Drain off cock with a DZR brass body, non-rising spindle headwork and EPDM seals and washers. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of pillar taps with brass bodies (chromium plated) incorporating either a quarter turn ceramic disc headworks with single lever operating members (TAP9013 model) or non-rising spindle headwork with dome type operating members (TAP1118 model). The spout outlets incorporate a plastic flow straingtener. The products are supplied with metal backnuts. Maximum working pressure 5.5 bar. Maximum operating temperature 70°C.
Range of Pillar taps (chrome plated brass) bodies incorporating non-rising spindle headworks with cross top operating members. The spout outlets incorporate plastic flow straighteners. The products are supplied with metal backnuts. Maximum working pressure 7.0 bar. Maximum operating temperature 65°C.
Range of pillar taps (chrome plated brass bodies), incorporating non-rising spindle headworks with dome type operating members. The spout outlets incorporate plastic flow straighteners. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of Single Layer PPRCT Solid Pipes (SDR7.4) comprising of green coloured PPRCT material. Not approved for use with any fittings. Maximum working pressure 23.4 bar. Cold water above ground use only.
Range of shower hoses with PVC outer (various finishes) and TPE liner. Maximum operating temperature 65.0°C. Open outlet use only.
Range of stainless steel or polymeric braided, PERT and LDPE lined flexible hose assemblies with EPDM O-rings. Available with a variety of end connections for each size and model. Compression connection to be used with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of flexible hoses assemblies incorporating a braided outer with TPSiV liner and various brass end connections. Maximum operating temperature 85°C. Open outlet use only.
Range of stainless steel or nylon braided, PEX lined flexible hose assemblies with various brass end connections. Maximum working pressure 10.0 Bar. Maximum operating temperature 85 °C.
Stainless steel braided hose incorporating an EPDM liner and NBR ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections. Maximum working pressure: 6.0 bar @ 65°C Maximum working pressure: 12.0 bar @ 20°C
Range of ‘Ridgeline’ stainless steel flexible connectors. Maximum working pressure 6.0 bar. Maximum operating temperature 80°C.
temperature and pressure relief valve set at 7.0 bar@90˚C. A safety kit (manifold) consisting of a check valve cartridge (verified by test, suitable for backflow protection against Fluid category 2) strainer, an expansion relief valve set at 6.0 bar and pressure reducing valve set at 3.0 bar. A tundish, expansion vessel and a filling loop assembly, incorporating a stainless steel braided EPDM lined flexible hose, brass bodied isolation valve and a DZR brass non-verifiable double check valve assembly that incorporates an isolation valve. Maximum working pressures: Secondary circuit 5.5 bar. Primary circuit 3.0 bar Maximum operating temperature 90.0°C
Range of vertical cased and insulated direct and indirect unvented stainless steel hot water storage cylinders. Fitted with a Caleffi 309463 GLD temperature and pressure relief valve sat at 6 bar & 90°C, and supplied with an inlet control group consisting of in-line pressure reducing valve (Caleffi set at 3 bar) and pressure relief valve (Caleffi CWIC200055) set at 4.5 bar, and incorporates a stainless-steel mesh and an approved check valve cartridge (verified by test suitable for backflow protection against Fluid Category 2), expansion vessel and filling loop. Maximum working pressure 4.4 bar. Maximum operating temperature 99°C.
Range of wall mounted, or concealed manually operated blending valves, (brass bodies – various finishes), incorporating a ceramic cartridge headwork controlling both the flow and temperature with a single lever operating member. Maximum working pressure 5 bar. Maximum operating temperature 85°C.
