Kingfisher International Products Ltd. Approvals


#1903372

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic aerator and the product is supplied with shower hose and handset. The product is supplied with metal backnuts. Maximum working pressure 10 bar. Maximum operating temperature 60°C

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
1903372
Expiry date:
31/03/2024
Size:
¾” BSP (M)
Marking:
KINGFISHER "GOOD HOME LOGO" ON REAR OF TAP BODY
Installation Requirements:
R001 R006 R020
Model:
3663602665632
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1904075

Wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating non-rising spindle headworks with dome type operating members and a lockable diverter to the shower outlet. The spout outlet incorporates a plastic aerator and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0525 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, lockable diverter to shower outlet.
WRAS Approval Number:
1904075
Expiry date:
30/04/2024
Note:
Not supplied with shower hose and handset.
Size:
¾” x ½” BSP (M) offset unions
Marking:
COOKE & LEWIS ON REAR OF TAP BODY
Installation Requirements:
R001 R010 R040
Model:
3663602665007 E3
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1905397

Range of wall mounted two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headworks with single lever operating members and self-cancelling diverter to shower outlet. The spout outlets incorporate a plastic flow straightener and the products are supplied with a pop-up waste. Both inlets incorporate a stainless-steel strainer and a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides adequate backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
1905397
Expiry date:
31/05/2024
Note:
No testing on pop-up waste.
Size:
¾” x ½” BSP(M) off set union
Marking:
KINGFISHER GOOD HOME LOGO ON REAR OF TAP BODY
Installation Requirements:
R001 R030
Model:
3663602665021, 3663602665014 & 3663602665038
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1905395

Range of wall mounted two-hole, single outlet (fixed), thermostatically controlled combination tap assemblies (chrome plated brass). Flow is controlled and diverted, between the spout outlet and shower outlet, by a manual diverter. The diverter of model 3663602665083 diverter is operated by turning the spout through 90 degrees. Temperature is controlled independently via a thermostatic cartridge. The spout outlets incorporate a plastic aerator. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1905395
Expiry date:
31/05/2024
Size:
¾” to ½” BSP (M) union.
Marking:
KINGFISHER GOOD HOME LOGO ON REAR OF BODY
Installation Requirements:
R001 R020
Model:
3663602665076 & 3663602665083
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1905396

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating members and manually operated diverter to shower outlet. Inlets incorporate approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate it provides adequate backflow protection). The spout outlet incorporates a plastic aerator. Maximum working pressure 5 bar. Maximum operating temperature 60°C

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
1905396
Expiry date:
31/05/2024
Note:
Shower hose and handset is not supplied as part of this approval
Size:
¾” x ½” BSP(M) offset union.
Marking:
KINGFISHER GOOD HOME LOGO ON REAR OF BODY
Installation Requirements:
R001 R020 R040
Model:
3663602664994 & 3663602664987
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1906397

Wall mounted, exposed, bar type thermostatic shower mixing valve (chromium plated brass), incorporating a quarter turn ceramic disc headwork with dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1906397
Expiry date:
30/06/2024
Note:
This approval does not include a shower hose and handset
Size:
¾” x ½” offset unions
Marking:
Gaoao logo (‘GAOAO’) on rear of body of model 3663602665922 Kingfisher Good Home Logo on rear of tap body of model 3663602665939
Installation Requirements:
R001 R010 R040
Model:
3663602665939 & 3663602665922
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company
Manufacturer:
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Company Name
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province

View All Listings by this Company

Print This Approval


#1906396

Wall mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a quarter turn ceramic disc headwork with a dome type operating members and manually operated diverter to shower outlet. The temperature is controlled independently via a thermostatic cartridge and dome type operating member. The spout outlet incorporates a plastic aerator. Each inlet incorporates a stainless steel strainer and an approved single check valve cartridge, however, the complete unit has not been tested to demonstrate back flow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
1906396
Expiry date:
30/06/2024
Note:
This approval does not include a shower hose and handset
Size:
¾” x ½” offset unions
Marking:
Gaoao on rear of body
Installation Requirements:
R001 R010 R040
Model:
3663602665069
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company
Manufacturer:
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Company Name
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province

View All Listings by this Company

Print This Approval


#1910355

Wall mounted thermostatic blending valves incorporating a 2 way ceramic disc headwork with a dome type operating member controlling and diverting the flow between the spout outlet or the shower outlet. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
1910355
Expiry date:
31/10/2024
Size:
¾” x ½” BSP (M) offset union
Marking:
KINGFISHER GOOD HOME LOGO ON REAR OF TAP BODY
Installation Requirements:
R001 R010 R040
Model:
3663602663140
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1909399

Range of wall mounted, exposed, thermostatic blending shower valves incorporating a ½ turn ceramic disc headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The 3663602665946 model has cube type operating members, the 3663602664956 model has dome type operating members. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1909399
Expiry date:
30/09/2024
Note:
This approval does not include a shower hose and handset.
Size:
¾” x ½” BSP (M) offset union
Marking:
KINGFISHER GOOD HOME LOGO ON REAR OF TAP BODY
Installation Requirements:
R001 R010 R040
Model:
3663602665946 & 3663602664956
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1911033

Dual flush WC outlet valve incorporating a plastic body and silicon seal. The valve is operated by a cable linked push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
1911033
Expiry date:
30/11/2024
Size:
1½” BSP (M)
Marking:
Flomasta (brand of the Kingfisher Group) on top cap.
Installation Requirements:
R001 R571
Model:
F-F-1056-1 - 1½" Dual Flush Valve
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1909407

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-out spray type which incorporates a black nylon braided PEX lined flexible hose, and a manually operated button to divert between a plastic aerator and the spray function. The inlet hoses are supplied with a washer incorporating a stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1909407
Expiry date:
30/09/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Cooke & Lewis on tap body
Installation Requirements:
R001 R009 R090
Model:
3663602792116 combination tap assembly
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1904370

Range of single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork and single lever operating members. The product has a pull-out spray outlet which incorporates a plastic aerator and a self-closing trigger mechanism. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1904370
Expiry date:
30/04/2024
Size:
Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
Marking:
Gaoao on body
Installation Requirements:
R001 R006 R009 R010
Model:
3663602799849 COMBINATION TAP ASSEMBLIES – PULL OUT SPRAY
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company
Manufacturer:
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Company Name
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province

View All Listings by this Company

Print This Approval


#1906398

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and pull down spray. The inlet hoses incorporate a combined washer and stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906398
Expiry date:
30/06/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 1/2” captive nut end connections
Marking:
Cooke & Lewis on tap body
Installation Requirements:
R001 R006 R009 R010
Model:
3663602792123 COMBINATION TAP ASSEMBLIES
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1909119

Range of quarter turn ceramic disc headworks with brass bodies, NBR ‘O’-rings and plastic washers. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
WRAS Approval Number:
1909119
Expiry date:
30/09/2024
Size:
½” BSP (M)
Marking:
PLUMBSURE, WRAS & DATE OF MANUFACTURE DD/MM/YY ON BODY
Installation Requirements:
R001
Model:
5052931415496-C, 5052931415496-H, 5052931415526-C & 5052931415526-H 1/4 TURN CERAMIC DISC HEADWORKS
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1909120

Range of quarter turn ceramic disc headworks with brass bodies, NBR ‘O’-rings and plastic washers. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
WRAS Approval Number:
1909120
Expiry date:
30/09/2024
Size:
½” BSP (M)
Marking:
FLOMASTA, WRAS & DATE OF MANUFACTURE DD/MM/YY ON BODY
Installation Requirements:
R001
Model:
2611F-C, 2611F-H, 1908F-C, 1908F-H, 2961F-C & 2961F-H 1/4 TURN CERAMIC DISC HEADWORKS
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2001132

