Combination Tap Assemblies

Section Code 0445 : Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.

Back To Directory Sections

#1904336

Range of single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork and single lever operating members. The product has a pull-out spray outlet which incorporates a plastic aerator and a self-closing trigger mechanism. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1904336
Expiry date:
30/04/2024
Size:
Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
Marking:
Gaoao logo on body
Installation Requirements:
R001 R006 R009 R010
Model:
ZA3244-6
Manufacturer:
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Company Name
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province
Country
China

View All Listings by this Company

Print This Approval


#1904350

Single hole, single outlet (swivel) combination tap assembly (brass body in various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member and a pull-out spray outlet with an interlocked stainless steel hose incorporating an EPDM liner. The pull-out spray handset incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1904350
Expiry date:
30/04/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Kind logo on operating member
Installation Requirements:
R001 R010 R090
Model:
JD-WK1084**. Where ‘**’ denotes finish, and can be replaced with: C - Chrome, P - Polished, R - Rose Gold, T - Zirconium gold, G - Titanium gold, L - Lead, PB - Gun black, RS - Rose gold brushed, TS - Zirconium gold brushed, GS - Titanium gold brushed, LS - Lead brushed, BS - Black brushed, NS - Nickel brushed, RM - Rose gold Matt Satin, TM - Zirconium Matt Satin, GM - Titanium Matt Satin, LM - Lead Matt Satin, BM - Black Matt Satin, NM - Nickel Matt Satin, B - Matt black, A - Antique Brass, RA - Antique Copper, YA - Yellow Antique Brass, ORB - Oil rubbed bronze, W - White Polished, BP - Black Polished, CB - Matt Black & Chrome, CW - White & Chrome, GB - Matt Black & Gold or GW - White & Gold.
Manufacturer:
Guangzhou Kind Architecture Material Technology Co., Ltd.
Company Name
Guangzhou Kind Architecture Material Technology Co., Ltd.
Address
Unit 8 No 1 Dashadi West Huangpu District
Country
Guangzhou

View All Listings by this Company

Print This Approval


#1906017

Range of deck mounted spout outlets (swivel) with pull-put spray. The spouts are stainless steel and incorporate a stainless-steel braided EPDM lined flexible hose assembly and a plastic aerator on the outlet. The inlet incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906017
Expiry date:
30/06/2024
Size:
3/8” BSP (M)
Marking:
CEA on base of spout
Installation Requirements:
R001 R090
Model:
FRE149 (spout) with H. 460 (pull-out spray). FRE143 (spout) with H. 415 (pull-out spray).
Factor:
CEA Design S.R.L
Company Name
CEA Design S.R.L
Address
Via A De Gasperi 48 36060
Country
Pianezze

View All Listings by this Company

Print This Approval


#1909096

Single hole, single outlet combination tap assemblies (chrome plated brass body) incorporating ceramic cartridge headwork with lever type operating member. The outlet incorporates a plastic aerator. The inlet hoses incorporate a single check valve verified by test (suitable for backflow protection against Fluid Category 2) (Maximum working pressure 5.5 bar. Maximum operating temperature 60ºC.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1909096
Expiry date:
30/09/2024
Size:
15mm compression
Marking:
Abode on operating member
Installation Requirements:
R001 R010 R090
Model:
Virtue Pull-out Spray
Factor:
Abode Home Products Ltd.
Company Name
Abode Home Products Ltd.
Address
Unit L Zenith Park Whaley Road
Postcode
S75 1HT
Country
Barnsley

View All Listings by this Company
Manufacturer:
Vicario Armando & C Srl
Company Name
Vicario Armando & C Srl
Address

View All Listings by this Company

Print This Approval


#1909355

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-out spray type which incorporates a black nylon braided PEX lined flexible hose, and a manually operated button to divert between a plastic aerator and the spray function. The inlet hoses are supplied with a washer incorporating a stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1909355
Expiry date:
30/09/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Gaoao on body
Installation Requirements:
R001 R009 R090
Model:
ZA3082
Factor:
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Company Name
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province
Country
China

View All Listings by this Company

Print This Approval


#1905366

Single hole, single outlet (swivel) combination tap assembly (brass body in various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member and a pull-out spray outlet with a stainless-steel interlocked EPDM lined flexible hose. The pull-out spray handset incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905366
Expiry date:
31/05/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Kind on operating member
Installation Requirements:
R001 R090
Model:
JD-WK1097**. ‘**’ denotes finish, and can be replaced with: C - Chrome, P - Polished, R - Rose Gold, T - Zirconium gold, G - Titanium gold, L - Lead, PB - Gun black, RS - Rose gold brushed, TS - Zirconium gold brushed, GS - Titanium gold brushed, LS - Lead brushed, BS - Black brushed, NS - Nickel brushed, RM - Rose gold Matt Satin, TM - Zirconium Matt Satin, GM - Titanium Matt Satin, LM - Lead Matt Satin, BM - Black Matt Satin, NM - Nickel Matt Satin, B - Matt black, A - Antique Brass, RA - Antique Copper, YA - Yellow Antique Brass, ORB - Oil rubbed bronze, W - White Polished, BP - Black Polished, CB - Matt Black & Chrome, CW - White & Chrome, GB - Matt Black & Gold or GW - White & Gold.
Manufacturer:
Guangzhou Kind Architecture Material Technology Co., Ltd.
Company Name
Guangzhou Kind Architecture Material Technology Co., Ltd.
Address
Unit 8 No 1 Dashadi West Huangpu District
Country
Guangzhou

View All Listings by this Company

Print This Approval


#1910033

Two-hole, single outlet combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull-out spray type (chromium plated plastic) and incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910033
Expiry date:
31/10/2024
Size:
Stainless steel braided EDPM lined flexible hose assemblies incorporating 15mm compression end connections.
Marking:
Orfesa logo on rear of body.
Installation Requirements:
R001 R090
Model:
PL-327 & PL-32
Manufacturer:
Orfesa S.A.
Company Name
Orfesa S.A.
Address
C/Feixa Llarga, 54 08907 L'Hospitalet de Llobregat Barcelona
Country
Spain

View All Listings by this Company

Print This Approval


#1911311

Single hole, single outet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-down spray type incorporating a plastic flow regulator, a plastic flow straightener and a push button spray. The connection to the pull-down hose incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1911311
Expiry date:
30/11/2024
Size:
Grey polymeric (PET - Polyethylene terephthalate) braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R090
Model:
187008 BC
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval


#1909407

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-out spray type which incorporates a black nylon braided PEX lined flexible hose, and a manually operated button to divert between a plastic aerator and the spray function. The inlet hoses are supplied with a washer incorporating a stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1909407
Expiry date:
30/09/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Cooke & Lewis on tap body
Installation Requirements:
R001 R009 R090
Model:
3663602792116 combination tap assembly
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1904370

Range of single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork and single lever operating members. The product has a pull-out spray outlet which incorporates a plastic aerator and a self-closing trigger mechanism. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1904370
Expiry date:
30/04/2024
Size:
Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
Marking:
Gaoao on body
Installation Requirements:
R001 R006 R009 R010
Model:
3663602799849 COMBINATION TAP ASSEMBLIES – PULL OUT SPRAY
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company
Manufacturer:
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Company Name
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province
Country
China

View All Listings by this Company

Print This Approval


#2007806

Single hole single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic flow aerator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007806
Expiry date:
31/07/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
PPI on rear of body
Installation Requirements:
R001 R090
Model:
907015
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval


#2007808

Single hole single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic flow aerator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007808
Expiry date:
31/07/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
TP ON BASE
Installation Requirements:
R001 R090
Model:
546885
Factor:
Travis Perkins Plc
Company Name
Travis Perkins Plc
Address
Divisional Office Lakeside House Bedford
Postcode
NN4 7HD
Country
Northhampton
Phone
+44 (0) 1604 503457

View All Listings by this Company

Print This Approval


#2001103

Range of single hole, single outlet (swivel) pull down spray combination tap assemblies (chromium plated brass) with ¼ turn ceramic disc headworks (62861-0101 model) or ceramic cartridge headworks (all other models) with single lever operating members. The outlet incorporates a plastic aerator and a push button spray. The connection between the outlet and the hose of the 62861-0101 model incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides adequate backflow protection. The inlet hoses incorporate a combined rubber washer and stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001103
Expiry date:
31/01/2025
Size:
Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
Marking:
LOTA on rear of tap body.
Installation Requirements:
R001 R006 R009 R010
Model:
62931-0001, 62932-0001, 62861-0101.
Manufacturer:
Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen, 361022
Country
China

View All Listings by this Company

Print This Approval


#2001104

Single hole, single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The outlet incorporates a plastic aerator and a push button spray. The connection between the outlet and the hose incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides adequate backflow protection. The inlet hoses incorporate a combined rubber washer and stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001104
Expiry date:
31/01/2025
Size:
Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
Marking:
LOTA on rear of tap body.
Installation Requirements:
R001 R009 R090
Model:
62862-0301.
Manufacturer:
Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen, 361022
Country
China

View All Listings by this Company

Print This Approval


#2007314

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks and single lever operating member. The flexible spout outlet incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007314
Expiry date:
31/07/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections
Marking:
DTC25 on rear of body. DEVA on front of the body.
Installation Requirements:
R001 R090
Model:
BDG104 – Bridgewater Flexi sink mixer.
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#1911358

Single hole, single outet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-down spray type incorporating a plastic flow regulator, a plastic flow straightener and a push button spray. The connection to the pull-down hose incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1911358
Expiry date:
30/11/2024
Size:
Grey polymeric (PET - Polyethylene terephthalate) braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Kingfisher good home logo & date of manufacture mm/yyyy on body.
Installation Requirements:
R001 R090
Model:
3663602481874 Gevuina (Black Chrome) COMBINATION TAP ASSEMBLY
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2005321

