| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 703* | Various | ½" BSP (F) | 5 bar | 65 °C | LUSSO | Decorative plate | No | Ceramic cartridge | Not Applicable | Aerator |
* denotes finish and can be replaced by: C - Chrome, RG - Rose Gold, BTG - Brushed Titanium gold, BZG - Brushed Zirconium gold, BRG - Brushed Rose gold, MW - Matte white, BS - Brushed stainless, BN - Brushed nickel, PN - Polished nickel, GM - Gunmetal, B - Matte black, TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TPASHBSM3 | Chromed | BSP 3/4" (M) | 10 bar | 60 °C | Lecico | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| TPSOUBSM3 | Chromed | BSP 3/4" (M) | 10 bar | 60 °C | Lecico | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1188-** | Various | 3/4" BSP (M) | 5 bar | 65 °C | CARLOTA | Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| 1271-** | Various | 3/4" BSP (M) | 5 bar | 65 °C | CARLOTA | Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| 1274-** | Various | 3/4" BSP (M) | 5 bar | 65 °C | CARLOTA | Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| 1313-** | Various | 3/4" BSP (M) | 5 bar | 65 °C | CARLOTA | Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| 1320-** | Various | 3/4" BSP (M) | 5 bar | 65 °C | CARLOTA | Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 1322-** | Various | 3/4" BSP (M) | 5 bar | 65 °C | CARLOTA | Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 1322A-** | Various | 3/4" BSP (M) | 5 bar | 65 °C | CARLOTA | Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 1322B-** | Various | 3/4" BSP (M) | 5 bar | 65 °C | CARLOTA | Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator |
Where** represents finish and can be replaced by: CR=Chrome plated MB=Matt black BB=Brushed brass BN=Brushed nickel GM=Gun Metal
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3098 | Chrome plated | 3/4”x 1/2" BSP (M) offset union | 10 bar | 60 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Not Applicable | Flow Straightener |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 53011* | Various | ½" captive nut | 10 bar | 65 °C | LUSSO | On body | No | 1/4 Turn ceramic disk | Metal Backnuts | Aerator |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
Range of wall mounted, concealed, three-hole, single outlet (fixed) combination tap assemblies with brass bodies (chromium plated), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.
Range of three-hole, single outlet (fixed) wall mounted, concealed tap assemblies, (brass bodies - various trim sets). Product is supplied with a rough in set BDM-MIX-C309-T2 and external trim (see models). Incorporating quarter turn ceramic disc headworks and various operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)
Range of stainless-steel (304/316L) press fittings with EPDM ‘O-rings to be used with stainless-steel (304/316L) pipes. The HF fittings also incorporate an EPDM gasket. Jointing is achieved via a crimping tool using a ‘V’ profile. For above ground use. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.
VSH XPRESS Range of ‘M’ profile stainless steel press fittings with EPDM ‘O’-rings for use with VSH SudoXPress stainless steel tube. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Plastic bodied push fit fittings for use with Shin Won Tube Co., Ltd. SWPE™ (LLDPE) tube, (not covered by the scope of this approval). Maximum working pressure 10.0 bar. Cold water use only.
Range of pressure transmitters with stainless steel bodies. Maximum working pressure 50.0 bar. Maximum operating temperatures 90°C.
Range of circulating pumps, with plastic or stainless steel (cast EN 1.4308) bodies and a plastic impeller. Maximum working pressures: Stainless steel bodied pumps 10.0 bar, Plastic bodied pumps 3.0 bar. Maximum operating temperature 95°C.
Range of wall mounted shower outlets with brass bodies (chrome plated). The outlet of the 32971 and 65295 models incorporates an approved check valve cartridge, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum operating temperature 70°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Gaia 200 Overhead - 1589805 | White/Chrome | 15mm | Open Outlet bar | 50 °C | Kohler Mira Limited | "Kohler Mira Limited" on top of overheads | No | No | Not Applicable | Not Applicable | |
| Gaia 200 Overhead - 1621057 | Black/White | 15mm | Open Outlet bar | 50 °C | Kohler Mira Limited | "Kohler Mira Limited" on top of overheads | No | No | Not Applicable | Not Applicable | |
| 100 FOKUS HANDSET - 1555570 | CHROME | 15mm | Open Outlet bar | 50 °C | Mira Showers | “Mira Showers” logo on front lower handset | No | No | Not Applicable | Not Applicable | Handset, |
| 100 FOKUS HANDSET - 1555588 | BLACK | 15mm | Open Outlet bar | 50 °C | Mira Showers | “Mira Showers” logo on front lower handset | No | No | Not Applicable | Not Applicable | Handset, |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| AOOSCPUK | Chrome | 1/2" BSP (F) | 0 bar | 60 °C | Methven | on shower handset. | No | Handset, | |||
| AOOSBKUK | Black | 1/2" BSP (F) | 0 bar | 60 °C | Methven | on shower handset. | No | Handset, |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1001450AQXX | various | 1/2" BSP (F) | Open outlet bar | 60 °C | Aqualisa | Body | No | Fixed Head, | |||
| 1001447AQXX | various | 1/2" BSP (F) | Open outlet bar | 60 °C | Aqualisa | Body | No | Fixed Head, | |||
| 1001445AQXX | various | 1/2" BSP (F) | Open outlet bar | 60 °C | Aqualisa | Body | No | Fixed Head, |
Fixed Head in 4 different colours - Chrome, Matt Black, Brushed Brass and Gunmetal Grey AQ = Aqualisa XX = AA , AD , AJ , AH AQAA - Chrome AQAD - Matt Black AQAJ - Gunmetal Grey AQAH - Brushed Brass
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 61408 | Chrome plated | 3/4" BSP (M) | 10 bar | 85 °C | Bokeya | Rear of Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| 61108 | Chrome plated | 3/4" BSP (M) | 10 bar | 85 °C | Bokeya | Rear of Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| 51508AQ | Chrome plated | 3/4" BSP (M) | 10 bar | 85 °C | Bokeya | Rear of Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener |
Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined flexible hose assemblies with DZR brass end connections. Some models incorporate spherical valves. Compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Ranges of free standing stainless steel cylinders. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| FRM SHCDIV C | CHROME | 15mm Compression | 5.0 bar | 85 °C | Bristan | Faceplate | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | |
| FRM SHCDIV BLK | BLACK | 15mm Compression | 5.0 bar | 85 °C | Bristan | Faceplate | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | |
| FRM SHCDIV GM | GUN METAL | 15mm Compression | 5.0 bar | 85 °C | Bristan | Faceplate | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | |
| FRM SHCDIV BB | BRUSHED BRASS | 15mm Compression | 5.0 bar | 85 °C | Bristan | Faceplate | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable |
Model added February 2026: RP3 SAI SHCDIV C
Page 221 of 223
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
