Single hole, single outlet (swivel) pull out spray combination tap assemblies (brass bodies – various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The outlet incorporates a plastic aerator and a push button spray. The connection between the outlet and the hose incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides adequate backflow protection. Maximum working pressure 5.0 Bar. Maximum operating temperature 65.0°C
Non-metallic materials and components comply with BS6920 at 65°C
Single hole, single outlet (swivel) combination tap assemblies (brass body - various finishes), incorporating ceramic cartridge headworks with a single lever operating member. The spout outlet incorporates a plastic flow straightener or plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C
Range of two-hole, single outlet, fixed, combination tap assemblies (brass bodies – various finishes) incorporating quarter turn ceramic disc headworks with single lever or cross-top operating members. The spout outlets incorporate plastic flow straighteners. The products are supplied with metal back nuts. Maximum working pressure 10.0 Bar
Non-metallic materials and components comply with BS6920 at 65°C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| COB BF C | CHROME | 3/4" BSP (M) | 5 bar | 60 °C | Bristan | Handle or Body | No | 1/4 Turn ceramic disk | Metal Backnuts | Flow Straightener | |
| RP3 COB BF C | CROME | 3/4" BSP (M) | 5 bar | 60 °C | Bristan | Handle or Body | No | 1/4 Turn ceramic disk | Metal Backnuts | Flow Straightener | |
| COB BF BLK | BLACK | 3/4" BSP (M) | 5 bar | 60 °C | Bristan | Handle or Body | No | 1/4 Turn ceramic disk | Metal Backnuts | Flow Straightener | |
| 144347 | CHROME | 3/4" BSP (M) | 5 bar | 60 °C | Bristan | Handle or Body | No | 1/4 Turn ceramic disk | Metal Backnuts | Flow Straightener | |
| 257580 | BLACK | 3/4" BSP (M) | 5 bar | 60 °C | Bristan | Handle or Body | No | 1/4 Turn ceramic disk | Metal Backnuts | Flow Straightener |
Two hole, single outlet fixed combination tap assembly (brass body - Gun Metal finish)incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 65°C
Range of two hole, single outlet (fixed) combination tap assembly (chrome plated brass) incorporating quarter turn ceramic disk headworks with single lever operating members. The spout outlet incorporates a stainless steel strainer and a plastic flow straightener.
Non-metallic materials and components comply with BS6920 at 65°C
Wall mounted thermostatic blending valve (brass body, various finishes - see model) incorporating a 2-way ceramic disc headwork with a single lever operating member controlling and diverting the flow between the spout outlet or the shower outlet. Temperature is controlled independently via a thermostatic cartridge with a single lever operating member incorporating a manual override button. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 16.0 bar. Maximum operating temperature 75°C.
Range of two-hole, single outlet (fixed) combination tap assemblies (chrome plated brass bodies) incorporating quarter turn ceramic disc headworks with lever type operating members and a manually operated diverter to the shower outlet. The spout outlets incorporate plastic flow straighteners. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 65°C
Two hole, single outlet (swivel) combination tap assembly with brass bodies (chrome plated), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator or plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of two hole, double outlet (swivel) combination tap assemblies (chromium plated brass). The TAP2014 model incorporates non-rising spindle headworks with dome type operating members. The TAP 9023 model incorporates quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic flow straightener. The products are supplied with metal backnuts. Maximum working pressure 5.5 bar. Maximum operating temperature 70°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| CLS201 | Various | 1/2 | 6Bar bar | 65 °C | Waterworks | Body | No | 1/4 Turn ceramic disk | Plastic Backnuts | Aerator | Interconnecting Hoses, |
| CLS211 | Various | 1/2 | 6Bar bar | 65 °C | Waterworks | Body | No | 1/4 Turn ceramic disk | Plastic Backnuts | Aerator | Interconnecting Hoses, |
