Section Code 2010 : Blending, thermostatic.
Back To Directory SectionsRange of floor standing, two-hole, single outlet, thermostatic blending valves (various finishes). Incorporating a sequential headwork controlling both flow and temperature with a single lever operating member. The product incorporates a self-cancelling diverter to overhead shower with a dome operating member. Outlet of the diverter incorporates approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Also supplied with shower hose and shower handset. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C
Range of concealed thermostatic bath/shower mixer valves (brass bodies), the valve can be supplied as a dedicated thermostatic valve or with a ¾” stop valve, 2way diverter or a 3way diverter that also controls the flow. The temperature is controlled independently via a thermostatic cartridge. Inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with various designs of face plates and operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, bar type thermostatic shower mixing valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with a single lever, dome, cubed or cross top operating member (depending on model). The temperature is controlled independently via a thermostatic cartridge with a single lever, dome, cubed or cross top operating member (depending on model) and incorporates a manual override button. The product also incorporates an approved check valve cartridge located on the inlets of the valve, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products also incorporate a stainless-steel strainer located on the inlets of the valve. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C
Range of wall mounted concealed digital blending, thermostatic shower units with plastic bodies with single or double outlets. Flow is controlled via solenoid valve. The units incorporate flow regulators, check valves, stainless steel strainer and EPDM O-rings. Models with “I” at the end of the model number are supplied with pushfit isolation valves on the inlets. Incorporates approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Wall mounted, concealed, digitally controlled thermostatic blending valve with a plastic body. Flow is controlled by an electronically operated mechanical valve and then to each outlet by a solenoid valve which is actuated via a touch sensor. Temperature is controlled by an electronically operated mixing valve containing a thermostatic element. Each inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The cold inlet incorporates a plastic flow regulator. Models with an ‘I’ suffix are supplied with two brass bodied 15mm x 15mm pushfit screwdriver operated isolation valves, for installation on each inlet. Maximum working pressure 5.0 Bar. Maximum operating temperature 65°C
Range of wall mounted two hole thermostatic blending valves having brass bodies (various finishes). Incorporating a 2 way ceramic disc diverter (2 on, 1 off) flow control which also diverts the flow from a shower to shower outlet with dome type operating members. The temperature is controlled independently via a thermostatic cartridge and dome type or lever type operating members. Inlets incorporates approved check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted bar type thermostatic shower valve (chromium plated brass) incorporating a manually operated diverter from overhead shower to shower handset, with a half turn ceramic disc headwork controlling the flow using a dome or cube type operating member depending on model. Product is supplied with a riser, shower hose, shower handset and over head shower The temperature is controlled independently via a thermostatic cartridge also using a dome or cube type operating member (Depending on model) that incorporates a manual override button. Both inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of wall mounted, exposed, thermostatic blending shower valves incorporating a ½ turn ceramic disc headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The 3663602665946 model has cube type operating members, the 3663602664956 model has dome type operating members. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Wall mounted, exposed, thermostatic blending shower valves incorporating a ½ turn ceramic disc headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button and dome type operating members. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of wall mounted thermostatic shower valves with brass bodies (various finishes) Incorporating ceramic disc headworks, and dome type operating members and a self cancelling diverter to the shower outlets. The temperature is controlled independently via a thermostatic cartridge and dome type operating member. The product is supplied with an overhead shower, riser rail, shower hose and handset. The inlet to the overhead shower incorporates a plastic flow regulator. Inlets to the main body incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, exposed bar type thermostatic shower valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with dome or cube type operating member. Temperature is controlled independently via a thermostatic cartridge with dome or cube type operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Also incorporates a stainless steel strainer located on both inlets. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C
Range of thermostatic mixing valves (brass body) with a thermostatic cartridge controlling the temperature. Models are supplied with dome or cube type operating members and a chrome faceplate. Each inlet incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 60 °C.
Range of wall mounted concealed thermostatic blending valves (brass), incorporating either quarter turn ceramic disc headworks (models PG-2107-1 & PG-2108-1) with either dome type (PG-2108) or single lever (PG-2108-1) operating members, or a manual diverter (models PG-2107 & PG-2108) with either cube type (PG-2107) or single lever (PG-2108) operating members. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure: 10.0 bar. Maximum operating temperature: 60°C.