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating a pull out spray with push button trigger assembly and dome type operating member. The pull out spray also incorporates a single check valve assembly (however the complete unit has not been tested to demonstrate it provides adequate backflow protection). The outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2005321
Expiry date:
31/05/2025
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections
Marking:
Grohe logo, design and engineering, Grohe Germany, date of manufacture (YYMM) Grohe ID made in label on body.
Installation Requirements:
R001 R009 R090
Model:
Grohe ‘Minta Smart Control’ sink mixers with L-spout and pull-out spray: 31.613. 31.613.A00 (hard graphite). 31.613.AS0 (satin black). 31.613.DA0 (Warm Sunset). 31.613.DC0 (supersteel). Grohe ‘Messence Smart Control’ sink mixers with L-spout and pull-out spray: 31.615. 31.615.A00 (hard graphite). 31.615.AL0 (brushed hard graphite). 31.615.AS0 (satin black). 31.615.BE0 (polished nickel). 31.615.DA0 (Warm Sunset). 31.615.DC0 (supersteel). 31.615.DL0 (brushed warm sunset). Grohe ‘Zedra Smart Control’ sink mixers with L-spout and pull-out spray: 31.593.002. 31.593.DC2 (supersteel).
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Country
Germany
Phone
02372 930

View All Listings by this Company

Print This Approval


#2007385

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks and single lever operating member. The flexible spout outlet incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007385
Expiry date:
31/07/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections
Marking:
DTC25 (brand of Methven) & Methven on body.
Installation Requirements:
R001 R090
Model:
HASMCP COMBINATION TAP ASSEMBLIES
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2011303

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headworks and single lever operating members, with a pull out spray retained within a holster. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011303
Expiry date:
30/11/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
Deva on front of body. DTC25 (brand of Methven) on rear of body
Installation Requirements:
R001 R006 R010
Model:
ABN104 Abingdon. Model added September 2023 BRG104
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2011304

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). incorporating a ceramic cartridge and single lever operating member with a spring loaded, pull down trigger operated spray. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011304
Expiry date:
30/11/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
Deva on front of body. DTC25 (brand of Methven) on rear of body.
Installation Requirements:
R001 R090
Model:
SPR104 – Spring. Model added September 2021: SLINKY218
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2101351

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The product incorporates a pull-out spout with a plastic aerator, which also incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2101351
Expiry date:
31/01/2026
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Gessi on operating member.
Installation Requirements:
R001 R009 R090
Model:
60077
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Country
Italy
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2101361

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The product incorporates a pull-out spout outlet with a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2101361
Expiry date:
31/01/2026
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Franke on operating member.
Installation Requirements:
R001 R007 R009 R090
Model:
Orbit: 115.0623.055 (Chrome). 115.0623.057 (Onyx). 115.0623.059 (Coffee). 115.0623.134 (Graphite). 115.0623.136 (Oatmeal). 115.0623.139 (Polar white). 115.0623.141 (Stone grey). 115.0623.147 (Oyster).
Factor:
Franke Kitchen System Ltd
Company Name
Franke Kitchen System Ltd
Address
Franke Strasse 2 CH-4663 Aarburg
Country
Switzerland

View All Listings by this Company
Manufacturer:
Xiamen Solex High-Tech Industries Co., Ltd
Company Name
Xiamen Solex High-Tech Industries Co., Ltd
Address
No. 298 Yangguang Road West Xinyang Industrial Zone Haicang District Xiamen, Fujian
Country
China

View All Listings by this Company

Print This Approval


#2012064

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a pull-out spray with plastic aerator. The cold Inlet incorporates approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012064
Expiry date:
31/12/2025
Size:
½” BSP (F) on cold inlet, stainless steel braided PE-X lined flexible hose assembly with ½” captive nut on hot inlet.
Marking:
Lota on side of body.
Installation Requirements:
R001 R006 R009 R010 R090
Model:
63261-0001 Chrome 63261-0004 Brushed Nickel 63261-006801 Kitchen Mixer Matt Black 63261-004408 Brushed Brass 63268-0001 Chrome 63268-0004 Brushed Nickel 63268-016801 Matt Black 63268-004408 Brushed Brass
Manufacturer:
Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen, 361022
Country
China

View All Listings by this Company

Print This Approval


#2104055

Range of deck mounted combination tap assemblies (chromium plated brass) incorporating rising spindle headwork with single lever operating members, swivel spout outlet and separate pull-down spray outlet (with self-closing trigger assembly). The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Models 98008-M001 & 98008-1 are single hole, single outlet. Model 98007-1 is two-hole, single outlet. Model 98001-2 is single hole, double outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2104055
Expiry date:
30/04/2026
Note:
R006 applies to the swivel spout outlet. R090 applies to the pull-down spray outlet.
Marking:
TOP-RINSE and WRAS on Body
Installation Requirements:
R001 R006 R090
Model:
½” BSP (M): models 98008-M001 & 98008-1. ½” BSP (F): model 98007-1. M10: model 98001-2.
Manufacturer:
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Company Name
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Address
Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang
Country
China
Phone
+86-576-87121119

View All Listings by this Company

Print This Approval


#2104056

Range of wall mounted combination tap assemblies (chromium plated brass) incorporating rising spindle headwork with single lever operating members, swivel spout outlet and separate pull-down spray outlet (with self-closing trigger assembly). The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Model 98011-1 is single hole, single outlet. Models 98002-1 & 98002-M001 are two-hole, single outlet. Model 98002MN-2 is two-hole, double outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2104056
Expiry date:
30/04/2026
Note:
R040 applies to the swivel spout outlet. R090 applies to the separate pull-down spray outlet.
Marking:
TOP-RINSE and WRAS on Body
Installation Requirements:
R001 R040 R090
Model:
½” BSP (M): 98011-1. ½” BSP (F): 98002MN-2, 98002-M001, 98002-1
Manufacturer:
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Company Name
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Address
Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang
Country
China
Phone
+86-576-87121119

View All Listings by this Company

Print This Approval


#2012095

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a pull-out spray with plastic aerator. The cold Inlet incorporates approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012095
Expiry date:
31/12/2025
Size:
½” BSP (F) on cold inlet, stainless steel braided PE-X lined flexible hose assembly with ½” captive nut on hot inlet.
Marking:
Clearwater on body.
Installation Requirements:
R001 R006 R009 R010 R090
Model:
ROL10CP, ROL10BN, ROL10MB, ROL10BB, PIL40CP, PIL40BN, PIL40MB & PIL40BB COMBINATION TAP ASSEMBLIES
Factor:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Country
United Kingdom
Phone
0168429955

View All Listings by this Company

Print This Approval


#2001150

Range of single hole, single outlet (swivel) pull down spray combination tap assemblies (chromium plated brass) ceramic cartridge headworks with single lever operating members. The outlet incorporates a plastic aerator and a push button spray. stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001150
Expiry date:
31/01/2025
Size:
Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
Marking:
Watersmith on rear of tap body.
Installation Requirements:
R001 R006 R009 R010
Model:
8745P & 9863P COMBINATION TAP ASSEMBLIES
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2001151

Single hole, single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The outlet incorporates a plastic aerator and a push button spray. The connection between the outlet and the hose incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides adequate backflow protection. The inlet hoses incorporate a combined rubber washer and stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001151
Expiry date:
31/01/2025
Size:
Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
Marking:
Watersmith on rear of tap body.
Installation Requirements:
R001 R009 R090
Model:
4065P (PULL-OUT SPRAY) COMBINATION TAP ASSEMBLY
Factor:
Watersmith (UK) Ltd.
Company Name
Watersmith (UK) Ltd.
Address
Trade House, Mead Avenue, Yeovil
Postcode
BA22 8RT
Phone
01935 401680

View All Listings by this Company

Print This Approval


#2105004

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member and pull out spray. The spout outlet incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2105004
Expiry date:
31/05/2026
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP captive nut end connections.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R090
Model:
907023
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval


#2104015

Single hole, single outlet (swivel), combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with single lever operating member. The product incorporates a pull-out spout outlet with a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2104015
Expiry date:
30/04/2026
Size:
M10 (F).
Marking:
QIXI and WRAS on body.
Installation Requirements:
R001 R090
Model:
SH-T81010
Manufacturer:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Country
China
Phone
189 685 872 326

View All Listings by this Company

Print This Approval


#2107071

Range of wall mounted, two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disk headwork with a single lever operating member. The product incorporates a hand held pre-rinse spray with a self-closing trigger on a flexible hose within an overhead spring. Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. The inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107071
Expiry date:
31/07/2026
Size:
½" BSP (M)
Marking:
T & S On Operating member. T & S On Spray body. T & S BRASS and WRAS On Hose connector. T & S On spout.
Installation Requirements:
R001 R010 R040
Model:
UMPK-8WLN-00. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06 or 08 = spout length in inches. E.g. UMPK-8WLN-08 for a 8” spout.
Manufacturer:
T&S Brass and Bronze Works, Inc
Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Country
United States
Phone
1-800-868-0084

View All Listings by this Company

Print This Approval


#2107094

Range of wall mounted, two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disk headworks with single lever operating members. The product incorporates a hand held pre-rinse spray with a self-closing trigger, either on a flexible hose within an overhead spring or as a fixed length flexible hose on a swivel arm (see model). Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. Each inlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107094
Expiry date:
31/07/2026
Size:
½” BSP (M)
Marking:
T&S on operating member and spray valve body. WRAS on hose ferrule of pre-rinse spray.
Installation Requirements:
rR001 R010 R040
Model:
Pre-rinse spray and overhead spring: UK-8WP00-L-EE. Pre-rinse on fixed length swivel arm: UK-8WP00-LA-EE. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06, 08, 10 or 12 = spout length in inches. E.g. UK-8WP10-LA-EE for a 10” spout.
Manufacturer:
T&S Brass and Bronze Works, Inc
Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Country
United States
Phone
1-800-868-0084

