U Profile range of press fittings incorporating EPDM ‘O’-rings. For use with MONFLEX PEXB/AL/PEXB MULTILAYER PIPES. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2304380

Size:

16-32mm. BSP threaded connections: ½” - 1½” (M) or (F).

Marking:

Fitting: Ebrille & size Pipe: Ebrille and product info on pipe.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

EBRILLE 'U' FITTINGS Straight: REM16X16 REM18X18 REM20X20 REM25X25 REM32X32 Reduced straight: REMR20X16 REMR20X18 REMR25X16 REMR25X18 REMR25X20 REMR26X16 REMR26X18 REMR26X20 REMR32X16 REMR32X18 REMR32X20 REMR32X25 REMR32X26 Male straight: REDFM16X1/2 REDFM16X3/4 REDFM18X1/2 REDFM20X1/2 REDFM20X1 REDFM25X1/2 REDFM25X3/4 REDFM25X1 REDFM26X1/2 REDFM26X3/4 REDFM26X1 REDFM32X1/2 REDFM32X3/4 REDFM32X1 REDFM32X11/4 REDFM32X11/2 Female straight: REDFF16X1/2 REDFF16X3/4 REDFF16X1 REDFF18X1/2 REDFF18X3/4 REDFF20X1/2 REDFF20X3/4 REDFF20X1 REDFF25X1/2 REDFF25X3/4 REDFF25X1 REDFF26X1/2 REDFF26X3/4 REDFF26X1 REDFF32X1/2 REDFF32X3/4 REDFF32X1 REDFF32X11/4 REDFF32X11/2 Elbow: RE90°16X16 RE90°18X18 RE90°20X20 RE90°25X25 RE90°26X26 RE90°32X32 Male elbow: RE90°FM16X1/2 RE90°FM16X3/4 RE90°FM18X1/2 RE90°FM18X3/4 RE90°FM20X1/2 RE90°FM20X3/4 RE90°FM20X1 RE90°FM25X1/2 RE90°FM25X3/4 RE90°FM25X1 RE90°FM26X1/2 RE90°FM26X3/4 RE90°FM26X1 RE90°FM32X1/2 RE90°FM32X3/4 RE90°FM32X1 RE90°FM32X11/4 Female elbow: RE90°FF16X1/2 RE90°FF16X3/4 RE90°FF18X1/2 RE90°FF18X3/4 RE90°FF20X1/2 RE90°FF20X3/4 RE90°FF20X1 RE90°FF25X1/2 RE90°FF25X3/4 RE90°FF25X1 RE90°FF26X1/2 RE90°FF26X3/4 RE90°FF26X1 RE90°FF32X1/2 RE90°FF32X3/4 RE90°FF32X1 RE90°FF32X1 1/4 Wall plated elbow: RE90°M16X1/2 RE90°M16X3/4 RE90°M18X1/2 RE90°M20X1/2 RE90°M20X3/4 Tee: RET16X16X16 RET18X18X18 RET20X20X20 RET25X25X25 RET26X26X26 RET32X32X32 Reduced tee: RETR16X20X16 RETR16X25X16 RETR16X26X16 RETR18X16X18 RETR18X20X18 RETR18X25X18 RETR18X26X18 RETR20X16X20 RETR20X18X20 RETR20X25X20 RETR25X16X25 RETR25X16X16 RETR26X16X16 RETR25X18X25 RETR25X20X25 RETR25X32X25 RETR20X26X20 RETR26X16X26 RETR26X18X26 RETR26X20X26 RETR26X32X26 RETR32X16X32 RETR32X18X32 RETR32X20X32 RETR32X25X32 RETR25X16X20 RETR32X20X25 RETR26X16X20 RETR32X20X26 RETR20X16X16 RETR20X20X16 RETR25X25X18 RETR25X25X20 RETR25X18X18 RETR25X20X20 RETR25X16X20 RETR32X20X25 RETR26X26X16 RETR26X26X18 RETR26X26X20 RETR26X18X18 RETR26X20X20 RETR26X20X16 RETR32X20X26 RETR32X32X16 RETR32X32X20 RETR32X32X26 RETR32X25X25 RETR32X26X26 RETR32X26X32 Male tee: RETFM16X1/2X16 RETFM16X3/4X16 RETFM20X1/2X20 RETFM20X3/4X20 Female tee: RETFF16X1/2X16 RETFF16X3/4X16 RETFF18X1/2X18 RETFF18X3/4X18 RETFF20X1/2X20 RETFF20X3/4X20 RETFF20X1X20 RETFF25X1/2X25 RETFF25X3/4X25 RETFF25X1X25 RETFF26X1X26 RETFF26X3/4X26 RETFF26X1X26 RETTFF32X1/2X32 RETFF32X3/4X32 RETFF32X1X32 RETFF32X11/4X32 Cap: REC16 REC18 REC20 REC25 REC26 REC32 Female union: REDFFL16X1/2 REDFFL16X3/4 REDFFL20X1/2 REDFFL20X3/4 REDFFL25X1/2 REDFFL25X3/4 REDFFL25X1 REDFFL26X1/2 REDFFL26X3/4 REDFFL26X1 REDFFL32X1 TO BE USED WITH MONOFLEX PEXB/ALPEXB MULTILAYER PIPES: MZ16X2MONFLEXMT100 MZ16X2MONFLEXMT200 MZ16X2MONFLEXMT400 MZ18X2MONFLEXMT100 MZ20X2MONFLEXMT100 MZ20X2MONFLEXMT200 MZ20X2MONFLEXMT400 MZ25X2,5MONFLEXMT100 MZ26X3MONFLEXMT100 MZ32X3MONFLEXMT100

Approval Holder:

Ebrille s.r.l.

Company Name

Ebrille s.r.l.

Address

Administration and Esablishment, Straded Canelli, 53A - 14049 Nizza Monferrato AT

Country

Italy

View All Listings by this Company

Range of stainless steel (SUS304/316L) crimp fittings incorporating EPDM ‘O’-rings. For use with Mingshi stainless steel pipes (SUS304/316L). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303405

Size:

see model

Marking:

BECLI Logo, size & material on pipe and fitting body.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

