Range of in-line flow sensors incorporating either brass (type 230, 235 & 236) or plastic (type 200 & 210) bodies & EPDM ‘O’-rings. Maximum working pressure 12.0 Bar Maximum operating temperature 100.0°C
Range of self-priming electric booster pumps with plastic bodies incorporating plastic impellers with variable speed settings, and a non-return return valve (not suitable for backflow protection). Maximum working pressure 4.5 Bar Maximum operating temperature 50.0°C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 26.569.000 | Chrome | 1/2" BSP (F) | Open Outlet bar | 65 °C | Grohe | faceplate | No |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| S015* | Various | 1/2" BSP (F) | For open outlet use only bar | 85 °C | WINSDRUM | On back plate | No | Not applicable | Not Applicable | Not Applicable | |
| S016* | Various | 1/2" BSP (F) | For open outlet use only bar | 85 °C | WINSDRUM | On back plate | No | Not applicable | Not Applicable | Not Applicable | |
| S017* | Various | 1/2" BSP (F) | For open outlet use only bar | 85 °C | WINSDRUM | On back plate | No | Not applicable | Not Applicable | Not Applicable | |
| S018* | Various | 1/2" BSP (F) | For open outlet use only bar | 85 °C | WINSDRUM | On back plate | No | Not applicable | Not Applicable | Not Applicable | |
| S019* | Various | 1/2" BSP (M) | For open outlet use only bar | 85 °C | WINSDRUM | On body | No | Not applicable | Not Applicable | Not Applicable | |
| S020* | Various | 1/2" BSP (M) | For open outlet use only bar | 75 °C | WINSDRUM | On body | No | Not applicable | Not Applicable | Not Applicable | |
| S021* | Various | 1/2" BSP (M) | For open outlet use only bar | 85 °C | WINSDRUM | On body | No | Not applicable | Not Applicable | Not Applicable | |
| S022* | Various | 1/2" BSP (M) | For open outlet use only bar | 85 °C | WINSDRUM | On body | No | Not applicable | Not Applicable | Not Applicable |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| S34011 | Chrome plated | 1/2" BSP (M) | For open outlet use only bar | 75 °C | DOMOO | Body | No | ||||
| S06041 | Chrome plated | 1/2" BSP (M) | For open outlet use only bar | 75 °C | DOMOO | Body | No | ||||
| S185015(88500103) | Chrome plated | 1/2" BSP (M) | For open outlet use only bar | 65 °C | DOMOO | Body | No |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 13.20302.G15.CP5R-8510 | ½” BSP (M) | 16 bar | 85 °C | V&G,WRAS,1/2,MMYY | BODY | No | Rising spindle | Open Outlet | |||
| 13.20302.G20.CP5R-8510 | ¾” BSP (M) | 16 bar | 85 °C | V&G,WRAS,3/4,MMYY | BODY | No | Rising spindle | Open Outlet | |||
| 13.20302.G15.CP5R-8511 | ½” BSP (M) | 16 bar | 85 °C | V&G,WRAS,1/2,MMYY,CR | BODY | No | Rising spindle | Open Outlet | |||
| 13.20302.G20.CP5R-8511 | ¾” BSP (M) | 16 bar | 85 °C | V&G,WRAS,3/4,MMYY,CR | BODY | No | Rising spindle | Open Outlet | |||
| 13.20362.G15.CP5R-8511 | ½” BSP (M) | 16 bar | 85 °C | V&G,WRAS,1/2,MMYY,CR | BODY | No | Rising spindle | Open Outlet |
Wall Mounted Undefinable air gap see IRNs Incorporates approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Range of ‘THINK-A-FLEX’, EPDM lined, stainless steel braided flexible hose assemblies incorporating various end connections Maximum working pressure: 10 BAR Maximum operating temperature: 65°C
Excelsior Range of Direct and indirect unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar @ 90˚C. The product is supplied with an inlet control group (safety kit) consisting of a pressure reducing valve pre-set at 3.0 bar, strainer, an expansion relief valve set at 6.0 bar and a check valve cartridge (verified by test - suitable for backflow protection against Fluid Category 2). A tundish and expansion vessel are also provided Maximum working pressure: 5.5 Bar (All Circuits) Maximum operating temperature 90.0°C
Rinnai range of Direct and indirect unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar @ 90˚C. The product is supplied with an inlet control group (safety kit) consisting of a pressure reducing valve pre-set at 3.0 bar, strainer, an expansion relief valve set at 6.0 bar and a check valve cartridge (verified by test - suitable for backflow protection against Fluid Category 2). A tundish and expansion vessel are also provided Maximum working pressure: 5.5 Bar (All Circuits) Maximum operating temperature 90.0°C
Range of 2, 3 and 4 port manifold assemblies with either DRZ brass (3834.1, 3834.34, 3835.34, 3835.1, 3837.37 & 3837.1) or brushed chrome plated brass bodies incorporating screw down isolation valves with dome type operating members at each of the outlets. Maximum working pressure: 16 Bar. Maximum operating temperature: 95°C.