View All Listings by this Company

Print This Approval


#2107097

Range of deck mounted, single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disk headwork with a single lever operating member. The product incorporates a hand held pre-rinse spray with a self-closing trigger, either on a flexible hose within an overhead spring or as a fixed length flexible hose on a swivel arm (see model). Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. The product is supplied with metal backnuts. UK-1DPXX models only are a single feed and come with an optional ½” NPSM (M) x ½” BSP (F) brass adapter. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107097
Expiry date:
31/07/2026
Note:
R010 applies to the UK-2DP00 models only.
Size:
UK-1DP00 models: ½” NPS (M). UK-2DP00 models: M10 (F).
Marking:
T&S on operating member and spray valve body. WRAS on hose ferrule of pre-rinse spray.
Installation Requirements:
R001 R006 R010
Model:
Pre-rinse spray and overhead spring: UK-1DP00, UK-1DP00-J, UK-1DP00-L. Pre-rinse on fixed length swivel arm: UK-1DP00-A, UK-1DP00-JA, UK-1DP00-LA. Pre-rinse spray and overhead spring: UK-2DP00, UK-2DP00-J, UK-2DP00-L. Pre-rinse on fixed length swivel arm: UK-2DP00-A, UK-2DP00-JA, UK-2DP00-LA. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06, 08, 10 or 12 = spout length in inches. E.g. UK-1DP10-LA for a 10” spout.
Manufacturer:
T&S Brass and Bronze Works, Inc
Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Country
United States
Phone
1-800-868-0084

View All Listings by this Company

Print This Approval


#2107063

Range of deck mounted, single hole or two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating one (UMPM-1DLN-00 model only) or two quarter turn ceramic disk headworks with single lever operating members. The product incorporates a hand held pre-rinse spray with a self-closing trigger on a flexible hose within an overhead spring. Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. The UMPM-1DLN-00 model is a single feed and comes with an optional ½” NPSM (M) x ½” BSP (F) brass adapter. The UMPM-2DLN-00 model is supplied with two ½” BSP (F) x ½” BSP (M) single check assemblies (suitable for backflow protection against Fluid category 2), for installation on each inlet hose. The inlets on the UMPM-6DLN-00 & UMPM-7DLN- 00 models incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107063
Expiry date:
31/07/2026
Note:
R009 applies to the UMPM-2DLN-00 model. R010 applies to UMPM-6DLN-00 & UMPM-7DLN-00 models only.
Size:
UMPM-1DLN-00: ½” NPS (M). UMPM-2DLN-00: Polyamide (PA) braided PEX lined flexible hose assemblies with ½” BSP (M) end connections. UMPM-6DLN-00 & UMPM-7DLN-00: ½” BSP (M).
Marking:
T & S on operating member. T & S on spray body. T & S BRASS and WRAS on rinse spray hose connector. T & S on spout (UMPM-2DLN-00 & UMPM-6DLN-00 models only).
Installation Requirements:
R001 R006 R009 R010
Model:
Single hole: UMPM-1DLN-00. UMPM-2DLN-00. Two hole: UMPM-6DLN-00. UMPM-7DLN-00. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06 or 08 = spout length in inches. E.g. UMPM-1DLN-08 for a 8” spout.
Manufacturer:
T&S Brass and Bronze Works, Inc
Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Country
United States
Phone
1-800-868-0084

View All Listings by this Company

Print This Approval


#2107064

Range of wall mounted, two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disk headworks with single lever operating members. The product incorporates a hand held pre-rinse spray with a self-closing trigger on a flexible hose within an overhead spring. Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. The inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107064
Expiry date:
31/07/2026
Marking:
T & S on operating member. T & S and WRAS on rinse spray hose connector. T & S BRASS on spray body.
Installation Requirements:
R001 R010 R040
Model:
UMPM-8WLN-00. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06 or 08 = spout length in inches. E.g. UMPM-8WLN-08 for a 8” spout.
Manufacturer:
T&S Brass and Bronze Works, Inc
Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Country
United States
Phone
1-800-868-0084

View All Listings by this Company

Print This Approval


#2107070

Range of deck mounted, single hole or two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating one (UMPK-1DLN-00 model only) or two quarter turn ceramic disk headworks with single lever operating members. The product incorporates a hand held pre-rinse spray with a self-closing trigger on a flexible hose within an overhead spring. Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. The UMPK-1DLN-00 model is a single feed and comes with an optional ½” NPSM (M) x ½” BSP (F) brass adapter. The UMPK-2DLN-00 model is supplied with two ½” BSP (F) x ½” BSP (M) single check assemblies (suitable for backflow protection against Fluid category 2), for installation on each inlet hose. The inlets on the UMPK-6DLN-00 & UMPK-7DLN-00 models incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107070
Expiry date:
31/07/2026
Note:
R009 applies to the UMPK-2DLN-00 model. R010 applies to UMPK-6DLN-00 & UMPK-7DLN-00 models only.
Size:
UMPK-1DLN-00: ½” NPS (M). UMPK-2DLN-00: Stainless steel braided PEX lined flexible hose assemblies with ½” BSP (M) end connections. UMPK-6DLN-00 & UMPK-7DLN-00: ½” BSP (M).
Marking:
T & S on operating member. T & S on spray body. T & S BRASS and WRAS on rinse spray hose connector. T & S on spout (UMPK-2DLN-00 & UMPK-6DLN-00 models only).
Installation Requirements:
R001 R006 R009 R010
Model:
Single hole: UMPK-1DLN-00. UMPK-2DLN-00. Two hole: UMPK-6DLN-00. UMPK-7DLN-00. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06 or 08 = spout length in inches. E.g. UMPK-1DLN-08 for a 8” spout.
Manufacturer:
T&S Brass and Bronze Works, Inc
Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Country
United States
Phone
1-800-868-0084

View All Listings by this Company

Print This Approval


#2107080

Range of deck mounted, two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disk headworks with single lever operating members. The product incorporates a hand held pre-rinse spray with a self-closing trigger, either on a flexible hose within an overhead spring or as a fixed length flexible hose on a swivel arm (see model). Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. The inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107080
Expiry date:
31/07/2026
Size:
½” BSP (M)
Marking:
T & S on top of operating member and T & S brass on trigger spray mechanism
Installation Requirements:
R001 R006 R010
Model:
Pre-rinse spray and overhead spring: UK-6DP00. UK-6DP00-J. UK-6DP00-L. UK-7DP00. UK-7DP00-J. UK-7DP00-L. Pre-rinse on fixed length swivel arm: UK-6DP00A. UK-6DP00-JA. UK-6DP00-LA. UK-7DP00A. UK-7DP00-JA. UK-7DP00-LA. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06, 08, 10 or 12 = spout length in inches. E.g. UK-6DP08 for a 8” spout.
Manufacturer:
T&S Brass and Bronze Works, Inc
Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Country
United States
Phone
1-800-868-0084

View All Listings by this Company

Print This Approval


#2107099

Range of deck mounted, single hole (UMPU-1DLN-00 & UMPU-2DLN-00 models) or two hole (UMPU-6DLN-00 & UMPU-7DLN-00 models), single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating one (UMPU-1DLN-00 model only) or two quarter turn ceramic disk headworks with single lever operating members. The product incorporates a hand held pre-rinse spray with a self-closing trigger on a flexible hose within an overhead spring. Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. The UMPU-1DLN-00 model is a single feed and comes with an optional ½” NPSM (M) x ½” BSP (F) brass adapter. The UMPU-2DLN-00 model is supplied with two ½” BSP (F) x ½” BSP (M) single check assemblies (suitable for backflow protection against Fluid category 2), for installation on each inlet hose. The inlets on the UMPU-6DLN-00 & UMPU-7DLN-00 models incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107099
Expiry date:
31/07/2026
Note:
R009 applies to the UMPU-2DLN-00 model. R010 applies to UMPU-6DLN-00 & UMPU-7DLN-00 models only.
Size:
UMPU-1DLN-00: ½” NPS (M). UMPU-2DLN-00: Stainless steel braided PEX lined flexible hose assemblies with ½” BSP (M) end connections. UMPU-6DLN-00 & UMPU-7DLN-00: ½” BSP (M).
Marking:
T & S on operating member. T & S on spray body. T & S BRASS and WRAS on rinse spray hose connector. T & S on spout (where one is present).
Installation Requirements:
R001 R006 R009 R010
Model:
UMPU-1DLN-00. UMPU-2DLN-00. UMPU-6DLN-00. UMPU-7DLN-00. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06 or 08 = spout length in inches. E.g. UMPU-1DLN-08 for a 8” spout.
Manufacturer:
T&S Brass and Bronze Works, Inc
Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Country
United States
Phone
1-800-868-0084

View All Listings by this Company

Print This Approval


#2107100

Range of wall mounted, single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disk headwork with a single lever operating member. The product incorporates a hand held pre-rinse spray with a self-closing trigger on a flexible hose within an overhead spring. Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. The inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107100
Expiry date:
31/07/2026
Size:
½" BSP (M)
Marking:
T & S on operating member. T & S on spray body. T & S BRASS and WRAS on rinse spray hose connector. T & S on spout (where one is present).
Installation Requirements:
R001 R010 R040
Model:
UMPU-8WLN-00. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06 or 08 = spout length in inches. E.g. UMPU-1DLN-08 for a 8” spout.
Manufacturer:
T&S Brass and Bronze Works, Inc
Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Country
United States
Phone
1-800-868-0084

