Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #251255017

'SG M494'. White coloured (opaque) silicone grease. Apply as per manufacturer's instructions. For use with water up to 85°C.

Section:: 5160 Lubricants
Expiry date:: 31/12/2030

Approval Holder:: CHT UK Bridgwater Limited

Company Name
CHT UK Bridgwater Limited
Postcode
TA6 6AJ

View All Listings by this Company

WRAS Approval Number: #2111543

'P193'. Extruded, multi-layered pipe comprising of an off-white (translucent), PEX-Xc inner layer, aluminium middle layer and white coloured (opaque), PE-Xb outer layer. For use with water up to 85°C.

Section:: 5240 Polyethylene
Section Subtitle:: Components. All components listed in this section have been tested for water contact suitability of material only.
WRAS Approval Number:: 2111543
Expiry date:: 30/11/2026

Approval Holder:: ICMA S.p.A

Company Name
ICMA S.p.A
Address
Via Garavaglia, 4, 20012 Cuggiono, Milan
Country
Italy

View All Listings by this Company

WRAS Approval Number: #251255014

'BorSafe™ HE3490-ELS-H,'. Black coloured, extruded polyethylene material. For use with water up to 60°C.

Section:: 5245 Polyethylene
Section Subtitle:: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 251255014
Expiry date:: 31/12/2030

Approval Holder:: Borouge Pte. Ltd.

Company Name
Borouge Pte. Ltd.

View All Listings by this Company

WRAS Approval Number: #2311580

'Anchor Pro Plus'. Site applied, two-part (supplied with internal mixing nozzle so no manual mixing required), brown coloured chemical anchor resin. Apply as per manufacturer's instructions dated 2025 - 12 - 09. Cure for 4 days@5°C. For use with water up to 23°C. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5311 Resin Anchors
Expiry date:: 30/11/2028

Approval Holder:: Veidec AB

Company Name
Veidec AB
Address
Videvagen 9, SE-247 64 Veberod
Country
Sweden
Phone
+464 6238900

View All Listings by this Company

WRAS Approval Number: #2310573

'ResiFIX Max Performance Epoxy'. Site applied, grey coloured chemical anchor resin. Apply as per manufacturer's European Technical Assessment ETA-25/1132 of 2025/11/19. Cure for 48 hours@5°C. For use with water up to 23°C. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5311 Resin Anchors
Expiry date:: 31/10/2028

Approval Holder:: CELO Befestigungssysteme GmbH

Company Name
CELO Befestigungssysteme GmbH
Address
Industriestr. 6m 86551 Aichach
Country
Germany

View All Listings by this Company

WRAS Approval Number: #251255013

'JJSXEPDMIRHD50 (shore hardness 50) & JJSXEPDMIRHD70 (shore hardness 70)'. Black coloured, compression moulded EPDM materials. Tested in-radius size 0.99mm. For use with water up to 85°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 251255013
Expiry date:: 31/12/2030

Approval Holder:: JingJiang SanXing Rubber Products Co. Ltd.

Company Name
JingJiang SanXing Rubber Products Co. Ltd.
Address
No. 10, West ZhongZhou Road, JingJiang City, JiangSu Province
Country
China

View All Listings by this Company

WRAS Approval Number: #2305568

'202973 Tradesave Thread Lock TSTTS050'. Blue coloured pipe sealant. Apply as per manufacturer's instructions version '1.0', issue date '01/12/2025'. Cure for 24 hours@23°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5510 Sealants - Screwed Joints
Section Subtitle:: General.
WRAS Approval Number:: 2305568
Expiry date:: 31/05/2028

Approval Holder:: City Plumbing Supplies Holdings Ltd.

Company Name
City Plumbing Supplies Holdings Ltd.
Address
Highbourne House, Eldon Way, Crick
Postcode
NN6 7SL

View All Listings by this Company

WRAS Approval Number: #251115321

Section:: 0463 Combination Tap Assemblies
Description:: A Single hole tap(s) with a single outlet and a fixed spout, incorporating a manual diverter to a shower outlet.
Floor mounted stainless steel braided EPDM lined inlet hoses Undefinable air gap see IRN's
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
F9920-**	Various	1/2" Captive nut	10 bar	60 °C	LAN BIAO	Handle	No	Ceramic cartridge	Not Applicable	Aerator

Notes & Further Information: **Representing different surface color treatments： No Suffix = Chrome, H: Black DYB: Matte White BZ: Pearl White HGTS: Red Antique Bronze HTL: Yellow Bronze Brushed Q: Bronze QTSL: Bronze Brushed Bright QTS: Bronze Brushed Matte STS: Acid Copper Brushed SDMGJ: Water-Plated Rose Gold N: Nickel Brushed Bright NP: Nickel Brushed TJ: Titanium Gold TJLS: Titanium Gold Brushed G: Zirconium gold GJS: Zirconium Gold Brushed GJSY: Zirconium Gold Brushed Matte PGJFY: Zirconium Gold Brushed Bright PLSJ: Brushed Gold LSJY: Brushed Gold Matte MGJ: Rose Gold MGJL: Rose Gold Brushed DMGJ: Light Rose Gold Brushed HTS: Red Copper Brushed QHP: Gunmetal Gray LSQH: Gunmetal Gray Brushed LHMGJ: Brushed Yellow Rose Gold

Approval Holder:: Taizhou Lanbiao Sanitary Ware Co., Ltd

Company Name
Taizhou Lanbiao Sanitary Ware Co., Ltd
Address
XUDOU VILLAGE QINGGANG YUHUAN ZHEJIANG
Postcode
317600
Country
China
Phone
13736601565
General Email
984458082@qq.com

View All Listings by this Company
Manufacturers:: TAIZHOU LANBIAO SANITARY WARE CO., LTD

WRAS Approval Number: #251215902

Section:: 0683 Combination Tap Assemblies
Description:: A Range of Multiple Function tap(s). In addition to normal tap function includes at least one of following functions chilled, filtered, carbonated, instantaneous hot water.
Deck Mounted Additional Boiling, Chilled and Sparkling Water features Cold water function can also be activated via an Infra-red sensor. Stainless steel braided PEX lined inlet hoses Stainless steel braided PEX lined connection hoses Capable of achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R007 R009 R160
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
24015**	Various	1/2" BSP (F)	8 bar	85 °C	NLB	On body	No	Ceramic cartridge	C-plate	Aerator	Interconnecting Hoses,
25001**	Various	1/2" BSP (F)	8 bar	85 °C	NLB	On body	No	Ceramic cartridge	C-plate	Aerator	Interconnecting Hoses,

Notes & Further Information: ** represent different finishes No suffix: Chrome plated H: Black, N: Nickel brushed, GJS: Zirconium gold brushed, G: Zirconium gold, QTSL: Brushed bronze bright, QTS: Brushed bronze matte, TJ: Titanium gold, TJLS: Titanium gold brushed, MGJ: Rose gold, MGJL: Rose gold brushed, HGT: Red bronze, HTL: Yellow bronze brushed, HTS: Red bronze brushed, PVDQH: Gun grey, HQ: Gun grey brushed, Q: Bronze, DYB: Matte white, STS: Acid copper brushed, BZ: Spray pearl white, DMGJ: Light rose gold brushed.

Approval Holder:: Taizhou New Lanbiao Intelligent Technology Co.,Ltd

Company Name
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Address
JIAOXI INDUSTRIAL ZONE QINGGANG, YUHUAN TAIZHOU ZHEJIANG
Country
China

View All Listings by this Company
Manufacturers:: TAIZHOU NEW LANBIAO INTELLIGENT TECHNOLOGY CO.,LTD

WRAS Approval Number: #251002037

Range of combined bath fillers and overflow waste assemblies with plastic bodies (various finishes). The outlet incorporates a plastic aerator. The products are supplied with a cable operated pop-up waste. Maximum operating temperature 60°C.

Section:: 0690 Combination Tap Assemblies
Section Subtitle:: Combined bath filler and overflow(s).
WRAS Approval Number:: 251002037
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Stainless steel braided EPDM lined flexible hose assembly with a ½” BSP (F) captive nut end connection.
Marking:: BAGNODESIGN LONDON on waste operating member
Installation Requirements:: R001 R576
Expiry date:: 31/10/2030
Model:: BDP-WBT-110-90U-A-XX - 900mm 'XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)

Approval Holder:: BAGNODESIGN (SANIPEXGROUP)

Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
Country
United Kingdom
General Email
dan@sanipexgroup.com

View All Listings by this Company

WRAS Approval Number: #251115319

Section:: 2011 Shower Valves
Description:: A Shower valve(s) with thermostatic temperature control, incorporating a manual diverter between outlets.
Wall Mounted Concealed Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
AHT2		BSP 1/2" (F)	10 bar	65 °C	Kind	Body	No	1/2 Turn ceramic disc	Not Applicable	Not Applicable

Approval Holder:: Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

WRAS Approval Number: #251212302

Section:: 0400 Combination Tap Assemblies - Bidet
Description:: A Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
Deck mounted. Stainless-steel braided EPDM lined flexible inlet hose assemblies. Capable of achieving AUK3 Tap Gap.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
5001JC45-1	Chrome	1/2 BSP(F)	10 bar	85 °C	HUANRI	BODY	No	Ceramic cartridge	C-plate	Aerator

Approval Holder:: Zhejiang Huanri Sanitation Co,.Ltd.

Company Name
Zhejiang Huanri Sanitation Co,.Ltd.
Address
Xuanmen Industrial Zone, Lupu Town Yuhuan County Zhejiang Province
Country
China

View All Listings by this Company
Manufacturers:: Zhejiang Huanri Sanitation Co,.Ltd.

WRAS Approval Number: #251215311

Section:: 0442 Thermostatic cartridges
Description:: A Range of Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
Plastic body/bodies
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001
Expiry date:: 31/12/2030

Product Identification	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list
XB-CT48S001	49mm	16 bar	85 °C	Tzxinbai, XB-CT48S001	Body	No
XB-CT48S002	49mm	16 bar	85 °C	Tzxinbai, XB-CT48S002	Body	No
XB-CT48S003	49mm	16 bar	85 °C	Tzxinbai, XB-CT48S003	Body	No
XB-CT07S	34mm	16 bar	85 °C	Tzxinbai, XB-CT07S	Body	No
XB-CT27S	27mm	16 bar	85 °C	Tzxinbai, XB-CT27S	Body	No
XB-CT28S	28mm	16 bar	85 °C	Tzxinbai, XB-CT28S	Body	No

Product Images

Approval Holder:: TAIZHOU XINBAI SANITARY WARE CO., LTD.

Company Name
TAIZHOU XINBAI SANITARY WARE CO., LTD.
Address
Qinggang Industrial Park, Yuhuan, Taizhou
Country
China

View All Listings by this Company
Manufacturers:: Taizhou Xinbai Sanitary Ware Co., Ltd.

