Directory Search Results

Print List

#250402055

Range of wall and ceiling mounted overhead shower outlets, (plastic bodies – various finishes). Both models incorporate a built-in pressure regulator. Maximum operating temperature 85°C. Open outlet use only

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250402055
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2” BSP M.
Marking:
GROHE logo on showerhead.
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
22121xxx - Grohe Rainshower Mono 310. Head shower set 422 mm, 1 spray. 22122xxx - Grohe Rainshower Mono 310. Head shower set ceiling 142 mm, 1 spray. Where xxx denotes finish, and can be replaced by the following: 000 – Chrome KF0 – phantom black

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#250404021

Range of deck mounted pull out kits (various finishes) comprising of a shower handset, shower hose and a stainless steel braided silicone lined connecting hose. The shower handsets incorporate single check valve cartridges, however, the complete product has not been fully tested to demonstrate backflow protection. Maximum operating temperature: 60°C. Open outlet use only.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250404021
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only.
Size:
½” BSP (F) Captive nut flexi hose S/S
Marking:
Gessi on mounting plate.
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
47227 EXTRACTABLE SHOWER AND BATH EDGE 47127 EXTRACTABLE SHOWER AND BATH EDGE

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#251002001

Range of wall mounted brass shower outlets in various finishes. Open outlet use only. Maximum operating temperature: 65°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
251002001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4" BSP (M).
Marking:
Vola on base plate
Installation Requirements:
R001 R040
Expiry date:
31/10/2030
Model:
VOLA 080ST-XX, VOLA 080ST+100-XX, VOLA 080ST+200-XX, VOLA 080ST-100-XX. Model VOLA 080ST-XX, VOLA 080ST-100-XX, VOLA 080ST+100-XX and VOLA 080ST+200-XX made in Brass or stainless steel material are available with the different surface finish. Suffix “XX” indicate the number of surface finish and denotes For Brass: 02=Grey, 04=Light Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Polished Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 66=Dark Gold, 68=Silver, B61=Brushed Black, B64=Brushed copper, B69=Brushed Silver, B70=Brushed Gold. For Stainless Steel: 40=Brushed Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold, 71=Brushed Dark Copper.

Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846

View All Listings by this Company

Print This Approval


#250408017

Range of Y patterned strainers with a brass body. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1715 Strainers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” to 2” BSP/BSPT (F) x (F)
Marking:
Conex, size, PN rating and flow arrow on body. Conex Universal Ltd and size on data label.
Installation Requirements:
R001 R120
Expiry date:
30/04/2030
Model:
IDC 180210 series comprising of model codes: 180210RR0160404 180210RR0160606 180210RR0160808 180210RR0161010 180210RR0161212 180210RR0161616 180210FF0160404 180210FF0160606 180210FF0160808 180210FF0161010 180210FF0161212 180210FF0161616

Approval Holder:
Conex Universal Limited
Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company
Manufacturer:
Zheijang IDC Fluid Control.
Company Name
Zheijang IDC Fluid Control.
General Email

View All Listings by this Company

Print This Approval


#250502022

Range of `Y`-patterned strainers with either brass or DZR brass bodies, incorporating a stainless-steel mesh strainer. Maximum working pressure: 25.0 Bar (1SYA Models) or 16.0 Bar (1SYC & 1SYD models) Maximum operating temperature 95°C. Strainers with compression connections are to be used with copper pipe manufacture to BS EN 1057. Strainers with M profile press-fit connections are to be used with copper pipe manufactured to BS EN 1057 & SS304 Stainless steel pipe manufactured to EN 10312.

Section:
1715 Strainers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
SEE MODEL
Marking:
IDC, DN, PN, flow arrow & CR on body CR mark is only present on the DZR models
Installation Requirements:
R001
Expiry date:
31/05/2030
Model:
Brass Thread Y Strainer 1SYA004 ½” BSP (F) inlet x outlet 1SYA006 ¾” BSP (F) inlet x outlet 1SYA008 1” BSP (F) inlet x outlet 1SYA010 1¼” BSP (F) inlet x outlet 1SYA012 1½” BSP (F) inlet x outlet 1SYA014 2” BSP (F) inlet x outlet DZR Brass Thread Y strainer 1SYA104 ½” BSP (F) inlet x outlet 1SYA106 ¾” BSP (F) inlet x outlet 1SYA108 1” BSP (F) inlet x outlet 1SYA110 1¼” BSP (F) inlet x outlet 1SYA112 1½” BSP (F) inlet x outlet 1SYA114 2” BSP (F) inlet x outlet Brass Compression Y strainer 1SYC004 15mm compression inlet x outlet 1SYC006 22mm compression inlet x outlet DZR Brass Compression Y Strainer 1SYC104 15mm compression inlet x outlet 1SYC106 22mm compression inlet x outlet Brass Press-fit Y Strainer 1SYD004 15mm press-fit inlet x outlet 1SYD006 22mm press-fit inlet x outlet 1SYD010 28mm press fit inlet x outlet DZR Brass Press-fit Y Strainer 1SYD104 15mm press-fit inlet x outlet 1SYD106 22mm press-fit inlet x outlet 1SYD110 28mm press fit inlet x outlet

