CR27A Chrome Pillar tap with single lever or cross-top operating members incorporating a 1/4 turn ceramic disc headwork. The spout incorporates a flow straightener. Maximum pressure 10 bar. Maximum temperature 60 °C
GE01, GE01/501, CR19 & CR19/501 Pillar taps with single lever or cross-top operating members incorporating a 1/4 turn ceramic disc headwork. Models GE01 & GE01/501 incorporate a flow straightener. Maximum pressure 10 bar. Maximum temperature 60 °C
Range of pillar taps (brass bodies – various finishes) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator. The products are supplied with metal backnuts. Maximum working pressure Bar 10.0 Maximum operating temperature 65°C.
Range of pillar taps (brass bodies – various finishes) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator. The products are supplied with metal backnuts. Maximum working pressure Bar 10.0 Maximum operating temperature 65°C.
Softpex® Range of Stainless Steel and Polyamide braided, PE lined connection hoses with various end connections DN6 (S/S & PA braided – PE-RT) , DN8 (S/S & PA braided – PEX), DN10 (S/S braided - PEX ONLY), DN13 (S/S braided - PEX ONLY) Maximum working pressure; 10 Bar Maximum operating temperature; 70°c
Range of wall mounted, concealed, manually operated blending valves with (brass bodies - various finishes), incorporating ceramic cartridge or quarter turn ceramic disc headworks and single lever or dome type operating members. Maximum working pressure 5.0 Bar Maximum operating temperature 70 °C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PM2 SHC3DIV C | Chrome | 15mm Compression | 5.0 bar | 85 °C | Bristan | Faceplate | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable |
Wall mounted shower valve (various finishes) incorporating a quarter turn ceramic disc headwork controlling flow on/off and to either the overhead shower or the handset (CAM-149T-RRK-XXX). Temperature is controlled via a thermostatic cartridge with a manual override button. The inlets incorporate approved check valve cartridges; however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure: 5bar. Maximum operating temperature: 60°C.
Wall mounted thermostatic bar type shower valves with a non-rising spindle headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member which incorporates a manual override button. Each inlet incorporates a combined EPDM washer and stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is also supplied with a shower riser rail, shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| E80018 | Chrome | 15mm | 5 bar | 60 °C | ESTEEM | Handle | No | Non-rising spindle | Not Applicable | Not Applicable | Shower Hose, Handset, Riser Rail, |
Range of flanged, lugged or wafer butterfly valves with either lever or hand wheel operation and a blue epoxy coated ductile iron body. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
Range of combined temperature and pressure relief valves incorporating DZR brass bodies and an EPDM diaphragm. Valves incorporate a manually operated rotational easing gear. The valves are pre-set at 6.0 or 7.0 bar (see models). Compression connections are for use with copper pipes (manufactured to EN 1057). Maximum operating temperature 90°C.
Range of combined temperature and relief valves incorporating DZR brass bodies and PTFE washers. Valves incorporate a manually operated rotational easing gear and can be supplied pre-set at 6.0 bar, 7.0 bar, 8.0 bar or 10.0 bar. Compression outlet connections are for use with copper pipe (manufactured to EN1057, R250). Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.
Range of concealed stop-valve trim sets with (brass bodies - various finishes), incorporating a quarter turn ceramic disc headwork and single lever operating member. Maximum working pressure 10.0 Bar. Maximum operating temperature 23C.
Range of in-line, manually adjustable pressure reducing valves with brushed chrome plated DZR brass bodies. Maximum inlet supply pressure 8.0 bar. Maximum outlet pressures between 1.0 and 6.0 bar. Maximum operating temperature 85°C.
Range of normally closed (L182 models) solenoid valves with either brass or stainless-steel bodies. Please refer to model for maximum working pressure. Maximum operating temperature 85.0°C
Range of spherical valves with nickel plated brass bodies, chrome plated ball and PTFE seats. Not supplied with operating member. Maximum working pressure 25.0 Bar Maximum operating temperature 90 °C.
Range of angled spherical valves with (brass bodies - various finishes), PTFE seats and NBR seals. Model Art. 1251 incorporates a stainless-steel filter. Maximum working pressure 10.0, 35.0 or 55.0 Bar (see models) Maximum operating temperature 90.0°C (Art. 1251 Cold water only)
Range of press fit lever operated spherical valves for use with EN1057 copper pipe, incorporating brass bodies, stainless steel ball and PTFE seats. Imperial sizes press profile is Vi and metric sizes press profile is M. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of ‘EFFAST’ spherical valves with plastic bodies incorporating EPDM ‘O’-rings. For use with ABS pipe manufactured to BS 5391. Maximum working pressure: 15 Bar. Maximum operating temperature: Cold water use only.
Page 203 of 215
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
