Combined bath filler and overflow with a brass body and metal trim (various finishes). The outlet incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a click type waste. Maximum operating temperature 85°C.
Range of combined bath fillers and overflow waste assemblies with plastic bodies (various finishes). The outlet incorporates a plastic aerator and the product is supplied with a cable operated pop-up waste. Maximum operating temperature 60°C.
Range of floor mounted, single hole, single outlet fixed combination tap assemblies (chromium plated brass with a self-cancelling diverter to shower outlet. The product incorporates a ceramic cartridge headwork and single lever operating member. The spout outlets incorporate an aerator and the product is supplied with a hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted fixed spout outlet (chromium plated brass) with a plastic aerator. Maximum operating temperature 60°C
Wall mounted bath spout outlet with a brass body (chrome plated) and a plastic aerator. The spout outlet are supplied with a single lever type operating member. Maximum operating temperature 60°C.
Wall mounted bath spout outlet incorporating a brass body (chromium plated) and a plastic aerator. The product is supplied with a single lever type operating member. Maximum operating temperature 60°C.
Wall mounted spout outlet incorporating brass body (chrome plated) and NBR ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Chlorine Dioxide dosing system consisting of various PVC pipes and fittings and a recirculating pump. There is a double check valve assembly (suitable for backflow protection against Fluid Category 3) located upstream of both the reaction chamber and the sampling point. Maximum working pressure 7.0 bar. Cold water use only.
‘HydroDOS’ chlorine dioxide dosing system with PVC-u pipework and EPDM ‘O’-rings. The product incorporates a water meter, strainer, isolation valves and a drain cock with hose spigot. Maximum working pressure 6.0 bar. Cold water use only.
ChloriDOS range of chemical blenders, consisting of a reaction chamber and pressure reducing valve inlet arrangement only. Maximum working pressure 8.0 bar. Cold water use only.
Range of LK press fittings with brass bodies and stainless steel sleeves for use with LK Universal PEX pipe. Jointing is achieved by hydraulic compression. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
Range of Aquaterra PP-RCT socket fusion fittings for use with Aquaterra PP-RCT SDR 6 pipe and Aquaterra PP-RCT SDR 7.4 pipe (manufactured to EN ISO 15874). Maximum working pressure 10.0 bar. Maximum working temperature 85°C.
Range of brass caplillary fittings for use with EN1057 copper tube. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of copper solder ring fittings for use with copper tube. For above and below ground use. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.
Range of brass caplillary fittings for use with EN1057 copper tube. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of brass compression fittings for use with copper pipe to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Range of dual flush, WC outlet valves. Each valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Maximum operating temperature – Cold water use.
Range of gas fired water heaters incorporating stainless steel strainers on the inlets. Maximum working pressure 10.0 Bar Maximum working temperature 85˚C
RINNAI range of wall mounted combination boilers.The unit incorporates a stainless-steel plate heat exchanger pressure relief valve set at 3.0 bar and an expansion vessel on the primary circuit. Maximum working pressure of primary circuit is 2.5 bar and secondary circuit is 10.0 bar. Maximum operating temperature 60˚C.
Hydroblock unit consisting of a stainless steel heat exchanger, a pressure relief valve pre-set at 3.0 bar, diverter valve and return valve. Maximum working pressure 2.5 bar. Maximum operating temperature 90°C
Range of screwed gland cock valves with bronze bodies, EPDM seats and ‘O’-rings. The products incorporate a hose union outlet connection. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.
Flow sensor with a plastic body. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Quick connector for connecting mixed water outlets to flexible hoses. Maximum operating temperature 60°C.
Range of pump docking manifolds with plastic bodies and NBR, EPDM and FKM ‘O’-rings. Maximum working pressure 8.0 bar. Cold water use only.
Automatic, electronic, water control system, intended to be used for leak detection. Maximum working pressure 10.0 bar. Cold water use only.
Stainless steel bodied sensor with EPDM ‘O’-ring. Maximum operating temperature 90°C.
Range of isolation valves incorporating brass bodies and EPDM ‘O’-rings. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of central heating pumps incorporating polyether sulphone impellers, copper-tin alloy body, carbon graphite axial bearings and EPDM O-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
Range of vertical multistage booster pumps, with stainless steel bodies and impellors (AISI304 or 316 see model). Maximum working pressure (model dependent): 4.0 bar models: BMVET(I) 32-10-1 to BMVET(I) 32-40. BMVET(I) 42-10-1 to BMVET(I) 42-20. BMVET(I) 65-10-1 to BMVET(I) 65-20-2. BMVET(I) 85-10-1 to BMVET(I) 85-10. 10.0 bar models: BMVET(I) 1-2 to BMVET(I)1-36. BMVET(I) 2-2 to BMVET(I) 2-11. BMVET(I) 3-2 to BMVET(I) 3-29. BMVET(I) 4-2 to BMVET(I) 4-10. BMVET(I) 8-2 to BMVET(I) 8-20. BMVET(I) 12-2 to BMVET(I) 12-18. BMVET(I) 16-2 t BMVET(I) 16-16. BMVET(I) 20-1 to BMVET(I) 20-17. BMVET(I) 32-50-2 to BMVET(I) 32-100. BMVET(I) 42-30-2 to BMVET(I) 42-50. BMVET(I) 65-20-1 to BMVET(I) 65-30. BMVET(I) 85-20-2 to BMVET(I) 85-30-2. 15.0 bar models: BMVET(I) 2-13 to BMVET(I) 2-26. BMVET(I) 3-31 to BMVET(I) 3-36. BMVET(I) 4-12 to BMVET(I) 4-22. BMVET(I) 32-110-2 to BMVET(I) 32-140. BMVET(I) 42-60-2 to BMVET(I) 42-130-2. BMVET(I) 65-40-2 to BMVET(I) 65-80-1. BMVET(I) 85-30-1 to BMVET(I) 85-60. Maximum operating temperature 100°C.
