherical valves with chromium plated brass, nickel plated brass, brass or DZR brass bodies and brass ball, EPDM ‘O’-rings/Washers and PTFE Seats, models are screwdriver or lever operated. Maximum working pressures:10 bar Maximum working temperature 99°C.
Range of screwdriver operated spherical valves with brass bodies (Models PBRVAL364050 and PBRVAL364043 and chromium plated brass bodies (Models PBRVAL364052, PBRVAL364047, PBRVAL364055 and PBRVAL364058) and chrome plated brass balls and NBR seats. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.
Range of electrically operated motorised spherical valves incorporating brass or stainless-steel bodies, stainless steel balls and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Spherical valve with brass body and ball, PTFE seat, EPDM and NBR ‘O’-rings. The valve incorporates a branch which is intended to connect to the primary circuit of a combination boiler. Maximum working pressure 10.0 Bar. Cold water use only.
Range of lever operated spherical valves with a brass body and ball, and PTFE seats. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C
Spherical valve incorporating a brass body and ball, PTFE seat, EPDM and NBR ‘O’-rings. Maximum working pressure 10.0 bar. Cold water use only.
Range of spherical valves incorporating DZR brass bodies and balls (nickel plated), EPDM ‘O’-rings, PTFE seats and red or blue coloured lever type operating members. Maximum working pressure 16.0 bar for compression models Maximum working pressure 40.0 bar for 1¼”-2” RP Female & pressfit models Maximum working pressure 50.0 bar ½”-1” RP Female & pressfit models. Maximum operating temperature 85°C.
Range of spherical valves incorporating brass bodies and balls (chrome plated), EPDM ‘O’-rings and PTFE seats. Model 124-3200 has a maximum working pressure 50.0 bar. Models 124- 3201 and 124-3202 have a maximum working pressure 40.0 bar. Model 124-3203 has a maximum working pressure 25.0 bar. Models 124-3204 and 124-3205 have a maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Spherical valve incorporating a brass body (brushed chrome), chrome plated brass ball, ‘y’-patterned strainer, PTFE seats and single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with nickel plated DZR brass bodies with either red or blue, lever or butterfly operating member, brass ball and PTFE seat. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.
Range of spherical valves incorporating brass bodies (model Cim287RB5 nickel plated) brass balls (chrome plated), PTFE seats, EPDM ‘O’-rings and butterfly handle operating members. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Range of spherical valves incorporating brass bodies and balls (chrome plated), EPDM ‘O’-rings and PTFE gaskets. Products are supplied with either red or blue butteryfly operating member or screw driver operated. Maximum working pressure 50.0 bar. Maximum operating temperature 100°C.
Range of spherical valves incorporating chrome plated brass bodies and balls, and PTFE seats. The products are supplied with either butteryfly or lever handles. Maximum working pressures - see model. Maximum operating temperature 100°C.
Range of spherical valves with brass bodies, brass ball (chrome plated) and PTFE gaskets. Products are supplied with either blue or red lever or butterfly type operating members. Maximum working pressure 50.0 bar (½ models). Maximum working pressure 40.0 bar (¼”, ¾” and 1” models). Maximum working pressure 25.0 bar (1¼” models). Maximum working pressure 16.0 bar (1½” to 4” models). Maximum operating temperature 100°C. Models added March 2022: Maxmimum working pressure of 10.0 bar. Maxmimim operating temperature 60°C (models AI-360115 & 124-3001)
‘Jet’ Series of in-line lever or butterfly operated spherical valves with brushed chromium plated brass bodies, chromium plated brass ball and PTFE seat. Maximum working pressure: ¼” to ½” = 64.0 bar, ¾” to 1¼” = 50.0 bar, 1½” to 2” = 40.0 bar, 2½” to 4” = 25.0 bar. Maximum operating temperature 99°C.
Spherical valves incorporating bronze bodies with lever operating members, chromium plated brass ball and PTFE seat. Maximum working pressure 25.0 bar, Maximum operating temperature 85°C.
Range of angled servicing valves with brushed chrome plated DZR brass bodies and ball.The product incorporates a stainless steel strainer and a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Smart water meter monitor with an integrated motorised shut off valve, piezo electric ultrasonic tranducer and pressure sensor, plastic housing and silicone ‘O’-rings. Maximum working pressure 10 bar. Maximum operating temperature 85°C.
Range of spherical valves with DZR brass bodies, chromium plated brass ball, PTFE seats and EPDM rubber ‘O’-ring. The products also incorporate a ‘Y’- Patterned stainless steel strainer. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.
Isolation valve incorporating a brass body (chromium plated) and brass ball (chromium plated). Maximum working pressure 10.0 bar. Cold water use only.
Range of lever operating spherical valves incorporating brass bodies (nickel plated), brass ball (chromium plated) and PTFE seat. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
‘Aladdin Easyfit Isolator Pro’ valve incorporating a stainless steel body and self cutting blade to enable a connection to a pressurised or wet systems. For use with copper pipe to BS2871 – EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Spherical valve incorporating brass bodies (various finishes) with EPDM ‘O’-rings or PTFE seats depending on model variant. Models can be straight or angled. Maximum working pressure 16.0 bar Maximum operating temperature 85°C.
Range of spherical valves withDZR brass bodies and EPDM ‘O’-rings and various operating members (see model). Maximum working pressure 32.0 bar (15mm). Maximum working pressure 25.0 bar (35mm). Maximum operating temperature 85°C.
Quarter turn sanitry ball valve incorporating a brass body and ball, EPDM ‘O’-ring and PTFE seat. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C.
Range of lever operating spherical valves incorporating brass bodies, chrome plated brass ball, PTFE seals and NBR ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of angled servicing valves with brushed chrome plated DZR brass bodies and ball.The product incorporates a stainless steel strainer and a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Spherical valves incorporating bronze bodies with lever operating members, chromium plated brass ball and PTFE seat. Maximum working pressure 25.0 bar, Maximum operating temperature 85°C.
