'Lettergold External Leak Sealer'. Clear silicone sealant. Apply as per manufacturer's TDS 'Version 1', dated '16/07/2025'. Cure for 96 hours@23°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5440 Sealants - Flat Faced Joints

Section Subtitle:

General.

WRAS Approval Number:

250655008

Expiry date:

30/06/2030

Approval Holder:

Lettergold Plastics Limited

Company Name

Lettergold Plastics Limited

Address

Unit 4 Hammond Close, Newmarket, Suffolk

Postcode

CB8 0AZ

Phone

+44 (0) 1638 666888

General Email

info@lettergold.co.uk

View All Listings by this Company

'LOCTITE 680'. Green coloured (translucent), anaerobic adhesive. Apply as per manufacturer's TDS 'Reference 1.5', dated 'August-2016'. For use with water up to 85°C. This product is to be applied and cured in strict accordance with the manufacturer's instructions

Section:

5520 Sealants - Screwed Joints

Section Subtitle:

Anaerobic adhesives. These products are to be applied and cured in strict accordance with the manufacturer's instructions

WRAS Approval Number:

250355092

Expiry date:

31/03/2030

Approval Holder:

Henkel (China) Investment Co., Ltd.

Company Name

Henkel (China) Investment Co., Ltd.

Address

Building 7, The Springs Center, No.99 Jiang Wan Cheng Road, Yangpu, Shanghai

Country

China

View All Listings by this Company

'Weld-On 748 ECO™ Blue PVC Cement'. Blue coloured solvent cement. Apply as per manufacturer’s TDS ‘748 ECO-09-2024’. ‘Weld-On 748 ECO™ Clear PVC Solvent Cement’ was added to the approval in March 2026. Clear solvent cement. Apply as per manufacturer’s TDS '748 ECO-07-2025'. Cure for 12 hours@5°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5560 Solvent Cements

Expiry date:

30/06/2030

Approval Holder:

IPS Corporation

Company Name

IPS Corporation

Address

445 W. Victoria Street, Compton, California 90220

Country

USA

Phone

(310) 898-3300

General Email

info@ipscorp.com

View All Listings by this Company

‘Grilamid TR 30 natural, TR 30 LS natural (appear colourless, translucent), TR 30 LS blue 4345, TR 30 LS blue 4387 & TR 30 LS blue 4396 (blue coloured)’. Injection moulded, PA 61/X materials. For use with water up to 85°C.

Section:

5585 Thermoplastic Moulding Compound

Expiry date:

31/05/2030

Approval Holder:

EMS-CHEMIE AG

Company Name

EMS-CHEMIE AG

Address

Via Innovativa 1, CH-7013 Domat/Ems

Country

Switzerland

Phone

+41 81 632 78 78

General Email

welcome@emsgrivory.com

View All Listings by this Company

Section:

0463 Combination Tap Assemblies

Description:

A Single hole tap(s) with a single outlet and a fixed spout, incorporating a manual diverter to a shower outlet.

Deck Mounted. Stainless Steel Braided EPDM lined inlet hoses. Capable of achieving AUK3 Tap Gap .

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R020

Expiry date:

31/05/2030

Notes & Further Information

X XXX Denotes the following: First X: Different handle and the second, third & fourth XXX for different finishes: Handles: A (Lever type) Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Product Images

Approval Holder:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company

Manufacturers:

PPI XIAMEN INDUSTRY CO LTD

Range of side entry BS1212-4 (2016), delayed action or non-delayed action type float operated valves for WC flushing cisterns. The inlet incorporates an optional flow restrictor. Maximum working pressure 10.0 Bar Maximum operating temperature Cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

251102002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Model B3230 can be supplied with either a brass or plastic ½” connection, a plastic 3/8” connection and either delayed or non-delayed action type float valve.

Size:

3/8” BSP (M) 1/2” BSP (M) (brass or plastic inlet connection)

Marking:

WDI, Model number, WRAS, BS1212-4 and datum level on valve body

Installation Requirements:

R001 R550

Expiry date:

30/11/2030

Model:

B3230

Manufacturer:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Concealed WC dual flushing cistern with a vertical BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 Bar. Cold water use only

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

250602712

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

My life, Wras and model number on cistern, 6 Litre mark inside cistern.

Installation Requirements:

R001 R280 R556 R581

Expiry date:

30/06/2030

Model:

MLSOLCC

Approval Holder:

MyLife Bathrooms Limited

Company Name

MyLife Bathrooms Limited

Address

Greenbank Industrial Estate Rampart Road Newry

Postcode

BT34 2QU

Country

United Kingdom

Phone

07835115808

General Email

cahal.lynch@mylifebathrooms.com

View All Listings by this Company

Section:

0531 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)

Wall Mounted Supplied with offset unions Undefinable Air Gap - See IRN's

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R030

Expiry date:

30/06/2030

Notes & Further Information

Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Section:

1670 Shower Outlets

Description:

A Range of Shower kit(s)

Deck Mounted Interlocked PEX lined Shower Hose Stainless Steel Braided PEX lined connection hose IRN R007 only applies to the connection hose.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R007 R040

Expiry date:

30/06/2030

Notes & Further Information

Finishes Available - Brass, Chrome, Nickel, Burnished Brass, Matte Nickel, Brass/Dark Nickel, Copper, Dark Brass, Dark Nickel, Vintage Brass, Gold, Matte Gold

Approval Holder:

Waterworks Ltd

Company Name

Waterworks Ltd

Address

60 Backus Ave. Danbury

Postcode

CT06810

Country

United States

Phone

2035466207

General Email

mary.kimlinger@waterworks.com

View All Listings by this Company

Range of hand showers and shower arm kits with (brass bodies - various finishes. The inlets of the hand showers and the inlet elbows incorporate approved check valve cartridges; however, the complete products have not been fully tested to demonstrate they provide backflow protection. Open outlet use only. Maximum operating temperature 65°C.

Section:

1670 Shower Outlets

Section Subtitle:

Shower kit(s)

WRAS Approval Number:

250602017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2" BSP female (with a ½” BSPP male adaptor for international use) for hand showers. 1/2" NPT male for shower arm.

Marking:

Waterworks logo on handset (BHS010, HNHS010 & CNHS10) Waterworks on escutcheon (BHS010 & BSH001CO)

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

Hand Showers: BHS010XZZ BHS010ZZ HNHS010ZZ CNHS10ZZ Shower Arm: BSH001XZZ Where XX denotes the finish and can be replaced by: AC = Antique Copper AB = Architectural Bronze AQB = Antique Brass BZ = Architectural Bronze C = Polished Chrome CO = Concordia DN = Dark Nickel G = Gold L = Lumin M = Matte Nickel MC = Matte Chrome MG = Matte Gold MS = Matte Silver N = Polished Nickel S = Silver SC = Shiny Copper SO = Sovereign UB = Unlacquered Brass Where XX denotes the handle components and can be replaced by: 0 = Less Handles 1 = Cross Handle 2 = Two‐Tone Cross Handle 3 = Coin Edge Cross Handle 10 = Solo Series Lever Handle 11 = Lever Handle 12 = Two‐Tone Lever Handle 13 = Coin Edge Lever Handle 14 = Walnut Lever Handle 15 = Leather Lever Handle 20 = Solo Series Straight Lever Handle 2A = Tandem Series Guilloche Lines Lever Handle 2B = Tandem Series Two‐Tone Lever Handle 2C = Union Series Guilloche Link Lever Handle 2D = Union Series Enamel Guilloche Lines Lever Handle 2E = Union Series Guilloche Pinstripe Lever Handle 2P = Solo Series Two‐Piece Straight Lever Handle 2S = Bond Rally Series Lever Handle 2T = Teak Lever Handle 30 = Solo Series Knob Handle 3S = Bond Rally Series Knob Handle 4A = Tandem Series Guilloche Lines Knob Handle 4B = Tandem Series Two‐Tone Guilloche Knob Handle 4D = Union Series Enamel Guilloche Lines Knob Handle 5C = Union Series Guilloche Link Knob Handle 7A = Tandem Series Guiloche Lines Lever handles with Gland Cover 7B = Tandem Series Two Tone Lever handles with Gland Cover 7C = Union Series Guiloche Link Lever handles with Gland Cover 7D = Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E = Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P = Solo Series Two Piece Straight Lever handle with Gland Cover 7S = Bond Rally Series Lever Handle With Gland Cover 7T = Tandem Series Teak lever with Gland Cover 8Z = Straight Lever Handle 90 = Solo Series Straight Lever handles with Gland Cover

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London

Postcode

WC1N2EB

Country

United Kingdom

View All Listings by this Company

Range of wall mounted shower valves (brass bodies – various finishes) incorporating a self-cancelling diverter with a ceramic cartridge headwork controlling flow and temperature and a single lever operating member. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:

2003 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control, incorporating a self-cancelling diverter between outlets.

WRAS Approval Number:

250602018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP F

Marking:

Grohe logo on operating member

Installation Requirements:

R001 R030

Expiry date:

30/06/2030

Model:

24.336.xx1 32.747.xx1 29.079.xx1 001 – Chrome DC1 – Super steel DA1 – Warm sunset AL1 – Brushed hard graphite. GL1 – cool sunrise

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Section:

2011 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control, incorporating a manual diverter between outlets.

