Instantor range of PPSU TH profile press fittings for use with Instantor Pert-AL-Pert pipe. Maximum operating pressure 10 bar. Maximum operating temperature 95°C
Range of brass and copper end feed fittings for use with copper pipe (manufactured to EN 1057). For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.
Range of blue epoxy coated carbon steel flanged dismantling joints with EPDM sealing rings. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
WC dual flush drop valve comprising of a plastic body and silicone seating washer. The valves are operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water only.
Type ‘J’ range of plate heat exchangers with stainless steel (AISI 304L or AISI 316L) fin and end plates. Maximum working pressure 3.0 bar (primary circuit) and 10.0 bar (secondary circuit). Maximum operating temperature 80°C.
Range of copper brazed, stainless steel (316) heat exchangers in various sizes (4-300 plates, see models). Maximum working pressure: see models. Maximum operating temperature: 99°C.
Range of electronically controlled heat interface units (HIU) with a stainless-steel plate heat exchanger providing space heating and instantaneous hot water. The domestic hot water (secondary) circuit incorporates a pressure relief valve (set at 10.0 bar). The inlets and outlets of all circuits incorporate a T-handled spherical valve. Maximum working pressures: 10.0 bar (Primary circuit), 9.5 Bar (Secondary circuit). Maximum operating temperature 95°C. Cold supply only.
Range of electromagnetic water meters with stainless steel bodies, dark grey ebonite rubber inner liner and stainless-steel (SUS316L) electrodes. Maximum working pressure 16.0 bar. Maximum operating temperature 40°C.
Individual threaded fitting with SUS316L body. Maximum working pressure: 6 bar Maximum operating temperature 90°C.
Water shock absorber incorporating a stainless-steel body and EPDM membrane. Maximum working pressure 15.0 bar. Maximum operating temperature 85°C.
Range of pressure transmitters with stainless steel bodies. Maximum working pressure 100.0 Bar Maximum operating temperature 80.0°C (Type 540) or 100.0°C (Type 520 & Type 522)
Range of standpipes for bath/showers with a brass body (various finishes, see model). The standpipes incorporate an approved flexible hose. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of electric water pumps, with stainless steel bodies, shaft and either stainless steel or plastic impellors. Maximum working pressure 8.5 Bar. Maximum operating temperature: See models.
Range of multistage pumps with stainless steel bodies Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
MBC 12-22WM & MBC 12-28WM models are wall mounted mains supply booster sets. They are supplied with two spherical isolation valves, a spherical bypass valve and two single check valve assemblies (suitable for backflow protection against Fluid Category 2). The check valve assemblies are to be installed in accordance with the manufacturers instructions, one upstream of the pump inlet and one after the bypass valve. The booster pump incorporates a plastic strainer on the inlet and a plastic flow regulator on the outlet and is housed within a wall mounted cabinet. MJ3 VM & MJ3 HM models are mains supply booster sets intended to be mounted on an expansion vessel (not supplied as part of the approval). They comprise of a pump, a suction and discharge manifold with bypass arrangement, and a spherical bypass valve which incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The booster pump incorporates a plastic strainer on the inlet and a plastic flow regulator on the outlet. Maximum working pressure: 6.0 bar. Maximum operating temperature: 35oC.
Range of booster pumps with stainless steel inlet manifolds, plastic bodies and impellers. The product incorporates a non-return valve. The ESYBOX MAX single models are also supplied with an optional 2” BSP (M) x 1¼” BSP (F) plastic inlet adaptor. Maximum working pressure 12.0 bar. Cold water use only.
Range of inline (301) or angle pattern (302) radiator valves with nickel-plated brass bodies, PTFE seats and EPDM sealing rings. The products are supplied with a dome operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Range of Y-patterned strainers with blue epoxy coated ductile iron bodies and a stainless-steel mesh strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of Y-patterned strainers with blue epoxy coated ductile iron bodies and a stainless-steel mesh strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| N BIB C | Chrome 6 | 1/2" BSP (M) | 5.0 bar | 65 °C | Bristan | Indices | No | 1/4 Turn ceramic disc | Not Applicable | Flow Straightener | |
| RP3 N BIB C | Chrome 3 | 1/2" BSP (M) | 5.0 bar | 65 °C | Bristan | Indices | No | 1/4 Turn ceramic disc | Not Applicable | Flow Straightener |
Page 503 of 522
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
