Directory Search Results

Print List

#260304015

Range of stainless steel braided or nylon braided EPDM lined hose assemblies available with a variety of end connectors. Maximum operating pressure 10.0 bar. Maximum operating temperature 90°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
260304015
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model.
Marking:
FQR, last 2 digits of the year of production, DN and WRAS on ferrule.
Installation Requirements:
R001
Expiry date:
31/03/2031
Model:
DN6W : 8x1, 10x1, 11x1, 12x1 15x1, F3/8”, F1/2”, M3/8”, M1/2”, NPB15, 15c.o., F1/2” c/curva, FC1/2”, F3/8" c/curva P6W : 8x1, 10x1, 11x1, 12x1 15x1, F3/8”, F1/2”, M3/8”, M1/2”, NPB15, 15c.o., F1/2” c/curva, FC1/2”, F3/8" c/curva DN8W: 10x1, 11x1, 12x1, 15x1, F3/8”, F1/2”, F3/4”, M3/8”, M1/2”, NPB15, 15c.o., F1/2” c/curva, FC1/2”, F3/8" c/curva, F3/4" c/curva P9W: 10x1, 11x1, 12x1, 15x1, F3/8”, F1/2”, F3/4”, M3/8”, M1/2”, NPB15, 15c.o., F1/2” c/curva, FC1/2”, F3/8" c/curva, F3/4" c/curva DN10W: 12x1, F3/8”, F1/2”, F¾”, M3/8”, M1/2”, NPB15, 15c.o, F1/2” c/curva, FC1/2”, F3/8" c/curva, F3/4" c/curva DN13W: F1/2” F¾”, M1/2”, M3/4, F1/2” c/curva, F3/4" c/curva

Approval Holder:
F.Q.R. Frattini S.R.L.
Company Name
F.Q.R. Frattini S.R.L.
Address
Via Per Borgomanero 71 Briga Novarese (No)
Postcode
28010
Country
Italy
Phone
+39 0322 94100
General Email
fqr3@fqrfrattini.com

View All Listings by this Company

Print This Approval


#260302706

Range of “Tempest” Indirect and direct unvented storage cylinders consisting of factory fitted single or twin coil circuit with either a primary or solar coil. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar@90˚C. The product is supplied with an inlet control group (safety kit) consisting of a pressure reducing valve adjustable between 2.7 and 3.3 bar, strainer, an expansion relief valve set at 6.0 bar and a check valve cartridge (verified by test - suitable for backflow protection against Fluid Category 2). A tundish and expansion vessel are also provided. Maximum supply pressure to the inlet control group 10.0 bar. Maximum working pressures: Secondary circuit 3.0 bar, Primary Circuit 5.5 bar & Solar circuit 5.5 bar. Maximum operating temperature 70°C.

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
Telford logo & TEMPEST on body. D.O.M (DD.MM.YYYY), Serial number, Capacity, Max working temp, Max working pressure and other technical information on label on body
Installation Requirements:
R001
Expiry date:
31/03/2031
Model:
TSMDXXX Tempest Stainless Direct Direct Electric Only Unvented Hot Water Cylinder - 22mm TSMIXXX Tempest Stainless Indirect Indirect Unvented Hot Water Cylinder - 22mm TSMIXXXH Tempest Stainless Indirect Horizontal Indirect Horizontal Unvented Hot Water Cylinder - 22mm TSMIXXX/HP Tempest Stainless Indirect Heat Pump Indirect Unvented Hot Water Cylinder with coil suitable for Heat Pump - 22mm TSMIXXX/S Tempest Stainless Indirect Solar Thermal Indirect Unvented Hot Water Cylinder with additional coil suitable for Solar Thermal - 22mm TSMIXXX/HP Tempest Stainless Indirect Heat Pump 400-500L Indirect Unvented Hot Water Cylinder with coil suitable for Heat Pump 1 Inch (F) TSMIXXX/S Tempest Stainless Indirect Solar Thermal 400-500L Indirect Unvented Hot Water Cylinder with additional coil suitable for Solar Thermal - 1 Inch (F)

Approval Holder:
Telford Copper & Stainless Cylinders Ltd
Company Name
Telford Copper & Stainless Cylinders Ltd
Address
Unit 22 Furrows Business Park Haybridge Road
Postcode
TF1 2DF
Country
Wellington