View All Listings by this Company

Print This Approval


#2107112

Range of wall mounted, two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disk headworks with single lever operating members. The product incorporates a hand held pre-rinse spray with a self-closing trigger, either on a flexible hose within an overhead spring or as a fixed length flexible hose on a swivel arm (see model). Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. Each inlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with plastic backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107112
Expiry date:
31/07/2026
Size:
½” BSP (M)
Marking:
T&S on operating member and spray valve body. WRAS on hose ferrule of pre-rinse spray.
Installation Requirements:
R001 R010 R040
Model:
Pre-rinse spray and overhead spring: UK-8WP00-EE, UK-8WP00-J-EE. Pre-rinse on fixed length swivel arm: UK-8WP00-A-EE, UK-8WP00-JA-EE. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06, 08, 10 or 12 = spout length in inches. E.g. UK-8WP10-JA-EE for a 10” spout.
Manufacturer:
T&S Brass and Bronze Works, Inc
Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Country
United States
Phone
1-800-868-0084

View All Listings by this Company

Print This Approval


#2107060

Single-hole single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member and a pull-out spray. The pull-out spray hose is stainless steel braided and has a. The pull-out spray outlet incorporates a button which changes and/or stops the flow of water, a plastic aerator and check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107060
Expiry date:
31/07/2026
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
LOTA on base of body
Installation Requirements:
R001 R009 R090
Model:
62871-0001
Manufacturer:
Xiamen Lota International Co. Ltd.
Company Name
Xiamen Lota International Co. Ltd.
Address
No 61 Xingnan Road Jimei District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval


#2107328

Range of single hole, single outlet (swivel) pull down spray combination tap assemblies (brass bodies - various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The connection between the body and the spout incorporates an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The outlet incorporates a plastic aerator. The products are supplied with optional ½” BSP (F) x ⅜ BSP (M) brass adaptors and NBR washers for installation on each inlet hose. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107328
Expiry date:
31/07/2026
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ⅜” captive nut end connections.
Marking:
Comap on body.
Installation Requirements:
R001
Model:
Jeroni Chef Range: 922138 (Chrome Body/Black Spout). 922139 (Brushed Nickel Body/Black Spout). 922140 (White Body/Grey Spout). 922141 (Black Body / Black Spout). 922145 (Gun Metal Bdy/Black Spout). 922146 (Antique Brass Body/Black Spout). 922147 (Copper Body / Black Spout).
Factor:
StH Westco Ltd
Company Name
StH Westco Ltd
Address
Unit C6 William Way Moss Industrial Estate St Helens Road Leigh
Postcode
WN7 3PT
Country
United Kingdom
Phone
01942 265230

View All Listings by this Company

Print This Approval


#2109364

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headworks with single lever operating members and pull-down spray handset. The spout outlet incorporates a plastic aerator. The product is supplied with a metal backnut. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2109364
Expiry date:
30/09/2026
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
DTC15 on rear of body. Deva on operating member.
Installation Requirements:
R001 R009 R090
Model:
SLINKY118 slinky mono sink mixer
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2112019

A range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (chrome plated), incorporating a ceramic cartridge headwork (models 63465-0001) or a quarter turn ceramic disc headwork (model 63461-0001) with single lever operating members. The products incorporate a pull-out spray with a plastic aerator at the outlet. The pull-out spray hose for model 63465-0001 incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum working temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2112019
Expiry date:
31/12/2026
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” BSP captive nut end connection.
Marking:
Lota on body
Installation Requirements:
R001 R006 R009 R010
Model:
63461-0001 63465-0001
Manufacturer:
Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen, 361022
Country
China

View All Listings by this Company

Print This Approval


#2111360

Single hole, single outlet (swivel) combination tap assembly (chrome plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and pull out spray handset. The outlet hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2111360
Expiry date:
30/11/2026
Size:
Stainless steel braided, EPDM lined flexible hose assemblies incorporating ½” BSP (F) end connections.
Marking:
DTC25 (brand of Methven) on rear of body. Methven on front of body.
Installation Requirements:
R001 R090
Model:
DUSMCP – Dunston Flexi Sink Mixer Model added October 2023: INST-MCP-2HKM
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2112020

Single hole, single outlet (swivel) combination tap assembly with brass bodies (chrome plated), incorporating a ceramic cartridge headwork with single lever operating members. The product incorporates a pull-out spray with a plastic aerator at the outlet. The pull-out spray hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum working temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2112020
Expiry date:
31/12/2026
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating ½” BSP captive nut end connection.
Marking:
Lota on body
Installation Requirements:
R001 R009 R090
Model:
63395-0201
Manufacturer:
Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen, 361022
Country
China

View All Listings by this Company

Print This Approval


#2107335

Range of single hole, single outlet (swivel) pull down spray combination tap assemblies (brass bodies - various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The connection between the body and the spout incorporates an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The outlet incorporates a plastic aerator. The products are supplied with optional ½” BSP (F) x ⅜ BSP (M) brass adaptors and NBR washers for installation on each inlet hose. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107335
Expiry date:
31/07/2026
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ⅜” captive nut end connections.
Marking:
Instinct on rear of tap body.
Installation Requirements:
R001
Model:
4E1412 - Soyea Chef Chrome Body/Black Spout 4E1423CO - Soyea Chef Brushed Nickel Body/Black Spout 4E1424CO - Soyea Chef White Body/Grey Spout 4E1425CO - Soyea Chef Black Body / Black Spout
Factor:
StH Westco Ltd
Company Name
StH Westco Ltd
Address
Unit C6 William Way Moss Industrial Estate St Helens Road Leigh
Postcode
WN7 3PT
Country
United Kingdom
Phone
01942 265230

View All Listings by this Company

Print This Approval


#2201006

Range of four-hole, single outlet (swivel) combination tap assemblies (brass bodies, chrome plated or brushed steel finish) with a spout outlet and flexible hand spray outlet. The hot water is controlled to the spout outlet only (not to the spray outlet) via a quarter turn ceramic disc headwork with single lever operating member. The cold water to the spout outlet and trigger-operated spray outlet is controlled and diverted via a ceramic disc diverter headwork. The product is supplied with Stainless steel braided EPDM lined flexible hose assemblies for connection between the headworks and spout. The spout outlet incorporates a plastic aerator and the products are supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201006
Expiry date:
31/01/2027
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections
Marking:
1810 on trigger spray operating member.
Installation Requirements:
R001 R090
Model:
NOV/01/CH & NOV/02/BS
Factor:
The 1810 Company limited
Company Name
The 1810 Company limited
Address
Units 14-16, Bromfield Industrial Estate, Queens Lane Mold
Postcode
CH7 1JR
Phone
0044 7772144600

View All Listings by this Company

Print This Approval


#2112352

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The product incorporates a pull-down spout with a plastic aerator, which also incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with optional ⅜” BSP (M) x ½” BSP (F) adaptors each with two fibre gaskets for installation on each inlet hose. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2112352
Expiry date:
31/12/2026
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Gessi on operating member.
Installation Requirements:
R001 R006 R009 R010
Model:
60010, 60012, 60014.
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Country
Italy
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2112900

Single-hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a pull-out spray with a plastic aerator. Both inlet adaptor connections and the hand-spray inlet incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate that they provide back flow protection. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2112900
Expiry date:
31/12/2026
Size:
Stainless steel braided PEX lined flexible hoses with ½” BSP (F) captive nut end connections.
Marking:
Bristan on operating member.
Installation Requirements:
R001 R009 R010 R090
Model:
LQR PROSNK C
Factor:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

Print This Approval


#2203302

Single-hole, single outlet (swivel) combination tap assembly with brass body (chrome plated), incorporating a ceramic cartridge headwork with a single lever operating member. The product has a pull-out spray outlet which incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection The cold inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2203302
Expiry date:
31/03/2027
Size:
Stainless-steel braided, EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
SMR on operating member
Installation Requirements:
R001 R010 R090
Model:
All in one pull out
Factor:
San Marco Rubinetteria Srl
Company Name
San Marco Rubinetteria Srl
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Country
Italy
Phone
+39 15765 5244
General Email
info@sanmarcotaps.com

View All Listings by this Company

Print This Approval


#2204314

Single hole, single outlet (swivel) combination tap assembly, (Chrome plated) brass body incorporating a ceramic cartridge headwork with a single lever operating member. The product incorporates a pull out spray. The cold inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2204314
Expiry date:
30/04/2027
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
Franke on operation member.
Installation Requirements:
R001 R010 R090
Model:
FUJI PULL OUT
Factor:
Franke UK Ltd.
Company Name
Franke UK Ltd.
Address
West Park, MIOC, Styal Road, Manchester
Postcode
M22 5WB
Country
United Kingdom
Phone
0161 4360280

View All Listings by this Company

Print This Approval


#2007809

Single hole single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic flow aerator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007809
Expiry date:
31/07/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
IFLO ON TAP BODY
Installation Requirements:
R001 R090
Model:
907015
Factor:
CITY PLUMBING SUPPLIES HOLDINGS LTD
Company Name
CITY PLUMBING SUPPLIES HOLDINGS LTD
Address
HIGHBOURNE GROUP LTD HIGHBOURNE HOUSE ELDON WAY NORTHHAMPTONSHIRE
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


#2205314

Two-hole, single outlet combination tap assembly with stainless steel body incorporating a ceramic cartridge headworks with lever operating members and a pull-out handset.. The spout inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates plastic aerator Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2205314
Expiry date:
31/05/2027
Size:
Stainless-steel braided, PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Comfortel on body of hand shower.
Installation Requirements:
R001 R007 R009 R090
Model:
10513
Factor:
Comfortel
Company Name
Comfortel
Address
10/126-134 Fairbank Road Clayton South VIC 3109
Country
Australia
Phone
+61 3 8581 8111

