Range of floor mounted, swivel, bath mixers (brass or stainless-steel bodies - variety of finishes (see models), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. The products also incorporate self-cancelling diverters to a shower handset. The diverter outlets incorporate an approved check valve cartridges, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure 5.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

2301073

Size:

½” BSP female.

Marking:

VOLA on operating member.

Installation Requirements:

R001 R010 R040

Expiry date:

31/01/2028

Model:

VOLA FS1-XX Brass VOLA FS1-XX Stainless Steel Model VOLA FS1-XX Brass and Stainless Steel are available with different surface finishes. Suffix “XX” indicate the number of surface finish and denotes: For Brass: 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, 62 = Deep Black, 63 = Copper, 65 = Gold, 68 = Nickel. For Stainless Steel: 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold.

Product Images

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Range of single hole, two single outlets (swivel) combination tap assemblies (brass bodies - various finishes). Incorporating ceramic cartridge headwork, single lever operating member controlling both flow and temperature to the spout and spring-loaded pull-down hose. The pull-down hose incorporates a hand spray with a self-closing trigger mechanism. The spout incorporates a ceramic disc headwork controlling the flow with a single lever operating member. The spout outlets incorporate plastic aerators. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

2211058

Size:

PEX lined flexible hose assemblies with stainless steel braiding with 1/2" B captive nut.

Marking:

Cooke & Lewis &date of manufacture MM/YYYY on body

Installation Requirements:

R001 R009 R010 R006

Expiry date:

30/11/2027

Model:

3663602930075 Chrome 3663602930082 Nickle Brushed 3663602930099 Black Paint

Product Images

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Range of combined bath filler and overflow waste assemblies incorporating a cable operated pop-up waste. The outlet incorporates a plastic flow straightener. Maximum operating temperature 60°C.

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

2209069

Note:

No testing performed on pop-up waste. Open outlet use only.

Size:

Stainless steel braided EPDM lined flexible hose assembly with ½” captive nut end connection.

Marking:

NK Porcelanosa on overflow cover.

Installation Requirements:

R001 R576

Expiry date:

30/09/2027

Model:

250023892-N790001469 length 55 cm – Chrome finishing

Approval Holder:

Noken Design S.A.U

Company Name

Noken Design S.A.U

Address

CV-20 Km2 VILA-REAL CASTELLON

Postcode

12540

Country

Spain

General Email

certificaciones@noken.com

View All Listings by this Company

Range of wall mounted brass bodied spout outlets (various finishes, see model) incorporating a plastic aerator. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2301049

Size:

¾” BSP (M)

Marking:

AXOR on face plate

Installation Requirements:

R001 R040

Expiry date:

31/01/2028

Model:

38 411 xxx 45 410 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of longitudinal (EFW) welded stainless steel (Grade 304/304L & 316/316L) pipes. Maximum working pressures: 1¼” sch 10: below ground = 55.0 bar. Above ground = 74.0 bar. 1½” sch 10: below ground = 48.0 bar. Above ground = 64.0 bar. 2” sch 10: below ground = 38.5 bar. Above ground = 51.0 bar. 2½” sch 10: below ground = 34.5 bar. Above ground = 46.0 bar. 3” sch 10: below ground = 28.0 bar. Above ground = 38.0 bar. 4” sch 10: below ground = 22.0 bar. Above ground = 29.0 bar. 5” sch 10: below ground = 19.5 bar. Above ground = 26.0 bar. 6” sch 10: below ground = 16.0 bar. Above ground = 22.0 bar. 8” sch 10: below ground = 14.0 bar. Above ground = 18.0 bar. ½” sch 40 & ¾” sch 40: below ground = 60.0 bar. Above ground = 80.0 bar. 1” sch 40: below ground = 30.0 bar. Above ground = 40.0 bar. 1¼” sch 40 & 1½” sch 40: below ground = 60.0 bar. Above ground = 80.0 bar. 2” sch 40: below ground = 54.5 bar. Above ground = 72.0 bar. 2½” sch 40: below ground = 60.0 bar. Above ground = 80.0 bar. 3” sch 40: below ground = 52.0 bar. Above ground = 69.0 bar. 4” sch 40: below ground = 44 bar. Above ground = 58.0 bar 5” sch 40: below ground = 38.5 bar. Above ground = 51.0 bar. 6” sch 40: below ground = 35.0 bar. Above ground = 46.0 bar. 8” sch 40: below ground = 31.0 bar. Above ground = 41.0 bar. Maximum operating temperature 100°C.

