Floguard range of in-line non-verifiable double check valve assemblies consisting of a spring loaded resilient trim single check valve cartridge housed within a DZR brass body (FLOW230002 model is nickel plated). Compression models are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressure: 16.0 Bar Maximum operating temperature: 65°C

Section:

0034 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.

WRAS Approval Number:

250302722

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Reliance Worldwide Corporation ‘R’ logo, flow arrow, CR & size on body

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

440 00 04 Double Check Valve - 15mm compression inlet/outlet 440 00 08 Double Check Valve - 28mm compression inlet/outlet 440 01 04 Double Check Valve - ½” BSP (F) inlet/outlet 440 01 06 Double Check Valve - ¾” BSP (F) inlet/outlet 440 01 08 Double Check Valve - 1” BSP (F) inlet/outlet 440 01 10 Double Check Valve - 1¼” BSP (F) inlet/outlet 440 01 12 Double Check Valve - 1½” BSP (F) inlet/outlet 440 01 16 Double Check Valve - 2” BSP (F) inlet/outlet

Approval Holder:

Oventrop UK Limited

Company Name

Oventrop UK Limited

Address

Oventrop House Unit 11 Hatch Industrial Park Greywell Road Hatch Basingstoke

Postcode

RG24 7NG

Country

United Kingdom

Phone

+44 (0) 1256 330 441

General Email

mikewise@oventrop.co.uk

View All Listings by this Company

Manufacturer:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of In-line plastic flow regulators housed within a brass bodies incorporating a plastic strainer and EPDM ‘O’-rings. Maximum working pressure 10.0 Bar Maximum operating temperature 65°C.

Section:

0435 Taps and shower valves - Components

Section Subtitle:

Aerators, Flow Straighteners, Flow Regulators and Restrictors.

WRAS Approval Number:

250688004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

HL2024, model and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

"HL2024 Control Flow 1P– ½” BSP (F) HL2024 Control Flow 1P– ½” BSP (M) HL2024 Control Flow 1P– 15mm HL2024 Control Flow 1P– ¾” BSP (M) HL2024 Control Flow 3P – 15mm HL2024 Thermastream – ¾” BSP (M) HL2024 Thermastream – S7.5 ½” BSP (M)

Approval Holder:

Cenergist Ltd

Company Name

Cenergist Ltd

Address

8 Bede House Tower Road, Glover Industrial Estate, Washington, England

Postcode

NE37 2SH

Country

United Kingdom

View All Listings by this Company

Range of ceramic cartridge headworks with plastic bodies for insertion into specifically dimensioned tap assemblies. Some models incorporate a stainless-steel strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

0440 Headworks

Section Subtitle:

Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

WRAS Approval Number:

241015018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

92437: Ø 34.7mm, 38285: Ø 39.8mm.

Marking:

Chaoling and WRAS on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

35G1-HEADWORKS 92437 40G1-HEADWORKS 38285

Product Images

Approval Holder:

Toolstation Ltd.

Company Name

Toolstation Ltd.

Address

Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Section:

0442 Thermostatic cartridges

Description:

A Range of Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

31/07/2030

Product Images

Approval Holder:

Taizhou Xingle Plumbing Equipment Co., Ltd

Company Name

Taizhou Xingle Plumbing Equipment Co., Ltd

Address

Southeast Industrial Agglomeration Point, Songmen Town, Wenling City

Postcode

317511

Country

China

View All Listings by this Company

Manufacturers:

Taizhou Xingle Plumbing Equipment Co., Ltd.

Range of single hole, single outlet, (swivel), combination tap assemblies (chromium plated brass bodies), incorporating quarter turn ceramic disc headworks and single lever operating members. The outlet is a pull down spray type and incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.

WRAS Approval Number:

2311378

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections. 15mm compression – (137040 models only)

Marking:

WIX on Body

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2028

Model:

173904 Loose Coil Tap Brushed 137040BN

Approval Holder:

Wickes PLC

Company Name

Wickes PLC

Address

Vision House, Colonial Way, Watford.

Postcode

WD24 4JL

Country

United Kingdom

Phone

01923 656600

General Email

Steven.ferry@wickes.co.uk

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass bodies), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull down spray type and incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.

WRAS Approval Number:

2311379

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating 15mm compression connections.

Marking:

WIX on Body

Installation Requirements:

R001 R090

Expiry date:

30/11/2028

Model:

170100 Simeto Mono Mixer 311150 Simeto Monobloc Pull out Kitchen Mixer Chrome

Approval Holder:

Wickes PLC

Company Name

Wickes PLC

Address

Vision House, Colonial Way, Watford.

Postcode

WD24 4JL

Country

United Kingdom

Phone

01923 656600

General Email

Steven.ferry@wickes.co.uk

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener or a plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

240988032

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

nabis on operating member

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2029

Model:

A05668 & A05669

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Capable of achieving AUK3 Tap Gap IRN R160 only applies to SL-T10102

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010 R160

Expiry date:

31/07/2030

Notes & Further Information

Various finish: (1) Without suffix to current model number: Chrome plated (2) With suffix B: Black (3) With suffix BB: Brushed brass (4) Models SL-T40202 & SL-T40102W with suffix G: Champagne Gold

Product Images

Approval Holder:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturers:

Taizhou Shenglang Sanitary Ware Co, Ltd.

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Stainless Steel braided EPDM lined inlet hoses Click-waste not verified by test. Capable of achieving AUK3 Tap gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Stainless Steel braided EPDM lined inlet hoses. Click type waste not verified by test. Capable of achieving AUK3 Tap gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Combination Tap assemblies incorporating ceramic cartridge or ceramic disc headworks.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2310405

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

WIX on body

Installation Requirements:

R001 R006 R020

Expiry date:

31/10/2028

Model:

170097 Fiora Mono Mixer, 311149 Fiora Monobloc Kitchen Mixer Chrome, 170098 Fiora Mono Mixer, 311160 Fiora Monobloc Kitchen Mixer Brushed Nickle, 313071 Fiora Mono Mixer Matt Black, 313072 Fiora Mono Mixer Brushed Brass 173901 Cone Monobloc Mixer Chrome,

Approval Holder:

Wickes PLC

Company Name

Wickes PLC

Address

Vision House, Colonial Way, Watford.

Postcode

WD24 4JL

Country

United Kingdom

Phone

01923 656600

General Email

Steven.ferry@wickes.co.uk

View All Listings by this Company

Range of single hole, single outlet (fixed) pillar tap with brass bodies (chrome plated), incorporating ceramic disc headwork and single lever operating member. Spout outlet incorporates a plastic aerator. Maximum working pressure 5- 10.0 bar (see models). Maximum operating temperature 60°C – 85°C (see models).

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2212375

Size:

½” BSF (F) Captive nut

Marking:

MYSTYLE on rear of body

Installation Requirements:

R001 R006 R010

Expiry date:

31/12/2027

Model:

MSTAAV1 MSTAAV1M MSTACR1 MSTACR1M MSTAEN1 MSTAEN1M MSTAAV1BL MSTAAV1MBL MSTACO1BL MSTACR1BL MSTACR1MBL MSTAEN1BL MSTAEN1MBL MSTAVE1BL MSTAVE1MBL

Approval Holder:

MyLife Bathrooms Limited

Company Name

MyLife Bathrooms Limited

Address

Greenbank Industrial Estate Rampart Road Newry Co. Down BT342QU Ireland

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly with a brass body (chromium plated brass), incorporating ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250608017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

PET braided HDPE lined flexible hose assemblies with ½” BSP captive nut end connections.

Marking:

Dolphin Solutions Ltd logo on rear of body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/06/2030

Model:

DB2100.a.bbb. Where ‘aaa’ denotes the additional external surface finish (which is a non-water contact area) when applied. It can be one, two or three digits, which can be any combination of numbers and/or letters. As examples: ‘PVD’ or ‘.5’ to denote a PVD finish has been applied, ‘PC’ to denote a powder coat has been applied or alternatively .5. Examples of coatings include but is not limited to PVD, powder coating and ceramic coating. Where ‘yy’ denotes the external surface colour (which is a non-water contact area) where applicable. It will always be 2 digits, which can be any combination of numbers and/or letters. As examples: 01 = RAL9005 Black, 51 = PVD Gold finish. Also note the ‘-‘can be replaced/interchanged with a ‘.’ in the SKU – example DBS.xxx.yy.

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

General Email

Ralph.Mumford@dolphinsolutions.com

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (plated brass), incorporating ceramic cartridge headwork with dome type operating member, located at the end of the spout. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250608020

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies with ¾” BSP captive nut end connection.

Marking:

Vado logo etched on mixer body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/06/2030

Model:

CAM-150-XXX. Suffixes that replace XXX to denote colour finish: MB - Matt Black, MW - Matt White, SBR - Satin Brass, CP or C/P - Chrome.

Approval Holder:

VADO

Company Name

VADO

Address

Cheddar Business Park Wedmore Road Cheddar

Postcode

BS27 3EB

Country

United Kingdom

Phone

01934 745895

General Email

tom.ross@vado.com

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator or flow straightener. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

2311922

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

WIX on rear of body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2028

Model:

232776 Zores Monobloc Sink Mixer - Chrome 232775 Zores Monobloc Sink Mixer - Brushed Nickle 232774 Zores Monobloc Sink Mixer - Antique Brass 173898 Contemporary Monobloc Sink Mixer - Chrome 173902 Contemporary Monobloc Sink Mixer - Brushed Nickle 180982 Toba Dual Lever Tap - Chrome 170428 Toba Mono Mixer - Brushed Nickle 313086 Toba Mono Mixer - Brushed Brass. 311144 Toba Monobloc Kitchen Mixer - Chrome 311148 Toba Monobloc Kitchen Mixer - Brushed Nickle 180981 Cosa Mono Mixer - Chrome 311143 Cosa Monoblock Kitchen Mixer Tap - Chrome 223122 Kumai Tap - Matt Black 223123 Kumai Tap - Brushed Gold

Approval Holder:

Wickes PLC

Company Name

Wickes PLC

Address

Vision House, Colonial Way, Watford.

Postcode

WD24 4JL

Country

United Kingdom

Phone

01923 656600

General Email

Steven.ferry@wickes.co.uk

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator or a plastic flow straightener. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

240704069

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided EPDM/PEX lined flexible hose assemblies with ½" captive nut end connections.

Marking:

WIX on body

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2029

Model:

170430 Vittoria Mono Mixer Brushed Nickle 170429 Vittoria Mono Kitchen Mixer Chrome 313073 Vittoria Dual Lever Mixer Matt Black 313074 Vittoria Dual Lever Mixer Gold 313075 Vittoria Dual Lever Mixer Gun Metal 313083 Vittoria Mono Mixer Matt Black 313084 Vittoria Mono Mixer Brushed Brass 313085 Vittoria Mono Mixer Gun Metal 311146 Vittoria Monobloc Kitchen Mixer Brushed Nickle 311147 Vittoria Mono Mixer Chrome .

Approval Holder:

Wickes PLC

Company Name

Wickes PLC

Address

Vision House, Colonial Way, Watford.

Postcode

WD24 4JL

Country

United Kingdom

Phone

01923 656600

General Email

Steven.ferry@wickes.co.uk

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assemblies (brass body - varies finishes incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

2307370

Size:

Stainless-steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

Lusso on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/07/2028

Model:

WK305 Available with surface treatment: Chrome Rose Gold Brushed Titanium Gold Brushed Zirconium Gold Brushed Rose Gold MatteWhite Brushed Stainless Brushed Nickel Polished Nickel Gunmetal Matt Black Titanium Gold Zirconium Gold Black+Chrome White Chrome+White Quartzite Zirconium Gold+Chrome Titanium Gold+Chrome Medieval Antique Bronze Champagne Brushed Lead Polished Black

Approval Holder:

Lusso Stone Ltd

Company Name

Lusso Stone Ltd

Address

Lusso House Princeton Drive Stockton

Country

United Kingdom

General Email

customerservice @lusso.com

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assemblies (brass body - varies finishes) incorporating 1/4 turn ceramic disk headworks and single lever operating members. Maximum working pressure 10 bar. Maximum operating temperature 65°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250615013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless Steel Braided PEX lined flexible hose assemblies with 1/2" captive nut end connections.

