Range of in-line adjustable pressure reducing valves, with nickel plated DZR brass bodies and stainless-steel strainer. Various models are supplied with a pressure gauge (see model). Compression models are for use with BS EN1057 copper pipe. Maximum working pressure 16.0 Bar. Outlet pressure range: 0.8-6.0 bar. Maximum operating temperature 80°C.
Range of pilot operated pressure reducing valves with ductile iron bodies (blue epoxy coating) All models are fitted with a pressure reducing pilot valve, a needle valve and spherical valves. Maximum inlet supply pressure 16.0 bar. The outlet pressure is adjustable between 2.0 to 13.0~16.0 bar. Maximum operating temperature 65°C.
Range of pilot operated pressure reducing valves with ductile iron bodies (blue epoxy coating) All models are fitted with a pressure reducing pilot valve, a needle valve and spherical valves. Maximum inlet supply pressure 16.0 bar. The outlet pressure is adjustable between 2.0 to 13.0~16.0 bar. Maximum operating temperature 65°C.
Range of pre-set, spring loaded, angled pressure relief valves (set at various pressure, see models), with plastic bodies. The valves are fitted with either rotary type easing gear or hand operated lifting gear. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.
Latching solenoid valve with a black plastic body and an EPDM diaphragm. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C
Range of in-line spherical valves with brass or nickel-plated brass bodies (see model), chrome plated ball, PTFE seats and EPDM O-rings. The products are supplied with either a lever operating member, magnetic lockable operating member, red or yellow butterfly handle or short lever operating member (see model). Compression and pressfit connections are for use with PEX/AL/PEX multilayer pipes manufactured to EN ISO 21003. The pressfit connection jointing is achieved via a crimping tool using a ‘U’ or ‘TH’ profile. Maximum working pressures: 255, 256 and 257 models: 20.0 bar, All other models: 16.0 bar. Maximum operating temperatures: 201, 207 and 209 models: 90°C, All other models: cold water only.
Range of in-line spherical valves with a nickel-plated brass body, chromium plated brass ball, PTFE seats and EPDM ‘O’-rings. The products are supplied with a lever or a butterfly handle (models with BH suffix). Compression end connections are for use with copper pipe or Irish copper pipe ((IS) models) (manufactured to EN1057). Maximum working pressures: S0231 prefix models: 16.0 bar. S0232 prefix models: 25.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with nickel-plated brass bodies, chrome plated brass balls, PTFE seat (SD3009 only) and NBR ‘O’-rings. The SD3009 models are screw-driver operated, the SD6011 model incorporate a short lever operating member. The compression connections are for use with copper pipes (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
‘AQU Valves – LV16’ range of gate valves with DZR brass bodies and gate. The products incorporate a lockshield operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C
Range of resilient seated gate valves with blue epoxy coated ductile iron body and an EPDM coated ductile iron wedge. Maximum working pressure 16.0 bar. Maximum operating temperature 70°C.
Range of gate valves with blue epoxy coated ductile iron bodies and either an EPDM coated brass wedge (¾” - 1¼” of ASCENT01 models) or EPDM coated ductile iron wedge (all other models). The ASCENT01 models incorporate a square operating nut and the ASCENT02 models incorporate a hand wheel operating member. Maximum working pressures: ASCENT01 models: 16.0bar, ASCENT02 models: 10.0 or 16.0bar. Maximum operating temperature 85°C.
Range of gate valves with a non-rising spindle with a handwheel operating member or lockshield connection. All models have brass bodies and brass wedge. For use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of resilient seated gate valves with cast iron bodies (blue epoxy coated), EPDM coated cast iron wedges and a handwheel operating member. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of screw down stop valves with brass or DZR brass bodies. Valves incorporate EPDM seat washers and PTFE seals. Maximum working pressure: 16 bar. Maximum operating temperature: 95°C
Range of electronically controlled ion exchange water softeners (salt regenerated) for commercial and domestic use. Maximum working pressure 5.0 bar. Cold water use.
'AD-96'. White coloured, compression moulded ceramic material. For use with water up to 85°C.