WRAS Approval Number: #260115901

Section:: 0445 Combination Tap Assemblies
Description:: A Range of Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
Deck Mounted Undefinable Air Gap - See IRN's Stainless-steel braided PEX lined inlet hoses Stainless-steel braided PEX lined connection hoses Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R007 R009 R090
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
JD-WK313P* **	Various	1/2" Captive nut	10 bar	60 °C	Kind	Operating member	No	Ceramic cartridge	Metal Backnuts	Aerator	Flow Regulator Fitted,
JD-WK323P* **	Various	1/2" Captive nut	10 bar	60 °C	Kind	Operating member	No	Ceramic cartridge	Metal Backnuts	Aerator	Flow Regulator Fitted,
JD-WK2003* **	Various	1/2" Captive nut	10 bar	60 °C	Kind	Operating member	No	Ceramic cartridge	Metal Backnuts	Aerator	Flow Regulator Fitted,
JD-WK2003-3* **	Various	1/2" Captive nut	10 bar	60 °C	Kind	Operating member	No	Ceramic cartridge	Metal Backnuts	Aerator	Flow Regulator Fitted,
JD-WK743* **	Various	1/2" Captive nut	10 bar	60 °C	Kind	Operating member	No	Ceramic cartridge	Metal Backnuts	Aerator	Flow Regulator Fitted, Interconnecting Hoses,

Notes & Further Information: 1. The first * denotes different handles and can be replaced with A, B, C and D. 2. The second ** represents different types of finishes as follows. C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: white CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:: Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

WRAS Approval Number: #251212305

Section:: 0450 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a fixed spout.
Deck mounted. Stainless-steel braided EPDM lined flexible inlet hose assemblies. Capable of achieving AUK3 Tap Gap.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Wastes	Includes
4001JC45-1	Chrome	1/2BSP(F)	10 bar	85 °C	HUANRI	BODY	No	Ceramic cartridge	C-plate	Aerator	Click Type
4001JC45-3	Chrome	1/2BSP(F)	10 bar	85 °C	HUANRI	BODY	No	Ceramic cartridge	C-plate	Aerator

Notes & Further Information: The model 4001JC45-1 and 4001JC45-3 taps are same, except that 4001JC45-1 comes with a click-type waste fitting included during sale, while the 4001JC45-3 model does not.

Approval Holder:: Zhejiang Huanri Sanitation Co,.Ltd.

Company Name
Zhejiang Huanri Sanitation Co,.Ltd.
Address
Xuanmen Industrial Zone, Lupu Town Yuhuan County Zhejiang Province
Country
China

View All Listings by this Company
Manufacturers:: Zhejiang Huanri Sanitation Co,.Ltd.

WRAS Approval Number: #260116303

Section:: 0450 Combination Tap Assemblies
Description:: A Single hole tap(s) with a single outlet and a fixed spout.
Deck Mounted Capable of Achieving AUK3 Tap Gap Stainless steel braided EPDM lined inlet hose
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
T5002	Chrome plating	½” BSF (F) Captive nut	5 bar	65 °C	SONAS	on operating member	No	Ceramic cartridge	C-plate	Aerator

Approval Holder:: Sonas Bathrooms

Company Name
Sonas Bathrooms
Address
103 Northwest Business Park Ballycoolin, Dublin 15
Postcode
D15 R88
Country
Ireland
General Email
2894475300@qq.com

View All Listings by this Company
Manufacturers:: Zhejiang Sanjing Sanitary Ware Technology Co., Ltd.

WRAS Approval Number: #260116304

Section:: 0470 Combination Tap Assemblies
Description:: A Single hole tap(s) with a single outlet and a swivel spout.
Deck Mounted Stainless steel braided EPDM lined inlet hoses Capable of achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
USH0229	chrome plated	½” BSF (F) Captive nut	5 bar	65 °C	SONAS	on operating member	No	Ceramic cartridge	C-plate	Flow Straightener

Approval Holder:: Sonas Bathrooms

Company Name
Sonas Bathrooms
Address
103 Northwest Business Park Ballycoolin, Dublin 15
Postcode
D15 R88
Country
Ireland
General Email
2894475300@qq.com

View All Listings by this Company
Manufacturers:: Zhejiang Sanjing Sanitary Ware Technology Co., Ltd.

WRAS Approval Number: #260108301

Section:: 0470 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a swivel spout.
Deck Mounted Stainless steel braided PE or PEX lined flexible inlet hoses Capable of achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
521502 - KANO TP HP CHR	Chrome (CHR)	3/8""	10 bar	70 °C	BLANCO	body	Yes	Ceramic cartridge	Not Applicable	Aerator
525028 - KANO TP HP ANT / CHR	ANT / CHR	3/8""	10 bar	70 °C	BLANCO	body	Yes	Ceramic cartridge	Not Applicable	Aerator
525030 - KANO TP HP SGW / CHR	SGW / CHR	3/8""	10 bar	70 °C	BLANCO	body	Yes	Ceramic cartridge	Not Applicable	Aerator
525033 - KANO TP HP CAF / CHR	CAF / CHR	3/8""	10 bar	70 °C	BLANCO	body	Yes	Ceramic cartridge	Not Applicable	Aerator
526175 - KANO TP HP BLA / CHR	BLA / CHR	3/8""	10 bar	70 °C	BLANCO	body	Yes	Ceramic cartridge	Not Applicable	Aerator
526667 - KANO TP HP BL	BL	3/8""	10 bar	70 °C	BLANCO	body	Yes	Ceramic cartridge	Not Applicable	Aerator
526950 - KANO TP HP VGR / CHR	VGR / CHR	3/8""	10 bar	70 °C	BLANCO	body	Yes	Ceramic cartridge	Not Applicable	Aerator
526951 - KANO TP HP SOW / CHR	SOW / CHR	3/8""	10 bar	70 °C	BLANCO	body	Yes	Ceramic cartridge	Not Applicable	Aerator

Notes & Further Information: CHR - Chrome ANT - anthracite SGW - silgranite white CAF - coffee BLA - black BL - black matt VGR - volcano grey SOW - soft white

Approval Holder:: BLANCO GmbH + Co KG

Company Name
BLANCO GmbH + Co KG
Address
Flehinger Strasse 59 Oberderdingen
Postcode
75038
Country
Germany
General Email
certification-water@blanco.de

View All Listings by this Company

WRAS Approval Number: #260117301

Section:: 0470 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a swivel spout.
Deck Mounted. Capable of achieving AUK3 tap gap. EPDM lined Stainless Steel braided inlet hoses.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
ROC2MB	MATT BLACK	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
ROC2RC	REGENCY COPPER	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
ROC2AB	ARTISAN BRASS	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
ROC2BN	BRUSHED NICKEL	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
ROC2CP	CHROME	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
ROC2BB	BRUSHED BRASS	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
ROC2PB	PATINATED BRASS	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
TU81073BV	MATT BLACK	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
TU81073RC	REGENCY COPPER	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
TU81073AB	ARTISAN BRASS	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
TU81073PB	PATINATED BRASS	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
TU81073CP	CHROME	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
TU81073BB	BRUSHED BRASS	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
TU81073BS	BRUSHED NICKEL	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
VITCP	CHROME	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
VITPB	PATINATED BRASS	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
VITBS	BRUSHED NICKEL	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
SA2CP	CHROME	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
SA2PB	PATINATED BRASS	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
SA2BN	BRUSHED NICKEL	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
SA2CP	CHROME	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
ZO3BB	BRUSHED BRASS	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
ZO2BB	BRUSHED BRASS	1/2" BSP	5 bar	60 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator

Approval Holder:: Clearwater Products Limited t/a Sterling

Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Country
United Kingdom
Phone
0168429955
General Email
2894475300@qq.com

View All Listings by this Company
Manufacturers:: ZHEJIANG CORAL SANITARY CO., LTD

WRAS Approval Number: #260117302

Section:: 0470 Combination Tap Assemblies
Description:: A Single hole tap(s) with a single outlet and a swivel spout.
Deck Mounted Capable of achieving AUK3 Tap Gap EPDM lined Stainless Steel Braided inlet hoses
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
EMB20CP	CHROME	1/2" BSP	5 bar	65 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
EMB20BN	BRUSHED NICKEL	1/2" BSP	5 bar	65 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
EMB20MB	MATT BLACK	1/2" BSP	5 bar	65 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
EMB20AB	ARTISAN BRASS	1/2" BSP	5 bar	65 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
EMB20BB	BRUSHED BRASS	1/2" BSP	5 bar	65 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
EMB20PB	PATINATED BRASS	1/2" BSP	5 bar	65 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator

Approval Holder:: Clearwater Products Limited t/a Sterling

Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Country
United Kingdom
Phone
0168429955
General Email
2894475300@qq.com

View All Listings by this Company
Manufacturers:: ZHEJIANG CORAL SANITARY CO., LTD

WRAS Approval Number: #260112302

Section:: 0520 Combination Tap Assemblies
Description:: A Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.
Wall mounted Undefinable Air Gap - See IRN's
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R020 R040
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
1001JC45	Chrome	½” BSP (M) x ¾” BSP (M) offset union	10 bar	85 °C	HUANRI	Rear of body	No			Aerator

Approval Holder:: Zhejiang Huanri Sanitation Co,.Ltd.

Company Name
Zhejiang Huanri Sanitation Co,.Ltd.
Address
Xuanmen Industrial Zone, Lupu Town Yuhuan County Zhejiang Province
Country
China

View All Listings by this Company
Manufacturers:: Zhejiang Huanri Sanitation Co,.Ltd.

