VSH XPRESS Range of ‘M’ profile stainless steel press fittings with EPDM ‘O’-rings for use with VSH SudoXPress stainless steel tube. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Range of brass or copper capillary solder ring fittings for use with copper pipe. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
Plastic bodied push fit fittings for use with Shin Won Tube Co., Ltd. SWPE™ (LLDPE) tube, (not covered by the scope of this approval). Maximum working pressure 10.0 bar. Cold water use only.
Range of pressure transmitters with stainless steel bodies. Maximum working pressure 100.0 Bar Maximum operating temperature 80.0°C (Type 540) or 100.0°C (Type 520 & Type 522)
Range of flanged ball type non-return valves with blue epoxy coated ductile iron bodies, EPDM lined ductile iron balls, and EPDM gaskets. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
A range of Shower handsets in various finishes. Open outlet. Maximum operating temperature 60 °C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A108102 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No | ||||
| A110101 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No | ||||
| A111101 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No | ||||
| A173102 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No | ||||
| A173302 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No | ||||
| A184101 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No | ||||
| A184302 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No | ||||
| A213101 | Chromed | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | ||||
| A215101 | Chromed | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | ||||
| A220103 | Chromed | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | ||||
| A238104 | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | |||||
| A239104 | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | |||||
| A258102 | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | |||||
| A259102 | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | |||||
| A268102 | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | |||||
| A269102 | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | |||||
| A293102 | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | |||||
| A297101 | Chromed | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | ||||
| A298101 | Chromed | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | ||||
| A506101 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No | ||||
| A515301 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No | ||||
| A515302 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No | ||||
| A520301 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No | ||||
| A520302 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| VAL2 HNK FL5 C CD | Chrome (Cr6) | 1/2" BSP (M) | 5 bar | 60 °C | Bristan | Operating member | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | Flow Regulator Fitted, |
| VAL2 HNK C CD | Chrome (Cr6) | 1/2" BSP (M) | 5 bar | 60 °C | Bristan | Operating member | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| VAL2 HNK C 6 CD | Chrome (Cr6) | 1/2" BSP (M) | 5 bar | 60 °C | Bristan | Operating member | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| VAX HNK C | Chrome (Cr6) | 1/2" BSP (M) | 5 bar | 60 °C | Bristan | Operating member | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| VAC HNK C MT | Chrome (Cr6) | 1/2" BSP (M) | 5 bar | 60 °C | Bristan | Operating member | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| RP3 VAL2 HNK C 6 CD | Chrome (Cr3) | 1/2" BSP (M) | 5 bar | 60 °C | Bristan | Operating member | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| RP3 VAL2 HNK C CD | Chrome (Cr3) | 1/2" BSP (M) | 5 bar | 60 °C | Bristan | Operating member | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| RP3 VAX HNK C | Chrome (Cr3) | 1/2" BSP (M) | 5 bar | 60 °C | Bristan | Operating member | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| RP3 VAC HNK C MT | Chrome (Cr3) | 1/2" BSP (M) | 5 bar | 60 °C | Bristan | Operating member | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 61407 | Chrome plated | 1/2" BSP (M) | 10 bar | 85 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| 61107 | Chrome plated | 1/2" BSP (M) | 10 bar | 85 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| 51507AQ | Chrome plated | 1/2" BSP (M) | 10 bar | 85 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| 61477 | Chrome plated | 1/2" BSP (M) | 10 bar | 85 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| 61177 | Chrome plated | 1/2" BSP (M) | 10 bar | 85 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 794110 | Chrome | 3/8" | 5 bar | 60°C °C | DELABIE | On the push button | Yes | Time-flow | Metal Backnuts | Aerator | Flow Regulator Fitted, |
| 794110S | Satine | 3/8" | 5 bar | 60°C °C | DELABIE | On the push button | Yes | Time-flow | Metal Backnuts | Aerator | Flow Regulator Fitted, |