View All Listings by this Company
Manufacturer:
Huate Sanitary Ware Co., Ltd.
Company Name
Huate Sanitary Ware Co., Ltd.
Address
B, Dongxi Industrial Zone Zhishan Town Heshan City Guangdong Province
Country
China

View All Listings by this Company

Print This Approval


#2203346

Single hole, single outlet (swivel) combination tap assemblies with brass body (chrome plated), incorporating a ceramic cartridge headworks with single leaver operating members. The spout outlet is a pull-down spray type incorporating a plastic aerator and a push button. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2203346
Expiry date:
31/03/2027
Size:
Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
SMR on operating member
Installation Requirements:
R001 R090
Model:
ALVO PROFESSIONAL
Factor:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road
Postcode
S75 1HT
Country
Barnsley
Phone
01226 283434
General Email
pillingworth@abodedesigns.co.uk

View All Listings by this Company
Manufacturer:
San Marco Rubinetteria Srl
Company Name
San Marco Rubinetteria Srl
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Country
Italy
Phone
+39 15765 5244
General Email
info@sanmarcotaps.com

View All Listings by this Company

Print This Approval


#2201321

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic disc headworks and single lever operating members. The cold inlet to the tap incorporates incorporates an approved check valve cartridge which has been verified by test (as suitable for backflow protection against Fluid Category 2). The inlet of hose to the pull-out spray incorporates an approved check valve cartridge which has not been fully tested to demonstrate it provides backflow protection. The outlet of pull-out spray incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201321
Expiry date:
31/01/2027
Size:
Stainless steel braided, PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Lota on body
Installation Requirements:
R001 R009 R010 R090
Model:
63433-00X 63433-01X 63433-03X X denotes finish and can be replaced with: 01 - Chrome 04 - Brushed Nickel 08 - Stainless steel 4408 - Brushed Brass 6801 - Matt Black 5804 - Heirloom Silver 0402 - Brushed Nickel PVD
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Country
China
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#2201328

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic disc headworks and single lever operating members. The cold inlet to the tap incorporates incorporates an approved check valve cartridge which has been verified by test (as suitable for backflow protection against Fluid Category 2). The inlet of hose to the pull-out spray incorporates an approved check valve cartridge which has not been fully tested to demonstrate it provides backflow protection. The outlet of pull-out spray incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201328
Expiry date:
31/01/2027
Size:
Stainless-steel braided PEX line flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
Lota on body.
Installation Requirements:
R001 R009 R010 R090
Model:
63435-00X Pull out Kitchen mixer 63437-01X Pull out Kitchen mixer 63442-00X Pull out Kitchen mixer 63440-00X Kitchen mixer 63440-01X Kitchen mixer X denotes finish and can be replaced: 01 - Chrome 04 - Brushed Nickel 08 - Stainless steel 4408 - Brushed Brass 6801 - Matt Black 5804 - Heirloom Silver 0402 - Brushed Nickel PVD
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Country
China
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#2201351

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic disc headworks and single lever operating members. The cold inlet to the tap incorporates incorporates an approved check valve cartridge which has been verified by test (as suitable for backflow protection against Fluid Category 2). The inlet of hose to the pull-out spray incorporates an approved check valve cartridge which has not been fully tested to demonstrate it provides backflow protection. The outlet of pull-out spray incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201351
Expiry date:
31/01/2027
Size:
Stainless-steel braided PEX line flexible hose assemblies incorporating ½” BSP captive nut end connections
Marking:
Clearwater on body.
Installation Requirements:
R001 R009 R090
Model:
LEV20CP, LEV20BN, LEV20BB, LEV20MB, SAN20CP, SAN20BN, SAN20BB, SAN20MB, SAN20SS, KAR20CP, KAR20BN, KAR20BB, KAR20MB & KAR20SS Kitchen mixer
Factor:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Country
United Kingdom
Phone
0168429955

View All Listings by this Company

Print This Approval


#2201352

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic disc headworks and single lever operating members. The cold inlet to the tap incorporates incorporates an approved check valve cartridge which has been verified by test (as suitable for backflow protection against Fluid Category 2). The inlet of hose to the pull-out spray incorporates an approved check valve cartridge which has not been fully tested to demonstrate it provides backflow protection. The outlet of pull-out spray incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201352
Expiry date:
31/01/2027
Size:
Stainless steel braided, PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Clearwater on body
Installation Requirements:
R001 R009 R010 R090
Model:
KIR20CP, KIR20BN, KIR30CP, KIR30BN, KIR30BB, KIR30MB, TOP30BN, TOP30BB & TOP30MB
Factor:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Country
United Kingdom
Phone
0168429955

View All Listings by this Company

Print This Approval


#2209014

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headworks with single lever operating members and a pull-out spray spout. The outlet incorporates a plastic aerator and single check valve cartridge however the product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2209014
Expiry date:
30/09/2027
Size:
Stainless steel braided, silicone lined flexible hose assembly with 3/8" BSP captive nuts
Marking:
FIMA| Carlo Frattini on operating member
Installation Requirements:
R001 R009 R090
Model:
F3538N.S.WR F3538N.WR F3538NM.S.WR F3538NM.WR
Manufacturer:
Fima Carlo Frattini SPA
Company Name
Fima Carlo Frattini SPA
Country
Italy
Phone
0039 0322 9549

View All Listings by this Company

Print This Approval


#2203376

Single-hole, single outlet (swivel) combination tap assembly with brass body (chrome plated), incorporating a ceramic cartridge headwork with a single lever operating member. The product has a pull-out spray outlet which incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection The cold inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2203376
Expiry date:
31/03/2027
Size:
Stainless-steel braided, EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Buster & Punch London on body
Installation Requirements:
R001 R010 R090
Model:
RKT-071664, RKT-351667, RKT-051665, RKT-591666, RKT-071660, RKT-361663, RKT-051661 & RKT-591662 COMBINATION TAP ASSEMBLIES
Factor:
Buster and Punch Ltd
Company Name
Buster and Punch Ltd
Address
29 St. Peters Street Stamford
Postcode
PE9 2PF

View All Listings by this Company

Print This Approval


#2209012

Range of single hole, single outlet (swivel) combination tap assemblies with pull-down hose. Incorporating a brass body (various finishes) and a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator and an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2209012
Expiry date:
30/09/2027
Size:
Stainless steel braided flexible EPDM lined flexible hose assemblies with ½” BSP captive nuts.
Marking:
1810 on operating member.
Installation Requirements:
R001 R006 R010
Model:
SPI-KNR/01/CH - SPIRALE KNURLED CHROME SPI-KNR/02/BS - SPIRALE KNURLED BRUSHED STEEL SPI-KNR/04/COP - SPIRALE KNURLED COPPER SPI-KNR/05/GM - SPIRALE KNURLED GUNMETAL SPI-KNR/06/GB - SPIRALE KNURLED GOLD BRASS SPI-KNR/07/MB - SPIRALE KNURLED MATTE BLACK SPI-KNR/08/BGB - SPIRALE KNURLED BRUSHED GOLD BRASS SPI/01/CH - SPIRALE CHROME SPI/02/BS - SPIRALE BRUSHED STEEL SPI/04/COP - SPIRALE COPPER SPI/05/GM - SPIRALE GUNMETAL SPI/06/GB - SPIRALE GOLD BRASS SPI/07/MB - SPIRALE MATTE BLACK SPI/08/BGB - SPIRALE BRUSHED GOLD BRASS
Factor:
The 1810 Company limited
Company Name
The 1810 Company limited
Address
Units 14-16, Bromfield Industrial Estate, Queens Lane Mold
Postcode
CH7 1JR
Phone
0044 7772144600

View All Listings by this Company

Print This Approval


#2209062

Range of single hole, single outlet (swivel) combination tap assemblies with pull-down hose. Incorporating a brass body (various finishes) and a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator and an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2209062
Expiry date:
30/09/2027
Size:
Stainless steel braided flexible EPDM lined flexible hose assemblies with ½” BSP captive nuts.
Marking:
1810 on operating member.
Installation Requirements:
R001 R010 R090
Model:
SPI-SPR/01/CH - SPIRALE SPRING CHROME SPI-SPR/02/BS - SPIRALE SPRING BRUSHED STEEL SPI-SPR/04/COP - SPIRALE SPRING COPPER SPI-SPR/05/GM - SPIRALE SPRING GUNMETAL SPI-SPR/06/GB - SPIRALE SPRING GOLD BRASS SPI-SPR/07/MB - SPIRALE SPRING MATTE BLACK SPI-SPR/08/BGB - SPIRALE SPRING BRUSHED GOLD BRASS
Factor:
The 1810 Company limited
Company Name
The 1810 Company limited
Address
Units 14-16, Bromfield Industrial Estate, Queens Lane Mold
Postcode
CH7 1JR
Phone
0044 7772144600

View All Listings by this Company

Print This Approval


#2207322

Single hole, single outlet (swivel) combination tap assembly (chrome plated brass) incorporating a ceramic cartridge headwork with single lever operating member and pull out spray handset. The spout outlet incorporates a plastic aerator. Maximum working pressure 5 bar. Maximum operating temperature 65°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2207322
Expiry date:
31/07/2027
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP (F) captive nut end connections.
Marking:
Deva on front of body. DTC25 on rear of body.
Installation Requirements:
R001 R090
Model:
PEN104 – Pendle pull out kitchen mixer
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2212704

Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated brass bodies), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet are pull-out spray type, which incorporates aerators and approved single check valve cartridges, however the complete assemblies have not been tested to demonstrate backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 65.°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2212704
Expiry date:
31/12/2027
Size:
Stainless steel braided EPDM lined flexible hoses with 1/2" BSP captive nuts 15mm compression inlet adapter on stainless Steel braided EPDM lined flexible hoses – Model M9604T
Marking:
PPI on tap body.
Installation Requirements:
R001 R090
Model:
167028 907013 M9604T
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval


#2210329

Single hole, single outlet (swivel) combination tap assembly stainless steel (various finishes), incorporating a ceramic cartridge headworks with single lever operating member and pullout spray handset. The spout outlet incorporates a plastic aerator and an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2210329
Expiry date:
31/10/2027
Size:
Stainless steel braided PET lined flexible hose assemblies with ½” BSP (F) captive nut end connections
Marking:
Nokite, WRAS on body
Installation Requirements:
R001 R007 R009 R090
Model:
T12003* The suffix “*” denotes different surface finishes as below: P - Satin PGM - Gunmetal PCOP - Copper PBRS - Brass PMB - Matte black PWH - Painting White
Manufacturer:
Nokite EcoSmart Water Heating Systems (Guangdong) Co., Ltd.
Company Name
Nokite EcoSmart Water Heating Systems (Guangdong) Co., Ltd.
Address
38 South Shunde Avenue Ronggui Foshan Guangdong 528305
Country
China

View All Listings by this Company

Print This Approval


#2210360

Single hole, single outlet (swivel) combination tap assemblies stainless steel (various finishes), incorporating a ceramic cartridge headworks with single lever operating member and pullout spray handset. The spout outlet incorporates a plastic aerator and an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2210360
Expiry date:
31/10/2027
Size:
Stainless steel braided PET lined flexible hose assemblies with ½” BSP (F) captive nut end connections
Marking:
ABI, WRAS on body
Installation Requirements:
R001 R007 R009 R090
Model:
13396,13395, 13394,13393, 13952 & 14351 combination tap assemblies
Factor:
ABI Interiors Pty. Ltd.
Company Name
ABI Interiors Pty. Ltd.
Address
3/128 Kortum Drive,Burleigh Heads, Gold Coast,QLD,4220
Country
Australia

View All Listings by this Company

Print This Approval


#2211012

Single hole, single outlet (swivel) combination tap assembly (brass body - various finishes), incorporating a ceramic cartridge headwork with single leaver operating member. The spout outlet is a pull-out spray type incorporating a plastic aerator. The pull-out hose inlet connector incorporates an approved check valve cartridge, however, , the complete assembly has not been tested to demonstrate it provides backflow prevention Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2211012
Expiry date:
30/11/2027
Size:
Stainless steel braided PEX lined flexible hose with 1/2" BSP captive nut end connections.
Marking:
LOTA On Body
Installation Requirements:
R001 R009 R090
Model:
63557-00X Remark: X means different finishes. Including where X=01, Chrome, X=6801, Matt Black , X=4408, Brushed Brass, X=0402, Brushed Nickel PVD X=5804, Heirloom Silver , X=08, Stainless steel , X=04, Brushed Nickel
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Country
China
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#2211018

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks with single lever operating members. The spout is a pull-down hose and handset with an optional spray function. The outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2211018
Expiry date:
30/11/2027
Size:
PEX lined flexible hose assemblies with stainless steel braiding with 1/2" BSP (F) captive nut end connection.
Marking:
Gaoao on body
Installation Requirements:
R001 R006 R009 R010
Model:
ZA1143
Manufacturer:
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Company Name
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province
Country
China

View All Listings by this Company

Print This Approval


#2211016

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass) incorporating ceramic cartridge headworks and single lever operating members. The spout outlet is a pull-out spray type. The spout inlets incorporate approved check valve cartridges; however, the complete assembly has not been tested to demonstrate it provides backflow prevention. The spout outlets incorporate plastic aerators. The inlet hoses incorporate stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2211016
Expiry date:
30/11/2027
Size:
PEX lined flexible hose assemblies with stainless steel braiding with 1/2" BSP captive nut
Marking:
Gaoao on body
Installation Requirements:
R001 R009 R090
Model:
ZA6321 ZA6120 ZA6120SG SG is stainless steel Brushed,
Manufacturer:
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Company Name
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province
Country
China

View All Listings by this Company

Print This Approval


#2212710

Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated brass bodies), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet are pull-out spray type, which incorporates aerators and approved single check valve cartridges, however the complete assemblies have not been tested to demonstrate backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 65.°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2212710
Expiry date:
31/12/2027
Size:
Stainless steel braided EPDM lined flexible hoses with 1/2" BSP captive nuts
Marking:
Nabis on operating member
Installation Requirements:
R001 R090
Model:
B08924/ Pratica Lever Pull out kitchen tap & B08930 / Lesina Monobloc Pull out kitchen tap COMBINATION TAP ASSEMBLIES
Factor:
Wolseley UK
Company Name
Wolseley UK
Address
K2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926 705792

View All Listings by this Company

Print This Approval


#2212054

Range of single hole, single outlet pull out spray, combination tap assemblies (brass bodies, various finishes – see models) incorporating ceramic cartridge headworks with single lever operating members controlling the hot and cold and a quarter turn ceramic disk headwork with a dome type operating member controlling chilled water supply. The spout outlet incorporates a plastic aerator. The inlet from the tap to the pull-out spray hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2212054
Expiry date:
31/12/2027
Size:
Polyamide braided PEX lined flexible hose assemblies incorporating 3/8" BSP (F) captive nut end connections.
Marking:
Grohe on body
Installation Requirements:
R001 R009 R090
Model:
30601000 - Minta pull-out duo L-spout chrome, 30601DC0 - Minta pull-out duo L-spout supersteel, 30590000 - Minta pull-out duo L-spout chrome, 30590DC0 - Minta pull-out duo L-spout supersteel, 30590KF0 - Minta pull-out duo L-spout matt black. Models added June 2023: 416967045 - Minta pull-out duo L-spout chrome, 416967DC4 - Minta pull-out duo L-spout supersteel, 416967KF4 - Minta pull-out duo L-spout matt black.
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Country
Germany
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company
Manufacturer:
Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen, 361022
Country
China
General Email

View All Listings by this Company

Print This Approval


#2212055

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) incorporating ceramic cartridge headworks with single lever operating member. The outlet is a pull-out spray type and incorporates a plastic aerator. The inlet hoses incorporate stainless steel strainers. Models ZA1147(ZA1147-G, ZA1147-S) have a maximum working pressure of 10.0 bar. All other models have a maximum working pressure of 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2212055
Expiry date:
31/12/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies. Models ZA3470YB(ZA3470YB-G): 3/8” captive nut. All other models: ½” captive nut.
Marking:
GAOAO on body
Installation Requirements:
R001 R009 R090
Model:
ZA3470YB & ZA3470YB-G. ZA3470CS & ZA3470CS-G. ZA1147, ZA1147-G & ZA1147-S. ZA3836, ZA3836-G & ZA3836-S. ZA3836CS & ZA3836CS-G. ZA3835 & ZA3835-G. ZA3834CP & ZA3834-G. ZA3834CS & ZA3834CS-G. The following letters denote surface finish: CS: Stainless steel YB: Matte Graphite None/CP: Chrome
Factor:
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Company Name
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province
Country
China

View All Listings by this Company

Print This Approval


#2211057

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass) incorporating ceramic cartridge headworks and single lever operating members. The spout outlet is a pull-out spray type. The spout inlets incorporate approved check valve cartridges; however, the complete assembly has not been tested to demonstrate it provides backflow prevention. The spout outlets incorporate plastic aerators. The inlet hoses incorporate stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2211057
Expiry date:
30/11/2027
Size:
PEX lined flexible hose assemblies with stainless steel braiding with 1/2" BSP captive nut
Marking:
Cooke & Lewis & date of manufacture MM/YY on body
Installation Requirements:
R001 R009 R090
Model:
3663602929956, 3663602929963 & 5059340504360 (stainless steel Brushed)
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2211060

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks with single lever operating members. The spout is a pull-down hose and handset with an optional spray function. The outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2211060
Expiry date:
30/11/2027
Size:
PEX lined flexible hose assemblies with stainless steel braiding with 1/2" BSP (F) captive nut end connection.
Marking:
Cooke & Lewis & Date of manufacture MM/YYYY on body
Installation Requirements:
R001 R006 R009 R010
Model:
3663602930662
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2303033

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-down spray type incorporating a push button. The connection to the pull-down hose incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 5.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2303033
Expiry date:
31/03/2028
Size:
Stainless steel braided flexible hose assemblies with ½” BSP (F) conical nut end connections.
Marking:
PPI laser etched on base of body
Installation Requirements:
R001 R090
Model:
217019 217019 MBK1 217019 BGP
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval


#2303073

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-down spray type incorporating a push button. The connection to the pull-down hose incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 5.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2303073
Expiry date:
31/03/2028
Size:
Stainless steel braided flexible hose assemblies with ½” BSP (F) conical nut end connections.
Marking:
TP on base of body
Installation Requirements:
R001 R090
Model:
357181 PULL OUT MONOBLOC MIXER KITCHEN TAP CHROME & BLACK HOSE
Factor:
Travis Perkins Plc
Company Name
Travis Perkins Plc
Address
Divisional Office Lakeside House Bedford
Postcode
NN4 7HD
Country
Northhampton
Phone
+44 (0) 1604 503457