Marking:

WIX on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/06/2030

Model:

313067, 313068, 313069 & 313070

Approval Holder:

Wickes PLC

Company Name

Wickes PLC

Address

Vision House, Colonial Way, Watford.

Postcode

WD24 4JL

Country

United Kingdom

Phone

01923 656600

General Email

Steven.ferry@wickes.co.uk

View All Listings by this Company

Floor mounted, single hole, single outlet (swivel) combination tap assembly (brass body – various finishes), incorporating two ceramic cartridge headworks with single lever operating members, with the upper headwork functioning as a manual diverter, diverting flow between the spout outlet and shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset. Maximum working pressure: 10 Bar. Maximum operating temperature 65°C.

Section:

0471 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout incorporating a manual diverter to a shower outlet.

WRAS Approval Number:

2307369

Size:

Stainless-steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.

Marking:

Lusso on body.

Installation Requirements:

R001 R009 R020

Expiry date:

31/07/2028

Model:

5030 Available with surface treatment: Chrome, Rose Gold, Brushed Titanium Gold, Brushed Zirconium Gold, Brushed Rose Gold, MatteWhite, Brushed Stainless, Brushed Nickel, Polished Nickel, Gunmetal, Matt Black, Titanium Gold, Zirconium Gold, Black+Chrome, White, Chrome+White, Quartzite Zirconium Gold+Chrome, Titanium Gold+Chrome, Medieval, Antique Bronze, Champagne, Brushed Lead, Polished Black.

Approval Holder:

Lusso Stone Ltd

Company Name

Lusso Stone Ltd

Address

Lusso House Princeton Drive Stockton

Country

United Kingdom

General Email

customerservice @lusso.com

View All Listings by this Company

Section:

0480 Combination Tap Assemblies

Description:

A Single hole tap(s) with a double outlet and a fixed spout.

Deck Mounted. Stainless steel braided EPDM lined inlet hoses. Capable of achieving AUK3 Tap Gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006

Expiry date:

31/08/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Section:

0510 Combination Tap Assemblies

Description:

A Two hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Capable of achieving AUK2 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R005 R010

Expiry date:

30/06/2030

Notes & Further Information

The model without a suffix indicates chrome. The model number with suffix B indicates black. The model number with suffix BB indicates Brushed brass.

Product Images

Approval Holder:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturers:

Taizhou Shenglang Sanitary Ware Co, Ltd.

Two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating non-rising spindle headworks with cross top operating members. The product is supplied with metal backnuts. Maximum temperature 60°C Maximum Pressure 10 bar

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250615012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/4" BSP(M)

Marking:

DTC59 on rear of body

Installation Requirements:

R001 R006 R020

Expiry date:

30/06/2030

Model:

TUD08 & TUD08/501

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Range of two hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes) incorporating quarter turn ceramic disc headwork with single lever type operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic aerator and the product is also supplied with a shower handset and hose. The inlet of the shower handset incorporates a plastic flow regulator. The product is supplied with either plastic or metal backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

250708018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

Huanri on rear of tap body.

Installation Requirements:

R001 R006 R020

Expiry date:

31/07/2030

Model:

1003BD18 Chrome plated, 1003BD18BN Nickel plated, 1003BD18BK Matt Black.

Approval Holder:

Zhejiang Huanri Sanitation Co,.Ltd.

Company Name

Zhejiang Huanri Sanitation Co,.Ltd.

Address

Xuanmen Industrial Zone, Lupu Town Yuhuan County Zhejiang Province

Country

China

View All Listings by this Company

Range of wall mounted thermostatic shower valves (plated brass bodies), incorporating ceramic disc headworks controlling the flow and a thermostatic cartridge independently controlling the temperature, both using dome type operating members. Both inlets incorporate single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection) and metal strainers. Spout outlets incorporate plastic flow straighteners. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

250608021

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm compression.

Marking:

Vado logo etched on body

Installation Requirements:

R001 R020

Expiry date:

30/06/2030

Model:

CAM-123T-XXX T - Thermostatic Suffixes that replace XXX to denote colour finish: MB- Matt Black, MW- Matt White, SBR- Satin Brass CP or C/P - Chrome.

Approval Holder:

VADO

Company Name

VADO

Address

Cheddar Business Park Wedmore Road Cheddar

Postcode

BS27 3EB

Country

United Kingdom

Phone

01934 745895

General Email

tom.ross@vado.com

View All Listings by this Company

Section:

0520 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

Deck Mounted Capable of achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R020

Expiry date:

31/07/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Section:

0520 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

Deck Mounted. Incorporates hose retainer. Capable of achieving AUK2 Tap Gap. IRN160 only applies to Waterfall Spout model SL-T10101.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R020 R160

Expiry date:

31/07/2030

Product Images

Approval Holder:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturers:

Taizhou Shenglang Sanitary Ware Co, Ltd.

Two-hole, single outlet (fixed) combination tap assembly (chrome plated brass body) incorporating a two-way diverter headwork that controls the flow between the spout outlet and shower outlet with dome type operating members. The temperature is controlled independently via a thermostatic mixing cartridge, the incorporates a manual override button. The spout outlet incorporates a plastic flow straightener. The products are supplied with metal backnuts. Maximum working pressure 5 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

2303407

Size:

¾” BSP (M)

Marking:

Aqualisa & 707096 on body

Installation Requirements:

R001 R006 R020

Expiry date:

31/03/2028

Model:

707096

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of two-hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator or flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar Maximum operating temperature 65°C.

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

240804006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

WIX on body

Installation Requirements:

R001 R006 R010

Expiry date:

31/08/2029

Model:

173896 Traditional Bridge Tap Chrome 223124 Zores Bridge Tap Antique Brass 207009 Seattle Bridge Mixer Tap

Approval Holder:

Wickes PLC

Company Name

Wickes PLC

Address

Vision House, Colonial Way, Watford.

Postcode

WD24 4JL

Country

United Kingdom

Phone

01923 656600

General Email

Steven.ferry@wickes.co.uk

View All Listings by this Company

Section:

0650 Combination Tap Assemblies

Description:

A Range of Three hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Stainless steel braided EPDM lined inter-connecting hoses Capable of achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2030

Notes & Further Information

These models only different in surface treatment

Product Images

Approval Holder:

ALFRED VICTORIA LIMITED

Company Name

ALFRED VICTORIA LIMITED

Postcode

B45 9AL

View All Listings by this Company

Manufacturers:

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Section:

0650 Combination Tap Assemblies

Description:

A Range of Three hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Capable of achieving AUK3 Tap Gap Stainless-steel braided EPDM lined connection hoses

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of three-hole, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes) incorporating quarter turn ceramic disc headworks with single lever or cross top operating members. The spout outlets incorporate plastic aerators. The products incorporate stainless steel braided, silicone rubber (TPSiV) lined inter-connecting hoses. The products are supplied with metal back nuts and click type pop-up wastes (not verified by test). Maximum working pressure: 6.0 Bar. Maximum operating temperature: 65°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250688002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Waterworks on spout.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/06/2030

Model:

DSLS01 (cross top) DSLS10 (single lever) DSLS20 (cross top) DSLS30 (single lever)

Approval Holder:

Waterworks Ltd

Company Name

Waterworks Ltd

Address

60 Backus Ave. Danbury

Postcode

CT06810

Country

United States

Phone

2035466207

General Email

mary.kimlinger@waterworks.com

View All Listings by this Company

Range of three hole, wall mounted, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model) comprising of a spout outlet, a clipsed extension set for accommodating headworks and a trim set with various operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250504023

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

THG etched on body.

Installation Requirements:

R001 R040

Expiry date:

31/05/2030

Model:

40GB/W, 41GB/W, 40SGB/W, 41SGB/W. Styles: 40GB/W-41GB/W • 1900 G25-1900 ; G28-1900 à manettes ; G3M-1900 à manettes métal lisse • BEAUBOURG ST GERMAIN G7A-Beaubourg ; G7B-Beaubourg à manettes ; G7C-Saint-Germain ; G7D-Saint-Germain à manettes • BELUGA G1T-Beluga ; G1U-Beluga à manettes • BEYOND U6F-Beyond Crystal - cristal clair ; U6G-Beyond Crystal - cristal aqua ; U6H-Beyond Crystal - cristal rouge ; U6J-Beyond Crystal - cristal couleur champagne ; U6K-Beyond Crystal - cristal bleu • BROADWAY A04-Broadway à manettes ; A52-Broadway • CHARLESTON D1B-Gatsby ; G29-Charleston ; G3N-Charleston à manettes métal lisse ; G75-Charleston à manettes • COLLECTION O - LES ONDES G4P-Collection "O" ; G8A-Les Ondes ; G8B-Les Ondes à manettes ; U5P-New Paradise • DEAN WEST COAST G7E-Dean ; U9A-West Coast croisillon metal ; U9B-West Coast manette métal ; U9C-West Coast croisillon guilloché lin ; U9D-West Coast manette guilloché lin ; U9E-West Coast croisillon onyx noir ; U9F-West Coast manette onyx noir ; U9G-West Coast croisillon onyx blanc ; U9H-West Coast manette onyx blanc ; G7F-Bondi ; G7G-Bondi à manettes ; G7H-Club Saint-Germain ; G7J-Club Saint-Germain à manettes ; U9I-West Coast manette - insert à définir ; U9J-West Coast croisillons - insert à définir • EMOTION U5K-Camélia cristal noir ; U5L-Camélia cristal clair • ESTRELA U3J-Estrela ; U3K-Estrela à manettes ; U3L-Estrela inserts métal • GRAND CENTRAL U9K-Grand Central croisillon métal ; U9L-Grand Central manette métal ; U9M-Grand Central croisillon onyx noir ; U9N-Grand Central manette onyx noir ; U9P-Grand Central manette - insert à définir ; U9Q-Grand Central croisillon - insert à définir ; U9R-Grand Central croisillon onyx blanc ; U9S-Grand Central manette onyx blanc • HAMPTONS G4R-Hamptons ; G4S-Hamptons à manettes • ICON X U7G-Icon-X ; U7H-Icon-X à manettes ; U7J-Icon-X - insert métal ; U7K-Icon-X à manettes - insert métal ; U7L-Icon-X – Titane ; U7M-Icon-X à manettes – Titane ; U7N-Icon-X, pierre à définir ; U7P-Icon-X à manettes, pierre à définir ; U7S-Icon-X - Carbone or ; U7T-Icon-X à manettes- Carbone or • METAMORPHOSE G3R-Montaigne marbre Grand Antique ; G3S-Montaigne marbre Grand Antique à manettes ; G3T-Montaigne marbre Leonardo Grey ; G3U-Montaigne marbre Leonardo Grey à manettes ; G3V-Montaigne marbre blanc Vénus ; G3W-Montaigne marbre blanc Vénus à manettes ; G6A-Métamorphose ; G6B-Métamorphose à manettes ; G6C-Métamorphose carbone ; G6D-Métamorphose céramique noire ; G6E-Métamorphose céramique blanche ; G6F-Métamorphose à manettes coloris spécifique ; U5N-New Island • ITHAQUE A41-Dahlia ; A7A-Ithaque décor Or ; A7B-Ithaque décor Platine ; A7F-Marquise noir décor Or ; A7G-Marquise blanc décor Platine ; A8M-Vogue Malachite ; A8N-Vogue Jaspe rouge ; A8P-Vogue Onyx noir ; A8R-Vogue Oeil de tigre ; A8S-Vogue Lapis Lazuli ; A9B-Jaipur cristal satiné ; A9C-Jaipur Onyx noir ; A9F-Jaipur métal ; E53-Najem ; U1A-Mandarine métal ; U1D-Mandarine cristal clair ; U1E-Mandarine cristal clair satiné ; U1K-Mandarine Cristallia Diamant ; U5A-Flore ; U5D-Sun Dragon ; U5H-Jade Dragon ; U5J-Rose ; U7A-Trocadéro Malachite ; U7B-Trocadéro Lapis Lazuli • LE 11 U2A-Le 11 ; U2B-Le 11 à manettes • MALMAISON U8B-Monte Carlo porcelaine or ; U8C-Monte Carlo porcelaine or blanc ; U93-Malmaison métal ; U95-Malmaison Portoro • METROPOLIS A2A-Métropolis cristal clair ; A2B-Métropolis cristal clair à manettes ; A2L-Métropolis cristal noir ; A2M-Métropolis cristal noir à manettes • MOSSI A2N-Mossi cristal clair ; U4A-Diplomate bagues lisses ; U4B-Diplomate bagues annelées ; U4C-Diplomate bagues torsadées ; U4D-Diplomate Royale ; U4E-Duomo ; U4F-Duomo cristal ; U5B-Island ; U5C-Paradise ; U6A-Pétale de Cristal clair ; U6B-Pétale de Cristal bleu ; U6C-Pétale de Cristal rouge ; U6D-Pétale de Cristal noir ; U6E-Pétale de Cristal clair liseré doré ; U6M-Mille nuits Cristal clair ; U6N-Mille nuits Cristal couleur Champagne ; U6P-Mille nuits Cristal Brume • NANO G5A-Nano ; G5B-Nano à manettes ; G5D-Anoa • PURE A2R-Masque de Femme lunaire ; A2S-Masque de Femme solaire ; A2T-Masque de Femme, métal gravé ; A2U-Masque de Femme, métal lisse ; G04-Pure ; U5E-Ginkgo ; U5F-Vegetal • PRESTIGE A1J-Amboise Malachite ; A1K-Amboise Lapis Lazuli ; A1L-Amboise Jaspe rouge ; A1M-Amboise Onyx noir ; A1S-Cheverny Malachite ; A1T-Cheverny Lapis Lazuli ; A1U-Cheverny Jaspe rouge ; A1V-Sully Malachite ; A1W-Sully Lapis Lazuli ; A1X-Sully Jaspe rouge ; A2C-Océania ; A2E-Venice ; A2F-Naïade ; A2G-Ange ; A2H-Panthère cristal clair ; A2J-Papillon ; A2K-Panthère cristal noir ; A3T-Amboise Marbre à définir ; A3V-Cheverny Marbre à définir ; U1S-Sully Onyx blanc ; U1V-Cheverny Onyx noir • PROFIL A6A-Profil métal ; A6B-Profil métal à manettes ; A6G-Profil Lalique cristal clair ; A6H-Profil Lalique cristal clair à manettes ; A6N-Profil Onyx noir ; A6P-Profil Onyx noir à manettes • SHAO A33-Bambou cristal noir ; A34-Bambou cristal Ambre ; A35-Bambou cristal clair • SOHO G5E-Soho ; G7K-Soho 2023 • SYSTÈME G9A-SYSTEM métal lisse ; G9B-SYSTEM métal lisse à manettes ; G9C-SYSTEM métal diamant ; G9D-SYSTEM métal diamant à manettes ; G9E-SYSTEM métal quadrillé ; G9F-SYSTEM métal quadrillé à manettes ; G9G-SYSTEM Howlite ; G9H-SYSTEM Howlite à manettes ; G9J-SYSTEM cristal ; G9K-SYSTEM cristal à manettes • YOKO G6G-New Spirit ; G6H-New Spirit à manettes ; G7R-Yoko ; G7S-Yoko Color ; G7T-Yoko Ice ; G7U-Yoko Howlite ; G7V-Yoko Delta ; G7W-Yoko Delta Howlite ; G7X-Yoko - pierre à définir ; G7Y-Yoko Delta - insert pierre (triangle) à définir • ZOOM U4J-ZOOM Five ; U4K-ZOOM Seven ; U4L-ZOOM Twelve 40SGB/W – 41SGB/W • ART DECO A54-Art Déco ; A55-Art Déco à manettes ; A56-Art Déco Cristal ; A57-Tradition ; A58-Tradition à manettes ; A59-Tradition Cristal • FAUBOURG G2F-Le 9 - pierre à définir ; G2H-Le 9 Howlite ; G2I-Le 9 Nero Marquina ; G2J-Faubourg porcelaine blanche à manettes ; G2K-Faubourg porcelaine blanche ; G2L-Faubourg porcelaine noire ; G2M-Faubourg porcelaine noire à manettes ; G2N-Froufrou ; G2P-Froufrou à manettes ; G2R-Frivole ; G2S-Frivole à manettes ; G2T-Faubourg métal ; G2U-Faubourg métal à manettes ; G58-Spirit à manettes ; G69-Spirit • NIHAL U2L-Nihal porcelaine bleue ; U2M-Nihal métal lisse ; U2N-Nihal porcelaine ivoire ; U2P-Nihal porcelaine noire ; U2R-Nihal porcelaine verte ; U2S-Nihal porcelaine rouge • POMME A42-Pomme cristal clair satiné ; A46-Pomme cristal lustré or ; U2D-INFINI porcelaine blanche ; U2E-INFINI porcelaine blanche décor platine ; U2F-INFINI porcelaine blanche décor or • WEST COAST / GRAND CENTRAL U9A-West Coast croisillon métal ;U9B-West Coast manette métal ; U9C-West Coast croisillon guilloché lin ; U9D-West Coast manette guilloché lin ; U9E-West Coast croisillon onyx noir ; U9F-West Coast manette onyx noir ; U9G-West Coast croisillon onyx blanc ; U9H-West Coast manette onyx blanc ; U9I-West Coast manette - insert à définir ; U9J-West Coast croisillons - insert à définir ; U9K-Grand Central croisillon métal ; U9L-Grand Central manette métal ; U9M-Grand Central croisillon onyx noir ; U9N-Grand Central manette onyx noir ; U9P-Grand Central manette - insert à définir ; U9Q-Grand Central croisillon - insert à définir ; U9R-Grand Central croisillon onyx blanc ; U9S-Grand Central manette onyx blanc Finish : A02-Polished Chrome ; A13-Smoked Brass ; B01-Polished Nickel ; C01-Matte Nickel ; C02-Matte Chrome ; C27-Unlacquered Brass ; C47-Smoked Nickel ; D01-Light Bronze Lacquered ; D05-Lacquered Matte Bronze ; D12-Polished Brass Lacquered ; D15-Polished Black Lacquered ; D16-White Lacquered ; D18-Matte Black lacquered ; D21-Old Oil-Rubbed Bronze ; D24-Aranja ; H17-Matt Aranja ; F01-Polished Gold ; F07-Matte Gold ; F18-Rhodium Silver ; F19-Matt Rhodium Silver ; F27-Rose Gold ; F30-Soft Gold ; F31-Matte Soft Gold ; F33-Brown Bronze PVD ; F34-Matte Brown Bronze PVD ; G01-Polished Nickel/Polished Gold ; G02-Polished Chrome/Polished Gold ; H03-Lacquered Antique Silver ; H07-Varnished Matte Antique Red Copper ; H08-Lacquered Matte Antique Silver ; H24-Lacquered Antique Copper ; H28-Antique Nickel ; H49-Brass PVD ; H50-Matte Brass PVD ; H52-Gold PVD ; H53-Matte Gold PVD ; H55-Nickel PVD ; H56-Matte Nickel PVD ; H60-Matte Blush PVD ; H62-Blush PVD ; H64-Graphite PVD ; H65-Matte Graphite PVD ; H66-Umber PVD ; H67-Matte Umber PVD For explanation: A complete code number compile three information’s, for example: A54-A02-41SGB/W (SERIE-FINISH-ARTICLE). This would give you a trim only for wall mounted 3-hole bath mixer in art deco style and polished chrome finish.

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Range of plastic filter heads and housings. Maximum working pressure 8.6 bar. Cold water use only.

Section:

1050 Filters and Housings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Aqua Cure Ltd. model and operating parameters on adhesive label on body.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

30/06/2030

Model:

Filter heads - ¼” & 3/8” Push Fit: 22010240 & 22010245. Filter housings - 32.55mm ØD to 32.71mm ØD: 22012458, 22000542, 22000548, 22000540 & 22000566. 22000454 – ¼” push fit.

Approval Holder:

Aqua Cure Limited

Company Name

Aqua Cure Limited

Address

3A & 3B Dakota business park Dakota way Burscough Lancashire

Postcode

L408AF

Country

United Kingdom

Phone

01704 516916

General Email

Phill.mayer@aquacure.co.uk

View All Listings by this Company

U Profile range of press fittings incorporating EPDM ‘O’-rings. For use with MONFLEX PEXB/AL/PEXB MULTILAYER PIPES. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2304380

Size:

16-32mm. BSP threaded connections: ½” - 1½” (M) or (F).

Marking:

Fitting: Ebrille & size Pipe: Ebrille and product info on pipe.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