Range of angled isolation valves with brass bodies (brushed chrome plated), for use with copper tube manufactured to EN1057. The inlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of spherical valves with bronze bodies, brass ball and PTFE seals. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
In-line spherical valve incorporating a nickel plated brass body, chromium plated brass ball, NBR rubber ‘O’-rings and single lever operating member. To be used with copper pipe manufactured to EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with bronze body, DZR brass ball (sizes ½” to 1”) and bronze ball (sizes 1 ¼” to 2”) PTFE seat and single lever operating member. Maximum working pressure 25.0 bar. Maximum operating temperature 85˚C
Range of servicing valves incorporating brass bodies (chrome plated or natural brass) The P2290 & P2290SI models are spherical valves with brass balls. The 201210 A-80 model is quarter turn with an EPDM seat and ‘O’-ring. The NF721 & NF721SI models are quarter turn with a NBR seat and EPDM ‘O’-ring. The 00711 A-80 is quarter turn with a NBR seat and ‘O’-rings. Maximum working pressure 16.0 bar. Cold water use only.
Range of lever operated spherical valves incorporating brass bodies (chrome plated), brass balls and PTFE seals. Maximum working pressure 40.0 bar. Maximum operating temperature 100°C.
Flow through valve with a brass body and EPDM ‘O’-rings, incorporating a spherical valve and a separate drain port/plug. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Isolation elbow, incorporating brass bodies (chrome plated) and brass ball (chrome plated), EPDM O-rings and a PTFE seal. The product is supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 50°C
Angled valve (chromium plated brass body), NBR rubber seals and a dome type operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C
Range of in-line, “T” type or angled spherical valves incorporating brass bodies and brass ball, EPDM ‘O’-rings/Washers, PTFE seats and single lever or butterfly lever operating members. Some models incorporate port or pressure gauge. Models 0516/03DCVR1, 0516/03DCVR2 & 0516/04TR1 incorporate approved check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3). Maximum working pressures 10.0 bar Maximum operating temperature 100°C.
Range of brass bodied, straight and angled two and three-port spherical valves. Some models incorporate a screw-down pattern drain valve. Products incorporate a chrome-plated brass ball and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical valves (nickel plated) brass bodies with single lever operating members, (chromium plated) brass ball and PTFE seat. Maximum working pressure 40.0 bar (Models 124-1027 CST, 124-1028 CST and 124-1029 CST) Maximum working pressure 25.0 bar (Models 124-1030 CST and 124-1031 CST) Maximum working pressure 16.0 bar (Models 124-1032 CST and 124-1033 CST) Maximum operating temperature 85°C.
Range of angled isolation ball valves incorporating brushed chrome plated DZR brass bodies, DZR brass ball (chrome plated), stainless steel strainer and approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of pressfit connection spherical valves incorporating DZR brass bodies, PTFE seat and packing, NBR ‘O’-rings and various operating members: lever, lever lockable, T-handle and butterfly. For use with copper pipe (manufactured to BS EN 1057), stainless steel pipe (manufactured to BS EN 10312) and carbon steel pipe (ISO 4200 Groupe 1 Series 3). Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
Range of spherical valves incorporating stainless steel strainers, chrome plated brass ball, housed within DZR brass bodies with a brushed chrome finish. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Range of straight, angled, tee and Y shaped isolation valves incorporating brass bodies, NBR ‘O’-rings or PTFE seats depending on model variant. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of screwdriver operated servicing valves incorporating brass bodies and chromium plated brass ball, nylon seats and EPDM seals. Maximum working pressure 7.0 bar. Maximum operating temperature 99°C.
Spherical valves incorporating bronze bodies with lever operating members, chromium plated brass ball and PTFE seat. Maximum working pressure 25.0 bar, Maximum operating temperature 85°C.
Range of spherical valves with DZR brass bodies, chromium plated brass balls and PTFE seats with lever, lockshield or T-type operating members. Maximum working pressures: 22mm – 28mm = 32.0 bar and 42mm – 54mm = 25.0 bar. Maximum operating temperature 85°C.
Range of lever operated spherical valves with a brass body and ball (brushed chrome plated), and PTFE seals. Maximum working pressure 42.0 bar (¼”, 3/8”, ½”, ¾” models) Maximum working pressure 32.0 bar (1”, 1 ¼”, 1 ½”, 2” models) Maximum working pressure 28.0 bar (2 ½” model) Maximum working pressure 16.0 bar (3” & 4” models) Maximum operating temperature 85°C
Range of straight, angled, tee and Y shaped isolation valves incorporating brass bodies, NBR ‘O’-rings or PTFE seats depending on model variant. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Combined spherical valve and strainer with a brushed chromium plated brass body and stainless-steel filter. The strainer incorporates single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.
A range of screwdriver operated spherical valves with brass bodies and brass ball, EDPM ‘O’-rings and fibre washers. Maximum working pressure 16.0 bar, Maximum working temperature 85°C.
Range of inline and angled screwdriver or lever handle operated spherical valves with (chromium plated) brass bodies, chromium plated brass ball, NBR ‘O’-rings. For use with copper pipe manufactured to EN 1057 Maximum working pressure 16.0 bar at 30°C and 5 bar at 99°C Maximum working pressure 6.0 bar. Maximum operating temperature 90°C (model TX480 only)
Range of spherical valves with either chrome plated brass, nickel-plated brass, or brass bodies (See models) with a chrome plated brass ball and PTFE seats. Models TS-1212, TS-1202, TS-1101, TS-1201 and TS-1111 have lock shields, models TS-1271, TS-3012, TS-3001, TS-2001 and TS-2042 have lever operating members Maximum working pressure 25 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Spherical valve incorporating bronze body, stainless steel ball and PTFE seats and seals. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of spherical valves incorporating nickel plated brass bodies, chrome plated brass balls & Tee type operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
ISIS range of single lever and T type operated spherical valves with DZR brass body and ball (chrome plated), and PTFE seals. Maximum working pressure 40.0 bar (¼”, 3/8”, ½”, ¾”, 1”, 1 ¼”, 1 ½”, & 2” models) Maximum working pressure 10.0 bar (2 ½”, 3” & 4” models) Maximum operating temperature 100°C
Range of spherical valves with brass bodies (brushed chrome plated), (red coloured) lever operating members and chrome plated brass ball. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with brass bodies, brass ball, PTFE washer and seats, incorporating a butterfly handle operating member (R254 models) or single lever operating member (R254DL models). Maximum working pressure 42.0 bar (¼ - ½” models). Maximum working pressure 35.0 bar (¾” - 2” models). Maximum operating temperature 99°C.
Range of spherical valves with single lever or butterfly operating member, bronze bodies, bronze ball. Maximum working pressure 40.0 bar Maximum operating temperature 85 ºC.