View All Listings by this Company

Print This Approval


#2304028

Range of single hole or two-hole pre-rinse taps (chromium plated brass bodies) which have either a single outlet or two outlets. The flow is controlled by rising spindle headworks with single lever operating members and the spout outlet incorporates a plastic flow straightener. Model 89001MN-2 is a single hole tap with two outlets; a spout (swivel) outlet and pull-down pre-rinse assembly which incorporates a trigger mechanism. Models 98001-1, 98001-1-01, 98001MN-1, 98001MN-1-01 are two-hole taps with a single outlet; a pull-down pre-rinse assembly which incorporates a trigger mechanism. Models 98007MN-2, 98007MN-2-01, 98007-2 & 98007-2-01 are two-hole taps with two outlets; a spout (swivel) outlet and pull-down pre-rinse assembly which incorporates a trigger mechanism. Models 98007MN-1 & 98007MN-1-01 are two-hole taps with a single outlet; a pull-down pre-rinse assembly which incorporates a trigger mechanism. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2304028
Expiry date:
30/04/2028
Size:
M8 or ½” BSP (F)
Marking:
Top Rinse and WRAS on body.
Installation Requirements:
R001 R010 R006
Model:
98001MN-2 MINI, 98001-1, 98007-2-01, 98001-1-01, 98001MN-1 MINI, 98001MN-1-01 MINI, 98007MN-2 MINI, 98007MN-2-01 MINI, 98007-2, 98007MN-1 MINI & 98007MN-1-01.
Manufacturer:
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Company Name
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Address
Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang
Country
China
Phone
+86-576-87121119

View All Listings by this Company

Print This Approval


#2005374

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating a pull out spray with push button trigger assembly and dome type operating member. The pull out spray also incorporates a single check valve assembly (however the complete unit has not been tested to demonstrate it provides adequate backflow protection). The outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2005374
Expiry date:
31/05/2025
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections
Marking:
Grohe on body.
Installation Requirements:
R001 R009 R090
Model:
30442000 30442DC0 30443000 30443DC0 30444000 30444AL0 30444DC0 30444DL0 31615GN0 30444GN0 31615BE0 31615EN0 31615GL0 31615DA0 31615A00
Factor:
Grohe Deutschland Vertriebs GmbH
Company Name
Grohe Deutschland Vertriebs GmbH
Address
Zur Porta 9, 32457 Porta Westfalica
Country
Germany

View All Listings by this Company

Print This Approval


#2303064

Range of single hole single outlet fixed combination tap assemblies, (chrome plated brass), incorporating quarter turn ceramic disc headworks with a single lever operating member and non-rising spindle headwork with a variety of operating members (See models) controlling the flow to the additional swivel spout. The product incorporates a hand held pre-rinse spray with a self-closing trigger, either on a flexible hose within an overhead spring or as a fixed length flexible hose on a swivel arm (see model). The inlets incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The outlet of the swivel spouts incorporates plastic aerators. These products are supplied with metal back nuts. Maximum working pressure 8.6 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2303064
Expiry date:
31/03/2028
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Top line on body. ENCORE (brand of CHG Europe B.V.) on trigger mechanism.
Installation Requirements:
R001 R006 R009 R010
Model:
Flexible hose within an overhead spring: TW 51-116111-S3, TW 51-117111-S3, TW 51-116111-S3-DA1, TW 51-116111-S3-DA2, TW 51-116111-S3-DA3, TW 51-116111-S3-DA4, TW 51-117111-S3-DA1, TW 51-117111-S3-DA2, TW 51-117111-S3-DA3, TW 51-117111-S3-DA4. Fixed length flexible hose on a swivel arm: TW 51-510411-S3, TW 51-511411-S3, TW 51-510411-S3-DA1, TW 51-510411-S3-DA2, TW 51-510411-S3-DA3, TW 51-510411-S3-DA4. TW 51-511411-S3-DA1 TW 51-511411-S3-DA2 TW 51-511411-S3-DA3 TW 51-511411-S3-DA4 The final number = type of operating member. 1 = Single lever, 2 = Cross top, 3 = Triangle handle, 4 = Designer lever.
Factor:
CHG Europe B.V.
Company Name
CHG Europe B.V.
Postcode
THE NETHERLANDS

View All Listings by this Company

Print This Approval


#2303065

Range of single hole single outlet fixed combination tap assemblies, (chrome plated brass), incorporating a quarter turn ceramic disc headwork with a single lever operating member and non-rising spindle headwork with a variety of operating members (See models) controlling the flow to the additional swivel spout. The product incorporates a handheld pre-rinse spray with a self-closing trigger, either on a flexible hose within an overhead spring or as a fixed length flexible hose on a swivel arm (see model). The inlets incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The outlet of the swivel spouts incorporates plastic aerators. Maximum working pressure 8.6 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2303065
Expiry date:
31/03/2028
Size:
½” BSP (M).
Marking:
Top line on body. ENCORE (brand of CHG Europe B.V.) on trigger mechanism.
Installation Requirements:
R001 R006
Model:
Flexible hose within an overhead spring: TW 20-116111-S3, TW 20-117111-S3, TW 20-116111-S3-DA1, TW 20-116111-S3-DA2, TW 20-116111-S3-DA3, TW 20-116111-S3-DA4, TW 20-117111-S3-DA1, TW 20-117111-S3-DA2, TW 20-117111-S3-DA3, TW 20-117111-S3-DA4. Fixed length flexible hose on a swivel arm: TW 20-510411-S3, TW 20-511411-S3, TW 20-510411-S3-DA1, TW 20-510411-S3-DA2, TW 20-510411-S3-DA3, TW 20-510411-S3-DA4, TW 20-511411-S3-DA1, TW 20-511411-S3-DA2, TW 20-511411-S3-DA3, TW 20-511411-S3-DA4. The final number = type of operating member. 1 = Single lever, 2 = Cross top, 3 = Triangle handle, 4 = Designer lever.
Factor:
CHG Europe B.V.
Company Name
CHG Europe B.V.
Postcode
THE NETHERLANDS

View All Listings by this Company

Print This Approval


#2303057

Range of deck mounted, single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating either quarter turn ceramic disc or quarter turn compression washer headworks with various operating members (see model). The inlets of the quarter turn ceramic disc headworks incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product incorporates a handheld pre-rinse spray with a self-closing trigger, either on a flexible hose within an overhead spring or as a fixed length flexible hose on a swivel arm (see model). Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn compression washer headwork with various operating members (see model). The product is supplied with metal backnuts. Maximum working pressure 6.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2303057
Expiry date:
31/03/2028
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
ENCORE (brand of CHG Europe B.V.) on body and hand spray.
Installation Requirements:
R001 R006 R009 R010
Model:
KW 51 X1 X2 X3 X4 X5 X6 S3 (D A X7) K = Encore series. W = WRAS series. 51 = Single hole deck mount double pantry. X1 = 1 - Spring pre-rinse. 5 - Swivel arm pre-rinse - 12” arm length. X2 (Main body headwork) = 0 - Compression. 1 - Ceramic. X3 (Swivel arm support/Spring type) = 0 - W/O Swivel arm P/R support. 1 - W/ Swivel arm P/R support. 6 - Spring chrome plated. 7 - Spring stainless steel. X4 (riser) = 1 - 18” riser (only on spring type pre-rinse). 4 - 32” riser (only on swivel type pre-rinse). X5 (wall bracket) = 1 - Yes X6 (Main body operating member) = 1 - Standard lever. 2 - Cross. 3 - Triangle handle. 4 - Designer handle. 5 - 4” Wrist blade. 6 - 6” Wrist blade. S3 - Standard spray valve Optional: D - Add on faucet W/ 12” spout A - 0.5 GPM PCA Spray vandal resistant X7 (Add-on spout operating member) = 1 - Standard lever. 2 - Cross. 3 - Triangle handle. 4 - Designer handle.
Factor:
CHG Europe B.V.
Company Name
CHG Europe B.V.
Postcode
THE NETHERLANDS

View All Listings by this Company

Print This Approval


#2303058

Range of deck mounted, single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc or a quarter turn compression washer headwork with various operating members (see model). The inlet of the quarter turn ceramic disc headwork incorporates an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product incorporates a handheld pre-rinse spray with a self-closing trigger, either on a flexible hose within an overhead spring or as a fixed length flexible hose on a swivel arm (see model). Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn compression washer headwork with various operating members (see model). The product is supplied with metal backnuts. Maximum working pressure 6.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2303058
Expiry date:
31/03/2028
Size:
½” BSP (M).
Marking:
ENCORE (brand of CHG Europe B.V.) on body and hand spray.
Installation Requirements:
R001 R006
Model:
KW 63 X1 X2 X3 X4 X5 X6 S3 (D A X7) K = Encore series. W = WRAS series. 63 = Single hole deck mount single pantry. X1 = 1 - Spring pre-rinse. 5 - Swivel arm pre-rinse - 12” arm length. X2 (Main body headwork) = 0 - Compression. 1 - Ceramic. X3 (Swivel arm support/Spring type) = 0 - W/O Swivel arm P/R support. 1 - W/ Swivel arm P/R support. 6 - Spring chrome plated. 7 - Spring stainless steel. X4 (riser) = 1 - 18” riser (only on spring type pre-rinse). 4 - 32” riser (only on swivel type pre-rinse). X5 (wall bracket) = 1 - Yes X6 (Main body operating member) = 1 - Standard lever. 2 - Cross. 3 - Triangle handle. 4 - Designer handle. 5 - 4” Wrist blade. 6 - 6” Wrist blade. S3 - Standard spray valve Optional: D - Add on faucet W/ 12” spout A - 0.5 GPM PCA Spray vandal resistant X7 (Add-on spout operating member) = 1 - Standard lever. 2 - Cross. 3 - Triangle handle. 4 - Designer handle.
Factor:
CHG Europe B.V.
Company Name
CHG Europe B.V.
Postcode
THE NETHERLANDS

View All Listings by this Company

Print This Approval


#2212099

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) incorporating ceramic cartridge headworks with single lever operating member. The outlet is a pull-out spray type and incorporates a plastic aerator. The inlet hoses incorporate stainless steel strainers. Models 5059340452869 have a maximum working pressure of 10.0 bar. All other models have a maximum working pressure of 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2212099
Expiry date:
31/12/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies. Models 5059340504469: 3/8” captive nut. All other models: ½” captive nut.
Marking:
Kingfisher Good Home Logo & Date of Manufacture MM/YYYY on body
Installation Requirements:
R001 R009 R090
Model:
5059340504469, 5059340504421, 5059340452869, 5059340452876, 5059340452883, 5059340452890, 5059340452791 & 5059340452807
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2301345