Male threaded coupler: S15х1/2"W: 15 x ½” BSP (M), S15х3/4"W: 15 x ¾” BSP (M), S18х1/2"W: 18 x ½” BSP (M), S18х3/4"W: 18 x ¾” BSP (M), S22х1/2"W: 22 x ½” BSP (M), S22х3/4"W: 22 x ¾” BSP (M), S22х1"W: 22 x 1” BSP (M), S28х3/4"W: 28 x ¾” BSP (M), S28x1"W: 28 x 1” BSP (M), S35x1"W: 35 x 1” BSP (M), S35x1 1/4"W: 35 x 1¼” BSP (M), S42х1 1/2"W: 42 x 1½” BSP (M), S54х2"W: 54 x 2” BSP (M). Male threaded coupler with straight pipe: 15х1/2"W: 15 x ½” BSP (M), 15x3/4"W: 15 x ¾” BSP (M), 18х1/2"W: 18 x ½” BSP (M), 18х3/4"W: 18 x ¾” BSP (M), 18x1"W: 18 x 1” BSP (M), 22х1/2"W: 22 x ½” BSP (M), 22х3/4"W: 22 x ¾” BSP (M), 22x1"W: 22 x 1” BSP (M), 28х3/4"W: 28 x ¾” BSP (M), 28х1"W: 28 x 1” BSP (M), 35х1 1/4"W: 35 x 1¼” BSP (M), 42х1 1/2"W: 42 x 1½” BSP (M), 54х2"W: 54 x 2” BSP (M). Female threaded coupler: S15х1/2"N: 15 x ½” BSP (F), S18х1/2"N: 18 x ½” BSP (F), S18х3/4"N: 18 x ¾” BSP (F), S22х1/2"N: 22 x ½” BSP (F), S22х3/4"N: 22 x ¾” BSP (F), S28х3/4"N: 28 x ¾” BSP (F), S28х1"N: 28 x 1” BSP (F), S35x1"N: 35 x 1” BSP (F), S35x1 1/4"N: 35 x 1¼” BSP (F), S42х1 1/2"N: 42 x 1½” BSP (F), S54х2"N: 54 x 2” BSP (F). Female threaded coupler with straight pipe: 15х1/2"N: 15 x ½” BSP (F), 15x3/4"N: 15 x ¾” BSP (F), 18х1/2"N: 18 x ½” BSP (F), 18х3/4"N: 18 x ¾” BSP (F), 18x1"N: 18 x 1” BSP (F), 22х1/2"N: 22 x ½” BSP (F), 22х3/4"N: 22 x ¾” BSP (F), 22x1"N: 22 x 1” BSP (F), 28х3/4"N: 28 x ¾” BSP (F), 28х1"N: 28 x 1” BSP (F), 35х1 1/4"N: 35 x 1¼” BSP (F), 42х1 1/2"N: 42 x 1½” BSP (F), 54х2"N: 54 x 2” BSP (F). Coupler: S15: 15 x 15mm, S18х15: 18 x 15mm, S18: 18 x 18mm, S22х18: 22 x 18mm, S22х15: 22 x 15mm, S22: 22 x 22mm, S28х15: 28 x 15mm, S28х22: 28 x 22mm, S28: 28 x 28mm, S35х28: 35 x 28mm, S35: 35 x 35mm, S42х35: 42 x 35mm, S42: 42 x 42mm, S54х42: 54 x 42mm, S54: 54 x 54mm. Coupler with straight pipe: S18х15Ⅱ: 18 x 15mm, S22х15Ⅱ: 22 x 15mm, S22х18Ⅱ: 22 x 18mm, S28х15Ⅱ: 28 x 15mm, S28х18Ⅱ: 28 x 18mm, S28х22Ⅱ: 28 x 22mm, S35х15Ⅱ: 35 x 15mm, S35х18Ⅱ: 35 x 18mm, S35х22Ⅱ: 35 x 22mm, S35х28Ⅱ: 35 x 28mm, S42х22Ⅱ: 42 x 22mm, S42х28Ⅱ: 42 x 28mm, S42х35Ⅱ: 42 x 35mm, S54х28Ⅱ: 54 x 28mm, S54х35Ⅱ: 54 x 35mm, S54х42Ⅱ: 54 x 42mm. Adjustable connector: S15Ⅱ: 15 x 15mm, S18Ⅱ: 18 x 18mm, S22Ⅱ: 22 x 22mm, S28Ⅱ: 28 x 28mm, S35Ⅱ: 35 x 35mm, S42Ⅱ: 42 x 42mm, S54Ⅱ: 54 x 54mm. Union: H15х1/2": 15 x ½” captive nut, H15х3/4": 15 x ¾” captive nut, H18х1/2": 18 x ½” captive nut, H18х3/4": 18 x ¾” captive nut, H22х1/2": 22 x ½” captive nut, H22х3/4": 22 x ¾” captive nut, H28х3/4": 28 x ¾” captive nut, H28х1": 28 x 1” captive nut, H35x1": 35 x 1” captive nut, H35x1 1/4": 35 x 1¼” captive nut, H42х1 1/2": 42 x 1½” captive nut, H54х2": 54 x 2” captive nut. Tee: T15: 15 x 15 x 15mm, T18х15х18: 18 x 15 x 18mm, T18: 18 x 18 x 18mm, T22х18х22: 22 x 18 x 22mm, T22х15х22: 22 x 15 x 22mm, T22: 22 x 22 x 22mm, T28x15x28: 28 x 15 x 28mm, T28х22х22: 28 x 22 x 22mm, T28x22x28: 28 x 22 x 28mm, T28: 28 x 28 x 28mm, T35x15x35: 35 x 15 x 35mm, T35x22x35: 35 x 22 x 35mm, T35x28x35: 35 x 28 x 35mm, T35: 35 x 35 x 35mm, T42х35х42: 42 x 35 x 42mm, T42: 42 x 42 x 42mm, T54х42х54: 54 x 42 x 54mm, T54: 54 x 54 x 54mm. Female threaded Tee: T15х1/2"Nx15: 15 x ½” BSP (F) x 15mm, T18х1/2"Nx18: 18 x ½” BSP (F) x 18mm, T18х3/4"Nx18: 18 x ¾” BSP (F) x 18mm, T22х1/2"Nx22: 22 x ½” BSP (F) x 22mm, T22х3/4"Nx22: 22 x ¾” BSP (F) x 22mm, T28х1/2"Nx28: 28 x ½” BSP (F) x 28mm, T28х3/4"Nx28: 28 x ¾” BSP (F) x 28mm, T28х1"Nx28: 28 x 1” BSP (F) x 28mm, T35х1"Nx35: 35 x 1” BSP (F) x 35mm, T35х1 1/4"Nx35: 35 x 1¼” BSP (F) x 35mm, T42х1 1/2"Nх42: 42 x 1½” BSP (F) x 42mm, T54х2"Nх54: 54 x 2” BSP (F) x 54mm. Male threaded Tee: T15х1/2"Wx15: 15 x ½” BSP (M) x 15mm, T18х1/2"Wx18: 18 x ½” BSP (M) x 18mm, T18х3/4"Wx18: 18 x ¾” BSP (M) x 18mm, T22х1/2"Wx22: 22 x ½” BSP (M) x 22mm, T22х3/4"Wx22: 22 x ¾” BSP (M) x 22mm, T28х1/2"Wx28: 28 x ½” BSP (M) x 28mm, T28х3/4"Wx28: 28 x ¾” BSP (M) x 28mm, T28х1"Wx28: 28 x 1” BSP (M) x 28mm, T35х1"Wx35: 35 x 1” BSP (M) x 35mm, T35х1 1/4"Wx35: 35 x 1¼” BSP (M) x 35mm, T42х1 1/2"Wх42: 35 x 1½” BSP (M) x 35mm, T54х2"Wх54: 54 x 2” BSP (M) x 54mm. 90°B Elbow: L15a: 15 x 15mm, L18а: 18 x 18mm, L22a: 22 x 22mm, L28a: 28 x 28mm, L35a: 35 x 35mm, L42а: 42 x 42mm, L54а: 54 x 54mm. 90°A Elbow: L15: 15 x 15mm, L18: 18 x 18mm, L22: 22 x 22mm, L28: 28 x 28mm, L35: 35 x 35mm, L42: 42 x 42mm, L54: 54 x 54mm. Female threaded elbow: L15х1/2"N: 15 x ½” BSP (F), L18х1/2"N: 18 x ½” BSP (F), L18х3/4"N: 18 x ¾” BSP (F), L22х1/2"N: 22 x ½” BSP (F), L22х3/4"N: 22 x ¾” BSP (F), L28х3/4"N: 28 x ¾” BSP (F), L35х1"N: 35 x 1” BSP (F). Male threaded elbow: L15x1/2"W: 15 x ½” BSP (M), L18х1/2"W: 18 x ½” BSP (M), L18х3/4"W: 18 x ¾” BSP (M), L22x1/2"W: 22 x ½” BSP (M), L22x3/4"W: 22 x ¾” BSP (M), L28x3/4"W: 28 x ¾” BSP (M), L35x1"W: 35 x 1” BSP (M). Female threaded elbow with base: L15х1/2"N(a): 15 x ½” BSP (F), L18х1/2"N(a): 18 x ½” BSP (F), L22х1/2"N(a): 22 x ½” BSP (F), L22х3/4"N(a): 22 x ¾” BSP (F). 45°B Elbow: 45°L15a: 15 x 15mm, 45°L18а: 18 x 18mm, 45°L22a: 22 x 22mm, 45°L28a: 28 x 28mm, 45°L35a: 35 x 35mm, 45°L42а: 42 x 42mm, 45°L54а: 54 x 54mm. 45°A Elbow: 45°L15: 15 x 15mm, 45°L18: 18 x 18mm, 45°L22: 22 x 22mm, 45°L28: 28 x 28mm, 45°L35: 35 x 35mm, 45°L42: 42 x 42mm, 45°L54: 54 x 54mm. One end pipe bridge: Ω15a: 15 x 15mm, Ω18a: 18 x 18mm, Ω22a: 22 x 22mm. Pipe Bridge: Ω15: 15 x 15mm, Ω18: 18 x 18mm, Ω22: 22 x 22mm, Ω28: 28 x 28mm. Cap: D15: 15 x 15mm, D18: 18 x 18mm, D22: 22 x 22mm, D28: 28 x 28mm, D35: 35 x 35mm, D42: 42 x 42mm, D54: 54 x 54mm. Pipe: Mingshi Stainless Steel Pipe (To EN 10312) 15mm to 54mm.