Range of quarter turn, lever handle or butterfly operated spherical valves with nickel plated brass bodies, chrome plated brass balls and PTFE seals. For use with copper pipe BS EN 1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of lever operated spherical valves incorporating brass bodies (nickel plated), brass balls (chrome plated) and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with DZR brass bodies, chrome plated brass ball and PTFE seats with tee-handles or lever type or extension stem type operating members. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Range of spherical valves with brushed chrome brass bodies, chrome plated brass ball incorporating a PTFE seat and NBR O rings. For use with EN1057 copper pipe. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C
Range of spherical isolation valves incorporating brass bodies (nickel plated), brass ball (chrome plated), brass stem and EPDM ‘O’-rings (screwdriver operated or T-type handle). For use with copper pipe (EN1057). Maximum working pressure 16.0 bar (model 10.60982.015.CP12-8510) Maximum working pressure 25.0 bar (model 10.62022.015.CP12-8510) Maximum working pressure 40.0 bar (models 10.61062.015.CP12-8510 & 10.61062.022.CP12-8510) Maximum operating temperature 85°C.
Range of inline or angled ball valves with brass or nickel-plated brass bodies, chrome plated brass balls and a lever, butterfly or lockshield operating members. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
Range of spherical valves with DZR brass bodies, chrome plated brass ball and PTFE seats with tee-handles or lever type or extension stem type operating members. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Range of electrically operated motorised spherical valves incorporating brass or stainless-steel bodies, stainless steel balls and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of spherical valves incorporating brass bodies (brushed chrome), chrome plated brass ball and PTFE seat. Maximum working pressure 30.0 bar. Maximum operating temperature 85°C.
In-line spherical valve with a chrom eplasted DZR brass body, brass ball and EPDM ‘O’-rings, incorporating a single check valve cartridge (verified by test, suitable for fluid catergory 2) with a lever operating member. To be used with copper pipe manufactured to EN1057. verified Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of quarter turn, lever handle or butterfly operated spherical valves with nickel plated brass bodies, chrome plated brass balls and PTFE seals. For use with copper pipe BS EN 1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of in-line servicing valves nickel-plated brass body and ball with EPDM gaskets and either a screwdriver or lever operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical servicing valves with nickel plated brass bodies and EPDM ‘O’-rings and can be lever type or screwdriver operated. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical isolation valves incorporating brass bodies (nickel plated), brass ball (chrome plated), brass stem and EPDM ‘O’-rings (screwdriver operated or T-type handle). For use with copper pipe (EN1057). Maximum working pressure 25.0 bar (model 5059340245713) Maximum working pressure 40.0 bar (models 05316984 & 05316960) Maximum operating temperature 85°C.
Range of quarter turn, lever handle or butterfly operated spherical valves with nickel plated brass bodies, chrome plated brass balls and PTFE seals. For use with copper pipe BS EN 1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of spherical isolation valves incorporating brass bodies (nickel plated), brass ball (chrome plated), brass stem and EPDM ‘O’-rings (screwdriver operated ). For use with copper pipe (EN1057). Maximum working pressure 25.0 bar (model 76696) Maximum working pressure 40.0 bar (models 77164& 68376) Maximum operating temperature 85°C.
Range of quarter turn, lever handle or butterfly operated spherical valves with nickel plated brass bodies, chrome plated brass balls and PTFE seals. For use with copper pipe BS EN 1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of spherical isolation valves incorporating brass bodies (nickel plated), brass ball (chrome plated), brass stem and EPDM ‘O’-rings (screwdriver operated or T-type handle). For use with copper pipe (EN1057). Maximum working pressure 40.0 bar Maximum operating temperature 85°C.
Range of straight, angled, tee and Y shaped isolation valves incorporating brass bodies, NBR ‘O’-rings or PTFE seats depending on model variant. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of straight, angled, tee and Y shaped isolation valves incorporating brass bodies, NBR ‘O’-rings or PTFE seats depending on model variant. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of spherical isolation valves incorporating brass bodies (nickel plated), brass ball (chrome plated), brass stem and EPDM ‘O’-rings (screwdriver operated or T-type handle). For use with copper pipe (EN1057). Maximum working pressure 16.0 bar (model 999698) Maximum working pressure 25.0 bar (model496877) Maximum working pressure 40.0 bar (models 570500 & 570622) Maximum operating temperature 85°C.
Range of lever operated spherical valves with nickel plated brass bodies incorporating chromium plated brass balls. For use with copper pipe. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.
Range of ball valves with nickel plated brass bodies, chrome plated brass ball, PTFE seats, and either lever or T handle operating members (see models). Maximum working pressure 16.0 to 64.0 Bar (Size & model dependant, see models) Maximum working temp 85°C
Spherical valve with DZR brass body and butterfly operating member, for use with copper tube (manufactured to EN 1057). The valve incorporates a drain valve. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C
Angled spherical valve with brushed chrome plated brass body, chrome plated, brass ball, and single lever operating member. The product incorporates a stainless steel filter. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of lever operated spherical valves with brass bodies (nickel plated), chrome plated brass balls, and EPDM ‘O’-rings. Compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of screwdriver operated spherical valves incorporating brass bodies, brass ball, and EPDM ‘O’-rings. Compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with Brushed chrome plated brass body and chrome plated brass ball. Some models incorporate an actuator (please refer to model). Please refer to model for maximum working pressure. Maximum operating temperature 100°C
Lever operated spherical valve with brushed chrome brass body, EPDM O-rings and PTFE gaskets. The valve incorporates a stainless steel filter with EPDM O-ring and brass filter plug. The compression connection is to be used with for polyethylene pipe PE100 to EN12201. Maximum working pressure 25.0 bar. Cold water use only.
Range of lever or butterfly operated spherical valves with nickel plated brass bodies and brass ball with PTFE seat. Valves to be used with EN1057 copper pipe. Maximum working pressure: 25.0 Bar Maximum operating temperature: 85°C
Range of spherical valves with brass (CW617N) or DZR brass (CW511L) bodies (chrome plated, nickel plated or without plating - see model), chrome plated brass ball and a range of different operating members (see model). Compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of ball valves with nickel plated brass bodies, chrome plated brass ball, PTFE seats, and either lever or T handle operating members (see models). Maximum working pressure 16.0 to 64.0 Bar (Size & model dependant, see models) Maximum working temp 85°C
Range of in-line, angled or ‘T’ type spherical valves with chromium plated brass bodies and brass ball, EPDM ‘O’-rings/Washers and PTFE Seats, models are screwdriver or lever operated. Maximum working pressures: 30834 model: 40.0 bar. 30833 model: 25.0 bar. All other models are 10.0 bar. Maximum working temperature 99°C.
