Tecnogomma International SpA Approvals


#1909544

‘Timo 3-60 ‘O’ rings and gaskets’. Black coloured, injection moulded EPDM ‘O’ rings and gaskets. Shore hardness 60. Tested in-radius size between 0.50mm & 2.67mm. For use with water up to 85°C.

Section:
5360 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:
1909544
Expiry date:
30/09/2024
Model:
Manufacturer:
Tecnogomma International SpA
Company Name
Tecnogomma International SpA
Address
Via Castello 46, 24060 Adrara, San Martino
Phone
0039 035 933 839

View All Listings by this Company

Print This Approval


#1909557

'TIMO 3-70 'O' rings and gaskets'. Black coloured, injection moulded EPDM 'O' rings and gaskets. Shore hardness 70. Tested in-radius size between 0.50mm & 2.67mm. For use with water up to 85°C.

Section:
5360 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:
1909557
Expiry date:
30/09/2024
Model:
Manufacturer:
Tecnogomma International SpA
Company Name
Tecnogomma International SpA
Address
Via Castello 46, 24060 Adrara, San Martino
Phone
0039 035 933 839

View All Listings by this Company

Print This Approval


#2004525

'TIMO 5-70 Gaskets & ‘O’ rings'. Black coloured, injection moulded EPDM gaskets & ‘O’ rings. Shore hardness 70. Tested in-radius size between 0.50mm & 2.66mm. For use with water up to 85°C.

Section:
5360 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:
2004525
Expiry date:
30/04/2025
Model:
Manufacturer:
Tecnogomma International SpA
Company Name
Tecnogomma International SpA
Address
Via Castello 46, 24060 Adrara, San Martino
Phone
0039 035 933 839

View All Listings by this Company

Print This Approval


#2012531

'TIMO-70'. Black coloured, injection moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 1.17mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2012531
Expiry date:
31/12/2025
Manufacturer:
Tecnogomma International SpA
Company Name
Tecnogomma International SpA
Address
Via Castello 46, 24060 Adrara, San Martino
Phone
0039 035 933 839

View All Listings by this Company

Print This Approval


#2010565

'WRC-70 'O' rings and gaskets'. Black coloured, injection moulded NBR rubber 'O' rings and gaskets. Tested in-radius size between 0.5mm & 2.6mm. Shore hardness 70. For use with water up to 23°C.

Section:
5390 Rubbers
Section Subtitle:
Nitrile (Acrylonitrile Butadiene) - components.
WRAS Approval Number:
2010565
Expiry date:
31/10/2025
Manufacturer:
Tecnogomma International SpA
Company Name
Tecnogomma International SpA
Address
Via Castello 46, 24060 Adrara, San Martino
Phone
0039 035 933 839

View All Listings by this Company

Print This Approval


#2109555

'TEC S147 R.-45 ROSSO'. Orange coloured, injection moulded, silicone rubber 'O' rings & gaskets. Shore hardness 45. Tested in-radius size between 0.5mm & 2.6mm. For use with water up to 85°C.

Section:
5410 Rubbers
Section Subtitle:
Silicone - components.
WRAS Approval Number:
2109555
Expiry date:
30/09/2026
Manufacturer:
Tecnogomma International SpA
Company Name
Tecnogomma International SpA
Address
Via Castello 46, 24060 Adrara, San Martino
Phone
0039 035 933 839

View All Listings by this Company

Print This Approval


#2203524

'TEC N41-70 'O' rings and gaskets'. Black coloured, injection moulded NBR 'O' rings and gaskets. Shore hardness 70. Tested in-radii sizes between 0.5mm & 2.6mm. For use with water up to 23°C.

Section:
5390 Rubbers
Section Subtitle:
Nitrile (Acrylonitrile Butadiene) - components.
WRAS Approval Number:
2203524
Expiry date:
31/03/2027
Manufacturer:
Tecnogomma International SpA
Company Name
Tecnogomma International SpA
Address
Via Castello 46, 24060 Adrara, San Martino
Phone
0039 035 933 839

View All Listings by this Company

Print This Approval


#2205535

'TIMO 7 NC-70'. Black coloured, injection moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2205535
Expiry date:
31/05/2027
Manufacturer:
Tecnogomma International SpA
Company Name
Tecnogomma International SpA
Address
Via Castello 46, 24060 Adrara, San Martino
Phone
0039 035 933 839

View All Listings by this Company

Print This Approval


#2205536

'TIMO 7 NC-70 'O'-rings and washers'. Black coloured, injection moulded EPDM 'O'-rings and washers. Shore hardness 70. Tested in-radius size between 0.5mm & 2.6mm. For use with water up to 85°C.

Section:
5360 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:
2205536
Expiry date:
31/05/2027
Manufacturer:
Tecnogomma International SpA
Company Name
Tecnogomma International SpA
Address
Via Castello 46, 24060 Adrara, San Martino
Phone
0039 035 933 839

View All Listings by this Company

Print This Approval


#2208545

'TIMO 3-70'. Black coloured, injection moulded EPDM material. Shore hardness 70. Tested in-radius size 1.2mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2208545
Expiry date:
31/08/2027
Manufacturer:
Tecnogomma International SpA
Company Name
Tecnogomma International SpA
Address
Via Castello 46, 24060 Adrara, San Martino
Phone
0039 035 933 839

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.