| CLS214 | Various | 1/2 | 6Bar bar | 65 °C | Waterworks | Body | No | 1/4 Turn ceramic disk | Plastic Backnuts | Aerator | Interconnecting Hoses, |
| CLS215 | Various | 1/2 | 6Bar bar | 65 °C | Waterworks | Body | No | 1/4 Turn ceramic disk | Plastic Backnuts | Aerator | Interconnecting Hoses, |
| BLS210 | Various | 1/2 | 6Bar bar | 65 °C | Waterworks | Body | No | 1/4 Turn ceramic disk | Plastic Backnuts | Aerator | Interconnecting Hoses, |
| BLS220 | Various | 1/2 | 6Bar bar | 65 °C | Waterworks | Body | No | 1/4 Turn ceramic disk | Plastic Backnuts | Aerator | Interconnecting Hoses, |
| BLS230 | Various | 1/2 | 6Bar bar | 65 °C | Waterworks | Body | No | 1/4 Turn ceramic disk | Plastic Backnuts | Aerator | Interconnecting Hoses, |
| BLS22A | Various | 1/2 | 6Bar bar | 65 °C | Waterworks | Body | No | 1/4 Turn ceramic disk | Plastic Backnuts | Aerator | Interconnecting Hoses, |
| BLS22B | Various | 1/2 | 6Bar bar | 65 °C | Waterworks | Body | No | 1/4 Turn ceramic disk | Plastic Backnuts | Aerator | Interconnecting Hoses, |
| BLS22C | Various | 1/2 | 6Bar bar | 65 °C | Waterworks | Body | No | 1/4 Turn ceramic disk | Plastic Backnuts | Aerator | Interconnecting Hoses, |
| BLS22D | Various | 1/2 | 6Bar bar | 65 °C | Waterworks | Body | No | 1/4 Turn ceramic disk | Plastic Backnuts | Aerator | Interconnecting Hoses, |
| BLS22E | Various | 1/2 | 6Bar bar | 65 °C | Waterworks | Body | No | 1/4 Turn ceramic disk | Plastic Backnuts | Aerator | Interconnecting Hoses, |
| BLS24A | Various | 1/2 | 6Bar bar | 65 °C | Waterworks | Body | No | 1/4 Turn ceramic disk | Plastic Backnuts | Aerator | Interconnecting Hoses, |
| BLS24B | Various | 1/2 | 6Bar bar | 65 °C | Waterworks | Body | No | 1/4 Turn ceramic disk | Plastic Backnuts | Aerator | Interconnecting Hoses, |
| BLS24C | Various | 1/2 | 6Bar bar | 65 °C | Waterworks | Body | No | 1/4 Turn ceramic disk | Plastic Backnuts | Aerator | Interconnecting Hoses, |
Finishes available: Chrome, Brass, Burnished Brass, Burnished Nickel, Matte Nickel, Copper, Dark Brass, Vintage Brass, Gold, Matte Gold.
Range of wall mounted spouts (plastic body). The outlet incorporates a plastic flow straightener. This product has not been tested or approved for claims of sterile properties made by the approval holder. Maximum operating temperature 60.0°C.
Range of stainless-steel expansion joints. Maximum working pressure 6.0 bar. Maximum operating temperature 90°C.
Range of stainless steel axial expansion joints (various end connections - see model). Maximum operating pressure 16.0 bar. Maximum operating temperature 100°C.
‘Center Pot’ range of expansion vessels. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
FLOWTECH range of fusion welded, PP-RCT fittings for use with Atlas PP-RCTGF pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of solder ring copper fittings for use with copper tube to EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Solder ring brass fittings for use with copper tube (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of brass fittings with compression connections to be used with copper pipes EN 1057. For above ground use only. Maximum working pressure 6.0 bar. Maximum operating temperature 95°C.
Range of brass compression fittings for use with copper pipes and Irish copper pipe (both manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperatures: 32612, 32634, 32712 & 32734 models: 65°C. All other models: 85°C.
Range of copper press fittings with EPDM rubber ‘O’-rings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of copper or brass (see model) end feed fittings for use with copper tube (manufactured to BS EN1057). Tap connectors incorporate Fibre/NBR washers. Male and female union adaptors incorporate a silicone gasket. Maximum working pressure using hard solder: 8mm to 28mm, ½” to 1” BSP (F) or (M), 1” straight cylinder union and captive nut ½” to ¾”: 25.0 bar, 35mm to 54mm, 1¼” to 2” BSP (F) or (M): 16.0 bar. Maximum working pressure using silver brazing alloy EN1044: 66.7mm to 108mm, 2½” to 4” BSP (F) or (M): 16.0 bar, 133mm to 219mm: 10.0 bar.
Non-metallic materials and components comply with BS6920 at 65°C
Range of counter-top or under-sink electrical water heaters. Maximum working pressure 6.5 bar. Maximum operating temperature 75°C, except 65°C for 10L models.