Range of non-rising spindle headworks with brass bodies and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
WRAS Approval Number:
2001132
Expiry date:
31/01/2025
Size:
½” BSP (M)
Marking:
FLOMASTA, WRAS and date of manufacture (DD/MM/YY) on body.
Installation Requirements:
R001
Model:
3279F & 7960F non-rising spindle headworks
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2001133

Range of non-rising spindle headworks with brass bodies and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
WRAS Approval Number:
2001133
Expiry date:
31/01/2025
Size:
½” BSP (M)
Marking:
PLUMBSURE, WRAS and date of manufacture (DD/MM/YY) on body.
Installation Requirements:
R001
Model:
5052931415502 & 5052931415533 non-rising spindle headworks
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2006076

Range of single hole, single outlet (swivel) combination tap assemblies incorporating a brass body (chrome, nickel or black finish) and ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006076
Expiry date:
30/06/2025
Marking:
COOKE & LEWIS (BRAND OF KINGFISHER) & DATE OF MANUFACTURE MM/YYYY ON OPERATING MEMBER
Installation Requirements:
R001 R006 R009 R010
Model:
3663602482123 ARUVI SINGLE LEVER KITCHEN TAP, 3663602482208 GULLFOSS FOLDING KITCHEN MIXER TAP CHROME, 3663602482161 ARYA SINGLE LEVER KITCHEN TAP CHROME, 3663602482178 ARYA SINGLE LEVER KITCHEN TAP B.NICKEL 3663602482130 FARIN SPRING NECK KITCHEN TAP CHROME, 3663602482154 FARIN SPRING NECK KITCHEN TAP CHROME BK 3663602482147 FARIN SPRING NECK KITCHEN TAP B NICKEL
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2006079

Range of copper end feed fittings for use with copper tube. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:
1210 Fittings for use with Tube and Pipe
Section Subtitle:
End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2006079
Expiry date:
30/06/2025
Size:
6mm – 54mm.
Marking:
FLOMASTA (BRAND OF KINGFISHER) & size on body.
Installation Requirements:
R001
Model:
5001, 5002, 5040, 5041, 5090, 5092, 5085, 5086, 5270, 5301, 5240, 5243, 5130, 5130R, 5060, 5062, 5063, 5064, 5065 & 5270S, L5090.
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2006078

Range of copper solder ring fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1115 Fittings for use with Tube and Pipe
Section Subtitle:
Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2006078
Expiry date:
30/06/2025
Size:
8mm – 54mm 3/8” – 2”
Marking:
FLOMASTA (BRAND OF KINGFISHER) & SIZE ON BODY
Installation Requirements:
R001
Model:
SR5270, SR5090, SR5092, SR5301,SR5240, SR5243, SR5040, SR5041, SR5130, SR5130R, SR5062, SR5063, SR5271, SR5085, SR5086, SR5270S. All fittings are for use with copper pipe to EN 1057.
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1910359

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass or brushed gold PVD). Incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a rubber flow straightener. Maximum working pressure 5 bar. Maximum operating temperature 70°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910359
Expiry date:
31/10/2024
Size:
Nylon braided PEX lined hose assembly incorporating ½” captive nut end connections.
Marking:
Kingfisher good home logo and date of manufacture mm/yyyy on body
Installation Requirements:
R001 R006 R009 R010
Model:
3663602481829 Filbert Side Lever (Chrome) & 3663602481843 Filbert Side Lever (Brass) COMBINATION TAP ASSEMBLIES
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1910360

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass or brushed gold PVD). Incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a rubber flow straightener. Maximum working pressure 10 bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910360
Expiry date:
31/10/2024
Size:
Nylon braided PEX lined hose assembly incorporating ½” captive nut end connections.
Marking:
Kingfisher good home logo & date of manufacture mm/yyyy on body
Installation Requirements:
R001 R006 R009 R010
Model:
3663602481867 Filbert Twin Lever (Chrome) & 3663602481850 Filbert Twin Lever (Brass) COMBINATION TAP ASSEMBLIES
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1911358

Single hole, single outet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-down spray type incorporating a plastic flow regulator, a plastic flow straightener and a push button spray. The connection to the pull-down hose incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1911358
Expiry date:
30/11/2024
Size:
Grey polymeric (PET - Polyethylene terephthalate) braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Kingfisher good home logo & date of manufacture mm/yyyy on body.
Installation Requirements:
R001 R090
Model:
3663602481874 Gevuina (Black Chrome) COMBINATION TAP ASSEMBLY
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2007079

‘EPH_WSP19’ Range of brass bodied fittings for use with copper pipe, some fittings are to be soldered with copper pipe (see models). Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2007079
Expiry date:
31/07/2025
Size:
See model
Marking:
Size and Flomasta on body
Installation Requirements:
R001
Model:
End Feed Fittings (Soldered): EPH_WSP19_0593 - End Feed Air Vent Cap 15mm EPH_WSP19_0608 - End Feed Wall Plate Elbow 15mm * ½” BSP (M) EPH_WSP19_0618 - End Feed Male Coupler 15mm * ½” BSP (M) EPH_WSP19_0619 - End Feed Male Coupler 15mm * ¾” BSP (M) EPH_WSP19_0625 - End Feed Male Coupler 22mm * ¾” BSP (M) EPH_WSP19_0635 - End Feed Female Coupler 15mm * ½” BSP (F) EPH_WSP19_0642 - End Feed Female Coupler 22mm * ¾” BSP (F) EPH_WSP19_0663 - End Feed Female Elbow 15mm * ½” BSP (F) EPH_WSP19_0676 - End Feed Male Elbow 15mm * ½” BSP (M) Threaded Brass fittings: Threaded Brass Blanking Nut: EPH_WSP19_0719A - ¼” BSP (F) EPH_WSP19_0720 - ⅜” BSP (F) EPH_WSP19_0721 - ½” BSP (F) - CHROME EPH_WSP19_0721A - ½” BSP (F) EPH_WSP19_0722A - ¾” BSP (F) EPH_WSP19_0723 - 1" BSP (F) Threaded Brass Male Flanged Plug: EPH_WSP19_0726 - ½” BSP (F) EPH_WSP19_0727 - ¾” BSP (F) EPH_WSP19_0724 - ¼” BSP (F) EPH_WSP19_0728 - 1" BSP (F) Threaded Brass Reducing Bush: EPH_WSP19_0747A - M-F ½” BSP (M) * ⅜" BSP (F) EPH_WSP19_0749A - M-F ¾” BSP (M) * ½” BSP (F) EPH_WSP19_0746 - M-F ½” BSP (M) * ¼” BSP (F) EPH_WSP19_0750A - M-F 1” BSP (M) * ¾” BSP (F) EPH_WSP19_0751 - M-F 1” BSP (M) * ½” BSP (F) Threaded Brass Hexagon Nipple: EPH_WSP19_0763A - M-M ½” BSP (M) * ½” BSP (M) EPH_WSP19_0764B - M-M ¾” BSP (M) * ¾” BSP (M) EPH_WSP19_0761 - M-M ¼” BSP (M) * ¼” BSP (M) EPH_WSP19_0765A - M-M 1” BSP (M) * 1” BSP (M) Threaded Brass Flanged Backnut: EPH_WSP19_0801 - ½” BSP (F) EPH_WSP19_0802A - ¾” BSP (F) Threaded Brass Female Socket: EPH_WSP19_0843 - ½” BSP (F) EPH_WSP19_0844 - ¾” BSP (F) EPH_WSP19_0841 - ¼” BSP (F) EPH_WSP19_0845 - 1” BSP (F) Threaded Brass Hexagon Nipple: EPH_WSP19_2476 - M-M ⅜” BSP (M) * ⅜” BSP (M) Tap extender: EPH_WSP19_2605 - ½” BSP (F) x ¾” BSP (M) EPH_WSP19_2609 - ¾” BSP (F) * ¾” BSP (M) Multi thread Nipple: EPH_WSP19_2599 - ¾” BSP (M) * ½” BSP (F) * 5/8” BSP (F) with rubber washer
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2001134