Wall mounted, concealed, thermostatic blending valve incorporating a thermostatic cartridge with a dome operating member and supplied with a trim set. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Combined temperature and pressure relief valves with a DZR brass body, pre-set at 7.0, 10.0 or 15.0 bar. Maximum working pressure See models Maximum operating temperature 90.0°C
Range of BOSS 958 combined pre-set temperature and pressure relief valves incorporating Bronze body, DZR brass seat and plunger, EPDM ‘O’-rings, PTFE seal and silicone diaphragm. The valves incorporate a manually operated lever easing gear. The valves are factory pre-set between 0.7 bar and 12.5 bar. Maximum operating temperature 90°C. Maximum working pressure between 0.7 bar and 12.5 bar. Maximum operating temperature 90.0°C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D22P-1D | 22mm | 16 bar | 85 °C | MS, D22-1D | Body | No | |||||
| D26P-3 | 26mm | 16 bar | 85 °C | MS, D26P-3 | Body | No | |||||
| D26P-3B | 26mm | 16 bar | 85 °C | MS, D26P-3B | Body | No | |||||
| D26P-3FY | 26mm | 16 bar | 85 °C | MS, D26P-3FY | Body | No | |||||
| D28P-3B2 | 28mm | 16 bar | 85 °C | MS, D28P-3B2 | Body | No | |||||
| D28P-3B3 | 28mm | 16 bar | 85 °C | MS, D28P-3B3 | Body | No | |||||
| D28P-3D2 | 28mm | 16 bar | 85 °C | MS, D28P-3D2 | Body | No | |||||
| D28P-6 | 28mm | 16 bar | 85 °C | MS, D28P-6 | Body | No | |||||
| D40P-19A | 40mm | 16 bar | 85 °C | MS, D40P-19A | Body | No | |||||
| D40P-19B2 | 40mm | 16 bar | 85 °C | MS, D40P-19B2 | Body | No | |||||
| D56P-1 | 56mm | 16 bar | 85 °C | MS, D56P-1 | Body | No | |||||
| D56P-2 | 56mm | 16 bar | 85 °C | MS, D56P-2 | Body | No | |||||
| D56P-3 | 56mm | 16 bar | 85 °C | MS, D56P-3 | Body | No |
Range of DZR brass and nickel plated DZR brass pressure reducing valves with a pressure gauge connection. Compression connection to be used with copper pipe EN1057. Outlet pressures adjustable between 1.5 & 7.0 bar (pre-set at 3.0 bar). Maximum working pressure 16.0 bar. Maximum operating temperature of 85°C.
Range of normally open or closed solenoid valves with brass bodies. Maximum working pressures: SCE210C034BW, SCE210C035BW: AC only 9.0 bar. SCE210C094BW, SCE210D095BW: AC 9.0 bar, DC 3.0 bar. Maximum operating temperature: 85°C
Range of lever or butterfly operated spherical valves with brass or nickel plate bodies and ball, (DZR brass body and ball on 40 bar models). Maximum working pressure: Various – see model section. Maximum operating temperature 99.0°C
Range of in line spherical valves incorporating chrome plated brass bodies, chrome plated brass ball. Model 825212 & 803815 incorporate a single lever operating member, models 825015 and 8250152 have no operating members. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of inlet control groups with DZR brass bodies consisting of an in-line, adjustable pressure reducing valve (adjustable in the range of 1.0 bar to 6.0 bar, pre-set at 3.0 bar), a pressure relief valve (6.0 bar) and an approved single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). For use with copper pipe (manufactured to BS EN 1057). Maximum working pressure 16 Bar Maximum operating temperature 85°C
Range of inline magnetic or electrolytic scale inhibitors with copper or bodies, for use with copper pipe (manufactured to BS EN 1057). Maximum working pressure 8.0 bar. Electrolytic models have a maximum operating temperature of 40°C. Magnetic models are cold water use only.
Page 154 of 160
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