Approval Holder:

Eduardo Alvarez LDA

Company Name

Eduardo Alvarez LDA

Address

Rua Central N. 24 Cabecas 2300-317 Tomar

Country

Portugal

Phone

0035 1919414508

General Email

trading.ealvarez@gmail.com

View All Listings by this Company

Range of press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404075

Size:

For size see models

Marking:

Valtren logo 'indi', size, WRAS and date of manufacture (mm/yy) on body

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

STRAIGHT COUPLING CxC: 60111515 60112222 60112828 60113535 60114242 60115454 SLIP COUPLING C x C: 60171515 60172222 60172828 60173535 60174242 60175454 REDUCING COUPLING C x C: 60112215 60112815 60112822 60113515 60113522 60113528 60114215 60114222 60114228 60114235 60115415 60115422 60115428 60115435 60115442 FITTING REDUCER F x C: 60132215 60132815 60132822 60133515 60133522 60133528 60134215 60134222 60134228 60134235 60135415 60135422 60135428 60135435 60135442 90DEG ELBOW C x C: 60411515 60412222 60412828 60413535 60414242 60415454 90DEG STREET ELBOW F x C: 60431515 60432222 60432828 60433535 60434242 60435454 45DEG ELBOW C x C: 60451515 60452222 60452828 60453535 60454242 60455454 45DEG STREET ELBOW F x C: 60481515 60482222 60482828 60483535 60484242 60485454 CAP C x C: 60811515 60812222 60812828 60813535 60814242 60815454 EQUAL TEE C x C: 60151515 60222222 60282828 60353535 60424242 60545454 PART CROSSOVER F x C: 60271515 - 15mm 60272222 - 22mm CROSSOVER C x C: 60291515 - 15mm 60292222 - 22mm REDUCER ELBOW 60412215 - 22mm x 15mm REDUCING TEE: 60221515 60221522 60282222 60282228 60222215 60282815 60282822 60353515 60353522 60353528 60424215 60424222 60424228 60424235 60545415 60545422 60545428 60545435 60545442

Approval Holder:

Valtren Distribution Ltd

Company Name

Valtren Distribution Ltd

Address

10 Aylesbury Court Lapworth

Postcode

B94 6BE

Country

United Kingdom

General Email

07771 755057

View All Listings by this Company

Hyddro Range of stainless steel (SUS304/316L) crimp fittings incorporating EPDM ‘O’-rings. For use with Hyddro stainless steel pipes (SUS304/316L). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303406

Size:

see model

Marking:

Hyddro by GFS, size & material on pipe and fitting body.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

