SATK Series 22 range of wall-mounted direct heat interface units providing heating and instantaneous hot water. The hot water is generated via a plate heat exchanger. Maximum working pressure of all water circuits (secondary hot water, primary and space heating) 10.0 bar. Maximum operating temperature 90°C.
Range of water meters with brass bodies. The inlets incorporate a plastic filter. Maximum working pressure 16.0 Bar
Non-metallic materials and components comply with BS6920 at 50°C
Range of in-line water meters with brass bodies. The inlets incorporate a plastic filter. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 50°C
Range of water meters with plastic bodies. Maximum working pressure 16 Bar.
Non-metallic materials and components comply with BS6920 at 50°C
Water meter with a plastic body and working chamber incorporating and EPDM ‘O’-ring, NBR ‘O’-ring and seal. Available with a mechanical or electronic register. Maximum working pressure 16.0 bar. Cold Water use only.
Range of water meters with brass bodies, with integral plastic strainer and EPDM ‘O’- rings. The product is supplied with an optional combined plastic washer and stainless-steel strainer for installation on the inlet. Maximum working pressure 16.0 bar. Cold water use only.
Range of water meters with plastic or brass bodies, incorporating EPDM O-rings. Maximum working pressure 16.0 Bar
Non-metallic materials and components comply with BS6920 at 50°C
ALTAIR V5 Type A3 range of inline and concentric water meters. Inline models have brass or plastic bodies, concentric models are available with DZR brass or plastic bodies, the MCI model has a plastic body. Incorporates a plastic strainer. Maximum working pressure 16.0 bar. Cold water use only.
Range of water meters with blue epoxy power coated cast iron bodies, incorporating plastic turbines, NBR ‘O’-rings and gaskets. Maximum working pressure 16.0 bar. BS6920 50°C.
Pentobox range of water meter manifolds with plastic bodies and an integral spherical valve on the inlet. The models incorporate a non-return valve, (not suitable for backflow protection). Compression models are for use with metric and imperial PE80 pipe (manufactured to BS EN 12201). Maximum working pressure 16.0 bar. Cold water use only.
Magnetic non-return valve with a brass body and EPDM seals. Maximum working pressure 16.0 Bar. Cold water use only.
Range of hose assemblies. Models B0301-148036-000 & B0301-148038-000 comprise of a spherical valve, stainless-steel braided EPDM lined flexible hose and double check valve assembly (suitable for backflow protection against fluid category 3). Model B0301-148037-000 comprises of a double check valve assembly (suitable for backflow protection against fluid category 3), stainless-steel braided EPDM lined flexible hose and ‘T’ type spherical valve. Maximum working pressure 10.0 bar. Cold water use only.
Waste water heat recovery unit having with an internal copper tube which provides a double wall separation between the waste water and cold mains supply. Maximum working pressure 10 bar. Maximum operating temperature 50°C
Hydraulic circuit used to control the water path within the heating and sanitary boiler, with plastic body incorporating filter, flow regulator, plate heat exchanger and EPDM O-rings. Maximum working pressure 7.0 bar. Maximum operating temperature 85°C.
Range of pumps, single and 4-stage, with stainless steel bodies and plastic impellers. The pumps are housed within a plastic casing. The outlets of the WGZ15-20EA, WGZ15-45EA and WGZ15-45EAB models incorporate a non-return valve. The WGZ15-35EA.and WGZ15-35EAB models have a twin pump arrangement which incorporates a non-return valve within the connecting pipe between the pumps. Maximum working pressure 10.0 Bar. Maximum operating temperature 95°C.
Range of circulation pumps with a stainless steel body, plastic impeller and a silicone ‘O’-ring. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
Range of shower outlets with brass bodies (various finishes). The products incorporate a stainless-steel strainer and flow regulator. Open outlet use.
Range of overhead shower outlets with (chromium plated - brass bodies). The inlets incorporate a stainless-steel strainer and flow regulator. Model FLS-8120 Incorporates a shower arm.