Section:

0870 Tubes

Section Subtitle:

Stainless Steel.

WRAS Approval Number:

2212087

Note:

Not tested in conjunction with any fittings.

Size:

sch 10 pipes: 1¼” OD up to 8” OD. sch 40 pipes: ½” OD up to 8” OD.

Marking:

ARMETAL and technical information, including steel grade (TPXXX/XXXL, where XXX is 304 or 316), and batch code (including date of manufacture (B#8xxxxWWYY or B#2xxxxWWYY) printed on body.

Installation Requirements:

R001

Expiry date:

31/12/2027

Proviso:

Not tested in conjunction with any fittings.

Model:

Armetal ‘ASP’ range of stainless steel pipes (Grade 304/304L & 316/316L) - sch 10 & sch 40 pipes.

Product Images

Approval Holder:

Armetal Stainless Pipe Co.Ltd. (ASP).

Company Name

Armetal Stainless Pipe Co.Ltd. (ASP).

Address

3674-Al Madinah As Sinaiyah Al Jadidah, Unit No.3, Riyadh 14334-8376

Country

Saudi Arabia

Phone

+966 11265 2030

View All Listings by this Company

Manufacturer:

Armetal Stainless Pipe Co.Ltd. (ASP).

Company Name

Armetal Stainless Pipe Co.Ltd. (ASP).

Address

3674-Al Madinah As Sinaiyah Al Jadidah, Unit No.3, Riyadh 14334-8376

Country

Saudi Arabia

Phone

+966 11265 2030

View All Listings by this Company

CB Ranges of brass, DZR brass, chromium plated brass, nickel plated brass and DZR brass compression fittings for use with copper pipe to BS EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211358

Size:

See models.

Marking:

CB, UK or UK Made, Size & EN1254-2 on compression nut. CR on DZR models.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

