'PPE HY3140GYellow' & 'PPE HY3140GBlack'. Yellow or black coloured, injection moulded PPE materials. For use with water up to 85°C.
'PSX 34 Epoxy adhesive'. Site applied, two-part Epoxy adhesive/sealant comprising of a black coloured paste and grey coloured paste, supplied as a pre-weighed kit. Mix, apply and cure as per manufacturer’s TDS ‘ADH4710ENG_PotableWater Feb 2026’. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'PSX 60 Epoxy adhesive'. Site applied, two-part Epoxy adhesive/sealant comprising of a black coloured paste and grey-white coloured paste, supplied as a pre-weighed kit. Mix, apply and cure (refer to Minimum Joint Cure Time) as per manufacturer’s TDS ‘ADH4720ENG_PotableWater Feb 2026’. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Weld-On 747 PVC Cement'. Blue coloured solvent cement. Apply as per manufacturer's PDS '747-05-2025'. Cure for 4 hours@5°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Weld-On 795 Clear PVC Cement'. Clear solvent cement. Apply as per manufacturer's PDS '795-05-2025'. Cure for 4 hours@5°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Weld-On® 795™ Blue PVC Cement'. Blue coloured solvent cement. Apply as per manufacturer's Product Data Sheet '795-05-2025'. Cure for 4 hours@5°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Weld-On ® 319 PVC Cement'. Clear solvent cement. Apply as per manufacturer's Product Data Sheet '319-05-2025'. Cure for 4 hours@5°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Weld-On® 779™ ABS Solvent Cement'. Grey coloured solvent cement. Apply as per manufacturer's Product Data Sheet '779-05-2025'. Cure for 4 hours@5°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
Range of BS1212-4 (2016) compact type float operated valves for WC flushing cisterns, with bottom entry. The inlet incorporates a plastic strainer. Maximum working pressure 10.0 Bar Cold Water Use Only
Range of side entry BS1212-4 (2016), delayed action or non-delayed action type float operated valves for WC flushing cisterns. The inlet incorporates an optional flow restrictor. Maximum working pressure 10.0 Bar Maximum operating temperature Cold water use only.
Side entry BS1212-4 (2016) compact type float operated valve with delayed action for WC flushing cisterns. The inlet incorporates a flow restrictor. Maximum working pressure 10.0 Bar Cold water use only.
Range of bottom entry BS1212-4 (2016) compact type float operated inlet valve for WC flushing cisterns, delayed fill with a plastic body and a plastic flow regulator at the inlet. Maximum working pressure 10.0 Bar Cold water use only
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| F9009K-** | Various | BSP 3/4" (M) | 10 bar | 85 °C | LAN BIAO | Spout | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | Interconnecting Hoses, |
** denotes finish: No Suffix = Chrome, H = Black, DYB = Matte white, BZ = Perl white painted, HGTS = Red bronze, HTL = Yellow bronze brushed, Q = Bronze, QTSL = Bronze brushed bright, QTS = Bronze brushed matte, STS = Acid copper brushed, SDMGJ = Water plated rose gold, N = Nickel brushed bright light, NP = Nickel brushed, TJ = Titanium gold, TJLS = Titanium gold brushed, G = Gold, GJS = Gold brushed, GJSY = Zirconium gold wire drawing matte, PGJFY = Zirconium gold wire drawing matte bright light, PLSJ = Brushed gold, LSJY = Brushed gold matte, MGJ = Rose gold, MGJL = Rose gold brushed, DMGJ = Light rose gold brushed, HTS = Red bronze brushed, QHP = Grey, LSQH = Grey brushed, LHMGJ = Brushed yellow rose gold.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| H23B1 | Chrome plated | ½” BSP (F) conical nut x ½” BSP(F) nut | Open outlet use only bar | 65 °C | JETOM, WRAS | Ferrule | No | ||||
| H23GF | Chrome plated | ½” BSP (F) conical nut x ½” BSP(F) conical nut | Open outlet use only bar | 65 °C | JETOM, WRAS | Ferrule | No |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| JD-744* ** | Various | BSP 1/2" (M) | Open outlet use only bar | 60 °C | Kind | Handle | No | Not applicable | Not Applicable | Open Outlet | Flow Regulator Fitted, Shower Hose, Handset, |
| SJS-200* ** | Various | BSP 1/2" (M) | Open outlet use only bar | 60 °C | Kind | Handle | No | Not applicable | Not Applicable | Open Outlet | Flow Regulator Fitted, Shower Hose, Handset, |
