T&S Brass and Bronze Works, Inc Approvals


#1907701

Range of two hole, single outlet (swivel) combination tap assemblies (include chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. The products are also supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907701
Expiry date:
31/07/2024
Size:
½” BSP (M)
Marking:
T&S on operating member.
Installation Requirements:
R001 R006 R010
Model:
UK-6DF00, UK-6DF06, UK-6DF08, UK-6DF10, UK-6DF12. Models added October 2020 UK-6DF00-WH4, UK-6DF06-WH4, UK-6DF08-WH4, UK-6DF10-WH4 & UK-6DF12-WH4.
Manufacturer:
T&S Brass and Bronze Works, Inc
Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Phone
1-800-868-0084

View All Listings by this Company

Print This Approval


#1907703

Range of deck mounted, single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a quarter turn ceramic disk headwork with a single lever operating member. The spout outlets incorporate a plastic aerator and the products are supplied with a metal backnut. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907703
Expiry date:
31/07/2024
Size:
½” BSP (M) inlet
Marking:
T&S on end of spout and on operating member.
Installation Requirements:
R001 R006
Model:
UK-1DF00, UK-1DF06, UK-1DF08, UK-1DF10, UK-1DF12. Models added October 2020 UK-1DF00-WH4, UK-1DF06-WH4, UK-1DF08-WH4, UK-1DF10-WH4 & UK-1DF12-WH4
Manufacturer:
T&S Brass and Bronze Works, Inc
Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Phone
1-800-868-0084

View All Listings by this Company

Print This Approval


#1907704

Range of deck mounted, single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disk headworks with single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with a metal backnut. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907704
Expiry date:
31/07/2024
Size:
M10 Female inlet
Marking:
T&S on body, spout and on operating member.
Installation Requirements:
R001 R006 R010
Model:
UK-2DF00, UK-2DF06, UK-2DF08, UK-2DF10 & UK-2DF12, Models added October 2020 UK-2DF00-WH4, UK-2DF06-WH4, UK-2DF08-WH4, UK-2DF10-WH4 & UK-2DF12-WH4.
Manufacturer:
T&S Brass and Bronze Works, Inc
Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Phone
1-800-868-0084

View All Listings by this Company

Print This Approval


#1907705

Range of deck mounted, two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907705
Expiry date:
31/07/2024
Size:
½” BSP (M)
Marking:
T&S on operating member.
Installation Requirements:
R001 R006 R010
Model:
UK-7DF00, UK-7DF06, UK-7DF08, UK-7DF10 & UK-7DF12, Models added October 2020 UK-7DF00-WH4, UK-7DF06-WH4, UK-7DF08-WH4, UK-7DF10-WH4 & UK-7DF12-WH4
Manufacturer:
T&S Brass and Bronze Works, Inc
Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Phone
1-800-868-0084

View All Listings by this Company

Print This Approval


#1907706

Range of wall mounted, two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907706
Expiry date:
31/07/2024
Size:
½” BSP (M)
Marking:
T&S on operating member
Installation Requirements:
R001 R010 R040
Model:
UK-8WF00-EE, UK-8WF06-EE, UK-8WF08-EE, UK-8WF10-EE & UK-8WF12-EE.
Manufacturer:
T&S Brass and Bronze Works, Inc
Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Phone
1-800-868-0084

View All Listings by this Company

Print This Approval


#2107071

Range of wall mounted, two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disk headwork with a single lever operating member. The product incorporates a hand held pre-rinse spray with a self-closing trigger on a flexible hose within an overhead spring. Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. The inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107071
Expiry date:
31/07/2026
Size:
½" BSP (M)
Marking:
T & S On Operating member. T & S On Spray body. T & S BRASS and WRAS On Hose connector. T & S On spout.
Installation Requirements:
R001 R010 R040
Model:
UMPK-8WLN-00. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06 or 08 = spout length in inches. E.g. UMPK-8WLN-08 for a 8” spout.
Manufacturer:
T&S Brass and Bronze Works, Inc
Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Phone
1-800-868-0084

View All Listings by this Company

Print This Approval


#2107094

Range of wall mounted, two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disk headworks with single lever operating members. The product incorporates a hand held pre-rinse spray with a self-closing trigger, either on a flexible hose within an overhead spring or as a fixed length flexible hose on a swivel arm (see model). Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. Each inlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107094
Expiry date:
31/07/2026
Size:
½” BSP (M)
Marking:
T&S on operating member and spray valve body. WRAS on hose ferrule of pre-rinse spray.
Installation Requirements:
rR001 R010 R040
Model:
Pre-rinse spray and overhead spring: UK-8WP00-L-EE. Pre-rinse on fixed length swivel arm: UK-8WP00-LA-EE. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06, 08, 10 or 12 = spout length in inches. E.g. UK-8WP10-LA-EE for a 10” spout.
Manufacturer:
T&S Brass and Bronze Works, Inc
Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Phone
1-800-868-0084