543541 * CB COMPRESSION 1P REDUCER 15MMX8MM 543542 * CB COMPRESSION 1P REDUCER 15MMX10MM 543543 * CB COMPRESSION 1P REDUCER 15MMX12MM 543544 * CB COMPRESSION 1P REDUCER 22MMX15MM 543473 * CB COMPRESSION 1P REDUCER 28MMX15MM 543474 * CB COMPRESSION 1P REDUCER 28MMX22MM 543571 * CB COMPRESSION REDUCING SET 35MMX15MM 543572 * CB COMPRESSION REDUCING SET 35MMX22MM 543573 * CB COMPRESSION REDUCING SET 35MMX28MM 543574 * CB COMPRESSION REDUCING SET 42MMX22MM 543575 * CB COMPRESSION REDUCING SET 42MMX28MM 543576 * CB COMPRESSION REDUCING SET 42MMX35MM 543577 * CB COMPRESSION REDUCING SET 54MMX28MM 543578 * CB COMPRESSION REDUCING SET 54MMX35MM 543579 * CB COMPRESSION REDUCING SET 54MMX42MM 543673 * CB COMPRESSION STRAIGHT COUP 15MM CP 543674 * CB COMPRESSION STRAIGHT COUP 22MM CP 543675 * CB COMPRESSION STRAIGHT COUP 28MM CP 543713 * CB COMPRESSION MI STR COUP 15MMX1/2"CP 543714 * CB COMPRESSION MI STR COUP 22MMX3/4"CP 543716 * CB COMPRESSION MI STR COUP 28MMX1" CP 543703 * CB COMPRESSION FI STR COUP 15MMX1/2"CP 543704 * CB COMPRESSION FI STR COUP 22MMX3/4"CP 543653 * CB COMPRESSION ELBOW CP 15MM 543654 * CB COMPRESSION ELBOW CP 22MM 543655 * CB COMPRESSION ELBOW CP 28MM 543695 * CB COMPRESSION MI ELBOW 15MMX1/2" CP 543693 * CB COMPRESSION FI ELBOW 15MMX1/2" CP 543694 * CB COMPRESSION FI COMP ELBOW 22MMX1"CP 543663 * CB COMPRESSION EQUAL TEE CP 15MM 543664 * CB COMPRESSION EQUAL TEE CP 22MM 543665 * CB COMPRESSION EQUAL TEE CP 28MM 543724 * CB COMPRESS RED TEE 22MMX15MMX22MM CP 543725 * CB COMPRESS RED TEE 22MMX22MMX15MM CP 543723 * CB COMPRESS RED TEE 15MMX15MMX22MM CP 543705 * CB COMPRESSION FI STR COUP 22MMX1" CP 543706 * CB COMPRESSION FI STR COUP 28MMX1" CP 543683 * CB COMPRESSION W/PLATE ELB 15MMX1/2"CP 543451 * CB COMPRESSION EQUAL TEE 8MM 543452 * CB COMPRESSION EQUAL TEE 10MM 543453 * CB COMPRESSION EQUAL TEE 15MM 543454 * CB COMPRESSION EQUAL TEE 22MM 543455 * CB COMPRESSION EQUAL TEE 28MM 543553 * CB COMPRESSION RED TEE 22MMX22MMX15MM 543554 * CB COMPRESSION RED TEE 22MMX15MMX22MM 543555 * CB COMPRESS RE/RB TEE 22MMX15MMX15MM 543513 * CB COMPRESSION FI TEE 15MMX15MMX1/2 543514 * CB COMPRESSION FI TEE 22MMX22MMX1/2 543515 * CB COMPRESSION FI TEE 22MMX22MMX3/4 543516 * CB COMPRESSION FI TEE 28MMX28MMX1/2 543431 * CB COMPRESSION 90D ELBOW 8MM 543432 * CB COMPRESSION 90D ELBOW 10MM 543433 * CB COMPRESSION 90D ELBOW 15MM 543434 * CB COMPRESSION 90D ELBOW 22MM 543435 * CB COMPRESSION 90D ELBOW 28MM 543623 * CB COMPRES 90D MALE TPR ELBOW 15MMX1/2 543625 * CB COMPRES 90D MALE TPR ELBOW 22MMX3/4 543624 * CB COMPRES 90D MALE TPR ELBOW 22MMX1 543626 * CB COMPRES 90D MALE TPR ELBOW 28MMX1 543613 * CB COMPRESS 90D FEMALE ELBOW 15MMX1/2 543615 * CB COMPRESS 90D FEMALE ELBOW 22MMX3/4 543614 * CB COMPRESS 90D FEMALE ELBOW 22MMX1 543616 * CB COMPRESSION 90D FEMALE ELBOW 28MMX1 543493 * CB COMPRESSION BENT TAP CON 15MMX1/2'' 543483 * CB COMPRESSION W/PLATE ELBOW 15MMX1/2 543591 * CB COMPRESSION STRAIGHT COUPLING 8MM 543592 * CB COMPRESSION STRAIGHT COUPLING 10MM 543593 * CB COMPRESSION STRAIGHT COUPLING 15MM 543594 * CB COMPRESSION STRAIGHT COUPLING 22MM 543595 * CB COMPRESSION STRAIGHT COUPLING 28MM 543562 * CB COMPRESS REDUCING COUPLING 10MMX8MM 543563 * CB COMPRESS REDUCING COUPLING 15MMX8MM 543564 * CB COMPRESS REDUCING COUPLING15MMX10MM 543565 * CB COMPRESSION RED COUPLING 15MMX12MM 543566 * CB COMPRESSION RED COUPLING 22MMX15MM 543567 * CB COMPRESSION RED COUPLING 28MMX22MM 543531 * CB COMPRESSION MI PRL STR CON 15X1/2 543532 * CB COMPRESSION MI PRL STR CON 22X3/4 543533 * CB COMPRESSION MI PRL STR CON 22X1 543534 * CB COMPRESSION MI PRL STR CON 28X1 543461 * CB COMPRESSION MI TPT STR CON 8MMX1/8 543521 * CB COMPRESSION MI TPR STR CON 8MMX1/4" 543522 * CB COMPRESSION MI TPR STR CON 8MMX3/8 543523 * CB COMPRESSION MI TPR STR CON 10MMX1/4 543524 * CB COMPRESSION MI TPR STR CON 10MMX3/8 543462 * CB COMPRESSION MI TPR STR CON 10MMX1/2 543527 * CB COMPRESSION MI TPR STR CON 15MMX3/8 543525 * CB COMPRESSION MI TPR STR CON 15MMX1/2 543526 * CB COMPRESSION MI TPR STR CON 15MMX3/4 543528 * CB COMPRESSION MI TPR STR CON 22MMX3/4 543529 * CB COMPRESSION MI TPR STR CON 22MMX1 543530 * CB COMPRESSION MI TPR STR CON 28MMX1 543501 * CB COMPRESSION FI STR CON 8MMX1/4 543502 * CB COMPRESSION FI STR CON 10MMX1/4 543503 * CB COMPRESSION FI STR CON 15MMX1/2 543504 * CB COMPRESSION FI STR CON 15MMX3/4 543505 * CB COMPRESSION FI STR CON 22MMX3/4 543506 * CB COMPRESSION FI STR CON 22MMX1 543507 * CB COMPRESSION FI STR CON 28MMX1 543633 * CB COMPRES STRAIGHT TAP CON 15MMX1/2 543634 * CB COMPRES STRAIGHT TAP CON 22MMX3/4 543643 * CB COMPRESSION TANK CONNECTOR 15MM 543644 * CB COMPRESSION TANK CONNECTOR 22MM 543645 * CB COMPRESSION TANK CONNECTOR 28MM 543581 * CB COMPRESSION STOP END 8MM 543582 * CB COMPRESSION STOP END 10MM 543583 * CB COMPRESSION STOP END 15MM 543584 * CB COMPRESSION STOP END 22MM 543585 * CB COMPRESSION STOP END 28MM 543586 * CB COMPRESSION STOP END 35MM 543587 * CB COMPRESSION STOP END 42MM 543588 * CB COMPRESSION STOP END 54MM

