Range of expansion vessels with galvanised or stainless-steel inlets, incorporating butyl rubber diaphragms. The inlet incorporates a plastic strainer (all models, except for WD model). For maximum working pressures please refer to model.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

1000 Expansion Vessels

WRAS Approval Number:

2210343

Note:

Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.

Size:

Existing models and models added February 2023: ¾” BSP (M). Models added April 2023: 22mm compression.

Marking:

Existing models and models added February 2023: Reflex, address, pressure rating, volume, serial number and other technical information on an adhesive label on the body. Models added April 2023: Reflex, model, pressure rating, volume, year of manufacture (MM.YYYY) and other technical information on an adhesive label on the body.

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

The number in the model indicates capacity in litres: Refix DD 2: maximum working pressure 10 bar. Refix DD 4: 10 bar. Refix DD 7: 10 bar. Refix DD 8: 10 bar. Refix DD 12: 10 bar. Refix DD 18: 10 bar. Refix DD 8: 16 bar. Refix DD 12: 16 bar. Refix DD 8: 25 bar. Refix DT 2: 10 bar. Refix DE 2: 10 bar. Refix DE 4: 10 bar. Refix DE 8: 10 bar. Refix DE 12: 10 bar. Refix DE 18: 10 bar. Refix DE 8: 16 bar. Refix DE 12: 16 bar. Refix DE 8: 25 bar. Refix WD 0.165:10 bar. Models added February 2023: Refix DD Galv 2: 10 bar. Refix DD Galv 4: 10 bar. Refix DD Galv 7: 10 bar. Refix DD Galv 8: 10 bar. Refix DD Galv 12: 10 bar. Refix DE 18: 10 bar. Refix DE ‘E’ 2: 10 bar. Refix DE ‘E’ 4: 10 bar. Refix DE ‘E’ 8: 10 bar. Refix DE ‘E’ 12: 10 bar. Refix D DE ‘E’ 18: 10 bar. Models added April 2023: Refix DE 12 (M22C): 10 bar. Refix DE 18 (M22C): 10 bar.

Approval Holder:

Reflex Winkelmann GmbH

Company Name

Reflex Winkelmann GmbH

Address

Gersteinstrasse 19, D-59227 Ahlen

Country

germany

View All Listings by this Company

Range of Protecta-line multilayer pipes manufactured to BS EN8588, PE100 63mm to 355mm and PE80 25mm to 32mm. For use with : Mechanical compression fittings: 25-32mm (PE80 pipe), 63mm (PE100 multi pipe) Electrofusion fittings: 63-355mm (PE100pipe) Mechanical clamp-on fittings: 63-180mm (PE100pipe) PE to Copper Pipe Coupler transition fittings are for use with copper pipe (BS EN 1057) For below ground use. Maximum working pressure: 10 bar when used with SDR17 PE100 Protecta-Line pipes 12.5 bar when used with SDR11 PE80 Protecta-Line pipes 16 bar when used with SDR11 PE100 Protecta-Line pipes 12.5bar when used with copper pipe.

Section:

1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer

Section Subtitle:

Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.

WRAS Approval Number:

2211042

Note:

Cold Water Use Only

Size:

See Models

Marking:

Protecta-Line PE pipe with AL barrier, size, SDR and pressure rating printed on pipe. Compression fitting – Philmac moulded into the compression nut. Clamp-on fittings –GPS & technical information Electrofusion fittings - Frialen and technical information moulded into electrofusion fitting body. Pipes have longitudinal impressed and printed markings. PE Fittings and acetal fittings have engraved marking on body, plus labels, plus further marking on bags. Stainless steel fittings have name on shell and no marking on the pipe inserts

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

Mechanical PE to PE couplers (SDR 11) 44100307: 25mm Compression x 25mm Compression, 44100308: 32mm Compression x 32mm Compression, 44100311: 63mm Compression x 63mm Compression. Mechanical PE to copper couplers (SDR 11) 44996005: 25mm Compression x 15mm Compression, 44996006: 25mm Compression x 22mm Compression, 44996007: 32mm Compression x 28mm Compression. Mechanical PE to PE reducing couplers (SDR 11) 44114409: 32mm Compression x 25mm Compression, 44114412: 63mm Compression x 25mm Compression, 44114415: 63mm Compression x 32mm Compression. Mechanical equal tees (SDR 11) 44122307: 25mm Compression x 25mm Compression, 44122308: 32mm Compression x 32mm Compression, 44122311: 63mm Compression x 63mm Compression. Mechanical 90 elbows (SDR 11) 44115307: 25mm Compression, 44115308: 32mm Compression, 44115311: 63mm Compression. Mechanical end connectors - male (SDR 11) 44151608: 25mm Compression x 3/4" BSP (M), 44151611: 32mm Compression x 3/4" BSP (M), 44151612: 32mm Compression x 1" BSP (M), 44151628: 63mm Compression x 1 1/2" BSP (M), 44151629: 63mm Compression x 2” BSP (M). Mechanical end connectors - female (SDR 11) 44101608: 25mm Compression x 3/4" BSP (F), 44101612: 32mm Compression x 1" BSP (F), 44101629: 63mm Compression x 2" BSP (F). Mechanical 90 elbows x female (SDR 11) 44396608: 25mm Compression x 3/4" BSP (F), 44396612: 32mm Compression x 1" BSP (F), 44396629: 63mm Compression x 2” BSP (F). Mechanical ductile iron ferrule – male (SDR 11) 44762407: 25mm Compression x 3/4” BSP (M) Mechanical reducing sets (SDR 11) 44105409: 32mm x 25mm Compression. Clamp-on couplers (SDR 11 & 17) PM110311: 63mm Clamp, PM100313: 90mm Clamp, PM109313: 90mm Clamp, PM100314: 110mm Clamp, PM109314: 110mm Clamp, PM100315: 125mm Clamp, PM109315: 125mm Clamp, PM100317: 160mm Clamp, PM109317: 160mm Clamp, PM100318: 180mm Clamp, PM109318: 180mm Clamp. Clamp-on repair couplers (SDR 11 & 17) PM246311: 63mm Clamp, PM246313: 90mm Clamp, PM245313: 90mm Clamp, PM246314: 110mm Clamp, PM245314: 110mm Clamp, PM246315: 125mm Clamp, PM245315: 125mm Clamp, PM246317: 160mm Clamp, PM245317: 160mm Clamp, PM246318: 180mm Clamp, PM245318: 180mm Clamp. Clamp-on reducers (SDR 11 & 17) PM441459: 90mm Clamp x 63mm Clamp, PM441483: 110mm Clamp x 90mm Clamp, PM440483: 110mm Clamp x 90mm Clamp, PM441493: 125mm Clamp x 110mm Clamp, PM440493: 125mm Clamp x 110mm Clamp, PM441504: 160mm Clamp x 125mm Clamp, PM440504: 160mm Clamp x 125mm Clamp, PM440505: 180mm Clamp x 125mm Clamp. Clamp-on 90 elbows (SDR 11 & 17) PM209311: 63mm Clamp, PM210313: 90mm Clamp, PM208313: 90mm Clamp, PM210314: 110mm Clamp, PM208314: 110mm Clamp, PM210315: 125mm Clamp, PM208315: 125mm Clamp, PM210317: 160mm Clamp, PM208317: 160mm Clamp, PM210318: 180mm Clamp, PM208318: 180mm Clamp. Clamp-on 45 elbows (SDR 11 & 17) PM215311: 63mm Clamp, PM216313: 90mm Clamp, PM214313: 90mm Clamp, PM216314: 110mm Clamp, PM214314: 110mm Clamp, PM216315: 125mm Clamp, PM214315: 125mm Clamp, PM216317: 160mm Clamp, PM214317: 160mm Clamp, PM216318: 180mm Clamp, PM214318: 180mm Clamp. Clamp-on equal tees (SDR 11 & 17) PM221311: 63mm Clamp, PM222313: 90mm Clamp, PM220313: 90mm Clamp, PM222314: 110mm Clamp, PM220314: 110mm Clamp, PM222315: 125mm Clamp, PM220315: 125mm Clamp, PM222317: 160mm Clamp, PM220317: 160mm Clamp, PM222318: 180mm Clamp, PM220318: 180mm Clamp. Clamp-on duckfoot bends (SDR 11 & 17) PM384459: 63mm Clamp, PM384313: 90mm Clamp, PM385313: 90mm Clamp, PM384314: 110mm Clamp, PM385314: 110mm Clamp, PM385484: 125mm Clamp, PM385486: 160mm Clamp, PM385487: 180mm Clamp. Clamp-on flanged branch tees (SDR 11 & 17) PM351313: 90mm Clamp, PM363313: 90mm Clamp, PM351314: 110mm Clamp, PM363314: 110mm Clamp, PM363315: 25mm Clamp, PM363317: 160mm Clamp, PM363318: 180mm Clamp, PM352313: 90mm Clamp, PM364313: 90mm Clamp, PM352314: 10mm Clamp, PM364314: 110mm Clamp, PM364315: 125mm Clamp, PM364317: 160mm Clamp, PM364318: 180mm Clamp, PM365317: 60mm Clamp, PM365318: 180mm Clamp. Clamp-on stub flanges (SDR 11 & 17) PM227311: 63mm Clamp, PM228311: 63mm Clamp, PM228313: 90mm Clamp, PM226313: 90mm Clamp, PM228314: 110mm Clamp, PM226314: 110mm Clamp, PM228315: 125mm Clamp, PM226315: 125mm Clamp, PM228317: 160mm Clamp, PM226317: 160mm Clamp, PM228318: 180mm Clamp, PM226318: 180mm Clamp. Electrofusion couplers MB (SDR 11) PF612687: 90mm Electrofusion, PF612688: 110mm Electrofusion, PF612689: 125mm Electrofusion, PF612691: 160mm Electrofusion. Electrofusion couplers UB (SDR 11) PF612672: 180mm Electrofusion, PF612674: 225mm Electrofusion, PF612675: 250mm Electrofusion, PF615073: 280mm Electrofusion, PF612670: 315mm Electrofusion, PF615074: 355mm Electrofusion. Electrofusion reducers MR (SDR 11) PF615693: 110mm Electrofusion x 90mm Electrofusion, PF615694: 125mm Electrofusion x 90mm Electrofusion, PF616510: 125mm Electrofusion x 110mm Electrofusion, PF615695: 160mm Electrofusion x 110mm Electrofusion, PF616511 180mm Electrofusion x 125mm Electrofusion. Electrofusion equal tees (SDR 11) PF612166: 90mm Electrofusion, PF612167: 110mm Electrofusion, PF612168: 125mm Electrofusion, PF615277: 160mm Electrofusion, PF615691: 180mm Electrofusion. Electrofusion 90 elbows (SDR 11) PF612103: 90mm Electrofusion, PF612105: 110mm Electrofusion, PF612107: 125mm Electrofusion, PF615276: 160mm Electrofusion, PF615689: 180mm Electrofusion. Electrofusion 45 elbows (SDR 11) PF612102: 90mm Electrofusion, PF612104: 110mm Electrofusion, PF612106: 125mm Electrofusion PF615275: 160mm Electrofusion, PF615687: 180mm Electrofusion. Electrofusion flanged branch tees PF301313: 90mm Electrofusion x 80mm Electrofusion, PF301314: 110mm Electrofusion x 80mm Electrofusion, PF301315: 125mm Electrofusion x 80mm Electrofusion, PF301317: 160mm Electrofusion x 80mm Electrofusion, PF301318: 180mm Electrofusion x 80mm Electrofusion, PF302313: 90mm Electrofusion x 100mm Electrofusion, PF302314: 110mm Electrofusion x 100mm Electrofusion, PF302315: 125mm Electrofusion x 100mm Electrofusion, PF302317: 160mm Electrofusion x 100mm Electrofusion, PF302318: 180mm Electrofusion x 100mm Electrofusion, PF303317: 160mm Electrofusion x 150mm Electrofusion, PF303318: 180mm Electrofusion x 150mm Electrofusion. Electrofusion flange adaptor kits PF251313: 90mm Electrofusion x 80mm Electrofusion, PF251314: 110mm Electrofusion x 100mm Electrofusion, PF250315: 125mm Electrofusion x 100mm Electrofusion, PF250317: 160mm Electrofusion x 150mm Electrofusion, PF250318: 180mm Electrofusion x 150mm Electrofusion, PF250320: 225mm Electrofusion x 200mm Electrofusion, PF250534: 250mm Electrofusion x 200mm Electrofusion, PF250321: 250mm Electrofusion x 250mm Electrofusion, PF250322: 280mm Electrofusion x 250mm Electrofusion, PF250543: 315mm Electrofusion x 250mm Electrofusion, PF250323: 315mm Electrofusion x 300mm Electrofusion, PF250547: 355mm Electrofusion x 300mm Electrofusion, PF250324: 355mm Electrofusion x 350mm Electrofusion.

