Range of expansion vessels with galvanised or stainless-steel inlets, incorporating butyl rubber diaphragms. The inlet incorporates a plastic strainer (all models, except for WD model). For maximum working pressures please refer to model.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

1000 Expansion Vessels

WRAS Approval Number:

2210343

Expiry date:

31/10/2027

Note:

Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.

Size:

Existing models and models added February 2023: ¾” BSP (M). Models added April 2023: 22mm compression.

Marking:

Existing models and models added February 2023: Reflex, address, pressure rating, volume, serial number and other technical information on an adhesive label on the body. Models added April 2023: Reflex, model, pressure rating, volume, year of manufacture (MM.YYYY) and other technical information on an adhesive label on the body.

Installation Requirements:

R001

Model:

The number in the model indicates capacity in litres: Refix DD 2: maximum working pressure 10 bar. Refix DD 4: 10 bar. Refix DD 7: 10 bar. Refix DD 8: 10 bar. Refix DD 12: 10 bar. Refix DD 18: 10 bar. Refix DD 8: 16 bar. Refix DD 12: 16 bar. Refix DD 8: 25 bar. Refix DT 2: 10 bar. Refix DE 2: 10 bar. Refix DE 4: 10 bar. Refix DE 8: 10 bar. Refix DE 12: 10 bar. Refix DE 18: 10 bar. Refix DE 8: 16 bar. Refix DE 12: 16 bar. Refix DE 8: 25 bar. Refix WD 0.165:10 bar. Models added February 2023: Refix DD Galv 2: 10 bar. Refix DD Galv 4: 10 bar. Refix DD Galv 7: 10 bar. Refix DD Galv 8: 10 bar. Refix DD Galv 12: 10 bar. Refix DE 18: 10 bar. Refix DE ‘E’ 2: 10 bar. Refix DE ‘E’ 4: 10 bar. Refix DE ‘E’ 8: 10 bar. Refix DE ‘E’ 12: 10 bar. Refix D DE ‘E’ 18: 10 bar. Models added April 2023: Refix DE 12 (M22C): 10 bar. Refix DE 18 (M22C): 10 bar.

Factor:

Reflex Winkelmann GmbH

Company Name

Reflex Winkelmann GmbH

Address

Gersteinstrasse 19, D-59227 Ahlen

View All Listings by this Company