| 794110BK | Black | 3/8" | 5 bar | 60°C °C | DELABIE | On the push button | Yes | Time-flow | Metal Backnuts | Aerator | Flow Regulator Fitted, |
| 794120 | Chrome | 3/8" | 5 bar | 60°C °C | DELABIE | On the push button | Yes | Time-flow | Metal Backnuts | Aerator | Flow Regulator Fitted, |
| 794120S | Satine | 3/8" | 5 bar | 60°C °C | DELABIE | On the push button | Yes | Time-flow | Metal Backnuts | Aerator | Flow Regulator Fitted, |
| 794120BK | Black | 3/8" | 5 bar | 60°C °C | DELABIE | On the push button | Yes | Time-flow | Metal Backnuts | Aerator | Flow Regulator Fitted, |
S : for satine finish BK : for Black finish
Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined flexible hose assemblies with DZR brass end connections. Some models incorporate spherical valves. Pushfit and compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of concealed flow controls (brass body with various finishes) incorporating two, quarter turn ceramic disc headworks with single lever operating members controlling the flow to an external outlet (not supplied). Model BK2 is a flow control with adjustable bracket and collection box. Model BK2A is a flow control with bracket. Model BK2B is a flow control. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RNDSCBV2.MB | Matt Black | ½”x ¾” BSP (M) offset unions or 15mm compression | 5.0 bar | 65 °C | Aqualisa | Valve Body | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail, |
| AQ150BAR2 | Chrome | ½”x ¾” BSP (M) offset unions or 15mm compression | 5.0 bar | 65 °C | Aqualisa | Valve Body | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail, |
| 300RSC | Chrome | ½”x ¾” BSP (M) offset unions or 15mm compression | 5.0 bar | 65 °C | Aqualisa | Valve Body | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail, |
| TWBAR2.21 | Chrome | ½”x ¾” BSP (M) offset unions or 15mm compression | 5.0 bar | 65 °C | Aqualisa | Valve Body | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail, |
| AQ150BAR2.MB | Matt Black | ½”x ¾” BSP (M) offset unions or 15mm compression | 5.0 bar | 65 °C | Aqualisa | Valve Body | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail, |
| TS150BAR2 | Chrome | ½”x ¾” BSP (M) offset unions or 15mm compression | 5.0 bar | 65 °C | Aqualisa | Valve Body | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail, |
| 126HP | Chrome | ½”x ¾” BSP (M) offset unions or 15mm compression | 5.0 bar | 65 °C | Aqualisa | Valve Body | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail, |
| 126HP.MB | Matt Black | ½”x ¾” BSP (M) offset unions or 15mm compression | 5.0 bar | 65 °C | Aqualisa | Valve Body | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail, |
| AQSQBAR2 | Chrome | ½”x ¾” BSP (M) offset unions or 15mm compression | 5.0 bar | 65 °C | Aqualisa | Valve Body | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail, |
| TSSQBAR2 | Chrome | ½”x ¾” BSP (M) offset unions or 15mm compression | 5.0 bar | 65 °C | Aqualisa | Valve Body | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail, |
| 408HP | Chrome | ½”x ¾” BSP (M) offset unions or 15mm compression | 5.0 bar | 65 °C | Aqualisa | Valve Body | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail, |
| 300SSC | Chrome | ½”x ¾” BSP (M) offset unions or 15mm compression | 5.0 bar | 65 °C | Aqualisa | Valve Body | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail, |
| AQSQBAR2.MB | Matt Black | ½”x ¾” BSP (M) offset unions or 15mm compression | 5.0 bar | 65 °C | Aqualisa | Valve Body | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail, |
The “*” is for a different Overhead Shower, Shower Hose or Shower Handset, which represent the letters A to Z X XXX Denotes the following: First X: Different handle The second, third & fourth XXX for different finishes: Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.
Range of wall mounted bar type thermostatic shower mixing valve with chromium plated brass body incorporating a non-rising spindle headwork with a dome operating member controlling the flow. The temperature is independently controlled via a thermostatic cartridge incorporating a manual over ride button with a dome type operating member. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainer. Maximum working pressure 5.0 Bar, Maximum operating temperature 60 °C
Range of wall mounted, concealed thermostatic shower valves incorporating 2 way or 3 way function with push button headworks controlling the flow to either shower outlets. The temperature is controlled independently via a thermostatic cartridge. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C
Range of pre-set, spring loaded, angled pressure relief valves (set at various pressure, see models), with plastic bodies. The valves are fitted with either rotary type easing gear or hand operated lifting gear. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.