Wall Mounted Concealed Undefinable Air Gap – See IRN’s Incorporates a check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R020

Expiry date:

30/06/2030

Notes & Further Information

Product Identification(s) with an * as suffix = models added 11/08/2025

Approval Holder:

Waterworks Ltd

Company Name

Waterworks Ltd

Address

60 Backus Ave. Danbury

Postcode

CT06810

Country

United States

Phone

2035466207

General Email

mary.kimlinger@waterworks.com

View All Listings by this Company

Range of Type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5) and flexible hose. Flow is controlled via a solenoid valve. Both inlet and outlets incorporate flow restrictor. Maximum working pressure 6.0 Bar Maximum operating temperature 60.0°C

Section:

0009 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 - Type AB - Air gap with weir overflow.

WRAS Approval Number:

250502707

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Dual layer PVC lined supply hose with ¾” BSP (F) captive nut.

Installation Requirements:

R001 R008 R574

Expiry date:

31/05/2030

Model:

DW15720/W1 DW15735/W1

Approval Holder:

ALI Group S.r.l.

Company Name

ALI Group S.r.l.

Address

Via del Lavoro, 28, 31033 Castelfranco V.to (TV), Italy

View All Listings by this Company

Range of double check valve assemblies, incorporating two spring loaded resilient trim in-line check valve cartridges housed in DZR brass. Compression connection to be used with copper pipe EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

0034 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.

WRAS Approval Number:

250504716

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

SF logo, brand of KINGFISHER, flow arrow, WRAS, size, CR, date of manufacture (MM-YY) on body. EN1254-2, size: on compression nut.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

Natural colour 03890110 - 15mm, 05316861 - 22mm,

Approval Holder:

Kingfisher International Products Ltd

Company Name

Kingfisher International Products Ltd

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Range of In-line plastic flow regulators housed within a brass bodies incorporating a plastic strainer and EPDM ‘O’-rings. Maximum working pressure 10.0 Bar Maximum operating temperature 65°C.

Section:

0435 Taps and shower valves - Components

Section Subtitle:

Aerators, Flow Straighteners, Flow Regulators and Restrictors.

WRAS Approval Number:

250688004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

HL2024, model and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

"HL2024 Control Flow 1P– ½” BSP (F) HL2024 Control Flow 1P– ½” BSP (M) HL2024 Control Flow 1P– 15mm HL2024 Control Flow 1P– ¾” BSP (M) HL2024 Control Flow 3P – 15mm HL2024 Thermastream – ¾” BSP (M) HL2024 Thermastream – S7.5 ½” BSP (M)

Approval Holder:

Cenergist Ltd

Company Name

Cenergist Ltd

Address

8 Bede House Tower Road, Glover Industrial Estate, Washington, England

Postcode

NE37 2SH

Country

United Kingdom

View All Listings by this Company

Range of deck mounted ceramic cartridge and single sequential headwork assemblies, (brass bodies – various styles and finishes), incorporating a range of operating members. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

Section:

0440 Headworks

Section Subtitle:

Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

WRAS Approval Number:

250604028

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless Steel braided EPDM lined hose assemblies incorporating 3/8” captive end connections.

Marking:

THG on body.

Installation Requirements:

R001 R010 R040

Expiry date:

30/06/2030

Model:

6523/W - ceramic cartridge headwork 6532/W - sequential ceramic cartridge headworks 6523/W Styles: A04 - Broadway - Man, A1J - Amboise Malachite, A1K - Amboise Lapis Lazuli, A1L - Amboise Jaspe rouge, A1M - Amboise Onyx noir, A1S - Cheverny Malachite, A1T - Cheverny Lapis Lazuli, A1U - Cheverny Jaspe rouge, A1V - Sully Malachite, A1W - Sully Lapis Lazuli, A1X - Sully Jaspe rouge, A2A - Métropolis cristal clair, A2B - Métropolis cristal clair - Man, A2C - Océania, A2E-Venice, A2F - Naïade, A2G-Ange, A2H - Panthère cristal clair, A2I - Perle, A2J - Papillon, A2K - Panthère cristal noir, A2L - Métropolis cristal noir, A2M - Métropolis cristal noir - Man, A2R - Masque de Femme lunaire, A2S - Masque de Femme solaire, A2T - Masque de Femme, métal gravé, A2U - Masque de Femme, métal lisse, A33 - Bambou cristal noir, A35 - Bambou cristal clair, A38 - Niagara, A52 - Broadway, A54 - Art Déco, A55 - Art Déco - Man, A56 - Art Déco Cristal, A57 - Tradition, A58 - Tradition - Man, A59 - Tradition Cristal, A60 - Marina Onyx noir, A61 - Marina métal, A6A - Profil métal, A6B - Profil métal - Man, A6G - Profil Lalique cristal clair, A6H - Profil Lalique cristal clair - Man, A6N - Profil Onyx noir, A6P - Profil Onyx noir - Man, A7A - Ithaque décor Or, A7B - Ithaque décor Platine, A7D - Capucine mauve décor Or, A7E - Capucine vert décor Platine, A7F - Marquise noir décor Or, A7G - Marquise blanc décor Platine, A8B - Vogue Améthyste, A8M - Vogue Malachite, A8N - Vogue Jaspe rouge, A8P - Vogue Onyx noir, A8R - Vogue Oeil de tigre, A8S - Vogue Lapis Lazuli, A9B - Jaipur cristal satiné, A9C - Jaipur Onyx noir, A9D - Jaipur Quartz rose, A9F - Jaipur métal, E53 - Najem, G04 - Pure, G08 - Pompadour, G13 - Rochambeau, G14 - Versailles, G1T - Beluga, G1U - Beluga - Man, G25 - 1900, G28 - 1900 - Man, G29 - Charleston, G2H - Le 9, G2J - Faubourg porcelaine blanche - Man, G2K - Faubourg porcelaine blanche, G2L - Faubourg porcelaine noire, G2M - Faubourg porcelaine noire - Man, G2N - Froufrou, G2P-Froufrou - Man, G2R - Frivole, G2S - Frivole - Man, G2T - Faubourg métal, G2U - Faubourg métal - Man, G3M - 1900 - Man. métal lisse, G47 - Vendôme, G4P - Collection "O", G50 - Tango, G58 - Spirit - Man, G5A - Nano, G5B - Nano - Man, G64 - Primo, G69 - Spirit, G6A - Métamorphose, G6B - Métamorphose - Man, G6C - Métamorphose carbone, G6D - Métamorphose céramique noire, G6E - Métamorphose céramique blanche, G75 - Charleston - Man, G78 - Tendance, G79 - Cubica, G7A - Beaubourg, G7B - Beaubourg - Man, G7C - Saint-Germain, G7D - Saint-Germain - Man, G7E - Dean, G7F-Bondi, G7G - Bondi - Man, G8A - Les Ondes, G8B - Les Ondes - Man, G9A - SYSTEM métal lisse, G9B - SYSTEM métal lisse - Man, G9C - SYSTEM métal diamant, G9D - SYSTEM métal diamant - Man, G9E - SYSTEM métal quadrillé, G9F - SYSTEM métal quadrillé - Man, G9G - SYSTEM marbre Howlite, G9H - SYSTEM marbre Howlite - Man, G9J - SYSTEM cristal, G9K - SYSTEM cristal - Man, J17 - Beverley, U1A - Mandarine métal, U1D - Mandarine cristal clair, U1E - Mandarine cristal clair satiné, U1K - Mandarine Cristallia Diamant, U1V - Cheverny Onyx noir, U2A - Le 11 by Alberto Pinto, U2B - Le 11 by Alberto Pinto - Man, U2L - Nihal porcelaine bleue, U2M - Nihal métal lisse, U2N - Nihal porcelaine ivoire, U2P - Nihal porcelaine noire, U2R - Nihal porcelaine verte, U4A - Diplomate bagues lisses, U4B - Diplomate bagues annelées, U4D - Diplomate Royale, U4E - Duomo, U4F - Duomo cristal, U6A - Pétale de Cristal clair, U6B - Pétale de Cristal bleu, U6C - Pétale de Cristal rouge, U6D - Pétale de Cristal noir, U6E - Pétale de Cristal clair liseré doré, U7A - Trocadéro Malachite, U8B - Monte Carlo porcelaine or, U8C - Monte Carlo porcelaine or blanc, U9A - West Coast croisillon métal, U9B - West Coast manette métal, U9C - West Coast croisillon guilloché lin, U9D - West Coast manette guilloché lin, U9E - West Coast croisillon onyx noir, U9F - West Coast manette onyx noir, U9G - West Coast croisillon onyx blanc, U9H - West Coast manette onyx blanc, U9K - Grand Central croisillon métal, U9L - Grand Central manette métal, U9M - Grand Central croisillon onyx noir, U9N - Grand Central manette onyx noir, U9R - Grand Central croisillon onyx blanc, U9S - Grand Central manette onyx blanc. 6532/W Styles: A04 - Broadway à manettes, A1J - Amboise Malachite, A1K - Amboise Lapis Lazuli, A1L - Amboise Jaspe rouge, A1M - Amboise Onyx noir, A1S - Cheverny Malachite, A1T - Cheverny Lapis Lazuli, A1U - Cheverny Jaspe rouge, A1V - Sully Malachite, A1W - Sully Lapis Lazuli, A1X - Sully Jaspe rouge, A2A - Métropolis cristal clair, A2B - Métropolis cristal clair à manettes, A2C - Océania, A2E - Venice, A2F - Naïade, A2G - Ange, A2H - Panthère cristal clair, A2I - Perle, A2J - Papillon, A2K - Panthère cristal noir, A2L - Métropolis cristal noir, A2M - Métropolis cristal noir à manettes, A2N - Mossi cristal clair, A2R - Masque de Femme lunaire, A2S - Masque de Femme solaire, A2T - Masque de Femme, métal gravé, A2U - Masque de Femme, métal lisse, A33 - Bambou cristal noir, A34 - Bambou cristal Ambre, A35 - Bambou cristal clair, A38 - Niagara, A41 - Dahlia, A42 - Pomme cristal clair satiné, A44 - Ellipse, A46 - Pomme cristal lustré or, A52 - Broadway, A54 - Art Déco, A55 - Art Déco à manettes, A56 - Art Déco Cristal, A57 - Tradition, A58 - Tradition à manettes, A59 - Tradition Cristal, A60 - Marina Onyx noir, A61 - Marina métal, A6A - Profil métal, A6B - Profil métal à manettes, A6G - Profil Lalique cristal clair, A6H - Profil Lalique cristal clair à manettes, A6N - Profil Onyx noir, A6P - Profil Onyx noir à manettes, A7A - Ithaque décor Or, A7B - Ithaque décor Platine, A7D - Capucine mauve décor Or, A7E - Capucine vert décor Platine, A7F - Marquise noir décor Or, A7G - Marquise blanc décor Platine, A8B - Vogue Améthyste, A8M - Vogue Malachite, A8N - Vogue Jaspe rouge, A8P - Vogue Onyx noir, A8R - Vogue Oeil de tigre, A8S - Vogue Lapis Lazuli, A9B - Jaipur cristal satiné, A9C - Jaipur Onyx noir, A9D - Jaipur Quartz rose, A9F - Jaipur métal, E53 - Najem, G04 - Pure, G08 - Pompadour, G13 - Rochambeau, G14 - Versailles, G1T - Beluga, G1U - Beluga à manettes, G24 - Amour de Trianon, G25 - 1900, G28 - 1900 à manettes, G29 - Charleston, G2H - Le 9, G2J - Faubourg porcelaine blanche à manettes, G2K - Faubourg porcelaine blanche, G2L - Faubourg porcelaine noire, G2M - Faubourg porcelaine noire à manettes, G2N - Froufrou, G2P - Froufrou à manettes, G2R - Frivole, G2S - Frivole à manettes, G2T - Faubourg métal, G2U - Faubourg métal à manettes, G31 - Cygne, G3R - Montaigne marbre Grand Antique, G3S - Montaigne marbre Grand Antique à manettes, G3T - Montaigne marbre Leonardo Grey, G3U - Montaigne marbre Leonardo Grey à manettes, G3V - Montaigne marbre blanc Vénus, G3W - Montaigne marbre blanc Vénus à manettes, G47 - Vendôme, G4P - Collection "O", G50 - Tango, G58 - Spirit à manettes, G5A - Nano, G5B - Nano à manettes, G5D - Anoa corne noire, G5E - Soho, G64 - Primo, G69 - Spirit, G6A - Métamorphose, G6B - Métamorphose à manettes, G6C - Métamorphose carbone, G6D - Métamorphose céramique noire, G6E - Métamorphose céramique blanche, G75 - Charleston à manettes, G78 - Tendance, G79 - Cubica, G7A - Beaubourg, G7B - Beaubourg à manettes, G7C - Saint - Germain, G7D - Saint - Germain à manettes, G7E - Dean, G7F - Bondi, G7G - Bondi à manettes, G8A - Les Ondes, G8B - Les Ondes à manettes, G9A - SYSTEM métal lisse, G9B - SYSTEM métal lisse à manettes, G9C - SYSTEM métal diamant, G9D - SYSTEM métal diamant à manettes, G9E - SYSTEM métal quadrillé, G9F - SYSTEM métal quadrillé à manettes, G9G - SYSTEM marbre Howlite, G9H - SYSTEM marbre Howlite à manettes, G9J - SYSTEM cristal, G9K - SYSTEM cristal à manettes, J17 - Beverley, O01 - LUXURY COLLECTION, O02 - MASTER COLLECTION, U1A - Mandarine métal, U1D - Mandarine cristal clair, U1E - Mandarine cristal clair satiné, U1K - Mandarine Cristallia Diamant, U1S - Sully Onyx blanc, U1T - Sully Onyx noir, U1V - Cheverny Onyx noir, U2A - Le 11 by Alberto Pinto, U2B - Le 11 by Alberto Pinto à manettes, U2D - INFINI porcelaine blanche, U2E - INFINI porcelaine blanche décor platine, U2F - INFINI porcelaine blanche décor or, U2K - So, U2L - Nihal porcelaine bleue, U2M - Nihal métal lisse, U2N - Nihal porcelaine ivoire,U2P - Nihal porcelaine noire, U2R - Nihal porcelaine verte, U3A - Bagatelle métal, U3B - Bagatelle métal à manettes, U3E - Bagatelle pierre noire, U3F - Bagatelle pierre noire à manettes, U4A - Diplomate bagues lisses, U4B - Diplomate bagues annelées, U4C - Diplomate bagues torsadées, U4D - Diplomate Royale, U4E - Duomo, U4F - Duomo cristal, U5A - Flore, U5B - Island, U5C - Paradise, U5D - Sun Dragon, U5E - Ginkgo, U5F - Vegetal, U5G - Moon Dragon, U5H - Jade Dragon, U5J - Rose, U6A - Pétale de Cristal clair, U6B - Pétale de Cristal bleu, U6C - Pétale de Cristal rouge, U6D - Pétale de Cristal noir, U6E - Pétale de Cristal clair liseré doré, U6F - Beyond Crystal - cristal clair, U6G - Beyond Crystal - cristal aqua, U6H - Beyond Crystal - cristal rouge, U6J - Beyond Crystal - cristal couleur champagne, U6K - Beyond Crystal - cristal bleu, U7A - Trocadéro Malachite, U7B - Trocadéro Lapis Lazuli, U7C - Trocadéro Jaspe Rouge, U7D - Trocadéro Onyx noir, U7E - Trocadéro Oeil de Tigre, U8A - Wedding, U8B - Monte Carlo porcelaine or, U8C - Monte Carlo porcelaine or blanc, U93 - Malmaison métal, U94 - Malmaison cristal, U95 - Malmaison Portoro, U97 - Malmaison Howlite, U9A - West Coast croisillon métal, U9B - West Coast manette métal, U9C - West Coast croisillon guilloché lin, U9D - West Coast manette guilloché lin, U9E - West Coast croisillon onyx noir, U9F - West Coast manette onyx noir, U9G - West Coast croisillon onyx blanc, U9H - West Coast manette onyx blanc, U9K - Grand Central croisillon métal, U9L - Grand Central manette métal, U9M - Grand Central croisillon onyx noir, U9N - Grand Central manette onyx noir, U9R - Grand Central croisillon onyx blanc, U9S - Grand Central manette onyx blanc. Styles added May 2021: A4J Hirondelle cristal clair A4K Hirondelle cristal clair décor platine A4L Hirondelle cristal clair décor Or U7G Icon-X U7H Icon-X à manettes U7J Icon-X, insert métal U7K Icon-X à manettes, insert métal U7L Icon-X, Titane U7M Icon-X à manettes, Titane U7N Icon-X, pierre à définir U7P Icon-X à manettes, pierre à définir U7S Icon-X , Carbone or U7T Icon-X à manettes, Carbone or U8D Corvair U8E Corvair à manettes U8F Corvair marbre Howlite U8G Corvair à manettes marbre Howlite U8H Corvair marbre Portoro U8J Corvair à manettes marbre Portoro U8K Corvair marbre Fior di Bosco U8L Corvair à manettes marbre Fior di Bosco U8M Corvair pierre à définir U8N Corvair à manettes pierre à définir Finishes: A02-Polished chrome ; B01-Polished nickel ; C01-Matt nickel ; D01-Lacquered light bronze ; D05-Lacquered mat bronze ; D30-Black ceram ; F01-polished gold ; F07-matt gold ; F30-soft gold ; F31-soft matt gold ; F33-Bronze brown color PVD ; F34-Matt brown bronze color PVD ; H49-Brass color PVD ; H50-Matt brass color PVD ; H52-Gold color PVD ; H53-Matt gold color PVD ;H55-nickel color PVD ; H56-Matt nickel color PVD ; H60-Matt blush color PVD ; H62-Blush color PVD ; H64-Graphite color PVD ; H65-Matt graphite color PVD ; H66-Umber color PVD ; H67-Matt umber color PVD.

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Thermostatic cartridges incorporating plastic bodies, for insertion into specifically dimensioned bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:

0442 Thermostatic cartridges

Section Subtitle:

Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.

WRAS Approval Number:

250604010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

35.09mm OD.

Marking:

Vernet & WeMix on body

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

VT35CS-004

Approval Holder:

VERNET GROUP

Company Name

VERNET GROUP

Address

21-27 route d’Arpajon Ollainville – BP31 ARPAJON

Postcode

91291

Country

France

General Email

roze@vernet.fr

View All Listings by this Company

Section:

0442 Thermostatic cartridges

Description:

A Range of Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

31/07/2030

Approval Holder:

Taizhou Xingle Plumbing Equipment Co., Ltd

Company Name

Taizhou Xingle Plumbing Equipment Co., Ltd

Address

Southeast Industrial Agglomeration Point, Songmen Town, Wenling City

Postcode

317511

Country

China

View All Listings by this Company

Manufacturers:

Taizhou Xingle Plumbing Equipment Co., Ltd.

