Range of single hole, deck mounted flow control, (brass bodies - various finishes) incorporating a ceramic cartridge headwork and lever type operating member. Maximum working pressure 5 bar. Maximum operating temperature 60°C.
Range of shower booster pumps (either single or double) with acetal bodies and impellers and EPDM seals and NBR `O` rings. Supplied with stainless-steel braided EPDM lined flexible hoses incorporating isolation valves Please refer to model for maximum operating pressure. Maximum operating temperature 65°C.
Range of combined storage and booster sets, incorporating a cold-water storage cistern, submersible pump, solenoid valve or alternative actuated ball valve, non-return valve (not suitable for backflow protection), isolation valves and expansion vessel. Maximum working pressure 10.0 bar. Cold water use only.
“TP/TPE series 100” single stage centrifugal pumps, incorporating cast iron (with black coloured electrocoating) or stainless-steel bodies and plastic impellers. Maximum working pressure 10.0 bar. Maximum operating temperature: Cast iron models: 60°C, Stainless steel models: 85°C.
“TPE 2 & TPE3 series” single stage centrifugal pumps, incorporating cast iron (with black coloured electrocoating) or stainless-steel bodies and plastic impellers. Maximum working pressure: Cast iron models: 16.0 bar, Stainless steel models: 10.0 bar. Maximum operating temperature: Cast iron models: 60°C, Stainless steel models: 85°C.
Ceiling mounted shower outlet (chromium plated) with a concealed ceiling installation box. The inlet to the concealed ceiling installation box incorporates a flow regulator and a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Open outlet use. Maximum operating temperature 70.0°C
Range of overhead shower outlets with stainless steel bodies (various finishes). The inlet incorporates a stainless steel filter and a plastic flow regulator. Maximum working temperature 60°C.
Range of in-line Y patterned strainers with bronze bodies and a stainless-steel mesh strainer. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.
Range of in-line Y-patterned strainers with flanged cast iron bodies (blue epoxy powder coated) and stainless steel mesh strainers. The strainers also incorporate a drain plug. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of in-line Y patterned strainers with bronze bodies and a stainless steel mesh strainer. Maximum working pressure 20 bar. Maximum operating temperature 85°C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| VAL2 BIB C CD | Chrome | 1/2" BSP (M) | 5.0 bar | 65 °C | Bristan | Handle | No | 1/2 Turn ceramic disk | Not Applicable | Flow Straightener | |
| VAL2 BIB C 6 CD | Chrome | 1/2" BSP (M) | 5.0 bar | 65 °C | Bristan | Handle | No | 1/2 Turn ceramic disk | Not Applicable | Flow Straightener | |
| RP3 VAL2 BIB C CD | Chrome | 1/2" BSP (M) | 5.0 bar | 65 °C | Bristan | Handle | No | 1/2 Turn ceramic disc | Not Applicable | Flow Straightener |
Model added February 2026: RP3 VAL2 BIB C CD
Range of drain taps with brass (or DZR brass, see models) bodies and non-rising spindle headwork. Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C
Range of pillar taps (chromium plated brass) with quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener, and the product is supplied with a metal back nut. Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C
Pillar tap (chromium plated brass) with quarter turn ceramic disc headworks and a single lever operating member. The spout outlet incorporates a plastic flow straightener, and the product is supplied with a metal back nut. Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C
Dual layered, extruded PVC hoses incorporating EPDM washers. Maximum working pressure 10.0 bar. Cold water use only.
Range of stainless steel braided, nylon braided, double locked (metal outer) or reinforced (see model), PEX/HTRPE lined flexible hose assemblies with EPDM washers and O rings. Available with a variety of finishes or end connections (see model). Maximum operating temperature 85°C.
Stainless steel braided EPDM lined flexible hose assembly with EPDM washers. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of 2, 3, 4, 5 or 6 port manifold assemblies with brass bodies. The products incorporate a spherical valve with a plastic ball on either the inlet or on each outlet (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 95°C
Range of air venting valves with a gunmetal body. Maximum working pressure 13.5 bar. Maximum operating temperature 95°C.
Range of air venting valves with bronze bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, manually operated blending valves with brass bodies (various finishes) and ceramic cartridge headworks controlling both the flow and temperature with a single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, digitally controlled thermostatic blending valve with a 1, 2 or 3 outlets, incorporating a plastic body, the flow and temperature is controlled via a digital user interface. Products incorporate a built-in pump and a solenoid valve. Maximum working pressure 1.0 Bar Maximum operating temperature 65.0°C
Wall mounted, bar type thermostatic blending valve, (brass bodies - various finishes), incorporating a half turn ceramic disc for manually diverting the flow between the shower handset, on off position, and the overhead shower with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a manual override button with a dome type operating member. The product is supplied with an overhead shower head, shower hose and handset. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainers. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C
Range of wall mounted concealed thermostatic shower valves (brass bodies – various finishes) incorporating either quarter turn ceramic discs or ceramic disc diverters. Temperature is controlled independently via a thermostatic cartridge. Products incorporate approved check valve cartridges, however the complete product has not been fully tested to demonstrate backflow protection. Maximum working pressure: 5.0 bar Maximum operating temperature: 70°C
Range of wall mounted, concealed, thermostatic shower valves, (brass bodies - various trim set finishes), incorporating 2-way ceramic disc diverter valve with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The products incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate that is provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 60°C
Range of shower valves with (brass bodies – various finishes) Incorporating either 1 jet or 2 jet setting. Flow is controlled by push button operating members and temperature is controlled via a thermostatic cartridge incorporating a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower handset, hose and overhead shower. Maximum operating pressure 10 bar. Maximum operating temperature 60°C
Range of thermostatic shower valves with a quarter turn ceramic disc headwork and/or a 2-way ceramic disc diverter headwork controlling the flow to 1,2 or 3 outlets with various operating members (see model). Temperature is controlled independently via a thermostatic cartridge with various operating members (see model) incorporating a manual override button Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, thermostatic bar shower mixers (brass bodies – various finishes), incorporating a quarter turn ceramic disc headwork that controls the flow with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge with dome type operating member that incorporates a manual override button. Products incorporate a half turn ceramic disc headwork that diverts the flow to an overhead shower or shower handset. Both inlets incorporate an approved check valve cartridge and stainless steel strainers however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5 bar. Maximum operating temperature 60 C.