Non-metallic materials and components comply with BS6920 at 60°C
Range of shower handsets and shower kits with chromium plated ABS bodies. Some models incorporate a shower hose.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted shower panels. The flow is controlled via a solenoid valve which is operated via an infrared sensor located at the bottom of the panel. Maximum working pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of shower outlet elbows with chrome plated brass bodies. The inlet incorporates a single check valve cartridge however, the complete product has not been fully tested to demonstrate It provides backflow protection. Open Outlet use only.
Non-metallic materials and components comply with BS6920 at 60°C
Range of overhead shower outlets with chromium plated plastic bodies. The inlets incorporate combined EPDM washers and stainless-steel strainers. Open outlet use only.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted, overhead shower outlets with brass bodies (chromium plated), EPDM o-rings, fibre gasket and strainer at the shower head inlets. Multiple spray patterns available which is controlled via solenoid valve and a touch sensor. Product incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Open outlet use only. Maximum working temperature 60°C.
Range of in-line Y-pattern strainers with blue epoxy coated ductile iron bodies, EPDM ‘O’-rings and a stainless-steel mesh. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of ‘Y’ Strainers with blue epoxy coated ductile iron bodies, incorporating a stainless-steel mesh. Maximum working pressure 16.0 Bar
Non-metallic materials and components comply with BS6920 at 85°C
Flow switch with a black plastic (nylon) body and an EPDM ‘O’-ring. The product incorporates a plastic filter on the inlet. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of pillar taps, (chrome plated brass body), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a flow straightener. Maximum working pressure 10 bar. Maximum operating temperature 45 C.
Range of nylon braided hoses with TPSiV inner liner and brass end connections incorporating EPDM washers.Open outlet use only.
Non-metallic materials and components comply with BS6920 at 65°C
‘Comfortflex’ range of silver braided shower hoses with a TPE inner hose and EPDM seals.Open outlet
Non-metallic materials and components comply with BS6920 at 60°C
Range of automatic air vent valves with blue epoxy coated cast iron bodies and EPDM seats. Maximum working pressure 16.0 Bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of wall mounted, manually operated blending shower valves with brass bodies (various finishes), incorporating a ceramic cartridge headwork and single lever operating members. The shower outlet connection incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection. The products are not supplied with shower hoses and handsets. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets of all models incorporate single check valve cartridges (verified by test - suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression fitting connection to be used with copper pipe EN1057 only. Maximum working pressure 10 bar. Maximum operating temperature 85°C except for models VAH0347 - 5059340245775 & VAH0348 - 5059340245782 both 60°C
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets of all models incorporate single check valve cartridges (verified by test - suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression fitting connection to be used with copper pipe EN1057 only. Maximum working pressure 10 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets of all models incorporate single check valve cartridges (verified by test - suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression fitting connection to be used with copper pipe EN1057 only. Maximum working pressure 10 bar. Maximum operating temperature 85°C except for models 86345023 & 86345034 both 60°C.
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets of all models incorporate single check valve cartridges (verified by test - suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression fitting connection to be used with copper pipe EN1057 only. Maximum working pressure 10 bar. Maximum operating temperature 85°C except for models 623224 & 623229 both 60°C.