'PROTEGOL UR Coating 32-45'. Factory applied, two-part, blue coloured, Polyurethane coating. Mix parts A and B in a 3:1 volume ratio and apply as per manufacturer's Application Instructions dated '06/2025'. Cure for 24 hours@23°C until a shore hardness of 70 D is reached. For use with water up to 65°C. his material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'PROTEGOL UR Coating 32-69 MB'. Factory applied, two-part, blue coloured, Polyurethane coating. Mix parts A and B in a 1:1 volume ratio and apply as per manufacturer's Application Instructions '06/2025'. Cure for 24 hours@23°C until a shore hardness of 70 D is reached. For use with water up to 65°C. his material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Rashmi Blast Furnace Slag Cement Mortar'. Factory applied, grey coloured, blast furnace slag cement mortar. Mix cement, sand & water in a mass ratio of 1:1.5:0.6 and apply as per manufacturer's work instructions 'RML/DI/WI/CMLC-10', 'Rev: 02', dated '12.10.2023'. Cure for 120 minutes@50°C, 98% RH. For use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.
'Aqua-GRP Water Tank Panel'. Off-white coloured, hot press moulded GRP tank panel. For use with water up to 65°C.
'Sangwon Korea 2026 Premium One Tank Panel'. Light grey coloured, hot press moulded GRP panel. For use with water up to 55°C.
'BADAMID A70 GF50 HE WL BLACK'. Black coloured, injection moulded, glass fibre reinforced PA66 material. For use with water up to 85°C.
'BADAMID A70 GF30 HE WL BLACK'. Black coloured, injection moulded, glass fibre ranforced PA66 material. For use with water up to 85°C.
Grivory GV-2H natural & GV-2H black 9915. GV-2 FWA natural & GV-2 FWA black 9225. GV-4H natural & GV-4H black 9915. GV-4 FWA natural & GV-4 FWA black 9225. GV-5H natural & GV-5H black 9915. GV-5 FWA natural, GV-5 FWA black 9225 & Grivory XE 4275 black 9225. GV-6H natural & GV-6H black 9915. GV-6 FWA natural & GV-6 FWA black 9225. Injection moulded, natural (appears white) or black coloured, glass reinforced nylon materials. For use with water up to 23°C.
'Grivory GV XE 10726 Black 9225'. Black coloured, injection moulded, glass reinforced polyamide material. For use with water up 23°C.
'Avaspire AV-651 BK95'. Black coloured, injection moulded PEEK (part of the PAEK family) material. For use with water up to 85°C.
'Takweenplast Series HDPE Fittings'. Black coloured, injection moulded HDPE fittings. For use with water up to 60°C.
'OL01 HDPE Fitting'. Black coloured, injection moulded HDPE fitting. For use with water up to 60°C.
'PVDF Solef® 6008/0001'. White/off-white coloured (translucent), injection moulded PVDF material. For use with water up to 85°C.
'5594903 'O' rings'. Black coloured, compression moulded EPDM 'O' rings. Shore hardness 90. Tested in-radii sizes between 0.4mm and 3.65mm. For use with water up to 85°C.
'5594610'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 85°C.