View All Listings by this Company

Print This Approval


#260304704

Range of 2, 3 or 4 way manifolds with brass bodies and stop valves at each of the outlets. Maximum operating pressure 10 bar. Maximum operating temperature 85°C

Section:
1950 Manifolds
Section Subtitle:
Metal.
WRAS Approval Number:
260304704
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See below
Marking:
Savar Brass SRL and size on body
Installation Requirements:
R001
Expiry date:
31/03/2031
Model:
Manifolds ¾” x ½” BSP (F/M): 1102 W034 - 2 way, 1103 W034 - 3 way, 1104 W034 - 4way. Manifolds ¾” x ¾” BSP (F/M): 1202 W034 - 2 way, 1203 W034 - 3 way, 1204 W034 - 4 way. End Caps (for unused outlets): 1530 M034 – ¾” BSP (M), 1532 F034 – ¾” BSP (F).

Approval Holder:
Savar Brass Srl
Company Name
Savar Brass Srl
Address
Via Fratelli Capponi, 88-90 25068 Sarezzo (Bs) Italy

View All Listings by this Company

Print This Approval


#260308002

Range of wall mounted, concealed, manually operated blending valves, (brass bodies - various finish trim kits), incorporating ceramic cartridge headworks with single lever operating members. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
260308002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
BDM-MIX-C410-T1 - ½’’ BSP (F), BDM-MIX-C315-C410-T2 - ½” BSP (F).
Marking:
BAGNODESIGN on faceplate.
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2031
Model:
BDM-MIX-C410-T1 concealed rough for use with- BDM-CND-E410-XX Conrad trim set BDM-MEZ-E410-B-XX Mezzanine trim set BDM-MLP-E410-XX M-Line Diffusion trim set BDM-NAR-E410-CP Nara trim set BDM-VIT-E410-XX Vitesse trim set BDM-MIX-C315—C410-T2 concealed rough for use with – BDM-BIS-E410L-XX Bristol trim set BDM-CRL-E410-XX Carlyle trim set BDM-FTY-E410-XX Fonteyn trim set BDM-MLI-E410-XX M-Line trim set BDM-REV-E410-XX Revolution trim set BDM-TOK-E410-XX Toko trim set XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C).

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
Country
United Kingdom
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#260308008

Wall mounted, manually operated, blending valve (brass body - various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The inlets incorporate NBR washers with stainless steel mesh strainers. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
260308008
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M) x ½” BSP (M) offset union.
Marking:
Bagnodesign on body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2031
Model:
BDM-GIN-324-XX XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
Country
United Kingdom
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#260302017

Range of wall mounted, concealed thermostatic shower valves incorporating 2 way or 3 way function with push button headworks controlling the flow to either shower outlets. The temperature is controlled independently via a thermostatic cartridge. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
260302017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Must be installed in combination with Grohe Rapido SmartBox 35.600 or 35.5604
Size:
1/2" BSP (F) inlets and outlets
Marking:
Grohe Logo on faceplate
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2031
Model:
29.121.xxx (Thermostat for concealed installation with 3 valves) & 29.119.xxx (Thermostat for concealed installation with 2 valves Must be installed in combination with Grohe Rapido SmartBox 35.600 or 35.5604 Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite A00 – hard graphit DL0 – brushed warm sunset GN0 – brushed cool sunrise MG0 – satin graphite MS0 – satin steel GL0 – cool sunrise BE0 – polished nickel EN0 – brushed nickel

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#250603305

Section:
2010 Shower Valves
Description:
A Range of Shower valve(s) with thermostatic temperature control
Wall Mounted Concealed. Inlets incorporate approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R020
Expiry date:
30/06/2030
Model:
FRM SHCDIV C FRM SHCDIV BLK FRM SHCDIV GM FRM SHCDIV BB