Male threaded coupler: HYD-SS-MC-01 S15х1/2"W: 15 x ½” BSP (M) HYD-SS-MC-02 S15х3/4"W: 15 x ¾” BSP (M) HYD-SS-MC-03 S18х1/2"W: 18 x ½” BSP (M) HYD-SS-MC-04 S18х3/4"W: 18 x ¾” BSP (M) HYD-SS-MC-05 S22х1/2"W: 22 x ½” BSP (M) HYD-SS-MC-06 S22х3/4"W: 22 x ¾” BSP (M) HYD-SS-MC-07 S22х1"W: 22 x 1” BSP (M) HYD-SS-MC-08 S28х3/4"W: 28 x ¾” BSP (M) HYD-SS-MC-09 S28x1"W: 28 x 1” BSP (M) HYD-SS-MC-10 S35x1"W: 35 x 1” BSP (M) HYD-SS-MC-11 S35x1 1/4"W: 35 x 1¼” BSP (M) HYD-SS-MC-12 S42х1 1/2"W: 42 x 1½” BSP (M) HYD-SS-MC-13 S54х2"W: 54 x 2” BSP (M). Male threaded coupler with straight pipe: HYD-SS-MP-01 15х1/2"W: 15 x ½” BSP (M) HYD-SS-MP-02 15x3/4"W: 15 x ¾” BSP (M) HYD-SS-MP-03 18х1/2"W: 18 x ½” BSP (M) HYD-SS-MP-04 18х3/4"W: 18 x ¾” BSP (M) HYD-SS-MP-05 18x1"W: 18 x 1” BSP (M) HYD-SS-MP-06 22х1/2"W: 22 x ½” BSP (M) HYD-SS-MP-07 22х3/4"W: 22 x ¾” BSP (M) HYD-SS-MP-08 22x1"W: 22 x 1” BSP (M) HYD-SS-MP-09 28х3/4"W: 28 x ¾” BSP (M) HYD-SS-MP-10 28х1"W: 28 x 1” BSP (M) HYD-SS-MP-11 35х1 1/4"W: 35 x 1¼” BSP (M) HYD-SS-MP-12 42х1 1/2"W: 42 x 1½” BSP (M) HYD-SS-MP-13 54х2"W: 54 x 2” BSP (M). Female threaded coupler: HYD-SS-FC-01 S15х1/2"N: 15 x ½” BSP (F) HYD-SS-FC-02 S18х1/2"N: 18 x ½” BSP (F) HYD-SS-FC-03 S18х3/4"N: 18 x ¾” BSP (F) HYD-SS-FC-04 S22х1/2"N: 22 x ½” BSP (F) HYD-SS-FC-05 S22х3/4"N: 22 x ¾” BSP (F) HYD-SS-FC-06 S28х3/4"N: 28 x ¾” BSP (F) HYD-SS-FC-07 S28х1"N: 28 x 1” BSP (F) HYD-SS-FC-08 S35x1"N: 35 x 1” BSP (F) HYD-SS-FC-09 S35x1 1/4"N: 35 x 1¼” BSP (F) HYD-SS-FC-10 S42х1 1/2"N: 42 x 1½” BSP (F) HYD-SS-FC-11 S54х2"N: 54 x 2” BSP (F). Female threaded coupler with straight pipe: HYD-SS-FP-01 15х1/2"N: 15 x ½” BSP (F) HYD-SS-FP-02 15x3/4"N: 15 x ¾” BSP (F) HYD-SS-FP-03 18х1/2"N: 18 x ½” BSP (F) HYD-SS-FP-04 18х3/4"N: 18 x ¾” BSP (F) HYD-SS-FP-05 18x1"N: 18 x 1” BSP (F) HYD-SS-FP-06 22х1/2"N: 22 x ½” BSP (F) HYD-SS-FP-07 22х3/4"N: 22 x ¾” BSP (F) HYD-SS-FP-08 22x1"N: 22 x 1” BSP (F) HYD-SS-FP-09 28х3/4"N: 28 x ¾” BSP (F) HYD-SS-FP-10 28х1"N: 28 x 1” BSP (F) HYD-SS-FP-11 35х1 1/4"N: 35 x 1¼” BSP (F) HYD-SS-FP-12 42х1 1/2"N: 42 x 1½” BSP (F) HYD-SS-FP-13 54х2"N: 54 x 2” BSP (F). Coupler: HYD-SS-CP-01 S15: 15 x 15mm HYD-SS-CP-02 S18х15: 18 x 15mm HYD-SS-CP-03 S18: 18 x 18mm HYD-SS-CP-04 S22х18: 22 x 18mm HYD-SS-CP-05 S22х15: 22 x 15mm HYD-SS-CP-06 S22: 22 x 22mm HYD-SS-CP-07 S28х15: 28 x 15mm HYD-SS-CP-08 S28х22: 28 x 22mm HYD-SS-CP-09 S28: 28 x 28mm HYD-SS-CP-10 S35х28: 35 x 28mm HYD-SS-CP-11 S35: 35 x 35mm HYD-SS-CP-12 S42х35: 42 x 35mm HYD-SS-CP-13 S42: 42 x 42mm HYD-SS-CP-14 S54х42: 54 x 42mm HYD-SS-CP-15 S54: 54 x 54mm. Coupler with straight pipe: HYD-SS-SP-01 S18х15Ⅱ: 18 x 15mm HYD-SS-SP-02 S22х15Ⅱ: 22 x 15mm HYD-SS-SP-03 S22х18Ⅱ: 22 x 18mm HYD-SS-SP-04 S28х15Ⅱ: 28 x 15mm HYD-SS-SP-05 S28х18Ⅱ: 28 x 18mm HYD-SS-SP-06 S28х22Ⅱ: 28 x 22mm HYD-SS-SP-07 S35х15Ⅱ: 35 x 15mm HYD-SS-SP-08 S35х18Ⅱ: 35 x 18mm HYD-SS-SP-09 S35х22Ⅱ: 35 x 22mm HYD-SS-SP-10 S35х28Ⅱ: 35 x 28mm HYD-SS-SP-11 S42х22Ⅱ: 42 x 22mm HYD-SS-SP-12 S42х28Ⅱ: 42 x 28mm HYD-SS-SP-13 S42х35Ⅱ: 42 x 35mm HYD-SS-SP-14 S54х28Ⅱ: 54 x 28mm HYD-SS-SP-15 S54х35Ⅱ: 54 x 35mm HYD-SS-SP-16 S54х42Ⅱ: 54 x 42mm. Adjustable connector: HYD-SS-AC-01 S15Ⅱ: 15 x 15mm HYD-SS-AC-02 S18Ⅱ: 18 x 18mm HYD-SS-AC-03 S22Ⅱ: 22 x 22mm HYD-SS-AC-04 S28Ⅱ: 28 x 28mm HYD-SS-AC-05 S35Ⅱ: 35 x 35mm HYD-SS-AC-06 S42Ⅱ: 42 x 42mm HYD-SS-AC-07 S54Ⅱ: 54 x 54mm. Union: HYD-SS-UN-01 H15х1/2": 15 x ½” captive nut HYD-SS-UN-02 H15х3/4": 15 x ¾” captive nut HYD-SS-UN-03 H18х1/2": 18 x ½” captive nut HYD-SS-UN-04 H18х3/4": 18 x ¾” captive nut HYD-SS-UN-05 H22х1/2": 22 x ½” captive nut HYD-SS-UN-06 H22х3/4": 22 x ¾” captive nut HYD-SS-UN-07 H28х3/4": 28 x ¾” captive nut HYD-SS-UN-08 H28х1": 28 x 1” captive nut HYD-SS-UN-09 H35x1": 35 x 1” captive nut HYD-SS-UN-10 H35x1 1/4": 35 x 1¼” captive nut HYD-SS-UN-11 H42х1 1/2": 42 x 1½” captive nut HYD-SS-UN-12 H54х2": 54 x 2” captive nut Tee: HYD-SS-TE-01 T15: 15 x 15 x 15mm HYD-SS-TE-02 T18х15х18: 18 x 15 x 18mm HYD-SS-TE-03 T18: 18 x 18 x 18mm HYD-SS-TE-04 T22х18х22: 22 x 18 x 22mm HYD-SS-TE-05 T22х15х22: 