Range of single hole, single outlet, (swivel), combination tap assemblies (chromium plated brass bodies), incorporating quarter turn ceramic disc headworks and single lever operating members. The outlet is a pull down spray type and incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.

WRAS Approval Number:

2311378

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections. 15mm compression – (137040 models only)

Marking:

WIX on Body

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2028

Model:

173904 Loose Coil Tap Brushed 137040BN

Approval Holder:

Wickes PLC

Company Name

Wickes PLC

Address

Vision House, Colonial Way, Watford.

Postcode

WD24 4JL

Country

United Kingdom

Phone

01923 656600

General Email

Steven.ferry@wickes.co.uk

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass bodies), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull down spray type and incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.

WRAS Approval Number:

2311379

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating 15mm compression connections.

Marking:

WIX on Body

Installation Requirements:

R001 R090

Expiry date:

30/11/2028

Model:

170100 Simeto Mono Mixer 311150 Simeto Monobloc Pull out Kitchen Mixer Chrome

Approval Holder:

Wickes PLC

Company Name

Wickes PLC

Address

Vision House, Colonial Way, Watford.

Postcode

WD24 4JL

Country

United Kingdom

Phone

01923 656600

General Email

Steven.ferry@wickes.co.uk

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass bodies), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet is a waterfall type and incorporates a stainless steel mesh at the spout. Maximum working Pressure 10.0 bar. Maximum operating temperature 65ºC.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

251104001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless Steel braided, EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end compression end connections.

Marking:

DTC53 on rear, Deva on the handle.

Installation Requirements:

R001 R006 R010 R160

Expiry date:

30/11/2030

Model:

SPA2313 SCY313

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener or a plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

240988032

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

nabis on operating member

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2029

Model:

A05668 & A05669

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

251112001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible inlet hose assemblies incorporating either ½” or 3/8” captive nut end connections

Marking:

Hanyun on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2030

Model:

3663602299707, 5059340505800, 3663602299905, 5059340505886, 3663602299929, 3663602301288, 3663602300809, 3663602301561, 3663602300625, 3663602300106, 3663602299745, 3663602300823, 3663602300922, 5059340185644, 5059340185651, 5059340185620

Approval Holder:

ZHEJIANG HANYUN HARDWARE CO., LTD.

Company Name

ZHEJIANG HANYUN HARDWARE CO., LTD.

Address

NO. 51, KAIYUAN ROAD DONGHUA SUB- DISTRICT LONGYOU COUNTY, QUZHOU, ZHEJIANG

Postcode

ZIP: 324400

Country

China

View All Listings by this Company

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Capable of achieving AUK3 Tap Gap IRN R160 only applies to SL-T10102

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010 R160

Expiry date:

31/07/2030

Notes & Further Information

Various finish: (1) Without suffix to current model number: Chrome plated (2) With suffix B: Black (3) With suffix BB: Brushed brass (4) Models SL-T40202 & SL-T40102W with suffix G: Champagne Gold

Approval Holder:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturers:

Taizhou Shenglang Sanitary Ware Co, Ltd.

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Stainless Steel braided EPDM lined inlet hoses Click-waste not verified by test. Capable of achieving AUK3 Tap gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2030

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Stainless Steel braided EPDM lined inlet hoses. Click type waste not verified by test. Capable of achieving AUK3 Tap gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2030

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Combination Tap assemblies incorporating ceramic cartridge or ceramic disc headworks.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2310405

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

WIX on body

Installation Requirements:

R001 R006 R020

Expiry date:

31/10/2028

Model:

170097 Fiora Mono Mixer, 311149 Fiora Monobloc Kitchen Mixer Chrome, 170098 Fiora Mono Mixer, 311160 Fiora Monobloc Kitchen Mixer Brushed Nickle, 313071 Fiora Mono Mixer Matt Black, 313072 Fiora Mono Mixer Brushed Brass 173901 Cone Monobloc Mixer Chrome,

Approval Holder:

Wickes PLC

Company Name

Wickes PLC

Address

Vision House, Colonial Way, Watford.

Postcode

WD24 4JL

Country

United Kingdom

Phone

01923 656600

General Email

Steven.ferry@wickes.co.uk

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes), incorporating a quarter turn ceramic disc headworks and single lever operating members, with a pull out spray retained within a holster. The spout outlet incorporates a plastic aerator and the spout incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

251204002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided EPDM flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.

Marking:

DEVA (brand of Methven) on front of body. DTC, 25 (brand of Methven) on rear of body.

Installation Requirements:

R001 R006 R010

Expiry date:

31/12/2030

Model:

ABN104 BRG104

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Range of single hole, single outlet, (swivel) combination tap assemblies, (brass bodies – various finishes) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

260204001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided EPDM lined hose assembies incorporating ½” captive nut end connections.

Marking:

DEVA on front of body. DTC, 25 on rear of body for PTN104.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

28/02/2031

Model:

WTN104 MAL104 PTN104

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly with a brass body (chromium plated brass), incorporating ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250608017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

PET braided HDPE lined flexible hose assemblies with ½” BSP captive nut end connections.

Marking:

Dolphin Solutions Ltd logo on rear of body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/06/2030

Model:

DB2100.a.bbb. Where ‘aaa’ denotes the additional external surface finish (which is a non-water contact area) when applied. It can be one, two or three digits, which can be any combination of numbers and/or letters. As examples: ‘PVD’ or ‘.5’ to denote a PVD finish has been applied, ‘PC’ to denote a powder coat has been applied or alternatively .5. Examples of coatings include but is not limited to PVD, powder coating and ceramic coating. Where ‘yy’ denotes the external surface colour (which is a non-water contact area) where applicable. It will always be 2 digits, which can be any combination of numbers and/or letters. As examples: 01 = RAL9005 Black, 51 = PVD Gold finish. Also note the ‘-‘can be replaced/interchanged with a ‘.’ in the SKU – example DBS.xxx.yy.

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (plated brass), incorporating ceramic cartridge headwork with dome type operating member, located at the end of the spout. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250608020

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies with ¾” BSP captive nut end connection.

Marking:

Vado logo etched on mixer body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/06/2030

Model:

CAM-150-XXX. Suffixes that replace XXX to denote colour finish: MB - Matt Black, MW - Matt White, SBR - Satin Brass, CP or C/P - Chrome.

Approval Holder:

VADO

Company Name

VADO

Address

Cheddar Business Park Wedmore Road Cheddar Somerset

Postcode

BS27 3EB

Country

United Kingdom

Phone

01934 745895

General Email

tom.ross@vado.com

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator or flow straightener. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

2311922

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

WIX on rear of body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2028

Model:

232776 Zores Monobloc Sink Mixer - Chrome 232775 Zores Monobloc Sink Mixer - Brushed Nickle 232774 Zores Monobloc Sink Mixer - Antique Brass 173898 Contemporary Monobloc Sink Mixer - Chrome 173902 Contemporary Monobloc Sink Mixer - Brushed Nickle 180982 Toba Dual Lever Tap - Chrome 170428 Toba Mono Mixer - Brushed Nickle 313086 Toba Mono Mixer - Brushed Brass. 311144 Toba Monobloc Kitchen Mixer - Chrome 311148 Toba Monobloc Kitchen Mixer - Brushed Nickle 180981 Cosa Mono Mixer - Chrome 311143 Cosa Monoblock Kitchen Mixer Tap - Chrome 223122 Kumai Tap - Matt Black 223123 Kumai Tap - Brushed Gold

Approval Holder:

Wickes PLC

Company Name

Wickes PLC

Address

Vision House, Colonial Way, Watford.

Postcode

WD24 4JL

Country

United Kingdom

Phone

01923 656600

General Email

Steven.ferry@wickes.co.uk

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator or a plastic flow straightener. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

240704069

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided EPDM/PEX lined flexible hose assemblies with ½" captive nut end connections.

Marking:

WIX on body

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2029

Model:

170430 Vittoria Mono Mixer Brushed Nickle 170429 Vittoria Mono Kitchen Mixer Chrome 313073 Vittoria Dual Lever Mixer Matt Black 313074 Vittoria Dual Lever Mixer Gold 313075 Vittoria Dual Lever Mixer Gun Metal 313083 Vittoria Mono Mixer Matt Black 313084 Vittoria Mono Mixer Brushed Brass 313085 Vittoria Mono Mixer Gun Metal 311146 Vittoria Monobloc Kitchen Mixer Brushed Nickle 311147 Vittoria Mono Mixer Chrome .

Approval Holder:

Wickes PLC

Company Name

Wickes PLC

Address

Vision House, Colonial Way, Watford.

Postcode

WD24 4JL

Country

United Kingdom

Phone

01923 656600

General Email

Steven.ferry@wickes.co.uk

View All Listings by this Company

Section:

0480 Combination Tap Assemblies

Description:

A Single hole tap(s) with a double outlet and a fixed spout.