WRAS Approval Number: #251204015

Range of two hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes) incorporating quarter turn ceramic disc headworks and lever type operating members. The spout outlet incorporates a plastic aerator and supplied with metal back nuts. Maximum operating pressure 5.5 bar. Maximum operating temperature 60°C

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:: 251204015
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M)
Marking:: CAL’ On rear of body
Installation Requirements:: R001 R006 R010
Expiry date:: 31/12/2030
Model:: ACT3070 ACT3071 ACT3072 ACT3099 ACT3100 ACT3101 ACT3102 ACT3119 Models ‘ACT3070 (Chrome), ‘ACT3071 (Brushed Nickel)’, ACT3072 (Brushed Brass) are the same and only differ in the tap finish. Models ‘ACT3099’ (Chrome), ACT3100 (Brushed Nickel), ACT3101 (Brushed Brass), ACT3102 (Aged Brass), ACT3119 (Matt Black)

Approval Holder:: Norcros Group (Holdings) Limited T/A Abode

Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road Barnsley
Postcode
S75 1HT
Country
United Kingdom
Phone
01226 283434
General Email
info@abode.eu

View All Listings by this Company

WRAS Approval Number: #251204707

Range of expansion vessels having stainless steel bodies. Maximum operating pressure 7 - 25 bar. Maximum operating temperature 85°C

Section:: 1000 Expansion Vessels
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: Global Water Solutions and technical info on label.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: MTRA-2-7 MTRA-3-7 MTRA-4-7 MTRA-6-7 MTRA-8-7 MTRA-12-7 MTRA-18-7 MTRA-21-7 MTRA-35-7 MTRA-60-7 MTRA-80-7 7 bar Available in the following sizes: 1” BSP (M), 1” BSP (F), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1” NPT (F), ¼” NPT (M), 22mm compression fitting MTRA-100-7 MTRA-150-7 7 Bar Available in the following sizes: 1” BSP (M), 1” BSP (F), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1” NPT (F), ¼” NPT (M) STRA-8-7 STRA-18-7 7 bar Available in the following sizes: 1” BSP (M), 1” BSP (F), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1” NPT (F), ¼” NPT (M), 22mm compression fitting PTRA-12-7 PTRA-16-7 PTRA-18-7 7 bar Available in the following sizes: 1” BSP (M), 1” BSP (F), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1” NPT (F), ¼” NPT (M), 22mm compression fitting MTPA-2-10 MTPA-3-10 MTPA-4-10 MTPA-6-10 MTPA-8-10 MTPA-12-10 MTPA-18-10 MTPA-20-10 MTPA-24-10 MTPA-35-10 MTPA-40-10 10 bar Available in the following sizes: 1” BSP (M), 1” BSP (F), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1” NPT (F), ¼” NPT (M), 22mm compression fitting MTPA-22-10 10 bar Available in the following sizes: ¾” quick connect MTPA-60-10 MTPA-80-10 MTPA-100-10 MTPA-130-10 MTPA-150-10 10 bar Available in the following sizes: 1” BSP (M), 1” BSP (F), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1” NPT (F), ¼” NPT (M) MTPB-2-10 MTPB-4-10 MTPB-8-10 MTPB-12-10 MTPB-18-10 MTPB-24-10 MTPB-35-10 10 bar Available in the following sizes: 1” BSP (M), 1” BSP (F), ¾” BSP (M), 1” NPT (M), 1” NPT (F), 22mm compression fitting STPA-18-10 STPA-24-10 10 bar Available in the following sizes 1” BSP (M), 1” BSP (F), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1” NPT (F), ¼” NPT (M), 22mm compression fitting STPA-22-10 10 bar Available in the folowoing sizes ¾” quick connect STPB-8-10 STPB-18-10 STPB-24-10 10 bar Available in the following sizes 1” BSP (M), 1” BSP (F), 1” NPT (M), 1” NPT (F), 22mm compression fitting PTPB-18-10 PTPB-24-10 10 bar Available in the following sizes 1” BSP (M), 1” BSP (F), ¾” BSP (M), 1” NPT (M), 1” NPT (F), 22mm compression fitting MTPE-18-10 MTPE-24-10 10 bar Available in the follwoiing sizes 1” BSP (M), 1” BSP (F), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1” NPT (F), ¼” NPT (M), 22mm compression fitting MTMA-2-16 16 bar Available in the following sizes 1” BSP (M), 1” BSP (F), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1” NPT (F), ¼” NPT (M), 22mm compression fitting MTMA-60-16 MTMA-80-16 MTMA-100-16 16 bar Available in thre following sizes 1” BSP (M), 1” BSP (F), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1” NPT (F), ¼” NPT (M) MTMB-2-16 MTMB-4-16 MTMB-8-16 MTMB-12-16 MTMB-18-16 MTMB-24-16 MTMB-35-16 16 bar Available in the follow9ng sizes 1” BSP (M), 1” BSP (F), ¾” BSP (M), 1” NPT (M), 1” NPT (F), 22mm compression fitting STMB-8-16 STMB-18-16 STMB-24-16 16 bar Available in the following sizes 1” BSP (M), 1” BSP (F), 1” NPT (M), 1” NPT (F), 22mm compression fitting MTUB-8-25 MTUB-24-25 25 bar Available in the following sizes 1” BSP (M), 1” BSP (F), ¾” BSP (M), 1” NPT (M), 1” NPT (F), 22mm compression fitting MTUA-100-25 25 bar Available in the following sizes 1” BSP (M), 1” BSP (F), ½” BSP (M), ¾” BSP (M), 1” NPT (M), 1” NPT (F), ¼” NPT (M), HTSA-0.16-10 10 bar Available in the following sizes ¼” BSP (M), ½” BSP (M), ¼” NPT (M), ½” NPT (M), ½” PF (BSPP) (M). HTSC-0.3-10 HTSC-0.6-10 HTSD-0.3-10 HTSG-0.3-10 10 bar Available in the following sizes 1¼” BSP (M), 1” BSP (M), ½” BSP (M), ¼” BSP (M), HTSC-0.5-10 HTSD-0.5-10 10 bar Available in the following sizes ½” BSP (M), ¼” BSP (M) HTSH-0.6-10 10 bar Available in the following sizes 1¼” BSPP (M), HTSB-1-10 HTSP-1-10 10 bar Available in the following sizes 1/2” BSP (M) HTSC-1-10 10 bar Available in the following sizes 1” quick 1/2” BSP (M) HTTA-2-10 HTTD-2-10 10 bar Available in the following sizes ¾” quick connect HTTM-2-12 12 bar Available in the following sizes ¾” quick connect

Approval Holder:: Global Water Solutions Ltd.

Company Name
Global Water Solutions Ltd.
Address
5th Floor, 37 Esplanade, St. Helier Jersey The Channel Islands
Postcode
JE1 2TR
Country
United Kingdom
Phone
+886 4 2622 0078
General Email
adam@globalwatersolutions.com

View All Listings by this Company

WRAS Approval Number: #251206001

‘EPS’, ‘EPT & ‘EPL’ ranges of PPSU press fittings (TH press profile) with EPDM ‘O’-rings for use with ‘EFIELD EA’ PE-Xb/AL/PE-Xb multilayer pipes. Maximum working pressure: 10 bar. Maximum operating temperature: 95°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251206001
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Press connections - 16mm, 20mm, 25mm, 26mm & 32mm. Threaded Connections - ½”, ¾” & 1” BSP.
Marking:: EFIELD, pipe outer diameter X wall thickness, on crimp sleeve. EFIELD; size (outer diameter x wall thickness); date of manufacture and time (YYYYMMDDHHMMSS) & line no on pipe
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: Model: “EA” PE-Xb/AL/PE-Xb multilayer pipes: EA16, EA20, EA25, EA26, EA32. Male straight unions: EPS2002, EPS2003, EPS2007, EPS2008, EPS2009, EPS2013. Female straight unions: EPS3003B, EPS3004B, EPS3005B, EPS3006B, EPS3010B, EPS3001, EPS3002, EPS3004, EPS3005, EPS3006 Female elbow with plate: EPL4001. Female elbow EPL3001, EPL3002, EPL3004. Male elbow EPL2001. Equal elbow EPL0001, EPL0002, EPL0003, EPL0004, EPL0005. Equal straight union EPS0001, EPS0002, EPS0003, EPS0004, EPS0005. Reduced straight union EPS1001, EPS1003, EPS1005 Equal tee EPT0001, EPT0002, EPT0003, EPT0004, EPT0005. Reduced tee EPT1002, EPT1003, EPT1004, EPT1009, EPT1016, EPT1011, EPT1020, EPT1012, EPT1021.

Approval Holder:: Shandong EFIELD Piping System Co., Ltd.

Company Name
Shandong EFIELD Piping System Co., Ltd.
Address
No.2369 Yikang Road South Section, Economic Development Zone, Tengzhou City, Zaozhuang City, Shandong
Country
China
Phone
+86-632-5990659
General Email
William.wang@efieldgroup.com

View All Listings by this Company

WRAS Approval Number: #251206002

Range of press fittings (brass bodies) with stainless steel press (‘TH’ profile) collars and EPDM o-rings for use with ‘EA’ PE-Xb/AL/PE-Xb’ multilayer pipe (for press fitting connections) or copper pipe manufactured to EN1057 (compression connections). Maximum working pressure: 10 bar. Maximum operating temperature: 95 °C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251206002
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 16mm, 20mm, 25mm, 26mm & 32mm.
Marking:: Fittings: EFIELD, pipe outer diameter X wall thickness, on crimp sleeve. Pipe: EFIELD; size (outer diameter x wall thickness); date of manufacture and time (YYYYMMDDHHMMSS) & line no.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: “EA” PE-Xb/AL/PE-Xb multilayer pipes: EA16, EA20, EA25, EA26, EA32 Equal straight union EBS0001 EBS0002 EBS0003 EBS0004 EBS0005 Unequal straight union EBS1001 EBS1002 EBS1003 EBS1004 EBS1005 EBS1006 EBS1007 EBS1008 EBS1009 Male straight union EBS2001 EBS2002 EBS2003 EBS2004 EBS2005 EBS2006 EBS2007 EBS2008 EBS2009 EBS2010 EBS2011 EBS2012 EBS2013 Female straight union EBS3001 EBS3002 EBS3003 EBS3004 EBS3005 EBS3006 EBS3007 EBS3008 EBS3009 EBS3010 Female swivel straight union EBS4001 EBS4002 EBS4003 EBS4004 EBS4005 EBS4006 EBS4007 EBS4008 EBS4009 EBS4010 Equal elbow EBL0001 EBL0002 EBL0003 EBL0004 EBL0005 45° elbow EBL1001 EBL1002 EBL1003 EBL1004 EBL1005 Male elbow EBL2001 EBL2002 EBL2003 EBL2004 EBL2005 EBL2006 EBL2007 EBL2008 EBL2009 EBL2010 EBL2011 Female elbow EBL3001 EBL3002 EBL3003 EBL3004 EBL3005 EBL3006 EBL3007 EBL3008 Female plated elbow EBL4001 EBL4002 EBL4003 EBL4004 EBL4005 Female swivel elbow EBL5001 EBL5002 EBL5003 EBL5004 EBL5005 EBL5006 EBL5007 EBL5008 EBL5009 Equal tee EBT0001 EBT0002 EBT0003 EBT0004 EBT0005 Unequal tee EBT1001 EBT1002 EBT1003 EBT1004 EBT1005 EBT1006 EBT1007 EBT1008 EBT1009 EBT1010 EBT1011 EBT1012 EBT1013 EBT1014 EBT1015 EBT1016 EBT1017 EBT1018 EBT1019 EBT1020 EBT1021 EBT1022 EBT1023 EBT1024 EBT1025 EBT1026 EBT1027 EBT1028 EBT1029 EBT1030 EBT1031 EBT1032 EBT1033 EBT1034 EBT1035 EBT1036 EBT1037 EBT1038 EBT1039 EBT1040 Female tee EBT2001 EBT2002 EBT2003 EBT2004 EBT2005 EBT2006 EBT2007 EBT2008 EBT2009 EBT2010 EBT2011 EBT2012 End cap EBD0001 EBD0002 EBD0003 EBD0004 EBD0005 Radiator elbow - long 300 mm EBL6001 Compression x press straight union EBS5001 EBS5002 EBS5003 EBS5004 EBS5005 EBS5006 EBS5007 EBS5008 EBS5009 EBS6001 EBS6002 EBS6003 EBS6004 EBS6005 EBS6006 EBS6007 EBS6008 EBS6009 EBS6010 EBS6011 EBS6012 EBS6013 EBS6014 EBS6015 EBS6016 EBS6017 EBS6018 EBS6019 EBS6020 EBS6021 EBS6022 EBS6023 Compression x press elbow EBL8001 EBL8002 EBL9001 EBL9002 Welded x press straight union EBS7001 EBS7002 EBS7003 EBS7004 EBS7005 EBS7006 EBS7007 EBS7008 EBS8001 EBS8002 EBS8003 EBS8004 EBS8005 EBS8006 EBS8007 EBS8008 Shower bracket - 150 mm EBL7001 Female swivel straight union adaptor EBS9001 EBS9002

Approval Holder:: Shandong EFIELD Piping System Co., Ltd.