| JD-795* ** | Various | BSP 1/2" (M) | Open outlet use only bar | 60 °C | Kind | Handle | No | Not applicable | Not Applicable | Open Outlet | Flow Regulator Fitted, Shower Hose, Handset, |
| JD-300* ** | Various | BSP 1/2" (M) | Open outlet use only bar | 60 °C | Kind | Handle | No | Not applicable | Not Applicable | Open Outlet | Flow Regulator Fitted, Shower Hose, Handset, |
| JD-798* ** | Various | BSP 1/2" (M) | Open outlet use only bar | 60 °C | Kind | Handle | No | Not applicable | Not Applicable | Open Outlet | Flow Regulator Fitted, Shower Hose, Handset, |
The first * stands for the different handle A, B,C and D, if there is no handle, no first * ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 26.658.000 | Chrome | G 1/2" (M) | Open Outlet bar | 65 °C | Grohe | Body | No |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| GR-AZ-52 | chrome | 1/2 BSP | 10 bar | 75 °C | GUOREN | on body | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | |
| GR-AZ-53 | chrome | 1/2 BSP | 10 bar | 75 °C | GUOREN | on body | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | |
| GR-AZ-51 | chrome | 1/2 BSP | 10 bar | 75 °C | GUOREN | on body | No | Ceramic cartridge | Not Applicable | Not Applicable | |
| GR-LY-10C | chrome | 3/4 BSP | 10 bar | 75 °C | GUOREN | on body | No | Ceramic cartridge | Not Applicable | Not Applicable |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| S009* | Various | 1/2" BSP (M) | 10 bar | 65 °C | WINSDRUM | On body | No | Rotary Cartridge headwork | Not Applicable | Not Applicable | Shower Hose, Handset, Fixed Head, Riser Rail, |
| S011* | Various | 3/4" BSP (F) | 10 bar | 65 °C | WINSDRUM | On cover plate | No | Ceramic cartridge | Not Applicable | Not Applicable | Shower Hose, Handset, Fixed Head, |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| KL-35DS | natural | 35mm | 10 bar | 85 °C | Manufacturer’s logo, WRAS and YYYY/DD/MM | on body | No | Ceramic cartridge | |||
| KL-40DS | natural | 40mm | 10 bar | 85 °C | Manufacturer’s logo, WRAS and YYYY/DD/MM | on body | No | Ceramic cartridge |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| T8015 - 06 - H | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8015 - 06 - C | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8108 - 14 - H | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8108 - 14 - C | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8037 - 05 - H | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8037 - 05 - C | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T81011 - 02 - H | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T81011 - 02 - C | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T81073 - 02 - H | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T81073 - 02 - C | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8001D - 03 - H | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8001D - 03 - C | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8037A - 01 - H | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8037A - 01 - C | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T81022 - 04 - C | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T81022 - 04 - H | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T81071 - 02 - C | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T81071 - 02 - H | Natural | 1/2" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| QT8001B - 02 - C | Natural | 3/4" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| QT8001B - 02 - H | Natural | 3/4" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| QT8231 - 02 - C | Natural | 3/4" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| QT8231 - 02 - H | Natural | 3/4" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T80501 - 05 - H | Natural | 3/4" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T80501 - 05 - C | Natural | 3/4" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8231 - 02 - H | Natural | 3/4" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8231 - 02 - C | Natural | 3/4" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8001B - 02 - H | Natural | 3/4" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk | |||
| T8001B - 02 - C | Natural | 3/4" BSP | 10 bar | 85 °C | SHANHU | on shell | No | 1/4 Turn ceramic disk |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 27HW | 27mm | 10 bar | 65 °C | Yizhan logo | Body | No | |||||
| 27HWX | 27mm | 10 bar | 65 °C | Yizhan logo | Body | No | |||||