Product Images

Approval Holder:

Aliaxis UK Ltd.

Company Name

Aliaxis UK Ltd.

Address

35 St Peter’s Road, Huntingdon

Postcode

PE29 7DA

Country

United Kingdom

Phone

01622852761

General Email

david.cousins@aliaxis.com

View All Listings by this Company

Range of solder ring copper fittings for use with copper tube to EN 1057. The SRBTC015, SRBTC022, SRSTC015, SRSTC022 & SRSTC015 Models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208818

Size:

Solder ring: 8mm-54mm and ½” - 1” (see model). Threaded connections: 1” captive nut (see model).

Marking:

Lawton Tubes Logo, size &EN1254 on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

SREL008 8MM X 90 DEGREE ELBOW SOLDER RING SREL010 10MM X 90 DEGREE ELBOW SOLDER RING SREL015 15MM X 90 DEGREE ELBOW SOLDER RING SREL022 22MM X 90 DEGREE ELBOW SOLDER RING SREL028 28MM X 90 DEGREE ELBOW SOLDER RING SREL035 35MM X 90 DEGREE ELBOW SOLDER RING SREL042 42MM X 90 DEGREE ELBOW SOLDER RING SREL054 54MM X 90 DEGREE ELBOW SOLDER RING SRELS015 15MM X 90 DEGREE STREET ELBOW SOLDER RING SRELS022 22MM X 90 DEGREE STREET ELBOW SOLDER RING SRELS028 28MM X 90 DEGREE STREET ELBOW SOLDER RING SRCP008 8MM COUPLER SOLDER RING SRCP010 10MM COUPLER SOLDER RING SRCP015 15MM COUPLER SOLDER RING SRCP022 22MM COUPLER SOLDER RING SRCP028 28MM COUPLER SOLDER RING SRCP035 35MM COUPLER SOLDER RING SRCP042 42MM COUPLER SOLDER RING SRCP054 54MM COUPLER SOLDER RING SRTE015 15MM EQUAL TEE SOLDER RING SRTE022 22MM EQUAL TEE SOLDER RING SRTE028 28MM EQUAL TEE SOLDER RING SRTE035 35MM EQUAL TEE SOLDER RING SRTE042 42MM EQUAL TEE SOLDER RING SRTE054 54MM EQUAL TEE SOLDER RING SREL01545 15MM X 45 DEGREE ELBOW SOLDER RING SREL02245 22MM X 45 DEGREE ELBOW SOLDER RING SREL02845 28MM X 45 DEGREE ELBOW SOLDER RING SREL03545 35MM X 45 DEGREE ELBOW SOLDER RING SREL04245 42MM X 45 DEGREE ELBOW SOLDER RING SREL05445 54MM X 45 DEGREE ELBOW SOLDER RING SRSTC0151/2 15MM X 1/2" TAP CONNECTOR SOLDER RING SRSTC0223/4 22MM X 3/4" STRAIGHT TAP CONN SOLDER RING SRSTC0153/4 15MM X 3/4" STRAIGHT TAP CONN SOLDER RING SRSC015 15MM SLIP COUPLER SOLDER RING SRSC022 22MM SLIP COUPLER SOLDER RING SRSC028 28MM SLIP COUPLER SOLDER RING SRTE0222215 22MM X 22MM X 15MM REDUCER TEE SOLDER RING SRTE0221522 22MM X 15MM X 22MM REDUCER TEE SOLDER RING SRTE0221515 22MM X 15MM X 15MM REDUCER TEE SOLDER RING SRTE0282815 28MM X 28MM X 15MM REDUCER TEE SOLDER RING SRTE0282822 28MM X 28MM X 22MM REDUCER TEE SOLDER RING SRTE0424222 42MM X 42MM X 22MM REDUCER TEE SOLDER RING SRTE0353515 35MM X 35MM X 15MM REDUCER TEE SOLDER RING SRTE0353522 35MM X 35MM X 22MM REDUCER TEE SOLDER RING SRTE0424215 42MM X 42MM X 15MM REDUCER TEE SOLDER RING SRTE0545415 54MM X 54MMX X 15MM REDUCER TEE SOLDER RING SRTE0151522 15MM X 15MM X 22MM REDUCER TEE SOLDER RING SRTE0353528 35MM X 35MM X 28MM REDUCER TEE SOLDER RING SRTE0281528 28MM X 15MM X 28MM REDUCER TEE SOLDER RING SRTE0282222 28MM X 22MM X 22MM REDUCER TEE SOLDER RING SRTE0424228 42MM X 42MM X 28MM REDUCER TEE SOLDER RING SRTE0545422 54MM X 54MM X22MM REDUCER TEE SOLDER RING SRTE0545428 54MM X 54MM X28MM REDUCER TEE SOLDER RING SRTE0545442 54MM X 54MM X 42MM REDUCER TEE SOLDER RING SRTE0545435 54MM X 54MM X 35MM REDUCER TEE SOLDER RING SRTE0282228 28MM X 22MM X 28MM REDUCER TEE SOLDER RING SRTE0424235 42MM X 42MM X 35MM REDUCER TEE SOLDER RING SRTE0282215 28MM X 22MM X 15MM REDUCER TEE SOLDER RING SRRED02215 22MM X 15MM FITTING REDUCER SOLDER RING SRRED02822 28MM X 22MM FITTING REDUCER SODLER RING SRRED03528 35MM X 28MM FITTING REDUCER SODLER RING SRRED02815 28MM X 15MM FITTING REDUCER SODLER RING SRRED04235 42MM X 35MM FITTING REDUCER SODLER RING SRRED03522 35MM X 22MM FITTING REDUCER SODLER RING SRRED05442 54MM X 42MM FITTING REDUCER SODLER RING SRRED04222 42MM X 22MM FITTING REDUCER SODLER RING SRRED04228 42MM X 28MM FITTING REDUCER SODLER RING SRRED03515 35MM X 15MM FITTING REDUCER SODLER RING SRRED05435 54MM X 35MM FITTING REDUCER SODLER RING SRRED05428 54MM X 28MM FITTING REDUCER SODLER RING SRRED04215 42MM X 15MM FITTING REDUCER SODLER RING SRRED05422 54MM X 22MM FITTING REDUCER SODLER RING SRRED05415 54MM X 15MM FITTING REDUCER SODLER RING SRRED01510 15MM X 10MM FITTING REDUCER SODLER RING SRRED0158 15MM X 8MM FITTING REDUCER SODLER RING SREC015 15MM END CAP SOLDER RING SREC022 22MM END CAP SOLDER RING SREC028 28MM END CAP SOLDER RING SREC035 35MM END CAP SOLDER RING SREC054 54MM END CAP SOLDER RING SREC042 42MM END CAP SOLDER RING SRBTC0151/2 15MM X 1/2" BENT TAP CONN SOLDER RING SRBTC0223/4 22MM X 3/4" BENT TAP CONN SOLDER RING SRCP02215 22MM X 15MM REDUCING COUPLING SOLDER RING SRCP02815 28MM X 15MM REDUCING COUPLER SOLDER RING SRCP02822 28MM X 22MM REDUCING COUPLER SOLDER RING SRCP04235 42MM X 35MM REDUCING COUPLER SOLDER RING

Approval Holder:

Lawton Tube Company Limited.

Company Name

Lawton Tube Company Limited.

Address

Torrington Avenue Tile Hill Coventry

Postcode

CV4 9AB

View All Listings by this Company

Range of solder ring copper fittings for use with copper tube to BS EN 1057. Maximum working pressure 16 bar. Maximum working temperature 99°C

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2210060

Size:

15MM, 22MM, 28MM, 35MM, 42MM, 54MM

Marking:

Brymec, EN1254 and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

30289 Solder ring coupler 15mm 30290 Solder ring coupler 22mm 30291 Solder ring coupler 28mm 30292 Solder ring coupler 35mm 30293 Solder ring coupler 42mm 30294 Solder ring coupler 54mm 30390 Solder ring reducing coupler 22mm x 15mm 30374 Fitting reducer 22mm x 15mm 30375 Fitting reducer 28mm x 15mm 30376 Fitting reducer 28mm x 22mm 30377 Fitting reducer 35mm x 15mm 30378 Fitting reducer 35mm x 22mm 30379 Fitting reducer 35mm x 22mm 30380 Fitting reducer 42mm x 15mm 30381 Fitting reducer 42mm x 22mm 30382 Fitting reducer 42mm x 28mm 30383 Fitting reducer 42mm x 35mm 30384 Fitting reducer 54mm x 22mm 30385 Fitting reducer 54mm x 28mm 30386 Fitting reducer 54mm x 35mm 30387 Fitting reducer 54mm x 42mm 30393 90° Street elbow 15mm 30394 90° Street elbow 22mm 30395 90° Street elbow 28mm 30320 90° elbow 15mm 30321 90° elbow 22mm 30322 90° elbow 28mm 30323 90° elbow 35mm 30324 90° elbow 42mm 30325 90° elbow 54mm 30331 45° elbow 15mm 30332 45° elbow 22mm 30333 45° elbow 28mm 30334 45° elbow 35mm 30335 45° elbow 42mm 30336 45° elbow 54mm 30345 Equal tee 15mm 30346 Equal tee 22mm 30347 Equal tee 28mm 30348 Equal tee 35mm 30349 Equal tee 42mm 30350 Equal tee 54mm 30423 Reducing tee 15mm x 15mm x 22mm 30424 Reducing tee 22mm x 15mm x 15mm 30425 Reducing tee 22mm x 15mm x 22mm 30426 Reducing tee 22mm x 22mm x 15mm Model name/s of secondary products 30427 Reducing tee 22mm x 22mm x 28mm 30429 Reducing tee 28mm x 15mm x 15mm 30430 Reducing tee 28mm x 15mm x 28mm 30431 Reducing tee 28mm x 22mm x 15mm 30432 Reducing tee 28mm x 22mm x 22mm 30433 Reducing tee 28mm x 22mm x 28mm 30434 Reducing tee 28mm x 28mm x 15mm 30435 Reducing tee 28mm x 28mm x 22mm 30436 Reducing tee 35mm x 35mm x 15mm 30437 Reducing tee 35mm x 35mm x 22mm 30438 Reducing tee 35mm x 35mm x 28mm 30439 Reducing tee 42mm x 42mm x 15mm 30440 Reducing tee 42mm x 42mm x 22mm 30441 Reducing tee 42mm x 42mm x 28mm 30442 Reducing tee 42mm x 42mm x 35mm 30449 Reducing tee 54mm x 54mm x 15mm 30443 Reducing tee 54mm x 54mm x 22mm 30446 Reducing tee 54mm x 54mm x 28mm 30447 Reducing tee 54mm x 54mm x 35mm 30448 Reducing tee 54mm x 54mm x 42mm 30359 End caps 15mm 30360 End caps 22mm 30361 End caps 28mm 30362 End caps 35mm 30363 End caps 42mm 30364 End caps 54mm

Approval Holder:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

Country

United Kingdom

General Email

Jeremy.douglas@brymec.com

View All Listings by this Company

Range of solder ring brass fittings for use with copper tube (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211819

Size:

Solder ring: 15mm-54mm (see model). Threaded connections: ¼”-2” BSP (see model).

Marking:

Lawton Tubes Logo , size & EN1254 on body

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

SRCPMI0151/2 15MM X 1/2" STRAIGHT MALE CONN SOLDER RING SRCPMI0223/4 22MM X 3/4" STRAIGHT MALE CONN SOLDER RING SRCPMI0281 28MM X 1" STRAIGHT MALE CONN SOLDER RING SRCPMI03511/4 35MM X 11/4" STRAIGHT MALE CONN SOLDER RING SRCPMI04211/2 42MM X 11/2" STRAIGHT MALE CONN SOLDER RING SRCPMI0542 54MM X 2" STRAIGHT MALE CONN SOLDER RING SRCPFI0151/2 15MM X 1/2" STRAIGHT FEMALE CONNECTOR SOLDER RING SRCPFI0223/4 22MM X 3/4" STRAIGHT FEMALE CONNECTOR SOLDER RING SRCPFI0281 28MM X 1" STRAIGHT FEMALE CONNECTOR SOLDER RING SRCPFI03511/4 35MM X 1 1/4" STRAIGHT FEMALE CONN SOLDER RING SRCPFI04211/2 42MM X 1 1/2" STRAIGHT FEMALE CONN SOLDER RING SRCPFI0542 54MM X 2" STRAIGHT FEMALE CONNECTOR SOLDER RING SRTEFI015151/2 15X1/2" FEMALE BRANCH TEE SOLDER RING SRTEFI022221/2 22X1/2" FEMALE BRANCH TEE SOLDER RING SRTEFI028281/2 28X1/2" FEMALE BRANCH TEE SOLDER RING SRELB0151/2 15MM X 1/2" ELBOW BACKPLATE SOLDER RING SRELMI0151/2 15MM X 1/2" MALE ELBOW SOLDER RING

Approval Holder:

Lawton Tube Company Limited.