EBRILLE 'U' FITTINGS Straight: REM16X16 REM18X18 REM20X20 REM25X25 REM32X32 Reduced straight: REMR20X16 REMR20X18 REMR25X16 REMR25X18 REMR25X20 REMR26X16 REMR26X18 REMR26X20 REMR32X16 REMR32X18 REMR32X20 REMR32X25 REMR32X26 Male straight: REDFM16X1/2 REDFM16X3/4 REDFM18X1/2 REDFM20X1/2 REDFM20X1 REDFM25X1/2 REDFM25X3/4 REDFM25X1 REDFM26X1/2 REDFM26X3/4 REDFM26X1 REDFM32X1/2 REDFM32X3/4 REDFM32X1 REDFM32X11/4 REDFM32X11/2 Female straight: REDFF16X1/2 REDFF16X3/4 REDFF16X1 REDFF18X1/2 REDFF18X3/4 REDFF20X1/2 REDFF20X3/4 REDFF20X1 REDFF25X1/2 REDFF25X3/4 REDFF25X1 REDFF26X1/2 REDFF26X3/4 REDFF26X1 REDFF32X1/2 REDFF32X3/4 REDFF32X1 REDFF32X11/4 REDFF32X11/2 Elbow: RE90°16X16 RE90°18X18 RE90°20X20 RE90°25X25 RE90°26X26 RE90°32X32 Male elbow: RE90°FM16X1/2 RE90°FM16X3/4 RE90°FM18X1/2 RE90°FM18X3/4 RE90°FM20X1/2 RE90°FM20X3/4 RE90°FM20X1 RE90°FM25X1/2 RE90°FM25X3/4 RE90°FM25X1 RE90°FM26X1/2 RE90°FM26X3/4 RE90°FM26X1 RE90°FM32X1/2 RE90°FM32X3/4 RE90°FM32X1 RE90°FM32X11/4 Female elbow: RE90°FF16X1/2 RE90°FF16X3/4 RE90°FF18X1/2 RE90°FF18X3/4 RE90°FF20X1/2 RE90°FF20X3/4 RE90°FF20X1 RE90°FF25X1/2 RE90°FF25X3/4 RE90°FF25X1 RE90°FF26X1/2 RE90°FF26X3/4 RE90°FF26X1 RE90°FF32X1/2 RE90°FF32X3/4 RE90°FF32X1 RE90°FF32X1 1/4 Wall plated elbow: RE90°M16X1/2 RE90°M16X3/4 RE90°M18X1/2 RE90°M20X1/2 RE90°M20X3/4 Tee: RET16X16X16 RET18X18X18 RET20X20X20 RET25X25X25 RET26X26X26 RET32X32X32 Reduced tee: RETR16X20X16 RETR16X25X16 RETR16X26X16 RETR18X16X18 RETR18X20X18 RETR18X25X18 RETR18X26X18 RETR20X16X20 RETR20X18X20 RETR20X25X20 RETR25X16X25 RETR25X16X16 RETR26X16X16 RETR25X18X25 RETR25X20X25 RETR25X32X25 RETR20X26X20 RETR26X16X26 RETR26X18X26 RETR26X20X26 RETR26X32X26 RETR32X16X32 RETR32X18X32 RETR32X20X32 RETR32X25X32 RETR25X16X20 RETR32X20X25 RETR26X16X20 RETR32X20X26 RETR20X16X16 RETR20X20X16 RETR25X25X18 RETR25X25X20 RETR25X18X18 RETR25X20X20 RETR25X16X20 RETR32X20X25 RETR26X26X16 RETR26X26X18 RETR26X26X20 RETR26X18X18 RETR26X20X20 RETR26X20X16 RETR32X20X26 RETR32X32X16 RETR32X32X20 RETR32X32X26 RETR32X25X25 RETR32X26X26 RETR32X26X32 Male tee: RETFM16X1/2X16 RETFM16X3/4X16 RETFM20X1/2X20 RETFM20X3/4X20 Female tee: RETFF16X1/2X16 RETFF16X3/4X16 RETFF18X1/2X18 RETFF18X3/4X18 RETFF20X1/2X20 RETFF20X3/4X20 RETFF20X1X20 RETFF25X1/2X25 RETFF25X3/4X25 RETFF25X1X25 RETFF26X1X26 RETFF26X3/4X26 RETFF26X1X26 RETTFF32X1/2X32 RETFF32X3/4X32 RETFF32X1X32 RETFF32X11/4X32 Cap: REC16 REC18 REC20 REC25 REC26 REC32 Female union: REDFFL16X1/2 REDFFL16X3/4 REDFFL20X1/2 REDFFL20X3/4 REDFFL25X1/2 REDFFL25X3/4 REDFFL25X1 REDFFL26X1/2 REDFFL26X3/4 REDFFL26X1 REDFFL32X1 TO BE USED WITH MONOFLEX PEXB/ALPEXB MULTILAYER PIPES: MZ16X2MONFLEXMT100 MZ16X2MONFLEXMT200 MZ16X2MONFLEXMT400 MZ18X2MONFLEXMT100 MZ20X2MONFLEXMT100 MZ20X2MONFLEXMT200 MZ20X2MONFLEXMT400 MZ25X2,5MONFLEXMT100 MZ26X3MONFLEXMT100 MZ32X3MONFLEXMT100

Approval Holder:

Ebrille s.r.l.

Company Name

Ebrille s.r.l.

Address

Administration and Esablishment, Straded Canelli, 53A - 14049 Nizza Monferrato AT

Country

Italy

View All Listings by this Company

Range of stainless steel (SUS304/316L) crimp fittings incorporating EPDM ‘O’-rings. For use with Mingshi stainless steel pipes (SUS304/316L). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303405

Size:

see model

Marking:

BECLI Logo, size & material on pipe and fitting body.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

Male threaded coupler: S15х1/2"W: 15 x ½” BSP (M), S15х3/4"W: 15 x ¾” BSP (M), S18х1/2"W: 18 x ½” BSP (M), S18х3/4"W: 18 x ¾” BSP (M), S22х1/2"W: 22 x ½” BSP (M), S22х3/4"W: 22 x ¾” BSP (M), S22х1"W: 22 x 1” BSP (M), S28х3/4"W: 28 x ¾” BSP (M), S28x1"W: 28 x 1” BSP (M), S35x1"W: 35 x 1” BSP (M), S35x1 1/4"W: 35 x 1¼” BSP (M), S42х1 1/2"W: 42 x 1½” BSP (M), S54х2"W: 54 x 2” BSP (M). Male threaded coupler with straight pipe: 15х1/2"W: 15 x ½” BSP (M), 15x3/4"W: 15 x ¾” BSP (M), 18х1/2"W: 18 x ½” BSP (M), 18х3/4"W: 18 x ¾” BSP (M), 18x1"W: 18 x 1” BSP (M), 22х1/2"W: 22 x ½” BSP (M), 22х3/4"W: 22 x ¾” BSP (M), 22x1"W: 22 x 1” BSP (M), 28х3/4"W: 28 x ¾” BSP (M), 28х1"W: 28 x 1” BSP (M), 35х1 1/4"W: 35 x 1¼” BSP (M), 42х1 1/2"W: 42 x 1½” BSP (M), 54х2"W: 54 x 2” BSP (M). Female threaded coupler: S15х1/2"N: 15 x ½” BSP (F), S18х1/2"N: 18 x ½” BSP (F), S18х3/4"N: 18 x ¾” BSP (F), S22х1/2"N: 22 x ½” BSP (F), S22х3/4"N: 22 x ¾” BSP (F), S28х3/4"N: 28 x ¾” BSP (F), S28х1"N: 28 x 1” BSP (F), S35x1"N: 35 x 1” BSP (F), S35x1 1/4"N: 35 x 1¼” BSP (F), S42х1 1/2"N: 42 x 1½” BSP (F), S54х2"N: 54 x 2” BSP (F). Female threaded coupler with straight pipe: 15х1/2"N: 15 x ½” BSP (F), 15x3/4"N: 15 x ¾” BSP (F), 18х1/2"N: 18 x ½” BSP (F), 18х3/4"N: 18 x ¾” BSP (F), 18x1"N: 18 x 1” BSP (F), 22х1/2"N: 22 x ½” BSP (F), 22х3/4"N: 22 x ¾” BSP (F), 22x1"N: 22 x 1” BSP (F), 28х3/4"N: 28 x ¾” BSP (F), 28х1"N: 28 x 1” BSP (F), 35х1 1/4"N: 35 x 1¼” BSP (F), 42х1 1/2"N: 42 x 1½” BSP (F), 54х2"N: 54 x 2” BSP (F). Coupler: S15: 15 x 15mm, S18х15: 18 x 15mm, S18: 18 x 18mm, S22х18: 22 x 18mm, S22х15: 22 x 15mm, S22: 22 x 22mm, S28х15: 28 x 15mm, S28х22: 28 x 22mm, S28: 28 x 28mm, S35х28: 35 x 28mm, S35: 35 x 35mm, S42х35: 42 x 35mm, S42: 42 x 42mm, S54х42: 54 x 42mm, S54: 54 x 54mm. Coupler with straight pipe: S18х15Ⅱ: 18 x 15mm, S22х15Ⅱ: 22 x 15mm, S22х18Ⅱ: 22 x 18mm, S28х15Ⅱ: 28 x 15mm, S28х18Ⅱ: 28 x 18mm, S28х22Ⅱ: 28 x 22mm, S35х15Ⅱ: 35 x 15mm, S35х18Ⅱ: 35 x 18mm, S35х22Ⅱ: 35 x 22mm, S35х28Ⅱ: 35 x 28mm, S42х22Ⅱ: 42 x 22mm, S42х28Ⅱ: 42 x 28mm, S42х35Ⅱ: 42 x 35mm, S54х28Ⅱ: 54 x 28mm, S54х35Ⅱ: 54 x 35mm, S54х42Ⅱ: 54 x 42mm. Adjustable connector: S15Ⅱ: 15 x 15mm, S18Ⅱ: 18 x 18mm, S22Ⅱ: 22 x 22mm, S28Ⅱ: 28 x 28mm, S35Ⅱ: 35 x 35mm, S42Ⅱ: 42 x 42mm, S54Ⅱ: 54 x 54mm. Union: H15х1/2": 15 x ½” captive nut, H15х3/4": 15 x ¾” captive nut, H18х1/2": 18 x ½” captive nut, H18х3/4": 18 x ¾” captive nut, H22х1/2": 22 x ½” captive nut, H22х3/4": 22 x ¾” captive nut, H28х3/4": 28 x ¾” captive nut, H28х1": 28 x 1” captive nut, H35x1": 35 x 1” captive nut, H35x1 1/4": 35 x 1¼” captive nut, H42х1 1/2": 42 x 1½” captive nut, H54х2": 54 x 2” captive nut. Tee: T15: 15 x 15 x 15mm, T18х15х18: 18 x 15 x 18mm, T18: 18 x 18 x 18mm, T22х18х22: 22 x 18 x 22mm, T22х15х22: 22 x 15 x 22mm, T22: 22 x 22 x 22mm, T28x15x28: 28 x 15 x 28mm, T28х22х22: 28 x 22 x 22mm, T28x22x28: 28 x 22 x 28mm, T28: 28 x 28 x 28mm, T35x15x35: 35 x 15 x 35mm, T35x22x35: 35 x 22 x 35mm, T35x28x35: 35 x 28 x 35mm, T35: 35 x 35 x 35mm, T42х35х42: 42 x 35 x 42mm, T42: 42 x 42 x 42mm, T54х42х54: 54 x 42 x 54mm, T54: 54 x 54 x 54mm. Female threaded Tee: T15х1/2"Nx15: 15 x ½” BSP (F) x 15mm, T18х1/2"Nx18: 18 x ½” BSP (F) x 18mm, T18х3/4"Nx18: 18 x ¾” BSP (F) x 18mm, T22х1/2"Nx22: 22 x ½” BSP (F) x 22mm, T22х3/4"Nx22: 22 x ¾” BSP (F) x 22mm, T28х1/2"Nx28: 28 x ½” BSP (F) x 28mm, T28х3/4"Nx28: 28 x ¾” BSP (F) x 28mm, T28х1"Nx28: 28 x 1” BSP (F) x 28mm, T35х1"Nx35: 35 x 1” BSP (F) x 35mm, T35х1 1/4"Nx35: 35 x 1¼” BSP (F) x 35mm, T42х1 1/2"Nх42: 42 x 1½” BSP (F) x 42mm, T54х2"Nх54: 54 x 2” BSP (F) x 54mm. Male threaded Tee: T15х1/2"Wx15: 15 x ½” BSP (M) x 15mm, T18х1/2"Wx18: 18 x ½” BSP (M) x 18mm, T18х3/4"Wx18: 18 x ¾” BSP (M) x 18mm, T22х1/2"Wx22: 22 x ½” BSP (M) x 22mm, T22х3/4"Wx22: 22 x ¾” BSP (M) x 22mm, T28х1/2"Wx28: 28 x ½” BSP (M) x 28mm, T28х3/4"Wx28: 28 x ¾” BSP (M) x 28mm, T28х1"Wx28: 28 x 1” BSP (M) x 28mm, T35х1"Wx35: 35 x 1” BSP (M) x 35mm, T35х1 1/4"Wx35: 35 x 1¼” BSP (M) x 35mm, T42х1 1/2"Wх42: 35 x 1½” BSP (M) x 35mm, T54х2"Wх54: 54 x 2” BSP (M) x 54mm. 90°B Elbow: L15a: 15 x 15mm, L18а: 18 x 18mm, L22a: 22 x 22mm, L28a: 28 x 28mm, L35a: 35 x 35mm, L42а: 42 x 42mm, L54а: 54 x 54mm. 90°A Elbow: L15: 15 x 15mm, L18: 18 x 18mm, L22: 22 x 22mm, L28: 28 x 28mm, L35: 35 x 35mm, L42: 42 x 42mm, L54: 54 x 54mm. Female threaded elbow: L15х1/2"N: 15 x ½” BSP (F), L18х1/2"N: 18 x ½” BSP (F), L18х3/4"N: 18 x ¾” BSP (F), L22х1/2"N: 22 x ½” BSP (F), L22х3/4"N: 22 x ¾” BSP (F), L28х3/4"N: 28 x ¾” BSP (F), L35х1"N: 35 x 1” BSP (F). Male threaded elbow: L15x1/2"W: 15 x ½” BSP (M), L18х1/2"W: 18 x ½” BSP (M), L18х3/4"W: 18 x ¾” BSP (M), L22x1/2"W: 22 x ½” BSP (M), L22x3/4"W: 22 x ¾” BSP (M), L28x3/4"W: 28 x ¾” BSP (M), L35x1"W: 35 x 1” BSP (M). Female threaded elbow with base: L15х1/2"N(a): 15 x ½” BSP (F), L18х1/2"N(a): 18 x ½” BSP (F), L22х1/2"N(a): 22 x ½” BSP (F), L22х3/4"N(a): 22 x ¾” BSP (F). 45°B Elbow: 45°L15a: 15 x 15mm, 45°L18а: 18 x 18mm, 45°L22a: 22 x 22mm, 45°L28a: 28 x 28mm, 45°L35a: 35 x 35mm, 45°L42а: 42 x 42mm, 45°L54а: 54 x 54mm. 45°A Elbow: 45°L15: 15 x 15mm, 45°L18: 18 x 18mm, 45°L22: 22 x 22mm, 45°L28: 28 x 28mm, 45°L35: 35 x 35mm, 45°L42: 42 x 42mm, 45°L54: 54 x 54mm. One end pipe bridge: Ω15a: 15 x 15mm, Ω18a: 18 x 18mm, Ω22a: 22 x 22mm. Pipe Bridge: Ω15: 15 x 15mm, Ω18: 18 x 18mm, Ω22: 22 x 22mm, Ω28: 28 x 28mm. Cap: D15: 15 x 15mm, D18: 18 x 18mm, D22: 22 x 22mm, D28: 28 x 28mm, D35: 35 x 35mm, D42: 42 x 42mm, D54: 54 x 54mm. Pipe: Mingshi Stainless Steel Pipe (To EN 10312) 15mm to 54mm.