| 32HW-LJ | 32mm | 10 bar | 65 °C | Yizhan logo | Body | No |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| K009* | Various | Captive nut G1/2" | 10 bar | 65 °C | WINSDRUM | On body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | Flow Regulator Fitted, |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| K011* | Various | 1/2" Captive nut | 5 bar | 65 °C | WINSDRUM | On body | No | Ceramic cartridge | C-plate | Aerator |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| K001* | Various | 1/2" Captive nut | 5 bar | 65 °C | WINSDRUM | On body | No | Ceramic cartridge | Not Applicable | Aerator | |
| K002* | Various | 1/2" Captive nut | 5 bar | 65 °C | WINSDRUM | On body | No | Ceramic cartridge | Not Applicable | Aerator |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 108-1010 | Chrome plated | 1/2" BSP (F) | 10 bar | 60 °C | CEILSA | Handle | No | Ceramic cartridge | Nut | Aerator | |
| 310-1010 | Chrome plated | 1/2" BSP (F) | 10 bar | 60 °C | CEILSA | Handle | No | Ceramic cartridge | C-plate | Aerator | |
| 365-1010 | Chrome plated | 1/2" BSP (F) | 5 bar | 65 °C | CEILSA | Handle | No | Ceramic cartridge | Nut | Aerator | |
| 220-1010 | Chrome plated | 1/2" BSP (F) | 10 bar | 65 °C | CEILSA | Handle | No | Ceramic cartridge | Nut | Aerator | |
| 108-1080 | Chrome plated | 1/2" BSP (F) | 10 bar | 60 °C | CEILSA | Handle | No | Ceramic cartridge | Nut | Aerator | |
| 310-1080 | Chrome plated | 1/2" BSP (F) | 10 bar | 60 °C | CEILSA | Handle | No | Ceramic cartridge | C-plate | Aerator | |
| 365-1080 | Chrome plated | 1/2" BSP (F) | 5 bar | 65 °C | CEILSA | Handle | No | Ceramic cartridge | Nut | Aerator | |
| 220-1080 | Chrome plated | 1/2" BSP (F) | 10 bar | 65 °C | CEILSA | Handle | No | Ceramic cartridge | Nut | Aerator |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3320-** | Various | 1/2" BSP (F) | 5 bar | 65 °C | CARLOTA | Handle | No | Ceramic cartridge | C-plate | Aerator | |
| 3188-** | Various | 1/2" BSP (F) | 5 bar | 65 °C | CARLOTA | Handle | No | Ceramic cartridge | C-plate | Aerator | |
| 3313-** | Various | 1/2" BSP (F) | 5 bar | 65 °C | CARLOTA | Handle | No | Ceramic cartridge | C-plate | Aerator | |
| 3322-** | Various | 1/2" BSP (F) | 5 bar | 65 °C | CARLOTA | Handle | No | Ceramic cartridge | C-plate | Aerator | |
| 3322A-** | Various | 1/2" BSP (F) | 5 bar | 65 °C | CARLOTA | Handle | No | Ceramic cartridge | C-plate | Aerator | |
| 3322B-** | Various | 1/2" BSP (F) | 5 bar | 65 °C | CARLOTA | Handle | No | Ceramic cartridge | C-plate | Aerator | |
| 3274-** | Various | 1/2" BSP (F) | 5 bar | 65 °C | CARLOTA | Handle | No | Ceramic cartridge | C-plate | Aerator | |
| 3271-** | Various | 1/2" BSP (F) | 5 bar | 65 °C | CARLOTA | Handle | No | Ceramic cartridge | C-plate | Aerator |
Where ** represents finish and can be replaced by: CR = Chrome plated, MB = Matt black， BB = Brushed brass， BN = Brushed nickel, GM = Gun Metal
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P10000921 | Chrome plated | ⅜" captive nut | 7 bar | 60 °C | duschy | Rear of body | No | Ceramic cartridge | C-plate | Aerator | |
| P10000923 | Chrome plated | ½" captive nut | 7 bar | 60 °C | duschy | Rear of body | No | Ceramic cartridge | C-plate | Aerator | |
| DS01-B-3/8 | Matt black | ⅜" captive nut | 7 bar | 60 °C | duschy | Rear of body | No | Ceramic cartridge | C-plate | Aerator | |
| DS01-B-1/2 | Matt black | ½" captive nut | 7 bar | 60 °C | duschy | Rear of body | No | Ceramic cartridge | C-plate | Aerator |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 5301* | Various | ½" captive nut | 10 bar | 65 °C | LUSSO | On body | No | 1/4 Turn ceramic disk | C-plate | Aerator | |
| 5301H* | Various | ½" captive nut | 10 bar | 65 °C | LUSSO | On body | No | 1/4 Turn ceramic disk | C-plate | Aerator |
* denotes finish and can be replaced by: C - Chrome, RG - Rose Gold, BTG - Brushed Titanium gold, BZG - Brushed Zirconium gold, BRG - Brushed Rose gold, MW - Matte white, BS - Brushed stainless, BN - Brushed nickel, PN - Polished nickel, GM - Gunmetal, B - Matte black, TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Wastes | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VAL2 BAS FL4.5 C CD | Chrome | ½” BSP (M) | 5 bar | 65 °C | Bristan | Operating member | No | 1/4 Turn ceramic disc | C-plate | Aerator | Pop Up | Flow Regulator Fitted, |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 61402 | Chrome plated | 1/2'' BSP (F) | 10 bar | 60 °C | Bokeya | Body | No | 1/4 Turn ceramic disc | C-plate | Flow Straightener | |
