VSH XPRESS Range of ‘M’ profile stainless steel press fittings with EPDM ‘O’-rings for use with VSH SudoXPress stainless steel tube. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Range of blue epoxy coated carbon steel flanged dismantling joints with EPDM sealing rings. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Electric vented mains water heater with metal housing and silicon rubber gaskets. The inlet incorporates a combined EPDM washer and stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 98°C. Open outlet use only.
Range of ultrasonic water meters with brass (DN15-50) or plastic (DN15-20 only) bodies, EPDM ‘O’-rings and a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Water shock absorber incorporating a stainless-steel body and EPDM membrane. Maximum working pressure 15.0 bar. Maximum operating temperature 85°C.
Range of flanged ball type non-return valves with blue epoxy coated ductile iron bodies, EPDM lined ductile iron balls, and EPDM gaskets. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Range of electromagnetic flow meters with an epoxy coated (grey) carbon steel bodies, EPDM inner liner and stainless-steel electrodes. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Range of flow-compensated (thermostatic) temperature controllers incorporating a brass body with EPDM ‘O’-rings and gaskets. The valves incorporate a non-rising spindle headwork for temperature regulation. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C
Range of pressure sensors with stainless steel bodies, EPDM ‘O’-ring and ceramic measuring cell. Maximum working pressure 25.0 bar. Cold water use only.
Range of pressure transmitters with stainless steel bodies. The DST P140 G1/4 A (with O-ring) model also incorporates an EPDM ‘O’-ring. Maximum working pressure 50.0 bar. Maximum operating temperatures: DST P140 G1/4 A (with O-ring): 85°C, All other models: 90°C.
Range of flexible joints incorporating an EPDM (inner & outer) joint with a steel reinforcing ring and two carbon steel flanges. Maximum operating pressure 16.0 bar. Maximum operating temperature 65°C.
Range of rotary vane pumps with either brass, stainless-steel or plastic bodies, stainless steel impellor and EPDM ‘O’ rings. Maximum working pressure 20 Bar. Cold water use.
Range of electronic booster pumps with variable speed, incorporating stainless-steel bodies, impellers and shaft, EPDM gaskets and seals and an expansion vessel on the outlet. The pumps incorporate a drain port. Maximum working pressure 10.0 bar. Cold water use only.
Range of inline (301) or angle pattern (302) radiator valves with nickel-plated brass bodies, PTFE seats and EPDM sealing rings. The products are supplied with a dome operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Range of draining taps with brass or chrome plated brass bodies. Incorporating a rising spindle headwork, EPDM or NBR seals and washers. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of TPE and ISIFLEX flexible hose assemblies incorporating EPDM ‘O’-rings and various end connections. Maximum operating temperature 60°C. Open outlet use only.
Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. The 4GANc32 and 4GANc41 models incorporate an isolation valve. Max working pressure:10bar Max working temperature:85°c
Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of brass end connections (see models). “DN 9.5 ½” compression with ISO valve” model also incorporates a screwdriver operated isolation valve. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined flexible hose assemblies with DZR brass end connections. Some models incorporate spherical valves. Pushfit and compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of stainless steel braided, EPDM lined flexible hose assemblies with DZR brass end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of stainless steel or stainless steel with nylon, EPDM lined flexible hose assemblies with DZR brass end connections. Models 128-3009 CST & YU-JQAL222A are stainless steel wire, all other models are stainless steel with black nylon outer. Some models incorporate spherical valves, see models. Pushfit and compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of stainless steel braided or nylon braided EPDM lined hose assemblies available with a variety of end connectors. Maximum operating pressure 10.0 bar. Maximum operating temperature 90°C.
Range of air venting valves with blue epoxy coated ductile iron bodies, stainless steel floats and EPDM seals. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Range of eccentric flanged type butterfly valves with ductile iron bodies and disc (blue epoxy coated) and EPDM seats. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C
Range of lugged and wafer type butterfly valves with blue epoxy coated bodies, incorporating EPDM rubber ‘O’-rings and seat, and either a bronze (AB2), stainless steel (CF8 & CF8M) or blue epoxy coated or nickel plated, ductile iron (DI) disc. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of butterfly valves incorporating blue epoxy coated ductile iron bodies, stainless-steel discs and EPDM seats. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of butterfly valves with blue epoxy coated ductile iron bodies and discs with EPDM seats and a hand wheel operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of butterfly valves with blue epoxy coated ductile iron bodies, stainless steel discs and EPDM seats. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of wafer non-return valves with blue epoxy coated ductile iron bodies, stainless steel discs and EPDM seals. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of wafer non-return valves with blue epoxy coated ductile iron bodies, stainless steel discs and EPDM seals. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of flanged non-return valves with blue epoxy coated ductile iron bodies, EPDM lined ductile iron discs, and EPDM gaskets. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Range of adjustable pressure reducing valves with stainless steel bodies and an EPDM diaphragm. The JXP200X model: ½” - 2” sizes also include a gauge port. Maximum inlet supply pressure 16.0 bar. Outlet pressures are adjustable as follows: XXP150X and J2XP100X models between 1.0 to 16.0 bar, JXP200X models between 0.6 to 16.0 bar. Maximum operating temperature 85°C.