Company Name

Lawton Tube Company Limited.

Address

Torrington Avenue Tile Hill Coventry

Postcode

CV4 9AB

View All Listings by this Company

‘Flowflex,’ ‘Lamontite’ and ‘Opal’ ranges of brass, DZR brass, chromium plated brass, nickel plated brass and DZR brass compression fittings for use with copper pipe to BS EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211336

Size:

See models.

Marking:

FLOWFLEX, Size, EN1542-2, UK or UK Made OPAL, Size, EN1254-2 LAMONTITE, Size, EN1254-2 and UK on compression nut. CR on DZR models.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

P901.02 Flowflex Brass Compression Straight Coupling 8mm, P901.03 Flowflex Brass Compression Straight Coupling 10mm, P901.04 Flowflex Brass Compression Straight Coupling 12mm, P901.05 Flowflex Brass Compression Straight Coupling 15mm, P901.08 Flowflex Brass Compression Straight Coupling 22mm, P901.09 Flowflex Brass Compression Straight Coupling 28mm, OP901.05 Opal Brass Compression Straight Coupling 15mm, OP901.08 Opal Brass Compression Straight Coupling 22mm, OP901.09 Opal Brass Compression Straight Coupling 28mm, L901.02 Lamontite Brass Compression Straight Coupling 8mm, L901.03 Lamontite Brass Compression Straight Coupling 10mm, L901.04 Lamontite Brass Compression Straight Coupling 12mm, L901.05 Lamontite Brass Compression Straight Coupling 15mm, L901.08 Lamontite Brass Compression Straight Coupling 22mm, L901.09 Lamontite Brass Compression Straight Coupling 28mm, P901DR.02 Flowflex DZR Brass Compression Straight Coupling 8mm, P901DR.03 Flowflex DZR Brass Compression Straight Coupling 10mm, P901DR.04 Flowflex DZR Brass Compression Straight Coupling 12mm, P901DR.05 Flowflex DZR Brass Compression Straight Coupling 15mm, P901DR.08 Flowflex DZR Brass Compression Straight Coupling 22mm, P901DR.09 Flowflex DZR Brass Compression Straight Coupling 28mm, L901DR.02 Lamontite DZR Brass Compression Straight Coupling 8mm, L901DR.03 Lamontite DZR Brass Compression Straight Coupling 10mm, L901DR.04 Lamontite DZR Brass Compression Straight Coupling 12mm, L901DR.05 Lamontite DZR Brass Compression Straight Coupling 15mm, L901DR.08 Lamontite DZR Brass Compression Straight Coupling 22mm, L901DR.09 Lamontite DZR Brass Compression Straight Coupling 28mm, P901.14 Flowflex Brass Compression Reducing Coupling 10 x 8mm, P901.15 Flowflex Brass Compression Reducing Coupling 12 x 8mm, P901.16 Flowflex Brass Compression Reducing Coupling 12 x 10mm, P901.17 Flowflex Brass Compression Reducing Coupling 15 x 8mm, P901.18 Flowflex Brass Compression Reducing Coupling 15 x 10mm, P901.19 Flowflex Brass Compression Reducing Coupling 15 x 12mm, P901.20 Flowflex Brass Compression Reducing Coupling 22 x 15mm, P901.21 Flowflex Brass Compression Reducing Coupling 28 x 15mm, P901.22 Flowflex Brass Compression Reducing Coupling 28 x 22mm, OP901.20 Opal Brass Compression Reducing Coupling 22 x 15mm, OP901.22 Opal Brass Compression Reducing Coupling 28 x 22mm, L901.16 Lamontite Brass Compression Reducing Coupling 12 x 10mm, L901.17 Lamontite Brass Compression Reducing Coupling 15 x 8mm, L901.18 Lamontite Brass Compression Reducing Coupling 15 x 10mm, L901.19 Lamontite Brass Compression Reducing Coupling 15 x 12mm, L901.20 Lamontite Brass Compression Reducing Coupling 22 x 15mm, L901.21 Lamontite Brass Compression Reducing Coupling 28 x 15mm, L901.22 Lamontite Brass Compression Reducing Coupling 28 x 22mm, P901DR.14 Flowflex DZR Brass Compression Reducing Coupling 10 x 8mm, P901DR.15 Flowflex DZR Brass Compression Reducing Coupling 12 x 8mm, P901DR.16 Flowflex DZR Brass Compression Reducing Coupling 12 x 10mm, P901DR.17 Flowflex DZR Brass Compression Reducing Coupling 15 x 8mm, P901DR.18 Flowflex DZR Brass Compression Reducing Coupling 15 x 10mm, P901DR.19 Flowflex DZR Brass Compression Reducing Coupling 15 x 12mm, P901DR.20 Flowflex DZR Brass Compression Reducing Coupling 22 x 15mm, P901DR.22 Flowflex DZR Brass Compression Reducing Coupling 28 x 22mm, L901DR.16 Lamontite DZR Brass Compression Reducing Coupling 12 x 10mm, L901DR.17 Lamontite DZR Brass Compression Reducing Coupling 15 x 8mm, L901DR.18 Lamontite DZR Brass Compression Reducing Coupling 15 x 10mm, L901DR.19 Lamontite DZR Brass Compression Reducing Coupling 15 x 12mm, L901DR.20 Lamontite DZR Brass Compression Reducing Coupling 22 x 15mm, L901DR.22 Lamontite DZR Brass Compression Reducing Coupling 28 x 22mm, P901RP.1 Flowflex Brass Compression Repair Coupling 15 x 75mm, P901RP.2 Flowflex Brass Compression Repair Coupling 15 x 100mm, P901RP.3 Flowflex Brass Compression Repair Coupling 15 x 125mm, P901RP.5 Flowflex Brass Compression Repair Coupling 22 x 100mm, OP901RP.2 Opal Brass Compression Repair Coupling 15 x 100mm, L901RP.2 Lamontite Brass Compression Repair Coupling 15 x 100mm, L901RP.5 Lamontite Brass Compression Repair Coupling 22 x 100mm, P906.05 Flowflex Brass Compression Slip Coupling 15mm, P906.08 Flowflex Brass Compression Slip Coupling 22mm, P902.03 Flowflex Brass Compression Male Adaptor 8mm x 1/8”, P902.04 Flowflex Brass Compression Male Adaptor 8mm x ¼”, P902.05 Flowflex Brass Compression Male Adaptor 8mm x 3/8”, P902.06 Flowflex Brass Compression Male Adaptor 8mm x ½”, P902.07 Flowflex Brass Compression Male Adaptor 10mm x ¼”, P902.08 Flowflex Brass Compression Male Adaptor 10mm x 3/8”, P902.09 Flowflex Brass Compression Male Adaptor 10mm x ½”, P902.10 Flowflex Brass Compression Male Adaptor 12mm x ¼”, P902.11 Flowflex Brass Compression Male Adaptor 12mm x 3/8”, P902.12 Flowflex Brass Compression Male Adaptor 12mm x ½”, P902.13 Flowflex Brass Compression Male Adaptor 15mm x ¼”, P902.14 Flowflex Brass Compression Male Adaptor 15mm x 3/8”, P902.15 Flowflex Brass Compression Male Adaptor 15mm x ½”, P902.17 Flowflex Brass Compression Male Adaptor 15mm x ¾”, P902.173 Flowflex Brass Compression Male Adaptor 15mm x 1”, P902.20 Flowflex Brass Compression Male Adaptor 22mm x ½”, P902.21 Flowflex Brass Compression Male Adaptor 22mm x ¾”, P902.22 Flowflex Brass Compression Male Adaptor 22mm x 1”, P902.224 Flowflex Brass Compression Male Adaptor 28mm x ½”, P902.221 Flowflex Brass Compression Male Adaptor 28mm x ¾”, P902.23 Flowflex Brass Compression Male Adaptor 28mm x 1”, P902.234 Flowflex Brass Compression Male Adaptor 28mm x 1 ¼”, OP902.15 Opal Brass Compression Male Adaptor 15mm x ½”, OP902.17 Opal Brass Compression Male Adaptor 15mm x ¾”, OP902.21 Opal Brass Compression Male Adaptor 22mm x ¾”, OP902.22 Opal Brass Compression Male Adaptor 22mm x 1”, OP902.23 Opal Brass Compression Male Adaptor 28mm x 1”, L902.05 Lamontite Brass Compression Male Adaptor 8mm x 3/8”, L902.06 Lamontite Brass Compression Male Adaptor 8mm x ½”, L902.08 Lamontite Brass Compression Male Adaptor 10mm x 3/8”, L902.09 Lamontite Brass Compression Male Adaptor 10mm x ½”, L902.12 Lamontite Brass Compression Male Adaptor 12mm x ½”, L902.13 Lamontite Brass Compression Male Adaptor 15mm x ¼”, L902.15 Lamontite Brass Compression Male Adaptor 15mm x ½”, L902.17 Lamontite Brass Compression Male Adaptor 15mm x ¾”, L902.20 Lamontite Brass Compression Male Adaptor 22mm x ½”, L902.21 Lamontite Brass Compression Male Adaptor 22mm x ¾”, L902.22 Lamontite Brass Compression Male Adaptor 22mm x 1”, L902.224 Lamontite Brass Compression Male Adaptor 28mm x ½”, L902.221 Lamontite Brass Compression Male Adaptor 28mm x ¾”, L902.23 Lamontite Brass Compression Male Adaptor 28mm x 1”, P902DR.08 Flowflex DZR Brass Compression Male Adaptor 10mm x 3/8”, P902DR.09 Flowflex DZR Brass Compression Male Adaptor 10mm x ½”, P902DR.11 Flowflex DZR Brass Compression Male Adaptor 12mm x 3/8”, P902DR.12 Flowflex DZR Brass Compression Male Adaptor 12mm x ½”, P902DR.14 Flowflex DZR Brass Compression Male Adaptor 15mm x 3/8”, P902DR.15 Flowflex DZR Brass Compression Male Adaptor 15mm x ½”, P902DR.17 Flowflex DZR Brass Compression Male Adaptor 15mm x ¾”, P902DR.20 Flowflex DZR Brass Compression Male Adaptor 22mm x ½”, P902DR.21 Flowflex DZR Brass Compression Male Adaptor 22mm x ¾”, P902DR.22 Flowflex DZR Brass Compression Male Adaptor 22mm x 1”, P902DR.220 Flowflex DZR Brass Compression Male Adaptor 28mm x ½”, P902DR.221 Flowflex DZR Brass Compression Male Adaptor 28mm x ¾”, P902DR.23 Flowflex DZR Brass Compression Male Adaptor 28mm x 1”, L902DR.07 Lamontite DZR Brass Compression Male Adaptor 10mm x ¼”, L902DR.08 Lamontite DZR Brass Compression Male Adaptor 10mm x 3/8”, L902DR.09 Lamontite DZR Brass Compression Male Adaptor 10mm x ½”, L902DR.11 Lamontite DZR Brass Compression Male Adaptor 12mm x 3/8”, L902DR.12 Lamontite DZR Brass Compression Male Adaptor 12mm x ½”, L902DR.13 Lamontite DZR Brass Compression Male Adaptor 15mm x ¼”, L902DR.14 Lamontite DZR Brass Compression Male Adaptor 15mm x 3/8”, L902DR.15 Lamontite DZR Brass Compression Male Adaptor 15mm x ½”, L902DR.17 Lamontite DZR Brass Compression Male Adaptor 15mm x ¾”, L902DR.20 Lamontite DZR Brass Compression Male Adaptor 22mm x ½”, L902DR.21 Lamontite DZR Brass Compression Male Adaptor 22mm x ¾”, L902DR.22 Lamontite DZR Brass Compression Male Adaptor 22mm x 1”, L902DR.221 Lamontite DZR Brass Compression Male Adaptor 28mm x ¾”, L902DR.23 Lamontite DZR Brass Compression Male Adaptor 28mm x 1”, P902T.03 Flowflex Brass Compression Male Taper Adaptor 8mm x 1/8”, P902T.04 Flowflex Brass Compression Male Taper Adaptor 8mm x ¼”, P902T.05 Flowflex Brass Compression Male Taper Adaptor 8mm x 3/8”, P902T.06 Flowflex Brass Compression Male Taper Adaptor 10mm x ¼”, P902T.07 Flowflex Brass Compression Male Taper Adaptor 10mm x 3/8”, P902T.08 Flowflex Brass Compression Male Taper Adaptor 10mm x ½”, P902T.09 Flowflex Brass Compression Male Taper Adaptor 12mm x ¼”, P902T.10 Flowflex Brass Compression Male Taper Adaptor 12mm x 3/8”, P902T.11 Flowflex Brass Compression Male Taper Adaptor 12mm x ½”, P902T.113 Flowflex Brass Compression Male Taper Adaptor 12mm x ¾”, P902T.12 Flowflex Brass Compression Male Taper Adaptor 15mm x ¼”, P902T.13 Flowflex Brass Compression Male Taper Adaptor 15mm x 3/8”, P902T.14 Flowflex Brass Compression Male Taper Adaptor 15mm x ½”, P902T.155 Flowflex Brass Compression Male Taper Adaptor 15mm x ¾”, P902T.178 Flowflex Brass Compression Male Taper Adaptor 22mm x ½”, P902T.18 Flowflex Brass Compression Male Taper Adaptor 22mm x ¾”, P902T.182 Flowflex Brass Compression Male Taper Adaptor 22mm x 1”, P902T.185 Flowflex Brass Compression Male Taper Adaptor 28mm x ¾”, P902T.19 Flowflex Brass Compression Male Taper Adaptor 28mm x 1”, OP902T.14 Opal Brass Compression Male Taper Adaptor 15mm x ½”, OP902T.18 Opal Brass Compression Male Taper Adaptor 22mm x ¾”, OP902T.19 Opal Brass Compression Male Taper Adaptor 28mm x 1”, L902T.07 Lamontite Brass Compression Male Taper Adaptor 10mm x 3/8”, L902T.10 Lamontite Brass Compression Male Taper Adaptor 12mm x 3/8”, L902T.11 Lamontite Brass Compression Male Taper Adaptor 12mm x ½”, L902T.13 Lamontite Brass Compression Male Taper Adaptor 15mm x 3/8”, L902T.14 Lamontite Brass Compression Male Taper