Range of thermostatic mixing valves with DZR brass bodies. The inlets incorporate a stainless-steel strainer and single check valve cartridge verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10 Bar Maximum operating temperature 85°C
Range of wall mounted, exposed or concealed thermostatic shower valves (chrome plated brass) bodies incorporating a quarter turn ceramic disc headworks with various operating members. Temperature is controlled independently via a thermostatic cartridge also using various operating members incorporating a manual override button. The products incorporate approved check valve cartridges; however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C
Range of wall mounted, concealed, thermostatic shower valves with (brass bodies – various trim set finishes. Incorporating a quarter turn ceramic disc headwork which controls the flow using dome type operating member. Temperature is controlled independently via a thermostatic cartridge also using a dome type operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C
Range of wall mounted thermostatic shower valves, (brass bodies - various finishes) incorporating a two-way manual diverter headwork controlling the flow to either an overhead shower or shower handset. The temperature is controlled via a thermostatic cartridge incorporating a manual override button. The inlets on the shower valve and shower handset incorporate approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, concealed, thermostatic shower valves with (brass bodies - chrome plated trim sets). Flow is either controlled by a ceramic disc headwork or 3-way manual diverter. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member and a manual override button. The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provide backflow protection. Maximum working pressure; 10Bar Maximum operating temperature; 60°C.
Range of thermostatic bar shower mixers, (brass bodies – various finishes) incorporating ceramic disc diverter valves with dome type operating members. The temperature is controlled independently via a thermostatic with a dome type operating member that incorporates a manual override button. The inlets incorporate approved single check valve cartridges, however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection. The products are supplied with a shower hose, handset, overhead shower and riser rail assembly. Maximum working pressure 5.0 bar Maximum operating temperature 60°C.
Range of wall mounted thermostatic bar shower mixers (brass bodies – various finishes) incorporating either a quarter turn ceramic disc headwork or two-way ceramic disc diverter with a dome or cubed type operating member. The temperature is controlled independently via a thermostatic cartridge with dome or cubed type operating members that incorporate a manual override button. The inlets incorporate approved single check valve cartridges, however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection. Models ( ET 106, HT 106 & CV 106) are supplied with shower hose, handset, overhead shower and riser rail assembly. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.
Range of lever operated butterfly valves incorporating fusion bonded Epoxy coated ductile iron bodies, with stainless steel discs and end faces and EPDM seat. For use with Stainless steel pipe manufactured to EN 10217-7 (or Equivalent). For above and Below ground. Maximum working pressure 16.0 bar Maximum operating temperature 85°C
Wall mounted, concealed, 2-way diverter valve (brass bodies – various finishes) with a dome type operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted concealed two way and three way diverter valve assembly (brass bodies with trim sets in various finishes). The 59556 000070 and 59548 000170 concealed installation units are not approved in their own right. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of control valves with plastic bodies, supplied with bypass valves. Maximum working pressure 8.6 bar. Maximum operating temperature 39°C.
1451 series of spring loaded, resilient trim, non-return valves with brass bodies. Maximum working pressure 10.0 bar ½” – 1” and 12.0 bar 1 ¼ - 2”. Maximum operating temperature 85°C.
Range of in-line, manually adjustable pressure reducing valves with DZR brass bodies. Some models are available with a pressure gauge. Maximum working pressure: 16bar – outlet pressure range: 1.0 - 6.0 bar. Maximum working temperature: 80°C
Manually adjustable pressure reducing valves with nickel plated, DZR brass bodies for use with copper pipe (manufactured to EN1057). Maximum supply pressure 16.0 bar. Outlet pressure range between 1.0 & 6.0 bar. Factory pre-set at 3 bar. Maximum operating temperature 85°C.
Range of bronze swing gate valves with bronze bodies and discs (with a metal-to-metal seal). Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.
Range of spherical ball valves having brass, DZR brass or stainless-steel bodies and lever type operating members. For use with stainless steel pipe (EN10312) or copper pipe (EN1057). Maximum working pressure 25.0 Bar. Maximum operating temperature 85.0°C.
