'EP601289C'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 85°C.
'KRE70 (80-3)'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 60°C.
'EP6007K'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 85°C.
'NB03973PWRC'. Black coloured, compression moulded NBR rubber. Shore hardness 71. Tested in-radius size 1.0mm. For use with water up to 23°C. From December 2023, the material is suitable for use with water up to 85°C.
'Tangit PVC-U Special Adhesive'. Straw coloured solvent cement. Apply as per manufacturer's instructions. Cure for 20 days@23°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
Range of single hole, single outlet (fixed) electronically controlled combination tap assembles with brass bodies (various finishes). Flow is controlled via a solenoid valve activated via an infra -red sensor. The temperature is controlled via a ceramic cartridge and a single lever operating member. The spout outlet incorporates a pull-out spray with a plastic aerator. The trigger on the pull-out controls optional spray. The inlet adaptor incorporates a single check valve cartridge (verified by test, suitable for backflow protection against fluid category 2). The outlet incorporates a stainless-steel strainer and an aerator. Maximum working pressure 5.0 bar Maximum operating temperature 60°C.
Range of wall mounted, single hole, single outlet (fixed) electronically controlled combination tap assemblies (brushed stainless steel). The flow is controlled by a solenoid valve activated via an infra-red sensor. The inlet to the solenoid incorporates a stainless-steel strainer. The spout outlet incorporates a plastic aerator. The products are supplied with plastic backnuts and a stainless steel braided PEX lined flexible hose assembly for installation between the tap and the solenoid valve. The HK-Cha models added September are also supplied with a plastic flow regulator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.
‘Type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5) incorporating a float operated valve controlling the flow. The inlet hose incorporates an isolation valve. Maximum working pressure 10.0 bar. Cold water use only.
Spring loaded resilient trim check valve cartridge with a plastic body and EPDM ‘O’-rings. For insertion into fittings with specifically sized bores. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C
Spring loaded resilient trim in-line check valve cartridge with acetal body, incorporating a stainless steel spring and NBR or EPDM ‘O’-rings. To be housed in a specifically dimensioned bores. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C for 31.4232.0; 85°C for 31.0030.0.
Range of single check valve assemblies with DZR brass bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies. Maximum working pressure 16.0 bar Maximum operating temperature 85°C
Range of single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assembly (brass body, various finishes - see model) incorporating a ceramic cartridge headwork with a single lever operating member. The spout incorporates an integral plastic flow regulator and a plastic aerator. The product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of flow restrictors with plastic bodies and EPDM ‘O’-rings available in a variety of colours (see models). Maximum operating temperature 60°C.
'PCR-E' range of flow regulators with chrome plated brass housing and NBR sealing gaskets. Maximum operating temperature 65°C.
Single hole, single outlet (swivel) combination tap assemblies stainless steel (various finishes), incorporating a ceramic cartridge headworks with single lever operating member and pullout spray handset. The spout outlet incorporates a plastic aerator and an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Single hole, single outlet (swivel) combination tap assembly (brass body - various finishes), incorporating a ceramic cartridge headwork with single leaver operating member. The spout outlet is a pull-out spray type incorporating a plastic aerator. The pull-out hose inlet connector incorporates an approved check valve cartridge, however, , the complete assembly has not been tested to demonstrate it provides backflow prevention Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C
Single hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks with single lever operating members. The spout is a pull-down hose and handset with an optional spray function. The outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of single-hole, fixed combination tap assemblies (chrome plated brass), incorporating a ceramic cartridge headwork with single lever operating members. The spout outlet incorporates plastic flow aerator. The product is supplied with a brass open outlet adaptor for the spout. Maximum working pressure 10.0 Bar Maximum operating temperature 60°C.
‘Edition 400’ range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with asingle lever operating member. The spout outlet incorporates a plastic aerator. The products can be supplied with or without a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass bodies), incorporating a ceramic cartridge headwork with single lever operating members on models (162438, 162438EX, 162938, 100848 & 100848A). Model (M3108) incorporates quarter turn ceramic disc headworks with cross-top operating members. The spout outlets incorporate plastic flow straighteners or aerators. The products are supplied with approved click type wastes, verified by test. Model (M3108) can also be supplied with a lever operated pop-up waste. Maximum working pressure - 10.0 Bar (M3108, 100848 and 100848A) Maximum working pressure - 5.0 Bar (162438, 162438EX, 162938) Maximum operating temperature 65.0°C
Range of single hole, single outlet (fixed) combination tap assemblies, (chrome plated, brass bodies), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a lever operated pop-up waste.