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
FRM SHCDIV CCHROME15mm Compression5.0 bar85 °CBristanFaceplateNo1/4 Turn ceramic diskNot ApplicableNot Applicable
FRM SHCDIV BLKBLACK15mm Compression5.0 bar85 °CBristan FaceplateNo1/4 Turn ceramic diskNot ApplicableNot Applicable
FRM SHCDIV GMGUN METAL15mm Compression5.0 bar85 °CBristan FaceplateNo1/4 Turn ceramic diskNot ApplicableNot Applicable
FRM SHCDIV BBBRUSHED BRASS15mm Compression5.0 bar85 °CBristanFaceplateNo1/4 Turn ceramic diskNot ApplicableNot Applicable

Notes & Further Information

Model added February 2026: RP3 SAI SHCDIV C


Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#260302019

Range of wafer or lugged (see models) butterfly valves incorporating blue epoxy coated ductile iron bodies and discs, with Maximum working pressure: 16 Bar. Maximum operating temperature: 100 °C.

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
260302019
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN40 to DN300 Flange connections (see models).
Marking:
OMAL, model, body material and disc material on plate on body. DN and PN on body.
Installation Requirements:
R001
Expiry date:
31/03/2031
Model:
V8xxXM068 (DN40) V8xxXM069 (DN50) V8xxXM070 (DN65) V8xxXM071 (DN80) V8xxXM072 (DN100) V8xxXM073 (DN125) V8xxXM074 (DN150) V8xxXM075 (DN200) V8xxXM076 (DN250) V8xxXM077 (DN300) Where xx denotes lugged or wafer, and can be replaced with either of the following: 76 = Wafer, 86 = Lugged.

Approval Holder:
OMAL SPA SB
Company Name
OMAL SPA SB
Address
Via Ponte Nuovo, 11 – 25050 Rodengo Saiano – BS – Italy

View All Listings by this Company

Print This Approval


#260302704

Range of piston type float operated inlet valves with bronze bodies. The valves discharge from a downwards atmospheric discharge arrangement on the underside of the body. Maximum working pressure 10.0 Bar Cold water use only

Section:
2120 Valves
Section Subtitle:
Float operated, piston type.
WRAS Approval Number:
260302704
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Float not supplied Float size required: HC-10172-32 – 8” float HC-10172-40 - 10” float HC-10172-50 – 12” float HC-10172-65 – 12” float HC-10172-80 - 14” float HC-10172-100 - 14” float HC-10172-150 – 17” float
Size:
See models
Marking:
Home creator logo (HC) and size on body.
Installation Requirements:
R001
Expiry date:
31/03/2031
Model:
HC-10172-32 DN32(1 1/4”) HC-10172-40 DN40(1 1/2”) HC-10172-50 DN50(2”) HC-10172-65 DN65(2 ½”) HC-10172-80 DN80(3”) HC-10172-100 DN100(4”) HC-10172-150 DN150(6”)

Approval Holder:
HOME CREATOR GROUP LTD
Company Name
HOME CREATOR GROUP LTD
Address
167-169 GREAT PORTLAND STREET LONDON
Postcode
W1W 5PF
Country
United Kingdom

View All Listings by this Company

Print This Approval


#260312702

Range of piston type float operated inlet valves with brass bodies and backnuts. Maximum working pressure: size for 1/2”- 3/4” 10 bar, size for 1”- 2” 8 bar, size for 2-1/2”- 4” 6 bar. Cold water use only.

Section:
2120 Valves
Section Subtitle:
Float operated, piston type.
WRAS Approval Number:
260312702
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
No float supplied. To be used with floats complying with BS 2456
Size:
902-15 (1/2”) - 6” Float 902-20 (3/4”) - 6” Float 902-25 (1”) - 7” Float 902-32 (1-1/4”) - 11” Float 902-40 (1-1/2”) - 11” Float 902-50 (2”) - 12” Float 902-65 (2-1/2”) - 12” Float 902-80 (3”) - 14” Float 902-100 (4”) - 15” Float
Marking:
Ningbo Rian Valve Co.,Ltd logo, PN & size on body.
Installation Requirements:
R001 R554
Expiry date:
31/03/2031
Model:
902-15 1/2” BSP(M) 902-20 3/4” BSP(M) 902-25 1” BSP(M) 902-32 1-1/4”BSP(M) 902-40 1-1/2”BSP(M) 902-50 2”BSP(M) 902-65 2-1/2”BSP(M) 902-80 3”BSP(M) 902-100 4”BSP(M)

Approval Holder:
NINGBO RIAN VALVE CO.,LTD
Company Name
NINGBO RIAN VALVE CO.,LTD
Address
JISHAN XIDIAN TOWN NINGHAI COUNTY NINGBO CITY ZHEJIANG
Country
China
Phone
86-574-65179015
General Email
ellen@chinarian.com

View All Listings by this Company

Print This Approval


#260302029

Range of wall mounted concealed flow control valves (brass body with various finishes) incorporating, quarter turn ceramic disc headworks with single lever operating members. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C.