Range of inline magnetic or electrolytic scale inhibitors with copper or bodies, for use with copper pipe (manufactured to BS EN 1057). Maximum working pressure 8.0 bar. Electrolytic models have a maximum operating temperature of 40°C. Magnetic models are cold water use only.
'Dicoat Medium Temp Black'. Factory applied, black coloured bitumen coating. Apply at a Relative Humidity of below 60% as per manufacturer's user instructions reference 'SPL/RD/UI/2019100121', issue no. '01' dated 08.07.2020. Cure for 7 days@30°C. For use with water up to 23°C. This material is only approved for the RH & curing conditions that appear on the approval. If the RH and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'IF1947T'. Factory applied, red coloured Fusion Bonded Epoxy coating. Apply as per manufacturer's Instructions for Use 'Doc. No. SPPR/L3/WI/PRD/28.' Cure for 45 minutes@220°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'NextGen NP-F9500 PW'. Factory applied, blue coloured powder coating. Apply as per National Paints technical data sheet 'FBE/ REV01 09-07-2019'. Cure for 3 minutes@240°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'ShaliPoxy 400 FG'. Factory applied, white coloured, two-component epoxy coating. Mix components A & B in a volume ratio of 3:1 and apply as per manufacturer’s TDS ‘0982019’. Cure for 7 days@27°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'FOWRY-190920'. Black coloured, compression moulded EPDM rubber. Shore hardness 75. Tested in-radius size 3.0mm. For use with water up to 85°C.
'E7015'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.19mm. For use with water up to 23°C.
'Weld-On ® 319 PVC Cement'. Clear solvent cement. Apply as per manufacturer's Product Data Sheet '319-05-2025'. Cure for 4 hours@5°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| F9009K-** | Various | BSP 3/4" (M) | 10 bar | 85 °C | LAN BIAO | Spout | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | Interconnecting Hoses, |
** denotes finish: No Suffix = Chrome, H = Black, DYB = Matte white, BZ = Perl white painted, HGTS = Red bronze, HTL = Yellow bronze brushed, Q = Bronze, QTSL = Bronze brushed bright, QTS = Bronze brushed matte, STS = Acid copper brushed, SDMGJ = Water plated rose gold, N = Nickel brushed bright light, NP = Nickel brushed, TJ = Titanium gold, TJLS = Titanium gold brushed, G = Gold, GJS = Gold brushed, GJSY = Zirconium gold wire drawing matte, PGJFY = Zirconium gold wire drawing matte bright light, PLSJ = Brushed gold, LSJY = Brushed gold matte, MGJ = Rose gold, MGJL = Rose gold brushed, DMGJ = Light rose gold brushed, HTS = Red bronze brushed, QHP = Grey, LSQH = Grey brushed, LHMGJ = Brushed yellow rose gold.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| JD-744* ** | Various | BSP 1/2" (M) | Open outlet use only bar | 60 °C | Kind | Handle | No | Not applicable | Not Applicable | Open Outlet | Flow Regulator Fitted, Shower Hose, Handset, |
| SJS-200* ** | Various | BSP 1/2" (M) | Open outlet use only bar | 60 °C | Kind | Handle | No | Not applicable | Not Applicable | Open Outlet | Flow Regulator Fitted, Shower Hose, Handset, |
| JD-795* ** | Various | BSP 1/2" (M) | Open outlet use only bar | 60 °C | Kind | Handle | No | Not applicable | Not Applicable | Open Outlet | Flow Regulator Fitted, Shower Hose, Handset, |
| JD-300* ** | Various | BSP 1/2" (M) | Open outlet use only bar | 60 °C | Kind | Handle | No | Not applicable | Not Applicable | Open Outlet | Flow Regulator Fitted, Shower Hose, Handset, |
| JD-798* ** | Various | BSP 1/2" (M) | Open outlet use only bar | 60 °C | Kind | Handle | No | Not applicable | Not Applicable | Open Outlet | Flow Regulator Fitted, Shower Hose, Handset, |