Range of lever operated spherical valves with nickel plated brass or DZR brass bodies, chrome plated brass ball and PTFE seat. Maximum working pressure is 40.0 bar for ¼” to 2” and 25.0 bar for 2½” to 4”. Maximum operating temperature 100°C.
Range of spherical valves (inline, angled and tee) with chrome plated brass bodies and ball. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C
Range of spherical valves with nickel plated brass bodies, chromium plated brass balls, PTFE seals, NBR and/or FKM ‘O’-rings. 140, 140M, 141 & 141M series models incorporate a stainless-steel strainer. 140 & 141 series models also incorporate a magnet. The 121 & 122 series models are 3-way valves. Maximum working pressure: See PN in brackets under model. Maximum operating temperature: Cold water use only.
Manifold spherical valve with DZR brass body and ball (chrome plated), incorporating a single lever type operating members and a single check valve assembly (verified by test as suitable for backflow protection against Fluid Category 2). For use with with copper pipe manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with a brass body (chrome plated), stainless steel ball, and PTFE seats and seals. The P472CPBH.1 model is supplied with a copper olive, the P472CPBH.2 model with a brass olive. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of lever operated spherical valves with brass bodies (nickel plated), chrome plated brass balls, and EPDM ‘O’-rings. Compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with a brass body, chrome plated brass ball, and lever operating member. Maximum working pressure 25.0 bar. Maximum operating temperature100°C.
Range of screwdriver operated spherical valves incorporating brass bodies, brass ball, and EPDM ‘O’-rings. Compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical isolation valves incorporating brass bodies (nickel plated), brass ball (chrome plated), brass stem and EPDM ‘O’-rings (screwdriver operated or T-type handle). For use with copper pipe (EN1057). Maximum working pressure 16.0 bar (model 999698) Maximum working pressure 25.0 bar (model 496877) Maximum working pressure 40.0 bar (models 570500 & 570622) Maximum operating temperature 85°C.
Range of spherical valves with nickel plated brass bodies, DZR Brass bodies & brass balls, PTFE seats and lever or butterfly operating members. Maximum working pressure 25.0 bar. Maximum operating temperature 100˚C
Manifold spherical valve with DZR brass body and ball (chrome plated), incorporating a single lever type operating members and a single check valve assembly (verified by test as suitable for backflow protection against Fluid Category 2). For use with with copper pipe manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with nickel plated brass bodies, chromium plated brass balls, PTFE seals, NBR and/or FKM ‘O’-rings. 140, 140M, 141 & 141M series models incorporate a stainless-steel strainer. 140 & 141 series models also incorporate a magnet. The 121 & 122 series models are 3-way valves. Maximum working pressure: See PN in brackets under model. Maximum operating temperature: Cold water use only.
Range of spherical valves with brass (K65281, K65282, K65283, K65301, K65302, K65303, K65291, K65292, K65293, K65311, K65312 & K65313) or DZR brass (K64783, K64784, K64793, K64794, K64763, K64764, K64773, K64774) bodies (chrome plated, nickel plated or without plating - see model), chrome plated brass ball and a range of different operating members (see model). Compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with various operating members, brass bodies, brass balls, FKM ‘O’-rings or EPDM ‘O’-rings (S84W series only) and PTFE seats. Maximum working pressure 40.0 bar. Maximum operating temperature 85°C.
Range of lever operated spherical valves with nickel plated brass (30726 & 30727 Models) or DZR brass (38838, 38839 & 38840) bodies, a chrome plated brass ball, PTFE seats and packing and EPDM ‘O’-rings. Maximum working pressure 16.0 Bar (30726 & 30727 Models) or 40.0 Bar (38838, 38839 & 38840 models). Maximum operating temperature 100°C.
Range of lever operated spherical valves with nickel plated brass bodies incorporating chromium plated brass balls. For use with copper pipe. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.
Range of quarter turn, lever handle or butterfly operated spherical valves with nickel plated brass bodies, chrome plated brass balls and PTFE seals. For use with copper pipe BS EN 1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of full bore spherical valves with single lever, lockable lever or butterfly operating members, nickel plate brass bodies and chrome plated, brass ball, PTFE seats and NBR O-rings.
Range of lever operated spherical valves with brass bodies (nickel plated), chrome plated brass balls, and EPDM ‘O’-rings. Compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of lever operated spherical valves with brass bodies (nickel plated), chrome plated brass balls, and EPDM ‘O’-rings. Compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with various operating members, brass bodies, brass balls, FKM ‘O’-rings or EPDM ‘O’-rings (S84W series only) and PTFE seats. Maximum working pressure 40.0 bar. Maximum operating temperature 85°C.
Spherical valve (lever operated) with a DZR brass body, brass ball and PTFE seat. The second outlet incorporates two approved check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3). There is a test port located between the check valve cartridges. For use with copper pipe manufactured to BS EN 1057. Maximum working pressure 16.0 Bar
Non-metallic materials and components comply with BS6920 at 65°C
Range of ‘IBall Vortex’ flow through valves with brass body and EPDM ‘O’-rings incorporating a plastic spherical valve and a drain tap. Maximum working pressure: 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of spherical valves with nickel plated brass bodies, chromium plated brass balls, PTFE seals, NBR and/or FKM ‘O’-rings. incorporates a stainless-steel strainer. Also incorporate a magnet. Maximum working pressure: See PN in brackets under model. Maximum operating temperature: Cold water use only.
Range of spherical valves with brass bodies and chrome plated brass ball, PTFE washer and EPDM `O` ring and various operating methods. Maximum working pressure 10.0 or 40 bar (see model).
Non-metallic materials and components comply with BS6920 at 85°C
Lever operated spherical flow through valve with brass body and chrome plated brass ball, PTFE seals and EPDM `O` ring. The product incorporates a drain valve. Maximum working pressure 16 bar.