Adaptor 15mm x ½”, L902T.178 Lamontite Brass Compression Male Taper Adaptor 22mm x ½”, L902T.18 Lamontite Brass Compression Male Taper Adaptor 22mm x ¾”, P902TDR.14 Flowflex DZR Brass Compression Male Taper Adaptor 15mm x ½”, P902TDR.155 Flowflex DZR Brass Compression Male Taper Adaptor 15mm x ¾”, P902TDR.18 Flowflex DZR Brass Compression Male Taper Adaptor 22mm x ¾”, P902TDR.182 Flowflex DZR Brass Compression Male Taper Adaptor 22mm x 1”, P902TDR.19 Flowflex DZR Brass Compression Male Taper Adaptor 28mm x 1”, L902TDR.14 Lamontite DZR Brass Compression Male Taper Adaptor 15mm x ½”, L902TDR.18 Lamontite DZR Brass Compression Male Taper Adaptor 22mm x ¾”, L902TDR.182 Lamontite DZR Brass Compression Male Taper Adaptor 22mm x 1”, P902B.1 Flowflex Brass Compression Male Adaptor Extended Thread 15mm x ½”, P902B.17 Flowflex Brass Compression Male Adaptor Extended Thread 15mm x ¾”, P902B.20 Flowflex Brass Compression Male Adaptor Extended Thread 22mm x ½”, P902B.2 Flowflex Brass Compression Male Adaptor Extended Thread 22mm x ¾”, P902B.22 Flowflex Brass Compression Male Adaptor Extended Thread 22mm x 1”, P902B.221 Flowflex Brass Compression Male Adaptor Extended Thread 28mm x ¾”, P902B.3 Flowflex Brass Compression Male Adaptor Extended Thread 28mm x 1”, OP902B.2 Opal Brass Compression Male Adaptor Extended Thread 22mm x ¾”, P902BDR.1 Flowflex DZR Brass Compression Male Adaptor Extended Thread 15mm x ½”, P902BDR.2 Flowflex DZR Brass Compression Male Adaptor Extended Thread 22mm x ¾”, P902BDR.3 Flowflex DZR Brass Compression Male Adaptor Extended Thread 28mm x 1”, P903.003 Flowflex Brass Compression Female Adaptor 8mm x 1/8”, P903.01 Flowflex Brass Compression Female Adaptor 8mm x ¼”, P903.02 Flowflex Brass Compression Female Adaptor 8mm x 3/8”, P903.03 Flowflex Brass Compression Female Adaptor 8mm x ½”, P903.04 Flowflex Brass Compression Female Adaptor 10mm x ¼”, P903.05 Flowflex Brass Compression Female Adaptor 10mm x 3/8”, P903.06 Flowflex Brass Compression Female Adaptor 10mm x ½”, P903.07 Flowflex Brass Compression Female Adaptor 12mm x ¼”, P903.08 Flowflex Brass Compression Female Adaptor 12mm x 3/8”, P903.09 Flowflex Brass Compression Female Adaptor 12mm x ½”, P903.10 Flowflex Brass Compression Female Adaptor 15mm x ¼”, P903.11 Flowflex Brass Compression Female Adaptor 15mm x 3/8”, P903.12 Flowflex Brass Compression Female Adaptor 15mm x ½”, P903.14 Flowflex Brass Compression Female Adaptor 15mm x ¾”, P903.141 Flowflex Brass Compression Female Adaptor 15mm x 1”, P903.17 Flowflex Brass Compression Female Adaptor 22mm x ½”, P903.18 Flowflex Brass Compression Female Adaptor 22mm x ¾”, P903.19 Flowflex Brass Compression Female Adaptor 22mm x 1”, P903.196 Flowflex Brass Compression Female Adaptor 28mm x ½”, P903.195 Flowflex Brass Compression Female Adaptor 28mm x ¾”, P903.20 Flowflex Brass Compression Female Adaptor 28mm x 1”, P903.201 Flowflex Brass Compression Female Adaptor 28mm x 1 ¼”, OP903.12 Opal Brass Compression Female Adaptor 15mm x ½”, OP903.14 Opal Brass Compression Female Adaptor 15mm x ¾”, OP903.17 Opal Brass Compression Female Adaptor 22mm x ½”, OP903.18 Opal Brass Compression Female Adaptor 22mm x ¾”, OP903.19 Opal Brass Compression Female Adaptor 22mm x 1”, OP903.20 Opal Brass Compression Female Adaptor 28mm x 1”, L903.02 Lamontite Brass Compression Female Adaptor 8mm x 3/8”, L903.03 Lamontite Brass Compression Female Adaptor 8mm x ½”, L903.05 Lamontite Brass Compression Female Adaptor 10mm x 3/8”, L903.06 Lamontite Brass Compression Female Adaptor 10mm x ½”, L903.08 Lamontite Brass Compression Female Adaptor 12mm x 3/8”, L903.09 Lamontite Brass Compression Female Adaptor 12mm x ½”, L903.10 Lamontite Brass Compression Female Adaptor 15mm x ¼”, L903.11 Lamontite Brass Compression Female Adaptor 15mm x 3/8” L903.12 Lamontite Brass Compression Female Adaptor 15mm x ½”, L903.14 Lamontite Brass Compression Female Adaptor 15mm x ¾”, L903.17 Lamontite Brass Compression Female Adaptor 22mm x ½”, L903.18 Lamontite Brass Compression Female Adaptor 22mm x ¾”, L903.19 Lamontite Brass Compression Female Adaptor 22mm x 1”, L903.196 Lamontite Brass Compression Female Adaptor 28mm x ½”, L903.195 Lamontite Brass Compression Female Adaptor 28mm x ¾”, L903.20 Lamontite Brass Compression Female Adaptor 28mm x 1”, P903DR.05 Flowflex DZR Brass Compression Female Adaptor 10mm x 3/8”, P903DR.06 Flowflex DZR Brass Compression Female Adaptor 10mm x ½”, P903DR.08 Flowflex DZR Brass Compression Female Adaptor 12mm x 3/8”, P903DR.09 Flowflex DZR Brass Compression Female Adaptor 12mm x ½”, P903DR.11 Flowflex DZR Brass Compression Female Adaptor 15mm x 3/8”, P903DR.12 Flowflex DZR Brass Compression Female Adaptor 15mm x ½”, P903DR.14 Flowflex DZR Brass Compression Female Adaptor 15mm x ¾”, P903DR.17 Flowflex DZR Brass Compression Female Adaptor 22mm x ½”, P903DR.18 Flowflex DZR Brass Compression Female Adaptor 22mm x ¾”, P903DR.19 Flowflex DZR Brass Compression Female Adaptor 22mm x 1”, P903DR.195 Flowflex DZR Brass Compression Female Adaptor 28mm x ¾”, P903DR.20 Flowflex DZR Brass Compression Female Adaptor 28mm x 1”, L903DR.06 Lamontite DZR Brass Compression Female Adaptor 10mm x ½", L903DR.08 Lamontite DZR Brass Compression Female Adaptor 12mm x 3/8”, L903DR.09 Lamontite DZR Brass Compression Female Adaptor 12mm x ½”, L903DR.12 Lamontite DZR Brass Compression Female Adaptor 15mm x ½”, L903DR.14 Lamontite DZR Brass Compression Female Adaptor 15mm x ¾”, L903DR.18 Lamontite DZR Brass Compression Female Adaptor 22mm x ¾”, L903DR.19 Lamontite DZR Brass Compression Female Adaptor 22mm x 1”, L903DR.20 Lamontite DZR Brass Compression Female Adaptor 28mm x 1”, P903SF.1 Flowflex Brass Compression Straight Tap Connector 15mm x ½”, P903SF.2 Flowflex Brass Compression Straight Tap Connector 15mm x ¾”, P903SF.3 Flowflex Brass Compression Straight Tap Connector 22mm x ¾”, OP903SF.1 Opal Brass Compression Straight Tap Connector 15mm x ½”, OP903SF.2 Opal Brass Compression Straight Tap Connector 15mm x ¾”, OP903SF.3 Opal Brass Compression Straight Tap Connector 22mm x ¾”, P903SFDR.1 Flowflex Brass DZR Compression Straight Tap Connector 15mm x ½”, P903SFDR.3 Flowflex Brass DZR Compression Straight Tap Connector 22mm x ¾”, L903SFDR.1 Lamontite Brass DZR Compression Straight Tap Connector 15mm x ½”, L903SFDR.3 Lamontite Brass DZR Compression Straight Tap Connector 22mm x ¾”, P921.1 Flowflex Brass Compression Tank Connector 15mm, P921.2 Flowflex Brass Compression Tank Connector 22mm, P921.3 Flowflex Brass Compression Tank Connector 28mm, OP921.1 Opal Brass Compression Tank Connector 15mm, OP921.2 Opal Brass Compression Tank Connector 22mm, OP921.3 Opal Brass Compression Tank Connector 28mm, L921.2 Lamontite Brass Compression Tank Connector 22mm, L921.3 Lamontite Brass Compression Tank Connector 28mm, P921DR.1 Flowflex DZR Brass Compression Tank Connector 15mm, P921DR.2 Flowflex DZR Brass Compression Tank Connector 22mm, P921DR.3 Flowflex DZR Brass Compression Tank Connector 28mm, L921DR.1 Lamontite DZR Brass Compression Tank Connector 15mm, L921DR.2 Lamontite DZR Brass Compression Tank Connector 22mm, L921DR.3 Lamontite DZR Brass Compression Tank Connector 28mm, P903ST.1 Flowflex Brass Compression Female Adaptor Short Thread 15mm x ½”, P903ST.2 Flowflex Brass Compression Female Adaptor Short Thread 15mm x ¾”, P903ST.3 Flowflex Brass Compression Female Adaptor Short Thread 22mm x ¾”, J17DR.15 Flowflex DZR Brass Compression One Piece Reducer 10 x 8mm, J17DR.155 Flowflex DZR Brass Compression One Piece Reducer 12 x 8mm, J17DR.16 Flowflex DZR Brass Compression One Piece Reducer 12 x 10mm, J17DR.165 Flowflex DZR Brass Compression One Piece Reducer 15 x 8mm, J17DR.17 Flowflex DZR Brass Compression One Piece Reducer 15 x 10mm, J17DR.18 Flowflex DZR Brass Compression One Piece Reducer 15 x 12mm, J17DR.209 Flowflex DZR Brass Compression One Piece Reducer 22 x 12mm, J17DR.21 Flowflex DZR Brass Compression One Piece Reducer 22 x 15mm, J17DR.27 Flowflex DZR Brass Compression One Piece Reducer 28 x 12mm, J17DR.28 Flowflex DZR Brass Compression One Piece Reducer 28 x 15mm, J17DR.29 Flowflex DZR Brass Compression One Piece Reducer 28 x 22mm, P168DR.005 Flowflex DZR Brass Compression Three Piece Reducing Set 10 x 8mm, P168DR.003 Flowflex DZR Brass Compression Three Piece Reducing Set 12 x 8mm, P168DR.006 Flowflex DZR Brass Compression Three Piece Reducing Set 12 x 10mm, P168DR.01 Flowflex DZR Brass Compression Three Piece Reducing Set 15 x 8mm, P168DR.02 Flowflex DZR Brass Compression Three Piece Reducing Set 15 x 10mm, P168DR.03 Flowflex DZR Brass Compression Three Piece Reducing Set 15 x 12mm, P168DR.004 Flowflex DZR Brass Compression Three Piece Reducing Set 22 x 12mm, P168DR.04 Flowflex DZR Brass Compression Three Piece Reducing Set 22 x 15mm, P168DR.05 Flowflex DZR Brass Compression Three Piece Reducing Set 28 x 15mm, P168DR.06 Flowflex DZR Brass Compression Three Piece Reducing Set 28 x 22mm, P168DR.064 Flowflex DZR Brass Compression Three Piece Reducing Set 35 x 15mm, P168DR.065 Flowflex DZR Brass Compression Three Piece Reducing Set 35 x 22mm, P168DR.07 Flowflex DZR Brass Compression Three Piece Reducing Set 35 x 28mm, P168DR.075 Flowflex DZR Brass Compression Three Piece Reducing Set 42 x 15mm, P168DR.076 Flowflex DZR Brass Compression Three Piece Reducing Set 42 x 22mm, P168DR.08 Flowflex DZR Brass Compression Three Piece Reducing Set 42 x 28mm, P168DR.010 Flowflex DZR Brass Compression Three Piece Reducing Set 54 x 15mm, P168DR.110 Flowflex DZR Brass Compression Three Piece Reducing Set 54 x 22mm, P168DR.1101 Flowflex DZR Brass Compression Three Piece Reducing Set 54 x 28mm, P923.1 Flowflex Brass Compression Stop End 8mm, P923.2 Flowflex Brass Compression Stop End 10mm, P923.3 Flowflex Brass Compression Stop End 12mm, P923.4 Flowflex Brass Compression Stop End 15mm, P923.5 Flowflex Brass Compression Stop End 22mm, P923.7 Flowflex Brass Compression Stop End 28mm, OP923.4 Opal Brass Compression Stop End 15mm, OP923.5 Opal Brass Compression Stop End 22mm, OP923.6 Opal Brass Compression Stop End 28mm, L923.3 Lamontite Brass Compression Stop End 12mm, L923.4 Lamontite Brass Compression Stop End 15mm, L923.5 Lamontite Brass Compression Stop End 22mm, L923.6 Lamontite Brass Compression Stop End 28mm, P923DR.1 Flowflex DZR Brass Compression Stop End 8mm, P923DR.2 Flowflex DZR Brass Compression Stop End 10mm, P923DR.3 Flowflex DZR Brass Compression Stop End 12mm, P923DR.4 Flowflex DZR Brass Compression Stop End 15mm, P923DR.5 Flowflex DZR Brass Compression Stop End 22mm, P923DR.6 Flowflex DZR Brass Compression Stop End 28mm, P923DR.7 Flowflex DZR Brass Compression Stop End 35mm, P923DR.8 Flowflex DZR Brass Compression Stop End 42mm, P923DR.9 Flowflex DZR Brass Compression Stop End 54mm, L923DR.1 Lamontite DZR Brass Compression Stop End 8mm, L923DR.2 Lamontite DZR Brass Compression Stop End 10mm, L923DR.3 Lamontite DZR Brass Compression Stop End 12mm, L923DR.4 Lamontite DZR Brass