Carysil Products Ltd. Approvals

#240202063

Single hole, single outlet, pull-out spray combination tap assemblies incorporating brass body (two finishes) and a ceramic cartridge headwork with single lever operating member. The pull-out spray spout outlets swivel and incorporate a plastic aerator. The inlet to the tap and the spout outlet incorporate a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 3.0 bar. Maximum operating temperature 60°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
240202063
Size:
Stainless steel braided EPDM lined hose flexible hose assemblies with ½” BSP captive nut connections.
Marking:
Carysil Products logo on rear of spout
Installation Requirements:
R001 R090
Expiry date:
28/02/2029
Model:
HS925C (chrome) & HS925B (brushed chrome).
Product Images
Approval Holder:
Carysil Products Ltd.
Company Name
Carysil Products Ltd.
Address
Ground floor Lower Washford Mill Mill Street Congleton Cheshire
Postcode
CW12 2AD

View All Listings by this Company

Print This Approval

#241102038

Three-hole, single outlet (swivel) combination tap assembly (brass bodies - various finishes). Incorporating quarter turn ceramic disc headworks with single lever operating members. The products are also supplied with stainless steel braided EPDM lined flexible hose assemblies, intended for use between the side body valves and spout. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:
0660 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
241102038
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Carysil logo on rear of spout
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2029
Model:
HS135* Standard finish is chrome but in instance of different finish, standard code denoted by * will be replaced to complete model code with either B-NK (Brushed Nickel), B-BR (Brushed Brass), MB (Matt Black), B-COP (Brushed Copper), GM (Gunmetal)
Product Images
Approval Holder:
Carysil Products Ltd.
Company Name
Carysil Products Ltd.
Address
Ground floor Lower Washford Mill Mill Street Congleton Cheshire
Postcode
CW12 2AD

View All Listings by this Company

Print This Approval

#241102039

Two-hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes). Incorporating quarter turn ceramic disc headworks and single lever type operating members. The spout outlet incorporates a plastic aerator, and the products are supplied with metal backnuts. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
241102039
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Carysil logo on spout
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2029
Model:
HS125* Where * denotes the finish and can be replaced with any of the following: No Suffix = Chrome B-NK = Brushed Nickel B-BR = Brushed Brass MB = Matt Black B-COP = Brushed Copper GM = Gunmetal
Product Images
Approval Holder:
Carysil Products Ltd.
Company Name
Carysil Products Ltd.
Address
Ground floor Lower Washford Mill Mill Street Congleton Cheshire
Postcode
CW12 2AD

View All Listings by this Company

Print This Approval

#241102040

Range of single hole, single outlet (swivel) combination tap assemblies (various plated brass), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
241102040
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, PEX lined flexible hose assemblies incorporating with 1/2" BSP (F) captive nut end connections.
Marking:
Carysil Logo on back of spout
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2029
Model:
HS115* Where * denotes the suffix used for the product finish, and can be replaced with any of the following: No Suffix = Chrome B-NK = Brushed Nickel B-BR = Brushed Brass MB = Matt Black B-COP = Brushed Copper GM = Gunmetal
Product Images
Approval Holder:
Carysil Products Ltd.
Company Name
Carysil Products Ltd.
Address
Ground floor Lower Washford Mill Mill Street Congleton Cheshire
Postcode
CW12 2AD

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.