Non-metallic materials and components comply with BS6920 at 65°C
Range of spherical valves with a single lever or ‘T’ handle operating member. The products have a DZR brass body and a chrome plated DZR brass ball, except for the models with the ‘-OT’ suffix, models have (nickel-plated brass bodies) and chrome plated brass ball. The products are supplied with various end connections (see model). Maximum working pressures: 15mm to 28mm = 40 Bar 35mm = 25 bar 42mm to 54mm = 16 bar (All models). 42 to 54mm = 10 Bar (4E05, 4E05-OT, 4E06 and 4E06-OT models) Maximum operating temperature 40.0°C
Range of quarter turn, lever handle or butterfly operated spherical valves with nickel plated brass bodies, chrome plated brass balls and PTFE seals. For use with copper pipe BS EN 1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of lever operated spherical valves with bronze bodies, PTFE seals and chromium plated brass ball. Maximum working pressure 20.0 bar. Maximum operating temperature 99°C.
Range of lever operated spherical valves with DZR brass (286W range) or nickel plated brass (289 range) bodies, chromium plated brass ball, PTFE seats and EPDM ‘O’-rings. Maximum working pressure 25.0 bar (286W range), 40.0 bar (289 range). Maximum operating temperature 85°C (286W range), 99°C (289 range).
Range of isolation valves with nickel plated brass bodies, chrome plated brass balls and EPDM O-rings. Compression connection to be used with copper pipe EN1057. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of spherical valves with nickel plated brass bodies, chrome plated brass balls and EPDM O-rings. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of spherical valves with nickel plated brass bodies, chome plated brass balls and EPDM O-rings. Connection to be used with copper pipe EN1057. Maximum working pressure 16 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of in-line spherical valves with brass bodies, chromium plated brass ball, NBR rubber ‘O’-rings and single lever operating members. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of lever operated spherical valves with nickel plated brass or DZR brass bodies, chrome plated brass ball and PTFE seat. Maximum working pressure is 40.0 bar for ¼” to 2” and 25.0 bar for 2½” to 4”. Maximum operating temperature 100°C.
Range of lever operated spherical valves with brass bodies (nickel plated), chrome plated brass balls, and EPDM ‘O’-rings. Compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with a single lever or ‘T’ handle operating member. The products have a DZR brass body and a chrome plated DZR brass ball, except for the models with the ‘-OT’ suffix, models have (nickel-plated brass bodies) and chrome plated brass ball. The products are supplied with various end connections (see model). Maximum working pressures: 15mm to 28mm = 40 Bar 35mm = 25 bar 42mm to 54mm = 16 bar (All models). 42 to 54mm = 10 Bar (4E05, 4E05-OT, 4E06 and 4E06-OT models) Maximum operating temperature 40.0°C
Range of lever operated spherical valves with DZR brass bodies, chromium plated brass ball, PTFE seats and EPDM ‘O’-rings. Maximum working pressure 25.0 bar Maximum operating temperature 85°C
Non-metallic materials and components comply with BS6920 at 85°C
Range of lever operated spherical valves with nickel plated brass bodies incorporating chromium plated brass balls. For use with copper pipe. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.
Range of spherical valves with brass bodies (nickel plated) and brass (chromium plated) balls, PTFE seats and NBR o-rings. Maximum working pressure: ½” to 1” = 40.0 bar, 1¼” to 2” = 25.0 bar. Cold water use only.
Range of press fit spherical valves with DZR brass bodies and balls. For use with copper pipe (EN1057) and stainless steel pipe (EN10312) Maximum working pressure 17.2 bar. Maximum operating temperature 100°C.
Range of spherical valves with chrome plate brass bodies, chrome plated brass balls and PTFE seats. For use with motorized actuator (not included) Maximum working pressure: ½” to 1” = 40.0 bar and 1¼” to 2” = 25.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Screwdriver operated spherical servicing valve with chromium plated brass body, brass ball and EPDM O-rings. Maximum working pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of spherical valves with bronze bodies, incorporating PTFE seats and chromium plated brass balls. Maximum working pressure 40.0 bar. Maximum operating temperature 100°C.
In-line spherical valve with a chrome plated DZR brass body, brass ball and EPDM ‘O’-rings, incorporating a single check valve cartridge (verified by test, suitable for fluid catergory 2) with a lever operating member. To be used with copper pipe manufactured to EN1057. verified Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
‘Export’ range of lever or butterfly handle spherical valves with nickel plated brass bodies, chrome plated brass balls, PTFE seats, and NBR ‘O’-rings. Compression connection models are for use with copper pipe (manufactured to BS EN1057). Maximum working pressures: see models.
Non-metallic materials and components comply with BS6920 at 60°C
Range of press fit spherical valves with DZR brass bodies and balls. For use with copper pipe (EN1057) and stainless steel pipe (EN10312) Maximum working pressure 17.2 bar. Maximum operating temperature 100°C.
Range of press fit spherical valves with DZR brass bodies and balls. For use with copper pipe (EN1057) and stainless steel pipe (EN10312) Maximum working pressure 17.2 bar. Maximum operating temperature 100°C.
Range of pressfit connection spherical valves incorporating DZR brass bodies, PTFE seat and packing, NBR ‘O’-rings and various operating members: lever, lever lockable, T-handle and butterfly. For use with copper pipe (manufactured to BS EN 1057), stainless steel pipe (manufactured to BS EN 10312) and carbon steel pipe (ISO 4200 Groupe 1 Series 3). Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
Range of inline spherical valves, (nickel plated brass bodies), chrome plated brass balls, PTFE seats and washers with lock-shield, single lever or T-type operating members. Maximum working pressure: ¼” to 1” = 40.0 bar, 1¼” to 2” = 32.0 bar, 2½” to 3” = 25.0 bar, 4” = 20.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Pre-piping arrangement consisting of a framework fitted with a range of spherical valves with brass bodies and balls, PTFE seats and EPDM ‘O’-rings. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
A range of in-line, lever operated spherical isolation valves with chrome plated brass bodies & chrome plated balls, stainless steel wire filters and plastic flow regulators. Compression connections to be used with copper pipe EN1057 only. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C except for models AI-811215 & AI-81121518 CST with temperatures of 85°C
Range of inline spherical valves (nickel plated brass bodies) incorporating chrome plated brass balls, PTFE seats and washers with single lever, T-type or lockshield operating members. Maximum working pressure 16.0 bar Maximum operating temperature 85°C
Non-metallic materials and components comply with BS6920 at 85°C
Range of lever operated spherical valves with stainless steel bodies and chrome plated brass ball. Maximum working pressure 68.0 bar
Non-metallic materials and components comply with BS6920 at 80°C
Range of inline spherical valves with brushed chromium plated brass bodies and balls, PTFE seats and NBR ‘O’-rings. The valves are intended to be actuated by a motor (not supplied), but can also be screwdriver operated. Maximum working pressures: ¼” to 1” = 40.0 bar, 1¼” = 32.0 bar, 1½” to 2½” = 30.0 bar and 3” = 25.0 Bar. Maximum operating temperature 85°C.