Range of wall mounted, two-hole, single shower outlet combination tap assemblies (chromium plated brass). The flow is controlled by a ceramic disc headwork (with various operating members). temperature is controlled VIA a thermostatic cartridge (with various operating members which incorporate a manual override button). Both inlets incorporate approval single check valve cartridges, however the complete unit has not been tested to show it provides back flow protection. Models ST20015CP & COOR incorporate elbows. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted, exposed thermostatic shower valves (chromium plated brass). Flow is controlled by a quarter turn ceramic cartridge headwork and temperature is controlled independently via a thermostatic cartridge, both with dome operating members. Both inlets incorporate stainless steel strainers. Some valves are supplied with shower hose, riser rail and shower handset (please refer to model). Some valves are supplied with shower hose, riser rail, shower handset & overhead shower (please refer to model). On these models the flow is diverted between shower handset & overhead shower by the quarter turn ceramic cartridge headwork. The inlets of models (Atom ERD – (1.1836.003) Coda Pro ERD – (1.1836.006) Relate ERD – (2.1878.002) Reflex ERD – (2.1878.004) APT ERD – (1.1878.008) & React ERD – (2.1878.006) incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Wall mounted thermostatic shower valve (chromium plated brass) incorporating a two way ceramic disc diverter controlling the flow to either the shower handset or an overhead shower using a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a dome or cube type operating member. The product is supplied with an overhead shower, riser rail, shower hose and handset. Each inlet incorporates a stainless steel strainers and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Thermostatic mixing valve with brass body. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower valves (chromium plated brass body), incorporating a quarter turn ceramic disc headwork controlling the flow and thermostatic cartridge controlling the temperature, both with dome type operating members. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, two-hole, thermostatic shower valves (chromium plated brass). In models TLM28F, TLM28G, TLM28H, TLM28I, TLM90, TLM90B, TLM95, TLM95B and TLM01F flow is controlled via a quarter turn ceramic disc headwork with dome or cube operating members. In models TLM46F, TLM46G, TLM46H, TLM46I, TLM39F and TLM39G flow is controlled via a half turn ceramic disc headwork with dome or cube operating members. The temperature is controlled by a thermostatic cartridge with dome or cube type operating members which incorporate a manual override button. The inlets incorporate a stainless-steel strainer and an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C
Shower kit consisting of a wall mounted thermostatic bar type shower valve with a non-rising spindle headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge which incorporates a manual override button with dome operating members. The inlets incorporate a stainless steel strainer and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides back flow protection. Product also comes with a stainless steel braided hose with EPDM lining, a chromium plated plastic shower handset and riser rail. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, exposed, bar type thermostatic shower valve (chromium plated brass) or Black incorporating a two-way ceramic disc headwork controlling and diverting the flow to either an overhead shower outlet or shower handset (not supplied). The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The products are supplied with the following operating members: cube (9323T & 9323TBL Model), dome (9320T & 9320TBL Model). Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar, Maximum operating temperature 85°C
Wall mounted, thermostatic shower blending valve (chromium plated brass), incorporating a non- rising spindle headworks with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a manual override button and a single lever operating member. Both inlets incorporate stainless-steel strainers and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate It provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, exposed bar type thermostatic shower blending valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork with a single lever operating member which controls the flow and an independent thermostatic cartridge controlling the temperature with a single lever operating member. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of concealed thermostatic shower blending valves (DZR brass) and chrome plated trim sets, incorporating quarter turn ceramic disc headworks controlling the flow with single lever operating members. The 3552697090 model has two headworks controlling the flow to two independent outlets. The 3554697090 model has three headworks controlling the flow to three independent outlets. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Both inlets incorporate a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
‘Grohtherm’ THM range of wall mounted, thermostatic shower blending valves, incorporating a 2-way ceramic disc headwork (central off position) with a single lever operating member controlling and diverting the flow to either an overhead shower outlet or bath outlet (not supplied). Temperature is controlled independently via a thermostatic cartridge with a dome shape operating member incorporating a manual override button. Each inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, concealed, digitally controlled thermostatic blending valve with a plastic body, flow is controlled by solenoid valves actuated via a touch sensor. Both inlets incorporate approved single check valve cartridges (however, the complete assemblies have not been fully tested to demonstrate that they provide adequate backflow protection). Maximum working pressure 6.0 Bar. Maximum operating temperature 80ºC.
Range of T-type thermostatic mixing valves with DZR brass bodies, EPDM ‘O’-rings. The product is supplied with a specific tool that allows a manual override of the valve for disinfection purposes. Maximum working pressure 14.0 Bar. Maximum operating temperature 90°C.
Range of wall mounted, thermostatic shower valves (chromium plated brass), incorporating a ceramic disc headworks controlling the flow to either overhead or hand showers (not supplied) using dome type operating members. Temperature is controlled independently via a thermostatic cartridge, also using a dome type operating member. Inlets incorporate approved check valve cartridges, however the complete product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 85°C.