| 61102 | Chrome plated | 1/2'' BSP (F) | 10 bar | 60 °C | Bokeya | Body | No | 1/4 Turn ceramic disc | C-plate | Flow Straightener |
Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model), incorporating either a ceramic cartridge headwork or ceramic disc headworks with various operating members (see model). The spout outlet of some models incorporates a plastic aerator (specific models only - see model). Maximum working pressure 5.0 bar. Maximum temperature 65°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MA3590 | chrome | 3/8" BSP | 10 bar | 60 °C | GAOAO | on back of body | No | Ceramic Cartridge | C-plate | ||
| MA3590P | black | 3/8" BSP | 10 bar | 60 °C | GAOAO | on back of body | No | Ceramic Cartridge | C-plate | ||
| MA3591 | chrome | 3/8" BSP | 10 bar | 60 °C | GAOAO | on back of body | No | Ceramic Cartridge | C-plate | ||
| MA3591PC | black | 3/8" BSP | 10 bar | 60 °C | GAOAO | on back of body | No | Ceramic Cartridge | C-plate | ||
| MA3592 | chrome | 3/8" BSP | 10 bar | 60 °C | GAOAO | on back of body | No | Ceramic Cartridge | C-plate | ||
| MA3594 | chrome | 3/8" BSP | 10 bar | 60 °C | GAOAO | on back of body | No | Ceramic Cartridge | C-plate | ||
| MA3594P | black | 3/8" BSP | 10 bar | 60 °C | GAOAO | on back of body | No | Ceramic Cartridge | C-plate | ||
| MA3594PC | black | 3/8" BSP | 10 bar | 60 °C | GAOAO | on back of body | No | Ceramic Cartridge | C-plate |
Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes) incorporating quarter turn ceramic disc headworks with hand wheel operating members (ZA1145SG model) or a ceramic cartridge headwork with a single lever operating member (all other models). The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
A range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is also supplied with an alternative spout outlet that incorporates a plastic flow straightener and a stainless-steel strainer. The products are supplied with a loose brass ½” BSP (M) x ½” BSP (F) adaptor for installation on the cold inlet. This adaptor incorporates a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum working temperature 60°C.
Single hole, single outlet (swivel) combination tap assemblies with brass bodies, various finishes, incorporating quarter turn ceramic disk headworks with a single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| DL1600 | Various | ½" BSP (F) | 10 bar | 65 °C | LUSSO | On wall plate | No | 1/4 Turn ceramic disk | Not Applicable | Aerator | |
| DL16011-1 | Various | ½" BSP (F) | 10 bar | 65 °C | LUSSO | On water outlet | No | 1/4 Turn ceramic disk | Not Applicable | Aerator |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 517720 - DARAS TP HP CHR MIXER TAP 3/8" | Chrome (CHR) | 3/8" | 5 bar | 60 °C | BLANCO | body | Yes | Ceramic cartridge | C-plate | Aerator | |
| 523286 - DARAS TP HP CHR MIXER TAP | Chrome (CHR) | 1/2" | 5 bar | 60 °C | BLANCO | body | Yes | Ceramic cartridge | C-plate | Aerator | |
| 526360 - DARAS TP HP 3L CHR MIXER TAP | Chrome (CHR) | 1/2" | 5 bar | 60 °C | BLANCO | body | Yes | Ceramic cartridge | C-plate | Aerator | Flow Regulator Fitted, |
| 526361 - DARAS TP HP 6L CHR MIXER TAP | Chrome (CHR) | 1/2" | 5 bar | 60 °C | BLANCO | body | Yes | Ceramic cartridge | C-plate | Aerator | Flow Regulator Fitted, |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2044-XX | Various | ¾” BSP (M) | 10 bar | 60 °C | CARLOTA | Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 2034-XX | Various | ¾” BSP (M) | 10 bar | 60 °C | CARLOTA | Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 2033-XX | Various | ¾” BSP (M) | 10 bar | 60 °C | CARLOTA | Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 2032-XX | Various | ¾” BSP (M) | 10 bar | 60 °C | CARLOTA | Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 2031-XX | Various | ¾” BSP (M) | 10 bar | 60 °C | CARLOTA | Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator |
1.For the series 2044-XX,2034-XX,2033-XX,2032-XX,2031-XX, the only difference is handle style. 2.XX represent different finishes and can be replaced by CR =Chrome, MB=Matte black, BB=Brushed brass,BN=Brushed nickel,GM=Gun Metal.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2118-XX | Various | ¾” BSP (M) | 10 bar | 60 °C | CARLOTA | Body | No | Ceramic cartridge | Metal Backnuts |