Range of inline spherical valves with brushed chromium plated brass bodies and balls, PTFE seats and NBR ‘O’-rings. The valves are intended to be actuated by a motor (not supplied), but can also be screwdriver operated. Maximum working pressures: ¼” to 1” = 40.0 bar, 1¼” = 32.0 bar, 1½” to 2½” = 30.0 bar and 3” = 25.0 Bar. Maximum operating temperature 85°C.
In-line spherical valve with a chrome eplasted DZR brass body, brass ball and EPDM ‘O’-rings, incorporating a single check valve cartridge (verified by test, suitable for fluid category 2) with a lever operating member. To be used with copper pipe manufactured to EN1057. verified Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of lever operated spherical valves with brass bodies (nickel plated), chrome plated brass balls, and EPDM ‘O’-rings. Compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Boss Range of inline spherical valves (nickel plated brass bodies) incorporating chrome plated brass balls, PTFE seats and washers with single lever, T-type or lockshield operating members. Maximum working pressure 16.0 bar Maximum operating temperature 85°C
Non-metallic materials and components comply with BS6920 at 85°C
Spherical valves incorporating bronze bodies with lever operating members, chromium plated brass ball and PTFE seat. Maximum working pressure 25.0 bar, Maximum operating temperature 85°C.
Range of lever operated spherical valves with nickel-plated brass bodies and ball with a PTFE seat. Maximum working pressure 10.0 Bar
Non-metallic materials and components comply with BS6920 at 65°C
Range of spherical valves with stainless steel bodies, chrome plated brass ball and PTFE seats. Maximum working pressure 68.9Bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of lever operated spherical valves with stainless steel bodies and ball with PTFE seats. Maximum operating pressure 16.0 bar (2019S) or 63.0 bar (2013ND & 2006SC-FW).
Non-metallic materials and components comply with BS6920 at 85°C
Range of spherical valves with single lever operating member, bronze bodies, bronze ball. Maximum working pressure 40.0 bar BVBZ Maximum working pressure 32.0 bar BVBZF Maximum operating temperature 85 ºC.
Range of lever operated spherical valves with DZR brass (ABF15A range) or nickel plated brass (ABF15 range) bodies, chromium plated brass ball, PTFE seats and EPDM ‘O’-rings. Maximum working pressure 25.0 bar (ABF15A range), 40.0 bar (ABF15 range). Maximum operating temperature 85°C (ABF15A range), 99°C ABF15 range).
Range of spherical valves with single lever or butterfly operating member, bronze bodies, bronze ball (models 4211-15 , 4211-20, 4211-25, 4211-32, 4211-40 & 4211-50) all other models have a brass ball and PTFE seats. Maximum working pressure 40.0 bar. Maximum operating temperature 85 ºC.
Range of spherical valves with stainless steel bodies, chrome plated brass ball and PTFE seats. Maximum working pressure 68.9Bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of quarter turn, lever handle or butterfly operated spherical valves with nickel plated brass bodies, chrome plated brass balls and PTFE seals. For use with copper pipe BS EN 1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of lever operated spherical valves, (brass bodies - nickel or chrome plated), incorporating PTFE seats and a chrome plated brass ball. Maximum working pressure 25.0 Bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of push-fit spherical valves with a brass body (15HSV model only) or chromium plated brass bodies (all other models), chromium plated brass ball and EPDM ‘O’- rings. SV suffix models are screwdriver operated; all other models are lever operated. For use with copper tube (manufactured to BS EN 1057), PB pipe (manufactured to BS7291-2) or PE-X pipe (manufactured to BS7291-3). Maximum working pressure and operating temperature: 12.5 @ 20°C, and 3.0 bar @ 92°C.
Range of stainless steel spherical valves, incorporating T-type or single lever operating members with a stainless steel ball and PTFE seats. Maximum working pressure 63.0bar
Non-metallic materials and components comply with BS6920 at 80°C
Range of stainless spherical valves, incorporating a stainless steel ball, PTFE seats and single ever operating members. Maximum working pressure 16.0 bar
Non-metallic materials and components comply with BS6920 at 80°C
Range of quarter turn, lever handle or butterfly operated spherical valves with nickel plated brass bodies, chrome plated brass balls and PTFE seals. For use with copper pipe BS EN 1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of lever operated spherical valves with stainless steel bodies and ball with PTFE seats. Maximum operating pressure 16.0 bar (CF-2EL) or 63.0 bar (CT-3D & CT-2LC).
Non-metallic materials and components comply with BS6920 at 85°C
Range of lever operated spherical valves with DZR brass bodies, chromium plated brass ball, PTFE seats and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of inline spherical valves, (nickel plated brass bodies), chrome plated brass balls, PTFE seats and washers with lock-shield, single lever or T-type operating members. Maximum working pressure: ¼” to 1” = 40.0 bar, 1¼” to 2” = 32.0 bar, 2½” to 3” = 25.0 bar, 4” = 20.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
In-line spherical valve with a chrom eplasted DZR brass body, brass ball and EPDM ‘O’-rings, incorporating a single check valve cartridge (verified by test, suitable for fluid catergory 2) with a lever operating member. To be used with copper pipe manufactured to EN1057. verified Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of brass bodied (nickel plated) spherical valves incorporating PTFE seats & chrome plated ball. Maximum working pressure 40.0 bar.
Range of brass or DZR brass spherical valves incorporating single lever operating members and a chrome plated brass ball. Model 0312A030307DC is an angled 90-degree valve which incorporates single check valve cartridges verified by test (suitable for backflow protection against Fluid Category 2 or 3). For use with EN1057 copper pipe. Maximum working pressure 10 bar. Maximum operating temperature 85°C.
Non-metallic materials and components comply with BS6920 at 85°C
Range of spherical valves with nickel plated brass bodies and brass balls, incorporating PTFE washers. R950W models are lever operated and R951W models have a butterfly operating member. Maximum working pressure is either 42.0 bar (up to and including ¾”) or 35.0 bar (up to and including 2”). Maximum operating temperature 85°C.
Non-metallic materials and components comply with BS6920 at 85°C
Range of lever operated, full bore spherical valves with brass bodies (brushed chrome) andchrome plated brass balls and a range of different operating members. Sizes ¼” to ½” have a maximum working pressure of 64.0 bar. Sizes ¾” to 2½” have a maximum working pressure of 40.0 bar. Cold water use only.
