Eltek SpA Approvals


WRAS Approval Number: 1611086

Double layer safety supply hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1863 Tubes
  • Section Subtitle: Elastomeric.
  • WRAS Approval Number: 1611086
  • Expiry date: 30/11/2021
  • Note: This product has not been tested to confirm the functionality of the safety mechanism incorporated within it. It has only been tested against the requirements of the Regulator’s specification.
  • Size: ¾” BSP (F)
  • Marking: Eltek, product code, date of manufacture & (YY/MM) & technical information on connection.
  • Installation Requirements R001 R008
  • Model
    100269.7x range. The ‘x’ is replaced by a letter ‘a’ to ‘z’ or a number ‘0’ to ‘9’ which denotes the length of the hose between 1,500mm & 3,000mm.
  • Factor: Eltek SpA
    Company Name
    Eltek SpA
    Address
    Strada Valenza 5/A 15033 - Casale Monferrato (AL) Italy
    Phone
    +39 0142 335511
    General Email
    salesdept@eltekgroup.it
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810082

Range of safety hose assemblies supplied with a dual layered, PVC hose (black coloured inner with a grey coloured outer) incorporating a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 1863 Tubes
  • Section Subtitle: Elastomeric.
  • WRAS Approval Number: 1810082
  • Expiry date: 31/10/2023
  • Size: ¾” captive nut inlet and outlet
  • Marking: Eltek logo, WRAS, model number, temperature and pressure, flow arrow on plastic case.
  • Installation Requirements R001 R008
  • Model
    101008.8x ‘x’ denotes the length of the hose between 1,500mm & 3,000mm.
  • Factor: Eltek SpA
    Company Name
    Eltek SpA
    Address
    Strada Valenza 5/A 15033 - Casale Monferrato (AL) Italy
    Phone
    +39 0142 335511
    General Email
    salesdept@eltekgroup.it
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904501

'15.0903.01 & 15.0902.01'. Dark grey coloured, ferrite anisotropic magnets (commonly known as ceramic magnets). For use with water up to 85°C

Print This Approval


WRAS Approval Number: 1811029

Flow regulator incorporating a plastic body and EPDM flow control. Maximum operating temperature 60°C.

  • Section: 0435 Combination Tap Assemblies - Components
  • Section Subtitle: Aerators, Flow Straighteners, Flow Regulators and Restrictors.
  • WRAS Approval Number: 1811029
  • Expiry date: 30/11/2023
  • Size: 19.2mm diameter.
  • Marking: Eltek on body.
  • Installation Requirements R001
  • Model
    10.0469.07.
  • Factor: Eltek SpA
    Company Name
    Eltek SpA
    Address
    Strada Valenza 5/A 15033 - Casale Monferrato (AL) Italy
    Phone
    +39 0142 335511
    General Email
    salesdept@eltekgroup.it
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812074

Flow switch with plastic body (PPO or Nylon) and EPDM `O`-ring, incorporating a plastic filter on the inlet and a 90° angled outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

  • Section: 1718 Switches
  • Section Subtitle: Flow control.
  • WRAS Approval Number: 1812074
  • Expiry date: 31/12/2023
  • Size: ½” BSP (M) x 26mm manifold
  • Marking: Eltek group + flow arrow on body
  • Installation Requirements R001
  • Model
    10.0730.50
  • Factor: Eltek SpA
    Company Name
    Eltek SpA
    Address
    Strada Valenza 5/A 15033 - Casale Monferrato (AL) Italy
    Phone
    +39 0142 335511
    General Email
    salesdept@eltekgroup.it
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1912524

'TF25SOFT'. Black coloured, extruded PTFE bush component. For use with water up to 85°C.

Print This Approval


WRAS Approval Number: 2001001

`Water block` self-closing valves with either a natural (white), blue or grey plastic body and a gear driven volume-controlled operation device. The product incorporates a combined EPDM washer and stainless steel strainer and EPDM ‘O’-rings. The product is designed to stop the flow of water once a preset value (in litres) has been reached. User intervention is then required to reset it. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2335 Valves
  • Section Subtitle: Stop, plastic, self-closing.
  • WRAS Approval Number: 2001001
  • Expiry date: 31/01/2025
  • Note: R008 only applies to the natural (white) body version. The self-closing function once a pre-set value has been reached has not been assessed and is not considered to be covered by the scope of this approval.
  • Size: ¾” BSP (F) inlet and ¾” BSP (M) outlet
  • Marking: Minimum working flow rate, flow arrow, water bloc, Eltek and 100N/cm2
  • Installation Requirements R001 R008
  • Model
    100041xx Where ‘xx’ denotes the setting notches regulation and packaging type to either a ‘0’ or ‘9’.
  • Factor: Eltek SpA
    Company Name
    Eltek SpA
    Address
    Strada Valenza 5/A 15033 - Casale Monferrato (AL) Italy
    Phone
    +39 0142 335511
    General Email
    salesdept@eltekgroup.it
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001004

`Water block` self-closing valve with magnetic scale inhibitor and grey plastic body and a gear driven volume-controlled operation device. The product incorporates a combined EPDM washer and stainless steel strainer and EPDM ‘O’-rings. The product is designed to stop the flow of water once a pre-set value (in litres) has been reached. User intervention is then required to reset it. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
  • WRAS Approval Number: 2001004
  • Expiry date: 31/01/2025
  • Note: The self-closing function once a pre-set value has been reached has not been assessed and is not considered to be covered by the scope of this approval.
  • Size: ¾” BSP (F) inlet and ¾” BSP (M) outlet
  • Marking: Eltek, water block, max flow rate and flow arrow on body.
  • Installation Requirements R001 R120 R150 R170 R290
  • Model
    101179xx The ‘x’ is replaced by a number ‘0’ to ‘9’ which denotes the setting notches regulation and packaging type.
  • Factor: Eltek SpA
    Company Name
    Eltek SpA
    Address
    Strada Valenza 5/A 15033 - Casale Monferrato (AL) Italy
    Phone
    +39 0142 335511
    General Email
    salesdept@eltekgroup.it
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010024

Impeller with plastic body for insertion into specifically dimensioned bores. Maximum operating temperature 70°C.

  • Section: 1530 Miscellaneous Fittings
  • WRAS Approval Number: 2010024
  • Expiry date: 31/10/2025
  • Size: 20mm Ø
  • Marking: Eltek Group on side of body.
  • Installation Requirements R001 R008
  • Model
    10102200
  • Manufacturer: Eltek SpA
    Company Name
    Eltek SpA
    Address
    Strada Valenza 5/A 15033 - Casale Monferrato (AL) Italy
    Phone
    +39 0142 335511
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2105009

Plug with nylon body and stainless steel shaft. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 1530 Miscellaneous Fittings
  • WRAS Approval Number: 2105009
  • Expiry date: 31/05/2026
  • Note: This approval does not include an ‘O’-ring, please seek specifications from the approval holder.
  • Size: ½" BSP (M)
  • Installation Requirements R001 R008
  • Model
    Type 10.1021.03 plug shaft without O-ring. Type 10.1021.04 plug shaft with ribs without O-ring.
  • Manufacturer: Eltek SpA
    Company Name
    Eltek SpA
    Address
    Strada Valenza 5/A 15033 - Casale Monferrato (AL) Italy
    Phone
    +39 0142 335511
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2