CM(E)(C) range of electronically operated pumps available in stainless steel, (‘EN 1.4301/AISI304’ or ‘EN 1.4401 /AISI316’) and cast iron. (CMEC models were added October 2023). The pumps are supplied with Sic-Sic mechanical shaft seals and FKM or EPDM seals. Cast iron models: Maximum working pressure 10.0 bar. Cold water use only. Stainless steel models: Maximum working pressure 16.0 bar. Maximum operating temperature 60°C for self-priming models, 99°C for all other models.
Range of submersible pumps with stainless steel bodies, impellers and shaft. The XPW range incorporates a strainer cowl on the suction end of the pump. The XPWA range features a stainless head which provides a threaded connection instead of the strainer. Cold water use only.
Range of shower handsets with a chromium plated plastic body. The inlets incorporate a flow regulator. Maximum operating temperature 60°C.
Ceiling mounted shower outlet consisting of a (chrome plated) brass shower arm and a (chrome plated) stainless steel shower rose with an integral ball joint and silicone nozzles . The connection between the shower arm and the ball joint incorporates a combined EPDM washer and stainless steel strainer. The connection between the ball joint and the overhead shower incorporates a plastic flow regulator. Maximum operating temperature 60°C.
Range of overhead shower outlets with brass bodies (various finishes), with a ball joint, EPDM ‘O’-rings and a NBR seal. The inlet incorporates a plastic flow regulator. Maximum operating temperature 60°C.
Range of Grohe Euphoria 110’ hand showers with chromium plated plastic bodies. The inlet of model 27.221 incoporates a plastic flow regulator. Maximum operating temperature 60°C.
Range of shower handsets, various finishes. All models incorporate a stainless-steel strainer in the inlet. The inlet of model 26 090 also incorporates a plastic flow regulator. Maximum operating temperature 60°C.
Range of shower handsets and shower heads chrome plated plastic bodies and built in combined flow restrictors/approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models added March 2023 are available in various finishes, see model.
Non-metallic materials and components comply with BS6920 at 60°C
Range of shower handsets and shower heads with chromium plated ABS bodies (models A111101 & A121510WT is not chromium plated). Maximum operating temperature 75°C.
Range of overhead shower outlets with chromium plated plastic bodies. Models SD1062 and SD1064 incorporate stainless steel strainers in the inlets. Maximum working temperature 75°C.
A self-closing shower handset with a plastic body, the inlet incorporates a plastic flow restrictor and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 85 °C.
Range of drain off taps incorporating DZR brass bodies, non-rising spindle operating mechanism and EPDM ‘O’-rings and seat washer. FIG 371 range incorporates a lockshield mechanism and the FIG 370 range incorporates a key operated mechanism. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of wall mounted non concussive shower valves with either a concealed or exposed brass body and chrome plated trim. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of self-closing basin taps (chromium plated brass) with spring loaded headwork and dome type operating members. The spout outlets incorporate a plastic aerator and the products are supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60⁰C.
Range of stainless steel braided PE-X lined flexible hose assemblies incorporating NBR washers and various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of stainless steel braided EPDM lined hose assemblies with EPDM O-rings and some models incorporate a servicing valve. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.
Wall mounted, exposed manual blending valve with brass body (various finishes) incorporating a ceramic cartridge headwork, which controls both temperature and flow and has a single lever operating member. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of wall mounted manually operated, concealed blending valves (brass body) incorporating ceramic cartridge headworks with single lever operating members and a manual diverter to shower outlets with single lever operating members. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, flow control valves with brass bodies and various trim sets (various finishes). Flow is controlled to the outlets via a push to on push to off ‘detent’ headwork. Maximum Working Pressure 10.0 bar. Maximum operating temperature 70°C.
Range of thermostatic mixing valves incorporating brass bodies (chrome plated). The flow is controlled by quarter turn ceramic disc headwork, with dome or cube type operating members, which also diverts the flow between multiple shower outlets. The temperature is controlled by a thermostatic cartridge with dome or cube type operating members. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection. The products are supplied with a shower hose, shower handset and overhead shower outlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of two way and three way concealed thermostatic shower valves, incorporating brass bodies and ceramic disc headwork with dome type operating members which controls the flow and diverts to various shower outlets. Temperature is controlled by a thermostatic cartridge incorporating a manual over ride button. Inlets incorporate stainless steel filters and an approved single check valve cartridge (however the complete assembly has not been tested to demonstrate it provides adequate backflow protection). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Page 10 of 231
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
