Valves Instruments Plus Ltd Approvals


#1909324

Range of stainless-steel screwed pump connectors. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
0870 Tubes
Section Subtitle:
Stainless Steel.
WRAS Approval Number:
1909324
Expiry date:
30/09/2024
Size:
½” - 2” BSP (M).
Marking:
Model, number and size on tag attached to body
Installation Requirements:
R001
Model:
33/0594
Factor:
Valves Instruments Plus Ltd
Company Name
Valves Instruments Plus Ltd
Address
VIP House Chaddock Lane Astley Manchester
Postcode
M29 7JT
Phone
01942 885 700

View All Listings by this Company

Print This Approval


#1908822

Range of wafer type spring loaded, resilient trim, non-return valves with cast iron bodies (blue epoxy powder coated) with stainless steel springs and guides. Maximum working pressure 16.0 bar. The maximum operating temperature is 85°C.

Section:
2185 Valves
Section Subtitle:
Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should be made to `Backflow Prevention Devices`.
WRAS Approval Number:
1908822
Expiry date:
31/08/2024
Size:
See Model
Marking:
VALVES INSTRUMENTS PLUS LOGO (VIP), WRAS, TEMPERATURE, CI & 16 BAR ON DATA PLATE ON BODY. PN, DN & FLOW ARROW ON BODY
Installation Requirements:
R001
Model:
00/0168: DN50 - DN300.
Factor:
Valves Instruments Plus Ltd
Company Name
Valves Instruments Plus Ltd
Address
VIP House Chaddock Lane Astley Manchester
Postcode
M29 7JT
Phone
01942 885 700

View All Listings by this Company

Print This Approval


#1912308

Range of stainless steel convoluted expansion connectors. With threaded or flanged end connections depending on model variant. 33/0595 models have fully threaded tie bars and rubber hat washers, 33/0616 models have carbon steel van stone swivel flanges to BS EN 1092-1;2002, 33/0592 models have carbon steel van stone oval flanges to BS EN 1092-1:2002 complete with pressure restraining tie rods. Maximum working pressures: 33/0612 models: 10.0 bar, 33/0595 & 33/0616 models: 16.0 bar, 33/0592 models 25.0 bar. Maximum operating temperature 100°C.

Section:
1870 Tubes
Section Subtitle:
Flexible - Metal.
WRAS Approval Number:
1912308
Expiry date:
31/12/2024
Size:
See model
Marking:
33/0595, 33/0616 & 33/0592 flanged models: VIP logo, size, flange rating, movement, date of manufacture (MM/YYYY) and length on tag riveted to body. 33/0612 threaded models: model number etched on body.
Installation Requirements:
R001
Model:
33/0612: BSPT (M) ½” (DN15), ¾” (DN20), 1” (DN25), 1¼” (DN32), 1½” (DN40), 2” (DN50). 33/0595: DN32, DN40, DN50, DN65, DN80, DN100, DN125, DN150 & DN200 flanged. 33/0616: DN50, DN65, DN80, DN100, DN125, DN150, DN200 & DN250 swivel flanged. 33/0592: DN32, DN40, DN50, DN65, DN80, DN100, DN125, DN150 & DN200 oval flanged.
Factor:
Valves Instruments Plus Ltd
Company Name
Valves Instruments Plus Ltd
Address
VIP House Chaddock Lane Astley Manchester
Postcode
M29 7JT
Phone
01942 885 700

View All Listings by this Company

Print This Approval


#2004064

Range of screwdriver operated spherical valves with chromium plated brass bodies (Models JMYG-005, JMYG-037, and chrome plated brass balls and NBR seats. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2004064
Expiry date:
30/04/2025
Size:
See model.
Marking:
VIP, WRAS, FLOW ARROW & SIZE ON BODY EN1254-2 & SIZE ON END NUT
Installation Requirements:
R001
Model:
02/0152/015 (chromium plated) - 15mm compression inlet x 15mm compression outlet 02/0152/022(chromium plated) – 22mm compression inlet x 22mm compression outlet
Factor:
Valves Instruments Plus Ltd
Company Name
Valves Instruments Plus Ltd
Address
VIP House Chaddock Lane Astley Manchester
Postcode
M29 7JT
Phone
01942 885 700