Company Name
Shandong EFIELD Piping System Co., Ltd.
Address
No.2369 Yikang Road South Section, Economic Development Zone, Tengzhou City, Zaozhuang City, Shandong
Country
China
Phone
+86-632-5990659
General Email
William.wang@efieldgroup.com

View All Listings by this Company

WRAS Approval Number: #2303411

Flowflex Range of press-fit fittings with stainless steel bodies incorporating EPDM ‘O’-rings for use with SS316L pipes. Maximum working pressure 16 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2303411
Size:: see model
Marking:: Flowflex logo, WRAS, Size of fitting.
Installation Requirements:: R001
Expiry date:: 31/03/2028
Model:: STRAIGHT COUPLING SS6270M.15B SS6270M.18B SS6270M.22B SS6270M.28B SS6270M.35B SS6270M.42B SS6270M.54B SS6270M.67B SS6270M.76B SS6270M.89B SS6270M.108B SLIP COUPLING SS6270SM.15B SS6270SM.18B SS6270SM.22B SS6270SM.28B SS6270SM.35B SS6270SM.42B SS6270SM.54B SS6270SM.67B SS6270SM.76B SS6270SM.89B SS6270SM.108B 90 DEGREE EQUAL ELBOW SS6090M.15B SS6090M.18B SS6090M.22B SS6090M.28B SS6090M.35B SS6090M.42B SS6090M.54B SS6090M.67B SS6090M.76B SS6090M.89B SS6090M.108B 90 DEGREE STREET ELBOW SS6092M.15B SS6092M.18B SS6092M.22B SS6092M.28B SS6092M.35B SS6092M.42B SS6092M.54B SS6092M.67B SS6092M.76B SS6092M.89B SS6092M.108B 45 DEGREE EQUAL ELBOW SS6041M.15B SS6041M.18B SS6041M.22B SS6041M.28B SS6041M.35B SS6041M.42B SS6041M.54B SS6041M.67B SS6041M.76B SS6041M.89B SS6041M.108B 45 DEGREE STREET ELBOW SS6040M.15B SS6040M.18B SS6040M.22B SS6040M.28B SS6040M.35B SS6040M.42B SS6040M.54B SS6040M.67B SS6040M.76B SS6040M.89B SS6040M.108B EQUAL TEE SS6130M.15B SS6130M.18B SS6130M.22B SS6130M.28B SS6130M.35B SS6130M.42B SS6130M.54B SS6130M.67B SS6130M.76B SS6130M.89B SS6130M.108B REDUCING TEE SS6130RM.181518B SS6130RM.221522B SS6130RM.221822B SS6130RM.281528B SS6130RM.281828B SS6130RM.282228B SS6130RM.351535B SS6130RM.351835B SS6130RM.352235B SS6130RM.352835B SS6130RM.421542B SS6130RM.421842B SS6130RM.422242B SS6130RM.422842B SS6130RM.423542B SS6130RM.541554B SS6130RM.541854B SS6130RM.542254B SS6130RM.542854B SS6130RM.543554B SS6130RM.544254B SS6130RM.672867B SS6130RM.673567B SS6130RM.674267B SS6130RM.675467B SS6130RM.762276B SS6130RM.762876B SS6130RM.763576B SS6130RM.764276B SS6130RM.765476B SS6130RM.892289B SS6130RM.892889B SS6130RM.893589B SS6130RM.895489B SS6130RM.895489B SS6130RM.897689B SS6130RM.10822108B SS6130RM.10828108B SS6130RM.10835108B SS6130RM.10842108B SS6130RM.10854108B SS6130RM.10876108B SS6130RM.10889108B STOP END SS6301M.15B SS6301M.18B SS6301M.22B SS6301M.28B SS6301M.35B SS6301M.42B SS6301M.54B SS6301M.67B SS6301M.76B SS6301M.89B SS6301M.108B FULL CROSSOVER SS6085M.15B SS6085M.18B SS6085M.22B SS6085M.28B PART CORSSOVER SS6086M.15B SS6086M.18B SS6086M.22B SS6086M.28B FLANGE SSFLM.15B SSFLM.18B SSFLM.22B SSFLM.28B SSFLM.35B SSFLM.42B SSFLM.54B SSFLM.67B SSFLM.76B SSFLM.89B SSFLM.108B REDUCED COUPLING SS6240M.1815B SS6240M.2215B SS6240M.2218B SS6240M.2815B SS6240M.2818B SS6240M.2822B SS6240M.3515B SS6240M.3518B SS6240M.3522B SS6240M.3528B SS6240M.4215B SS6240M.4218B SS6240M.4222B SS6240M.4228B SS6240M.4235B SS6240M.5415B SS6240M.5418B SS6240M.5422B SS6240M.5428B SS6240M.5435B SS6240M.5442B SS6240M.6728B SS6240M.6735B SS6240M.6742B SS6240M.6754B SS6240M.7654B SS6240M.8954B SS6240M.8976B SS6240M.10854B SS6240M.10876B SS6240M.10888B FITTING REDUCER SS6243M.1815B SS6243M.2215B SS6243M.2218B SS6243M.2815B SS6243M.2818B SS6243M.2822B SS6243M.3515B SS6243M.3518B SS6243M.3522B SS6243M.3528B SS6243M.4215B SS6243M.4218B SS6243M.4222B SS6243M.4228B SS6243M.4235B SS6243M.5415B SS6243M.5418B SS6243M.5422B SS6243M.5428B SS6243M.5435B SS6243M.5442B SS6243M.6728B SS6243M.6735B SS6243M.6742B SS6243M.6754B SS6243M.7642B SS6243M.7654B SS6243M.8954B SS6243M.8976B SS6243M.10854B SS6243M.10876B SS6243M.10888B C X MI COUPLING SS6243M.15X1/2B SS6243M.18X1/2B SS6243M.18X3/4B SS6243M.22X1/2B SS6243M.22X3/4B SS6243M.28X3/4B SS6243M.28X1B SS6243M.35X1B SS6243M.35X1.1/4B SS6243M.42X1.1/4B SS6243M.42X1.1/2B SS6243M.54X1.1/2B SS6243M.54X2B SS6243M.67X2B SS6243M.76X2.1/2B SS6243M.89X3B C X FI COUPLING SS6270M.15X1/2B SS6270M.18X1/2B SS6270M.18X3/4B SS6270M.22X1/2B SS6270M.22X3/4B SS6270M.28X3/4B SS6270M.28X1B SS6270M.35X1B SS6270M.35X1.1/4B SS6270M.42X1.1.4B SS6270M.42X1.1/2B SS6270M.54X2B SS6270M.54X2B SWIVEL COUPLING SS6240M.15X1/2B SS6240M.18X1/2B SS6240M.22X3/4B SS6240M.28X1B SS6240M.35X1.1/4B SS6240M.42X1.1/4B SS6240M.54X2B C X C X MI TEE SS6130MMI.15x1/2x15B SS6130MMI.18X1/2X18B SS6130MMI.18X3/4X18B SS6130MMI.22X1/2X22B SS6130MMI.22X3/4X22B SS6130MMI.28X1/2X28B SS6130MMI.28X3/4X28B SS6130MMI.28X1X28B SS6130MMI.35X3/4X35B SS6130MMI.35X1.1/4X35B SS6130MMI.42X3/4X42B SS6130MMI.42X1.1/2X42B SS6130MMI.54X3/4X54B SS6130MMI.54X2X54B C X C X FI TEE SS6130MFI.15x1/2x15B SS6130MFI.18X1/2X18B SS6130MFI.18X3/4X18B SS6130MFI.22X1/2X22B SS6130MFI.22X3/4X22B SS6130MFI.28X1/2X28B SS6130MFI.28X3/4X28B SS6130MFI.28X1X28B SS6130MFI.35X1/2X35B SS6130MFI.42X1/2X42B SS6130MFI.54X1/2X54B SS6130MFI.54X3/4X54B SS6130MFI.54X2X54B SS6130MFI.67X3/4X67B SS6130MFI.67X2X67B SS6130MFI.76X3/4X76B SS6130MFI.76X2X76B SS6130MFI.89X3/4X89B SS6130MFI.108X3/4X108B SS6130MFI.108X3/4X108B SS6130MFI.108X2X108B C X MI 90D ELBOW SS6092M.15x1/2B SS6092M.18X1/2B SS6092M.22X3/4B SS6092M.28X1B SS6092M.35X1.1/4B SS6092M.42x1.1/2B SS6092M.54X1.1/2B SS6092M.54X2B C X FI 90D ELBOW SS6090M.15x1/2B SS6090M.18X1/2B SS6090M.22X3/4B SS6090M.28X1B SS6090M.35X1.1/4B SS6090M.42X1.1/2B SS6090M.54X2B C X MI 90D SHORT ELBOW SS6092MSE.15x1/2B SS6092MSE.18X1/2B SS6092MSE.22X3/4B SS6092MSE.28X1B SS6092MSE.35X1.1/4B SS6092MSE.42X1.1/2B SS6092MSE.54X2B C X FI 90D SHORT ELBOW SS6090MSE.15x1/2B SS6090MSE.18X1/2B SS6090MSE.22X1/2B SS6090MSE.22X3/4B SS6090MSE.28X1B SS6090MSE.35X1.1/4B CXFI 90D WALLPLATE ELBOW SS6472M.15X1/2B SS6472M.15X1/2B SS6472M.22X3/4B SS6472M.28X1B SS6472M.35X1.1/4B

Approval Holder:: Flowflex Components Ltd.

Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Country
United Kingdom
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company

WRAS Approval Number: #251215004

Range of copper or chrome plated copper (CP suffix models) press fittings with EPDM ‘O’-rings for use with copper pipe (manufactured to EN1057). Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressures: 12mm to 54mm: 16.0 bar, 66.7mm to 108mm: 10.0 bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251215004
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: Taizhou Double Winners Copper Co., Ltd logo (dbw in a box) and size on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: 6001 & 6001CP Bend 90° x press 12 x 12 15 x 15 18 x 18 22 x 22 28 x 28 35 x 35 42 x 42 54 x 54 66.7 x 66.7 76.1 x 76.1 108 x 108 6002 & 6002CP Bend 90° press x press 12 x 12 15 x 15 18 x 18 22 x 22 28 x 28 35 x 35 42 x 42 54 x 54 66.7 x 66.7 76.1 x 76.1 108 x 108 6040 & 6040CP Bend 45° x press 12 x 12 15 x 15 18 x 18 22 x 22 28 x 28 35 x 35 42 x 42 54 x 54 66.7 x 66.7 76.1 x 76.1 108 x 108 6041 & 6041CP Bend 45° press x press 12 x 12 15 x 15 18 x 18 22 x 22 28 x 28 35 x 35 42 x 42 54 x 54 66.7 x 66.7 76.1 x 76.1 108 x 108 6085 & 6085CP Full Crossover 15 x 15 22 x 22 6086 & 6086CP Partial Crossover 15 x 15 22 x 22 6130 & 6130CP Equal Tee 3 x press 12 x 12 x 12 15 x 15 x 15 18 x 18 x 18 22 x 22 x 22 28 x 28 x 28 35 x 35 x 35 42 x 42 x 42 54 x 54 x 54 66.7 x 66.7 x 66.7 76.1 x 76.1 x 76.1 108 x 108 x 108 6131 & 6131CP Reducing Tee 3 x press 15 x 15 x 12 15 x 12 x 15 15 x 12 x 12 18 x 18 x 12 18 x 18 x 15 18 x 15 x 12 18 x 15 x 15 22 x 22 x 15 22 x 22 x 18 22 x 15 x 22 22 x 18 x 22 22 x 18 x 15 22 x 15 x 18 22 x 15 x 15 22 x 18 x 18 28 x 28 x 15 28 x 28 x 18 28 x 28 x 22 28 x 15 x 28 28 x 18 x 28 28 x 22 x 28 28 x 22 x 15 28 x 15 x 22 28 x 15 x 15 28 x 22 x 22 35 x 35 x 15 35 x 35 x 18 35 x 35 x 22 35 x 35 x 28 35 x 15 x 35 35 x 18 x 35 35 x 22 x 35 35 x 28 x 35 35 x 22 x 15 35 x 22 x 22 35 x 15 x 15 35 x 28 x 22 35 x 28 x 28 35 x 28 x 15 42 x 42 x 15 42 x 42 x 18 42 x 42 x 22 42 x 42 x 28 42 x 42 x 35 42 x 15 x 42 42 x 18 x 42 42 x 22 x 42 42 x 28 x 42 42 x 35 x 42 42 x 22 x 15 42 x 28 x 22 42 x 35 x 28 42 x 15 x 15 42 x 22 x 22 42 x 28 x 28 42 x 35 x 35 54 x 54 x 15 54 x 54 x 18 54 x 54 x 22 54 x 54 x 28 54 x 54 x 35 54 x 54 x 42 54 x 15 x 54 54 x 18 x 54 54 x 22 x 54 54 x 28 x 54 54 x 35 x 54 54 x 42 x 54 54 x 22 x 15 54 x 28 x 22 54 x 35 x 22 54 x 35 x 28 54 x 42 x 22 54 x 42 x 28 54 x 42 x 35 54 x 15 x 15 54 x 22 x 22 54 x 28 x 28 54 x 35 x 35 54 x 42 x 42 66.7 x 28 x 66.7 66.7 x 35 x 66.7 66.7 x 42 x 66.7 66.7 x 54 x 66.7 76.1 x 35 x 76.1 76.1 x 42 x 76.1 76.1 x 54 x 76.1 76.1 x 66.7 x 76.1 108 x 66.7 x 108 108 x 76.1 x 108 6240 & 6240CP Reducer press x press 15 x 12 18 x 12 18 x 15 22 x 15 22 x 18 28 x 15 28 x 18 28 x 22 35 x 15 35 x 18 35 x 22 35 x 28 42 x 15 42 x 18 42 x 22 42 x 28 42 x 35 54 x 15 54 x 18 54 x 22 54 x 28 54 x 35 54 x 42 6243 & 6243CP Reducer x press 15 x 12 18 x 12 18 x 15 22 x 15 22 x 18 28 x 15 28 x 18 28 x 22 35 x 15 35 x 18 35 x 22 35 x 28 42 x 15 42 x 18 42 x 22 42 x 28 42 x 35 54 x 15 54 x 18 54 x 22 54 x 28 54 x 35 54 x 42 66.7 x 28 66.7 x 35 66.7 x 42 66.7 x 54 76.1 x 35 76.1 x 42 76.1 x 54 76.1 x 66.7 108 x 54 108 x 66.7 108 x 76.1 108 x 88.9 6270 & 6270CP Copper Press Coupling 12 x 12 15 x 15 18 x 18 22 x 22 28 x 28 35 x 35 42 x 42 54 x 54 66.7 x 66.7 76.1 x 76.1 108 x 108 6271 & 6271CP Copper Press Coupling 12 x 12 15 x 15 18 x 18 22 x 22 28 x 28 35 x 35 42 x 42 54 x 54 6301 & 6301CP Endcap press 12 15 18 22 28 35 42 54 66.7 76.1 108 6510 & 6510CP Flange 76.1

Approval Holder:: Taizhou Double Winners Copper Co., Ltd

Company Name
Taizhou Double Winners Copper Co., Ltd
Address
Room 902, No.185-1 Wenxue Road, Jiazhi Street, Jiaojiang, Taizhou, Zhejiang
Postcode
31800
Country
China
General Email
info@double‐winners.com

View All Listings by this Company

WRAS Approval Number: #251215007

Range of copper or brass press fittings with EPDM ‘O’-rings for use with copper pipe (manufactured to EN1057). Jointing is achieved via a crimping tool using a ‘V’ profile. For above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251215007
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: South Coast Sales logo and WRAS on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: SCP10001 Copper Press Straight Coupler 1/2" (14.7mm) SCP10002 Copper Press Straight Coupler 3/4" (21mm) SCP10003 Copper Press Straight Coupler 1" (27.4mm) SCP10021 Copper Press Red Coupler 3/4"*1/2" (21mm x 14.7mm) SCP10031 Copper Press Red Coupler 1"*1/2" (27.4mm x 14.7mm) SCP10032 Copper Press Red Coupler 1"*3/4" (27.4mm x 21mm) SCP15001 Copper Press Elbow 1/2" (14.7mm) SCP15002 Copper Press Elbow 3/4" (21mm) SCP15003 Copper Press Elbow 1" (27.4mm) SCP15021 Copper Press Elbow 3/4"*1/2" (21mm x 14.7mm) SCP15031 Copper Press Elbow 1"*1/2" (27.4mm x 14.7mm) SCP15032 Copper Press Elbow 1"*3/4" (27.4mm x 21mm) SCP45001 Copper Press Obtuse Bend 1/2" (14.7mm) SCP45002 Copper Press Obtuse Bend 3/4" (21mm) SCP45003 Copper Press Obtuse Bend 1" (27.4mm) SCP35001 Copper Press Street Elbow 1/2" (14.7mm) SCP35002 Copper Press Street Elbow 3/4" (21mm) SCP35003 Copper Press Street Elbow 1" (27.4mm) SCP25001 Copper Press Obtuse Street Elbow 1/2" (14.7mm) SCP25002 Copper Press Obtuse Street Elbow 3/4" (21mm) SCP25003 Copper Press Obtuse Street Elbow 1" (27.4mm) SCP18001 Copper Press Tee 1/2" (14.7mm) SCP18002 Copper Press Tee 3/4" (21mm) SCP18003 Copper Press Tee 1" (27.4mm) SCP18112 Copper Press Tee 1/2"*1/2"*3/4" (14.7mm x 14.7mm x 21mm) SCP18211 Copper Press Tee 3/4"*1/2"*1/2" (21mm x 14.7mm x 14.7mm) SCP18212 Copper Press Tee 3/4"*1/2"*3/4" (21mm x 14.7mm x 21mm) SCP18221 Copper Press Tee 3/4"*3/4"*1/2" (21mm x 21mm x 14.7mm) SCP18223 Copper Press Tee 3/4"*3/4"*1" (21mm x 21mm x 27.4mm) SCP18311 Copper Press Tee 1"*1/2"*1/2" (27.4mm x 14.7mm x 14.7mm) SCP18312 Copper Press Tee 1"*1/2"*3/4" (27.4mm x 14.7mm x 21mm) SCP18313 Copper Press Tee 1"*1/2"*1" (27.4mm x 14.7mm x 27.4mm) SCP18321 Copper Press Tee 1"*3/4"*1/2" (27.4mm x 21mm x 14.7mm) SCP18322 Copper Press Tee 1"*3/4"*3/4" (27.4mm x 21mm x 21mm) SCP18323 Copper Press Tee 1"*3/4"*1" (27.4mm x 21mm x 27.4mm) SCP18331 Copper Press Tee 1"*1"*1/2" (27.4mm x 27.4mm x 14.7mm) SCP18332 Copper Press Tee 1"*1"*3/4" (27.4mm x 27.4mm x 21mm) SCP19021 Copper Press Fitting Reducer 3/4"*1/2" (14.7mm) SCP19031 Copper Press Fitting Reducer 1"*1/2" (14.7mm ) SCP19032 Copper Press Fitting Reducer 1"*3/4" (21mm ) SCP100S1 Copper Press Slip Coupler 1/2" (14.7mm) SCP100S2 Copper Press Slip Coupler 3/4" (21mm) SCP100S3 Copper Press Slip Coupler 1" (27.4mm) SCP11001 Brass Press Straight Coupler MI*1/2" Press (1/2” BSP (M) x 14.7mm) SCP11002 Brass Press Straight Coupler MI*3/4" Press (3/4” BSP (M) x 21mm) SCP11003 Brass Press Straight Coupler MI*1" Press (1” BSP (M) x 27.4mm) SCP12001 Brass Press Straight Coupler FI*1/2" Press (1/2” BSP (F) x 14.7mm) SCP12002 Brass Press Straight Coupler FI*3/4" Press (3/4” BSP (F) x 21mm) SCP12003 Brass Press Straight Coupler FI*1" Press (1” BSP (F) x 27.4mm) SCP51001 Copper Press Stop End 1/2" (14.7mm) SCP51002 Copper Press Stop End 3/4" (21mm) SCP51003 Copper Press Stop End 1" (27.4mm) SCP19001 Brass Press 1/2" 317W Wallplate Elbow (14.7mm) SCP19002 Brass Press 3/4" 317W Wallplate Elbow (21mm) SCP14001 Copper Press 1/2"*1/2" Straight Swivel Connector (14.7mm x 1/2” BSP (F)) SCP13001 Copper Press 1/2"*1/2" Bent Swivel Connector (14.7mm x 1/2” BSP (F)) SCP14002 Copper Press 3/4"*3/4" Straight Swivel Connector (21mm x 3/4” BSP (F)) SCP13002 Copper Press 3/4"*3/4" Bent Swivel Connector (21mm x 3/4” BSP (F))

Approval Holder:: South Coast Sales

Company Name
South Coast Sales
Address
1 Doughcloyne Industrial Estate, Sarsfield Road, Wilton, Cork.
Postcode
T12 TR62
Country
Ireland
Phone
00353 21 - 43 46 143
General Email
info@southcoastsales.com

View All Listings by this Company

WRAS Approval Number: #251204705

Range of domestic stainless steel indirect unvented hot water storage cylinders, incorporating a stainless-steel coil for connection to external heating resource. The secondary circuit is factory fitted with a temperature and pressure relief valve (7.0 Bar @90°C) and an immersion heater. Primary working pressure: 3 bar; secondary working pressure: 5.5 bar. Maximum operating temperature 90 °C.