Range of smart Bidet assemblies with sensor actuated solenoid valves and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 8.0 Bar Maximum operating temperature Cold water use only
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| GT6002R-D-** | Various | hot/cold water inlet：M8x1, 1/2 BSP(F) Boiling water inlet:M8x1 | hot/cold water path: 10bar Boiling water path:5bar bar | hot/cold water path: 65℃ Boiling water path: 99℃ °C | GETTAI | On handle | No | Ceramic cartridge | Metal Backnuts | Aerator | |
| GT6002R-** | Various | hot/cold water inlet：M8x1, 1/2 BSP(F) Boiling water inlet:M8x1 | hot/cold water path: 10bar Boiling water path:5bar bar | hot/cold water path: 65℃ Boiling water path: 99℃ °C | GETTAI | On handle | No | Ceramic cartridge | Metal Backnuts | Aerator | |
| GT6024-** | Various | hot/cold water inlet：M8x1, 1/2 BSP(F) Boiling water inlet:M8x1 | hot/cold water path: 10bar Boiling water path:5bar bar | hot/cold water path: 65℃ Boiling water path: 99℃ °C | GETTAI | On handle | No | Ceramic cartridge | Metal Backnuts | Aerator | |
| GT6616-** | Various | hot/cold water inlet：M10x1, 1/2 BSP(F) Boiling water inlet:M10x1 | hot/cold water path: 10bar Boiling water path:5bar bar | hot/cold water path: 65℃ Boiling water path: 99℃ °C | GETTAI | On Body | No | Ceramic cartridge | Metal Backnuts | Aerator |
GT6002R-D-** & GT6002R-** only differ in spout Model code: “**” means different finishes -LC Brushed -LE Polished -MOB Matt Black -BK Steel Black -BS PVD Black -GM Gun Metal -CO Copper -GD Gold -TGD Titanium Gold
WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 Bar
Two-hole, single outlet, (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with a single lever operating member and a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3). The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts, shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| S001* | Various | 1/2" BSP (F) | 5 bar | 65 °C | WINSDRUM | On cover plate | No | Ceramic cartridge | Not Applicable | Aerator | Shower Hose, Handset, |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| KITM03 | Chrome | ½” Captive nut. | 0 bar | 65 °C | Deva | on handset | No | Shower Hose, Handset, Riser Rail, | |||
| SIGKITM02 | Chrome | ½” Captive nut. | 0 bar | 65 °C | Deva | on handset | No | Shower Hose, Handset, Riser Rail, | |||
| SIGKITS01 | Chrome | ½” Captive nut. | 0 bar | 65 °C | Deva | on handset | No | Shower Hose, Handset, Riser Rail, |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 86005740 | chrome | 1/2 BSP | 10 bar | 75 °C | Triton | on front plate | No | Ceramic cartridge | Not Applicable | Not Applicable |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 108-6027 | Chrome plated | 3/4" BSP (F) x 1/2" BSP (F) | 10 bar | 70 °C | CEILSA | Handle | No | 1/2 Turn ceramic disc | Not Applicable | Not Applicable | |
| 310-6020 | Chrome plated | 3/4" BSP (F) x 1/2" BSP (F) | 10 bar | 70 °C | CEILSA | Handle | No | 1/2 Turn ceramic disc | Not Applicable | Not Applicable | |
| 365-6027 | Chrome plated | 3/4" BSP (F) x 1/2" BSP (F) | 10 bar | 70 °C | CEILSA | Handle | No | 1/2 Turn ceramic disc | Not Applicable | Not Applicable | |
| 220-6020 | Chrome plated | 3/4" BSP (F) x 1/2" BSP (F) | 10 bar | 70 °C | CEILSA | Handle | No | 1/2 Turn ceramic disc | Not Applicable | Not Applicable | |
| 108-6055 | Chrome plated | 3/4" BSP (F) x 1/2" BSP (F) | 10 bar | 70 °C | CEILSA | Handle | No | 1/2 & 1/4 Turn ceramic disc | Not Applicable | Not Applicable | |
| 310-6050 | Chrome plated | 3/4" BSP (F) x 1/2" BSP (F) | 10 bar | 70 °C | CEILSA | Handle | No | 1/2 & 1/4 Turn ceramic disc | Not Applicable | Not Applicable | |
| 365-6055 | Chrome plated | 3/4" BSP (F) x 1/2" BSP (F) | 10 bar | 70 °C | CEILSA | Handle | No | 1/2 & 1/4 Turn ceramic disc | Not Applicable | Not Applicable | |
| 220-6050 | Chrome plated | 3/4" BSP (F) x 1/2" BSP (F) | 10 bar | 70 °C | CEILSA | Handle | No | 1/2 & 1/4 Turn ceramic disc | Not Applicable | Not Applicable |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SH803A | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 bar | 85 °C | ALFRED LOGO | Rear of body | No | 1/2 Turn ceramic disc | Not Applicable | ||