Approval Holder:

Eduardo Alvarez LDA

Company Name

Eduardo Alvarez LDA

Address

Rua Central N. 24 Cabecas 2300-317 Tomar

Country

Portugal

Phone

0035 1919414508

General Email

trading.ealvarez@gmail.com

View All Listings by this Company

Range of press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404075

Size:

For size see models

Marking:

Valtren logo 'indi', size, WRAS and date of manufacture (mm/yy) on body

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

STRAIGHT COUPLING CxC: 60111515 60112222 60112828 60113535 60114242 60115454 SLIP COUPLING C x C: 60171515 60172222 60172828 60173535 60174242 60175454 REDUCING COUPLING C x C: 60112215 60112815 60112822 60113515 60113522 60113528 60114215 60114222 60114228 60114235 60115415 60115422 60115428 60115435 60115442 FITTING REDUCER F x C: 60132215 60132815 60132822 60133515 60133522 60133528 60134215 60134222 60134228 60134235 60135415 60135422 60135428 60135435 60135442 90DEG ELBOW C x C: 60411515 60412222 60412828 60413535 60414242 60415454 90DEG STREET ELBOW F x C: 60431515 60432222 60432828 60433535 60434242 60435454 45DEG ELBOW C x C: 60451515 60452222 60452828 60453535 60454242 60455454 45DEG STREET ELBOW F x C: 60481515 60482222 60482828 60483535 60484242 60485454 CAP C x C: 60811515 60812222 60812828 60813535 60814242 60815454 EQUAL TEE C x C: 60151515 60222222 60282828 60353535 60424242 60545454 PART CROSSOVER F x C: 60271515 - 15mm 60272222 - 22mm CROSSOVER C x C: 60291515 - 15mm 60292222 - 22mm REDUCER ELBOW 60412215 - 22mm x 15mm REDUCING TEE: 60221515 60221522 60282222 60282228 60222215 60282815 60282822 60353515 60353522 60353528 60424215 60424222 60424228 60424235 60545415 60545422 60545428 60545435 60545442

Approval Holder:

Valtren Distribution Ltd

Company Name

Valtren Distribution Ltd

Address

10 Aylesbury Court Lapworth

Postcode

B94 6BE

Country

United Kingdom

General Email

07771 755057

View All Listings by this Company

Hyddro Range of stainless steel (SUS304/316L) crimp fittings incorporating EPDM ‘O’-rings. For use with Hyddro stainless steel pipes (SUS304/316L). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303406

Size:

see model

Marking:

Hyddro by GFS, size & material on pipe and fitting body.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