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

CB ranges of brass, chromium plated brass, nickel plated brass and DZR brass compression fittings for use with copper pipe (manufactured to to BS EN1057:2006 + A1:2010). Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2212348

Size:

35mm to 54mm compression.

Marking:

CB, UK or UK Made, Size & EN1254-2 on compression nut. CR on DZR models.

Installation Requirements:

R001

Expiry date:

31/12/2027

Model:

CB ranges comprising of models: 543456 CB EQUAL TEE 35MM DR 543457 CB EQUAL TEE 42MM DR 543458 CB EQUAL TEE 54MM DR 543436 CB EQUAL ELBOW 35MM DR 543437 CB EQUAL ELBOW 42MM DR 543438 CB EQUAL ELBOW 54MM DR 543596 CB STRAIGHT COUPLING 35MM DR 543597 CB STRAIGHT COUPLING 42MM DR 543598 CB STRAIGHT COUPLING 54MM DR 543535 CB MI PRL STR CON 35X1.1/4 DR 543536 CB MI PRL STR CON 42X1.1/2 DR 543537 CB MI PRL STR CON 54X2 DR 543508 CB FI STR CONN 35X1.1/4 DR 543509 CB FI STR CONN 42X1.1/2 DR 543510 CB FI STR CONN 54X2 DR

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Ranges of brass & chromium plated brass, nickel plated brass compression fittings for use with copper pipe to BS EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211359

Size:

See models.

Marking:

CPS, Size, EN1542-2, UK or UK Made & UK on compression nut.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