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
260302029
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
About water on operating member - 4402A763A, 4402A785A, 4402A787A. Fantini on operating member - 4402M685A and 4402M687A
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2031
Model:
44xxA763A 44xxA785A 44xxA787A 44xxM063A 44xxM585A 44xxM587A Where xx is replaced with the following to denote finish: 01 = Gold, 02 = Chrome, 13= matt black, 29= matt white, 38= polished stainless steel, 93 = Brushed stainless steel, 95= nickel PVD, P5 = matt gun metal PVD, P6= Matt British gold PVD, P9= Matt copper PVD, S1 = Deep black PVD, Q7= Pure brass PVD, Q8=raw metal PVD, 00= No finish. Bulit-in part 44xxA763A to be installed in combination with external part 27xxA763B Bulit-in part 44xxA785A to be installed in combination with external part 27xxA785B Bulit-in part 44xxA78A to be installed in combination with external part 27xxA787B Bulit-in part 44XXm063A to be installed in combination with external part 50xxE863B, 53XXR063B, 58XXL963B, 61XXV663B, 65XXS063SB, 67XXJ063B. Bulit-in part 44XXm585A to be installed in combination with external part 50xxG481b, 50xxg485b, 53xxr485b, 58xxl981b, 61xxv681b, 65xxs181sb, 67xxj085b. Bulit-in part 44XXm685A to be installed in combination with external part 50xxg481b, 50xxg482b, 53xxr485b, 58xxl981b, 61xxv681b, 65xxs181s, 67xxj085b Bulit-in part 44XXm587A to be installed in combination with external part, 50xxg483b, 50xxg489b, 53xxr487b, 58xxl989b, 61xxv689b, 65xxs189sb, 67xxj087b Bulit-in part 44XXm687A to be installed in combination with external part, 50xxg483b, 50xxg489b, 53xxr487b, 58xxl989b, 61xxv689b, 65xxs189sb, 67xxj087b

Approval Holder:
Fratelli Fantini Spa
Company Name
Fratelli Fantini Spa
Address
Via Buonarroti 4 28010 Pella Italy

View All Listings by this Company

Print This Approval


#260308703

Range of non-return valves with bronze bodies and discs. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:
2188 Valves
Section Subtitle:
Non-return, swing gate, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. Therefore, not considered suitable for Backflow Protection
WRAS Approval Number:
260308703
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model.
Marking:
Manufactures logo, DN, size, PN, material and flow arrow.
Installation Requirements:
R001
Expiry date:
31/03/2031
Model:
406F – 15: ½” BSP/NPT/BSPP, 406F – 20: ¾” BSP/NPT/BSPP, 406F – 25: 1” BSP/NPT/BSPP, 406F – 32: 1 ¼” BSP/NPT/BSPP, 406F – 40: 1 ½” BSP/NPT/BSPP, 406F – 50: 2” BSP/NPT/BSPP. 406S – 15: ½” solder connection, 406S – 20: ¾” solder connection, 406S – 25: 1” solder connection.

Approval Holder:
NINGBO RIAN VALVE CO.,LTD
Company Name
NINGBO RIAN VALVE CO.,LTD
Address
JISHAN XIDIAN TOWN NINGHAI COUNTY NINGBO CITY ZHEJIANG
Country
China
Phone
86-574-65179015
General Email
ellen@chinarian.com

View All Listings by this Company

Print This Approval


#260308704

Range of non-return valves with bronze bodies and discs. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:
2188 Valves
Section Subtitle:
Non-return, swing gate, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. Therefore, not considered suitable for Backflow Protection
WRAS Approval Number:
260308704
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN15 - DN50
Marking:
ALBION, PN, DN and Flow arrow on body. WRAS, ART388, MSS SP-80, BS 5154 & ALBION on data plate.
Installation Requirements:
R001
Expiry date:
31/03/2031
Model:
ART388