A range of wall mounted two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a 2-way ceramic disc diverter headwork diverting between the spout outlet and a shower outlet. The temperature is controlled independently via a thermostatic cartridge with a manual override button. The spout outlet incorporates a plastic aerator. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2001134
Expiry date:
31/01/2025
Note:
This approval does not include a shower hose or handset
Size:
¾” x ½” offset unions.
Marking:
Kingfisher good home logo on body.
Installation Requirements:
R001 R010 R040
Model:
3663602300304, 3663602320289, 3663602320340 & 366302300847 COMBINATION TAP ASSEMBLIES
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2001135

Range of wall mounted, exposed bar type thermostatic shower blending valves (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member which controls both temperature and flow. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2000 Valves
Section Subtitle:
Blending, manually operated.
WRAS Approval Number:
2001135
Expiry date:
31/01/2025
Size:
¾” X ½” offset union.
Marking:
Kingfisher good home logo on body
Installation Requirements:
R001 R010 R040
Model:
3663602300861 & 3663602301523 MANUAL BLENDING VALVES
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2003084

Range of single-hole, single outlet (swivel) combination tap assembly (gold plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The product has a pull-out spray outlet which incorporates a plastic aerator and trigger mechanism that changes the water pattern for straight flow to spray. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2003084
Expiry date:
31/03/2025
Size:
Grey polymeric braided PEX lined hose assemblies incorporating ½” BSP captive nut end connection and washer incorporating a stainless steel strainer.
Marking:
Kingfisher good home logo on body
Installation Requirements:
R001 R006 R009 R010
Model:
3663602481966 COMBINATION TAP ASSEMBLIES Models added July 2021: 5059340504469 & 5059340504421
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2004066

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes). Incorporating a ceramic cartridge or quarter turn ceramic disc headwork with a single lever or hand wheel operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004066
Expiry date:
30/04/2025
Size:
Grey polymeric PEX lined flexible hose assemblies with 1/2" captive nut end connections.
Marking:
Kingfisher good home logo on body
Installation Requirements:
R001 R006 R010
Model:
3663602481881, 3663602481898, 3663602481928, 3663602481904, 3663602481911, 3663602481942, 3663602481959 & 3663602481973 COMBINATION TAP ASSEMBLIES Model added July 2021: 5059340504506
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2004067

Single hole, single outlet (swivel nozzle) tap (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0410 Combination Tap Assemblies - Bidet
Section Subtitle:
Single Hole - Metal Single Outlet - Swivel.
WRAS Approval Number:
2004067
Expiry date:
30/04/2025
Size:
Stainless steel braided or nylon braided PEX lined hose assemblies with ½” BSP captive nut end connections.
Marking:
Kingfisher good home logo on body.
Installation Requirements:
R001 R006 R009 R010
Model:
3663602300229 COMBINATION TAP ASSEMBLY Model added Dec 2021: 5059340185446
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2001138

Range of wall mounted, exposed bar type thermostatic shower blending valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork with a single lever operating member which controls the flow and an independent thermostatic cartridge controlling the temperature with a single lever operating member. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2001138
Expiry date:
31/01/2025
Note:
This approval does not include a shower hose or handset.
Size:
¾” X ½” offset union.
Marking:
KINGFISHER GOOD HOME LOGO ON rear of body.
Installation Requirements:
R001 R010 R040
Model:
3663602301325, 3663602320128, 3663602320067 & 3663602301769 THERMOSTATIC BLENDING VALVES
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2011363

Range of brass caplillary fittings for use with EN1057 copper tube. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1115 Fittings for use with Tube and Pipe
Section Subtitle:
Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2011363
Expiry date:
30/11/2025
Size:
See model.
Marking:
Flomasta and size on body.
Installation Requirements:
R001
Model:
EPH_WSP19_1646 15mm x G1/2” Elbow. EPH_WSP19_2610 15mm x G1/2” Elbow. EPH_WSP19_2611 15mm x G1/2” Elbow. EPH_WSP19_1642 15mm x R1/2” Straight. EPH_WSP19_1645 15mm x G1/2” Straight. EPH_WSP19_1643 22mm x G3/4” Straight.
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2009547

'Flomasta Qual-PEX Pipe'. Triple layered, extruded pipe consisting of a white coloured PEX inner & outer layer and a grey coloured EVOH middle layer. For use with water up to 85°C.

Section:
5240 Polyethylene
Section Subtitle:
Components. All components listed in this section have been tested for water contact suitability of material only.
WRAS Approval Number:
2009547
Expiry date:
30/09/2025
Model:
Manufacturer:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2001150

Range of single hole, single outlet (swivel) pull down spray combination tap assemblies (chromium plated brass) ceramic cartridge headworks with single lever operating members. The outlet incorporates a plastic aerator and a push button spray. stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001150
Expiry date:
31/01/2025
Size:
Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
Marking:
Watersmith on rear of tap body.
Installation Requirements:
R001 R006 R009 R010
Model:
8745P & 9863P COMBINATION TAP ASSEMBLIES
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2104065

Two-hole, single outlet (fixed) combination tap assembly with a brass body (chromium plated), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet is a waterfall design. The inlets incorporate plastic flow restrictors. The product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2104065
Expiry date:
30/04/2026
Size:
¾” BSP (M)
Marking:
WATERSMITH ON FRONT OF TAP BODY
Installation Requirements:
R001 R006 R160
Model:
9514P COMBINATION TAP ASSEMBLY
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2010412

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010412
Expiry date:
31/10/2025
Size:
Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating either ½” or 3/8” captive nut end connections (see model).
Marking:
Kingfisher Goodhome Logo on body
Installation Requirements:
R001 R006 R010
Model:
3663602300823, with ½” flexible hose, Brushed Inox 3663602299707, with 3/8” flexible hose, Brushed Inox 3663602300106, with ½” flexible hose, Brushed Brass 3663602300809, with 3/8” flexible hose, Brushed Brass 3663602299745, with ½” flexible hose, Brushed Copper 3663602301288, with 3/8” flexible hose, Brushed Copper 3663602300922, with ½” flexible hose, Matt White 3663602299929, with 3/8” flexible hose, Matt White 3663602300625, with ½” flexible hose, Matt Black 3663602299905, with 3/8” flexible hose, Matt Black
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2104339

Range of stainless steel and ACB braided hoses with and EPDM liner and various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC. Hoses with plastic push fittings: maximum working pressure 6.0 bar. Maximum operating temperature 65ºC.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2104339
Expiry date:
30/04/2026
Note:
R008 applies to hoses fitted with white plastic push fittings.
Size:
See model.
Marking:
Kingfisher brand logo, WRAS & date of manufacture (YY) on ferrule
Installation Requirements:
R001 R008
Model:
FLOMASTA: hose bore=DN10, End connections= Compression fitting 10mm, pushfitting 15 (plastic), Compression fitting 15mm, 1/2" Captive Nut, 1/2" Elbow , 3/8 " Captive Nut, Compression fitting 15mm w/valve, 3/4” Captive Nut, M10X1, 1/2" BSP, 3/4" BSP, pushfitting 15, M12X1, Pipe end 15mm, 3/4" Elbow, 1/2” valve, Pushfitting 15 w/valve (plastic) FLOMASTA: hose bore=DN13, End connections= 1/2" Captive Nut, 3/4” Captive Nut, Pipe end 22mm, Pipe end 15mm, 1/2" Elbow, 3/4” Elbow, 1/2" BSP, 3/4" BSP, pushfitting 22(plastic), pushfitting 22 w/valve (plastic), Compression fitting 22mm w/valve, Compression fitting 15mm, M12X1, Pushfitting 15 (plastic), Pushfitting 15 w/valve (plastic), Compression fitting 22mm.
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2107528

'Flomasta 7619J'. Off-white coloured, PTFE paste intended for use as a thread sealant. For use with water up to 23°C.