22 x 15 x 22mm HYD-SS-TE-06 T22: 22 x 22 x 22mm HYD-SS-TE-07 T28x15x28: 28 x 15 x 28mm HYD-SS-TE-08 T28х22х22: 28 x 22 x 22mm HYD-SS-TE-09 T28x22x28: 28 x 22 x 28mm HYD-SS-TE-10 T28: 28 x 28 x 28mm HYD-SS-TE-11 T35x15x35: 35 x 15 x 35mm HYD-SS-TE-12 T35x22x35: 35 x 22 x 35mm HYD-SS-TE-13 T35x28x35: 35 x 28 x 35mm HYD-SS-TE-14 T35: 35 x 35 x 35mm HYD-SS-TE-15 T42х35х42: 42 x 35 x 42mm HYD-SS-TE-16 T42: 42 x 42 x 42mm HYD-SS-TE-17 T54х42х54: 54 x 42 x 54mm HYD-SS-TE-18 T54: 54 x 54 x 54mm. Female threaded Tee: HYD-SS-FT-01 T15х1/2"Nx15: 15 x ½” BSP (F) x 15mm HYD-SS-FT-02 T18х1/2"Nx18: 18 x ½” BSP (F) x 18mm HYD-SS-FT-03 T18х3/4"Nx18: 18 x ¾” BSP (F) x 18mm HYD-SS-FT-04 T22х1/2"Nx22: 22 x ½” BSP (F) x 22mm HYD-SS-FT-05 T22х3/4"Nx22: 22 x ¾” BSP (F) x 22mm HYD-SS-FT-06 T28х1/2"Nx28: 28 x ½” BSP (F) x 28mm HYD-SS-FT-07 T28х3/4"Nx28: 28 x ¾” BSP (F) x 28mm HYD-SS-FT-08 T28х1"Nx28: 28 x 1” BSP (F) x 28mm HYD-SS-FT-09 T35х1"Nx35: 35 x 1” BSP (F) x 35mm HYD-SS-FT-10 T35х1 1/4"Nx35: 35 x 1¼” BSP (F) x 35mm HYD-SS-FT-11 T42х1 1/2"Nх42: 42 x 1½” BSP (F) x 42mm HYD-SS-FT-12 T54х2"Nх54: 54 x 2” BSP (F) x 54mm. Male threaded Tee: HYD-SS-MT-01 T15х1/2"Wx15: 15 x ½” BSP (M) x 15mm HYD-SS-MT-02 T18х1/2"Wx18: 18 x ½” BSP (M) x 18mm HYD-SS-MT-03 T18х3/4"Wx18: 18 x ¾” BSP (M) x 18mm HYD-SS-MT-04 T22х1/2"Wx22: 22 x ½” BSP (M) x 22mm HYD-SS-MT-05 T22х3/4"Wx22: 22 x ¾” BSP (M) x 22mm HYD-SS-MT-06 T28х1/2"Wx28: 28 x ½” BSP (M) x 28mm HYD-SS-MT-07 T28х3/4"Wx28: 28 x ¾” BSP (M) x 28mm HYD-SS-MT-08 T28х1"Wx28: 28 x 1” BSP (M) x 28mm HYD-SS-MT-09 T35х1"Wx35: 35 x 1” BSP (M) x 35mm HYD-SS-MT-10 T35х1 1/4"Wx35: 35 x 1¼” BSP (M) x 35mm HYD-SS-MT-11 T42х1 1/2"Wх42: 35 x 1½” BSP (M) x 35mm HYD-SS-MT-12 T54х2"Wх54: 54 x 2” BSP (M) x 54mm. 90°B Elbow: HYD-SS-BE-01 L15a: 15 x 15mm HYD-SS-BE-02 L18а: 18 x 18mm HYD-SS-BE-03 L22a: 22 x 22mm HYD-SS-BE-04 L28a: 28 x 28mm HYD-SS-BE-05 L35a: 35 x 35mm HYD-SS-BE-06 L42а: 42 x 42mm HYD-SS-BE-07 L54а: 54 x 54mm. 90°A Elbow: HYD-SS-AE-01 L15: 15 x 15mm, HYD-SS-AE-02 L18: 18 x 18mm HYD-SS-AE-03 L22: 22 x 22mm HYD-SS-AE-04 L28: 28 x 28mm HYD-SS-AE-05 L35: 35 x 35mm HYD-SS-AE-06 L42: 42 x 42mm HYD-SS-AE-07 L54: 54 x 54mm. Female threaded elbow: HYD-SS-FE-01 L15х1/2"N: 15 x ½” BSP (F) HYD-SS-FE-02 L18х1/2"N: 18 x ½” BSP (F) HYD-SS-FE-03 L18х3/4"N: 18 x ¾” BSP (F) HYD-SS-FE-04 L22х1/2"N: 22 x ½” BSP (F) HYD-SS-FE-05 L22х3/4"N: 22 x ¾” BSP (F) HYD-SS-FE-06 L28х3/4"N: 28 x ¾” BSP (F) HYD-SS-FE-07 L35х1"N: 35 x 1” BSP (F). Male threaded elbow: HYD-SS-ME-01 L15x1/2"W: 15 x ½” BSP (M) HYD-SS-ME-02 L18х1/2"W: 18 x ½” BSP (M) HYD-SS-ME-03 L18х3/4"W: 18 x ¾” BSP (M) HYD-SS-ME-04 L22x1/2"W: 22 x ½” BSP (M) HYD-SS-ME-05 L22x3/4"W: 22 x ¾” BSP (M) HYD-SS-ME-06 L28x3/4"W: 28 x ¾” BSP (M) HYD-SS-ME-07 L35x1"W: 35 x 1” BSP (M). Female threaded elbow with base: HYD-SS-FB-01 L15х1/2"N(a): 15 x ½” BSP (F) HYD-SS-FB-02 L18х1/2"N(a): 18 x ½” BSP (F) HYD-SS-FB-03 L22х1/2"N(a): 22 x ½” BSP (F) HYD-SS-FB-04 L22х3/4"N(a): 22 x ¾” BSP (F). 45°B Elbow: HYD-SS-OBE-01 45°L15a: 15 x 15mm HYD-SS-OBE-02 45°L18а: 18 x 18mm HYD-SS-OBE-03 45°L22a: 22 x 22mm HYD-SS-OBE-04 45°L28a: 28 x 28mm HYD-SS-OBE-05 45°L35a: 35 x 35mm HYD-SS-OBE-06 45°L42а: 42 x 42mm HYD-SS-OBE-07 45°L54а: 54 x 54mm. 45°A Elbow: HYD-SS-OAE-01 45°L15: 15 x 15mm HYD-SS-OAE-02 45°L18: 18 x 18mm HYD-SS-OAE-03 45°L22: 22 x 22mm HYD-SS-OAE-04 45°L28: 28 x 28mm HYD-SS-OAE-05 45°L35: 35 x 35mm HYD-SS-OAE-06 45°L42: 42 x 42mm HYD-SS-OAE-07 45°L54: 54 x 54mm One end pipe bridge: HYD-SS-PCO-01 Ω15a: 15 x 15mm HYD-SS-PCO-02 Ω18a: 18 x 18mm HYD-SS-PCO-03 Ω22a: 22 x 22mm Pipe Bridge: HYD-SS-FCO-01 Ω15: 15 x 15mm HYD-SS-FCO-02 Ω18: 18 x 18mm HYD-SS-FCO-03 Ω22: 22 x 22mm HYD-SS-FCO-04 Ω28: 28 x 28mm. Cap: HYD-SS-CAP-01 D15: 15 x 15mm HYD-SS-CAP-02 D18: 18 x 18mm HYD-SS-CAP-03 D22: 22 x 22mm HYD-SS-CAP-04 D28: 28 x 28mm HYD-SS-CAP-05 D35: 35 x 35mm HYD-SS-CAP-06 D42: 42 x 42mm HYD-SS-CAP-07 D54: 54 x 54mm Pipe: HYD-SS-PI-15 15mm HYD-SS-PI-22 22mm HYD-SS-PI-28 28mm HYD-SS-PI-35 35mm HYD-SS-PI-42 42mm HYD-SS-PI-54 54mm