Range of wall mounted bar type thermostatic shower valves (brass bodies – various finishes) incorporating quarter turn ceramic disc headwork which controls the flow with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with an optional flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C
Range of eccentric lugged or wafer type butterfly valves with stainless teel or blue epoxy coated bodies and stainless steel or epoxy coated ductile iron discs, incorporating EPDM or PTFE seats (see models). Max working pressure: 10.0 Bar, 16.0 Bar or 20.0 Bar (see models). Max operating temperature 80°C or 99°C (see models).
Range of butterfly valves with blue epoxy coated ductile iron bodies, coated ductile iron or stainless-steel discs & EPDM sealing ring. The closing mechanism can be controlled by single lever or a handwheel. Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C
Range of butterfly valves with ductile iron bodies (blue epoxy coated) and discs. The seats incorporate EPDM seals, and the products are operated via a hand wheel. Maximum working pressure: 16.0 Bar Maximum operating temperature: 60°C
Range of wafer and fully lugged butterfly valves (gear or handwheel operation) with a cast iron body (blue epoxy coated), EPDM seat and stainless steel disc. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of wafer and fully lugged butterfly valves (gear or handwheel operation) with a cast iron body and disc (blue epoxy coated), EPDM seat. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of lugged or wafer butterfly valves with either lever or hand wheel operation and a blue epoxy coated ductile iron body. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
Range of gear operated butterfly valves with blue epoxy coated ductile iron bodies. Maximum working pressure 10.0 & 16.0 bar. Maximum operating temperature 60°C.
Range of handwheel operated butterfly valves, incorporating blue epoxy coated ductile iron bodies and discs, with EPDM seats. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C.
Range of lugged or wafer butterfly valves with either lever or hand wheel operation and a blue epoxy coated ductile iron body. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
Range of lugged or wafer butterfly valves with either lever or hand wheel operation and a blue epoxy coated ductile iron body. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
Range of black nylon coated cast iron equilibrium float operated valves with EPDM seals. Maximum working pressure 10.0 Bar Maximum operating temperature 23.0°C
Range of wall mounted, exposed shower valves (brass bodies various finishes and trim sets), incorporating a quarter turn ceramic disc headwork and either single lever or dome operating member. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C
Range of spring loaded, resilient trim, non-return valves with cast iron bodies (blue epoxy powder coated) and stainless-steel plates. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of in-line, pressure reducing valves with DZR brass bodies and stainless-steel strainers. Push fit versions only can also be used with both polybutylene pipe (manufactured to BS7291-2) and PEX pipe (manufactured to BS7291-3) Maximum inlet supply pressure 16.0 bar. Outlet supply pressure is adjustable within the range of 1.5 bar to 6.0 bar. Cold water use only.
Range of in-line, manually adjustable pressure reducing valves with brushed chrome DZR brass bodies. Outlet pressure range: 1.0 - 6.0 bar. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.
In-line manually adjustable pressure reducing valves with a DZR brass body. The product is supplied with a pressure gauge. Maximum inlet supply pressure 16.0 bar. Maximum outlet pressures between 1.0 and 6.0 bar. Maximum operating temperature 85°C.
Range of in-line pressure reducing valves with either chromium plated DZR brass bodies, with manually adjustable outlet pressure ranges between 2.8bar to 3.2bar. Compression connections to be used with copper pipe EN1057 only. Maximum working inlet pressure: 16.0 bar. Maximum operating temperature: 85°C.
Range of pre-set pressure relief valves (3 bar, 6 bar and 7 bar relief pressures) incorporating brass bodies and an EPDM diaphragm. The valves are fitted with a hand operated rotating easing gear. Maximum working pressure 10.0 bar. Maximum operating temperature 110°C.
Pressure relief valve set at 6.0 Bar with a DZR brass body. Max operating temperature 100 ºC
Range of spherical valves with brass or brushed chrome plated bodies, chrome plated brass ball, PTFE seats and lever type operating members. Models with compression joints are for use with BS EN1057 copper pipe. Maximum working pressure 10 - 16 Bar (See model) Maximum operating temperature 85°C
Range of spherical valves with brass bodies (nickel plated), brass ball, PTFE seats and EPDM ‘O’-rings. For use with Polybutylene pipe (manufactured to BS7291 part 2), PEX pipe (manufactured to BS7291 part 3) and copper pipe (manufactured to EN 1057). Maximum working pressure: 6 bar Maximum operating temperature: 95°C
Page 177 of 236
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