Range of wall mounted thermostatic shower valves, (chrome plated brass bodies) incorporating spindle headworks controlling the flow with single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a cross-top operating member. The inlets incorporate flow regulators and approved check valve cartridges, (however, the complete product has not been fully tested to demonstrate that it provides backflow protection). The products are supplied with a shower kit consisting of a wall mounted elbow, overhead shower and a riser rail assembly. Maximum working pressure 10.0 Bar
Non-metallic materials and components comply with BS6920 at 85°C
Wall mounted thermostatic shower valve (chrome plated brass), incorporating a ceramic disc diverter cartridge controlling the flow from shower to shower with a cube operating member. The temperature is controlled independently via a thermostatic cartridge, with a cube operating member, that also incorporates a manual override button. The product is supplied with a chrome plated shower handset, shower hose and riser rail assembly. The inlets incorporate approved check valve cartridges, (however, the complete product has not been fully tested to demonstrate that it provides backflow protection), chrome plated spherical ball valves and stainless-steel strainers with EPDM gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets incorporate single check valve cartridges (verified by test - suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. models HVTMV-15IV & HVTMV-22IV are also fitted with brass isolating elbows. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted blending thermostatic shower valve (chrome plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge. Both using cube type operating members. The inlets incorporate approved check valve cartridges; however, the complete assembly has not been tested to demonstrate it provides backflow protection. The inlets also incorporate ¾” BSP (M) x 15mm compression (chrome plated) spherical ball valves and EPDM washers incorporating stainless steel mesh strainers. The product is supplied with a chrome plated shower handset, shower hose and riser rail assembly. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, exposed, thermostatic blending valve with a brass body (various finishes). The flow is controlled via a quarter turn ceramic disc with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member which incorporates a manual override button. Both inlets incorporate a stainless-steel strainer and a single check valve cartridge, however the complete product has not been fully tested to demonstrate It provides backflow protection. Product is not supplied with shower hose of handset. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Wall mounted thermostatic shower valve (brass body - various finishes and trim sets), incorporating a thermostatic cartridge controlling the flow and temperature with a single lever or cross top operating members with a manual override button. The inlets incorporate a stainless-steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar
Non-metallic materials and components comply with BS6920 at 85°C
Wall mounted, bar type thermostatic shower valve (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow using single lever operating members incorporating a manual override. The temperature is controlled independently via a thermostatic cartridge, using a single lever operating member incorporating a manual override button. The inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10.0 Bar
Non-metallic materials and components comply with BS6920 at 60°C
Range of T-type thermostatic mixing valves with brushed chrome plated DZR brass bodies. Each inlet incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression connections are for use with copper pipe (manufactured to BS EN1057). Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of T-type thermostatic mixing valves with brushed chrome plated DZR brass bodies and manually adjustable temperature control. The inlets of the press fit and push fit models incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Press fit and push fit connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of wall mounted, bar type thermostatic shower valves (brass body – various finishes), incorporating quarter turn ceramic disc headworks controlling the flow with single lever operating member that incorporates a manual override button. Temperature is controlled independently via a thermostatic cartridge with a single lever operating member that incorporates a manual override button. Each inlet and hand shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Product is supplied with shower hose, handset and overhead shower. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted, thermostatic shower valves (chrome plated brass bodies), model (OP TS1503 SCL C) incorporates a single sequential headwork controlling both flow and temperature. Model (TS1503ECP-2000-MK) incorporates a thermostatic mixing cartridge that only controls the temperature. The inlets incorporate flow regulators, plastic strainers and approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection). Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 65°C
Range of wall mounted, thermostatic shower valves, (chrome plated brass bodies), incorporating quarter turn ceramic disc headworks controlling the flow. The temperature is controlled independently via a thermostatic cartridge the temperature, both using single lever operating members. The inlets incorporate flow regulators, plastic strainers, screwdriver operated isolation valves and approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection). Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted bar type thermostatic shower mixers (chromium plated brass), incorporating a ¼ turn ceramic disc headwork controlling the flow, with single lever operating members. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. Models incorporate stainless-steel strainers, fibre gasket washers and single check valve cartridges (however, the complete product has not been fully tested to demonstrate it provides backflow protection) on the inlets. Products are not supplied with shower hose or handset. Maximum working pressure 10 bar. Maximum operating temperature 60°C.
Range of butterfly valves with blue epoxy coated ductile iron bodies and discs, and EPDM seals with a wheel type operating member. Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C
Non-metallic materials and components comply with BS6920 at 85°C
Range of wafer or lug type butterfly valves with blue epoxy coated cast or ductile iron bodies, blue epoxy coated ductile iron or stainless-steel discs and EPDM seats. Leaver or hand wheel operated. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Page 100 of 236
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