Section:
5510 Sealants - Screwed Joints
Section Subtitle:
General.
WRAS Approval Number:
2107528
Expiry date:
31/07/2026
Manufacturer:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1910364

Range of stainless steel mini shock arrestors incorporating an EPDM membrane. Maximum working pressure 15 bar and maximum operating temperature 100°C

Section:
1000 Expansion Vessels
WRAS Approval Number:
1910364
Expiry date:
31/10/2024
Marking:
FLOMASTA, YEAR OF MANUFACTURE YYYY & other technical information on body.
Installation Requirements:
R001
Model:
VAH0368 - 5059340418568 – FLOMASTA ½” BSP(M) MINI SHOCK ARRESTOR
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2010100

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010100
Expiry date:
31/10/2025
Size:
Grey polymeric (PET) braided PE-X lined flexible hose assemblies with ½” captive nuts. Stainless steel braided PE-X lined flexible hose assemblies with ½” captive nuts.
Marking:
KINGFISHER GOOD HOME LOGO OR SWIRL ON TAP BODY
Installation Requirements:
R001 R006 R009 R010
Model:
5059340109831, 5059340109848, 5059340109855, 5059340109909, 5059340109916 & 5059340109923 COMBINATION TAP ASSEMBLIES
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2107131

Range of wall mounted, exposed, thermostatic bar type shower mixing valves (chromium plated brass). The246PG model incorporates a 2-way ceramic disc diverter headwork with a dome type operating member controlling the flow between an overhead shower outlet and a shower handset. The 536PG model incorporates a quarter turn ceramic disc headwork with a dome type operating member controlling the flow to a shower handset. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member which incorporates a manual override button. Both inlets incorporate a combined EPDM washer and stainless-steel strainer, as well as an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Both products are supplied with a shower hose and handset, the B36264 model also includes a shower riser to an overhead shower outlet. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2107131
Expiry date:
31/07/2026
Size:
¾” BSP (M) X ½” BSP (M) offset union
Marking:
SCREWFIX "Brand of Kingfisher" on valve body.
Installation Requirements:
R001 R010 R040
Model:
246PG & 536PG THERMOSTATIC BLENDING VALVES
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1905096

Range of stainless steel braided, EPDM lined flexible hose assemblies with captive nut inlet and push fit isolation valve outlet with brass balls. Maximum working pressure and temperature: 16.0 bar for cold water and 10.0 bar at 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
1905096
Expiry date:
31/05/2024
Size:
½” BSP captive nut x 15mm push fit (models DG170A & DG170B). ¾” BSP captive nut x 22mm push fit (models DG171A & DG171B).
Marking:
WRAS, Flomasta and year of manufacture (YYYY) on ferrule.
Installation Requirements:
R001
Model:
5052931675548 (F ½" BSP captive nut x 15mm push fit) DG170B (F ½" BSP captive nut x 15mm push fit iso valve)
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2107126

Copper corrugated hose. Maximum working pressure 10.0 bar. Maximum working temperature 90°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2107126
Expiry date:
31/07/2026
Size:
See model.
Marking:
Flomasta, WRAS and year of manufacture (YYYY) on body. Models Added December 2023 Flomasta or Kingfisher, WRAS and date of manufacture (YYYY) on body.
Installation Requirements:
R001
Model:
COPPER CORRUGATED HOSES: 03890158 15MM TUBE X ½” CAPTIVE NUT, 03890165: 15MM TUBE X 15MM TUBE. Models Added December 2023 3342978024433 15mm tube x ½” captive nut. 5059340261133 15mm tube x 15mm tube.
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2012104

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012104
Expiry date:
31/12/2025
Size:
Stainless-steel braided (DN8) PE-X lined flexible hose assembly with ½” captive nuts on model 62933-0001 Stainless-steel braided (DN6) PE-X lined flexible hose assembly with ½” captive nuts on model 62933-0101
Marking:
Watersmith on body.
Installation Requirements:
R001 R006 R009 R010
Model:
2962P
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2111052

Carbon block filter cartridge with plastic body. The cartridge may be installed with a manifold (filter head) for use with PE tubing manufactured to BS 1972. Maximum working pressure 8.6 bar. Cold water use only

Section:
1055 Filter Cartridges
WRAS Approval Number:
2111052
Expiry date:
30/11/2026
Size:
Filter: 11mm spigot. Manifold: ¼” pushfit.
Marking:
Good home (Tradename of Kingfisher), model and technical info on label on body (Filter) Kingfisher on body (Manifold) model and technical information on label on body
Installation Requirements:
R001 R120 R150 R170 R290
Model:
FC01 FILTER CARTRIDGES & SINGLE STAGE MANIFOLD
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2010102

Range of wall mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headworks with single lever operating member and self-cancelling diverter to shower outlet. The inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2010102
Expiry date:
31/10/2025
Size:
¾” BSP (M) x ½” BSP (M) offset union.
Marking:
Kingfisher good home logo on body
Installation Requirements:
R001 R030
Model:
3663602301547 COMBINATION TAP ASSEMBLIES
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2010103

Range of floor mounted, single hole, single outlet fixed combination tap assemblies (chromium plated brass with a self-cancelling diverter to shower outlet. The product incorporates a ceramic cartridge headwork and single lever operating member. The spout outlets incorporate an aerator and the product is supplied with a hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2010103
Expiry date:
31/10/2025
Size:
Stainless-steel braided EPDM lined hose assembly with 3/4" captive nut end connections.
Marking:
Kingfisher good home logo on body
Installation Requirements:
R001 R030
Model:
3663602299721 COMBINATION TAP ASSEMBLIES
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2010104

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010104
Expiry date:
31/10/2025
Size:
Grey polymeric (PET) braided PE-X lined flexible hose assemblies with ½” captive nuts.
Marking:
Kingfisher Good Home logo on body.
Installation Requirements:
R001 R006 R009 R010
Model:
3663602300663 & 5059340185606 COMBINATION TAP ASSEMBLIES
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2110106

Single hole, single outlet (swivel), combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout incorporates a push to open, push to close ‘detent’ headwork and the spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2110106
Expiry date:
31/10/2026
Size:
Stainless steel braided PEX lined flexible hose assemblies with ½" captive nuts end connections.
Marking:
Cooke & Lewis on body
Installation Requirements:
R001 R006 R009 R010
Model:
5059340139128
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2112062

Range of drain taps incorporating brass bodies, EPDM seats and washers and a non-rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1770 Taps
Section Subtitle:
Draining, metal or plastic - For above ground use only.
WRAS Approval Number:
2112062
Expiry date:
31/12/2026
Size:
See Model
Marking:
Flomasta (Brand of Kingfisher), size and PN10 on body
Installation Requirements:
R001 R511
Model:
EPH_VAL20_0049 Drain-Off Cock - Type A (15mm Capillary), EPH_VAL20_0051 Drain-Off Cock - Type A, (22mm Capillary), EPH_VAL20_0052 Drain-Off Cock - Type A, (1/2” BSP (M)), EPH_VAL20_0054 Drain-Off Cock - Type A (15mm Spigot).
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2112359

Y type fittings incorporating brass body and NBR washer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2112359
Expiry date:
31/12/2026
Size:
¾” BSP (F) captive nut x ¾” BSP( M) x 3/4” BSP (M)
Marking:
Flomasta (Brand of Kingfisher), PN10, and size on body.
Installation Requirements:
R001
Model:
EPH_WAS20_0056
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2111375