Section:: 1465 Heaters
Section Subtitle:: Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:: 251204705
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” BSP (F).
Marking:: Midea, model & tech info including pressure and capacity on adhesive label on body.
Installation Requirements:: R001 R140
Expiry date:: 31/12/2030
Model:: MT-S190W 180 litre water storage tank without electric heating MT-S190WE15 180 litre, 1500 watt electric water storage tank MT-S190WE30 180 litre, 3000 watt electric water storage tank MT-S270W 250 litre water storage tank without electric heating MT-S270WE15 250 litre, 1500 watt electric water storage tank MT-S270WE30 250 litre, 3000 watt electric water storage tank model codes: MT: Midea Tank S：Stainless W：Water cycle heater E：Electrical 190/270: water tank volume 190: 180 litre 270: 250 litre 15/30: the wattage of electricity 15: 1500W 30: 3000W

Approval Holder:: GD Midea Heating & Ventilating Equipment Co., Ltd.

Company Name
GD Midea Heating & Ventilating Equipment Co., Ltd.
Address
Penglai Industry Road Beijiao, Shunde, Foshan, Guangdong
Postcode
528311
Country
China
Phone
+86 13902810522
General Email
genrong.li@midea.com

View All Listings by this Company

WRAS Approval Number: #260104008

Range of flow sensors with brass bodies (various grades - see model). Maximum working pressure 16.0 bar. Maximum operating temperature 90°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” BSP (M). Internal turbine: 19.54mm O.D
Marking:: With body: SIKA Systemtechnik GmbH logo (SIKA) and address, PN, Part No., CE and batch code (WW YY) on adhesive label on cable. Flow arrow on body. Internal turbine without body: Serial No., SIKA Systemtechnik GmbH logo (SIKA) and batch code (WW YY) on body.
Installation Requirements:: R001
Expiry date:: 31/01/2031
Model:: Flow sensors type series VTY15: VY1545abcdefgh & VY1545MAHNefA4 Where: ab = body material (MA = Brass CW617N-DW, MC = Brass CW510L, MK = Brass CW724R, K5 = without body, only the internal turbine system) cd = sensor and signal output (HN = Hall sensor-NPN, 00 = without sensor) ef = electrical cable connection (various - in combination can be 00…99 or AA…ZZ, examples 05 = 500mm, 12=1200mm, X1=80mm with Molex plug connector) gh = process connection (A4 = G3/4 male thread, YY = without, only possible with ab = K5) VY1545abyyyyyzz Where: ab = body material (MA = Brass CW617N-DW, MC = Brass CW510L, MK = Brass CW724R, K5 = without body, only the internal turbine system) yyyyy = name of customer (5 digits, e.g. SCHMI, MUELL, …) zz = consecutive number (2 digits, 01…99) & Internal turbine only: VY1545K50000YY

Approval Holder:: SIKA Systemtechnik GmbH

Company Name
SIKA Systemtechnik GmbH
Address
Struthweg 7-9 Kaufungen
Postcode
34260
Country
Germany
Phone
+49 5605 803 652
General Email
grass@sika.net

View All Listings by this Company
Manufacturer:: SIKA Systemtechnik GmbH

Company Name
SIKA Systemtechnik GmbH
Address
Struthweg 7-9 Kaufungen
Postcode
34260
Country
Germany
Phone
+49 5605 803 652
General Email
grass@sika.net

View All Listings by this Company

WRAS Approval Number: #251204708

Flow sensor with a plastic body.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” BSP.
Marking:: Waterguard and model on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: WM-FSX-049

Approval Holder:: Waterguard Services Ltd.

Company Name
Waterguard Services Ltd.
Address
22 Oakwell Business Centre Barnsley
Postcode
S71 1HX
Country
United Kingdom
Phone
01226 244200
General Email
claire.mason@waterguard.co.uk

View All Listings by this Company

WRAS Approval Number: #251212023

Individual threaded fitting with SUS316L body. Maximum working pressure: 6 bar Maximum operating temperature 90°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” BSP (F).
Marking:: Solaire on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: MT-FT-1 Joint Pipe.

Approval Holder:: Solaire IOM Limited

Company Name
Solaire IOM Limited
Address
Ballacrammag 8 Westhill Village Ramsey Isle of Man
Postcode
IM8 3TD
Phone
07775 898965

View All Listings by this Company

WRAS Approval Number: #251102725

Range of multistage pumps with stainless steel bodies Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 251102725
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: SPRING60 XM & 90 XM: 1” BSP (F) inlet x 1” BSP (F) outlet. SPRING120 XM: 1¼” BSP (F) inlet x 1” BSP (F) outlet.
Marking:: Stream, model code and other technical information on label on body.
Installation Requirements:: R001 R415
Expiry date:: 30/11/2030
Model:: SPRING60 2M, SPRING60 3M, SPRING60 4M, SPRING60 5M, SPRING90 2M, SPRING90 3M, SPRING90 4M, SPRING90 5M, SPRING120 2M, SPRING120 3M, SPRING120 4M & SPRING120 5M.

Approval Holder:: Tianjin Steampumps Industry Co., Ltd

Company Name
Tianjin Steampumps Industry Co., Ltd
Address
4th Floor Haijing Plaza No. 118 Taierzhuang Nan Road Hexi District Tianjin
Country
China
General Email
angela.zhang@steampumps.com

View All Listings by this Company

WRAS Approval Number: #251202728

Range of electric water pumps, with stainless steel bodies, shaft and either stainless steel or plastic impellors. Maximum working pressure 8.5 Bar. Maximum operating temperature: See models.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 251202728
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1” BSP (F)
Marking:: Felsom, model and technical data on data plate on body
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: U 3A-90/4; U 3A-100/5 - 35 °C U 3A-90/4 T; U 3A-100/5 T - 35 °C U 5A-120/4 ; U 5A-150/5 - 35 °C U 5A-120/4 T; U 5A-150/5 T - 35 °C U 3SA-90/4; U 3SA-100/5 - 80 °C U 5SA-120/4; U 5SA-150/5 - 80 °C U 3SA-90/4 T; U 3SA-100/5 T - 80 °C U 5SA-120/4 T; U 5SA-150/5 T - 80 °C

Product Images

Approval Holder:: Exa Pumps SrL

Company Name
Exa Pumps SrL
Address
Via Tre Confini, 23 22010 Gera Lario CO
Country
Italy
Phone
0039 0344 910054
General Email
infor@exapumps.com

View All Listings by this Company

WRAS Approval Number: #251202304

Section:: 1650 Shower Outlets
Description:: A Range of Shower head(s) and/or shower handset(s).
Undefinable Air Gap – See IRN’s
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R040
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
37902W-MB5	BLACK	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Handset,
37902W-MG5	GREEN	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Handset,
37902W-GB5	BLUE	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Handset,
37902W-CS5	GREY	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Handset,
37902W-BP5	PINK	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Handset,
37903W-MB5	BLACK	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Fixed Head,
37903W-MG5	GREEN	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Fixed Head,
37903W-GB5	BLUE	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Fixed Head,
37903W-CS5	GREY	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Fixed Head,
37903W-BP5	PINK	½” BSP	OPEN OUTLET bar	60°C °C	MIRA SHOWERS	SPRAY PLATE	No	Not applicable	Not Applicable	Open Outlet	Fixed Head,

Approval Holder:: Kohler Mira Ltd.

Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

WRAS Approval Number: #251212303

Section:: 1650 Shower Outlets
Description:: A Range of Shower head(s) and/or shower handset(s).
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list
WJ V/HANDLE CH	CHROME	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 931 IX	STAINLESS STEEL	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 23931 BBR	BRUSHED BRASS	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 27931 BBL	BRUSHED BLACK	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 28931 MB	MATT BLACK	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 21931 BRZ	BRUSHED BRONZE	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 649510 CH	CHROME	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 639510 BBR	BRUSHED BRASS	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 679510 BBL	BRUSHED BLACK	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 689510 MB	MATT BLACK	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 619510 BRZ	BRUSHED BRONZE	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ GRSH CH	CHROME	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ GRSH G	POLISHED GOLD	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ GRSH NK	NICKEL	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ GRSH BBR	BRUSHED BRASS	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 15930 CH	CHROME	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 23930 BBR	BRUSHED BRASS	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 27930 BBL	BRUSHED BLACK	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 28930 MB	MATT BLACK	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No
WJ 21930 BRZ	BRUSHED BRONZE	1/2BSP(M)	Open Outlet bar	60 °C	ZHONG RUI YI SHENG	on shower body	No

Approval Holder:: Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd

Company Name
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Address
Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave., JiaojiangDistrict, Taizhou City, Zhejiang Province, China.(318000)

View All Listings by this Company
Manufacturers:: ZHEJIANG ZHONG RUI YI SHENG TRADING CO. LTD

WRAS Approval Number: #260116305

Section:: 1650 Shower Outlets
Description:: A Range of Shower head(s) and/or shower handset(s).
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R040
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
21-005-481	Chrome plated	½” BSP (M)	Open outlet use bar	65℃ °C	AKW	on handset body.	No				Handset,
21-005-482	White colour	½” BSP (M)	Open outlet use bar	65℃ °C	AKW	on handset body.	No				Handset,

Approval Holder:: AKW Medi-Care Limited

Company Name
AKW Medi-Care Limited
Address
Pointon Way Hampton Lovett Droitwich Spa
Postcode
WR9 0LW

View All Listings by this Company

WRAS Approval Number: #251215005

Draining tap with a brass body and a rising spindle headwork. Pressfit jointing is achieved via a crimping tool using a ‘V’ profile and is for use with copper pipes (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:: 1770 Taps
Section Subtitle:: Draining, for above ground use only.
WRAS Approval Number:: 251215005
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 14.7mm pressfit x 14mm tail
Marking:: South Coast Sales logo and WRAS on body.
Installation Requirements:: R001 R511
Expiry date:: 31/12/2030
Model:: SCP68001