Compression Stop End 15mm, L923DR.5 Lamontite DZR Brass Compression Stop End 22mm, P801.02 Flowflex Brass Compression Equal Elbow 8mm, P801.03 Flowflex Brass Compression Equal Elbow 10mm, P801.04 Flowflex Brass Compression Equal Elbow 12mm P801.05 Flowflex Brass Compression Equal Elbow 15mm, P801.08 Flowflex Brass Compression Equal Elbow 22mm, P801.09 Flowflex Brass Compression Equal Elbow 28mm, OP801.05 Opal Brass Compression Equal Elbow 15mm, OP801.08 Opal Brass Compression Equal Elbow 22mm, OP801.09 Opal Brass Compression Equal Elbow 28mm, L801.02 Lamontite Brass Compression Equal Elbow 8mm, L801.03 Lamontite Brass Compression Equal Elbow 10mm, L801.04 Lamontite Brass Compression Equal Elbow 12mm, L801.05 Lamontite Brass Compression Equal Elbow 15mm, L801.08 Lamontite Brass Compression Equal Elbow 22mm, L801.09 Lamontite Brass Compression Equal Elbow 28mm, P801DR.02 Flowflex DZR Brass Compression Equal Elbow 8mm, P801DR.03 Flowflex DZR Brass Compression Equal Elbow 10mm, P801DR.04 Flowflex DZR Brass Compression Equal Elbow 12mm, P801DR.05 Flowflex DZR Brass Compression Equal Elbow 15mm, P801DR.08 Flowflex DZR Brass Compression Equal Elbow 22mm, P801DR.09 Flowflex DZR Brass Compression Equal Elbow 28mm, L801DR.02 Lamontite DZR Brass Compression Equal Elbow 8mm, L801DR.03 Lamontite DZR Brass Compression Equal Elbow 10mm, L801DR.04 Lamontite DZR Brass Compression Equal Elbow 12mm, L801DR.05 Lamontite DZR Brass Compression Equal Elbow 15mm, L801DR.08 Lamontite DZR Brass Compression Equal Elbow 22mm, L801DR.09 Lamontite DZR Brass Compression Equal Elbow 28mm, P801.035 Flowflex Brass Compression Reducing Elbow 12 x 10mm, P801.036 Flowflex Brass Compression Reducing Elbow 15 x 10mm, P801.055 Flowflex Brass Compression Reducing Elbow 15 x 12mm, P801.085 Flowflex Brass Compression Reducing Elbow 22 x 15mm, P801.092 Flowflex Brass Compression Reducing Elbow 28 x 15mm, P801.098 Flowflex Brass Compression Reducing Elbow 28 x 22mm, L801.035 Lamontite Brass Compression Reducing Elbow 12 x 10mm, L801.036 Lamontite Brass Compression Reducing Elbow 15 x 10mm, L801.055 Lamontite Brass Compression Reducing Elbow 15 x 12mm, L801.085 Lamontite Brass Compression Reducing Elbow 22 x 15mm, L801.092 Lamontite Brass Compression Reducing Elbow 28 x 15mm, L801.098 Lamontite Brass Compression Reducing Elbow 28 x 22mm, P801DR.085 Flowflex DZR Brass Compression Reducing Elbow 22 x 15mm, P802.01 Flowflex Brass Compression Male Elbow 8mm x ¼”, P802.02 Flowflex Brass Compression Male Elbow 10mm x ¼”, P802.03 Flowflex Brass Compression Male Elbow 10mm x 3/8”, P802.031 Flowflex Brass Compression Male Elbow 10mm x ½”, P802.04 Flowflex Brass Compression Male Elbow 12mm x ¼”, P802.05 Flowflex Brass Compression Male Elbow 12mm x 3/8”, P802.051 Flowflex Brass Compression Male Elbow 12mm x ½”, P802.07 Flowflex Brass Compression Male Elbow 15mm x 3/8”, P802.08 Flowflex Brass Compression Male Elbow 15mm x ½”, P802.09 Flowflex Brass Compression Male Elbow 15mm x ¾”, P802.11 Flowflex Brass Compression Male Elbow 22mm x ½”, P802.12 Flowflex Brass Compression Male Elbow 22mm x ¾”, P802.13 Flowflex Brass Compression Male Elbow 22mm x 1”, P802.141 Flowflex Brass Compression Male Elbow 28mm x ¾”, P802.14 Flowflex Brass Compression Male Elbow 28mm x 1”, OP802.08 Opal Brass Compression Male Elbow 15mm x ½”, OP802.12 Opal Brass Compression Male Elbow 22mm x ¾”, OP802.13 Opal Brass Compression Male Elbow 22mm x 1”, OP802.141 Opal Brass Compression Male Elbow 28mm x ¾”, OP802.14 Opal Brass Compression Male Elbow 28mm x 1”, L802.07 Lamontite Brass Compression Male Elbow 15mm x 3/8”, L802.08 Lamontite Brass Compression Male Elbow 15mm x ½”, L802.09 Lamontite Brass Compression Male Elbow 15mm x ¾”, L802.11 Lamontite Brass Compression Male Elbow 22mm x ½”, L802.12 Lamontite Brass Compression Male Elbow 22mm x ¾”, L802.13 Lamontite Brass Compression Male Elbow 22mm x 1”, L802.141 Lamontite Brass Compression Male Elbow 28mm x ¾”, L802.14 Lamontite Brass Compression Male Elbow 28mm x 1”, P802DR.01 Flowflex DZR Brass Compression Male Elbow 8mm x ¼”, P802DR.015 Flowflex DZR Brass Compression Male Elbow 8mm x 3/8”, P802DR.03 Flowflex DZR Brass Compression Male Elbow 10mm x 3/8”, P802DR.031 Flowflex DZR Brass Compression Male Elbow 10mm x ½”, P802DR.05 Flowflex DZR Brass Compression Male Elbow 12mm x 3/8”, P802DR.051 Flowflex DZR Brass Compression Male Elbow 12mm x ½”, P802DR.07 Flowflex DZR Brass Compression Male Elbow 15mm x 3/8”, P802DR.08 Flowflex DZR Brass Compression Male Elbow 15mm x ½”, P802DR.09 Flowflex DZR Brass Compression Male Elbow 15mm x ¾”, P802DR.11 Flowflex DZR Brass Compression Male Elbow 22mm x ½”, P802DR.12 Flowflex DZR Brass Compression Male Elbow 22mm x ¾”, P802DR.13 Flowflex DZR Brass Compression Male Elbow 22mm x 1”, P802DR.14 Flowflex DZR Brass Compression Male Elbow 28mm x 1”, L802DR.05 Lamontite DZR Brass Compression Male Elbow 12mm x 3/8”, L802DR.051 Lamontite DZR Brass Compression Male Elbow 12mm x ½”, L802DR.07 Lamontite DZR Brass Compression Male Elbow 15mm x 3/8”, L802DR.08 Lamontite DZR Brass Compression Male Elbow 15mm x ½”, L802DR.09 Lamontite DZR Brass Compression Male Elbow 15mm x ¾”, L802DR.12 Lamontite DZR Brass Compression Male Elbow 22mm x ¾”, L802DR.13 Lamontite DZR Brass Compression Male Elbow 22mm x 1”, L802DR.14 Lamontite DZR Brass Compression Male Elbow 28mm x 1”, P802T.04 Flowflex Brass Compression Male Taper Elbow 8mm x ¼”, P802T.045 Flowflex Brass Compression Male Taper Elbow 8mm x 3/8”, P802T.05 Flowflex Brass Compression Male Taper Elbow 10mm x ¼”, P802T.06 Flowflex Brass Compression Male Taper Elbow 10mm x 3/8”, P802T.07 Flowflex Brass Compression Male Taper Elbow 10mm x ½”, P802T.08 Flowflex Brass Compression Male Taper Elbow 12mm x ¼”, P802T.09 Flowflex Brass Compression Male Taper Elbow 12mm x 3/8”, P802T.10 Flowflex Brass Compression Male Taper Elbow 12mm x ½”, P802T.12 Flowflex Brass Compression Male Taper Elbow 15mm x 3/8”, P802T.13 Flowflex Brass Compression Male Taper Elbow 15mm x ½”, P802T.131 Flowflex Brass Compression Male Taper Elbow 15mm x ¾”, P802T.139 Flowflex Brass Compression Male Taper Elbow 22mm x ½”, P802T.14 Flowflex Brass Compression Male Taper Elbow 22mm x ¾”, P802T.15 Flowflex Brass Compression Male Taper Elbow 22mm x 1”, P802T.159 Flowflex Brass Compression Male Taper Elbow 28mm x ¾”, P802T.16 Flowflex Brass Compression Male Taper Elbow 28mm x 1”, OP802T.13 Opal Brass Compression Male Taper Elbow 15mm x ½”, OP802T.14 Opal Brass Compression Male Taper Elbow 22mm x ¾”, L802T.06 Lamontite Brass Compression Male Taper Elbow 10mm x 3/8”, L802T.09 Lamontite Brass Compression Male Taper Elbow 12mm x 3/8”, L802T.10 Lamontite Brass Compression Male Taper Elbow 12mm x ½”, L802T.12 Lamontite Brass Compression Male Taper Elbow 15mm x 3/8”, L802T.13 Lamontite Brass Compression Male Taper Elbow 15mm x ½”, L802T.14 Lamontite Brass Compression Male Taper Elbow 22mm x ¾”, P802TDR.06 Flowflex DZR Brass Compression Male Taper Elbow 10mm x 3/8”, P802TDR.07 Flowflex DZR Brass Compression Male Taper Elbow 10mm x ½”, P802TDR.05 Flowflex DZR Brass Compression Male Taper Elbow 12mm x 3/8”, P802TDR.10 Flowflex DZR Brass Compression Male Taper Elbow 12mm x ½”, P802TDR.12 Flowflex DZR Brass Compression Male Taper Elbow 15mm x 3/8”, P802TDR.13 Flowflex DZR Brass Compression Male Taper Elbow 15mm x ½”, P802TDR.131 Flowflex DZR Brass Compression Male Taper Elbow 15mm x ¾”, P802TDR.14 Flowflex DZR Brass Compression Male Taper Elbow 22mm x ¾”, P802TDR.15 Flowflex DZR Brass Compression Male Taper Elbow 22mm x 1”, P802TDR.16 Flowflex DZR Brass Compression Male Taper Elbow 28mm x 1”, L802TDR.13 Lamontite DZR Brass Compression Male Taper Elbow 15mm x ½”, P803.01 Flowflex Brass Compression Female Elbow 8mm x ¼”, P803.012 Flowflex Brass Compression Female Elbow 8mm x ½”, P803.02 Flowflex Brass Compression Female Elbow 10mm x ¼”, P803.03 Flowflex Brass Compression Female Elbow 10mm x 3/8”, P803.031 Flowflex Brass Compression Female Elbow 10mm x ½”, P803.04 Flowflex Brass Compression Female Elbow 12mm x ¼”, P803.05 Flowflex Brass Compression Female Elbow 12mm x 3/8”, P803.051 Flowflex Brass Compression Female Elbow 12mm x ½”, P803.055 Flowflex Brass Compression Female Elbow 15mm x 3/8”, P803.06 Flowflex Brass Compression Female Elbow 15mm x ½”, P803.063 Flowflex Brass Compression Female Elbow 15mm x ¾”, P803.068 Flowflex Brass Compression Female Elbow 22mm x ½”, P803.07 Flowflex Brass Compression Female Elbow 22mm x ¾”, P803.08 Flowflex Brass Compression Female Elbow 22mm x 1”, P803.009 Flowflex Brass Compression Female Elbow 28mm x ½”, P803.085 Flowflex Brass Compression Female Elbow 28mm x ¾”, P803.09 Flowflex Brass Compression Female Elbow 28mm x 1”, P803.11 Flowflex Brass Compression Female Elbow 42mm x 1 ½”, OP803.06 Opal Brass Compression Female Elbow 15mm x ½”, OP803.07 Opal Brass Compression Female Elbow 22mm x ¾”, OP803.08 Opal Brass Compression Female Elbow 22mm x 1”, OP803.09 Opal Brass Compression Female Elbow 28mm x 1”, L803.03 Lamontite Brass Compression Female Elbow 10mm x 3/8”, L803.031 Lamontite Brass Compression Female Elbow 10mm x ½”, L803.05 Lamontite Brass Compression Female Elbow 12mm x 3/8”, L803.051 Lamontite Brass Compression Female Elbow 12mm x ½”, L803.055 Lamontite Brass Compression Female Elbow 15mm x 3/8”, L803.06 Lamontite Brass Compression Female Elbow 15mm x ½”, L803.063 Lamontite Brass Compression Female Elbow 15mm x ¾”, L803.068 Lamontite Brass Compression Female Elbow 22mm x ½”, L803.07 Lamontite Brass Compression Female Elbow 22mm x ¾”, L803.08 Lamontite Brass Compression Female Elbow 22mm x 1”, L803.009 Lamontite Brass Compression Female Elbow 28mm x ½”, L803.085 Lamontite Brass Compression Female Elbow 28mm x ¾”, L803.09 Lamontite Brass Compression Female Elbow 28mm x 1”, P803DR.03 Flowflex DZR Brass Compression Female Elbow 10mm x 3/8”, P803DR.031 Flowflex DZR Brass Compression Female Elbow 10mm x ½”, P803DR.05 Flowflex DZR Brass Compression Female Elbow 12mm x 3/8”, P803DR.051 Flowflex DZR Brass Compression Female Elbow 12mm x ½”, P803DR.055 Flowflex DZR Brass Compression Female Elbow 15mm x 3/8”, P803DR.06 Flowflex DZR Brass Compression Female Elbow 15mm x ½”, P803DR.063 Flowflex DZR Brass Compression Female Elbow 15mm x ¾”, P803DR.068 Flowflex DZR Brass Compression Female Elbow 22mm x ½”, P803DR.07 Flowflex DZR Brass Compression Female Elbow 22mm x ¾”, P803DR.08 Flowflex DZR Brass Compression Female Elbow 22mm x 1”, P803DR.09 Flowflex DZR Brass Compression Female Elbow 28mm x 1”, L803DR.051 Lamontite DZR Brass Compression Female Elbow 12mm x ½”, L803DR.055 Lamontite DZR Brass Compression Female Elbow 15mm x 3/8” L803DR.06 Lamontite DZR Brass Compression Female Elbow 15mm x ½”, L803DR.063 Lamontite DZR Brass Compression Female Elbow 15mm x ¾”, L803DR.07 Lamontite DZR Brass Compression Female Elbow 22mm x ¾”, L803DR.08 Lamontite DZR Brass Compression Female Elbow 22mm x 1”, L803DR.09 Lamontite DZR Brass Compression