Deck Mounted. Stainless steel braided EPDM lined inlet hoses. Capable of achieving AUK3 Tap Gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006

Expiry date:

31/08/2030

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of deck mounted, two hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes), incorporating ceramic disc headwork (GE08) or non rising spindle headwork (CR26) with single lever and cross top operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250604026

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M)

Marking:

DEVA, DTC 59 on rear body.

Installation Requirements:

R001 R010 R040

Expiry date:

30/06/2030

Model:

GE08 GE08/501 (GOLD) CR26 CR26/501 (GOLD)

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Section:

0510 Combination Tap Assemblies

Description:

A Two hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Capable of achieving AUK2 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R005 R010

Expiry date:

30/06/2030

Notes & Further Information

The model without a suffix indicates chrome. The model number with suffix B indicates black. The model number with suffix BB indicates Brushed brass.

Approval Holder:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturers:

Taizhou Shenglang Sanitary Ware Co, Ltd.

Range of two hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes) incorporating quarter turn ceramic disc headwork with single lever type operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic aerator and the product is also supplied with a shower handset and hose. The inlet of the shower handset incorporates a plastic flow regulator. The product is supplied with either plastic or metal backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

250708018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

Huanri on rear of tap body.

Installation Requirements:

R001 R006 R020

Expiry date:

31/07/2030

Model:

1003BD18 Chrome plated, 1003BD18BN Nickel plated, 1003BD18BK Matt Black.

Approval Holder:

Zhejiang Huanri Sanitation Co,.Ltd.

Company Name

Zhejiang Huanri Sanitation Co,.Ltd.

Address

Xuanmen Industrial Zone, Lupu Town Yuhuan County Zhejiang Province

Country

China

View All Listings by this Company

Range of wall mounted thermostatic shower valves (plated brass bodies), incorporating ceramic disc headworks controlling the flow and a thermostatic cartridge independently controlling the temperature, both using dome type operating members. Both inlets incorporate single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection) and metal strainers. Spout outlets incorporate plastic flow straighteners. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

250608021

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm compression.

Marking:

Vado logo etched on body

Installation Requirements:

R001 R020

Expiry date:

30/06/2030

Model:

CAM-123T-XXX T - Thermostatic Suffixes that replace XXX to denote colour finish: MB- Matt Black, MW- Matt White, SBR- Satin Brass CP or C/P - Chrome.

Product Images

Approval Holder:

VADO

Company Name

VADO

Address

Cheddar Business Park Wedmore Road Cheddar Somerset

Postcode

BS27 3EB

Country

United Kingdom

Phone

01934 745895

General Email

tom.ross@vado.com

View All Listings by this Company

Section:

0520 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

Deck Mounted Capable of achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R020

Expiry date:

31/07/2030

Notes & Further Information

Model added February 2026: RP3 ELE BSM C

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Section:

0520 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

Deck Mounted. Incorporates hose retainer. Capable of achieving AUK2 Tap Gap. IRN160 only applies to Waterfall Spout model SL-T10101.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R020 R160

Expiry date:

31/07/2030

Approval Holder:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturers:

Taizhou Shenglang Sanitary Ware Co, Ltd.

Range of two-hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator or flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar Maximum operating temperature 65°C.

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

240804006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

WIX on body

Installation Requirements:

R001 R006 R010

Expiry date:

31/08/2029

Model:

173896 Traditional Bridge Tap Chrome 223124 Zores Bridge Tap Antique Brass 207009 Seattle Bridge Mixer Tap

Approval Holder:

Wickes PLC

Company Name

Wickes PLC

Address

Vision House, Colonial Way, Watford.

Postcode

WD24 4JL

Country

United Kingdom

Phone

01923 656600

General Email

Steven.ferry@wickes.co.uk

View All Listings by this Company

Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies (DZR brass main body - various finishes) incorporating quarter turn ceramic disc headworks with single lever or cross top operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250604021

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½ “ BSP (M).

Marking:

Axor on the spout.

Installation Requirements:

R001 R010 R040

Expiry date:

30/06/2030

Model:

16 532 xx0 AXOR Montreux 3-hole basin mixer for concealed installation wall-mounted with spout 165 - 225 mm and cross handles 16 534 xx0 AXOR Montreux 3-hole basin mixer for concealed installation wall-mounted with spout 165 - 225 mm and lever handles 39 143 xx0 AXOR Citterio 3-hole basin mixer for concealed installation wall-mounted with spout 222 mm, cross handles and escutcheons 39 144 xx0 AXOR Citterio 3-hole basin mixer for concealed installation wall-mounted with spout 226 mm, cross handles and plate 39 147 xx0 AXOR Citterio 3-hole basin mixer for concealed installation wall-mounted with spout 222 mm, lever handles and escutcheons 39 148 xx0 AXOR Citterio 3-hole basin mixer for concealed installation wall-mounted with spout 226 mm, lever handles and plate 39 313 xx0 AXOR Citterio 3-hole basin mixer for concealed installation wall-mounted with spout 162 mm, cross handles and escutcheons 39 315 xx0 AXOR Citterio 3-hole basin mixer for concealed installation wall-mounted with spout 162 mm, lever handles and escutcheons Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Section:

0650 Combination Tap Assemblies

Description:

A Range of Three hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Stainless steel braided EPDM lined inter-connecting hoses Capable of achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2030

Notes & Further Information

These models only different in surface treatment

Approval Holder:

ALFRED VICTORIA LIMITED

Company Name

ALFRED VICTORIA LIMITED

Postcode

B45 9AL

View All Listings by this Company

Manufacturers:

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Section:

0650 Combination Tap Assemblies

Description:

A Range of Three hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Capable of achieving AUK3 Tap Gap Stainless-steel braided EPDM lined connection hoses

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2030

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of three-hole, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes) incorporating quarter turn ceramic disc headworks with single lever or cross top operating members. The spout outlets incorporate plastic aerators. The products incorporate stainless steel braided, silicone rubber (TPSiV) lined inter-connecting hoses. The products are supplied with metal back nuts and click type pop-up wastes (not verified by test). Maximum working pressure: 6.0 Bar. Maximum operating temperature: 65°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250688002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Waterworks on spout.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/06/2030

Model:

DSLS01 (cross top) DSLS10 (single lever) DSLS20 (cross top) DSLS30 (single lever)

Approval Holder:

Waterworks Ltd

Company Name

Waterworks Ltd

Address

60 Backus Ave. Danbury

Postcode

CT06810

Country

United States

Phone

2035466207

General Email

mary.kimlinger@waterworks.com

View All Listings by this Company

Range of plastic filter heads and housings. Maximum working pressure 8.6 bar. Cold water use only.

Section:

1050 Filters and Housings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Aqua Cure Ltd. model and operating parameters on adhesive label on body.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

30/06/2030

Model:

Filter heads - ¼” & 3/8” Push Fit: 22010240 & 22010245. Filter housings - 32.55mm ØD to 32.71mm ØD: 22012458, 22000542, 22000548, 22000540 & 22000566. 22000454 – ¼” push fit.

Product Images

Approval Holder:

Aqua Cure Limited

Company Name

Aqua Cure Limited

Address

3A & 3B Dakota business park Dakota way Burscough Lancashire

Postcode

L408AF

Country

United Kingdom

Phone

01704 516916

General Email

Phill.mayer@aquacure.co.uk

View All Listings by this Company

‘GM50xx’ range of stainless steel (SS304 or SS316L) press-fit fittings incorporating EPDM ‘O’-rings for use with *- STPT304 and *- STPT316 stainless steel pipes. The GM5004 prefix models also incorporates an EPDM gasket on the union nut. Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250615009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15 - 108mm. ½” - 3” BSP (M). ½” - 2” BSP (F).

Marking:

Kasinpress (brand of WENZHOU KASIN VALVE PIPE FITTING CO., LTD), size, WRAS and material grade on fitting body. WRAS, Kasinpress (brand of WENZHOU KASIN VALVE PIPE FITTING CO., LTD), size, material grade, EN10312 and date of manufacture (YYYY/MM) on pipe.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Adapter 90 with female thread: GM5016-1505: 15×Rp½. GM5016-1805: 18×Rp½. GM5016-22075: 22×Rp¾. Adapter with female thread: GM5002-1505: 15×Rp½. GM5002-1805: 18×Rp½. GM5002-22075: 22×Rp¾. GM5002-281: 28×Rp1. GM5002-351025: 35×Rp1¼. GM5002-42105: 42×Rp1½. GM5002-542: 54×Rp2. Bridge with plain ending: GM5035-18: 18. GM5035-22: 22. GM5035-28: 28. Cap: GM5024-15: 15. GM5024-18: 18. GM5024-22: 22. GM5024-28: 28. GM5024-35: 35. GM5024-42: 42. GM5024-54: 54. GM5024-76: 76.1. GM5024-89: 88.9. GM5024-108: 108. Elbow 45 with press ending: GM5008-15: 15. GM5008-18: 18. GM5008-22: 22. GM5008-28: 28. GM5008-35: 35. GM5008-42: 42. GM5008-54: 54. GM5008-76: 76.1. GM5008-89: 88.9. GM5008-108: 108. Elbow 45 with plain ending: GM5009-15: 15. GM5009-18: 18. GM5009-22: 22. GM5009-28: 28. GM5009-35: 35. GM5009-42: 42. GM5009-54: 54. GM5009-76: 76.1. GM5009-89: 88.9. GM5009-108: 108. Elbow 90 with press ending: GM5006-15: 15. GM5006-18: 18. GM5006-22: 22. GM5006-28: 28. GM5006-35: 35. GM5006-42: 42. GM5006-54: 54. GM5006-67: 66.7. GM5006-76: 76.1. GM5006-89: 88.9. GM5006-108 -108. Elbow 90 with female thread: GM5021-1505: 15×Rp½. GM5021-1805: 18×Rp½. GM5021-22075: 22×Rp¾. GM5021-281: 28×Rp1. GM5021-351025: 35×Rp1¼. GM5021-42105: 42×Rp1½. GM5021-542: 54×Rp2. Elbow: 90 with: male thread: GM5010-1505: 15×R½. GM5010-1805: 18×R½. GM5010-22075: 22×R¾ Elbow 90 with plain ending: GM5007-15: 15. GM5007-18: 18. GM5007-22: 22. GM5007-28: 28. GM5007-35: 35. GM5007-42: 42. GM5007-54: 54. GM5007-76: 76.1. GM5007-89: 88.9. GM5007-108: 108. Reducer coupling with plain ending: GM5005-1815: 18×15. GM5005-2218: 22×18. GM5005-2818: 28×18. GM5005-3522: 35×22. GM5005-3528: 35×28. GM5005-4222: 42×22. GM5005-4228: 42×28. GM5005-4235: 42×35. GM5005-5428: 54×28. GM5005-5435: 54×35. GM5005-5442: 54×42. Reducer coupling with press ending: GM5011-1815: 18×15. GM5011-2215: 22×15. GM5011-2218: 22×18. GM5011-2815: 28×15. GM5011-2818: 28×18. GM5011-2822: 28×22. GM5011-3515: 35×15. GM5011-3518: 35×18. GM5011-3522: 35×22. GM5011-3528: 35×28. GM5011-4215: 42×15. GM5011-4218: 42×18. GM5011-4222: 42×22. GM5011-4228: 42×28. GM5011-4235: 42×35. GM5011-5415: 54×15. GM5011-5418: 54×18. GM5011-5422: 54×22. GM5011-5428: 54×28. GM5011-5435: 54×35. GM5011-5442: 54×42. GM5011-6735: 66.7×35. GM5011-6754: 66.7×54. GM5011-7654: 76.1×54. GM5011-8954: 88.9×54. GM5011-8976: 88.9×76.1. GM5011-10854: 108×54. GM5011-10876: 108×76.1. GM5011-10889: 108×88.9. Reducer Tee with press ending: GM5015-1815: 18×15×18. GM5015-2215: 22×15×22. GM5015-2218: 22×18×22. GM5015-2815: 28×15×28. GM5015-2818: 28×18×28. GM5015-2822: 28×22×28. GM5015-3522: 35×22×35. GM5015-3528: 35×28×35. GM5015-4222: 42×22×42. GM5015-4228: 42×28×42. GM5015-4235: 42×35×42. GM5015-5422: 54×22×54. GM5015-5428: 54×28×54. GM5015-5435: 54×35×54. GM5015-5442: 54×42×54. GM5015-7642: 76.1×42×76.1. GM5015-7654: 76.1×54×76.1. GM5015-8954: 88.9×54×88.9 GM5015-10854: 108×54×108. GM5015-10876: 108×76.1×108. GM5015-10889: 108×88.9×108 Equal coupling with press ending: GM5001-15: 15. GM5001-18: 18. GM5001-22: 22 GM5001-28: 28. GM5001-35: 35. GM5001-42: 42. GM5001-54: 54. GM5001-67: 66.7. GM5001-76: 76.1. GM5001-89: 88.9. GM5001-108: 108 Adapter with male thread: GM5003-1505: 15×R½. GM5003-1805: 18×R½. GM5003-18075: 18×R¾. GM5003-2205: 22×R½. GM5003-22075: 22×R¾. GM5003-281: 28×R1. GM5003-351025: 35×R1¼. GM5003-42105: 42×R1½. GM5003-542: 54×R2. GM5003-76205: 76.1×R2½. GM5003-893: 88.9×R3. Slip coupling with press ending: GM5019-15: 15. GM5019-18: 18. GM5019-22: 22. GM5019-28: 28. GM5019-35: 35. GM5019-42: 42 GM5019-54: 54. Tee with press ending: GM5012-15: 15. GM5012-18: 18. GM5012-22: 22. GM5012-28: 28. GM5012-35: 35. GM5012-42: 42. GM5012-54: 54. GM5012-76: 76.1. GM5012-89: 88.9. GM5012-108: 108. Tee with male thread: GM5013-1505: 15×R½. GM5013-1805: 18×R½. GM5013-2205: 22×R½. GM5013-22075: 22×R¾. GM5013-2805: 28×R½. GM5013-28075: 28×R¾. GM5013-281: 28×R1. GM5013-3505: 35×R½. GM5013-351025: 35×R1¼. GM5013-421025: 42×R1¼. GM5013-54105: 54×R1½. GM5013-542: 54×R2. Tee with female thread:: GM5014-1505: 15×Rp½. GM5014-1805: 18×Rp½. GM5014-2205: 22×Rp½. GM5014-22075: 22×Rp¾. GM5014-2805: 28×R½. GM5014-28075: 28×Rp¾. GM5014-281: 28×Rp1. GM5014-3505: 35×Rp½. GM5014-351025: 35×Rp1¼. GM5014-421025: 42×Rp1¼. GM5014-54105: 54×1½. GM5014-542: 54×Rp2. Adaptor with union nut: GM5004-1505: 15×G½. GM5004-1805: 18×G½. GM5004-18075: 18×G¾. GM5004-2205: 22×G½. GM5004-22075: 22×G¾. GM5004-221: 22×G1. GM5004-281: 28×G1. GM5004-351025: 35×G1¼. GM5004-421075: 42×G1¾. GM5004-542: 54×G2. Stainless steel pipe (SS304 or SS316L): *- STPT304 (SS304). *- STPT316L (SS316L). Where * = size in mm between 15 and 108 (in whole numbers: 15, 18, 22, 28, 35, 42, 54, 66.7, 76.1, 88.9, 108).

Approval Holder:

WENZHOU KASIN VALVE PIPE FITTING CO., LTD

Company Name

WENZHOU KASIN VALVE PIPE FITTING CO., LTD

Address

NO.2‐1802 Caizhi Building, No. 88, Binhang Road, Yongzhong Sub‐District, Longwan District, Wenzhou, Zhejiang

Country

China

View All Listings by this Company

Range of stainless-steel press fittings with EPDM ‘O’-rings for use with stainless-steel pipe to EN10312. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