| SH803ABB | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 bar | 85 °C | ALFRED LOGO | Rear of body | No | 1/2 Turn ceramic disc | Not Applicable | ||
| SH803ABBN | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 bar | 85 °C | ALFRED LOGO | Rear of body | No | 1/2 Turn ceramic disc | Not Applicable | ||
| SH803AK | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 bar | 85 °C | ALFRED LOGO | Rear of body | No | 1/2 Turn ceramic disc | Not Applicable | ||
| SH804A | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 bar | 85 °C | ALFRED LOGO | Rear of body | No | 1/2 Turn ceramic disc | Not Applicable | ||
| SH804ABB | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 bar | 85 °C | ALFRED LOGO | Rear of body | No | 1/2 Turn ceramic disc | Not Applicable | ||
| SH804AK | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 bar | 85 °C | ALFRED LOGO | Rear of body | No | 1/2 Turn ceramic disc | Not Applicable |
** denotes finish: No Suffix = Chrome, H = Black, DYB = Matte white, BZ = Perl white painted, HGTS = Red bronze, HTL = Yellow bronze brushed, Q = Bronze, QTSL = Bronze brushed bright, QTS = Bronze brushed matte, STS = Acid copper brushed, SDMGJ = Water plated rose gold, N = Nickel brushed bright light, NP = Nickel brushed, TJ = Titanium gold, TJLS = Titanium gold brushed, G = Gold, GJS = Gold brushed, GJSY = Zirconium gold wire drawing matte, PGJFY = Zirconium gold wire drawing matte bright light, PLSJ = Brushed gold, LSJY = Brushed gold matte, MGJ = Rose gold, MGJL = Rose gold brushed, DMGJ = Light rose gold brushed, HTS = Red bronze brushed, QHP = Grey, LSQH = Grey brushed, LHMGJ = Brushed yellow rose gold.
Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating members. The spout outlet incorporates a plastic aerator, and the product is supplied with a permanently open type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Non-metallic materials and components comply with BS6920 at 60°C
XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C), Truffle (TF-C) Baby Pink (BP-C) Misty Grey (MG-C)
Range of single hole, single outlet (fixed) combination tap assemblies, (brass bodies – various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C), Truffle (TF-C) Baby Pink (BP-C) Misty Grey (MG-C)
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| CHV EFSNK C | Chrome | 15mm | 10 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disc | C-plate | Flow Straightener | |
| 7329V | Chrome | 15mm | 10 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disc | C-plate | Flow Straightener |
72329V - Screwfix selling code.
Wall mounted spout outlet (brass body - various finishes), incorporating a self-cancelling diverter to a shower outlet. The spout outlet incorporates a plastic aerator. Product is not supplied with shower hose and handset. Maximum working pressure: 10.0 bar. Maximum operating pressure: 60oC.
Expansion vessels incorporating a stainless steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 100˚C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TFP3001 | Chrome | 15mm compression | 10.0 bar | 60 °C | Bristan | Handle | No | Self closing | Not Applicable | Flow Straightener | Flow Regulator Fitted, |
| TFP3003 | Chrome | 15mm compression | 10.0 bar | 60 °C | Bristan | Handle | No | Self closing | Not Applicable | Flow Straightener | Flow Regulator Fitted, |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TVW127002001XX | Various | ½” BSP (M) inlets (BD355NU- core valve unit) | 10 bar | 60 °C | Villeroy & Boch | On the rosette | Yes | Aerator | Flow Regulator Fitted, | ||
| TVZ106012001XX | Various | ½” BSP (M) inlets (BD355NU- core valve unit) | 10 bar | 60 °C | Villeroy & Boch | On the rosette | Yes | Aerator | Flow Regulator Fitted, |
XX at the end indicates the Finish of surfaces that are not in contact with water (61 - Chrome, K5 - Matt black, 76 - Brushed gold, 64 - Brushed nickel). Products must be used in conjunction with concealed core valve unit ‘BD355NU Kit 1’ (not included as part of this approval)
Page 177 of 177
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
