Hyco Manufacturing Ltd. Approvals


#2004049

Range of water heaters incorporating a pressure relief valve pre-set at 6.0 bar. Maximum working pressure 5.5 bar. Maximum operating temperature 75ºC.

Section:
1380 Heaters
Section Subtitle:
Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2004049
Expiry date:
30/04/2025
Size:
½” BSP (M) X ½” BSP (M).
Marking:
Hyco on body. Product code and technical information on adhesive label on body.
Installation Requirements:
R001
Model:
SF10SS SF15SS SF1012SS SF1512SS
Factor:
Hyco Manufacturing Ltd.
Company Name
Hyco Manufacturing Ltd.
Address
Unit 1 & 2 Normandy Court, Express Way, West Yorkshire
Postcode
WF10 5NR
Phone
01924 225 200

View All Listings by this Company

Print This Approval


#1905409

Range of in-line adjustable (between 2.8 and 3.2 bar) pressure reducing valves with chrome plated DZR brass bodies and NBR ‘O’ rings. The valves incorporate test ports on the outlet side of the valve and a stainless-steel strainer. Maximum supply pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
1905409
Expiry date:
31/05/2024
Size:
15mm ½” BSP (F)
Marking:
HYCO, CR, FLOW ARROW, PN & DN ON BODY
Installation Requirements:
R001 R120
Model:
SF5 ADJUSTABLE PRESSURE REDUCING VALVES
Factor:
Hyco Manufacturing Ltd.
Company Name
Hyco Manufacturing Ltd.
Address
Unit 1 & 2 Normandy Court, Express Way, West Yorkshire
Postcode
WF10 5NR
Phone
01924 225 200

View All Listings by this Company
Manufacturer:
Ningbo Valtech Flow Control Co. Ltd.
Company Name
Ningbo Valtech Flow Control Co. Ltd.
Address
Room 610 New Oriental Times Building No.1130
Phone
0574-88001556

View All Listings by this Company

Print This Approval


#2209339

Manifold spherical valve with DZR brass body and ball (chrome plated), incorporating a single lever type operating members and a single check valve assembly (verified by test as suitable for backflow protection against Fluid Category 2). For use with with copper pipe manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2209339
Expiry date:
30/09/2027
Size:
15mm compression
Marking:
HYCO, CR and flow arrow on body.
Installation Requirements:
R001
Model:
‘HY003 15*15*1/2*1/2 manifold ball valve with check’.
Factor:
Hyco Manufacturing Ltd.
Company Name
Hyco Manufacturing Ltd.
Address
Unit 1 & 2 Normandy Court, Express Way, West Yorkshire
Postcode
WF10 5NR
Phone
01924 225 200

View All Listings by this Company

Print This Approval


#2304009

Range of wall mounted, electrically heated catering water boilers with inlet supply controlled via a solenoid valve. The water is discharged via a self-closing tap with single lever operating member. Maximum working pressure 10.0 Bar Maximum operating temperature 98.0°C

Section:
0060 Boilers
Section Subtitle:
Catering, Feed Cistern or Pressure.
WRAS Approval Number:
2304009
Expiry date:
30/04/2028
Size:
15mm compression
Marking:
Hyco Microboil on front panel. Model and product info on adhesive label on underside.
Installation Requirements:
R001 R040 R150
Model:
Microboil Smart: MS3W MS6W MS10W MS3SS MSS6S MS10SS
Manufacturer:
Hyco Manufacturing Ltd.
Company Name
Hyco Manufacturing Ltd.
Address
Unit 1 & 2 Normandy Court, Express Way, West Yorkshire
Postcode
WF10 5NR
Phone
01924 225 200

View All Listings by this Company

Print This Approval


#2311056

Range of undercounter water chillers with a stainless-steel cooling tank including a drain outlet. Maximum working pressure 3.0 Bar. Maximum operating temperature 38°C.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
2311056
Expiry date:
30/11/2028
Size:
¼” NFTF (M).
Marking:
HYCO logo on outer casing. Hyco logo, voltage, batch number and other technical information on adhesive label on outer casing.
Installation Requirements:
R001 R150 R170 R511
Proviso:
Discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Model:
SAPUC1, SAPUC2.
Factor:
Hyco Manufacturing Ltd.
Company Name
Hyco Manufacturing Ltd.
Address
Unit 1 & 2 Normandy Court, Express Way, West Yorkshire
Postcode
WF10 5NR
Phone
01924 225 200

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.