GD Press, size, 304L, model number on body.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Coupling GDC5001 OD15 GDC5002 OD18 GDC5003 OD22 GDC5004 OD28 GDC5005 OD35 GDC5006 OD42 GDC5007 OD54 GDC6501 OD66.7 GDC5008 OD76.1 GDC5009 OD88.9 GDC5010 OD108 Long Coupling GDC5011 OD15 GDC5012 OD18 GDC5013 OD22 GDC5014 OD28 GDC5015 OD35 GDC5016 OD42 GDC5017 OD54 GDC6502 OD66.7 GDC5018 OD76.1 GDC5019 OD88.9 GDC5020 OD108 Reducer with Plain End GDC5021 OD18×OD15 GDC5022 OD22×OD15 GDC5023 OD22×OD18 GDC5024 OD28×OD15 GDC5025 OD28×OD18 GDC5026 OD28×OD22 GDC5048 OD35×OD15 GDC5027 OD35×OD18 GDC5029 OD35×OD22 GDC5030 OD35×OD28 GDC5031 OD42×OD15 GDC5032 OD42×OD18 GDC5033 OD42×OD22 GDC5034 OD42×OD28 GDC5035 OD42×OD35 GDC5036 OD54×OD15 GDC5037 OD54×OD18 GDC5038 OD54×OD22 GDC5039 OD54×OD28 GDC5040 OD54×OD35 GDC5041 OD54×OD42 GDC6503 OD66.7×OD42 GDC6504 OD66.7×OD54 GDC5028 OD76.1×OD42 GDC5042 OD76.1×OD54 GDC6505 OD76.1×OD66.7 GDC5049 OD88.9×OD42 GDC5043 OD88.9×OD54 GDC6506 OD88.9×OD66.7 GDC5044 OD88.9×OD76.1 GDC5045 OD108×OD54 GDC6507 OD108×OD66.7 GDC5046 OD108×OD76.1 GDC5047 OD108×OD88.9 90° Elbow GDC6051 OD15 GDC6052 OD18 GDC6053 OD22 GDC6054 OD28 GDC6055 OD35 GDC6056 OD42 GDC6057 OD54 GDC6511 OD66.7 GDC6058 OD76.1 GDC6059 OD88.9 GDC6060 OD108 90° Elbow with Plain End GDC6071 OD15 GDC6072 OD18 GDC6073 OD22 GDC6074 OD28 GDC6075 OD35 GDC6076 OD42 GDC6077 OD54 GDC6512 OD66.7 GDC6078 OD76.1 GDC6079 OD88.9 GDC6080 OD108 45° Elbow GDC6101 OD15 GDC6102 OD18 GDC6103 OD22 GDC6104 OD28 GDC6105 OD35 GDC6106 OD42 GDC6107 OD54 GDC6513 OD66.7 GDC6108 OD76.1 GDC6109 OD88.9 GDC6110 OD108 45° Elbow with Plain End GDC6121 OD15 GDC6122 OD18 GDC6123 OD22 GDC6124 OD28 GDC6125 OD35 GDC6126 OD42 GDC6127 OD54 GDC6514 OD66.7 GDC6128 OD76.1 GDC6129 OD88.9 GDC6130 OD108 Tee GDC5181 OD15 GDC5182 OD18 GDC5183 OD22 GDC5184 OD28 GDC5185 OD35 GDC5186 OD42 GDC5187 OD54 GDC6515 OD66.7 GDC5188 OD76.1 GDC5189 OD88.9 GDC5190 OD108 Reducing Tee GDC5191 OD18×OD15 GDC5192 OD22×OD15 GDC5193 OD22×OD18 GDC5194 OD28×OD15 GDC5195 OD28×OD18 GDC5196 OD28×OD22 GDC5197 OD35×OD15 GDC5198 OD35×OD18 GDC5199 OD35×OD22 GDC5200 OD35×OD28 GDC5201 OD42×OD15 GDC5202 OD42×OD18 GDC5203 OD42×OD22 GDC5204 OD42×OD28 GDC5205 OD42×OD35 GDC5206 OD54×OD15 GDC5207 OD54×OD18 GDC5208 OD54×OD22 GDC5209 OD54×OD28 GDC5210 OD54×OD35 GDC5211 OD54×OD42 GDC6517 OD66.7×OD22 GDC6518 OD66.7×OD28 GDC6519 OD66.7×OD35 GDC6520 OD66.7×OD42 GDC6521 OD66.7×OD54 GDC5212 OD76.1×OD22 GDC5213 OD76.1×OD28 GDC5214 OD76.1×OD35 GDC5215 OD76.1×OD42 GDC5216 OD76.1×OD54 GDC6522 OD76.1×OD66.7 GDC5217 OD88.9×OD22 GDC5218 OD88.9×OD28 GDC5219 OD88.9×OD35 GDC5220 OD88.9×OD42 GDC5221 OD88.9×OD54 GDC6523 OD88.9×OD66.7 GDC5222 OD88.9×OD76.1 GDC5223 OD108×OD22 GDC5224 OD108×OD28 GDC5225 OD108×OD35 GDC5226 OD108×OD42 GDC5227 OD108×OD54 GDC6524 OD108×OD66.7 GDC5228 OD108×OD76.1 GDC5229 OD108×OD88.9 Tee with Male Thread End GDC5231 OD15×R1/2 GDC5232 OD18×R1/2 GDC5239 OD22×R1/2 GDC5233 OD22×R3/4 GDC5234 OD22×R1 GDC5240 OD28×R1/2 GDC5283 OD28×R3/4 GDC5235 OD28×R1 GDC5281 OD35×Rp3/4 GDC5236 OD35×Rp1 1/4 GDC5237 OD42×Rp1 1/2 GDC5282 OD54×Rp1/2 GDC5238 OD54×Rp2 Tee with Female Thread End GDC5241 OD15×Rp1/2 GDC5242 OD18×Rp1/2 GDC5243 OD18×Rp3/4 GDC5244 OD22×Rp1/2 GDC5245 OD22×Rp3/4 GDC5246 OD28×Rp1/2 GDC5247 OD28×Rp3/4 GDC5248 OD28×Rp1 GDC5249 OD35×Rp1/2 GDC5250 OD35×Rp3/4 GDC5262 OD35×Rp1 GDC5263 OD35×Rp1 1/4 GDC5251 OD42×Rp1/2 GDC5252 OD42×Rp3/4 GDC5264 OD42×Rp1 GDC5265 OD42×Rp1 1/2 GDC5253 OD54×Rp1/2 GDC5254 OD54×Rp3/4 GDC5266 OD54×Rp1 GDC5255 OD54×Rp2 GDC6531 OD66.7×Rp1/2 GDC6532 OD66.7×Rp3/4 GDC6533 OD66.7×Rp1 1/2 GDC5256 OD76.1×Rp3/4 GDC5257 OD76.1×Rp2 GDC5258 OD88.9×Rp3/4 GDC5259 OD88.9×Rp2 GDC5260 OD108×Rp3/4 GDC5261 OD108×Rp2 Adaptor with Male Thread End GDC5360 OD15×R3/8 GDC5361 OD15×R1/2 GDC5362 OD15×R3/4 GDC5363 OD18×R1/2 GDC5364 OD18×R3/4 GDC5365 OD22×R1/2 GDC5366 OD22×R3/4 GDC5367 OD22×R1 GDC5368 OD28×R3/4 GDC5369 OD28×R1 GDC5370 OD28×R1 1/4 GDC5371 OD35×R1 GDC5372 OD35×R1 1/4 GDC5373 OD35×R1 1/2 GDC5374 OD42×R1 1/4 GDC5375 OD42×R1 1/2 GDC5376 OD54×R1 1/2 GDC5377 OD54×R2 GDC6541 OD66.7×R2 1/2 GDC5378 OD76.1×R2 1/2 GDC5379 OD88.9×R3 GDC5380 OD108×R4 Adaptor with Female Thread End GDC5381 OD15×Rp1/2 GDC5382 OD15×Rp3/4 GDC5383 OD18×Rp1/2 GDC5384 OD18×Rp3/4 GDC5385 OD22×Rp1/2 GDC5386 OD22×Rp3/4 GDC5387 OD22×Rp1 GDC5388 OD28×Rp3/4 GDC5389 OD28×Rp1 GDC5390 OD28×Rp1 1/4 GDC5391 OD35×Rp1 GDC5392 OD35×Rp1 1/4 GDC5393 OD35×Rp1 1/2 GDC5394 OD42×Rp1 1/4 GDC5395 OD42×Rp1 1/2 GDC5396 OD54×Rp1 1/2 GDC5397 OD54×Rp2 GDC6542 OD66.7×Rp2 1/2 GDC5398 OD76.1×Rp2 1/2 GDC5399 OD88.9×Rp3 GDC5400 OD108×Rp4 Cap GDC5421 OD15 GDC5422 OD18 GDC5423 OD22 GDC5424 OD28 GDC5425 OD35 GDC5426 OD42 GDC5427 OD54 GDC6542 OD66.7 GDC5428 OD76.1 GDC5429 OD88.9 GDC5430 OD108 Adaptor with Union Nut GDC5341 OD15×G1/2 GDC5353 OD15×G3/4 GDC5342 OD18×G1/2 GDC5343 OD18×G3/4 GDC5345 OD22×G1 GDC5347 OD28×G1 GDC5348 OD28×G1 1/4 GDC5359 OD35×G1 1/4 GDC5350 OD35×G1 1/2 GDC5351 OD42×G1 3/4 GDC5346 OD42×G1 1/2 GDC5356 OD54×G2 GDC5352 OD54×G2 3/8 Adaptor with Union with Female thread GDC5451 OD15×Rp1/2 GDC5452 OD15×Rp3/4 GDC5453 OD18×Rp1/2 GDC5454 OD18×Rp3/4 GDC5455 OD22×Rp3/4 GDC5456 OD22×Rp1 GDC5457 OD28×Rp1 GDC5458 OD35×Rp1 1/4 GDC5459 OD42×Rp1 1/2 GDC5460 OD54×Rp2 Adaptor Union with Male Thread GDC5431 OD15×R1/2 GDC5432 OD15×R3/4 GDC5433 OD18×R1/2 GDC5434 OD18×R3/4 GDC5435 OD22×R1/2 GDC5436 OD22×R3/4 GDC5437 OD22×R1 GDC5438 OD28×R1 GDC5439 OD35×R1 1/4 GDC5440 OD42×R1 1/2 GDC5441 OD54×R2 Adaptor Union GDC5471 OD15 GDC5472 OD18 GDC5473 OD22 GDC5474 OD28 GDC5475 OD35 GDC5476 OD42 GDC5477 OD54 Flange with Pressing Socket GDC5301 OD15 GDC5302 OD18 GDC5303 OD22 GDC5304 OD28 GDC5305 OD35 GDC5306 OD42 GDC5307 OD54 GDC6536 OD66.7 GDC5308 OD76.1 GDC5309 OD88.9 GDC5310 OD108

Approval Holder:

Grande-tek Flow Control Co., Ltd

Company Name

Grande-tek Flow Control Co., Ltd

Address

Industrial Zone of Yunhe District, Fuyang Road, Cangzhou, Hebei

Postcode

061000

Country

China

View All Listings by this Company

‘Uponor Q&E’ range of brass press-fit fittings for use with PE-Xa-PE-PE ‘Uponor Aqua Pipe AU’ multi-layered pipes. Maximum operating pressure 10 bar. Maximum operating temperature 70°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604025

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

16mm – 25mm, ½” – 1”.