Approval Holder:: South Coast Sales

Company Name
South Coast Sales
Address
1 Doughcloyne Industrial Estate, Sarsfield Road, Wilton, Cork.
Postcode
T12 TR62
Country
Ireland
Phone
00353 21 - 43 46 143
General Email
info@southcoastsales.com

View All Listings by this Company

WRAS Approval Number: #260102302

Section:: 1820 Taps
Description:: A Range of Self closing tap(s).
Deck mounted Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8" captive nut end connections. Capable of achieving AUK3 Tap Gap
Installation Requirements:: R001 R006 R009
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
794110	Chrome	3/8"	5 bar	60°C °C	DELABIE	On the push button	Yes	Time-flow	Metal Backnuts	Aerator	Flow Regulator Fitted,
794110S	Satine	3/8"	5 bar	60°C °C	DELABIE	On the push button	Yes	Time-flow	Metal Backnuts	Aerator	Flow Regulator Fitted,
794110BK	Black	3/8"	5 bar	60°C °C	DELABIE	On the push button	Yes	Time-flow	Metal Backnuts	Aerator	Flow Regulator Fitted,
794120	Chrome	3/8"	5 bar	60°C °C	DELABIE	On the push button	Yes	Time-flow	Metal Backnuts	Aerator	Flow Regulator Fitted,
794120S	Satine	3/8"	5 bar	60°C °C	DELABIE	On the push button	Yes	Time-flow	Metal Backnuts	Aerator	Flow Regulator Fitted,
794120BK	Black	3/8"	5 bar	60°C °C	DELABIE	On the push button	Yes	Time-flow	Metal Backnuts	Aerator	Flow Regulator Fitted,

Notes & Further Information: S : for satine finish BK : for Black finish

Approval Holder:: Delabie UK Ltd.

Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company
Manufacturers:: Delabie SAS

WRAS Approval Number: #251204020

Range of stainless steel braided silicone lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 251204020
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: Lux, D.o.M. (YY or MMYY, WWYY), PN, DN, temp, WRAS on crimped connector.
Installation Requirements:: R008
Expiry date:: 31/12/2030
Model:: DN6 Male 3/8 BSP Male 3/8 BSP swivel Male 1/2 BSP Male 1/2 NPSM Male M8 cyl. Male M8 cyl. medium Male M8 cyl. long Male M8 hexag. Male M8 hexag.medium Male M10 poly. Male M10. hexag. Male M10. hexag. medium Male M10 hexag. long Male M10 (P.I.) Male M11 Male M15 swivel Female 3/8 BSP Female 3/8 BSP w/gasket (H.N.) Female 3/8 BSP w/gasket Female 1/2 BSP Female 1/2 BSP w/gasket Female 9/16 w/gasket Female M10 Female M15 Female M15 w/gasket Plug in straight Ø10 mm Plug in straight Ø10 mm w/recess Plug in straight w/2 O-rings Plug in straight w/O-ring (F.I.) DN8 Male 3/8 BSP Male 3/8 BSP swivel Male 1/2 BSP Male 1/2 BSP swivel Male 3/4 BSP Male 1/8 NPSM Male M10 poly. Male M10. hexag. Male M10. hexag. medium Male M10 hexag. long Male M10 (H.N.) Male M11 Male M12 Male M12 hexag. medium Male M12 (P.I.) Male M15 swivel Male M10 (C.S.) Female 3/8 BSP Female 3/8 BSP (G.B.) Female 3/8 BSP d.6,6 (G.B.) Female 3/8 BSP w/gasket Female 3/8 BSP w/O-ring (G.B.) Female 3/8 w/O-ring (V.I.) Female (Plastic) 3/8 w/O-ring (V.I.) Female 1/2 BSP Female 1/2 BSP w/gasket Female 1/2 BSP w/O-ring (G.B.) Female 1/2 NPSM Female 3/4 BSP Female 3/4 BSP w/gasket Female 9/16 w/gasket Female M15 Female elbow 3/8 BSP Female elbow 3/8 BSP w/gasket Female elbow 3/8 BSP (G.B.) Female elbow 3/8 BSP H 29,5 mm (G.B.) Female elbow 3/8 BSP H 29,5 mm (V.I.) Female elbow (Plastic) 5/8 w/O-ring (V.I.) Female elbow 1/2 BSP Female elbow 1/2 BSP w/gasket Female elbow 1/4 BSP Female elbow 3/4 BSP Female elbow 3/4 BSP w/gasket Plug in straight Ø10 mm Plug in straight Ø10 mm w/recess Plug in straight w/2 O-rings Compression Ø 10 mm (for use with copper pipe) Compression Ø 15 mm (for use with copper pipe) DN13 Male 1/2 BSP Male 1/2 BSP (H.N.) Male 1/2 BSP (D.B.) Male 1/2 BSP 32 mm (H.N.) Male 1/2 NPT (H.N.) Male 1/2 taper (H.N.) Male 3/4 BSP Female 3/8 BSP Female 1/2 BSP Female 1/2 BSP w/gasket Female 1/2 BSP w/O-ring (G.B.) Female 1/2 BSP w/O-ring (H.N.) Female 3/4 BSP Female 3/4 BSP w/gasket Female 3/4 BSP w/2 O-rings (H.N.) Female elbow 3/8 BSP Female elbow 1/2 BSP Female elbow 1/2 BSP w/gasket Female elbow 1/2 BSP w/O-ring (H.N.) Female elbow 3/4 BSP Female elbow 3/4 BSP w/gasket Female elbow 3/4 BSP w/2 O-rings (H.N.) Plug in straight Ø15 mm (A.T.) Plug in straight plug-in (A.T.) Plug in straight plug-in w/o-ring (A.T.) Plug in elbow pipe w/2 O-rings (A.T.) Compression Ø 15 mm (for use with copper pipe) DN18 Male 3/4 BSP Male 1" BSP Female 3/4 BSP Female 1" BSP Female elbow 3/4 BSP Female elbow 1" BSP Plug in straight pipe (22mm)

Approval Holder:: LUXOR S.p.A.

Company Name
LUXOR S.p.A.
Address
Via Madonnina, 94 Montichiari (BS)
Postcode
25018
Country
Italy
Phone
+39 030 9961161
General Email
marco.cauzzi@luxor.it

View All Listings by this Company

WRAS Approval Number: #251204703

Range of single or double tank water heaters, incorporating enamel coated carbon steel tank. The secondary circuit is factory fitted with a temperature and pressure relief valve (10.0 Bar). Maximum working pressure 8 bar. Maximum operating temperature 75 °C.

Section:: 1890 Unvented Heating Apparatus
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M)
Marking:: Vanward, model, pressure and other tech info on label.
Installation Requirements:: R001 R140
Expiry date:: 31/12/2030
Model:: Round Tank Electric Water Heater: Face of Unit: B7E DSCF**-B7EHV-15, DSCF**-B7EHV-20, DSCF**-B7EEHV-20 Face of Unit: B8E DSCF**-B8EHV-15, DSCF**-B8EHV-20, DSCF**-B8EEHV-20 Face of Unit: B10E DSCF**-B10EHV-15, DSCF**-B10EHV-20, DSCF**-B10EEHV-20 Face of Unit: D1M DSCF**-D1MHV-15, DSCF**-D1MHV-20, DSCF**-D1MGHV, DSCF**-D1MGEHV Face of Unit: D2M DSCF**-D2MHV-15, DSCF**-D2MHV-20, DSCF**-D2MEHV-20 Face of Unit: D3M DSCF**-D3MHV-15, DSCF**-D3MHV-20, DSCF**-D3MEHV-20, DSCF**-D3MGHV-20, DSCF**-D3MGEHV-20 Face of Unit: D4M DSCF**-D4MHV-15, DSCF**-D4MHV-20, DSCF**-D4MEHV-20 Face of Unit: D5M DSCF**-D5MHV-15, DSCF**-D5MHV-20, DSCF**-D5MGHV-20, DSCF**-D5MEHV-20, DSCF**-D5MGEHV-20 Face of Unit: H1M DSCF**-H1MHV-15, DSCF**-H1MHV-20 Face of Unit: B1M DSCF**- DSCF**-B1MHV-20, DSCF**-B1MHV-15, DSCF**-B1MGHV-15, DSCF**-B1MGEHV Face of Unit: B1E DSCF**-B1EHV-20, DSCF**-B1EHV-15, DSCF**-B1EHV, DSCF**-B1EEHV Face of Unit: B2M DSCF**-B2MHV-15, DSCF**-B2MHV-20, DSCF**-B2MGHV-20, DSCF**-B2MGEHV-20 Face of Unit: B2M2 DSCF**-B2M2HV-15, DSCF**-B2M2HV-20 Face of Unit: B2E DSCF**-B2EHV-15, DSCF**-B2EHV-20, DSCF**-B2EEHV-20 Face of Unit: B3M DSCF**-B3MHV-15, DSCF**-B3MHV-20, DSCF**-B3MEHV-20 Face of Unit: B4M DSCF**-B4MHV-15, DSCF**-B4MHV-20, DSCF**-B4MEHV-20 Face of Unit: B5M DSCF**-B5MHV-15, DSCF**-B5MHV-20, DSCF**-B5MEHV-20 Face of Unit: B6M DSCF**-B6MHV-15, DSCF**-B6MHV-20, DSCF**-B6MEHV-20, DSCF**-B6MGHV-20, DSCF**-B6MGEHV-20 Face of Unit: B9E DSCF**-B9EHV-15, DSCF**-B9EHV-20, DSCF**-B9EEHV-20 Face of Unit: B11E DSCF**-B11EHV-20 Coding: 1. **= Capacity (30L, 50L, 80L, 100L, 120L, 150L) 2. B7, B8, B10, D1, D2, D3, D4, D5, H1, B1, B2, B3, B4, B5, B6, B9, B11, B13 = cover 3. M = mechanical type, E (behind the cover) = screen- touch type 4. "2" = mechanical type with digital display, none = others 5. G = adjustable temperature & power level, none = unadjustable ones 6. E (behind the operating type) = enamel coated heating pipe, none = regular one without coated 7. HV = installation type = horizontally & vertically installed type, none = vertically installed type 8. “20” = max rated power = 2kW, “15” = max rated power = 1.5kW (can be omitted) Face of Unit: B13 DSCF30-B13-15, DSCF30-B13E-15, DSCF30-B13-20, DSCF30-B13E-20, DSCF50-B13-15, DSCF50-B13E-15, DSCF50-B13-20, DSCF50-B13E-20, DSCF55-B13-15, DSCF55-B13E-15, DSCF55-B13-20, DSCF55-B13E-20, DSCF80-B13-15, DSCF80-B13E-15, DSCF80-B13-20, DSCF80-B13E-20, DSCF100-B13-15, DSCF100-B13E-15, DSCF100-B13-20, DSCF100-B13E-20, DSCF120-B13-15, DSCF120-B13E-15, DSCF120-B13-20, DSCF120-B13E-20 Coding for Face of Unit: B13 only 1. All models are screen-touch type 2. Fixed capacity (30L, 50L, 55L, 80L, 100L, 120L) 3. B13 = cover 4. E = enamel coated heating pipe, none = regular one without coated 5. 20 = max rated power = 2kW, 15 = max rated power = 1.5kW Double Tank Electric Water Heater Face of Unit: T1M DSCF**-T1MHV-20 Face of Unit: T1E DSCF**-T1EHV-20 Face of Unit: T1M2 DSCF**-T1M2HV-20 Face of Unit: T2E DSCF**-T2EHV-20 Coding 1. **= Capacity (available in 30, 50, 80, 100: 30 stands for 28L, 50 for 47L, 80 for 66L, 100 for 81L) 2. T1, T2 = cover 3. M = mechanical type, E = screen-touch type 4. "2" (behind the operating type) = 2 knobs, none = 1 knob 5. HV = installation type = horizontally & vertically installed type 6. 20 = max rated power = 2kW

Approval Holder:: Guangdong Vanward Electric Co. Ltd.