Approval Holder:
Albion Valves (UK) Limited
Company Name
Albion Valves (UK) Limited
Address
9a Fallbank Industrial Estate Dodworth Barnsley
Postcode
S75 3LS
Country
United Kingdom
Phone
01226 729900
General Email
samjed@albionvalvesuk.com

View All Listings by this Company

Print This Approval


#260308705

Range of non-return valves with bronze bodies and discs. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:
2188 Valves
Section Subtitle:
Non-return, swing gate, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. Therefore, not considered suitable for Backflow Protection
WRAS Approval Number:
260308705
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2", 3/4", 1", 1 1/4", 1 1/2" & 2"
Marking:
Crane, WRAS, PN on data plate. Size, flow arrow, CC491K on body.
Installation Requirements:
R001
Expiry date:
31/03/2031
Model:
D134W

Approval Holder:
Crane Ltd
Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Country
United Kingdom
Phone
01473 277 364
General Email
tturner@cranebsu.com

View All Listings by this Company

Print This Approval


#260312701

Adjustable, in-line pressure reducing valves with DZR brass bodies. Adjustable between 3.0 bar and 5.0 bar outlet pressure. Compression connections for use with copper pipe to EN1057. Maximum inlet supply pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
260312701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
22mm Compression.
Marking:
G. Bee GmbH logo (BEE), CR, flow arrow & model number on body.
Installation Requirements:
R001
Expiry date:
31/03/2031
Model:
BDR40475069.

Approval Holder:
G.Bee GmbH
Company Name
G.Bee GmbH
Address
Robert-Bosch-Straße 14, 71691 Freiberg am Neckar, Freiberg am Neckar
Country
Germany
Phone
+49 7141 9744-213
General Email
j.eisenkolb@g-bee.de

View All Listings by this Company

Print This Approval


#251202732

Range of in-line adjustable pressure reducing valves, with nickel plated DZR brass bodies and stainless-steel strainer. Various models are supplied with a pressure gauge (see model). Compression models are for use with BS EN1057 copper pipe. Maximum working pressure 16.0 Bar. Outlet pressure range: 0.8-6.0 bar. Maximum operating temperature 80°C.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
251202732
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See Models.
Marking:
'RBM logo on cap, & RBM, CR, flow arrow, size on body.
Installation Requirements:
R001
Expiry date:
31/12/2030
Model:
29090600(1” BSP (M) inlet/outlet (No Gauge)), 28481500 (15mm compression inlet/outlet (No Gauge)), 28481510(15mm compression inlet/outlet (With Gauge)), 28482200(22mm compression inlet/outlet (No Gauge)), 28482210(22mm compression inlet/outlet (With Gauge)), 28480400(¾” BSP (F) inlet/outlet (No Gauge)), 28480500 (½” BSP (F) inlet/outlet (No Gauge), 28482890(28mm compression inlet/outlet (No Gauge), 28482880(28mm compression inlet/outlet (With Gauge)), 29090600(1” BSP (M) inlet/outlet (No Gauge)), 29090700(1”1/4 BSP (M) inlet/outlet (With Gauge)), 29090800(1”1/2 BSP (M) inlet/outlet (No Gauge)) & 29090900(2” BSP (M) inlet/outlet (No Gauge)).

Approval Holder:
RBM S.p.a.
Company Name
RBM S.p.a.
Address
Componenti Per Impianti Idrotermici Via S. Giuseppe, 1 25075 Nave (Brescia)
Country
Italy