Floor mounted single hole, single outlet combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with single lever operating member and a self-cancelling diverter to shower outlet. The spout incorporates a waterfall outlet. The product is supplied with a stainless steel inter-locking shower hose & handset. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) Models KT41, KT42, KT43, KT44, TARAVO CH, TARAVO GUNMETAL, TARAVO BN, TARAVO COPPER, TARAVO GOLD & TARAVO MB incorporate a ceramic cartridge headwork with a single lever operating member All other models incorporate ceramic disc headwork with single lever operating members. The spout outlets incorporate plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of single hole, single outlet (swivel) combination tap assemblies (brass body, chrome or black finish) incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a spring-loaded pull-down hose incorporating a spray handset with trigger mechanism that controls the spray. The spray handset incorporates a plastic aerator at the outlet. Maximum working pressure 5 bar. Maximum operating temperature 60°C
Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of single hole, single outlet (swivel) combination tap assemblies, (chrome plated brass bodies). Model 922318 incorporates a ceramic cartridge headwork with single lever operating member. Model 922319 incorporates quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a flow straightener and is also supplied with an optional aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C
Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (brass body, various finishes - see model), comprising of a concealed rough in set (brass) incorporating a ceramic cartridge headwork and a trim set consisting of a spout and a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener and a combined NBR washer and stainless steel strainer. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members (M3206) or cross top operating members (M3106). The spout outlet incorporates a plastic flow straightener and a combined NBR washer and stainless steel strainer. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies, incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating member. The spout outlet incorporates a plastic flow straightener and a combined NBR washer and stainless steel strainer. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating member. The spout outlet incorporates a plastic flow straightener and a combined NBR washer and stainless steel strainer. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Two-hole, single waterfall outlet, combination tap assembly (chrome plated brass), incorporating quarter turn ceramic disc headwork with single lever operating members. The inlets incorporate plastic flow regulators. The product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C
Wall mounted two-hole, single outlet, fixed, combination tap assembly (brass body, various finishes) incorporating a ceramic disk headwork with dome type operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (brass body, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating members and a ceramic disk diverter with cube type operating member controlling the flow between the outlets. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of two hole, metal, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members and a manual diverter to shower outlet. The spout has a waterfall outlet. The product is supplied with a shower hose, handset and metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 80°C.
Range of two hole, metal, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever or cross top (M3105 model only) operating members and a manual diverter to shower outlet. The spout outlets incorporates a plastic flow straightener and a NBR washer with a stainless steel strainer. The product is also supplied with a shower hose, handset and metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.
Floor mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener, NBR washer with stainless steel strainer. The product is supplied with a stainless steel inter-locked shower hose with EPDM lining & handset. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of deck mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and a NBR washer with a stainless steel strainer. The products are supplied with metal backnuts, stainless steel inter-locking shower hoses with EPDM lining and handsets. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.
Range of deck mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and a NBR washer with a stainless steel strainer. The products are supplied with metal backnuts, stainless steel inter-locking shower hoses with EPDM lining and handsets. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.
Deck mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout incorporates a waterfall outlet. This product is supplied with stainless steel inter-locking shower hose, handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.
Range of two hole, single outlet (fixed) combination tap assemblies (chrome plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. K-968M series incorporates non-rising spindle headworks with cross-top or dome operating members.The product incorporates a self-canceling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The products are supplied with a shower hose, shower handset and metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The products are supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Two hole, double outlet swivel combination tap assembly ( stainless steel body) incorporating ceramic cartridge headworks with lever type operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts. The spout incorporates a mixed hot water outlet and separate outlet intended to be supplied by an instantaneous water heater (not included on this approval) to dispense near boiling water. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
Range of deck mounted, three-hole, single outlet (fixed) combination tap assemblies (brass body, various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever operating members. The outlets of the side valves each incorporate a combined EPDM washer and stainless-steel strainer and a brass adaptor, which connects to the spout via two stainless steel braided PEX lined quick connect hoses and a plastic Y-piece. The spout outlet is supplied by a brass inlet pipe which incorporates a plastic flow regulator, as well as a stainless steel braided PEX lined flexible hose assembly. The spout outlet incorporates a plastic aerator. The products are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of three-hole, single outlet (fixed) combination tap assemblies (brass body with various finishes) incorporating quarter turn ceramic disc headworks and various operating members (see models). The products are supplied with or without a lever type operated pop-up waste (see models) and the spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted three-hole concealed mixer with a DZR brass body. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.
Page 60 of 236
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