Male threaded coupler: HYD-SS-MC-01 S15х1/2"W: 15 x ½” BSP (M) HYD-SS-MC-02 S15х3/4"W: 15 x ¾” BSP (M) HYD-SS-MC-03 S18х1/2"W: 18 x ½” BSP (M) HYD-SS-MC-04 S18х3/4"W: 18 x ¾” BSP (M) HYD-SS-MC-05 S22х1/2"W: 22 x ½” BSP (M) HYD-SS-MC-06 S22х3/4"W: 22 x ¾” BSP (M) HYD-SS-MC-07 S22х1"W: 22 x 1” BSP (M) HYD-SS-MC-08 S28х3/4"W: 28 x ¾” BSP (M) HYD-SS-MC-09 S28x1"W: 28 x 1” BSP (M) HYD-SS-MC-10 S35x1"W: 35 x 1” BSP (M) HYD-SS-MC-11 S35x1 1/4"W: 35 x 1¼” BSP (M) HYD-SS-MC-12 S42х1 1/2"W: 42 x 1½” BSP (M) HYD-SS-MC-13 S54х2"W: 54 x 2” BSP (M). Male threaded coupler with straight pipe: HYD-SS-MP-01 15х1/2"W: 15 x ½” BSP (M) HYD-SS-MP-02 15x3/4"W: 15 x ¾” BSP (M) HYD-SS-MP-03 18х1/2"W: 18 x ½” BSP (M) HYD-SS-MP-04 18х3/4"W: 18 x ¾” BSP (M) HYD-SS-MP-05 18x1"W: 18 x 1” BSP (M) HYD-SS-MP-06 22х1/2"W: 22 x ½” BSP (M) HYD-SS-MP-07 22х3/4"W: 22 x ¾” BSP (M) HYD-SS-MP-08 22x1"W: 22 x 1” BSP (M) HYD-SS-MP-09 28х3/4"W: 28 x ¾” BSP (M) HYD-SS-MP-10 28х1"W: 28 x 1” BSP (M) HYD-SS-MP-11 35х1 1/4"W: 35 x 1¼” BSP (M) HYD-SS-MP-12 42х1 1/2"W: 42 x 1½” BSP (M) HYD-SS-MP-13 54х2"W: 54 x 2” BSP (M). Female threaded coupler: HYD-SS-FC-01 S15х1/2"N: 15 x ½” BSP (F) HYD-SS-FC-02 S18х1/2"N: 18 x ½” BSP (F) HYD-SS-FC-03 S18х3/4"N: 18 x ¾” BSP (F) HYD-SS-FC-04 S22х1/2"N: 22 x ½” BSP (F) HYD-SS-FC-05 S22х3/4"N: 22 x ¾” BSP (F) HYD-SS-FC-06 S28х3/4"N: 28 x ¾” BSP (F) HYD-SS-FC-07 S28х1"N: 28 x 1” BSP (F) HYD-SS-FC-08 S35x1"N: 35 x 1” BSP (F) HYD-SS-FC-09 S35x1 1/4"N: 35 x 1¼” BSP (F) HYD-SS-FC-10 S42х1 1/2"N: 42 x 1½” BSP (F) HYD-SS-FC-11 S54х2"N: 54 x 2” BSP (F). Female threaded coupler with straight pipe: HYD-SS-FP-01 15х1/2"N: 15 x ½” BSP (F) HYD-SS-FP-02 15x3/4"N: 15 x ¾” BSP (F) HYD-SS-FP-03 18х1/2"N: 18 x ½” BSP (F) HYD-SS-FP-04 18х3/4"N: 18 x ¾” BSP (F) HYD-SS-FP-05 18x1"N: 18 x 1” BSP (F) HYD-SS-FP-06 22х1/2"N: 22 x ½” BSP (F) HYD-SS-FP-07 22х3/4"N: 22 x ¾” BSP (F) HYD-SS-FP-08 22x1"N: 22 x 1” BSP (F) HYD-SS-FP-09 28х3/4"N: 28 x ¾” BSP (F) HYD-SS-FP-10 28х1"N: 28 x 1” BSP (F) HYD-SS-FP-11 35х1 1/4"N: 35 x 1¼” BSP (F) HYD-SS-FP-12 42х1 1/2"N: 42 x 1½” BSP (F) HYD-SS-FP-13 54х2"N: 54 x 2” BSP (F). Coupler: HYD-SS-CP-01 S15: 15 x 15mm HYD-SS-CP-02 S18х15: 18 x 15mm HYD-SS-CP-03 S18: 18 x 18mm HYD-SS-CP-04 S22х18: 22 x 18mm HYD-SS-CP-05 S22х15: 22 x 15mm HYD-SS-CP-06 S22: 22 x 22mm HYD-SS-CP-07 S28х15: 28 x 15mm HYD-SS-CP-08 S28х22: 28 x 22mm HYD-SS-CP-09 S28: 28 x 28mm HYD-SS-CP-10 S35х28: 35 x 28mm HYD-SS-CP-11 S35: 35 x 35mm HYD-SS-CP-12 S42х35: 42 x 35mm HYD-SS-CP-13 S42: 42 x 42mm HYD-SS-CP-14 S54х42: 54 x 42mm HYD-SS-CP-15 S54: 54 x 54mm. Coupler with straight pipe: HYD-SS-SP-01 S18х15Ⅱ: 18 x 15mm HYD-SS-SP-02 S22х15Ⅱ: 22 x 15mm HYD-SS-SP-03 S22х18Ⅱ: 22 x 18mm HYD-SS-SP-04 S28х15Ⅱ: 28 x 15mm HYD-SS-SP-05 S28х18Ⅱ: 28 x 18mm HYD-SS-SP-06 S28х22Ⅱ: 28 x 22mm HYD-SS-SP-07 S35х15Ⅱ: 35 x 15mm HYD-SS-SP-08 S35х18Ⅱ: 35 x 18mm HYD-SS-SP-09 S35х22Ⅱ: 35 x 22mm HYD-SS-SP-10 S35х28Ⅱ: 35 x 28mm HYD-SS-SP-11 S42х22Ⅱ: 42 x 22mm HYD-SS-SP-12 S42х28Ⅱ: 42 x 28mm HYD-SS-SP-13 S42х35Ⅱ: 42 x 35mm HYD-SS-SP-14 S54х28Ⅱ: 54 x 28mm HYD-SS-SP-15 S54х35Ⅱ: 54 x 35mm HYD-SS-SP-16 S54х42Ⅱ: 54 x 42mm. Adjustable connector: HYD-SS-AC-01 S15Ⅱ: 15 x 15mm HYD-SS-AC-02 S18Ⅱ: 18 x 18mm HYD-SS-AC-03 S22Ⅱ: 22 x 22mm HYD-SS-AC-04 S28Ⅱ: 28 x 28mm HYD-SS-AC-05 S35Ⅱ: 35 x 35mm HYD-SS-AC-06 S42Ⅱ: 42 x 42mm HYD-SS-AC-07 S54Ⅱ: 54 x 54mm. Union: HYD-SS-UN-01 H15х1/2": 15 x ½” captive nut HYD-SS-UN-02 H15х3/4": 15 x ¾” captive nut HYD-SS-UN-03 H18х1/2": 18 x ½” captive nut HYD-SS-UN-04 H18х3/4": 18 x ¾” captive nut HYD-SS-UN-05 H22х1/2": 22 x ½” captive nut HYD-SS-UN-06 H22х3/4": 22 x ¾” captive nut HYD-SS-UN-07 H28х3/4": 28 x ¾” captive nut HYD-SS-UN-08 H28х1": 28 x 1” captive nut HYD-SS-UN-09 H35x1": 35 x 1” captive nut HYD-SS-UN-10 H35x1 1/4": 35 x 1¼” captive nut HYD-SS-UN-11 H42х1 1/2": 42 x 1½” captive nut HYD-SS-UN-12 H54х2": 54 x 2” captive nut Tee: HYD-SS-TE-01 T15: 15 x 15 x 15mm HYD-SS-TE-02 T18х15х18: 18 x 15 x 18mm HYD-SS-TE-03 T18: 18 x 18 x 18mm HYD-SS-TE-04 T22х18х22: 22 x 18 x 22mm HYD-SS-TE-05 T22х15х22: 22 x 15 x 22mm HYD-SS-TE-06 T22: 22 x 22 x 22mm HYD-SS-TE-07 T28x15x28: 28 x 15 x 28mm HYD-SS-TE-08 T28х22х22: 28 x 22 x 22mm HYD-SS-TE-09 T28x22x28: 28 x 22 x 28mm HYD-SS-TE-10 T28: 28 x 28 x 28mm HYD-SS-TE-11 T35x15x35: 35 x 15 x 35mm HYD-SS-TE-12 T35x22x35: 35 x 22 x 35mm HYD-SS-TE-13 T35x28x35: 35 x 28 x 35mm HYD-SS-TE-14 T35: 35 x 35 x 35mm HYD-SS-TE-15 T42х35х42: 42 x 35 x 42mm HYD-SS-TE-16 T42: 42 x 42 x 42mm HYD-SS-TE-17 T54х42х54: 54 x 42 x 54mm HYD-SS-TE-18 T54: 54 x 54 x 54mm. Female threaded Tee: HYD-SS-FT-01 T15х1/2"Nx15: 15 x ½” BSP (F) x 15mm HYD-SS-FT-02 T18х1/2"Nx18: 18 x ½” BSP (F) x 18mm HYD-SS-FT-03 T18х3/4"Nx18: 18 x ¾” BSP (F) x 18mm HYD-SS-FT-04 T22х1/2"Nx22: 22 x ½” BSP (F) x 22mm HYD-SS-FT-05 T22х3/4"Nx22: 22 x ¾” BSP (F) x 22mm HYD-SS-FT-06 T28х1/2"Nx28: 28 x ½” BSP (F) x 28mm HYD-SS-FT-07 T28х3/4"Nx28: 28 x ¾” BSP (F) x 28mm HYD-SS-FT-08 T28х1"Nx28: 28 x 1” BSP (F) x 28mm HYD-SS-FT-09 T35х1"Nx35: 35 x 1” BSP (F) x 35mm HYD-SS-FT-10 T35х1 1/4"Nx35: 35 x 1¼” BSP (F) x 35mm HYD-SS-FT-11 T42х1 1/2"Nх42: 42 x 1½” BSP (F) x 42mm HYD-SS-FT-12 T54х2"Nх54: 54 x 2” BSP (F) x 54mm. Male threaded Tee: HYD-SS-MT-01 T15х1/2"Wx15: 15 x ½” BSP (M) x 15mm HYD-SS-MT-02 T18х1/2"Wx18: 18 x ½” BSP (M) x 18mm HYD-SS-MT-03 T18х3/4"Wx18: 18 x ¾” BSP (M) x 18mm HYD-SS-MT-04 T22х1/2"Wx22: 22 x ½” BSP (M) x 22mm HYD-SS-MT-05 T22х3/4"Wx22: 22 x ¾” BSP (M) x 22mm HYD-SS-MT-06 T28х1/2"Wx28: 28 x ½” BSP (M) x 28mm HYD-SS-MT-07 T28х3/4"Wx28: 28 x ¾” BSP (M) x 28mm HYD-SS-MT-08 T28х1"Wx28: 28 x 1” BSP (M) x 28mm HYD-SS-MT-09 T35х1"Wx35: 35 x 1” BSP (M) x 35mm HYD-SS-MT-10 T35х1 1/4"Wx35: 35 x 1¼” BSP (M) x 35mm HYD-SS-MT-11 T42х1 1/2"Wх42: 35 x 1½” BSP (M) x 35mm HYD-SS-MT-12 T54х2"Wх54: 54 x 2” BSP (M) x 54mm. 90°B Elbow: HYD-SS-BE-01 L15a: 15 x 15mm HYD-SS-BE-02 L18а: 18 x 18mm HYD-SS-BE-03 L22a: 22 x 22mm HYD-SS-BE-04 L28a: 28 x 28mm HYD-SS-BE-05 L35a: 35 x 35mm HYD-SS-BE-06 L42а: 42 x 42mm HYD-SS-BE-07 L54а: 54 x 54mm. 90°A Elbow: HYD-SS-AE-01 L15: 15 x 15mm, HYD-SS-AE-02 L18: 18 x 18mm HYD-SS-AE-03 L22: 22 x 22mm HYD-SS-AE-04 L28: 28 x 28mm HYD-SS-AE-05 L35: 35 x 35mm HYD-SS-AE-06 L42: 42 x 42mm HYD-SS-AE-07 L54: 54 x 54mm. Female threaded elbow: HYD-SS-FE-01 L15х1/2"N: 15 x ½” BSP (F) HYD-SS-FE-02 L18х1/2"N: 18 x ½” BSP (F) HYD-SS-FE-03 L18х3/4"N: 18 x ¾” BSP (F) HYD-SS-FE-04 L22х1/2"N: 22 x ½” BSP (F) HYD-SS-FE-05 L22х3/4"N: 22 x ¾” BSP (F) HYD-SS-FE-06 L28х3/4"N: 28 x ¾” BSP (F) HYD-SS-FE-07 L35х1"N: 35 x 1” BSP (F). Male threaded elbow: HYD-SS-ME-01 L15x1/2"W: 15 x ½” BSP (M) HYD-SS-ME-02 L18х1/2"W: 18 x ½” BSP (M) HYD-SS-ME-03 L18х3/4"W: 18 x ¾” BSP (M) HYD-SS-ME-04 L22x1/2"W: 22 x ½” BSP (M) HYD-SS-ME-05 L22x3/4"W: 22 x ¾” BSP (M) HYD-SS-ME-06 L28x3/4"W: 28 x ¾” BSP (M) HYD-SS-ME-07 L35x1"W: 35 x 1” BSP (M). Female threaded elbow with base: HYD-SS-FB-01 L15х1/2"N(a): 15 x ½” BSP (F) HYD-SS-FB-02 L18х1/2"N(a): 18 x ½” BSP (F) HYD-SS-FB-03 L22х1/2"N(a): 22 x ½” BSP (F) HYD-SS-FB-04 L22х3/4"N(a): 22 x ¾” BSP (F). 45°B Elbow: HYD-SS-OBE-01 45°L15a: 15 x 15mm HYD-SS-OBE-02 45°L18а: 18 x 18mm HYD-SS-OBE-03 45°L22a: 22 x 22mm HYD-SS-OBE-04 45°L28a: 28 x 28mm HYD-SS-OBE-05 45°L35a: 35 x 35mm HYD-SS-OBE-06 45°L42а: 42 x 42mm HYD-SS-OBE-07 45°L54а: 54 x 54mm. 45°A Elbow: HYD-SS-OAE-01 45°L15: 15 x 15mm HYD-SS-OAE-02 45°L18: 18 x 18mm HYD-SS-OAE-03 45°L22: 22 x 22mm HYD-SS-OAE-04 45°L28: 28 x 28mm HYD-SS-OAE-05 45°L35: 35 x 35mm HYD-SS-OAE-06 45°L42: 42 x 42mm HYD-SS-OAE-07 45°L54: 54 x 54mm One end pipe bridge: HYD-SS-PCO-01 Ω15a: 15 x 15mm HYD-SS-PCO-02 Ω18a: 18 x 18mm HYD-SS-PCO-03 Ω22a: 22 x 22mm Pipe Bridge: HYD-SS-FCO-01 Ω15: 15 x 15mm HYD-SS-FCO-02 Ω18: 18 x 18mm HYD-SS-FCO-03 Ω22: 22 x 22mm HYD-SS-FCO-04 Ω28: 28 x 28mm. Cap: HYD-SS-CAP-01 D15: 15 x 15mm HYD-SS-CAP-02 D18: 18 x 18mm HYD-SS-CAP-03 D22: 22 x 22mm HYD-SS-CAP-04 D28: 28 x 28mm HYD-SS-CAP-05 D35: 35 x 35mm HYD-SS-CAP-06 D42: 42 x 42mm HYD-SS-CAP-07 D54: 54 x 54mm Pipe: HYD-SS-PI-15 15mm HYD-SS-PI-22 22mm HYD-SS-PI-28 28mm HYD-SS-PI-35 35mm HYD-SS-PI-42 42mm HYD-SS-PI-54 54mm

Approval Holder:

Merchant Supplies Distribution Ltd

Company Name

Merchant Supplies Distribution Ltd

Address

Unit 2 Merlin Centre Acrewood Way St. Albans

Postcode

AL4 OJY

Phone

0203 915 2557

General Email

murat@gfsflex.com

View All Listings by this Company

Range of Hyddro press fittings incorporating EPDM ‘O’-rings. For use with Hyddro (S-1-0509/10/11/12/17/13) PEX-AL-PEX pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2304382

Size:

16-32mm. BSP threaded connections: ½” - 1½” (M) or (F).

Marking:

Hyddro by GFS and WRAS on fitting. Hyddro by GFS, WRAS, size and product info on pipe.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