Company Name
Guangdong Vanward Electric Co. Ltd.
Address
East Side of Yangxi Avenue (Renhe), Yanghe, Gaoming, Foshan Guangdong
Country
China
Phone
+86-757-28898888
General Email
vanward@vanward.com

View All Listings by this Company

WRAS Approval Number: #260112304

Section:: 2000 Shower Valves
Description:: A Shower valve(s) with manual temperature control.
Wall Mounted Undefinable Air Gap - See IRN's
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
1011JC45	Chrome	½” BSP (M) x ¾” BSP (M) offset union	10 bar	85 °C	HUANRI	Rear of body	No			Open Outlet

Approval Holder:: Zhejiang Huanri Sanitation Co,.Ltd.

Company Name
Zhejiang Huanri Sanitation Co,.Ltd.
Address
Xuanmen Industrial Zone, Lupu Town Yuhuan County Zhejiang Province
Country
China

View All Listings by this Company
Manufacturers:: Zhejiang Huanri Sanitation Co,.Ltd.

WRAS Approval Number: #251216301

Section:: 2010 Shower Valves
Description:: A Shower valve(s) with thermostatic temperature control
Wall Mounted The thermostatic control incorporates an manual override function
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
F1100*	chrome or matte black	3/4” BSP(F)	5 bar	85 °C	KY-LIN	on body	No	Ceramic cartridge

Notes & Further Information: Where * denotes the finish color, and can be replaced with the following: CHR = Chrome BLK = Matte Black The inlets incorporate stainless steel strainers and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Approval Holder:: KYLIN Sanitary Technology (Xiamen) Co., Ltd

Company Name
KYLIN Sanitary Technology (Xiamen) Co., Ltd
Address
No.878, Tongfu Road, Tong’an District, Xiamen City, Fujian Province
Postcode
361100
Country
China
Phone
+86 159 8082 4540
General Email
961459820@qq.com

View All Listings by this Company
Manufacturers:: KYLIN Sanitary Technology (Xiamen) Co., Ltd

WRAS Approval Number: #260112301

Section:: 2010 Shower Valves
Description:: A Range of Shower valve(s) with thermostatic temperature control
Wall Mounted Concealed Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection) Model series 2702 has an additional wall outlet.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork
SD-ZJXXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD124-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD205-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD127-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD170-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD190-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD246-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD191-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD109-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD207-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD101-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD116-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD117-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD125-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD128-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD156-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD168-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD209-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD210-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD212-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD213-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD220-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD222-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD236-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD238-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD240-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc

Notes & Further Information: XXXX represent five series shower valves and can be replaced to 2500, 2501, 2503, 2504, 2702.

Approval Holder:: Zhejiang Shengdian Sanitary Ware Co., Ltd

Company Name
Zhejiang Shengdian Sanitary Ware Co., Ltd
Address
Shangshan Industrial Zone, Qinggang, Yuhuan
Postcode
317606
Country
Zhejiang,

View All Listings by this Company
Manufacturers:: ZHEJIANG SHENGDIAN SANITARY WARE CO.LTD

WRAS Approval Number: #251088306

Section:: 2010 Shower Valves
Description:: A Range of Shower valve(s) with thermostatic temperature control
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R040
Expiry date:: 31/10/2030
Model:: 81971 57406

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
81971	Chrome	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	ebb+flo	in the middle of thermostatic valve	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
57406	Chrome	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	ebb+flo	in the middle of thermostatic valve	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Riser Rail,

Approval Holder:: Travis Perkins PLC

Company Name
Travis Perkins PLC
Address
Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

WRAS Approval Number: #2204374

VF900 Range of wafer butterfly valves with blue, black or red epoxy coated ductile iron bodies, zinc coated (galvanised) discs and EPDM seats, incorporating hand wheel operating members. Maximum working pressure 16.0 bar. Maximum operating temperature 70°C.

Section:: 2020 Valves
Section Subtitle:: Butterfly.
WRAS Approval Number:: 2204374
Size:: Please refer to model.
Marking:: DN and PN on body. Atusa Company logo and technical information on data plate.
Installation Requirements:: R001
Expiry date:: 30/04/2027
Model:: VF900: DN50 - DN400.

Approval Holder:: ATUSA GRUPO EMPRESARIAL, S.A.

Company Name
ATUSA GRUPO EMPRESARIAL, S.A.
Address
Pol. Industrial ATUSA-Agurain, S/N 01200 Salvatierra (Álava- España)
Phone
+34 945 18 00 00
General Email
info@atusa.es

View All Listings by this Company

WRAS Approval Number: #260204004

Range of spherical valves incorporating brass bodies and ball. Maximum working pressure see models. Maximum operating temperature 100°C.

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 260204004
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: Airaga logo, size PN, D.o.M. (YYWW).
Installation Requirements:: R001
Expiry date:: 28/02/2031
Model:: AI-171RB5 ¾” FF 40bar AI-171RB4 ½” FF 50bar AI-171BB5 ¾” FF 40bar AI-171BB4 ½” FF 50bar AI-171R12 4” FF 16bar AI-171R11 3” FF 16bar AI-171R10 2 ½” FF 16bar AI-171R03 3/8” FF 40bar AI-171R02 ¼” FF 40bar AI-171B11 3” FF 16bar AI-171B10 2 ½” FF 16bar AI-171B03 3/8” FF 40bar AI-171B02 ¼” FF 40bar AI-171B12 4” FF 16bar AI-171R09 2” FF 16bar AI-171R08 1 ½” FF 16bar AI-171R07 1 ¼” FF 25bar AI-171R06 1” FF 40bar AI-171R05 ¾” FF 40bar AI-171R04 ½” FF 50bar AI-171B09 2” FF 16bar AI-171B08 1 ½” FF 16bar AI-171B07 1 ¼” FF 25bar AI-171B05 ¾” FF 40bar AI-171B06 1” FF 40bar AI-171B04 ½” FF 50bar 124-1027 1” MM 40bar 124-1041 CST 3/8” MM 40bar 124-1042 CST ½” MM 40bar 124-1043CST ¾” MM 40bar 124-1044 CST 1” MM 25bar 124-1031 CST 1 ¼” MM 25bar 124-1032 CST 1 ½” MM 16bar 124-1033 CST 2”MM 16bar 124-1027 CST 3/8” MM 40bar 124-1028 CST ½” MM 40bar 124-1029 CST ¾” MM 40bar 124-1030 CST 1” MM 25bar AI-8718686945 ¾” MM 50bar AI-3621050503 ¾” MM 50bar AI-3621050501 ¾” MM 50bar 124-3001 1” MF 10bar AI-085805 ¾” MF 50bar AI-856A04 ½” MF 50bar AI-856A05 ¾” MF 50bar AI-0856A06 1” MF 40bar AI-0856A07 1 1/4" MF 25bar AI-0856A08 1 1/2" MF 16bar AI-0856A09 2" MF 16bar AI-176A07 1 1/4" MF 25bar AI-085806 1” MF 40bar AI-085806B 1” MF 40bar AI-085805B ¾” MF 50bar 124-3200 ½” MF 50bar 124-3201 ¾” MF 40bar 124-3202 1” MF 40bar 124-3203 1 ¼” MF 25bar 124-3204 1 ½” MF 16bar 124-3205 2”MF 16bar

Approval Holder:: Altecnic Limited

Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company
Manufacturer:: Airaga Rubinetterie Spa

Company Name
Airaga Rubinetterie Spa
Address
Via Per Briga 42 28024 Gozzano Novara
Country
Italy
General Email

View All Listings by this Company

WRAS Approval Number: #251208006

Screwdriver operated angled spherical valve with a brass body and ball, PTFE seats and EPDM ‘O’-rings. Compression connection is to be used with copper pipe EN1057. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C.

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 251208006
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15mm compression x ½” BSP (M).
Marking:: Orkli logo on body, customer reference, production date and hour (DD/MM/YY, HH:MM) printed on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: 9C23022

Approval Holder:: Orkli S. Coop

Company Name
Orkli S. Coop
Address
Ctra. Zaldibia, s/n Ordizia
Postcode
20240
Country
Spain
Phone
+34 610 146 459
General Email
iangulo@orkli.es

View All Listings by this Company

WRAS Approval Number: #251215003

Range of lever operated spherical valves with a nickel plated brass body, chromium plated brass ball and PTFE seats. Compression ends are for use with copper pipes (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 251215003
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: F00237: 15mmx15mm compression, F00238: 22mmx22mm compression, F00239: 28mmx28mm compression.
Marking:: Avonflow, WRAS and size on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: F00237, F00238, F00239.

Approval Holder:: Jiangxi Avonflow Hvac Tech Co., Ltd

Company Name
Jiangxi Avonflow Hvac Tech Co., Ltd
Address
No.97, Xingye Avenue, Economic Development Zone, Shangrao City Jiangxi Province
Country
China

View All Listings by this Company

WRAS Approval Number: #241202087

Range of gate valves with ductile iron bodies (blue epoxy coated), EPDM coated wedge and EPDM O - rings. Maximum working pressure – 10.0 bar (DN900 and DN1000 only) and 16.0 bar (DN350 – DN800). Maximum operating temperature - 85°C

Section:: 2290 Valves
Section Subtitle:: Stop, gate, metal.
WRAS Approval Number:: 241202087
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN350 – DN1000 flanged
Marking:: Size, PN, model number and Aquaflow logo on body.
Installation Requirements:: R001
Expiry date:: 31/12/2029
Model:: Aquavault range

Approval Holder:: T-T FLOW

Company Name
T-T FLOW
Address
ONNELEY WORKS NEWCASTLE ROAD WOORE Cheshire
Postcode
CW3 9RU

View All Listings by this Company