Female Elbow 28mm x 1”, P803WP.04 Flowflex Brass Compression Wallplate Elbow 10mm x ½”, P803WP.05 Flowflex Brass Compression Wallplate Elbow 12mm x ½”, P803WP.2 Flowflex Brass Compression Wallplate Elbow 15mm x ½”, P803WP.231 Flowflex Brass Compression Wallplate Elbow 15mm x ¾” P803WP.4 Flowflex Brass Compression Wallplate Elbow 22mm x ½”, P803WP.5 Flowflex Brass Compression Wallplate Elbow 22mm x ¾”, OP803WP.2 Opal Brass Compression Wallplate Elbow 15mm x ½”, OP803WP.5 Opal Brass Compression Wallplate Elbow 22mm x ¾”, L803WP.05 Lamontite Brass Compression Wallplate Elbow 12mm x ½”, L803WP.2 Lamontite Brass Compression Wallplate Elbow 15mm x ½”, L803WP.4 Lamontite Brass Compression Wallplate Elbow 22mm x ½”, L803WP.5 Lamontite Brass Compression Wallplate Elbow 22mm x ¾”, P803WPDR.04 Flowflex DZR Brass Compression Wallplate Elbow 10mm x ½”, P803WPDR.045 Flowflex DZR Brass Compression Wallplate Elbow 12mm x 3/8”, P803WPDR.05 Flowflex DZR Brass Compression Wallplate Elbow 12mm x ½”, P803WPDR.2 Flowflex DZR Brass Compression Wallplate Elbow 15mm x ½”, P803WPDR.4 Flowflex DZR Brass Compression Wallplate Elbow 22mm x ½”, P803WPDR.5 Flowflex DZR Brass Compression Wallplate Elbow 22mm x ¾”, L803WPDR.2 Lamontite DZR Brass Compression Wallplate Elbow 15mm x ½”, L803WPDR.5 Lamontite DZR Brass Compression Wallplate Elbow 22mm x ¾”, P803SF.1 Flowflex Brass Compression Bent Tap Connector 15mm x ½”, P803SF.2 Flowflex Brass Compression Bent Tap Connector 22mm x ¾”, OP803SF.1 Opal Brass Compression Bent Tap Connector 15mm x ½”, OP803SF.2 Opal Brass Compression Bent Tap Connector 22mm x ¾”, P803SFDR.1 Flowflex DZR Brass Compression Bent Tap Connector 15mm x ½”, P803SFDR.2 Flowflex Brass Compression Bent Tap Connector 22mm x ¾”, L803SFDR.1 Lamontite DZR Brass Compression Bent Tap Connector 15mm x ½”, P701.02 Flowflex Brass Compression Equal Tee 8mm, P701.03 Flowflex Brass Compression Equal Tee 10mm, P701.04 Flowflex Brass Compression Equal Tee 12mm, P701.05 Flowflex Brass Compression Equal Tee 15mm, P701.08 Flowflex Brass Compression Equal Tee 22mm, P701.09 Flowflex Brass Compression Equal Tee 28mm OP701.05 Opal Brass Compression Equal Tee 15mm, OP701.08 Opal Brass Compression Equal Tee 22mm, OP701.09 Opal Brass Compression Equal Tee 28mm, L701.02 Lamontite Brass Compression Equal Tee 8mm, L701.03 Lamontite Brass Compression Equal Tee 10mm, L701.04 Lamontite Brass Compression Equal Tee 12mm, L701.05 Lamontite Brass Compression Equal Tee 15mm, L701.08 Lamontite Brass Compression Equal Tee 22mm, L701.09 Lamontite Brass Compression Equal Tee 28mm, P701DR.02 Flowflex DZR Brass Compression Equal Tee 8mm, P701DR.03 Flowflex DZR Brass Compression Equal Tee 10mm, P701DR.04 Flowflex DZR Brass Compression Equal Tee 12mm, P701DR.05 Flowflex DZR Brass Compression Equal Tee 15mm, P701DR.08 Flowflex DZR Brass Compression Equal Tee 22mm, P701DR.09 Flowflex DZR Brass Compression Equal Tee 28mm, L701DR.03 Lamontite DZR Brass Compression Equal Tee 10mm, L701DR.04 Lamontite DZR Brass Compression Equal Tee 12mm, L701DR.05 Lamontite DZR Brass Compression Equal Tee 15mm, L701DR.08 Lamontite DZR Brass Compression Equal Tee 22mm, L701DR.09 Lamontite DZR Brass Compression Equal Tee 28mm, P702.0121 Flowflex Brass Compression Reduced Branch Tee 12 x 12 x 10mm, P702.116 Flowflex Brass Compression Reduced Branch Tee 15 x 15 x 10mm, P702.125 Flowflex Brass Compression Reduced Branch Tee 15 x 15 x 12mm, P702.161 Flowflex Brass Compression Reduced Branch Tee 22 x 22 x 12mm, P702.16 Flowflex Brass Compression Reduced Branch Tee 22 x 22 x 15mm, P702.19 Flowflex Brass Compression Reduced Branch Tee 28 x 28 x 15mm, P702.20 Flowflex Brass Compression Reduced Branch Tee 28 x 28 x 22mm, OP702.16 Opal Brass Compression Reduced Branch Tee 22 x 22 x 15mm, OP702.19 Opal Brass Compression Reduced Branch Tee 28 x 28 x 15mm, OP702.20 Opal Brass Compression Reduced Branch Tee 28 x 28 x 22mm, L702.125 Lamontite Brass Compression Reduced Branch Tee 15 x 15 x 12mm, L702.16 Lamontite Brass Compression Reduced Branch Tee 22 x 22 x 15mm, L702.19 Lamontite Brass Compression Reduced Branch Tee 28 x 28 x 15mm, L702.20 Lamontite Brass Compression Reduced Branch Tee 28 x 28 x 22mm, P702DR.0121 Flowflex Brass Compression Reduced Branch Tee 12 x 12 x 10mm, P702DR.116 Flowflex Brass Compression Reduced Branch Tee 15 x 15 x 10mm, P702DR.125 Flowflex Brass Compression Reduced Branch Tee 15 x 15 x 12mm, P702DR.161 Flowflex Brass Compression Reduced Branch Tee 22 x 22 x 12mm, P702DR.16 Flowflex Brass Compression Reduced Branch Tee 22 x 22 x 15mm, P702DR.19 Flowflex Brass Compression Reduced Branch Tee 28 x 28 x 15mm, P702DR.20 Flowflex Brass Compression Reduced Branch Tee 28 x 28 x 22mm, L702DR.125 Lamontite Brass Compression Reduced Branch Tee 15 x 15 x 12mm, L702DR.16 Lamontite Brass Compression Reduced Branch Tee 22 x 22 x 15mm, L702DR.19 Lamontite Brass Compression Reduced Branch Tee 28 x 28 x 15mm, L702DR.20 Lamontite Brass Compression Reduced Branch Tee 28 x 28 x 22mm, P703.124 Flowflex Brass Compression Reduced End Tee 15 x 12 x 15mm, P703.15 Flowflex Brass Compression Reduced End Tee 22 x 15 x 22mm, P703.17 Flowflex Brass Compression Reduced End Tee 28 x 15 x 28mm, P703.18 Flowflex Brass Compression Reduced End Tee 28 x 22 x 28mm, OP703.15 Opal Brass Compression Reduced End Tee 22 x 15 x 22mm, L703.15 Lamontite Brass Compression Reduced End Tee 22 x 15 x 22mm, L703.17 Lamontite Brass Compression Reduced End Tee 28 x 15 x 28mm, L703.18 Lamontite Brass Compression Reduced End Tee 28 x 22 x 28mm, P703DR.0120 Flowflex DZR Brass Compression Reduced End Tee 12 x 10 x 12mm, P703DR.123 Flowflex DZR Brass Compression Reduced End Tee 15 x 10 x 15mm, P703DR.124 Flowflex DZR Brass Compression Reduced End Tee 15 x 12 x 15mm, P703DR.137 Flowflex DZR Brass Compression Reduced End Tee 22 x 12 x 22mm, P703DR.15 Flowflex DZR Brass Compression Reduced End Tee 22 x 15 x 22mm, P703DR.17 Flowflex DZR Brass Compression Reduced End Tee 28 x 15 x 28mm, P703DR.18 Flowflex DZR Brass Compression Reduced End Tee 28 x 22 x 28mm, L703DR.124 Lamontite DZR Brass Compression Reduced End Tee 15 x 12 x 15mm, L703DR.15 Lamontite DZR Brass Compression Reduced End Tee 22 x 15 x 22mm, P704.121 Flowflex Brass Compression Reduced Branch and End Tee 15 x 12 x 12mm, P704.14 Flowflex Brass Compression Reduced Branch and End Tee 22 x 15 x 15mm, P704.168 Flowflex Brass Compression Reduced Branch and End Tee 28 x 15 x 15mm, P704.171 Flowflex Brass Compression Reduced Branch and End Tee 28 x 22 x 22mm, OP704.14 Opal Brass Compression Reduced Branch and End Tee 22 x 15 x 15mm, L704.121 Lamontite Brass Compression Reduced Branch and End Tee 15 x 12 x 12mm, L704.14 Lamontite Brass Compression Reduced Branch and End Tee 22 x 15 x 15mm, L704.168 Lamontite Brass Compression Reduced Branch and End Tee 28 x 15 x 15mm, L704.171 Lamontite Brass Compression Reduced Branch and End Tee 28 x 22 x 22mm, L704.2254 Lamontite Brass Compression Reduced Branch and End Tee 42 x 35 x 35mm, P704DR.120 Flowflex DZR Brass Compression Reduced Branch and End Tee 12 x 10 x 10mm, P704DR.1201 Flowflex DZR Brass Compression Reduced Branch and End Tee 15 x 10 x 10mm, P704DR.121 Flowflex DZR Brass Compression Reduced Branch and End Tee 15 x 12 x 12mm, P704DR.14 Flowflex DZR Brass Compression Reduced Branch and End Tee 22 x 15 x 15mm, P704DR.168 Flowflex DZR Brass Compression Reduced Branch and End Tee 28 x 15 x 15mm, P704DR.171 Flowflex DZR Brass Compression Reduced Branch and End Tee 28 x 22 x 22mm, L704DR.121 Lamontite DZR Brass Compression Reduced Branch and End Tee 15 x 12 x 12mm, L704DR.14 Lamontite DZR Brass Compression Reduced Branch and End Tee 22 x 15 x 15mm, P705.123 Flowflex Brass Compression Reduced Both Ends Tee 12 x 12 x 15mm, P705.13 Flowflex Brass Compression Reduced Both Ends Tee 15 x 15 x 22mm, P705.165 Flowflex Brass Compression Reduced Both Ends Tee 22 x 22 x 28mm, L705.123 Lamontite Brass Compression Reduced Both Ends Tee 12 x 12 x 15mm, L705.13 Lamontite Brass Compression Reduced Both Ends Tee 15 x 15 x 22mm, L705.165 Lamontite Brass Compression Reduced Both Ends Tee 22 x 22 x 28mm, P705DR.123 Flowflex Brass Compression Reduced Both Ends Tee 12 x 12 x 15mm, P705DR.13 Flowflex Brass Compression Reduced Both Ends Tee 15 x 15 x 22mm, P717.04 Flowflex Brass Compression Female Branch Tee 10 x 10mm x ½”, P717.03 Flowflex Brass Compression Female Branch Tee 12 x 12mm x 3/8”, P717.06 Flowflex Brass Compression Female Branch Tee 12 x 12mm x ½”, P717.1 Flowflex Brass Compression Female Branch Tee 15 x 15mm x ½”, P717.14 Flowflex Brass Compression Female Branch Tee 15 x 15mm x ¾”, P717.19 Flowflex Brass Compression Female Branch Tee 22 x 22mm x 3/8”, P717.2 Flowflex Brass Compression Female Branch Tee 22 x 22mm x ½”, P717.3 Flowflex Brass Compression Female Branch Tee 22 x 22mm x ¾”, P717.35 Flowflex Brass Compression Female Branch Tee 22 x 22mm x 1”, P717.5 Flowflex Brass Compression Female Branch Tee 28 x 28mm x ½”, P717.6 Flowflex Brass Compression Female Branch Tee 28 x 28mm x ¾”, P717.4 Flowflex Brass Compression Female Branch Tee 28 x 28mm x 1”, L717.1 Lamontite Brass Compression Female Branch Tee 15 x 15mm x ½”, L717.2 Lamontite Brass Compression Female Branch Tee 22 x 22mm x ½”, L717.3 Lamontite Brass Compression Female Branch Tee 22 x 22mm x ¾”, L717.5 Lamontite Brass Compression Female Branch Tee 28 x 28mm x ½”, L717.6 Lamontite Brass Compression Female Branch Tee 28 x 28mm x ¾”, L717.4 Lamontite Brass Compression Female Branch Tee 28 x 28mm x 1”, P717DR.03 Flowflex DZR Brass Compression Female Branch Tee 12 x 12mm x 3/8”, P717DR.06 Flowflex DZR Brass Compression Female Branch Tee 12 x 12mm x ½”, P717DR.08 Flowflex DZR Brass Compression Female Branch Tee 15 x 15mm x 3/8”, P717DR.1 Flowflex DZR Brass Compression Female Branch Tee 15 x 15mm x ½”, P717DR.2 Flowflex DZR Brass Compression Female Branch Tee 22 x 22mm x ½”, P717DR.3 Flowflex DZR Brass Compression Female Branch Tee 22 x 22mm x ¾”, L717DR.1 Lamontite DZR Brass Compression Female Branch Tee 15 x 15mm x ½”, L717DR.3 Lamontite DZR Brass Compression Female Branch Tee 22 x 22mm x ¾”, P737.1 Flowflex Brass Compression Female End Tee 15 x ½” x 15mm, P737.15 Flowflex Brass Compression Female End Tee 15 x ¾” x 15mm, P737.2 Flowflex Brass Compression Female End Tee 22 x ½” x 22mm, P737.3 Flowflex Brass Compression Female End Tee 22 x ¾” x 22mm, P737.4 Flowflex Brass Compression Female End Tee 28 x ½” x 28mm, L737.1 Lamontite Brass Compression Female End Tee 15 x ½” x 15mm, P737DR.1 Flowflex DZR Brass Compression Female End Tee 15 x ½” x 15mm, P737DR.4 Flowflex DZR Brass Compression Female End Tee 28 x ½” x 28mm, P707.1 Flowflex Brass Compression Crossover 15mm, P707.2 Flowflex Brass Compression Crossover 22mm, P707.3 Flowflex Brass Compression Crossover 28mm, L707.01 Lamontite Brass Compression Crossover 15mm, L707.02 Lamontite Brass Compression Crossover 22mm, L707.03 Lamontite Brass Compression Crossover 28mm.