Range of stop valves with brass bodies and an EPDM washer. 15mm and 22mm for use with half-hard copper pipe of R250 acc. to EN1057. 20mm and 25mm for use with half hard copper pipe of R250 acc. to BS2871-2. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2310 Valves
Section Subtitle:
Stop, metal, screw down.
WRAS Approval Number:
2111375
Expiry date:
30/11/2026
Size:
Please refer to model.
Marking:
Flomasta, flow arrow, PN and size on body.
Installation Requirements:
R001
Model:
EPH_VAL20_0021: 15mm compression x 15mm compression, EPH_VAL20_0022: 22mm compression x 22mm compression, EPH_VAL20_0023: 15mm compression x 25mm compression, EPH_VAL20_0024: 15mm compression x 20mm compression, EPH_VAL20_0025: 22mm compression x 25mm compression.
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2112360

Range of gate valves incorporating brass bodies, brass wedge, PTFE and NBR washers and operated via a non-rising spindle headwork. Maximum operating pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
2112360
Expiry date:
31/12/2026
Size:
see model
Marking:
Flomasta, size, PN10 on body.
Installation Requirements:
R001
Model:
EPH_VAL20_0058 - 1 ½” captive nut x 22mm compression EPH_VAL20_0059 - 1 ½” BSP (F) x 28mm compression
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2112361

Range of straight, angled, tee and Y shaped isolation valves incorporating brass bodies, NBR ‘O’-rings or PTFE seats depending on model variant. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2112361
Expiry date:
31/12/2026
Size:
see models
Marking:
Flomasta, flow arrow, size and PN on body:
Installation Requirements:
R001
Model:
15mm x 15mm compression models: EPH_VAL20_0001 EPH_VAL20_0003 EPH_VAL20_0005 22mm x 22mm compression models: EPH_VAL20_0002 EPH_VAL20_0004 EPH_VAL20_0006 15mm compression x ¾” BSP (M) models: EPH_WAS20_0024 EPH_WAS20_0027 (angled valve) 15mm compression x ¾” BSP(M) x 15mm compression models: EPH_WAS20_0025 (tee valve) ¾” BSP (M) x ¾” BSP (F) Captive nut models: EPH_WAS20_0057 (Y shaped valve) 22mm compression x 1 ½” BSP (F) captive nut models: EPH_VAL20_0057 EPH_VAL20_0060
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2010105

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010105
Expiry date:
31/10/2025
Size:
Grey polymeric (PET) braided PE-X lined flexible hose assemblies with ½” captive nuts. Stainless steel braided PE-X lined flexible hose assemblies with ½” captive nuts.
Marking:
Kingfisher good home logo on body
Installation Requirements:
R001 R006 R009 R010
Model:
3663602299769, 5059340185521, 5059340185514, 5059340185538, 3663602300342, 5059340185552, 3663602320647,5059340185545, 5059340185569, 3663602301721, 5059340185613, 3663602300069, 5059340185583, 5059340185576, 5059340185590,3663602300144, 5059340185637, 5059340185682, 5059340185668 & 5059340185675 COMBINATION TAP ASSEMBLIES
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2204359

Range of quarter turn, lever handle or butterfly operated spherical valves with nickel plated brass bodies, chrome plated brass balls and PTFE seals. For use with copper pipe BS EN 1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2204359
Expiry date:
30/04/2027
Size:
SEE MODELS
Marking:
Flomasta, size, DN &PN on body. ON/OFF & size on lever.
Installation Requirements:
R001
Model:
Black handle circlip reduced bore ball valve with red and blue circle models: 5059340261218 15MM 5059340261225 22MM Black butterfly handle circlip full bore ball valve with red and blue circle models: 5059340261126 & 5059340245898 15MM
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1912082

Range of in-line servicing valves nickel-plated brass body and ball with EPDM gaskets and either a screwdriver or lever operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
1912082
Expiry date:
31/12/2024
Size:
22mm compression inlet/outlet
Marking:
SF, size, flow arrow and date of manufacture (MM/YY) on body
Installation Requirements:
R001
Model:
Screwdriver operated. 05316977 & 05317097 (Nickel plated Brass) Butterfly operated. 05317080 (Nickel plated Brass)
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1907410

Range of spherical servicing valves with nickel plated brass bodies and EPDM ‘O’-rings and can be lever type or screwdriver operated. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
1907410
Expiry date:
31/07/2024
Size:
See model.
Marking:
Models 05272037, 05271948, 03890127, 05317127 are all marked with SF (Brand of Kingfisher), size & flow arrow on body Models 5059340261195, 5059340261201 are marked with B&Q (Brand of Kingfisher), size & flow arrow on body
Installation Requirements:
R001
Model:
05272037: 15mm compression. 05317059: 15mm compression. 05317127: ISO valve with handle: 15mm compression. 5059340261201 & 03890127 Angle Servicing valve: 15mm compression x ½” captive nut. 5059340261195 & 05271948: Straight Servicing valve: 15mm compression x ½” captive nut.
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2101077

Range of in-line, non-verifiable single check valve assemblies with DZR brass bodies and spring loaded, resilient trim check valve cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
2101077
Expiry date:
31/01/2026
Size:
15 & 22 compression
Marking:
SF (Brand of Kingfisher) CR, Size and Flow Arrow on body.
Installation Requirements:
R001
Model:
05316922 (15mm compression), 05317042 (22mm compression),
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2205358

Range of spherical isolation valves incorporating brass bodies (nickel plated), brass ball (chrome plated), brass stem and EPDM ‘O’-rings (screwdriver operated or T-type handle). For use with copper pipe (EN1057). Maximum working pressure 25.0 bar (model 5059340245713) Maximum working pressure 40.0 bar (models 05316984 & 05316960) Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2205358
Expiry date:
31/05/2027
Size:
see model
Marking:
Models 05316960, 5059340245713 - SF (Brand of Kingfisher) Size & flow arrow on body Model 05316984 FLOMASTA (Brand of Kingfisher, Size & Flow arrow on body
Installation Requirements:
R001
Model:
15mm compression models: 05316984 (Full bore) 5059340245713 (Angled) 22mm compression models: 05316960 (Full bore)
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2005051

Range of double check valve assemblies consisting of two spring loaded in-line check valve cartridges housed in a DZR brass body with a drain port between the cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2005051
Expiry date:
31/05/2025
Note:
Not for use with water injected with CO2 gas.
Size:
See model.
Marking:
Models 5059340261331, 5059340245881 B&Q (BRAND OF KINGFISHER), size, CR and flow arrow on body. Models 03890110, 05316861 "SF", size, CR and flow arrow on body.
Installation Requirements:
R001
Model:
5059340261331 & 03890110 : 15mm compression inlet/outlet, 5059340245881 & 05316861: 22mm compression inlet/outlet,
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2112066

Range of drain taps incorporating brass bodies, EPDM seats and washers and a non-rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1770 Taps
Section Subtitle:
Draining, metal or plastic - For above ground use only.
WRAS Approval Number:
2112066
Expiry date:
31/12/2026
Size:
See Model
Marking:
B&Q (brand of Kingfisher), size and PN10 on body
Installation Requirements:
R001 R511
Model:
EPH_VAL20_0049a Drain-Off Cock - (15mm Capillary), EPH_VAL20_0052a Drain-Off Cock - (1/2” BSP (M)),
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2112067

Range of drain taps incorporating brass bodies, EPDM seats and washers and a non-rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1770 Taps
Section Subtitle:
Draining, metal or plastic - For above ground use only.
WRAS Approval Number:
2112067
Expiry date:
31/12/2026
Size:
See Model
Marking:
SF (Brand of Kingfisher), size and PN10 on body
Installation Requirements:
R001 R511
Model:
EPH_VAL20_0049b Drain-Off Cock - Type A (15mm Capillary), EPH_VAL20_0051 Drain-Off Cock - Type A, (22mm Capillary), EPH_VAL20_0052b Drain-Off Cock - Type A, (1/2” BSP (M)), EPH_VAL20_0054b Drain-Off Cock - Type A (15mm Spigot).
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2112364