Approval Holder:

Merchant Supplies Distribution Ltd

Company Name

Merchant Supplies Distribution Ltd

Address

Unit 2 Merlin Centre Acrewood Way St. Albans

Postcode

AL4 OJY

Phone

0203 915 2557

General Email

murat@gfsflex.com

View All Listings by this Company

Range of compression fittings with brass, chrome plated brass bodies. COM RANGE OF COM For use with copper pipe (EN 1057) Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604024

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

8MM – 54MM & ¼” – 2”

Marking:

Lawton & size on compression nut.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Bent Tap Connector Compression COMBTC0151/2 – 15mm x ½” Coupling Compression Chrome COMCP015CP – 15mm COMCP022CP – 22mm COMCP028CP – 28mm COMCP035CP – 35mm COMCP042CP – 42mm COMCP054CP – 54mm Coupling Compression COMCP008 – 08mm COMCP010 – 10mm COMCP015 – 15mm COMCP022 – 22mm COMCP028 – 28mm COMCP035 – 35mm COMCP042 – 42mm COMCP054 – 54mm Reducer Coupler COMCP01008 – 10mm x 08mm COMCP01508 – 15mm x 08mm COMCP01510 – 15mm x 10mm COMCP01512 – 15mm x 12mm COMCP02215 – 22mm x 15mm COMCP02815 – 28mm x 15mm COMCP02822 – 28mm x 22mm COMCP03522 – 35mm x 22mm COMCP03528 – 35mm x 28mm 90 Degree Elbow Compression COMEL008 – 08mm COMEL010 – 10mm COMEL015 – 15mm COMEL022 – 22mm COMEL028 – 28mm COMEL035 – 35mm COMEL042 – 42mm COMEL054 – 54mm 45 Degree Elbow Compression COMEL01545 – 15mm COMEL02245 – 22mm COMEL02845 – 28mm 90 Degree Elbow Compression Chrome COMEL015CP – 15mm COMEL022CP – 22mm COMEL028CP – 28mm COMEL035CP – 35mm COMEL042CP – 42mm COMEL054CP – 54mm Equal Tee Compression COMTE008 – 08mm COMTE010 – 10mm COMTE015 – 15mm COMTE022 – 22mm COMTE028 – 28mm COMTE035 – 35mm COMTE042 – 42mm COMTE054 – 54mm Equal Tee Compression Chrome COMTE015CP – 15mm COMTE022CP – 22mm COMTE028CP – 28mm COMTE035CP – 35mm COMTE042CP – 42mm COMTE054CP – 54mm Cross Tee Compression COMCR015 – 15mm COMCR022 – 22mm COMCR028 – 28mm Male Iron Coupling Compression COMCPMI0081/4 – 08mm x ¼” COMCPMI0101/4 – 10mm x ¼” COMCPMI0103/8 – 10mm x 3/8” COMCPMI0151/4 – 15mm x ¼” COMCPMI0153/8 – 15mm x 3/8” COMCPMI0151/2 – 15mm x ½” COMCPMI0153/4 – 15mm x ¾” COMCPMI0221/2 – 22mm x ½” COMCPMI0223/4 – 22mm x ¾” COMCPMI0221 – 22mm x 1 “ COMCPMI0283/4 – 28mm x ¾” COMCPMI0281 – 28mm x 1” COMCPMI03511/4 – 35mm x 1 ¼” COMCPMI04211/2 – 42mm x 1 ½” COMCPMI0542 – 54mm x 2” Male Iron Coupling Chrome Compression COMCPMI0151/2CP – 15mm x ½” COMCPMI0223/4CP – 22mm x ¾” Female Iron Coupling Compression COMCPFI0101/4 – 10mm x ¼” COMCPFI0151/4 – 15mm x ¼” COMCPFI051/2 – 15mm x ½” COMCPFI0153/4 – 15mm x ¾” COMCPFI0221/2 – 22mm x ½” COMCPFI0223/4 – 22mm x ¾” COMCPFI0221 – 22mm x 1 “ COMCPFI0281 – 28mm x 1” COMCPFI03511/4 – 35mm x 1 ¼” COMCPFI04211/2 – 42mm x 1 ½” COMCPFI0542 – 54mm x 2” Female Iron Coupling Chrome Compression COMCPFI0151/2CP – 15mm x ½” COMCPFI0223/4CP – 22mm x ¾” Female Iron Elbow Chrome Compression COMELFI0151/2CP – 15mm x ½” COMELFI0223/4CP – 22mm ¾” COMELFI0221CP – 22mm x 1” Male Iron Elbow Compression COMELMI0151/2 – 15mm x ½” COMELMI0153/4 – 15mm x ¾” COMELMI0223/4 – 22mm x ¾” COMELMI0281 – 28mm x 1” COMELMI03511/4 – 35mm x 1 ¼” Female Iron Elbow Compression COMELFI0151/2 – 15mm x ½” COMELFI0153/4 – 15mm x ¾” COMELFI0221/2 – 22mm x ½” COMELFI0223/4 – 22mm x ¾” COMELFI0221 – 22mm 1 “ COMELFI0281 – 28mm x 1” COMELFI03511/4 – 35mm x 1 ¼” COMELFI04211/2 – 42mm x 1 ½” COMELFI0542 – 54mm x 2” Male Iron Elbow Chrome Compression COMELMI0151/2CP – 15mm x ½” COMELMI0223/4CP – 22mm x ¾” Wallplate Elbow Compression COMELWL0151/2 – 15mm x ½” COMELWL0223/4 – 22mm x ¾” Wallplate Elbow Chrome Compression COMELWL0151/2CP – 15mm x ½” Male Iron Coupler Taper Thread COMTTCPMI0151/2 – 15mm x ½” COMTTCPMI0223/4 – 22mm x ¾” COMTTCPMI0281 – 28mm x 1” Male Coupler Ext Taper Thread COMETTCPMI0223/4 – 22mm x ¾” Crossover Compression COMC022 – 22mm End Cap Compression COMEC008 – 08mm COMEC010 – 10mm COMEC015 – 15mm COMEC022 – 22mm COMEC028 – 28mm COMEC035 – 35mm COMEC042 – 42mm COMEC054 – 54mm End Cap Compression Chrome Plated COMEC015CP – 15mm COMEC022CP – 22mm COMEC028CP – 28mm COMEC035CP – 35mm COMEC042CP – 42mm COMEC054CP – 54mm Red Tee Compression COMTE0151522 – 15mm x 15mm x 22mm COMTE0221515 – 22mm x 15mm x 15mm COMTE0221522 – 22mm x 15mm x 22mm COMTE0222215 – 22mm x 22mm x 15mm COMTE0281528 – 28mm x 15mm x 28mm COMTE0282228 – 28mm x 22mm x 28mm COMTE0282815 – 28mm x 28mm x 15mm COMTE0282822 – 28mm x 28mm x 22mm Female Tee Compression COMTEFI015151/2 – 15mm x 15mm x ½” COMTEFI022221/2 – 22mm x 22mm x ½” COMTEFI022223/4 – 22mm x 22mm x ¾” COMTEFI028281 – 28mm x 28mm x 1” Red Tee Chrome Compression COMTE0151522CP – 15mm x 15mm x 22mm COMTE0221515CP – 22mm x 15mm x 15mm COMTE0222215CP – 22mm x 22mm x 15mm COMTE0222228CP – 22mm x 22mm x 28mm Reducing Sets Compression COMRS0108 – 10mm x 08mm COMRS0158 – 15mm x 08mm COMRS01510 – 15mm x 10mm COMRS02215 – 22mm x 15mm COMRS02822 – 28mm x 22mm COMRS03515 – 35mm x 15mm COMRS03522 – 35mm x 22mm COMRS03528 – 35mm x 28mm COMRS04215 – 42mm x 15mm COMRS04222 – 42mm x 22mm COMRS04228 – 42mm x 28mm COMRS04235 – 42mm x 35mm COMRS05422 – 54mm x 22mm COMRS05428 – 54mm x 28mm COMRS05435 – 54mm x 35mm COMRS05442 – 54mm x 42mm Tank Connector Compression COMTC015 – 15mm COMTC022 – 22mm COMTC028 – 28mm COMTC035 – 35mm COMTC042 – 42mm COMTC054 – 54mm Repair Coupling Compression COMRCP015 – 15mm COMRCP022 – 22mm Straight Tap Connect Compression COMSTC0151/2 – 15mm x ½” COMSTC0153/4 – 15mm x ¾” Red Elbow Compression COMREL02215 – 22mm x 15mm