Range of stainless-steel spherical valves, incorporating a stainless-steel ball, PTFE seats and EPDM ‘O’-rings with single lever operating members. Maximum working pressure 63.0 Bar. Maximum operating temperature 23.0°C
“Ballofix®Lock” range of in-line hex key operated spherical valves with PTFE seals and EPDM ‘O’-rings. 3399300 & 3499300 models have a brass body. 3599300, 37199300 & 38199300 models have a DZR brass body. All models have a DZR brass ball (chromium plated). Maximum working pressures: 3399300, 3499300 and 3599300 models are 16.0 bar. 37199300 and 38199300 models are 25.0 bar. Maximum operating temperature 95°C.
‘3029’ range of lever operated spherical valves with chromium plated brass bodies and balls, incorporating PTFE seats and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 99°C.
Range of press fit spherical valves with DZR brass bodies and balls with EPDM O-Rings. Joints are achieved by the use of a press fitting tool. For use with Multi-layered Pert/Al/Pert pipe compliant to EN21003-2 Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
Range of quarter turn, lever handle or butterfly operated spherical valves with nickel plated brass bodies, chrome plated brass balls and PTFE seals. For use with copper pipe BS EN 1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of in-line, angled or ‘T’ type spherical valves with chromium plated brass bodies and brass ball, EPDM ‘O’-rings/Washers and PTFE Seats, models are screwdriver or lever operated. Maximum working pressure 10.0 bar. Maximum working temperature 99°C.
Range of in-line, angled or ‘T’ type spherical valves with chromium plated brass and brass ball, EPDM ‘O’-rings/Washers and PTFE Seats, models are screwdriver or lever operated. Maximum working pressures 10.0 bar. Maximum working temperature 99°C.
Range of spherical valves with brass bodies and stems, incorporating chrome plated brass ball and EPDM O-rings and single lever operating members. Maximum supply pressure 24.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Multi-operational spherical valve with DZR brass body, incorporating (chromium plated) brass balls and PTFE seats. The product incorporates two flow control levers and multiple outlet connections. Compression connection to be used with copper pipe EN1057 only. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of full-bore spherical valves with bronze bodies, PTFE seats incorporating redox coated brass ball and various operating members (see models). Maximum working pressure 40 Bar Maximum operating temperature 95°C
Range of full-bore spherical valves with a brass body (nickel plated), brass ball (chrome plated) and PTFE seats. All models are available as lever operated, 15-28mm sizes are also available with a butterfly handle. For use with copper pipe (manufactured to BS EN 1057). Maximum working pressure 25.0 bar. BS6920 85°C.
In line isolation valve with DZR brass body, DZR brass ball (chrome plated), and an EPDM inlet washer. The product incorporates two approved check valve cartridges, one either side of the spherical valve, verified by test (suitable for backflow protection against Fluid Category 3). Maximum working pressure 16.0 bar. BS6920 85°C.
Range of in-line, angled or ‘T’ type spherical valves with chromium plated brass bodies and brass ball, EPDM ‘O’-rings/Washers and PTFE Seats, models are screwdriver or lever operated. Maximum working pressure 10.0 bar. Maximum working temperature 99°C.
Range of in-line, angled or ‘T’ type spherical valves with chromium plated brass bodies and brass ball, EPDM ‘O’-rings/Washers and PTFE Seats, models are screwdriver or lever operated. Maximum working pressures 10.0 bar. Maximum working temperature 99°C.
Range of quarter turn, lever handle operated spherical valves with nickel plated brass bodies, chrome plated brass balls and PTFE seals. For use with copper pipe BS EN 1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of spherical valves incorporating DZR brass (CORE 171 AC) or nickel-plated brass (CORE 800 ) bodies and chromium plated brass balls. For use with copper to BS EN 1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of in-line lever or screwdriver operated spherical valves with DZR brass bodies (nickel plated) and brass balls (chromium plated), EPDM ‘O’-rings and PTFE seats. The ball can incorporate a plastic flow regulator, or a stainless-steel strainer (within a plastic housing) inserted through the side port. Compression models are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperatures: Spherical valves only and those incorporating a stainless-steel strainer: 85°C. Spherical valves incorporating a plastic flow regulator: 60°C.
Range of full-bore spherical valves with bronze bodies, PTFE seats incorporating redox coated brass ball and various operating members (see models). Maximum working pressure 40 Bar Maximum operating temperature 95°C
Range of lever operated spherical valves with DZR brass bodies. Incorporating a chrome plated DZR brass ball and PTFE seat. Maximum operating pressure 25.0 bar (models 425BZ) or 16.0 bar (models 537E). Maximum operating temperature 100°C.
Range of spherical valves incorporating a bronze body, brass or stainless-steel ball and single lever operating member. Maximum working pressure 25.0 bar.
Non-metallic materials and components comply with BS6920 at 82°C
Range of spherical valves incorporating a bronze body, brass ball and butterfly lever operating member. Maximum working pressure 25.0 bar.
Non-metallic materials and components comply with BS6920 at 82°C
Range of spherical valve with a brass body (chrome plated) and chrome plated brass ball, incorporating EPDM o-rings. Compression connection to be used with copper pipe EN1057. Maximum working pressure 16 Bar. Maximum operating temperature 85°C.
Range of single lever ball valves with stainless steel bodies, ball, EPDM O-rings and PTFE gaskets. The press fit connection is to be used with stainless steel pipe manufactured to EN 10312. Maximum working pressure 16 bar. Maximum operating temperature 85°C.
Range of lever or butterfly lever operated spherical valves, incorporating a nickel plated brass body and stainless steel ball, PTFE seats and NBR ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of TH profile pressfit brass bodied spherical valves with brass balls, EPDM O-rings and lever type operating members. Fittings for use with EN ISO 21003 Pert-al-Pert Multilayer pipe. Maximum working pressure 10 bar. Maximum operating temperature 95°C.
Range of spherical servicing valves with brass bodies and chrome plated brass balls, PTFE seats, FKM rubber ‘O’-rings and lever operating members. Maximum working pressure 40 bar. Cold water use only.
Range of quarter turn, lever handle or butterfly operated spherical valves with nickel plated brass bodies, chrome plated brass balls and PTFE seals. For use with copper pipe BS EN 1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of spherical valve with a brass body (chrome plated) and chrome plated brass ball, incorporating EPDM o-rings. Compression connection to be used with copper pipe EN1057. Maximum working pressure 16 Bar. Maximum operating temperature 85°C.