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (chrome plated) and pull-out spray. The products incorporate a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2301345
Expiry date:
31/01/2028
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
Gessi on operating member
Installation Requirements:
R001 R009 R010 R090
Model:
60433, 60435, 60485 & 60465
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Country
Italy
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2309333

Single hole, single outlet, (swivel) combination tap assembly, incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a pull-down hose and a plastic aerator. The inlet hoses incorporate approved check valve cartridges, however, the complete assembly has not been fully tested to it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2309333
Expiry date:
30/09/2028
Size:
Stainless steel braided EPDM lined, flexible hose with ½” BSP (M) connection.
Marking:
SMR on underside of handle
Installation Requirements:
R001 R006 R010
Model:
GENIO
Factor:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road
Postcode
S75 1HT
Country
Barnsley
Phone
01226 283434
General Email
pillingworth@abodedesigns.co.uk

View All Listings by this Company
Manufacturer:
SAN MARCO RUBINETTERIA S.r.l.
Company Name
SAN MARCO RUBINETTERIA S.r.l.
Address
Via Carducci 10 13867 Pray (BI)
Country
Italy
General Email

View All Listings by this Company

Print This Approval


#2311343

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass bodies), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull down spray type and incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2311343
Expiry date:
30/11/2028
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating 15mm compression connections.
Marking:
PPI on Body
Installation Requirements:
R001 R090
Model:
177014
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval


#2311344

Range of single hole, single outlet, (swivel), combination tap assemblies (chromium plated brass bodies), incorporating quarter turn ceramic disc headworks and single lever operating members. The outlet is a pull down spray type and incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2311344
Expiry date:
30/11/2028
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections. 15mm compression – (137040 models only)
Marking:
PPI on Body
Installation Requirements:
R001 R006 R010
Model:
177041 137040 137040 BN
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval


#2309331

Single-hole, single outlet, (swivel), combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull-out spray type that incorporates a plastic aerator. The inlet of the cold supply hose and the pull-out spray handset both incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2309331
Expiry date:
30/09/2028
Size:
Cold inlet: Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (M) end connection. Hot inlet: Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connection.
Marking:
SMR on body.
Installation Requirements:
R001 R090
Model:
Log L Pull Out
Factor:
SAN MARCO RUBINETTERIA S.r.l.
Company Name
SAN MARCO RUBINETTERIA S.r.l.
Address
Via Carducci 10 13867 Pray (BI)
Country
Italy

View All Listings by this Company
Manufacturer:
SAN MARCO RUBINETTERIA S.r.l.
Company Name
SAN MARCO RUBINETTERIA S.r.l.
Address
Via Carducci 10 13867 Pray (BI)
Country
Italy

View All Listings by this Company

Print This Approval


#2311367

Range of single hole, single outlet, (swivel), combination tap assemblies (chromium plated brass bodies), incorporating quarter turn ceramic disc headworks and single lever operating members. The outlet is a pull down spray type and incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2311367
Expiry date:
30/11/2028
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
TP on Body
Installation Requirements:
R001 R006 R010
Model:
352757 Loose Coil Tap Brushed
Factor:
Travis Perkins Plc
Company Name
Travis Perkins Plc
Address
Divisional Office Lakeside House Bedford
Postcode
NN4 7HD
Country
Northhampton
Phone
+44 (0) 1604 503457

View All Listings by this Company

Print This Approval


#2311368

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass bodies), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull down spray type and incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2311368
Expiry date:
30/11/2028
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating 15mm compression connections.
Marking:
TP on Body
Installation Requirements:
R001 R090
Model:
546880 Albi Tight Coil Sink Mixer Chrome
Factor:
Travis Perkins Plc
Company Name
Travis Perkins Plc
Address
Divisional Office Lakeside House Bedford
Postcode
NN4 7HD
Country
Northhampton
Phone
+44 (0) 1604 503457

View All Listings by this Company

Print This Approval


#2312367

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-out spray type which incorporates a nylon braided flexible hose incorporating a dual layer inner hose consisting of PEX inner layer and HDPE outer layer, and a manually operated button to divert between a plastic aerator and the spray function. The spray handset incorporates an approved check valve cartridge with an integral plastic flow regulator, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2312367
Expiry date:
31/12/2028
Note:
R007 applies only to the hose assembly for use between the tap body and the quick-connect fitting.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Franke on operating member.
Installation Requirements:
R001 R007 R009 R090
Model:
Pescara: 115.0523.290 (Chrome), 115.0523.302 (Stainless-steel), 115.0538.940 (Chrome), 115.0539.021 (Stainless-steel), 115.0575.968 (Matte black).
Factor:
Franke Kitchen System Ltd
Company Name
Franke Kitchen System Ltd
Address
Franke Strasse 2 CH-4663 Aarburg
Country
Switzerland

View All Listings by this Company
Manufacturer:
Xiamen Solex High-tech Industries Co,. Ltd
Company Name
Xiamen Solex High-tech Industries Co,. Ltd
Address
NO.298 sunshine western road, Haicang District, Xiamen city
Country
China

View All Listings by this Company

Print This Approval


#2311369

Range of single hole, single outlet, (swivel), combination tap assemblies (chromium plated brass bodies), incorporating quarter turn ceramic disc headworks and single lever operating members. The outlet is a pull down spray type and incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2311369
Expiry date:
30/11/2028
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections. 15mm compression – (137040 models only)
Marking:
Nabis on operating member.
Installation Requirements:
R001 R006 R010
Model:
B08929* Vico mono pull out kitchen tap
Factor:
Wolseley UK
Company Name
Wolseley UK
Address
K2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926 705792

View All Listings by this Company

Print This Approval


#240104007

Range of single hole, single outlet (swivel) combination tap assemblies with (brass bodies -various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator.and a pull out spray feature. The connection between the outlet and the hose incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate that it provides backflow protection Maximum working pressure 7 bar. Maximum operating temperature 65ºC.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
240104007
Expiry date:
31/01/2029
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
SPEC Industries on operating member
Installation Requirements:
R001 R009 R090
Model:
F10360 Finish: Satin F10361 Finish: Matt Black F1036N Finish: Satin Gold F1036J Finish: Rose Gold F1036P Finish: Gun Metal F10400 Finish: Satin F10401 Finish: Matt Black F1040N Finish: Satin Gold F1040J Finish: Rose Gold F1040P Finish: Gun Metal
Manufacturer:
Guangdong SPEC Industries Co., Ltd.
Company Name
Guangdong SPEC Industries Co., Ltd.
Address
Dongxi Industrial Zone, Zhishan Twon, Heshan City, Guangdong Province
Country
China

View All Listings by this Company

Print This Approval


#240202051

Single hole, single outlet (swivel) combination tap assemblies with (brass bodies -various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator and a pull out spray. The connection between the outlet and the hose incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
240202051
Expiry date:
28/02/2029
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections
Marking:
PPI on body
Installation Requirements:
R001 R006 R009 R090
Model:
237016 X XXX X XXX Denotes the following: First X: Different handle option and the second, third & fourth XXX for different finishes: Handles: A – Single lever type Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval


#240202063

Single hole, single outlet, pull-out spray combination tap assemblies incorporating brass body (two finishes) and a ceramic cartridge headwork with single lever operating member. The pull-out spray spout outlets swivel and incorporate a plastic aerator. The inlet to the tap and the spout outlet incorporate a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 3.0 bar. Maximum operating temperature 60°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
240202063
Expiry date:
28/02/2029
Size:
Stainless steel braided EPDM lined hose flexible hose assemblies with ½” BSP captive nut connections.
Marking:
Carysil Products logo on rear of spout
Installation Requirements:
R001 R090
Model:
HS925C (chrome) & HS925B (brushed chrome).
Factor:
Carysil Products Ltd.
Company Name
Carysil Products Ltd.
Address
Ground floor Lower Washford Mill Mill Street Congleton Cheshire
Postcode
CW12 2AD

View All Listings by this Company

Print This Approval


#240288005

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout is a pull-out spray type incorporating a push button and plastic aerator. The connection to the pull-out hose incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 5.0 Bar. Non-metallic materials and components comply with BS6920 at 65°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
240288005
Expiry date:
28/02/2029
Size:
Stainless steel braided EPDM flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
PPI on Body.
Installation Requirements:
R001 R010 R090
Model:
227040 X XXX. X XXX Denotes the following: First X: Different handle option. The second, third & fourth XXX for different finishes: Handles: A – Single lever type. Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval


#240104022

Range of single hole, single outlet (swivel) combination tap assemblies with (brass bodies -various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator.and a pull out spray feature. The connection between the outlet and the hose incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate that it provides backflow protection Maximum working pressure 7 bar. Maximum operating temperature 65ºC.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
240104022
Expiry date:
31/01/2029
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
1810 on operating member
Installation Requirements:
R001 R009 R090
Model:
RIT/02/BS BRUSHED STEEL RIT/07/MB MATT BLACK RIT/10/BG BRUSHED GOLD RIT/09/RC ROSE COPPER RIT/05/GM GUN METAL EST/02/BS BRUSHED STEEL EST/07/MB MATT BLACK EST/10/BG BRUSHED GOLD EST/09/RC ROSE COPPER EST/05/GM GUN METAL
Factor:
The 1810 Company limited
Company Name
The 1810 Company limited
Address
Units 14-16, Bromfield Industrial Estate, Queens Lane Mold
Postcode
CH7 1JR
Phone
0044 7772144600

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.