182318 STRAIGHT COUPLING 317638 CHROME SWIVEL STRAIGHT TAP CONNECTOR 427218 STRAIGHT REDUCING COUPLING 537297 FEMALE COUPLING 538902 MALE COUPLING 538903 FEMALE COUPLING 538908 STOP END 754332 MALE COUPLING 755960 EQUAL ELBOW 797600 CHROME STRAIGHT COUPLING 797601 CHROME STRAIGHT COUPLING 797602 CHROME STRAIGHT COUPLING 797603 CHROME MALE COUPLING 797606 CHROME FEMALE COUPLING 797610 CHROME EQUAL ELBOW 797611 CHROME EQUAL ELBOW 797612 CHROME MALE ELBOW 797613 CHROME FEMALE ELBOW 797614 CHROME EQUAL TEE 797615 CHROME EQUAL TEE 799319 CHROME WALL PLATE ELBOW 801711 CHROME EQUAL ELBOW 870222 CHROME MALE ELBOW 870225 CHROME FEMALE ELBOW 874322 CHROME STOP END 875078 CHROME THREE PIECE REDUCING SET 875082 CHROME STOP END 875087 CHROME REDUCED END TEE 875088 CHROME REDUCED BRANCH & END TEE 950146 STRAIGHT COUPLING 950150 STRAIGHT REDUCING COUPLING 950152 STRAIGHT REDUCING COUPLING 950159 MALE COUPLING 950164 MALE COUPLING 950169 MALE COUPLING 950187 FEMALE COUPLING 950191 FEMALE COUPLING 950205 TANK CONNECTOR 950211 STOP END 950220 EQUAL ELBOW 950247 MALE ELBOW 950251 MALE ELBOW 950269 FEMALE ELBOW 950270 FEMALE ELBOW 950271 FEMALE ELBOW 950274 FEMALE ELBOW 950275 SWIVEL BENT TAP CONNECTOR 950278 WALL PLATE ELBOW 950286 EQUAL TEE 950290 REDUCED BRANCH & END TEE 950291 REDUCED END TEE 950293 REDUCED BRANCH TEE 950301 REDUCED BRANCH TEE 950326 REDUCED FEMALE BRANCH TEE 950327 REDUCED FEMALE BRANCH TEE 953075 STRAIGHT REDUCING COUPLING 953171 STRAIGHT REDUCING COUPLING 954298 STRAIGHT COUPLING 954300 STRAIGHT COUPLING 954301 STRAIGHT COUPLING 954314 MALE COUPLING 954317 MALE COUPLING 954320 MALE COUPLING 954321 MALE COUPLING 954337 FEMALE COUPLING 954340 FEMALE COUPLING 954341 FEMALE COUPLING 954344 SWIVEL STRAIGHT TAP CONNECTOR 954346 SWIVEL STRAIGHT TAP CONNECTOR 954347 TANK CONNECTOR 954348 TANK CONNECTOR 954351 STOP END 954352 STOP END 954353 STOP END 954355 EQUAL ELBOW 954356 EQUAL ELBOW 954357 EQUAL ELBOW 954367 MALE ELBOW 954370 MALE ELBOW 954394 EQUAL TEE 954395 EQUAL TEE 954396 EQUAL TEE 954397 EQUAL TEE P701CP.09 28mm EQUAL TEE CHROME P702CP.16 22 x 22 x 15mm TEE CHROME

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Country

United Kingdom

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Range of commercial air or liquid cooled ice making machines with water controlled via solenoid valve. Maximum working pressure 5.5 Bar COLD WATER USE

Section:

1500 Ice Making Machines

Size:

PVC lined flexible hose with ¾” bps captive nut end connections

Marking:

Manitowoc on front panel, model, operating info on label on back panel

Installation Requirements:

R001 R150 R171 R511

Expiry date:

31/01/2028

Model:

U(*)P0140A-251*, U(*)P0240A-251*, U(*)P0310A-251*, UGP0020A-251*, UGP0030A-251*, UGP0040A-251*, UGP0050A-251*, UGP0080A-251* Notes: U – U series (NEO) ice maker; UG – Sotto series ice maker (*) – D, Y or R. Dependent on ice cube size, D-Dice, Y-Half Dice, R-regular P –R290 (propane) Refrigerant 0140, 0240, 0310,0020,0030,0040,0050,0080 – Nominal ice production per day A – Air cooled; W-Water cooled 251 –Electrical configuration (220-240V/50Hz/ 1 Phase) *– Character(s) indicating customer/country specific options

Product Images

Approval Holder:

Manitowoc Ice, Inc

Company Name

Manitowoc Ice, Inc

Address

2110 S. 26 St Manitowoc WI 54220

Country

USA

View All Listings by this Company

Manufacturer:

Pentair Commercial Ice LLC

Company Name

Pentair Commercial Ice LLC

Address

5500 Wayzata Blvd. Suite 900 Golden Valley, MN

Postcode

55416

Country

United States

View All Listings by this Company

‘H5000’ range of helical rotor, bulk water meters with blue epoxy coated cast iron bodies and nitrile `O` rings. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1505 Water Meters

Size:

40mm, 50mm, 65mm, 80mm, 100mm, 125mm & 150mm flanged connections.

Marking:

Honeywell (or elster) on lid. Honeywell, elster, max pressure, size & other technical information on dial face. Size & Flow Arrow on Body.

Installation Requirements:

R001

Expiry date:

31/01/2028

Model:

H5000 Water meter – DN40/50/65/80/100/125/150.

Product Images

Approval Holder:

Elster Water Metering Limited

Company Name

Elster Water Metering Limited

Address

130 Camford Way Sundon Park Luton

Postcode

LU3 3AN

Country

United Kingdom

Phone

01582 846 400

General Email

matthew.ward@honeywell.com

View All Listings by this Company

Range of water meters with blue epoxy coated ductile iron bodies, plastic measurement chambers and vanes and NBR ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Size:

Flanged inlet/outlet: DN40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400.