Y type fittings incorporating brass body and NBR washer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2112364
Expiry date:
31/12/2026
Size:
¾” BSP (F) captive nut x ¾” BSP( M) x 3/4” BSP (M)
Marking:
SF (Brand of Kingfisher) PN10, and size on body.
Installation Requirements:
R001
Model:
EPH_WAS20_0056
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2112365

Range of straight, angled, tee and Y shaped isolation valves incorporating brass bodies, NBR ‘O’-rings or PTFE seats depending on model variant. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2112365
Expiry date:
31/12/2026
Size:
see models
Marking:
B&Q (Brand of Kingfisher), size and PN on body
Installation Requirements:
R001
Model:
15mm x 15mm compression models: EPH_VAL20_0001c 22mm x 22mm compression models: EPH_VAL20_0002b 15mm compression x ¾” BSP (M) models: EPH_WAS20_0024a EPH_WAS20_0027a(angled valve) 15mm compression x ¾” BSP(M) x 15mm compression models: EPH_WAS20_0025a (tee valve)
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2112366

Range of straight, angled, tee and Y shaped isolation valves incorporating brass bodies, NBR ‘O’-rings or PTFE seats depending on model variant. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2112366
Expiry date:
31/12/2026
Size:
see models
Marking:
SF (Brand of Kingfisher), size and PN on body
Installation Requirements:
R001
Model:
¾” BSP (M) x ¾” BSP (F) Captive nut models: EPH_WAS20_0057 (Y shaped valve) 22mm compression x 1 ½” BSP (F) captive nut models: EPH_VAL20_0057b EPH_VAL20_0060
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2204093

‘KSO’ range of compression fittings with brass or chrome plated brass bodies for use with copper pipe (manufactured to EN1057). The KSO14 sand KSO15 tap connector models incorporate an EPDM washer. Maximum working pressure 16.0 bar. Maximum working temperature 85˚C

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2204093
Expiry date:
30/04/2027
Size:
see model
Marking:
Flomasta (Brand of Kingfisher) and Size on fitting body EN1254-2 and Size on end nut
Installation Requirements:
R001
Model:
KSO01 couplings-cxc 6mm-54mm KSO15 couplings-cxc: 6 - 54mm compression. KSO01B repair couplings-cxc: 6 - 54mm compression. KSO01R reducing couplings cxc: 10 x 8mm compression, 12 x 8mm compression, 15 x 8mm compression, 12 x 10mm compression, 15 x 10mm compression, 15 x 12mm compression, 18 x 12mm compression, 16 x 15mm compression, 22 x 15mm compression, 28 x 15mm compression, 28 x 22mm compression, 35 x 28mm compression, 42 x 35mm compression, 54 x 42mm compression. KSO02P female adaptors-parallel: 6mm compression, x ¼" BSP (F), 6mm compression, x ⅜" BSP (F), 8mm compression, x ⅜" BSP (F), 8mm compression, x ¼" BSP (F), 10mm compression, x ¼" BSP (F), 10mm compression, x ⅜" BSP (F), 10mm compression, x ½" BSP (F), 12mm compression, x ¼" BSP (F), 12mm compression, x ⅜" BSP (F), 12mm compression, x ½" BSP (F), 15mm compression, x ¼" BSP (F), 15mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 18mm compression, x ½" BSP (F), 22mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F), 28mm compression, x 1" BSP (F), 28mm compression, x ¾” BSP (F), 35mm compression, x 1-¼" BSP (F), 42mm compression, x 1-½" BSP (F), 54mm compression, x 2" BSP (F). KSO03T male adaptors-CxMI taper: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 8mm compression, x ½" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). KSO03P male adaptors-CxMI parallel: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 8mm compression, x ½" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). KSO03P extended male adaptors-CxMI: 10mm compression, x ⅜" BSP (M), 12mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M). KSO04 tank connectors-lug style: 10 - 54mm compression. KSO04N tank connectors-nut style: 10 - 54mm compression. KSO05 elbows 90 degree-CxC: 6 - 54mm compression. 8 x 6mm compression, 10 x 8mm compression, 12 x 10mm compression, 15 x 12mm compression, 18 x 15mm compression, 22 x 15mm compression, 22 x 18mm compression, 28 x 22mm compression, 35 x 28mm compression, 42 x 35mm compression, 54 x 42mm compression, KSO06T male elbows-CxMI taper: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1¼" BSP (M), 42mm compression, x 1½" BSP (M), 54mm compression, x 2" BSP (M). KSO06 male elbows-CxMI parallel: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 28mm compression, x 1-¼" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). KSO07 female elbows-CxFI parallel: 6mm compression, x ¼" BSP (F), 6mm compression, x ⅜" BSP (F), 8mm compression, x ¼" BSP (F), 8mm compression, x ⅜" BSP (F), 10mm compression, x ¼" BSP (F), 10mm compression, x ½" BSP (F), 10mm compression, x ⅜" BSP (F), 12mm compression, x ¼" BSP (F), 12mm compression, x ⅜" BSP (F), 12mm compression, x ½" BSP (F), 15mm compression, x ¼" BSP (F), 15mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 18mm compression, x ½" BSP (F), 22mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F), 28mm compression, x ¾" BSP (F), 28mm compression, x 1" BSP (F), 28mm compression, x 1-¼" BSP (F), 35mm compression, x 1-¼" BSP (F), 42mm compression, x 1-½" BSP (F), 54mm compression, x 2" BSP (F). KSO08 wallplate elbows-CxFI: 12mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x ½" BSP (F), 28mm compression, x 1" BSP (F). KSO08 equal tees-CxCxC: 6 - 54mm compression. KSO08R reducing tees-CxCxC: 15 x 15 x 10mm compression, 15 x 15 x 22mm compression, 22 x 15 x 15mm compression, 22 x 15 x 22mm compression, 22 x 22 x 15mm compression, 22 x 22 x 28mm compression, 28 x 15 x 28mm compression, 28 x 22 x 28mm compression, 28 x 22 x 22mm compression, 28 x 28 x 15mm compression, 28 x 28 x 22mm compression, 35 x 35 x 15mm compression, 35 x 35 x 22mm compression, KSO09 threaded centre teesCxCxFI: 15mm compression, x 15mm compression, x ¼" BSP (F), 15mm compression, x 15mm compression, x ½" BSP (F), 22mm compression, x 22mm compression, x ½" BSP (F), 22mm compression, x 22mm compression, x ¾" BSP (F), 28mm compression, x 28mm compression, x ¾" BSP (F), 28mm compression, x 28mm compression, x 1" BSP (F). KSO10 threaded end tees CxFIxC: 15mm compression, x ½" BSP (F) x 15mm compression, 22mm compression, x ¾" BSP (F) x 22mm compression, KSO12 stopends-C: 6 - 54mm compression. AF14 straight tap connectors: 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F). KSO15 bent tap connectors: 15mm compression, x ½" BSP (F). KSO06P male elbows-CxMI parallel 6mmx1/4"-54mmx2" 6mm compression, x ¼ " BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼ " BSP (M), 8mm compression, x ⅜" BSP (M), 10mm compression, x ¼ " BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½ " BSP (M), 12mm compression, x ¼ " BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½ " BSP (M), 15mm compression, x ¼ " BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ½ " BSP (M), 15mm compression, x ¾ " BSP (M), 18mm compression, x ½ " BSP (M), 22mm compression, x ½ " BSP (M), 22mm compression, x ¾ " BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾ " BSP (M), 28mm compression, x 1" BSP (M), 28mm compression, x 1-¼ " BSP (M), 35mm compression, x 1-¼ " BSP (M), 42mm compression, x 1-½ " BSP (M), 54mm compression, x 2" BSP (M). KSO14 straight tap connectors 15mm x 1/2"-22mm x1" 15mm compression, x ½ " BSP (F), 15mm compression, x ¾ " BSP (F), 22mm compression, x ¾ " BSP (F), 22mm compression, x 1" BSP (F).
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2205364