Approval Holder:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

Manufacturer:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

Dual flush drop valve incorporating two push buttons that operate either full or reduced flush. The valve reduced flush assembly is adjustable to give different flush volumes. The valve incorporates an internal overflow (overflow can be fitted or blanked off). Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2210903

Size:

2” BSP Outlet

Marking:

Niagara, Dudley and TD moulded on top of valve.

Installation Requirements:

R001 R571 R581

Expiry date:

31/10/2027

Model:

DUDLEY NIAGARA MECHANICAL DUAL FLUSH VALVE - product code PSPOVN313348.

Product Images

Approval Holder:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Manufacturer:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Turbo 88R Duo lush syphonic flushing apparatus with polypropylene body and stainless-steel link for use with WC flushing cisterns.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2210904

Size:

1½” outlet, Syphon heights 7” to 12”.

Marking:

DUDLEY TURBO 88R, and TD logo on body

Installation Requirements:

R001 R571 R581

Expiry date:

31/10/2027

Model:

TURBO 88R DUO FLUSH SYPHON - product code PSPSY8XXXXXX (where 'XXXXXX' denotes the syphon build specification such as height, C link length, outlet tail length etc).

Product Images

Approval Holder:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Manufacturer:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Alfa Laval range of copper brazed and stainless-steel fusion bonded, stainless steel heat exchangers in various sizes ranging from 4 plates to 300 plates. Maximum working pressures and temperatures: CB10, CB11, CB15, CB16, CB16AQ, CB18, CB18AQ & CB18DW: S1/S2 circuit: 5 Bar. S3/S4 circuit 10 Bar. Max working temperature 150°C. CB20 & CB20AQ: S1/S2 circuit: 16 Bar. S3/S4 circuit 16 Bar. Max working temperature 225°C. CB65, CB65AQ & CBH65: S1/S2 circuit: 18 Bar. S3/S4 circuit 37 Bar. Max working temperature 225°C. CBH16 & CBH18: S1/S2 circuit: 32 Bar. S3/S4 circuit 32 Bar. Max working temperature 150°C. Maximum operating temperatures detailed above are for primary circuits only, secondary circuits approved to 99oC. Models added March 2023: CBH30: 50 Bar (S1/S2/S3/S4) & 225.0°C, CBH112: 45 Bar (S1/S2) 51 Bar (S3/S4) & 225.0°C, CB30: 41 Bar (S1/S2/S3/S4) & 225.0°C, CB60: 40 Bar (S1/S2/S3/S4) & 225.0°C, CB60AQ: 40 Bar (S1/S2/S3/S4) & 225.0°C, CBH60: 40 Bar (S1/S2/S3/S4) & 225.0°C, CB62: 40 Bar (S1/S2/S3/S4) & 225.0°C, CB62AQ: 40 Bar (S1/S2/S3/S4) & 225.0°C, CBH62: 40 Bar (S1/S2/S3/S4) & 225.0°C, CB30AQ: 40 Bar (S1/S2/S3/S4) & 225.0°C, CB110: 37 Bar (S1/S2/S3/S4) & 225.0°C, CB110AQ: 37 Bar (S1/S2/S3/S4) & 225.0°C, CBH110: 37 Bar (S1/S2/S3/S4) & 225.0°C, CB112: 37 Bar (S1/S2/S3/S4) & 225.0°C, CB112AQ: 37 Bar (S1/S2/S3/S4) & 225.0°C, CB24: 29 Bar (S1/S2) 37 Bar (S3/S4) & 225.0°C, CB24AQ: 29 Bar (S1/S2) 37 Bar (S3/S4) & 225.0°C, ANTW66: 29.0 Bar (S1/S2/S3/S4), ANTW18: 23 Bar (S1/S2) 28 Bar (S3/S4) 225.0°C and RM11: 15 Bar (S3/S4) & 225.0°C. Maximum operating temperatures detailed above are for primary circuits only, secondary circuits approved to 99oC.

Section:

1350 Heat Exchangers

Size:

See Models

Marking:

CB10, CB15, CB16, CB18 models: Manufacturers logo, model number and technical information on label on from of heat exchanger. CB20 and CB65 models: Manufacturers logo, model number, serial number, manufacturing date (yyyy.mm.dd), minimum and maximum working temperature, minimum and maximum working pressure and technical information on label on front of heat exchanger. Models added March 2023: Alfa Laval logo, Model, serial number on adhesive label.