The first * stands for the different handle A, B,C and D, if there is no handle, no first * ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| KITM03 | Chrome | ½” Captive nut. | 0 bar | 65 °C | Deva | on handset | No | Shower Hose, Handset, Riser Rail, | |||
| SIGKITM02 | Chrome | ½” Captive nut. | 0 bar | 65 °C | Deva | on handset | No | Shower Hose, Handset, Riser Rail, | |||
| SIGKITS01 | Chrome | ½” Captive nut. | 0 bar | 65 °C | Deva | on handset | No | Shower Hose, Handset, Riser Rail, |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 86005740 | chrome | 1/2 BSP | 10 bar | 75 °C | Triton | on front plate | No | Ceramic cartridge | Not Applicable | Not Applicable |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 108-6027 | Chrome plated | 3/4" BSP (F) x 1/2" BSP (F) | 10 bar | 70 °C | CEILSA | Handle | No | 1/2 Turn ceramic disc | Not Applicable | Not Applicable | |
| 310-6020 | Chrome plated | 3/4" BSP (F) x 1/2" BSP (F) | 10 bar | 70 °C | CEILSA | Handle | No | 1/2 Turn ceramic disc | Not Applicable | Not Applicable | |
| 365-6027 | Chrome plated | 3/4" BSP (F) x 1/2" BSP (F) | 10 bar | 70 °C | CEILSA | Handle | No | 1/2 Turn ceramic disc | Not Applicable | Not Applicable | |
| 220-6020 | Chrome plated | 3/4" BSP (F) x 1/2" BSP (F) | 10 bar | 70 °C | CEILSA | Handle | No | 1/2 Turn ceramic disc | Not Applicable | Not Applicable | |
| 108-6055 | Chrome plated | 3/4" BSP (F) x 1/2" BSP (F) | 10 bar | 70 °C | CEILSA | Handle | No | 1/2 & 1/4 Turn ceramic disc | Not Applicable | Not Applicable | |
| 310-6050 | Chrome plated | 3/4" BSP (F) x 1/2" BSP (F) | 10 bar | 70 °C | CEILSA | Handle | No | 1/2 & 1/4 Turn ceramic disc | Not Applicable | Not Applicable | |
| 365-6055 | Chrome plated | 3/4" BSP (F) x 1/2" BSP (F) | 10 bar | 70 °C | CEILSA | Handle | No | 1/2 & 1/4 Turn ceramic disc | Not Applicable | Not Applicable | |
| 220-6050 | Chrome plated | 3/4" BSP (F) x 1/2" BSP (F) | 10 bar | 70 °C | CEILSA | Handle | No | 1/2 & 1/4 Turn ceramic disc | Not Applicable | Not Applicable |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SH803A | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 bar | 85 °C | ALFRED LOGO | Rear of body | No | 1/2 Turn ceramic disc | Not Applicable | ||
| SH803ABB | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 bar | 85 °C | ALFRED LOGO | Rear of body | No | 1/2 Turn ceramic disc | Not Applicable | ||
| SH803ABBN | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 bar | 85 °C | ALFRED LOGO | Rear of body | No | 1/2 Turn ceramic disc | Not Applicable | ||
| SH803AK | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 bar | 85 °C | ALFRED LOGO | Rear of body | No | 1/2 Turn ceramic disc | Not Applicable | ||
| SH804A | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 bar | 85 °C | ALFRED LOGO | Rear of body | No | 1/2 Turn ceramic disc | Not Applicable | ||
| SH804ABB | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 bar | 85 °C | ALFRED LOGO | Rear of body | No | 1/2 Turn ceramic disc | Not Applicable | ||
| SH804AK | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 bar | 85 °C | ALFRED LOGO | Rear of body | No | 1/2 Turn ceramic disc | Not Applicable |
** denotes finish: No Suffix = Chrome, H = Black, DYB = Matte white, BZ = Perl white painted, HGTS = Red bronze, HTL = Yellow bronze brushed, Q = Bronze, QTSL = Bronze brushed bright, QTS = Bronze brushed matte, STS = Acid copper brushed, SDMGJ = Water plated rose gold, N = Nickel brushed bright light, NP = Nickel brushed, TJ = Titanium gold, TJLS = Titanium gold brushed, G = Gold, GJS = Gold brushed, GJSY = Zirconium gold wire drawing matte, PGJFY = Zirconium gold wire drawing matte bright light, PLSJ = Brushed gold, LSJY = Brushed gold matte, MGJ = Rose gold, MGJL = Rose gold brushed, DMGJ = Light rose gold brushed, HTS = Red bronze brushed, QHP = Grey, LSQH = Grey brushed, LHMGJ = Brushed yellow rose gold.
Page 19 of 19
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