Approval Holder:

The Lawton Tube Company Ltd.

Company Name

The Lawton Tube Company Ltd.

Address

Torrington Avenue, Coventry

Postcode

CV4 9AB

Country

United Kingdom

Phone

+44 24 7646 6203 or 024 7646 6203

General Email

mlis@lawtontubes.co.uk

View All Listings by this Company

Range of brass press fittings for use with copper pipe (manufactured to EN1057:2006 and +A1:2010 Seamless round copper tube, R250 half hard). Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250804708

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

Flowflex logo and size on body.

Installation Requirements:

R001

Expiry date:

31/08/2030

Model:

Male Adaptor: 572210 - 15X1/2B 572211 - 22X3/4B 572212 - 28X1B 572213 - 35X1.1/4B 572214 - 42X1.1/2B 572215 - 54X2B Female Adaptor: 572216 - 15X1/2B 572217 - 22X3/4B 572218 - 28X1B 572219 - 35X1.1/4B 572220 - 42X1.1/2B 572221 - 54X2B Wallplate Elbow: 572222 - 15x½B.

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Manufacturer:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

Manufacturer:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

‘AF’ range of compression fittings with brass or chrome plated brass bodies for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum working temperature 85˚C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2204110

Size:

see model

Marking:

Plumb Bliss logo (PB), Size & month/year of manufacture on fitting body

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

10.1272 Plumb Bliss Compression Coupler Male 15mm x 1/2" 10.1273 Plumb Bliss Compression Coupler Male 15mm x 3/4" 10.1274 Plumb Bliss Compression Coupler Male 22mm x 1/2" 10.1275 Plumb Bliss Compression Coupler Male 22mm x 3/4" 10.1276 Plumb Bliss Compression Coupler Female 15mm x 1/2" 10.1277 Plumb Bliss Compression Coupler Male 15mm x 3/4" 10.1278 Plumb Bliss Compression Coupler Male 22mm x 1/2" 10.1279 Plumb Bliss Compression Coupler Male 22mm x 3/4" 10.1280 Plumb Bliss Brass Compression Tee 15mm x 15mm x 1/2" 10.1281 Plumb Bliss Wall Plate Compression Elbow 15mm x 1/2"

Approval Holder:

Bliss UK Group Ltd

Company Name

Bliss UK Group Ltd

Address

Unit 4A Kinsbourne Farm Wick End Stagsden Bedfordshire

Postcode

MK43 8TS

Country

United Kingdom

Phone

01234 860230

General Email

accounts@blissukgroup.co.uk

View All Listings by this Company

Range of WC dual flush drop valves with ABS bodies and silicone seals. The valves are operated via a two push button assembly for either full or reduced flush and incorporate an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2311107

Size:

2” BSP (M)

Marking:

Plumb Bliss, logo & company website on bottom. WRAS & technical data on side.

Installation Requirements:

R001 R571 R580 R581

Expiry date:

30/11/2028

Model:

10.1260

Approval Holder:

Bliss UK Group Ltd

Company Name

Bliss UK Group Ltd

Address

Unit 4A Kinsbourne Farm Wick End Stagsden Bedfordshire

Postcode

MK43 8TS

Country

United Kingdom

Phone

01234 860230

General Email

accounts@blissukgroup.co.uk

View All Listings by this Company

Range of urinal autosyphons with plastic body and supplied with plastic backnuts.

Section:

1307 Flushing Mechanisms

Section Subtitle:

Urinals.

WRAS Approval Number:

250801701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

B.B.S Auto Syphon, BS 1876 tested & Masefield Beta Ltd. on outer body

Installation Requirements:

R001

Expiry date:

31/08/2030

Model:

BBS Auto Syphon range consisting of; Size 1 - 4.5 litre (1 Gallon): 5½’’ X 1” BSP outlet. 5½’’ X 1¼” BSP outlet. Size 2 - 9 litre (2 Gallon): 6¼’’ X 1” BSP outlet. 6¼’’ X 1¼” BSP outlet. Size 3 - 13.5 litre (3 Gallon): 7½’’ X 1” BSP outlet. 7½’’ X 1¼” BSP outlet. Size 4 - 18 litre (4 Gallon): 8¼’’ X 1” BSP outlet. 8¼’’ X 1¼” BSP outlet. Size 5 - 22.5 litre (5 gallon): 9¼’’ X 1” BSP outlet. 9¼’’ X 1¼” BSP outlet.

Approval Holder:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Manufacturer:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Range of SSM-AQUO ultrasonic water meters with brass bodies, the inlets incorporate a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperature 60°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/4” BSP (M) 7/8” BSP (M) 1” BSP (M) 1-1/4” BSP (M) 1-1/2” BSP (M) 2” BSP (M)

Marking:

Pietro Fiorentini logo moulded on cap. Pietro Fiorentini logo, pressure, flow, year of manufacture (YYYY) and other technical information printed on meter face. Flow arrow and DN moulded on body.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

SSM-AQUO DN15 - DN40

Approval Holder:

Pietro Fiorentini S.p.A.

Company Name

Pietro Fiorentini S.p.A.

Address

Via E. Fermi, n. 8/10-36057 Arcugnano (VI).