XX represent different finishes and can be replaced by CR =Chrome, MB=Matte black, BB=Brushed brass,BN=Brushed nickel,GM=Gun Metal.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TPASHBAFILL3 | Chromed | BSP 3/4" (M) | 10 bar | 65 °C | Lecico | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator |
Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies, (brass bodies, various finishes - see model), incorporating a ceramic cartridge headworks with either a single lever operating member, supplied with Stainless steel braided PEX lined flexible hose assemblies. In some models the spout outlet incorporates a plastic aerator (see model). Maximum working pressure 10.0 bar. Maximum temperature 65°C.
Non-metallic materials and components comply with BS6920 at 65°C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 61405 | Chrome plated | 3/4'' BSP (M) | 10 bar | 60 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 61105 | Chrome plated | 3/4'' BSP (M) | 10 bar | 60 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 51505 | Chrome plated | 3/4'' BSP (M) | 10 bar | 60 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator |
Range of wall mounted two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a 2-way ceramic disc diverter headwork, with cubed/lever type operating members, diverting between the spout outlet and a shower outlet. The temperature is controlled independently via a thermostatic cartridge with a manual override button and cubed/lever type operating members. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| S006* | Various | 3/4”x1/2” offset unions | 10 bar | 65 °C | WINSDRUM | On body | No | 1/4 Turn ceramic disc | Not Applicable | Aerator | Shower Hose, Handset, |
| S007* | Various | captive nut G1/2" | 10 bar | 65 °C | WINSDRUM | On body | No | 1/4 Turn ceramic disc | Not Applicable | Aerator | Shower Hose, Handset, |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
Range of two hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is also supplied with an alternative spout outlet that incorporates a plastic flow straightener and a stainless-steel strainer. This product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum working temperature 60°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| QST DSM C | Chrome (Cr6) | 1/2" BSP (M) | 5.0 bar | 65 °C | Bristan | Plinth | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| RP3 QST DSM C | Chrome (Cr3) | 1/2" BSP (M) | 5.0 bar | 65 °C | Bristan | Plinth | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 61401 | Chrome plated | 3/4'' BSP (M) | 10 bar | 60 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 61101 | Chrome plated | 3/4'' BSP (M) | 10 bar | 60 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 51501AQ | Chrome plated | 3/4'' BSP (M) | 10 bar | 60 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 5302* | Various | 1/2" BSP (F) | 10 bar | 65 °C | LUSSO | on spout | No | 1/4 Turn ceramic disk | Not Applicable | Aerator | |
| CRS014* | Various | 1/2" BSP (F) | 10 bar | 65 °C | LUSSO | on Rosette | No | 1/4 Turn ceramic disk | Not Applicable | Aerator |
*denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 53110* | Various | ½" captive nut | 10 bar | 65 °C | LUSSO | On base of spout | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | Interconnecting Hoses, |
| CRS013* | Various | ½" captive nut | 10 bar | 65 °C | LUSSO | On base of spout | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | Interconnecting Hoses, |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
Filling valve with a DZR brass body comprising of: Two check valve cartridges on the inlet, verified by test (suitable for backflow protection against Fluid Category 3), a pressure reducing valve preset at 1.4 bar, a sprung loaded self-closing valve and a single check valve cartridge on the outlet, verified by test (suitable for backflow protection against Fluid Category 2). There is a drain port below the self-closing valve chamber. Compression connections are for use with copper pipe (manufactured to EN 1057). Maximum inlet supply pressure 10.0 bar. Maximum operating temperature 100°C.
Page 127 of 131
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