Range of ball valves with DZR brass bodies and a stainless-steel ball. The valves are available with lock shield, butterfly or single lever operating members. The threaded end connections have hexagonal spanner flats. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of spherical valves (brushed chrome brass bodies) with single lever or T handles operating members. Maximum working pressure; DN 8, DN 10, DN 15 – 50.0 bar. DN 20, DN 25 – 40.0 bar. DN 32, DN 40 – 30.0 bar. DN 50 – 25.0 bar Maximum operating temperature; 90°c
Range of spherical valves with DZR brass bodies, chrome plated brass balls and PTFE seats. The products incorporate a lever type operating members. Maximum working pressure 40.0 bar. Maximum operating temperature 100°C.
Range of spherical valves with (bronze or brass bodies) incorporating a brass or stainless-steel ball with PTFE seat. The 229f range - Maximum operating pressure - 40 bar. Maximum operating temperature 85°C. The 202 range - Maximum operating pressure - 25 bar. Maximum operating temperature - 85°C.
Range of spherical valves with brass bodies, models (127 & 127R) chrome plated brass bodies incorporating chrome plated brass balls and single lever operating members. The products incorporate spigot spout outlets. Models (267, 127, 247, 227 and 248) spout outlets incorporate a plastic flow straightener Maximum working pressure 16.0 Bar. Maximum operating temperature 100.0°C.
Range of in-line angled or ‘T’ type spherical valves with chromium plated brass, nickel plated brass or brass bodies with chromium plated brass balls. Models incorporate lever or butterfly operating members. Maximum working pressure 10.0 Bar, 16 bar, 25 bar, 32 bar, 40 bar or 64 bar. Maximum operating temperature 100 °C.
Range of in-line spherical valves with brass body, brass ball, EPDM O-ring and PTFE gasket. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with brass or DZR brass bodies, chromium plated brass or chromium plated DZR brass (12-18mm) or stainless-steel balls (22-54mm) and various operating members The press-fit connection is for use with copper pipes (manufactured to EN 1057), stainless steel pipes (manufactured to EN10312) or carbon steel pipes (manufactured to EN10305-3). Jointing is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of inline, angled or tee type spherical valves with brass (CP5R models), nickel plated brass (CP12 and CP02 models) or chromium plated brass (CP13 models) bodies, brass (10.20105.22X.CP5R-8510 and 10.20105.28X.CP5R-8510 models) or chromium plated brass (all other models) balls. The valves are either screwdriver, lever or butterfly handle operated (see model). The compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 25.0 bar (10.60145.015.CP12-8510 and 10.61055.022.CP12-8510 models) or 16.0 bar (all other models). Maximum operating temperature 85°C.
Range of screwdriver operated spherical valves incorporating brass bodies and chrome plated brass ball. The compression and press-fit connections are for use with copper pipe (manufactured to EN1057). Jointing of the press-fit connection is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of in-line hex key operated spherical valves incorporating nickel plated or chromium plated brass bodies and chromium plated brass balls. The compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with stainless steel bodies, stainless steel ball and lever operating members. The press-fit connection is for use with stainless steel pipe (manufactured to EN10312). Jointing is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of brass bodied gate valve with PTFE gaskets with hand wheel operated mechanism. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.
Range of gate valves with brass bodies and wedges. The valves are operated via a non-rising spindle with a hand wheel operating member. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.
Screw down stop valves with brass bodies and dome type operating members. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Flomasta Range of plastic, push-fit stop valves for use with MDPE pipe (manufactured to BS EN 12201). Maximum working pressure 16.0 bar. Cold water use only.
Water filter and scale inhibitor comprising of a plastic filter head and plastic filter cartridge with an activated carbon block and sodium polyphosphate. The push-fit connections are for use with LDPE pipe (manufactured to DIN 8072). Maximum working pressure 5.52 bar. Cold water use only.
'ABS 727-Grey (grey coloured), ABS 727-Dark Grey (dark grey coloured), ABS 727 GR48 (grey coloured), ABS 727 White (white coloured), & ABS 727 Black (black coloured)'. Injection moulded ABS materials. For use with water up to 85°C.
Page 138 of 158
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
