Heaters

Section Code 1390 : Electric, thermal storage, mains fed, open outlet.

Back To Directory Sections

WRAS Approval Number: 1706100

Range of under counter instantaneous hot water units with countertop mounted dispensing fonts. Flow is controlled via a solenoid valve activated by a push button. The inlet incorporates a plastic strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The countertop font outlet incorporates a plastic aerator. The products are supplied with a white PVC coated, hytril lined, inlet connection hose. Maximum working pressure 7.0 bar. Maximum operating temperature 95˚C. Cold water supply only.

  • Section: 1390 Heaters
  • Section Subtitle: Electric, thermal storage, mains fed, open outlet.
  • WRAS Approval Number: 1706100
  • Expiry date: 30/06/2022
  • Note: If the vent or overflow is discharged to drain it must be via a type AA, AB or AD air gap or in accordance with EN1717.
  • Size: ¾” BSP Captive nut.
  • Marking: Instanta, model and operating info on right side panel of undercounter unit. Instanta logo on countertop font.
  • Installation Requirements R001 R007
  • Model
    UCD7/S, UCD7/L, UCD12/S, UCD12/L, UCD40/STA/SS, UCD40/STA/SL, UCD40/STA/LL, UCD47/S, UCD47/L, UCD47/SS, UCD47/LL & UCD47/SL. From July 2019, some models will be renamed and will become: UCD7/S = UCB5. UCD7/L = UCB10. UCD12/S = UCB15. UCD40/STA/SS = UCB40T. UCD47/S = UCB47 UCD47/SS = UCB47T.
  • Manufacturer: Instanta Ltd
    Company Name
    Instanta Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1806316

‘Extra Life Series’ above sink range of electrically heated vented water heaters (cased and insulated) incorporating a blue coloured, enamel lined steel tank. Maximum operating temperature 75°C.

  • Section: 1390 Heaters
  • Section Subtitle: Electric, thermal storage, mains fed, open outlet.
  • WRAS Approval Number: 1806316
  • Expiry date: 30/06/2023
  • Note: Open outlet use only.
  • Size: ½” BSP (M) inlet and outlet
  • Marking: Eldom on front case. Eldom Invest Ltd, address, model number and other technical information on adhesive label on front case.
  • Installation Requirements R001 R040
  • Model
    Extra Life Series: Above sink without pressure (NMB) 72324NMB - 7 litres. 72325NMB - 10 litres. 72326NMB - 15 litres.
  • Manufacturer: ELDOMINVEST LTD.
    Company Name
    ELDOMINVEST LTD.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909007

Under-sink, electrically heated vented water heaters (cased and insulated). The tank is stainless steel and incorporates a flow switch. Maximum operating temperature 98˚C

  • Section: 1390 Heaters
  • Section Subtitle: Electric, thermal storage, mains fed, open outlet.
  • WRAS Approval Number: 1909007
  • Expiry date: 30/09/2024
  • Note: Open outlet use only.
  • Size: ⅜” BSP (M)
  • Marking: Cassellie, model & technical info on adhesive label on underside of body.
  • Installation Requirements R001 R040 R120 R150
  • Model
    BOI002
  • Factor: CASSELLIE LTD
    Company Name
    CASSELLIE LTD
    View All Listings by this Company
  • Manufacturer: Zhuhai Orager Information Technology Co.
    Company Name
    Zhuhai Orager Information Technology Co.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2107319

Range of vertical vented cased copper cylinders with indirect coils. The secondary circuit incorporates a thermostatic mixing valve. The inlet consists of a ball valve with strainer, inline non verifiable single check valve and mini shock arrestor. Cylinder are supplied with a factory fitted immersion heater. Maximum working pressure - secondary 6.0 bar, primary 2.2 bar. Maximum operating temperature - secondary is 60°C, primary 85°C

  • Section: 1390 Heaters
  • Section Subtitle: Electric, thermal storage, mains fed, open outlet.
  • WRAS Approval Number: 2107319
  • Expiry date: 31/07/2026
  • Size: 22mm compression (secondary) 1” BSP (F) primary
  • Marking: Copper Industries, model name, model size, safety markings, manufacturers contact details, Maxi Pod, date of manufacture (DD/MM/YY) and ID no on body.
  • Installation Requirements R001
  • Model
    Maxi Pod 210 Maxi Pod 250 Maxi Pod 300
  • Manufacturer: Copper Industries Ltd
    Company Name
    Copper Industries Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1909127

Under-sink, electrically heated vented water heaters (cased and insulated). The tank is stainless steel and incorporates a flow switch. Maximum operating temperature 98˚C

  • Section: 1390 Heaters
  • Section Subtitle: Electric, thermal storage, mains fed, open outlet.
  • WRAS Approval Number: 1909127
  • Expiry date: 30/09/2024
  • Note: Open outlet use only.
  • Size: ⅜” BSP (M)
  • Marking: Ellsi Company details, model & technical info on adhesive label on underside of body.
  • Installation Requirements R001 R040 R120 R150
  • Model
    PDT000051 UNDER COUNTER ELECTRICALLY HEATED VENTED WATER HEATER
  • Factor: Ellsi Ltd.
    Company Name
    Ellsi Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2111033

A range of under sink electrically heated vented water heaters (cased and insulated) with a stainless-steel cylinder incorporating a temperature sensor and a float switch (not flow control) Maximum operating temperature 98°C.

  • Section: 1390 Heaters
  • Section Subtitle: Electric, thermal storage, mains fed, open outlet.
  • WRAS Approval Number: 2111033
  • Expiry date: 30/11/2026
  • Marking: FOHEN LIMITED, model Number, CE and other info on Adhesive Label on base of body
  • Installation Requirements R001
  • Model
    W/B98 2B98X 2B98W
  • Factor: Zhuhai Orager Information Technology Co.
    Company Name
    Zhuhai Orager Information Technology Co.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2111346

Range of under-sink, electrically heated vented water heaters (cased and insulated). Maximum operating temperature 98˚C

  • Section: 1390 Heaters
  • Section Subtitle: Electric, thermal storage, mains fed, open outlet.
  • WRAS Approval Number: 2111346
  • Expiry date: 30/11/2026
  • Size: 3/8” BSP
  • Marking: LISHUI, model and other tech info on adhesive label on body
  • Installation Requirements R001
  • Model
    2.4L,1500KW: LS5001351-11, LS5001351-12, LS5001351-21, LS5001351-22, LS5001352-11, LS5001352-12, LS5001352-21, LS5001352-22, LS5001353-11, LS5001353-12, LS5001353-21, LS5001353-22, LS5001354-12, LS5001354-32, LS5001354-22, LS5001354-42, LS5001355-11, LS5001355-12, LS5001355-21, LS5001355-22, LS5001357-11, LS5001357-12, LS5001357-21, LS5001357-22, LS5001358, LS5001361, LS5001362, LS5001363, LS5001364, LS5001365, LS5001366, LS5001367, LS5001368. 4L,2300KW: LS5001371, LS5001374, LS5001372-01, LS5001372-02, LS5001372-03, LS5001372-04, LS5001376-01, LS5001376-02, LS5001376-03, LS5001377-01, LS5001377-02, LS5001377-03, LS5001377-04, LS5001373, LS5001375.
  • Factor: Xiamen Lishui Technology Co., Ltd.
    Company Name
    Xiamen Lishui Technology Co., Ltd.
    View All Listings by this Company
  • Manufacturer: Xiamen Lilin Technology Co., Ltd.
    Company Name
    Xiamen Lilin Technology Co., Ltd.
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of