Range of pilot operated pressure reducing valves with ductile iron bodies (blue epoxy coating) and EPDM diaphragm and O-rings. The products are supplied with auxiliary fittings: spherical valves (bronze or stainless steel), pressure gauges, a pilot valve, a needle valve and stainless steel or copper tubes. Maximum inlet supply pressure 16.0 bar. The outlet pressure is adjustable between 0.67~16.0 bar. Maximum operating temperature 85°C.
Range of pilot operated pressure reducing valves with ductile iron bodies (blue epoxy coating) and EPDM diaphragm and gaskets. The products are supplied with auxiliary fittings: spherical valves, pressure gauges, a pilot valve, a needle valve and copper tubes. Maximum inlet supply pressure 16.0 bar. The outlet pressure is adjustable between 0.6~16.0 bar. Maximum operating temperature 85°C.
Range of latching solenoid valves with DZR brass bodies, EPDM diaphragms and ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
Latching solenoid valve with a black plastic body and an EPDM diaphragm. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C
Range of single lever ball valves with stainless steel bodies, ball, EPDM O-rings and PTFE gaskets. The press fit connection is to be used with stainless steel pipe manufactured to EN 10312. Maximum working pressure 16 bar. Maximum operating temperature 85°C.
Range of spherical isolation valves incorporating brass bodies (nickel plated), brass ball (chrome plated), brass stem and EPDM ‘O’-rings (screwdriver operated or T-type handle). For use with copper pipe (EN1057). Maximum working pressure 16.0 bar (model HC-60982-15) Maximum working pressure 25.0 bar (model HC-62022-15) Maximum operating temperature 85°C.
Range of in-line spherical valves with brass or nickel-plated brass bodies (see model), chrome plated ball, PTFE seats and EPDM O-rings. The products are supplied with either a lever operating member, magnetic lockable operating member, red or yellow butterfly handle or short lever operating member (see model). Compression and pressfit connections are for use with PEX/AL/PEX multilayer pipes manufactured to EN ISO 21003. The pressfit connection jointing is achieved via a crimping tool using a ‘U’ or ‘TH’ profile. Maximum working pressures: 255, 256 and 257 models: 20.0 bar, All other models: 16.0 bar. Maximum operating temperatures: 201, 207 and 209 models: 90°C, All other models: cold water only.
Range of in-line spherical valves with a nickel-plated brass body, chromium plated brass ball, PTFE seats and EPDM ‘O’-rings. The products are supplied with a lever or a butterfly handle (models with BH suffix). Compression end connections are for use with copper pipe or Irish copper pipe ((IS) models) (manufactured to EN1057). Maximum working pressures: S0231 prefix models: 16.0 bar. S0232 prefix models: 25.0 bar. Maximum operating temperature 85°C.
Range of flanged gate valves with blue epoxy coated ductile iron bodies and EPDM O-rings and disc. The valves are operated via a non-rising spindle headwork with a wheel type operating member. Maximum working pressure 16.0 Bar
Non-metallic materials and components comply with BS6920 at 80°C
Range of gate valves with ductile iron bodies (blue epoxy coated), EPDM coated wedge and EPDM O - rings. Maximum working pressure – 10.0 bar (DN900 and DN1000 only) and 16.0 bar (DN350 – DN800). Maximum operating temperature - 85°C
Gate valves with a blue epoxy coated ductile iron body, ductile iron wedge encapsulated in EPDM and EPDM ‘O’-rings. The valves operate via a non-rising spindle headwork with a hand wheel operating member. Maximum working pressures: DN50 - DN300: 25.0 bar. DN350 - 600: 16.0 bar. Maximum operating temperature 85°C.
Range of blue epoxy coated ductile iron gate valves with an EPDM coated ductile iron wedge. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of gate valves with ductile iron bodies (blue epoxy coated), EPDM coated wedges and non-rising spindles with hand wheel operating members. Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C
Range of gate valves with blue epoxy coated ductile iron bodies and EPDM wedges. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of gate valves with blue epoxy coated ductile iron bodies, EPDM coated ductile iron wedges. The valves operate via a non-rising spindle headwork with hand wheel operating member. Maximum working pressure –16.0 bar. Maximum operating temperature - 85°C
Range of flanged gate valves with blue epoxy coated ductile iron bodies and EPDM O-rings and disc. The valves are operated via a non-rising spindle headwork with a wheel type operating member. Maximum working pressure 16.0 Bar
Non-metallic materials and components comply with BS6920 at 80°C
Range of gate valves with blue epoxy coated ductile iron bodies, EPDM coated ductile iron wedges and a non-rising spindle with a handwheel operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of gate valves with blue epoxy coated ductile iron bodies, EPDM coated ductile iron wedges and a handwheel operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Page 46 of 47
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