Range of rotating piston, volumetric in-line water meters with brass bodies. Maximum working pressure 16.0 bar. Cold water use only.
GKMV30P range in-line volumetric water meters with black plastic bodies. Maximum working pressure 16.0 bar. Cold water use only.
GKMV30P range in-line volumetric water meters with black plastic bodies. Maximum working pressure 16.0 bar. Cold water use only.
Range of electromagnetic water meters with stainless steel bodies. Maximum working pressure 16.0 bar. Cold water use only.
Range of ultrasonic water meters with brass bodies, plastic transducers and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
‘WS’ range of water meters with brass bodies, incorporating plastic impellers. The inlets incorporate plastic filters. Maximum working pressure 16 Bar. Maximum operating temperature 50°C.
Range of water meters with plastic bodies. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of ‘SureCal’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C
Range of multi-stage semiaxial submersible pumps with stainless steel bodies and impellers. Please note, this approval does not cover the motor, motor connection kit or power cable necessary for the pump to operate. Open outlet use only. Cold water use only.
STORMBOOST range of domestic water pressure booster pumps with brass impellors, brass bodies with accumulators, available from 60 – 300 litres (please refer to model). Models are supplied with reducing bushes, pressure gauges, pressure reducing valves and double check valve assemblies housed in DZR brass bodies with isolation valves and strainers. Maximum working pressure 4.5 bar. Maximum operating temperature 23°C.
Range of multistage pumps with stainless steel bodies and impellers. Maximum working pressure 10.0 bar. Cold Water Use Only.
Shower kit consisting of a plastic bodied shower handset (matt black), riser rail and PVC lined multi-layered shower hose with brass connections, EPDM 'O'-rings and strainer. Maximum operating temperature 60°C.
Range of shower handsets with plated plastic bodies (various finishes). The inlet incorporates a plastic strainer. Open outlet only. Maximum temperature of 60°C
Riser rail kit including riser & rose. Fixed head made of stainless steel with a swivel connection Maximum working pressure 10.0 bar. Maximum operating temperature 75°C.
Range of shower handsets and overhead showers with plastic bodies incorporating EPDM ‘O’-rings and washers. The inlet of the overhead shower models can be supplied with either a washer or a combined washer and stainless-steel strainer. Maximum operating temperature 65°C.
A12231 & A12011 Ranges of shower handsets with plastic bodies (various finishes - see model) incorporating EPDM ‘O’-rings and washers. Maximum operating temperature 65°C.
Range of ‘Y’-pattern strainers with blue epoxy coated ductile iron bodies and a stainless-steel screen. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of in-line Y patterned strainers with bronze bodies and a stainless-steel mesh strainer. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.
Range of ‘Y’-pattern strainers with a DZR brass body, stainless-steel strainer and PTFE gasket. Maximum operating pressure 20.0 bar. BS6920 85°C.
Range of wall mounted bib tap with brass bodies (various finishes - see model), incorporating either non-rising spindle headworks with cross top operating members or quarter turn ceramic disc headworks with single lever operating members. Maximum working pressure 10.0 bar. Maximum operating pressure 85°C.
Range of bib taps (nickel plated brass) or (DZR brass) bodies – see models, incorporating a spherical valve to control the flow. The products incorporate single lever operating members. Some models are supplied with lock shields (see models). The spout outlet incorporates a hose union spigot connection with a plastic flow straightener. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.
Range of wall mounted bib tap with chrome plated brass bodies, incorporating either non-rising spindle headworks with cross top operating members or quarter turn ceramic disc headworks with single lever operating members. Maximum working pressure 10.0 bar. Maximum operating pressure 85°C.
Range of drain taps incorporating brass bodies, EPDM seats and washers and a non-rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted hose union taps with brass bodies, incorporating a rising spindle headwork with a ‘T’ type operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of pillar taps (brass bodies, various finishes – see models) incorporating quarter turn ceramic disc headworks with either cross-top or single lever type operating members. The spout outlets incorporate plastic aerators. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| M0601 X XXX | VARIOUS | 1/2" BSP | 10.0 bar | 85 °C | PPI | Rear of body | No | Non-rising spindle | Metal Backnuts | Open Outlet |
X XXX Denotes the following: First X: Different handle option = and the second, third & fourth XXX for different finishes: Handles : A (Cross top type) Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.
Range of pillar taps with brass bodies (various finishes), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate plastic flow straighteners and the products are supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C
Page 215 of 227
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