Straight: HYD-ST-0101 U (S1216) - 16mm HYD-ST-0102 U (S1418) - 18mm HYD-ST-0103 U (S1620) - 20mm HYD-ST-0104 U (S2025) - 25mm HYD-ST-0109 U (S2026) - 26mm HYD-ST-0105 U (S2632) - 32mm Reduced straight: HYD-RS-0202U (S20*16) 20x16mm HYD-RS-0203 U (S20*18) 20x18mm HYD-RS-0204 U (S25*16) 25x16mm HYD-RS-0205 U (S25*18) 25x18mm HYD-RS-0206 U (S25*20) 25x20mm HYD-RS-0223 U (S26*16) 26x16mm HYD-RS-0224 U (S26*18) 26x18mm HYD-RS-0225 U (S26*20) 26x20mm HYD-RS-0222 U (S32*16) 32x16mm HYD-RS-0226 U (S32*18) 32x18mm HYD-RS-0207 U (S32*20) 32x20mm HYD-RS-0208 U (S32*25) 32x25mm HYD-RS-0227 U (S32*26) 32x26mm. Male straight: HYD-MS-0301 U (S16*1/2"M) 16mmx1/2"Mr HYD-MS-0302 U (S16*3/4"M) 16mmx3/4"Mr HYD-MS-0303 U (S18*1/2"M) 18mmx1/2"Mr HYD-MS-0304 U (S18*3/4"M) 18mmx3/4"Mr HYD-MS-0305 U (S20*1/2"M) 20mmx1/2"Mr HYD-MS-0306 U (S20*3/4"M) 20mmx3/4"Mr HYD-MS-0307 U (S20*1"M) 20mmx1"M HYD-MS-0308 U (S25*1/2"M) 25mmx1/2"Mr HYD-MS-0309 U (S25*3/4"M) 25mmx3/4"Mr HYD-MS-0310 U (S25*1"M) 25mmx1"M HYD-MS-0326 U (S26*1/2"M) 26mmx1/2"Mr HYD-MS-0327 U (S26*3/4"M) 26mmx3/4"Mr HYD-MS-0328 U (S26*1"M) 26mmx1"M HYD-MS-0311 U (S32*1/2"M) 32mmx1/2"M HYD-MS-0312 U (S32*3/4"M) 32mmx3/4"M HYD-MS-0313 U (S32*1"M) 32mmx1"M HYD-MS-0314 U (S32*11/4"M) 32mmx11/4"M HYD-MS-0315 U (S32*11/2"M) 32mmx11/2"M Female straight: HYD-FS-0401 U (S16*1/2"F) 16mmx1/2"F HYD-FS-0402 U (S16*3/4"F) 16mmx3/4"F HYD-FS-0403 U (S16*1"F) 16mmx1"F HYD-FS-0404 U (S18*1/2"F) 18mmx1/2"F HYD-FS-0405 U (S18*3/4"F) 18mmx3/4"F HYD-FS-0407 U (S20*1/2"F) 20mmx1/2"F HYD-FS-0408 U (S20*3/4"F) 20mmx3/4"F HYD-FS-0409 U (S20*1"F) 20mmx1"F HYD-FS-0410 U (S25*1/2"F) 25mmx1/2"F HYD-FS-0411 U (S25*3/4"F) 25mmx3/4"F HYD-FS-0412 U (S25*1"F) 25mmx1"F HYD-FS-0422 U (S26*1/2"F) 26mmx1/2"F HYD-FS-0423 U (S26*3/4"F) 26mmx3/4"F HYD-FS-0424 U (S26*1"F) 26mmx1"F HYD-FS-0413 U (S32*1/2"F) 32mmx1/2"F HYD-FS-0414 U (S32*3/4"F) 32mmx3/4"F HYD-FS-0415 U (S32*1"F) 32mmx1"F HYD-FS-0416 U (S32*11/4"F) 32mmx11/4"F HYD-FS-0417 U (S32*11/2"F) 32mmx11/2"F. Elbow: HYD-EL-0501 U (L1216) 16mm HYD-EL-0502 U (L1418) 18mm HYD-EL-0503 U (L1620) 20mm HYD-EL-0504 U (L2025) 25mm HYD-EL-0509 U (L2026) 26mm HYD-EL-0505 U (L2632) 32mm. Male elbow: HYD-ME-0801 U (L16*1/2"M) 16mmx1/2"M HYD-ME-0802 U (L16*3/4"M) 16mmx3/4"M HYD-ME-0803 U (L18*1/2"M) 18mmx1/2"M HYD-ME-0804 U (L18*3/4"M) 18mmx3/4"M HYD-ME-0805 U (L20*1/2"M) 20mmx1/2"M HYD-ME-0806 U (L20*3/4"M) 20mmx3/4"M HYD-ME-0813 U (L20*1"M) 20mmx1"M HYD-ME-0807 U (L25*1/2"M) 25mmx1/2"M HYD-ME-0808 U (L25*3/4"M) 25mmx3/4"M HYD-ME-0809 U (L25*1"M) 25mmx1"M HYD-ME-0815 U (L26*1/2"M) 26mmx1/2"M HYD-ME-0816 U (L26*3/4"M) 26mmx3/4"M HYD-ME-0817 U (L26*1"M) 26mmx1"M HYD-ME-0810 U (L32*1/2"M) 32mmx1/2"M HYD-ME-0811 U (L32*3/4"M) 32mmx3/4"M HYD-ME-0812 U (L32*1"M) 32mmx1"M HYD-ME-0814 U (L32*1 1/4"M) 32mmx11/4"M Female elbow: HYD-FE-0901 U (L16*1/2"F) 16mmx1/2"F HYD-FE-0902 U (L16*3/4"F) 16mmx3/4"F HYD-FE-0903 U (L18*1/2"F) 18mmx1/2"F HYD-FE-0904 U (L18*3/4"F) 18mmx3/4"F HYD-FE-0905 U (L20*1/2"F) 20mmx1/2"F HYD-FE-0906 U (L20*3/4"F) 20mmx3/4"F HYD-FE-0913 U (L20*1"F) 20mmx1"F HYD-FE-0907 U (L25*1/2"F) 25mmx1/2"F HYD-FE-0908 U (L25*3/4"F) 25mmx3/4"F HYD-FE-0909 U (L25*1"F) 25mmx1"F HYD-FE-0914 U (L26*1/2"F) 26mmx1/2"F HYD-FE-0915 U (L26*3/4"F) 26mmx3/4"F HYD-FE-0916 U (L26*1"F) 26mmx1"F HYD-FE-0910 U (L32*1/2"F) 32mmx1/2"F HYD-FE-0911 U (L32*3/4"F) 32mmx3/4"F HYD-FE-0912 U (L32*1"F) 32mmx1"F HYD-FE-0917 U (L32*1 1/4"F) 32mmx11/4"F Wall plated elbow: HYD-WE-1001 U (L16*1/2"F(A)) 16mmx1/2"F HYD-WE-1002 U (L16*3/4"F(A)) 16mmx3/4"F HYD-WE-1003 U (L18*1/2"F(A)) 18mmx1/2"F HYD-WE-1004 U (L20*1/2"F(A)) 20mmx1/2"F HYD-WE-1006 U (L20*3/4"F(A)) 20mmx3/4"F. Tee: HYD-TE-1101 U (T1216) 16mm HYD-TE-1102 U (T1418) 18mm HYD-TE-1103 U (T1620) 20mm HYD-TE-1104 U (T2025) 25mm HYD-TE-1109 U (T2026) 26mm HYD-TE-1105 U (T2632) 32mm. Reduced tee: HYD-RT-1202 U (T16*20*16) 16x20x16mm HYD-RT-1203 U (T16*25*16) 16x25x16 mm HYD-RT-1255 U (T16*26*16) 16x26x16mm HYD-RT-1204 U (T18*16*18) 18x16x18mm HYD-RT-1205 U (T18*20*18) 18x20x18mm HYD-RT-1206 U (T18*25*18) 18x25x18mm HYD-RT-1256 U (T18*26*18) 18x26x18mm HYD-RT-1207 U (T20*16*20) 20x16x20mm HYD-RT-1208 U (T20*18*20) 20x18x20mm HYD-RT-1209 U (T20*25*20) 20x25x20mm HYD-RT-1211 U (T25*16*25) 25x16x25mm HYD-RT-1259 U (T25*16*16) 25x16x16mm HYD-RT-1260 U (T26*16*16) 26x16x16mm HYD-RT-1212 U (T25*18*25) 25x18x25mm HYD-RT-1213 U (T25*20*25) 25x20x25mm HYD-RT-1214 U (T25*32*25) 25x32x25mm HYD-RT-1240 U (T20*26*20) 20x26x20mm HYD-RT-1241 U (T26*16*26) 26x16x26mm HYD-RT-1242 U (T26*18*26) 26x18x26mm HYD-RT-1243 U (T26*20*26) 26x20x26mm HYD-RT-1244 U (T26*32*26) 26x32x26mm HYD-RT-1215 U (T32*16*32) 32x16x32mm HYD-RT-1216 U (T32*18*32) 32x18x32mm HYD-RT-1217 U (T32*20*32) 32x20x32mm HYD-RT-1263 U (T32*25*32) 32x25x32mm HYD-RT-1225 U (T25*16*20) 25x16x20mm HYD-RT-1226 U (T32*20*25) 32x20x25mm HYD-RT-1246 U (T26*16*20) 26x16x20mm HYD-RT-1247 U (T32*20*25) 32x20x26mm HYD-RT-1218 U (T20*16*16) 20x16x16mm HYD-RT-1219 U (T20*20*16) 20x20x16mm HYD-RT-1220 U (T25*25*18) 25x25x18mm HYD-RT-1221 U (T25*25*20) 25x25x20mm HYD-RT-1222 U (T25*18*18) 25x18x18mm HYD-RT-1223 U (T25*20*20) 25x20x20mm HYD-RT-1224 U (T25*16*20) 25x16x20mm HYD-RT-1227 U (T32*20*25) 32x20x25mm HYD-RT-1261 U (T26*26*16) 26x26x16mm HYD-RT-1248 U (T26*26*18) 26x26x18mm HYD-RT-1249 U (T26*26*20) 26x26x20mm HYD-RT-1250 U (T26*18*18) 26x18x18mm HYD-RT-1251 U (T26*20*20) 26x20x20mm HYD-RT-1252 U (T26*20*16) 26x20x16mm HYD-RT-1253 U (T32*20*26) 32x20x26mm HYD-RT-1254 U (T32*32*16) 32x32x16mm HYD-RT-1264 U (T32*32*20) 32x32x20mm HYD-RT-1257 U (T32*32*26) 32x32x26mm HYD-RT-1262 U (T32*25*25) 32x25x25mm HYD-RT-1258 U (T32*26*26) 32x26x26mm HYD-RT-1245 U (T32*26*32) 32x26x32mm. Male tee: HYD-MT-2801 U (T16*1/2"M*16) 16mmx1/2"Mx16mm HYD-MT-2802 U (T16*3/4"M*16) 16mmx3/4"Mx16mm HYD-MT-2803 U (T20*1/2"M*20) 20mmx1/2"Mx20mm HYD-MT-2804 U (T20*3/4"M*20) 20mmx3/4"Mx20mm. Female tee: HYD-FT-1301 U (T16*1/2"F*16) 16mmx1/2"Fx16mm HYD-FT-1302 U (T16*3/4"F*16) 16mmx3/4"Fx16mm HYD-FT-1303 U (T18*1/2"F*18) 18mmx1/2"Fx18mm HYD-FT-1304 U (T18*3/4"F*18) 18mmx3/4"Fx18mm HYD-FT-1305 U (T20*1/2"F*20) 20mmx1/2"Fx20mm HYD-FT-1306 U (T20*3/4"F*20) 20mmx3/4"Fx20mm HYD-FT-1307 U (T20*1"F*20) 20mmx1"Fx20mm HYD-FT-1308 U (T25*1/2"F*25) 25mmx1/2"Fx25mm HYD-FT-1309 U (T25*3/4"F*25) 25mmx3/4"Fx25mm HYD-FT-1310 U (T25*1"F*25) 25mmx1"Fx25mm HYD-FT-1329 U (T26*1/2"F*26) 26mmx1/2"Fx26mm HYD-FT-1330 U (T26*3/4"F*26) 26mmx3/4"Fx26mm HYD-FT-1331 U (T26*1"F*26) 26mmx1"Fx26mm HYD-FT-1311 U (T32*1/2"F*32) 32mmx1/2"Fx32mm HYD-FT-1312 U (T32*3/4"F*32) 32mmx3/4"Fx32mm HYD-FT-1313 U (T32*1"F*32) 32mmx1"Fx32mm HYD-FT-1314 U (T32*11/4"F*32) 32mmx11/4"Fx32mm Cap: HYD-CP-2601 U (D1216) 16mm HYD-CP-2602 U (D1418) 18mm HYD-CP-2603 U (D1620) 20mm HYD-CP-2604 U (D2025) 25mm HYD-CP-2606 U (D2026) 26mm HYD-CP-2605 U (D2632) 32mm. Female union: YD-FU-2901 U (H16*1/2F) 16mmx1/2"F HYD-FU-2902 U (H16*3/4F) 16mmx3/4"F HYD-FU-2903 U (H20*1/2F) 20mmx1/2"F HYD-FU-2904 U (H20*3/4F) 20mmx3/4"F HYD-FU-2907 U (H25*1/2F) 25mmx1/2"F HYD-FU-2905 U (H25*3/4F) 25mmx3/4"F HYD-FU-2908 U (H25*1F) 25mmx1"F HYD-FU-2909 U (H26*1/2F) 26mmx1/2"F HYD-FU-2910 U (H26*3/4F) 26mmx3/4"F HYD-FU-2911 U (H26*1F) 26mmx1"F HYD-FU-2906 U (H32*1F) 32mmx1"F. Pipe: HYD-PXAX-1620 (PEXALPEX pipe) 16x2.0mm, HYD-PXAX-1820 (PEXALPEX pipe) 18x2.0mm, HYD-PXAX-2020 (PEXALPEX pipe) 20x2.0mm, HYD-PXAX-2525 (PEXALPEX pipe) 25x2.5mm, HYD-PXAX-2630 (PEXALPEX pipe) 26x3.0mm, HYD-PXAX-3230 (PEXALPEX pipe) 32x3.0mm.