View All Listings by this Company

Print This Approval


#260304702

Range of pre-set, spring loaded, angled pressure relief valves (set at various pressure, see models), with plastic bodies. The valves are fitted with either rotary type easing gear or hand operated lifting gear. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
260304702
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
For non-wholesome water use only.
Size:
See models
Marking:
Caleffi logo, Caleffi Hydronic Solutions on body, pressure rating on cap.
Installation Requirements:
R001 R200
Expiry date:
31/03/2031
Model:
B312016 BSC - 3 Bar - 20.79mm manifold connection x 23.05mm spigot, B312024 BSC - 3 Bar - 20.81mm manifold connection x 23.09mm OD, B312494 CST - 3 Bar - 19.84mm manifold connection x ½” BSP (M), B312093 VIS - 3 Bar - 19.83mm manifold connection x 21.55mm spigot, B312090 CST - 3 Bar - 20.83mm manifold connection x ½” BSP (M), B312002 CST - 2.5 Bar - 20.84mm manifold connection x ½” BSP (M), B312414 CST - 3 Bar - 20.88mm manifold connection x ½” BSP (M), B312028 CST - 2.5 Bar - 23.44mm manifold connection x 18.03mm spigot, B312026 CST - 2.5 Bar - 20.83mm manifold connection x 24.93mm spigot, B312017 CST - 4 Bar - 20.82mm manifold connection x ½” BSP (M), B312027 VLL - 2.5 Bar - 20.81mm manifold connection x 24.91mm spigot, B312046 CST - 4 Bar - 20.94mm manifold connection x 25.19mm spigot.

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#260302714

Range of latching solenoid valves with DZR brass bodies, EPDM diaphragms and ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:
2230 Valves
Section Subtitle:
Solenoid, metal.
WRAS Approval Number:
260302714
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
EV229BW 10BE UN/132U2420: ⅜” BSP (F), EV229BW 10BE UN/132U2421: ½” BSP (F), EV229BW 20BE UN/132U2423: ¾” BSP (F), EV229BW 22BE UN/132U2424: 1” BSP (F).
Marking:
EV229BW 10BE models: Danfoss and flow arrow on body. Danfoss and product info on coil EV229BW 20BE & EV229BW 22BE models: Danfoss, product code and date of manufacture (WWYYD) on armature tube. Flow arrow on bottom of valve body. Danfoss and product info on coil.
Installation Requirements:
R001
Expiry date:
31/03/2031
Model:
EV229BW 10BE UN/132U2420 (EV229BW 10BE G12E UN000), EV229BW 10BE UN/132U2421 (EV229BW 10BE G38E UN000), EV229BW 20BE UN/132U2423 (EV229BW 20BE G34E UN000), EV229BW 22BE UN/132U2424 (EV229BW 22BE G1 UN000).

Approval Holder:
Danfoss A/S
Company Name
Danfoss A/S
Address
Nordborgvej 81 6430 Nordborg
Country
Denmark
Phone
+74 88 22 22
General Email
danfoss@danfoss.com

View All Listings by this Company

Print This Approval


#260302009

Range of spherical valves with brass bodies incorporating a chrome plated brass ball and a lockable operating mechanism. Maximum working pressure; 16 Bar Maximum operating temperature; 23°c

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
260302009
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See Models Below
Marking:
A.1, Size, Pressure and Lockvalve on body
Installation Requirements:
R001
Expiry date:
31/03/2031
Model:
1/2" BSP (F): SGMS201 3/4" BSP (F): SGMS202 1" BSP (F): SGMS203 1.1/4" BSP (F): SGMS204 1 1/2" BSP (F): SGMS205 2" BSP (F): SGMS206

Approval Holder:
EWAN ENGINEERING MANUFACTURING CO. (A.1jordan)
Company Name
EWAN ENGINEERING MANUFACTURING CO. (A.1jordan)
Address
JUWAIDEH INDUSTRIAL ZONE , JUTHAMAH AL-KENANI ST., AMMAN, JORDAN.

View All Listings by this Company

Print This Approval


#260308011

‘AQU Valves – LV16’ range of gate valves with DZR brass bodies and gate. The products incorporate a lockshield operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
260308011
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” - 2” BSP (F)X(F).
Marking:
AQU (brand of Burn Cable Management Systems SARL), size, body material, PN and size on body.
Installation Requirements:
R001
Expiry date:
31/03/2031
Model:
AQU Valves - LV16 range: 162050ALV200606 DN20, 162550ALV200808 DN25, 164050ALV201212 DN40, 165050ALV201616 DN50.

Approval Holder:
Burn Cable Management Systems SARL.
Company Name
Burn Cable Management Systems SARL.
Address
483 rue des Meuniers Artenay
Postcode
45410
Country
France
Phone
+33 635 60 1556
General Email
procurement@bcmsint.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 324 of 326

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.