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (chromium or matt black finish), incorporating a ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2205364
Expiry date:
31/05/2027
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating ½” BSP captive nut end connections.
Marking:
Cooke & Lewis & date of manufacture MM/DD/YY on body
Installation Requirements:
R001 R006 R009 R010
Model:
3663602930174 & 3663602930334
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2206061

Range of single hole, single outlet (fixed) electronically controlled combination tap assembles with brass bodies (various finishes). Flow is controlled via a solenoid valve activated via an infra -red sensor. The temperature is controlled via a ceramic cartridge and a single lever operating member. The spout outlet incorporates a pull-out spray with a plastic aerator. The trigger on the pull-out controls optional spray. The inlet adaptor incorporates a single check valve cartridge (verified by test, suitable for backflow protection against fluid category 2). The outlet incorporates a stainless-steel strainer and an aerator. Maximum working pressure 5.0 bar Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2206061
Expiry date:
30/06/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connection attached to check valve bodies with ½” BSP female inlets.
Marking:
Kingfisher Good Home Logo on body
Installation Requirements:
R001 R009 R090
Model:
5059340452524
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2012109

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with a pull-out spray mechanism. Flow is controlled via a ceramic cartridge headwork with a single lever operating member incorporating an infra-red sensor on the swivel arm which operates a solenoid valve. The spout outlet incorporates a plastic aerator and a hand spray mechanism, and the product is supplied with metal backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2012109
Expiry date:
31/12/2025
Size:
Stainless steel braided PE-X lined flexible hose assemblies with 1/2" BSP captive nut.
Marking:
Kingfisher good home logo on tap body
Installation Requirements:
R001 R006 R009 R010
Model:
5059340452555 Kitchen Mixer Chrome
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2211057

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass) incorporating ceramic cartridge headworks and single lever operating members. The spout outlet is a pull-out spray type. The spout inlets incorporate approved check valve cartridges; however, the complete assembly has not been tested to demonstrate it provides backflow prevention. The spout outlets incorporate plastic aerators. The inlet hoses incorporate stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2211057
Expiry date:
30/11/2027
Size:
PEX lined flexible hose assemblies with stainless steel braiding with 1/2" BSP captive nut
Marking:
Cooke & Lewis & date of manufacture MM/YY on body
Installation Requirements:
R001 R009 R090
Model:
3663602929956, 3663602929963 & 5059340504360 (stainless steel Brushed)
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2211058

Range of single hole, two single outlets (swivel) combination tap assemblies (brass bodies - various finishes). Incorporating ceramic cartridge headwork, single lever operating member controlling both flow and temperature to the spout and spring-loaded pull-down hose. The pull-down hose incorporates a hand spray with a self-closing trigger mechanism. The spout incorporates a ceramic disc headwork controlling the flow with a single lever operating member. The spout outlets incorporate plastic aerators. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2211058
Expiry date:
30/11/2027
Size:
PEX lined flexible hose assemblies with stainless steel braiding with 1/2" B captive nut.
Marking:
Cooke & Lewis &date of manufacture MM/YYYY on body
Installation Requirements:
R001 R009 R010 R006
Model:
3663602930075 Chrome 3663602930082 Nickle Brushed 3663602930099 Black Paint
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2211059

Range of single hole, single outlet (swivel) combination tap assemblies (brass body, chrome or black finish) incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a spring-loaded pull-down hose incorporating a spray handset with trigger mechanism that controls the spray. The spray handset incorporates a plastic aerator at the outlet. Maximum working pressure 5 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2211059
Expiry date:
30/11/2027
Size:
PEX lined flexible hose assemblies with stainless steel braiding with 1/2" BSP captive nut end connections.
Marking:
Cooke & Lewis & date of manufacture MM/YYYYY on body
Installation Requirements:
R001 R009 R010 R006
Model:
3663602930068 Chrome 3663602930273 Black
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2301083

Range of single hole, single outlet (swivel), combination tap assemblies (brass bodies with various finishes), incorporating ceramic cartridge or quarter turn ceramic disc headworks with single lever, cross-top or dome operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 or 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2301083
Expiry date:
31/01/2028
Size:
Stainless steel braided PEX lined flexible hose assemblies with 1/2" BSP captive nut end connections.
Marking:
Cooke & Lewis & date of manufacture MM/YYYY on tap body.
Installation Requirements:
R001 R006 R009 R010
Model:
3663602929840, 3663602929857, 3663602929864, 3663602930310, 3663602930457, 3663602929932, 3663602930112, 3663602930129, 3663602930655, 3663602930303, 3663602930624, 3663602930594, 3663602929994, 3663602930006, 3663602930013, 3663602930358 & 3663602930037
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2211060

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks with single lever operating members. The spout is a pull-down hose and handset with an optional spray function. The outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2211060
Expiry date:
30/11/2027
Size:
PEX lined flexible hose assemblies with stainless steel braiding with 1/2" BSP (F) captive nut end connection.
Marking:
Cooke & Lewis & Date of manufacture MM/YYYY on body
Installation Requirements:
R001 R006 R009 R010
Model:
3663602930662
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2309503

'Kingfisher PTFE Thread Seal Tape'. White coloured (semi-translucent), extruded PTFE tape. For use with water up to 85°C.

Section:
5294 Polytetrafluoroethylene (PTFE)
Section Subtitle:
Components.
WRAS Approval Number:
2309503
Expiry date:
30/09/2028
Manufacturer:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2206067

Range of single hole, single outlet (fixed) electronically controlled combination tap assembles with brass bodies (various finishes). Flow is controlled via a solenoid valve activated via an infra -red sensor. The temperature is controlled via a ceramic cartridge and a single lever operating member. The inlet adaptor incorporates a single check valve cartridge (verified by test, suitable for backflow protection against fluid category 2). The outlet incorporates a stainless-steel strainer and an aerator. Maximum working pressure 5.0 bar Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2206067
Expiry date:
30/06/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connection with additional ½” M to F adaptor.
Marking:
Kingfisher Good Home Logo & date of manufacture MM/YY on tap body.
Installation Requirements:
R001 R006 R009 R010
Model:
5059340452531 & 5059340452548
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2304358

Range of brass stopcock incorporating EPDM and PTFE washers. Compression connections, to be used with copper pipe EN1057 only. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
2310 Valves
Section Subtitle:
Stop, metal, screw down.
WRAS Approval Number:
2304358
Expiry date:
30/04/2028
Size:
5063022069986 - 22x25mm, 03891070 - 15MM X 25MM & 05332014 - 25MM X 25MM
Marking:
Model - 5063022069986 - Kingfisher, size, EN1213, flow arrow, date of manufacture: MM-YY, EN1254-2, size stamped on body and nut. Model - 03891070 - Flomasta, size, EN1213, flow arrow, date of manufacture: MM-YY, EN1254-2, size stamped on body and nut.
Installation Requirements:
R001 R120
Model:
5063022069986 - 22x25mm, 03891070 - 15MM X 25MM & 05332014 - 25MM X 25MM
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2206378

In-line spherical valve with a chrome eplasted DZR brass body, brass ball and EPDM ‘O’-rings, incorporating a single check valve cartridge (verified by test, suitable for fluid category 2) with a lever operating member. To be used with copper pipe manufactured to EN1057. verified Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2206378
Expiry date:
30/06/2027
Size:
15MM compression × 3/4" BSP (M)
Marking:
SF, CR, flow arrow & Size on body.
Installation Requirements:
R001
Model:
05316885 (15MM×3/4" STR W/MAC TAP C/W CHECK)
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2207394