Marking:

Flow arrow & size on side of body, Watertech Logo Model number and pressure rating and product info on dial face.

Installation Requirements:

R001

Expiry date:

29/02/2028

Model:

OMEGA-SDC WATER METERS

Approval Holder:

WaterTech S.p.A

Company Name

WaterTech S.p.A

Address

Via Bartolomeo Cupin 12 Asti (AT)

Postcode

14100

Country

Italy

Phone

+39 3397920026

General Email

diegobettio@wtmeters.it

View All Listings by this Company

Range of water meters with brass bodies, plastic turbines and EPDM washers. Inlets incorporate a plastic filter. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 50°C

Section:

1505 Water Meters

Size:

DN15 – DN 40 - ¾” – 2” Male BSP, DN 50 – DN50 Flange.

Marking:

Flow arrow & size on side of body, Watertech logo, and address, Model number and pressure rating and product info on dial face.

Installation Requirements:

R001

Expiry date:

31/12/2027

Model:

BETA-SDC DN15 – ¾” BSP (M), BETA-SDC DN 20 – 1” BSP (M), BETA-SDC DN 25 – 1 ¼” BSP (M), BETA-SDC DN 32 - 1 ½” BSP (M), BETA-SDC DN 40 - 2” BSP (M), BETA-SDC DN 50.

Approval Holder:

WaterTech S.p.A

Company Name

WaterTech S.p.A

Address

Via Bartolomeo Cupin 12 Asti (AT)

Postcode

14100

Country

Italy

Phone

+39 3397920026

General Email

diegobettio@wtmeters.it

View All Listings by this Company

‘V210’ range of volumetric water meters with brass bodies and NBR ‘O’-rings. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1505 Water Meters

Size:

See model.

Marking:

Elster or Honeywell on lid. Elster or Honeywell on meter face. Size, CE and other technical info on case.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

V210 Range: DN15 V210 (36RPL CHAMBER): 1½” BSP (M) inlet/outlet, DN20 V210 (16.5RPL CHAMBER): 1½” BSP (M) inlet/outlet, DN25 V210 (13.2RPL CHAMBER): 2” BSP (M) inlet/outlet.

Product Images

Approval Holder:

Elster Water Metering Limited

Company Name

Elster Water Metering Limited

Address

130 Camford Way Sundon Park Luton

Postcode

LU3 3AN

Country

United Kingdom

Phone

01582 846 400

General Email

matthew.ward@honeywell.com

View All Listings by this Company

‘V200’ range of rotating piston (semi positive) volumetric in-line water meters with brass bodies, EPDM ‘O’-rings and seal (DN40 model only), NBR ‘O’-rings (all other models) and seal (DN15 36RPL model only). Maximum working pressure 16.0 bar. Cold water use only.

Section:

1505 Water Meters

Size:

See model.

Marking:

Elster or Honeywell on lid. Elster or Honeywell on meter face. Flow arrow, meter type (V200) on body. Product info on case.

Installation Requirements:

R001

Expiry date:

31/01/2028

Model:

V200 Range: DN15 V200 (36RPL CHAMBER): ¾” BSP (M) inlet/outlet, DN15 V200 (16.5RPL CHAMBER): ¾” BSP (M) inlet/outlet, DN20 V200 (16.5RPL CHAMBER): ¾” or 1” BSP (M) inlet/outlet, DN25 V200 (13.2RPL CHAMBER): 1¼” BSP (M) inlet/outlet, DN30 V200 (5.5RPL CHAMBER): 1¼” or 1½” or 2” BSP (M) inlet/outlet, DN40 V200 (3.25RPL CHAMBER): 2” BSP (M) inlet/outlet.

Product Images

Approval Holder:

Elster Water Metering Limited

Company Name

Elster Water Metering Limited

Address

130 Camford Way Sundon Park Luton

Postcode

LU3 3AN

Country

United Kingdom

Phone

01582 846 400

General Email

matthew.ward@honeywell.com

View All Listings by this Company

‘V110’ range in-line volumetric water meters with black plastic bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1505 Water Meters

Size:

See model.

Marking:

Elster, Kent or Honeywell on lid and body.

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

V110 Range: DN15: ¾" BSP (M) inlet and outlet, DN20: 1" BSP (M) inlet and outlet, DN25: 1¼" BSP (M) inlet and outlet.