View All Listings by this Company

Print This Approval


#2010389

Range of Y-patterned strainers incorporating ductile iron, blue epoxy coated bodies and stainless steel screen. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:
1715 Strainers
WRAS Approval Number:
2010389
Expiry date:
31/10/2025
Size:
DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 DN300.
Marking:
VIP, Size & DN on body. VIP, PN & Maximum Temp on name plate.
Installation Requirements:
R001
Model:
VIP FIG 00/0210 y-patterned strainers
Factor:
Valves Instruments Plus Ltd
Company Name
Valves Instruments Plus Ltd
Address
VIP House Chaddock Lane Astley Manchester
Postcode
M29 7JT
Phone
01942 885 700

View All Listings by this Company

Print This Approval


#2105803

Range of spring loaded, resilient trim, non-return valves (blue epoxy coated cast iron body), with bronze bushing, stainlesss steel spring and disc, and EPDM seat. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2185 Valves
Section Subtitle:
Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should be made to `Backflow Prevention Devices`.
WRAS Approval Number:
2105803
Expiry date:
31/05/2026
Size:
DN50-300 flanged
Marking:
VIP, DN & PB on body. VIP, maximum temperature, maximum pressure, body and disk material and flange drilling on plate on body
Installation Requirements:
R001
Model:
VIP FIG 00/0175 NON-RETURN VALVE: (NOT SUITABLE FOR BACKFLOW PROTECTION)
Factor:
Valves Instruments Plus Ltd
Company Name
Valves Instruments Plus Ltd
Address
VIP House Chaddock Lane Astley Manchester
Postcode
M29 7JT
Phone
01942 885 700

View All Listings by this Company

Print This Approval


#2201807

Range of wafer and lugged type butterfly valves incorporating blue epoxy coated cast iron bodies, stainless steel discs and EPDM seat. The closing mechanism can be controlled by either a lever, gear or bore shaft. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
2201807
Expiry date:
31/01/2027
Size:
25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, 125mm, 150mm, 200mm, 250mm and 300mm
Marking:
VIP, Dn size, body material, disc material, Tmax, Pmax, on data plate. VIP & DN on body
Installation Requirements:
R001
Model:
00/0497 wafer pattern 00/0496 lugged pattern.
Factor:
Valves Instruments Plus Ltd
Company Name
Valves Instruments Plus Ltd
Address
VIP House Chaddock Lane Astley Manchester
Postcode
M29 7JT
Phone
01942 885 700

View All Listings by this Company

Print This Approval


#2111370

Range of single check valve assemblies incorporating DZR brass bodies. Maximum working pressure 10 bar. Maximum operating temperature 85°C.

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
2111370
Expiry date:
30/11/2026
Size:
See model
Marking:
VIP, WRAS, DATE OF MANUFACTURE MM/YY, SIZE, FLOW Arrow & CR ON BODY
Installation Requirements:
R001
Model:
02/0014/015 (15mm compression) 02/0014/022 (22mm compression)
Factor:
Valves Instruments Plus Ltd
Company Name
Valves Instruments Plus Ltd
Address
VIP House Chaddock Lane Astley Manchester
Postcode
M29 7JT
Phone
01942 885 700

View All Listings by this Company

Print This Approval


#2111382

Range of gate valves incorporating bronze bodies and wedges. The valves operate via a non-rising spindle headwork with lock shield or hand wheel operating members. Maximum working pressure 20.0 bar. Maximum operating temperature 85ºC.

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
2111382
Expiry date:
30/11/2026
Size:
½” BSP (F), ¾” BSP (F), 1” BSP (F), 1 ¼” BSP (F), 1 ½” BSP (F), 2” BSP (F), 2 ½” BSP (F) and 3” BSP (F)
Marking:
Model & WRAS on tag. WRAS, pressure and temperature on wheel.
Installation Requirements:
R001
Model:
00/2003 & 00/2006
Factor:
Valves Instruments Plus Ltd
Company Name
Valves Instruments Plus Ltd
Address
VIP House Chaddock Lane Astley Manchester
Postcode
M29 7JT
Phone
01942 885 700

View All Listings by this Company

Print This Approval


#2203364

Double check valve assembly consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass body. For use with copper pipe manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2203364
Expiry date:
31/03/2027
Size:
15 & 22 compression
Marking:
VIP, size, CR, flow arrow, WRAS & date of manufacture, (MM/YY) on body
Installation Requirements:
R001
Model:
02/0015/015 & 02/0015/022 CHECK VALVE ASSEMBLIES
Factor:
Valves Instruments Plus Ltd
Company Name
Valves Instruments Plus Ltd
Address
VIP House Chaddock Lane Astley Manchester
Postcode
M29 7JT
Phone
01942 885 700

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.