Range of quarter turn, lever handle operated spherical valves with nickel plated brass bodies, chrome plated brass balls and PTFE seals. For use with copper pipe BS EN 1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of servicing valves with chrome plated brass balls and brass bodies (chrome plated) with either lever operating or butterfly operating members (see models). Compression connection to be used with copper pipe EN1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85ºC.
Range of lever or butterfly operated spherical valves with brass or nickel-plated brass (CC617 and Arc89) or DZR brass bodies (CCDZR). Incorporating brass or nickel-plated brass (CC617 and Arc89 ) or DZR brass ball (CCDZR). For use with copper pipe BS EN 1057. Maximum working pressure 25.0 Bar. Maximum operating temperature 99.0°C
Range of lever or butterfly operated spherical valves with brass or nickel plate bodies and ball, (DZR brass body and ball on FFDZR prefix models). Maximum working pressure: Various – see model section. Maximum operating temperature 99.0°C
Pairs of angled spherical valves with DZR brass bodies (chrome plated), brass ball (chrome plated), stainless-steel strainer, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of lever or butterfly operated spherical valves with brass or nickel-plated brass. For use with copper pipe BS EN 1057. Maximum working pressure 25.0 Bar. Maximum operating temperature 99.0°C
Range of lever or butterfly operated spherical valves with brass or nickel plate bodies and ball. Maximum working pressure: Various – see model section. Maximum operating temperature 99.0°C
Range of spherical valves with single lever or butterfly operating member, bronze bodies, bronze ball. Maximum working pressure 40.0 bar. Maximum operating temperature 85 ºC.
Range of servicing valves with chrome plated brass balls and brass bodies (chrome plated) with lever operating members. Compression connection to be used with copper pipe EN1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85ºC.
Range of spherical ball valves with single lever or T-handle operating members, brass bodies (nickel plated) and chromium plated brass ball and PTFE washers. Maximum working pressure = 40.0 bar. Maximum operating temperature 85.0°C
Range of full-bore spherical valves with a brass body (nickel plated), brass ball (chrome plated) and PTFE seats. All models are available as lever operated, 15-28mm sizes are also available with a butterfly handle. For use with copper pipe (manufactured to BS EN 1057). Maximum working pressure 25.0 bar. BS6920 85°C.
Range of full-bore spherical valves with a brass body (nickel plated), brass ball (chrome plated) and PTFE seats. All models are available as lever operated, 15-28mm sizes are also available with a butterfly handle. For use with copper pipe (manufactured to BS EN 1057). Maximum working pressure 25.0 bar. BS6920 85°C.
Range of inline, T-piece or angled screwdriver operated spherical valves with brass or chrome plated brass bodies and ball, for use with copper pipe to BS EN 1057 and Stainless steel to EN 10312. Maximum working pressure 10.0 Bar Models 1GLB311NP-SD, 1GLB411NP-SD, 1GLB111, 1GLB121 – 16.0 Bar Maximum operating temperature 85°C
Range of spherical valves with stainless steel bodies, PTFE seats and silicone O-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.
Range of spherical valves with a brass body, brass ball, PTFE seats and lever type operating members. Maximum working pressure 40.0 Bar Maximum operating temperature 65.0°C
Range of angle valves (brass bodies – various finishes), incorporating non-rising spindle headworks with a dome type operating members and NBR O-rings and PTFE Seals. Maximum working pressure 10 bar. Maximum operating temperature – Cold Water Use
Electronically controlled spherical valve with smart water leakage shut off, incorporating ceramic pressure sensor, stainless steel ball and EPDM O-rings. Maximum working pressure 10 bar. Maximum operating temperature 85°C
Range of lever operated spherical valves with (nickel plated) brass bodies, incorporating chromium plated brass balls and PTFE seats. Max working pressure 32 bar. Max operating temperature 100℃.
Range of spherical valves with nickel plated brass bodies, chromium plated brass balls and various operating members (see models). Products incorporate EPDM O-rings and PTFE seats. Maximum working pressure ½” – 1” 30 bar, 1 ¼” – 2” 25 bar. Maximum operating temperature 100°C.
Range of spherical valves with DZR brass bodies, chrome plated DZR brass or stainless-steel balls, EPDM ‘O’ rings and PTFE seat. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of lever operated spherical valves with brass bodies (chromium plated), incorporating chromium plated balls and PTFE seats. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with nickel plated brass bodies, incorporating PTFE seats and chromium plated brass balls. Valves are operated by butterfly type handles. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with stainless steel bodies, chrome plated brass ball and PTFE seats. Maximum working pressure 68.9Bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of spherical valves with DZR brass bodies, chrome plated DZR brass or stainless-steel balls, EPDM ‘O’ rings and PTFE seat. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of lever or butterfly operated spherical valves with brass or nickel plate bodies and ball. Maximum working pressure: Various – see model section. Maximum operating temperature 99.0°C
Range of lever operated spherical valves with DZR brass or stainless-steel bodies and ball. Models beginning with ‘GP’ and ‘GPH’ are for use with copper pipes (manufactured to EN 1057). Models beginning with ‘GPMS’ and ‘GPHS’ are for use with stainless steel (SS316L) pipe (manufactured to EN 10312). Maximum working pressure 25.0 bar. Maximum operating temperature 85°C
Range of spherical valves incoporaintg either brass (CP5R models) or nickel plated (CP12 models) brass bodies with chrome plated brass ball and operated via lever, butterfly type handle or screwdriver slot. For use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical valves (nickel plated brass bodies), brass or stainless ball, and NBR ‘O’-rings. The compression connection is to be used with copper pipe EN1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with chrome plated brass bodies and chrome plated brass balls, incorporating PTFE seats. Maximum working pressure for model 340: 40.0 bar ¼”- 2” & 25.0 bar 2”- 4” Maximum working pressure for all other models 40.0 bar Maximum operating temperature: 100℃
Range of full port spherical valves with DZR brass bodies, chrome plated or (VIR REDOX) coated brass ball (see model). The products are either lever or handle operated (see model). The 33FFDRE models include a stem extension. Maximum working pressure 32.0 bar. Maximum operating temperature 100°C (wholesome water use), 130°C (closed circuit use only).
A Range of brass bodied, spherical ball valves incorporating a brass-balls, with PTFE seats and butterfly type operating members.
Page of 1
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