Wall mounted thermostatic blending valve (chromium plated brass) incorporating a ceramic disc headwork which controls the flow to optional shower outlets using single lever operating members. The temperature is controlled independently via a thermostatic cartridge with dome type operating member incorporating a manual override button. Inlets incorporate stainless steel strainers and approved single check valves however, the complete product has not been fully tested to demonstrate it provides adequate backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted, bar type thermostatic shower valve (chromium plated brass) incorporating quarter turn ceramic disc headwork with dome type operating members and manual override. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate stainless steel strainers and an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of wall mounted two-hole, single outlet (fixed) shower mixers (brass bodies chromium plated), temperature is controlled independently via a thermostatic cartridge. The flow is controlled via a 2 way ceramic disc headwork which controls the flow to the over head and handheld shower outlets (not supplied) and is operated by various operating members. The thermostatic valve operating member incorporates a manual override button. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of bar type thermostatic mixing valves. Flow is controlled via a quarter turn ceramic disc headwork using a dome type operating memeber. Temperature is controlled independently via a thermostatic mixing valve also using a dome type operating memeber. Inlets incorporate a single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Model FZ SHXMMCTFF C is supplied with a shower hose, shower handset and a riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of bar type thermostatic mixing valves, incorporating a quarter turn ceramic disc headwork controlling the flow using a down type operating member. Temperature is controlled via a thermostatic cartridge also using a dome type operating member. Inlets incorporate single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models ZI SHXSMCT C & ZI SHXSMCTFF C are supplied with a shower hose, handset and a riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted, concealed thermostatic shower blending valves with a DZR brass body and trim set (various finishes and operating members - see model section). The C78023 models incorporate a ¼ turn ceramic disc valve controlling the flow to a single shower outlet. The C78024 models incorporate a 2 way ceramic disc headwork controlling the flow between 2 shower outlets. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Wall mounted thermostatic bar type shower valves with a non-rising spindle headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member which incorporates a manual override button. Each inlet incorporates a combined EPDM washer and stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is also supplied with a shower riser rail, shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic bar type shower valves with a quarter turn ceramic disc headwork controlling the flow with a cubed operating member. The temperature is controlled independently via a thermostatic cartridge with a cubed operating member which incorporates a manual override button. Each inlet incorporates a combined EPDM washer and stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is also supplied with a shower riser rail, shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic bar type shower valves with a quarter turn ceramic disc headwork controlling the flow with a cubed operating member. The temperature is controlled independently via a thermostatic cartridge with a cubed operating member which incorporates a manual override button. Each inlet incorporates a combined EPDM washer and stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is also supplied with a shower riser rail, shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
T-Type thermostatic mixing valve (chromium plated brass). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted two hole thermostatic shower valve having a brass body (various finishes) Incorporating quarter turn ceramic disc headworks, and dome type operating members and stainless steel strainers. The temperature is controlled independently via a thermostatic cartridge and dome/lever/crosstop operating member. Inlets incorporate a single check valve assembly, however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, two-hole, single shower outlet combination tap assemblies (chromium plated brass). The flow is controlled by a ceramic disc headwork (with various operating members). temperature is controlled VIA a thermostatic cartridge (with various operating members which incorporate a manual override button). Both inlets incorporate approval single check valve cartridges, however the complete unit has not been tested to show it provides back flow protection. Models IN10015CP incorporate elbows. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
A range of wall mounted, concealed thermostatic shower blending valves with a DZR brass body and trim set (various finishes and operating members - see model section). The C99865ST-9 model controls the flow to two shower outlets. The C78024 models controls the flow between 3 shower outlets. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Concealed wall mounted thermostatically controlled 3 button shower outlet. Flow is controlled to 3 optional outlets via click button flow control headwork. The temperature is controlled independently via a thermostatic control valve and lever type operating member. Inlets incorporate a single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides suitable backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of concealed thermostatic blending valves having brass bodies and NBR ‘O’-rings, incorporating a ceramic cartridge headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge with a various operating members. Both inlets incorporate a single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection), plastic filters and flow regulators. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Concealed, wall mounted, thermostatic blending valve (brass body) with chromium plated trim set incorporating a single sequential headwork controlling flow and temperature with a single lever operating member. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with an optional 15mm compression isolation valve for each inlet. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.
Wall mounted, thermostatic blending valve shower valve with brass body, incorporating a ceramic disc headwork with dome or cubed type operating members. Temperature is controlled independently via a thermostatic cartridge with a dome or cubed type operating member incorporating a manual override button. Each inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of T-type thermostatic blending valves with chromium plated brass bodies. The inlets incorporate a stainless-steel strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Wall mounted thermostatic shower valve (chromium plated brass) incorporating a two way ceramic disc diverter controlling the flow to either the shower handset or an overhead shower using a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a dome or cube type operating member. The product is supplied with an overhead shower, riser rail, shower hose and handset. Each inlet incorporates a stainless steel strainers and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of Wall mounted, concealed, thermostatic shower valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork which controls the flow using various operating members. Temperature is controlled independently via a thermostatic cartridge also using various operating members. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C
‘Securitouch’ range of wall mounted, manually operated, exposed shower valves (chromium plated brass), incorporating a ceramic cartridge headwork controlling both flow and temperature using a single lever operating member. The products (except for S suffix models) are supplied with ¾” x ½” offset union adaptors which incorporate a servicing valve. The inlets of models containing EP include plastic filters and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. All other models incorporate plastic flow regulators on each inlet and an approved single check valve cartridge on the outlet, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted, exposed bar type thermostatic blending valve (chromium plated brass), incorporating a quarter turn ceramic disc controlling the flow with single lever operating members. The temperature is controlled independently via a thermostatic cartridge with single lever operating members. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Page 3 of 14
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.