Wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating non-rising spindle headworks with dome type operating members and a lockable diverter to the shower outlet. The spout outlet incorporates a plastic aerator and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headworks with single lever operating members and self-cancelling diverter to shower outlet. The spout outlets incorporate a plastic flow straightener and the products are supplied with a pop-up waste. Both inlets incorporate a stainless-steel strainer and a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides adequate backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted two-hole, single outlet (fixed), thermostatically controlled combination tap assemblies (chrome plated brass). Flow is controlled and diverted, between the spout outlet and shower outlet, by a manual diverter. The diverter of model 3663602665083 diverter is operated by turning the spout through 90 degrees. Temperature is controlled independently via a thermostatic cartridge. The spout outlets incorporate a plastic aerator. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating members and manually operated diverter to shower outlet. Inlets incorporate approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate it provides adequate backflow protection). The spout outlet incorporates a plastic aerator. Maximum working pressure 5 bar. Maximum operating temperature 60°C
Wall mounted, exposed, bar type thermostatic shower mixing valve (chromium plated brass), incorporating a quarter turn ceramic disc headwork with dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Wall mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a quarter turn ceramic disc headwork with a dome type operating members and manually operated diverter to shower outlet. The temperature is controlled independently via a thermostatic cartridge and dome type operating member. The spout outlet incorporates a plastic aerator. Each inlet incorporates a stainless steel strainer and an approved single check valve cartridge, however, the complete unit has not been tested to demonstrate back flow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Wall mounted thermostatic blending valves incorporating a 2 way ceramic disc headwork with a dome type operating member controlling and diverting the flow between the spout outlet or the shower outlet. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed, thermostatic blending shower valves incorporating a ½ turn ceramic disc headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The 3663602665946 model has cube type operating members, the 3663602664956 model has dome type operating members. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Dual flush WC outlet valve incorporating a plastic body and silicon seal. The valve is operated by a cable linked push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.
Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-out spray type which incorporates a black nylon braided PEX lined flexible hose, and a manually operated button to divert between a plastic aerator and the spray function. The inlet hoses are supplied with a washer incorporating a stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork and single lever operating members. The product has a pull-out spray outlet which incorporates a plastic aerator and a self-closing trigger mechanism. Maximum working pressure 10 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and pull down spray. The inlet hoses incorporate a combined washer and stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of quarter turn ceramic disc headworks with brass bodies, NBR ‘O’-rings and plastic washers. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.
Range of quarter turn ceramic disc headworks with brass bodies, NBR ‘O’-rings and plastic washers. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.
Range of non-rising spindle headworks with brass bodies and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of non-rising spindle headworks with brass bodies and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of single hole, single outlet (swivel) combination tap assemblies incorporating a brass body (chrome, nickel or black finish) and ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of copper end feed fittings for use with copper tube. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Range of copper solder ring fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass or brushed gold PVD). Incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a rubber flow straightener. Maximum working pressure 5 bar. Maximum operating temperature 70°C
Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass or brushed gold PVD). Incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a rubber flow straightener. Maximum working pressure 10 bar. Maximum operating temperature 70°C.
Single hole, single outet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-down spray type incorporating a plastic flow regulator, a plastic flow straightener and a push button spray. The connection to the pull-down hose incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
‘EPH_WSP19’ Range of brass bodied fittings for use with copper pipe, some fittings are to be soldered with copper pipe (see models). Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.
A range of wall mounted two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a 2-way ceramic disc diverter headwork diverting between the spout outlet and a shower outlet. The temperature is controlled independently via a thermostatic cartridge with a manual override button. The spout outlet incorporates a plastic aerator. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, exposed bar type thermostatic shower blending valves (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member which controls both temperature and flow. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single-hole, single outlet (swivel) combination tap assembly (gold plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The product has a pull-out spray outlet which incorporates a plastic aerator and trigger mechanism that changes the water pattern for straight flow to spray. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes). Incorporating a ceramic cartridge or quarter turn ceramic disc headwork with a single lever or hand wheel operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Single hole, single outlet (swivel nozzle) tap (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed bar type thermostatic shower blending valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork with a single lever operating member which controls the flow and an independent thermostatic cartridge controlling the temperature with a single lever operating member. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of brass caplillary fittings for use with EN1057 copper tube. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
'Flomasta Qual-PEX Pipe'. Triple layered, extruded pipe consisting of a white coloured PEX inner & outer layer and a grey coloured EVOH middle layer. For use with water up to 85°C.
Range of single hole, single outlet (swivel) pull down spray combination tap assemblies (chromium plated brass) ceramic cartridge headworks with single lever operating members. The outlet incorporates a plastic aerator and a push button spray. stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Two-hole, single outlet (fixed) combination tap assembly with a brass body (chromium plated), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet is a waterfall design. The inlets incorporate plastic flow restrictors. The product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of stainless steel and ACB braided hoses with and EPDM liner and various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC. Hoses with plastic push fittings: maximum working pressure 6.0 bar. Maximum operating temperature 65ºC.
'Flomasta 7619J'. Off-white coloured, PTFE paste intended for use as a thread sealant. For use with water up to 23°C.
Range of stainless steel mini shock arrestors incorporating an EPDM membrane. Maximum working pressure 15 bar and maximum operating temperature 100°C
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed, thermostatic bar type shower mixing valves (chromium plated brass). The246PG model incorporates a 2-way ceramic disc diverter headwork with a dome type operating member controlling the flow between an overhead shower outlet and a shower handset. The 536PG model incorporates a quarter turn ceramic disc headwork with a dome type operating member controlling the flow to a shower handset. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member which incorporates a manual override button. Both inlets incorporate a combined EPDM washer and stainless-steel strainer, as well as an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Both products are supplied with a shower hose and handset, the B36264 model also includes a shower riser to an overhead shower outlet. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of stainless steel braided, EPDM lined flexible hose assemblies with captive nut inlet and push fit isolation valve outlet with brass balls. Maximum working pressure and temperature: 16.0 bar for cold water and 10.0 bar at 85°C.
Copper corrugated hose. Maximum working pressure 10.0 bar. Maximum working temperature 90°C.
Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Carbon block filter cartridge with plastic body. The cartridge may be installed with a manifold (filter head) for use with PE tubing manufactured to BS 1972. Maximum working pressure 8.6 bar. Cold water use only
Range of wall mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headworks with single lever operating member and self-cancelling diverter to shower outlet. The inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of floor mounted, single hole, single outlet fixed combination tap assemblies (chromium plated brass with a self-cancelling diverter to shower outlet. The product incorporates a ceramic cartridge headwork and single lever operating member. The spout outlets incorporate an aerator and the product is supplied with a hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Single hole, single outlet (swivel), combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout incorporates a push to open, push to close ‘detent’ headwork and the spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of drain taps incorporating brass bodies, EPDM seats and washers and a non-rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Y type fittings incorporating brass body and NBR washer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of stop valves with brass bodies and an EPDM washer. 15mm and 22mm for use with half-hard copper pipe of R250 acc. to EN1057. 20mm and 25mm for use with half hard copper pipe of R250 acc. to BS2871-2. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Page 1 of 2
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.