Non-verifiable single check valve assembly with a stainless-steel body. Maximum working pressure 10.0 bar. Maximum operating temperature of 85°C.
Range of tundishes incorporating a plastic or coated, mild steel body. Maximum operating temperature 85°C.
Undercounter boiling water cistern with a stainless steel body, stainless steel element and silicone ‘O’-rings and gaskets. Maximum working pressure 8.0 bar. Maximum operating temperature 95°C.
Undercounter boiling water cistern with a stainless steel body, stainless steel element and silicone ‘O’-rings and gaskets. Maximum working pressure 8.0 bar. Maximum operating temperature 95°C.
Undercounter boiling water cistern with a stainless steel body, stainless steel element and silicone ‘O’-rings and gaskets. Maximum working pressure 8.0 bar. Maximum operating temperature 95°C.
Undercounter boiling water cistern with a stainless steel body, stainless steel element and silicone ‘O’-rings and gaskets. Maximum working pressure 8.0 bar. Maximum operating temperature 95°C.
Single hole, bidet combination tap assembly (stainless steel body -various finishes) incorporating a fixed spout with swivel nozzle. The products incorporate a ceramic cartridge headwork with single lever operating member and the spout outlets a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Two-hole, single outlet combination tap assembly with stainless steel body incorporating a ceramic cartridge headworks with lever operating members and a pull-out handset.. The spout inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates plastic aerator Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Single hole, single outlet (fixed) combination tap assembly with a brushed stainless-steel body, incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) combination tap assemblies (brass or stainless steel body - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The HV3 model is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 65 °C.
Range of single hole, single outlet (fixed) combination tap assemblies, (brass bodies – various finishes). Model WJ IX008A has a stainless-steel body. Incorporating a ceramic cartridge headworks with single lever operating members. Models WJ 6181000XX & WJ 6181700XX have dome type operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C
Range of single hole, metal, single outlet (swivel) also with end swivel spout, combination tap assembly (brass or stainless steel body - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of single hole, metal, single outlet (swivel) also with end swivel spout, combination tap assembly (brass or stainless steel body - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Single hole, single outlet (swivel) combination tap assembly (stainless steel body - various finishes, see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator with an integral flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Single hole, single outlet (swivel) combination tap assembly (stainless steel body), incorporating quarter turn ceramic disk headworks. The spout outlet incorporates a plastic aerator Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.
Single hole, single outlet (swivel) combination tap assembly (stainless steel body) incorporating a ceramic cartridge headwork with single lever type operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Single-hole, single outlet (swivel) combination tap assembly, (stainless steel body - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Ramge of deck mounted, two-hole, single outlet (fixed) combination tap assemblies (stainless steel body – various finishes) incorporating a ceramic cartridge headwork with single lever operating members. The products are supplied with nylon braided, PEX lined flexible interconnecting hoses and the spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of floor mounted, two-hole, single outlet (swivel) combination tap assemblies (stainless steel and brass bodies various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 Bar Maximum operating temperature 70.0°C
Two hole, double outlet swivel combination tap assembly ( stainless steel body) incorporating ceramic cartridge headworks with lever type operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts. The spout incorporates a mixed hot water outlet and separate outlet intended to be supplied by an instantaneous water heater (not included on this approval) to dispense near boiling water. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
Two hole, double outlet swivel combination tap assembly ( stainless steel body) incorporating ceramic cartridge headworks with lever type operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts. The spout incorporates a mixed hot water outlet and separate outlet intended to be supplied by an instantaneous water heater (not included on this approval) to dispense near boiling water. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
Range of wall mounted spout outlets with either stainless steel or brass bodies (various finishes - see model), incorporating a plastic aerator and EPDM ‘O’-rings. Maximum working temperature 60°C.
Range of wall mounted spout outlets incorporating chrome plated brass bodies (model F2929.WR & F2418.WR) or a stainless-steel body (model F2944INOX.WR). The outlets incorporate a plastic flow straightener (model F2929.WR) or a plastic aerator (models F2418.WR & F2944INOX.WR) Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of deck mounted spout outlets incorporating chrome plated brass body (model F2158.WR) or a stainless-steel body (model F2943INOX.WR). The outlets incorporate a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted spout outlets incorporating chrome plated brass bodies (models CPHSP2929, ZCPHSP2929, CPHMA2418 & ZCPHMA2418) or a stainless-steel body (models CPHSP2944SS & ZCPHSP2944SS). The outlets incorporate a plastic flow straightener (models CPHSP2929 & ZCPHSP2929) or a plastic aerator (models CPHMA2418, ZCPHMA2418, CPHSP2944SS & ZCPHSP2944SS) Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of deck mounted spout outlets incorporating chrome plated brass body (models CPHSP2158 & ZCPHSP2158) or a stainless-steel body (models CPHSP2943SS & ZCPHSP2943SS). The outlets incorporate a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Expansion vessels incorporating a stainless steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 100˚C.
Expansion vessels incorporating a stainless steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 100˚C.
Expansion vessel with stainless steel body and butyl membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C
Range of mini shock arrestors with a stainless steel body. Models with compression connections are for use with copper tube (manufactured to EN 1057). Maximum working pressure 10.0 or 15.0 bar (please refer to model). Maximum operating temperature 70°C.
Mini shock arrestor with a stainless steel body. Maximum working pressure 15.0 bar . Maximum operating temperature 70°C.
Mini shock arrestors with a stainless steel body. Maximum working pressure 15.0 bar. Maximum operating temperature 70°C.
Shock arrestor with stainless steel body. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C
Expansion vessel with a stainless-steel body. Maximum working pressure 15.0 bar. Maximum operating temperature 100°C.
TY-11 & TY-03 ranges of expansion vessels. The TY-11 range has an epoxy coated carbon steel body and the TY-03 range has a stainless-steel body. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.
Expansion vessel with a carbon steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Shock arrestor with stainless steel body and EPDM diaphragm. Maximum working pressure 15.0 bar. Maximum operating temperature 100°C.
102606 Mini shock arrestors with a stainless steel body. Maximum working pressure 15.0 bar. Maximum operating temperature 70°C.
Non-metallic materials and components comply with BS6920 at 85°C
Expansion vessel with a carbon steel body, polypropylene cover and a butyl membrane. Maximum working pressure: 10 Bar. Maximum operating temperature: 99°C.
Expansion vessels incorporating a stainless-steel body and SEFA membrane. Maximum working pressure: 10 bar, except A2C2R27 WR000 (DP 24/16X) 1” BSPP (M) which is 16 bar. Maximum operating temperature 85˚C.
AQUASYSTEM Expansion Vessels with a carbon steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Expansion vessels incorporating a stainless steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 100˚C.
Range of water filters comprising of a carbon block cartridge and head, for use with LLDPE tube (manufactured to DIN 8072). Model K2-S has a stainless steel body and head, all other models are plastic. Maximum working pressure 6.0 bar. Cold water use only.
Single low-level horizontal mount float switch with stainless-steel body and float. Maximum operating temperature 100°C.
Range of direct gas fired condensing water heaters with a stainless steel body. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.
Range of direct gas fired condensing water heaters with a stainless steel body. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.
Range of ultrasonic remote transmission water meters with stainless steel body. The products incorporate a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Range of ultrasonic water meters incorporating a stainless steel body, temperature sensor, pressure sensor and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Biofilm and water quality monitor incorporating a stainless-steel body and silicon seals. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Flow meter with stainless steel body. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Page 1 of 3
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