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

CB10: Minimum number of plates 4, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB11: Minimum number of plates 8, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB15: Minimum number of plates 4, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB16/CBH16: Minimum number of plates 4, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB16AQ: Minimum number of plates 4, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections. CB18/CBH18: Minimum number of plates 4, Maximum number of plates 52. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB18AQ: Minimum number of plates 4, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections. CB18DW: Minimum number of plates 4, Maximum number of plates 52. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB20: Minimum number of plates 10, Maximum number of plates 110. Connection types: External thread or soldered. Connection Size/types: ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB20AQ: Minimum number of plates 10, Maximum number of plates 110. Connection Size/types: ¾” or 1” Male BSP connections. CB65/CBH65: Minimum number of plates 10, Maximum number of plates 150. Connection types: External thread or soldered. Connection Size/types: ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB65AQ: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” or 1” Male BSP connections Models added March 2023: CB30: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB30AQ: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CBH30: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB60: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB60AQ: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CBH60: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB62: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB62AQ: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CBH62: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB110: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. CB110AQ: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. CBH110: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. CB112: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. CB112AQ: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. CBH112: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. RM11: Minimum number of plates 28, Maximum number of plates 28. Connection Size/types: 22mm ID - soldered connection for use with copper tube conforming to EN 1057. CB24: Minimum number of plates 10, Maximum number of plates 56. Connection Size/types: ¾” - 2” BSP M. ANTW18: Minimum number of plates 10, Maximum number of plates 50. Connection Size/types: ¾” - 2” BSP M. ANTW66: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M.

Approval Holder:

Alfa Laval Ltd

Company Name

Alfa Laval Ltd

Address

Doman Road Camberley Surrey

Postcode

GU15 3DN

View All Listings by this Company

Range of static ultrasonic bulk water meters with stainless steel bodies and EPDM 'O'-rings. The products are supplied with two sets of optional (green) gaskets. Maximum operating temperature: Products marked T50: 65°C. Products marked T30: cold water use only.

Section:

1505 Water Meters

Size:

DN50 - DN100 flanged inlet and outlet.

Marking:

DIEHL METERING, CE, DN, maximum pressure, model name, T30 or T90, and other technical info on meter housing. Diehl Metering GmbH logo and flow arrow on body.

Installation Requirements:

R001 R008 R120

Expiry date:

31/03/2027

Model:

HYDRUS 2.0 Type 174 stainless steel (DN50-80: 200mm length, DN100: 250mm length).

Approval Holder:

Diehl Metering GmbH

Company Name

Diehl Metering GmbH

Address

Industriestraße 13 91522 Ansbach

Country

Germany

View All Listings by this Company

Manufacturer:

Diehl Metering GmbH

Company Name

Diehl Metering GmbH

Address

Industriestraße 13 91522 Ansbach

Country

Germany

View All Listings by this Company

Range of in-line ultrasonic water meters with epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1505 Water Meters

Size:

Please refer to model.

Marking:

Sensus on cover. Cordonel on box.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

Cordonel DN65, Cordonel DN80 & Cordonel DN100.

Product Images

Approval Holder:

Sensus UK Systems

Company Name

Sensus UK Systems

Address

North Wing Central 40, Crockford Lane, Basingstoke

Postcode

RG24 8GU

View All Listings by this Company

Manufacturer:

SensusGmbH Hannover

Company Name

SensusGmbH Hannover

Address

Meineckestrasse 10 30880 Laatzen

Postcode

Germany

View All Listings by this Company

Range of tee pieces with nickel plated brass bodies. Models 0912/15CVCC & 0912/CVCC incorporate a non-return valve (not suitable for backflow prevention) and stainless steel retaining clip. Compression connections to be used with copper pipe to BS EN 1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85˚C.

Section:

1530 Miscellaneous Fittings

Size:

see model

Marking:

Altecnic logo, casting date YYWW moulded on body

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

0912/22CC 22mm comp x 22mm spigot x 22mm spigot tee (22mm compression x 22mm tails) 0912/22CVCC 22mm comp x 22mm spigot x 22mm spigot tee c/w non return valve (22mm compression x 22mm tails) 0912/15CVCC 15mm comp x 15mm spigot x 15mm spigot tee c/w non return valve (15mm compression x 15mm tails) 0912/15CC 15mm comp x 15mm spigot x 15mm spigot (15mm compression x 15mm tails)

Approval Holder:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

General Email

sales@altecnic.co.uk

View All Listings by this Company

Manufacturer:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

General Email

sales@altecnic.co.uk

View All Listings by this Company

Wall mounted shower outlet elbow with a chromium plated brass body incorporating EPDM ‘O’-rings. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

2211307

Note:

Open outlet use only.

Size:

½” BSP (M).

Marking:

Gessi, Emporio on back plate.

Installation Requirements:

R001 R040

Expiry date:

30/11/2027

Model:

38761.

Product Images

Approval Holder:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi Hamlet Vintebbio Serravalle Sesia

Postcode

13037

Country

Italy

Phone

+39 0163 454111

General Email

pfornara@gessi.it

View All Listings by this Company

Manufacturer:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi Hamlet Vintebbio Serravalle Sesia

Postcode

13037

Country

Italy

Phone

+39 0163 454111

General Email

pfornara@gessi.it

View All Listings by this Company

‘Alpha’ range of circulator pumps with either a composite (plastic) or stainless steel body, plastic impellor and EPDM ‘O’-rings. The Alpha 1 model B CIL3 has a black motor housing. The Alpha 1 model B and the Alpha 2 model E stainless steel body models have either a black or red motor housing. All other models have a red motor housing. The 1”-1½” models are supplied with EPDM gaskets for the inlet and outlet. The 2” model has fibre/NBR gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2210907

Note:

R008 does not apply to the stainless steel body models.

Size:

Composite (CIL3) model: 1” BSP (M) inlet/outlet, Stainless steel (N) models: 1¼” BSP (M) inlet/outlet, 1½” BSP (M) inlet/outlet, 2” BSP (M) inlet/outlet.

Marking:

Grundfos, Grundfos logo and model type key on top of motor housing. Grundfos Holdings A/S, part no., serial no. and model on side of motor housing. Flow arrow on body.

Installation Requirements:

R001 R008

Expiry date:

31/10/2027

Model:

ALPHA1 **1-**2 N ***3 model B & ALPHA2 **1-**2 N ***3 model B/C/D/E. ALPHA1 **1-**2 CIL3 model B Where: **1 = size of inlet/outlet connection: 20 = 1 ¼”, 15 & 25 = 1 ½”, 32 = 2”. **2 = maximum head (dm): 40, 45, 50, 50/60, 60 & 80. N denotes stainless steel body. CIL3 denotes pump with composite (plastic body). ***3 = port to port length: 130, 150 & 180mm. (Note CIL3 model does not include a port length as it is only available in one size: 130mm). B/C/D/E indicates electronic options. For example: ALPHA2 25-50 N 130 model B. Alpha 2 pump type with 1 ½ BSP (M) inlet/outlet, 50 maximum head (dm), stainless steel pump housing and 130mm port to port length.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of centrifugal multi-stage horizontal pressure booster pumps with brass bodies. The 46593, 46594, 46595 and 46610 models include a non-return valve (not suitable for backflow protection) and an expansion vessel. They are also supplied inline strainer and two stainless steel braided EPDM lined flexible hose assemblies with 1” captive nut x 1" BSP (M) end connection for the inlet and outlet. Maximum working pressure models 46578, 46596, 46605 and 46606: 6.0 bar, Models 46593, 46594, 46595 and 46610: 9.0 bar. Maximum operating temperature 65°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2211047

Size:

46578, 46596, 46605 and 46606 models: 1” BSP (F). 46593, 46594, 46595 and 46610 models: 1” BSP (F) (to strainer).

Marking:

Stuart Turner and Stuart Turner logo on adhesive label on body

Installation Requirements:

R001 R415

Expiry date:

30/11/2027

Model:

46578: Stuart CH 4-30 FL, 46596: Stuart CH 4-40 FL, 46605: Stuart CH 4-50 FL, 46606: Stuart CH 4-60 FL. 46593: Stuart CH 4-30 B (with hoses), 46594: Stuart CH 4-40 B (with hoses), 46595: Stuart CH 4-50 B (with hoses), 46610: Stuart CH 4-60 B (with hoses).

Product Images

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Manufacturer:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of shower handsets with ABS plastic bodies (various finishes, see models). Maximum operating temperature (see models).

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2211019

Note:

Open outlet use only.

Size:

½” BSP (M).

Marking:

KY-LIN on body.

Installation Requirements:

R001 R040

Expiry date:

30/11/2027

Model:

88500075 - Chromium plated (75°C), 88500106 - Satin Blacked (75°C), 88500082 - Chromium plated (75°C), 88500074 - White coloured (60°C), 88500081 - White coloured (60°C), 88500069 – Satin Chromed (60°C), 88500099 - Satin Blacked (75°C), 88500070 - Chromium plated (75°C), 88500062 - White coloured (60°C), 88500061 - Chromium plated (75°C), 88500060 - White coloured (60°C), 88500068 – Satin Chromed (60°C), 88500083 - Chromium plated (75°C), 88500086 - White coloured (60°C), 88500084 - White coloured (60°C), 88500085 - Chromium plated (75°C). Model added October 2024 88500112 - Chromium plated (60 C).

Product Images

Approval Holder:

KyLin Sanitary Technology (Xiamen) Co. Ltd.

Company Name

KyLin Sanitary Technology (Xiamen) Co. Ltd.

Address

No 23 Hu li Ind Park, Mei Xi Dao, Tong An District, Xiamen

Country

China

View All Listings by this Company

Manufacturer:

KyLin Sanitary Technology (Xiamen) Co. Ltd.

Company Name

KyLin Sanitary Technology (Xiamen) Co. Ltd.

Address

No 23 Hu li Ind Park, Mei Xi Dao, Tong An District, Xiamen

Country

China

View All Listings by this Company

Range of shower handsets with ABS plastic bodies (various finishes, see models).. Maximum operating temperature (see models).

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2211020

Note:

Open outlet use only.

Size:

½” BSP male.

Marking:

KY-LIN on body of handset.

Installation Requirements:

R001 R040

Expiry date:

30/11/2027

Model:

88500056 – White (60°C) 88500057 – Chromium plated (65°C) 88500058 – White (60°C) 88500059 – Chromium plated (65°C)

Product Images

Approval Holder:

KyLin Sanitary Technology (Xiamen) Co. Ltd.

Company Name

KyLin Sanitary Technology (Xiamen) Co. Ltd.

Address

No 23 Hu li Ind Park, Mei Xi Dao, Tong An District, Xiamen

Country

China

View All Listings by this Company

Manufacturer:

KyLin Sanitary Technology (Xiamen) Co. Ltd.

Company Name

KyLin Sanitary Technology (Xiamen) Co. Ltd.

Address

No 23 Hu li Ind Park, Mei Xi Dao, Tong An District, Xiamen

Country

China

View All Listings by this Company

Range of deck mounted pull-out shower hose and handsets (various plated brass or stainless-steel bodies). The inlet to the shower handsets incorporates an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature: 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2212709

Note:

Open outlet use only.

Size:

½” BSP (F) captive nut on shower hose.

Marking:

VOLA on head of shower handset

Installation Requirements:

R001 R040

Expiry date:

31/12/2027

Model:

VOLA T1-XX, VOLA T1S-XX. Both models are available in either brass or stainless steel, where XX denotes different surface finishes and can be replaced with any of the following: Brass versions: 02 = grey, 04 = blue, 05 = orange, 06 = light green, 08 = yellow, 09 = dark grey, 12 = mocha, 14 = bright red, 15 = dark blue, 16 = chrome, 17 = gloss black, 18 = white, 19 = natural brass 20 = brushed chrome, 21 = carmine red, 25 = pink, 27 = matt black, 28 = matt white, 60 = black, 62 = deep black, 63 = copper, 65 = gold, 68 = nickel. Stainless steel versions: 40 = stainless steel, 62 = brushed black, 64 = brushed copper, 70 = brushed gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Shower kit consisting of shower handset, EPDM lined shower hose, wall outlet and riser rail, available in various finishes (see model). Maximum operating temperature 85.0°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2211037

Note:

Open outlet use only.

Size:

½” BSP (M).

Marking:

Coalbrook logo (brand of Davroc) on rear of Handset and Wall Outlet.

Installation Requirements:

R001 R040

Expiry date:

30/11/2027

Model:

XX4012YY. Where XX denotes the trim and can be replaced with: CO – Coalbrook. Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel, CP = Chrome, GM = Gunmetal, SB = Stable Brass, BB = Brushed Brass.

Product Images

Approval Holder:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

Country

United Kingdom

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Over head shower outlet with a chromium plated brass body, with a swivel function. Inlet incorporates NBR gasket with stainless-steel strainer and a flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2211308

Note:

Open outlet use only.

Size:

½”BSP (M).

Marking:

Gessi on back plate.

Installation Requirements:

R001 R040

Expiry date:

30/11/2027

Model:

47289.

Product Images

Approval Holder:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi Hamlet Vintebbio Serravalle Sesia

Postcode

13037

Country

Italy

Phone

+39 0163 454111

General Email

pfornara@gessi.it

View All Listings by this Company

Manufacturer:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi Hamlet Vintebbio Serravalle Sesia

Postcode

13037

Country

Italy

Phone

+39 0163 454111

General Email

pfornara@gessi.it

View All Listings by this Company