View All Listings by this Company

Print This Approval


#2107097

Range of deck mounted, single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disk headwork with a single lever operating member. The product incorporates a hand held pre-rinse spray with a self-closing trigger, either on a flexible hose within an overhead spring or as a fixed length flexible hose on a swivel arm (see model). Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. The product is supplied with metal backnuts. UK-1DPXX models only are a single feed and come with an optional ½” NPSM (M) x ½” BSP (F) brass adapter. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107097
Expiry date:
31/07/2026
Note:
R010 applies to the UK-2DP00 models only.
Size:
UK-1DP00 models: ½” NPS (M). UK-2DP00 models: M10 (F).
Marking:
T&S on operating member and spray valve body. WRAS on hose ferrule of pre-rinse spray.
Installation Requirements:
R001 R006 R010
Model:
Pre-rinse spray and overhead spring: UK-1DP00, UK-1DP00-J, UK-1DP00-L. Pre-rinse on fixed length swivel arm: UK-1DP00-A, UK-1DP00-JA, UK-1DP00-LA. Pre-rinse spray and overhead spring: UK-2DP00, UK-2DP00-J, UK-2DP00-L. Pre-rinse on fixed length swivel arm: UK-2DP00-A, UK-2DP00-JA, UK-2DP00-LA. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06, 08, 10 or 12 = spout length in inches. E.g. UK-1DP10-LA for a 10” spout.
Manufacturer:
T&S Brass and Bronze Works, Inc
Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Phone
1-800-868-0084

View All Listings by this Company

Print This Approval


#2107063

Range of deck mounted, single hole or two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating one (UMPM-1DLN-00 model only) or two quarter turn ceramic disk headworks with single lever operating members. The product incorporates a hand held pre-rinse spray with a self-closing trigger on a flexible hose within an overhead spring. Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. The UMPM-1DLN-00 model is a single feed and comes with an optional ½” NPSM (M) x ½” BSP (F) brass adapter. The UMPM-2DLN-00 model is supplied with two ½” BSP (F) x ½” BSP (M) single check assemblies (suitable for backflow protection against Fluid category 2), for installation on each inlet hose. The inlets on the UMPM-6DLN-00 & UMPM-7DLN- 00 models incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107063
Expiry date:
31/07/2026
Note:
R009 applies to the UMPM-2DLN-00 model. R010 applies to UMPM-6DLN-00 & UMPM-7DLN-00 models only.
Size:
UMPM-1DLN-00: ½” NPS (M). UMPM-2DLN-00: Polyamide (PA) braided PEX lined flexible hose assemblies with ½” BSP (M) end connections. UMPM-6DLN-00 & UMPM-7DLN-00: ½” BSP (M).
Marking:
T & S on operating member. T & S on spray body. T & S BRASS and WRAS on rinse spray hose connector. T & S on spout (UMPM-2DLN-00 & UMPM-6DLN-00 models only).
Installation Requirements:
R001 R006 R009 R010
Model:
Single hole: UMPM-1DLN-00. UMPM-2DLN-00. Two hole: UMPM-6DLN-00. UMPM-7DLN-00. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06 or 08 = spout length in inches. E.g. UMPM-1DLN-08 for a 8” spout.
Manufacturer:
T&S Brass and Bronze Works, Inc
Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Phone
1-800-868-0084

View All Listings by this Company

Print This Approval


#2107064

Range of wall mounted, two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disk headworks with single lever operating members. The product incorporates a hand held pre-rinse spray with a self-closing trigger on a flexible hose within an overhead spring. Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn ceramic disk headwork with a single lever operating member. The inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107064
Expiry date:
31/07/2026
Marking:
T & S on operating member. T & S and WRAS on rinse spray hose connector. T & S BRASS on spray body.
Installation Requirements:
R001 R010 R040
Model:
UMPM-8WLN-00. Where 00 refers to additional spout nozzle length. 00 = no additional spout (pre-rinse spray only), 06 or 08 = spout length in inches. E.g. UMPM-8WLN-08 for a 8” spout.
Manufacturer:
T&S Brass and Bronze Works, Inc
Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Phone
1-800-868-0084

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.