Product Images

Approval Holder:

Elster Water Metering Limited

Company Name

Elster Water Metering Limited

Address

130 Camford Way Sundon Park Luton

Postcode

LU3 3AN

Country

United Kingdom

Phone

01582 846 400

General Email

matthew.ward@honeywell.com

View All Listings by this Company

Range of quick release couplers with a brass body and EPDM O-rings. Maximum working pressure 12.0 bar.

Non-metallic materials and components comply with BS6920 at 99°C

Section:

1530 Miscellaneous Fittings

Size:

See Models

Marking:

Clever Coupler Logo (CC) on body.

Installation Requirements:

R001

Expiry date:

31/12/2027

Model:

CC22 – 22mm spigot. CC28 – 28mm spigot.

Product Images

Approval Holder:

Clever Coupler Ltd

Company Name

Clever Coupler Ltd

Address

4 Lyte Hill Lane, Torquay, Devon TQ2 7GT

View All Listings by this Company

Range of in-line plastic flow restrictors housed within black or grey glass fibre reinforced nylon bodies. Maximum working pressure 16.0

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1530 Miscellaneous Fittings

Size:

1 1/2" BSP (M)

Marking:

HL2024 MeterSave on body.

Installation Requirements:

R001 R008

Expiry date:

31/01/2028

Model:

1241.1100.56.35.821, 1241.1125.56.36.821, 1241.1128.56.36.821, 1241.1150.56.36.821, 1241.1153.56.36.821 1241.1156.56.36.821 MISCELLANEOUS FITTINGS

Approval Holder:

Cenergist Ltd

Company Name

Cenergist Ltd

Address

8 Bede House Tower Road, Glover Industrial Estate, Washington, England

Postcode

NE37 2SH

Country

United Kingdom

View All Listings by this Company

Range of water pressure booster sets with a cold water storage cistern and booster pump. All models incorporate a non-return valve, not suitable for backflow protection. These models have an AG air gap suitable for fluid category 3 protection. Maximum working pressure 6.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2301305

Size:

½” BSP (M).

Marking:

Adhesive label on top of cistern stating - Stuart Turner, Model No, Serial number, Part No, Volume in litres and technical information.

Installation Requirements:

R001 R415 R270 R280

Expiry date:

31/01/2028

Model:

46711 iBoost V200 with cold water storage cistern and variable speed pump. 46668 iBoost F200 with cold water storage cistern and fixed speed pump.

Product Images

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Manufacturer:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of water pressure booster sets with a cold water storage cistern and booster pump. All models incorporate a non-return valve, not suitable for backflow protection. These models have an AB air gap suitable for fluid category 5 protection. Maximum working pressure 6.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2301357

Note:

R574 applies. The water in the storage cistern is considered wholesome.

Size:

½” BSP (M).

Marking:

Adhesive label on top of cistern stating - Stuart Turner, Model No, Serial number, Part No, Volume in litres and technical information.

Installation Requirements:

R001 R415 R270 R280 R570

Expiry date:

31/01/2028

Model:

46713 iBoost V200 CAT5 with cold water storage cistern and variable speed pump. 46677 iBoost F200 CAT5 with cold water storage cistern and fixed speed pump.

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Manufacturer:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of vertical multistage pumps with stainless-steel bodies, stainless-steel impellers, shaft and outer sleeve. Maximum working pressures: T (oval flange): 16.0 bar. V (Victaullic & grooved), C (clamp flanges) & F (round flange) versions: 26.0 bar. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2110136

Size:

FGV3 model - F (round flange) versions: DN25. FGV6-FGV20 models - F (round flange) versions: DN32-50. FGV3-FGV20 models - T (oval flange), V (Victaullic - EV; Grooved - VR), C (clamp flanges) & F (round flange) versions: DN32-50.

Marking:

Fourgroup, model number, and other technical info on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2026

Model:

FGV 3 FGV 6 FGV 10 FGV 15 FGV 20 Code example FGV X/Y A B C D E Where: FGV = Standard Pump model X = Rated flow [m³/h] (varies: 1-20). Y = No. of stages. A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round; "T" - oval; "V" - Victaulic; "C" - clamp. C = Materials: "I" - (AISI304/EN1.4301); "N" (AISI316/EN1.4401). D = Motor power (kW x 10). E = Frequency

Approval Holder:

FOURGROUP

Company Name

FOURGROUP

Address

via E. Fermi 8, 35020 Polverara (PD)

Country

Italy

View All Listings by this Company