Approval Holder:

Merchant Supplies Distribution Ltd

Company Name

Merchant Supplies Distribution Ltd

Address

Unit 2 Merlin Centre Acrewood Way St. Albans

Postcode

AL4 OJY

Phone

0203 915 2557

General Email

murat@gfsflex.com

View All Listings by this Company

Range of brass press fittings for use with copper pipe (manufactured to EN1057:2006 and +A1:2010 Seamless round copper tube, R250 half hard). Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250804708

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

Flowflex logo and size on body.

Installation Requirements:

R001

Expiry date:

31/08/2030

Model:

Male Adaptor: 572210 - 15X1/2B 572211 - 22X3/4B 572212 - 28X1B 572213 - 35X1.1/4B 572214 - 42X1.1/2B 572215 - 54X2B Female Adaptor: 572216 - 15X1/2B 572217 - 22X3/4B 572218 - 28X1B 572219 - 35X1.1/4B 572220 - 42X1.1/2B 572221 - 54X2B Wallplate Elbow: 572222 - 15x½B.

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Manufacturer:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

‘AF’ range of compression fittings with brass or chrome plated brass bodies for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum working temperature 85˚C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2204110

Size:

see model

Marking:

Plumb Bliss logo (PB), Size & month/year of manufacture on fitting body

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

10.1272 Plumb Bliss Compression Coupler Male 15mm x 1/2" 10.1273 Plumb Bliss Compression Coupler Male 15mm x 3/4" 10.1274 Plumb Bliss Compression Coupler Male 22mm x 1/2" 10.1275 Plumb Bliss Compression Coupler Male 22mm x 3/4" 10.1276 Plumb Bliss Compression Coupler Female 15mm x 1/2" 10.1277 Plumb Bliss Compression Coupler Male 15mm x 3/4" 10.1278 Plumb Bliss Compression Coupler Male 22mm x 1/2" 10.1279 Plumb Bliss Compression Coupler Male 22mm x 3/4" 10.1280 Plumb Bliss Brass Compression Tee 15mm x 15mm x 1/2" 10.1281 Plumb Bliss Wall Plate Compression Elbow 15mm x 1/2"

Approval Holder:

Bliss UK Group Ltd

Company Name

Bliss UK Group Ltd

Address

Unit 4A Kinsbourne Farm Wick End Stagsden Bedfordshire

Postcode

MK43 8TS

Country

United Kingdom

Phone

01234 860230

General Email

accounts@blissukgroup.co.uk

View All Listings by this Company

Range of blue epoxy coated ductile iron flanged dismantling fittings with EPDM sealing rings. Maximum working pressure: 16 Bar. Maximum operating temperature: 65°C.

Section:

1220 Fittings for use with Tube and Pipe

Section Subtitle:

Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.

WRAS Approval Number:

250602024

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Flanged - DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1100, DN1200, DN1300, DN1400, DN1500, DN1600, DN1700 & DN1800.

Marking:

DVD Valves, size, pressure and year of manufacturer (YYYY) on adhesive label on body.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

DVD-FDM.

Approval Holder:

DOGUS VANA VE DOKUM SAN. TIC. A.S.

Company Name

DOGUS VANA VE DOKUM SAN. TIC. A.S.

Address

1202/1 SOKAK NO:54/F YENISEHIR IZMIR

Postcode

35170

Country

Turkey

Phone

+905322625938

General Email

hayro@dogusvana.com.tr

View All Listings by this Company

Range of WC dual flush drop valves with ABS bodies and silicone seals. The valves are operated via a two push button assembly for either full or reduced flush and incorporate an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2311107

Size:

2” BSP (M)

Marking:

Plumb Bliss, logo & company website on bottom. WRAS & technical data on side.

Installation Requirements:

R001 R571 R580 R581

Expiry date:

30/11/2028

Model:

10.1260

Approval Holder:

Bliss UK Group Ltd

Company Name

Bliss UK Group Ltd

Address

Unit 4A Kinsbourne Farm Wick End Stagsden Bedfordshire

Postcode

MK43 8TS

Country

United Kingdom

Phone

01234 860230

General Email

accounts@blissukgroup.co.uk

View All Listings by this Company

Range of urinal autosyphons with plastic body and supplied with plastic backnuts.

Section:

1307 Flushing Mechanisms

Section Subtitle:

Urinals.

WRAS Approval Number:

250801701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

B.B.S Auto Syphon, BS 1876 tested & Masefield Beta Ltd. on outer body

Installation Requirements:

R001

Expiry date:

31/08/2030

Model:

BBS Auto Syphon range consisting of; Size 1 - 4.5 litre (1 Gallon): 5½’’ X 1” BSP outlet. 5½’’ X 1¼” BSP outlet. Size 2 - 9 litre (2 Gallon): 6¼’’ X 1” BSP outlet. 6¼’’ X 1¼” BSP outlet. Size 3 - 13.5 litre (3 Gallon): 7½’’ X 1” BSP outlet. 7½’’ X 1¼” BSP outlet. Size 4 - 18 litre (4 Gallon): 8¼’’ X 1” BSP outlet. 8¼’’ X 1¼” BSP outlet. Size 5 - 22.5 litre (5 gallon): 9¼’’ X 1” BSP outlet. 9¼’’ X 1¼” BSP outlet.

Approval Holder:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Manufacturer:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Range of pilot operated base valves, main body only, with epoxy coated ductile iron bodies and stainless-steel plugs. Maximum working pressure IDROMEMBRANA 16.0 & HYDROMODUL 25.0 Bar Maximum operating temperature IDROMEMBRANA 50.0°C and HYDROMODUL 80.0°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300 Flanged

Marking:

Technidro, DN, PN and model name on adhesive label on body. Flow arrow on body

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

IDROMEMBRANA HYDROMODUL

Manufacturer:

Techidro S.R.L

Company Name

Techidro S.R.L

Address

VIA G GASTALDI 26F 16165 GENOVA ITALY

View All Listings by this Company

AQUAPRO range of angled valves with chromium plated brass bodies, incorporating a non-rising spindle headwork or a quarter turn ceramic disc headwork with either cubic, single lever or dome type operating members. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

AQUAPRO on body.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Non-rising spindle head with dome type operating members: AP5253R: ½” BSP (M) x ½” BSP (M), AP5253R: ½” BSP (M) x ⅜” BSP (M), ¼ turn ceramic disc headwork with single lever operating member: AP5253L: ½” BSP (M) x ½” BSP (M), AP5253L: ½” BSP (M) x ⅜” BSP (M). ¼ turn ceramic disc headwork with cubic operating member: AP5253S: ½” BSP (M) x ½” BSP (M), AP5253S: ½” BSP (M) x ⅜” BSP (M), AP5253O: ½” BSP (M) x ½” BSP (M), AP5253O: ½” BSP (M) x ⅜” BSP (M).

Product Images

Approval Holder:

Ultimate Trading Co(L.L.C.)

Company Name

Ultimate Trading Co(L.L.C.)

Address

No 2 Street 13D Nakheei Road, Deira Dubai

Country

U.A.E

View All Listings by this Company

Range of threaded copper pipe elbow tap unions. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

250688003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Water works on adhesive label.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

100733 - 14mm x 1/2" BSP captive nut 100775 - 14mm x 1/2" BSP captive nut 100734 - 18mm x 3/4" BSP captive nut 100776 - 18mm x 3/4" BSP captive nut

Approval Holder:

Waterworks Ltd

Company Name

Waterworks Ltd

Address

60 Backus Ave. Danbury

Postcode

CT06810

Country

United States

Phone

2035466207

General Email

mary.kimlinger@waterworks.com

View All Listings by this Company

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241002724

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

CWMA3 & CWMA5 : 1” BSP (F) inlet x 1” BSP (F) outlet. CWMA7 : 1¼” BSP (F) inlet x 1” BSP (F) outlet. CWMA9 : 1½” BSP (F) inlet x 1¼” BSP (F) outlet. CWMA18 : 2” BSP (F) inlet x 1½” BSP (F) outlet.

Marking:

Winflo logo, model code and product technical information on data-plate.

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

CMWA range model code: CMWAXX-Y(T) CMWA = Pump type. XX = Nominal flow rate m/3 per hour (3, 5, 7, 9 or 18). Y = Number of impellers. T = 3 phase or (blank) = single phase. CMWA3-2, CMWA3-3, CMWA3-4, CMWA3-5, CMWA3-6 & CMWA3-7. CMWA5-2, CMWA5-3, CMWA5-4, CMWA5-5, CMWA5-6 & CMWA5-7. CMWA7-2, CMWA7-3, CMWA7-4, CMWA7-5 & CMWA7-6. CMWA9-2, CMWA9-3, CMWA9-4 & CMWA9-5. CMWA3-2T, CMWA3-3T, CMWA3-4T, CMWA3-5T, CMWA3-6T & CMWA3-7T. CMWA5-2T, CMWA5-3T, CMWA5-4T, CMWA5-5T, CMWA5-6T & CMWA5-7T. CMWA7-2T, CMWA7-3T, CMWA7-4T, CMWA7-5T, CMWA7-6T & CMWA7-7T. CMWA9-2T, CMWA9-3T, CMWA9-4T & CMWA9-5T. CMWA18-2T, CMWA18-3T & CMWA18-4T.

Approval Holder:

Eautechnik GmbH

Company Name

Eautechnik GmbH

Country

Germany

View All Listings by this Company

Range of shower booster pumps (either single or double) with acetal bodies and impellers and EPDM seals and NBR `O` rings. Supplied with stainless-steel braided EPDM lined flexible hoses incorporating isolation valves Maximum operating pressure 3.8 bar. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250304731

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm pushfit

Marking:

Bristan and product info on label

Installation Requirements:

R001 R415

Expiry date:

31/03/2030

Model:

Maximum working pressure 3.8 bar: ST PUMP15TN / 232650 ST PUMP20TN / 232653 ST PUMP20SG / 232651

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of shower handsets with plastic bodies and various finishes. Maximum operating temperature 60 °C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250612005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Keekoe on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

H01011, H01023, H02013, H03013, H03021, H04011, H04023, H05014, H05015, H06013, H09015, H11013, H12013, H17015, H20013, H21011, H27015, H28013, H29033, H30043, H31015, H33013, H34013, H34021, H35013, H36011, H34021, H34021, H43014, H46014, H39033, H37013, H39031, H39013, H39043, H49014, H48013, H48021, H46023, H55013, H56013, H41013 & H42013.

Approval Holder:

Xiamen Keekoe Sanitary Ware Co. Ltd.

Company Name

Xiamen Keekoe Sanitary Ware Co. Ltd.

Address

No.275-279 Huanzhu Road North Jimei Industrial Zone Xiamen

Country

China

View All Listings by this Company

Range of overhead shower outlets with stainless steel bodies (various finishes). The inlet incorporates a stainless-steel filter and a plastic flow regulator. Maximum working temperature 45°C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250608015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

Dolphin Solutions Ltd logo on the body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

DB3001.a.bbb Dolphin blue round shower head DB3002.a.bbb Dolphin blue square shower head Where: The suffix .a in the above codes will be a number 1 - 9 to denote the finish: .1 to denote brushed/satin polished. .2 to denote mirror polished. .3 to denote brushed/satin polished with PVD coating. .4 to denote mirror polished with PVD coating. .5 to denote powder coated. .6 - 9 to denote other material and finish options. The suffix .bbb in the above code indicates the colour of the PVD or powder coat. It can be either two or three digits from 01-999.

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

General Email

Ralph.Mumford@dolphinsolutions.com

View All Listings by this Company