Country

Italy

General Email

mario.petti@fiorentini.com

View All Listings by this Company

Range of pilot operated base valves, main body only, with epoxy coated ductile iron bodies and stainless-steel plugs. Maximum working pressure IDROMEMBRANA 16.0 & HYDROMODUL 25.0 Bar Maximum operating temperature IDROMEMBRANA 50.0°C and HYDROMODUL 80.0°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300 Flanged

Marking:

Technidro, DN, PN and model name on adhesive label on body. Flow arrow on body

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

IDROMEMBRANA HYDROMODUL

’TP Series 300’ and ‘TPE Series 300’ ranges of single stage in-line pumps with black coloured cataphoretic electro deposition coated cast iron or ductile iron bodies and bronze, stainless-steel or black coloured cataphoretic electro deposition coated cast iron impellers. Pumps are available with BQQE or BBQE shaft seals. Maximum working pressure 16.0 bar. Maximum operating temperature 60°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250607701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN32 - DN350 Flanged connections.

Marking:

Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, type, model, PN-SN no., technical info and manufacturing country on data plate on motor stool.

Installation Requirements:

R001 R415

Expiry date:

30/06/2030

Model:

TP series 300: TP(E) XX-XXX/X [Blank] or S or NC - X or BX - F - A or B or S or O or Y or Q - XXXX * Where: TP = pump type with normal Asynchronous motor. TPE = pump type with E-motor (motor with integrated frequency driver). XX = nominal diameter of inlet and outlet ports, DN (32-350). XXX = maximum head [dm] (60-1050). /X = pole number (2, 4, 6). [Blank] or S or NC = Sensor options: [Blank] = without sensor, S = TPE with factory-fitted differential-pressure sensor, NC = TPE with Siemens/Nidec motor with integrated CUE (Grundfos brand of VSD). X or BX = B: Oversize motor, X: Special version. F = DIN flange. A or B or S or O or Y or Q = A: Basic version - Cast iron pump housing and impeller, B: Cast iron pump housing with bronze impeller, S: Cast iron pump housing with stainless steel impeller, O: Ductile cast iron pump housing with cast iron impeller, Y: Ductile cast iron pump housing with bronze impeller, Q = Ductile cast iron pump housing with stainless steel impeller. XXXX = shaft seal: BQQE or BBQE. * = Motor information, does not have any bearing on water contact parts.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241002724

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

CWMA3 & CWMA5 : 1” BSP (F) inlet x 1” BSP (F) outlet. CWMA7 : 1¼” BSP (F) inlet x 1” BSP (F) outlet. CWMA9 : 1½” BSP (F) inlet x 1¼” BSP (F) outlet. CWMA18 : 2” BSP (F) inlet x 1½” BSP (F) outlet.

Marking:

Winflo logo, model code and product technical information on data-plate.

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

CMWA range model code: CMWAXX-Y(T) CMWA = Pump type. XX = Nominal flow rate m/3 per hour (3, 5, 7, 9 or 18). Y = Number of impellers. T = 3 phase or (blank) = single phase. CMWA3-2, CMWA3-3, CMWA3-4, CMWA3-5, CMWA3-6 & CMWA3-7. CMWA5-2, CMWA5-3, CMWA5-4, CMWA5-5, CMWA5-6 & CMWA5-7. CMWA7-2, CMWA7-3, CMWA7-4, CMWA7-5 & CMWA7-6. CMWA9-2, CMWA9-3, CMWA9-4 & CMWA9-5. CMWA3-2T, CMWA3-3T, CMWA3-4T, CMWA3-5T, CMWA3-6T & CMWA3-7T. CMWA5-2T, CMWA5-3T, CMWA5-4T, CMWA5-5T, CMWA5-6T & CMWA5-7T. CMWA7-2T, CMWA7-3T, CMWA7-4T, CMWA7-5T, CMWA7-6T & CMWA7-7T. CMWA9-2T, CMWA9-3T, CMWA9-4T & CMWA9-5T. CMWA18-2T, CMWA18-3T & CMWA18-4T.

Approval Holder:

Eautechnik GmbH

Company Name

Eautechnik GmbH

Country

Germany

View All Listings by this Company

Range of shower booster pumps (either single or double) with acetal bodies and impellers and EPDM seals and NBR `O` rings. Supplied with stainless-steel braided EPDM lined flexible hoses incorporating isolation valves Maximum operating pressure 3.8 bar. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250304731

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm pushfit

Marking:

Bristan and product info on label

Installation Requirements:

R001 R415

Expiry date:

31/03/2030

Model:

Maximum working pressure 3.8 bar: ST PUMP15TN / 232650 ST PUMP20TN / 232653 ST PUMP20SG / 232651

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of overhead shower outlets with stainless steel bodies (various finishes). The inlet incorporates a stainless-steel filter and a plastic flow regulator. Maximum working temperature 45°C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250608015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

Dolphin Solutions Ltd logo on the body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

DB3001.a.bbb Dolphin blue round shower head DB3002.a.bbb Dolphin blue square shower head Where: The suffix .a in the above codes will be a number 1 - 9 to denote the finish: .1 to denote brushed/satin polished. .2 to denote mirror polished. .3 to denote brushed/satin polished with PVD coating. .4 to denote mirror polished with PVD coating. .5 to denote powder coated. .6 - 9 to denote other material and finish options. The suffix .bbb in the above code indicates the colour of the PVD or powder coat. It can be either two or three digits from 01-999.

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

View All Listings by this Company

Shower handsets with plastic bodies and various finishes. Maximum operating temperature 60 °C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250612009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

PPI on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

H11013 & H12013.

Approval Holder:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company

Shower handset with a plastic body and Chrome finish Maximum operating temperature 60 °C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250612010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Deva on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

HANM13

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Range of ‘Y’-pattern strainers with blue epoxy coated ductile iron bodies and a stainless-steel screen. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Size:

DN50 - DN 300 flanged

Marking:

AEON logo DN, PN, year of manufacture and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

AW32 - Aeon Y-Strainers DN50 – DN300 Flanged

Approval Holder:

Radius Systems Limited

Company Name

Radius Systems Limited

Address

Radius House, Berristow Lane, South Normanton, Alfreton, Derbyshire

Postcode

DE55 2JJ

Country

United Kingdom

Phone

01773582303

View All Listings by this Company

Range of pillar taps ( brass body - various finishes, see), CR20 and CR20/501 incorporate a non-rising spindle headworks with a dome type operating member. GE02 and GE02/201 incorporating quarter turn ceramic discs headworks with a lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

250604014

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

DEVA & DTC 59 on body.

Installation Requirements:

R001 R006

Expiry date:

30/06/2030

Model:

CR20, CR20/501 (GOLD), GE02, GE02/501 (GOLD).

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Pillar taps with brass body chrome finish, incorporating quarter turn ceramic disc headwork with single lever operating members. The product is supplied with metal back-nuts. Maximum working pressure 10.0 bar. Maximum operating pressure 85°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

2105327

Size:

½” BSP (M)

Marking:

Nabis & Hampton on operating member.

Installation Requirements:

R001 R006

Expiry date:

31/05/2026

Model:

A05676

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company