Marking:

Pipe - Uponor, size, PN, temperature, SDR & PE-Xa. Fittings - Uponor logo, size and other technical information.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Uponor Aqua Pipe AU 3-layer pipes: 1126786 - Uponor Aqua Pipe AU 16x2,2 100 mt, 1126787 - Uponor Aqua Pipe AU 20x2,8 100 mt, 1126788 - Uponor Aqua Pipe AU 25x3,5 50mt. Brass fittings: Uponor Q&E Coupling LL: 1126789 - 16x16, 1126790 - 20x20, 1126791 - 25x25. Uponor Q&E Reducer LL: 1126792 - 20x16, 1126793 - 25x16, 1126794 - 25x20. Uponor Q&E Elbow LL: 1126795 - 16x16, 1126796 - 20x20, 1126797 - 25x25. Uponor Q&E Tee LL: 1126798 - 16x16x16, 1126799 - 20x20x20, 1126800 - 25x25x25. Uponor Q&E Tee Reducer LL: 1126801 - 16x20x16, 1126802 - 20x16x16, 1126803 - 20x16x20, 1126804 - 20x20x16, 1126805 - 25x16x25, 1126806 - 25x20x25. Uponor Q&E Plug LL: 1126807 - 16, 1126808 - 20. Uponor Q&E Adapter Female LL: 1126809 - 16-Rp1/2", 1126810 - 20-Rp1/2", 1126811 - 20-Rp3/4", 1126812 - 20-Rp1", 1126813 - 25-Rp1". Uponor Q&E Adapter Male LL: 1126814 - 16-R1/2", 1126815 - 16-R3/4", 1126816 - 20-R1/2", 1126817 - 20-R3/4", 1126818 - 20-R1", 1126819 - 25-R3/4", 1126820 - 25-R1". Uponor Q&E Adapter Swivel Nut: 1126821 - 16-1/2", 1126822 - 20-1/2", 1126823 - 20-3/4", 1126824 - 25-3/4", 1126825 - 25-1". Uponor Q&E Elbow Swivel Nut: 1126826 - 16-1/2", 1126827 - 20-1/2". Uponor Q&E Tap Elbow LL: 1126828 - 16-1/2", 1126829 - 20-1/2", 1126830 - 20-3/4". Uponor Q&E Elbow Adapter Male LL: 1126831 - 16-G1/2", 1126832 - 20-G1/2", 1126833 - 20-R1/2", 1126834 - 20-G3/4", 1126871 - 25-G3/4". Uponor Q&E Elbow Adapter Female LL: 1126835 - 16-1/2", 1126836 - 20-3/4", 1126837 - 25-3/4". Uponor Q&E Tee female LL: 1126838 - 25-1/2"-25, 1126839 - 25-3/4"-25. Uponor Q&E BP-Elbow LL: 1126841 - 16-1/2" MT L = 65 MM, 1126842 - 16-1/2" MT L = 90 MM, 1126843 - 16-1/2" MT L = 175 MM, 1126844 - 16-1/2" MT L = 200 MM, 1126845 - 20-1/2"MT L = 95 MM, 1126846 - 20-1/2"MT L = 200 MM, 1126847 - 20-3/4" MT L = 100 MM. Uponor Q&E Brass Adapter LL: 1126848 - 16-15 CU, 1126849 - 20-15 CU, 1126850 - 20-3/4" CU, 1126851 - 25-1" CU. Uponor Q&E Brass Adapter LL PRESS: 1126852 - 16-1/2" CU, 1126853 - 20-3/4" CU, 1126854 - 25-1" CU. Uponor Q&E adapter male thread PL: 1023003 - 16-R1/2"MT, 1023005 - 20-R1/2"MT, 1023007 - 25-R3/4"MT. Uponor Smart Aqua tap elbow term. box Q&E UP PL: 1047935 - 16-Rp1/2"FT. Uponor Smart Aqua tap elbow term. box Q&E SP PL: 1047932 - 20-Rp1/2"FT, 1047933 - 25-Rp3/4"FT.

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

U Profile range of press fittings incorporating EPDM ‘O’-rings. For use with MONFLEX PEXB/AL/PEXB MULTILAYER PIPES. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2304380

Size:

16-32mm. BSP threaded connections: ½” - 1½” (M) or (F).

Marking:

Fitting: Ebrille & size Pipe: Ebrille and product info on pipe.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

EBRILLE 'U' FITTINGS Straight: REM16X16 REM18X18 REM20X20 REM25X25 REM32X32 Reduced straight: REMR20X16 REMR20X18 REMR25X16 REMR25X18 REMR25X20 REMR26X16 REMR26X18 REMR26X20 REMR32X16 REMR32X18 REMR32X20 REMR32X25 REMR32X26 Male straight: REDFM16X1/2 REDFM16X3/4 REDFM18X1/2 REDFM20X1/2 REDFM20X1 REDFM25X1/2 REDFM25X3/4 REDFM25X1 REDFM26X1/2 REDFM26X3/4 REDFM26X1 REDFM32X1/2 REDFM32X3/4 REDFM32X1 REDFM32X11/4 REDFM32X11/2 Female straight: REDFF16X1/2 REDFF16X3/4 REDFF16X1 REDFF18X1/2 REDFF18X3/4 REDFF20X1/2 REDFF20X3/4 REDFF20X1 REDFF25X1/2 REDFF25X3/4 REDFF25X1 REDFF26X1/2 REDFF26X3/4 REDFF26X1 REDFF32X1/2 REDFF32X3/4 REDFF32X1 REDFF32X11/4 REDFF32X11/2 Elbow: RE90°16X16 RE90°18X18 RE90°20X20 RE90°25X25 RE90°26X26 RE90°32X32 Male elbow: RE90°FM16X1/2 RE90°FM16X3/4 RE90°FM18X1/2 RE90°FM18X3/4 RE90°FM20X1/2 RE90°FM20X3/4 RE90°FM20X1 RE90°FM25X1/2 RE90°FM25X3/4 RE90°FM25X1 RE90°FM26X1/2 RE90°FM26X3/4 RE90°FM26X1 RE90°FM32X1/2 RE90°FM32X3/4 RE90°FM32X1 RE90°FM32X11/4 Female elbow: RE90°FF16X1/2 RE90°FF16X3/4 RE90°FF18X1/2 RE90°FF18X3/4 RE90°FF20X1/2 RE90°FF20X3/4 RE90°FF20X1 RE90°FF25X1/2 RE90°FF25X3/4 RE90°FF25X1 RE90°FF26X1/2 RE90°FF26X3/4 RE90°FF26X1 RE90°FF32X1/2 RE90°FF32X3/4 RE90°FF32X1 RE90°FF32X1 1/4 Wall plated elbow: RE90°M16X1/2 RE90°M16X3/4 RE90°M18X1/2 RE90°M20X1/2 RE90°M20X3/4 Tee: RET16X16X16 RET18X18X18 RET20X20X20 RET25X25X25 RET26X26X26 RET32X32X32 Reduced tee: RETR16X20X16 RETR16X25X16 RETR16X26X16 RETR18X16X18 RETR18X20X18 RETR18X25X18 RETR18X26X18 RETR20X16X20 RETR20X18X20 RETR20X25X20 RETR25X16X25 RETR25X16X16 RETR26X16X16 RETR25X18X25 RETR25X20X25 RETR25X32X25 RETR20X26X20 RETR26X16X26 RETR26X18X26 RETR26X20X26 RETR26X32X26 RETR32X16X32 RETR32X18X32 RETR32X20X32 RETR32X25X32 RETR25X16X20 RETR32X20X25 RETR26X16X20 RETR32X20X26 RETR20X16X16 RETR20X20X16 RETR25X25X18 RETR25X25X20 RETR25X18X18 RETR25X20X20 RETR25X16X20 RETR32X20X25 RETR26X26X16 RETR26X26X18 RETR26X26X20 RETR26X18X18 RETR26X20X20 RETR26X20X16 RETR32X20X26 RETR32X32X16 RETR32X32X20 RETR32X32X26 RETR32X25X25 RETR32X26X26 RETR32X26X32 Male tee: RETFM16X1/2X16 RETFM16X3/4X16 RETFM20X1/2X20 RETFM20X3/4X20 Female tee: RETFF16X1/2X16 RETFF16X3/4X16 RETFF18X1/2X18 RETFF18X3/4X18 RETFF20X1/2X20 RETFF20X3/4X20 RETFF20X1X20 RETFF25X1/2X25 RETFF25X3/4X25 RETFF25X1X25 RETFF26X1X26 RETFF26X3/4X26 RETFF26X1X26 RETTFF32X1/2X32 RETFF32X3/4X32 RETFF32X1X32 RETFF32X11/4X32 Cap: REC16 REC18 REC20 REC25 REC26 REC32 Female union: REDFFL16X1/2 REDFFL16X3/4 REDFFL20X1/2 REDFFL20X3/4 REDFFL25X1/2 REDFFL25X3/4 REDFFL25X1 REDFFL26X1/2 REDFFL26X3/4 REDFFL26X1 REDFFL32X1 TO BE USED WITH MONOFLEX PEXB/ALPEXB MULTILAYER PIPES: MZ16X2MONFLEXMT100 MZ16X2MONFLEXMT200 MZ16X2MONFLEXMT400 MZ18X2MONFLEXMT100 MZ20X2MONFLEXMT100 MZ20X2MONFLEXMT200 MZ20X2MONFLEXMT400 MZ25X2,5MONFLEXMT100 MZ26X3MONFLEXMT100 MZ32X3MONFLEXMT100

Approval Holder:

Ebrille s.r.l.

Company Name

Ebrille s.r.l.

Address

Administration and Esablishment, Straded Canelli, 53A - 14049 Nizza Monferrato AT

Country

Italy

View All Listings by this Company