Range of lever operated spherical valves with brass bodies (nickel plated), chrome plated brass balls, and EPDM ‘O’-rings. Compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2207394
Expiry date:
31/07/2027
Size:
05272082, 5059340244747 & 05317004 15mm compression x ¾” BSP (M), 05317011 15mm comp n x ¾” BSP (M), 05317035 15mm compression x 15mm compression x ¾” BSP (M), 5063022070173 15mm compression x ¾” BSP (M) x ¾” BSP (M),
Marking:
Model 05317035 & 5063022070173 flomasta, flow arrow and date of manufacture (MM-YY) on body. Model 05272082 B&Q flow arrow and date of manufacture (MM-YY) on body. Models 5059340244747, 05317004 & 05317011 SF, flow arrow and date of manufacture (MM-YY) on body.
Installation Requirements:
R001
Model:
05272082 STR WASHING MACHINE TAP CP, 5059340244747 ELBOW WASHING MACHINE TAP CP, 05317004 TEE WASHING MACHINE TAP CP, 05317035 TEE WASHING MACHINE TAP CP, 5063022070173 ISOLATING VALVE WITH T HANDLE 05317011 ISOLATING VALVE WITH T HANDLE .
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2210377

Range of screw down valves with brass or DZR brass bodies, brass or DZR brass bonnets, EPDM washers and PTFE seats. Compression connection to be used with copper pipe manufactured to EN1057. Maximum working pressure 16 bar. Maximum operating temperature 85°C.

Section:
2310 Valves
Section Subtitle:
Stop, metal, screw down.
WRAS Approval Number:
2210377
Expiry date:
31/10/2027
Size:
15, 20, 22, & 28 mm compression
Marking:
Flomasta, date of manufacture (MM/YY), EN1213, WRAS, size and flow arrow stamped on body.
Installation Requirements:
R001
Model:
03890141 15MM BRASS STOPCOCK CXC 05342150 22MM BRASS STOPCOCK CXC 05317110 28MM BRASS STOPCOCK CXC 05271979 15MM X 20MM BRASS STOPCOCK CXC 5063022070029 20MM X 20MM BRASS STOPCOCK CXC
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2212099

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) incorporating ceramic cartridge headworks with single lever operating member. The outlet is a pull-out spray type and incorporates a plastic aerator. The inlet hoses incorporate stainless steel strainers. Models 5059340452869 have a maximum working pressure of 10.0 bar. All other models have a maximum working pressure of 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2212099
Expiry date:
31/12/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies. Models 5059340504469: 3/8” captive nut. All other models: ½” captive nut.
Marking:
Kingfisher Good Home Logo & Date of Manufacture MM/YYYY on body
Installation Requirements:
R001 R009 R090
Model:
5059340504469, 5059340504421, 5059340452869, 5059340452876, 5059340452883, 5059340452890, 5059340452791 & 5059340452807
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2212100

Range of three-hole, metal, single outlet (fixed), wall mounted combination tap assemblies (brass body, black finish) incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2212100
Expiry date:
31/12/2027
Size:
½” BSP (F)
Marking:
Kingfisher Good Home Logo & Date of Manufacture MM/YYYY on body
Installation Requirements:
R001 R010 R040
Model:
5059340583013 & 5059340582931
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2304091

Single hole, single outlet (swivel) combination tap assembly (brass bodies - chrome finish), incorporating a ceramic cartridge headworks with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2304091
Expiry date:
30/04/2028
Size:
Stainless steel braided PEX lined hose with 3/8" BSP captive nut end connections.
Marking:
Kingfisher Good Home logo & Date of Manufacture MM/YYYY on body
Installation Requirements:
R001 R009 R010 R040
Model:
5059340452852
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2304092

Range of single hole, single outlet (swivel) combination tap assemblies, (brass bodies – various finishes) incorporating quarter turn ceramic disc or ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 BAR

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2304092
Expiry date:
30/04/2028
Size:
Stainless steel braided PEX lined hose with 1/2" BSP captive nut end connections.
Marking:
Kingfisher Good Home Logo & Date of Manufacture MM/YYYY on body.
Installation Requirements:
R001 R006 R009 R010
Model:
5.0 BAR 5059340452906, 5059340452913, 5059340452623, 5059340504506, 5059340453897, 5059340452593, 5059340452609, 5059340452616, 5059340452562, 5059340452579, 5059340452586, 5059340452708, 5059340452715, 5059340452722, 5059340452739, 5059340452746, 5059340452753, 5059340452760, 5059340452777 & 5059340452784. 10.0BAR 5059340452821, 5059340452814, 5059340452845, 5059340452838, 5059340452678, 5059340452685, 5059340452661 & 5059340452692.
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2306072

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections. Some models incorporate screwdriver operated isolation valves. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2306072
Expiry date:
30/06/2028
Size:
Please refer to model.
Marking:
FLOMASTA (Brand of Kingfisher), WRAS and date of manufacture (YYYY) on crimped sleeve. Models added December 2023 Flomasta or Kingfisher, WRAS and date of manufacture (YYYY) on crimped sleeve.
Installation Requirements:
R001
Model:
05272204 (15mm compression x M10) - Bore size DN8. 05272198 (15mm compression x M12) - Bore size DN8. 05272310 (F ½" BSP X F ½" BSP) - Bore size DN10. 05272174(15mm compression iso valve x F ½"BSP) - Bore size DN10. 5052931708345 (22mm compression iso valve x F ¾" BSP) - Bore size DN13. 05272150, 05272167 (22mm x F ¾" BSP) - Bore size DN13. 05272181 (15mm compression x F ⅜" BSP) - Bore size DN10. 05272228 (15mm compression x F ½" BSP) - Bore size DN10. 05272402 (15mm compression x 10mm compression) - Bore size DN10. 05272242 (15mm compression x 15mm compression) - Bore size DN10. 05272327 (15mm compression x F ¾" BSP) - Bore size DN10. 05272280 (15mm compression x 22mm compression) - Bore size DN10. 5052931708352 (15mm compression iso valve x F ¾" BSP) - Bore size DN10. Models Added December 2023: 05272334, 05272372, 05272396 (22mmxF3/4" BSP)-Bore size DN13. 5052931675531,, 05272303, 05272358, 05272389, 5052931675548 (15mm compression xF½"BSP)- Bore size DN10. 05272365 (15mm compressionxF"BSP) Bore size DN10. 5052931462629, 05272273, 05272341(15mm compressionx15mm compression)- Bore size DN10. 05280469 (F ½"BSPXF½"BSP)-Bore size DN10. 05272266 (15mm compression iso valve xF½"BSP)- Bore size DN10.
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2307069

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure: See Models

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2307069
Expiry date:
31/07/2028
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” or 3/8” BSP captive nut end connections.
Marking:
Kingfisher Good Home Logo on body
Installation Requirements:
R001 R006 R009 R010
Model:
3/8” Models 5059340583044 - (5.0bar) 5059340612751 - (5.0bar) 5059340484990 - (5.0bar) 5059340485201- (5.0bar) 5059340485218- (5.0bar) 5059340712895 - (5.0bar) ½” Models 5059340583099 - (10.0bar) 5059340612737 - (10.0bar)
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2307356

Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets of all models incorporate single check valve cartridges (verified by test - suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression fitting connection to be used with copper pipe EN1057 only. Maximum working pressure 10 bar. Maximum operating temperature 85°C except for models VAH0347 - 5059340245775 & VAH0348 - 5059340245782 both 60°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2307356
Expiry date:
31/07/2028
Size:
See models
Marking:
FLOMASTA LOGO (Brand of Kingfisher), CR, DN, FLOW ARROW & DATE OF MANUFACTURE DD/YY ON BODY
Installation Requirements:
R001 R010 R040
Model:
VAH0345 - 5059340245751 – Flomasta 15mm TMV VAH0346 - 5059340245768 – Flomasta 22mm TMV VAH0347 - 5059340245775– Flomasta 15mm TMV with MX Tails VAH0348 - 5059340245782– Flomasta 22mm TMV with MX Tails
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.