Approval Holder:
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Company Name
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
No.6, Shengyuan Road, Mechanical & Electrical Industrial Zone, Yuhuan City, Zhejiang, Taizhou City, Zhejiang Province, P. R.China
Country
China
General Email

View All Listings by this Company

Print This Approval


#250402038

Range of pressure sensors with stainless steel bodies. Models consist of a sensor and male threaded end. Maximum working pressure: See Models. Maximum operating temperature 90°C.

Section:
1720 Switches
Section Subtitle:
Pressure operated.
WRAS Approval Number:
250402038
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¼” BSP (M)
Marking:
Customer Production Number, Sensata Production Number, Production Date, Location Code, Sensata Mark and pressure range laser etched on cover.
Installation Requirements:
R001
Expiry date:
30/04/2030
Model:
35CP11-15165006YS00H2EC & 35CP11-38165006YS00H2EC: 6 bar, 35CP11-16165109YS00H2EC: 9 bar, 35CP11-11165010YS00H2EC & 35CP11-36165010YS00H2EC:10 bar, 35CP11-12165016YS00H2EC & 35CP11-37165016YS00H2EC: 16 bar, 35CP11-18165025YS00H2EC & 35CP11-39165025YS00H2EC: 25 bar, 35CP11-19165040YS00H2EC & 35CP11-40165040YS00H2EC: 40 bar.

Approval Holder:
Sensata Technologies Holland B.V.
Company Name
Sensata Technologies Holland B.V.
Address
Jan Tinbergenstraat 80, 7559 SP Hengelo (O), The Netherlands

View All Listings by this Company
Manufacturer:
Sensata Technologies ( China) Co., Ltd
Company Name
Sensata Technologies ( China) Co., Ltd
Address
18# Chuang Xin Xinbei District Changzhou
Country
Jiangsu

View All Listings by this Company

Print This Approval


#2112069

Range of drain taps incorporating brass bodies, EPDM seats and washers and a non-rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1770 Taps
Section Subtitle:
Draining, for above ground use only.
WRAS Approval Number:
2112069
Size:
22mm Capillary
Marking:
PB logo and size on body, date of manufacture.
Installation Requirements:
R001 R511
Expiry date:
31/12/2026
Model:
10.1236

Approval Holder:
Bliss UK Group Ltd
Company Name
Bliss UK Group Ltd
Address
Unit 4A Kinsbourne Farm Wick End Stagsden Bedfordshire
Postcode
MK43 8TS
Country
United Kingdom
Phone
01234 860230
General Email
accounts@blissukgroup.co.uk

View All Listings by this Company

Print This Approval


#250402708

Range of Single Layer PPRCT Solid Pipes (SDR7.4) comprising of green coloured PPRCT material. Not approved for use with any fittings. Maximum working pressure 23.4 bar. Cold water above ground use only.

Section:
1840 Tubes
Section Subtitle:
Plastic, cold-water use.
WRAS Approval Number:
250402708
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
SEE MODEL
Marking:
Q-Therm, Size, date of manufacture (DD/MM/YY) and technical info on pipe.
Installation Requirements:
R001
Expiry date:
30/04/2030
Model:
CT17SP2001 – 20x2.8mm CT17SP2002 – 25x3.5mm CT17SP2003 – 32x4.4mm CT17SP2004 – 40x5.5mm CT17SP2005 – 50x6.9mm CT17SP2006 – 63x8.6mm CT17SP2007 – 75x10.3mm CT17SP2009 – 90x12.3mm CT17SP2010 – 110x15.1mm

Approval Holder:
Quantum Industries LLC
Company Name
Quantum Industries LLC
Address
Al Ghail Industrial Park, Ras Al Khaimah, PB 86488
Country
UAE

View All Listings by this Company

Print This Approval


#250404005

Range of stainless steel or polymeric braided, PERT and LDPE lined flexible hose assemblies with EPDM O-rings. Available with a variety of end connections for each size and model. Compression connection to be used with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
250404005
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
TUCAI, NT, WRAS, DN, YY (year of manufacture)
Installation Requirements:
R001 R008
Expiry date:
30/04/2030
Model:
TAQ SLIM DN6 a mix of PERT and LDPE inner flexible hose OD (outer diameter) 8.3mm, stainless steel braided assemblies with a variety of end connections. TAQ SLIM ACB DN6 a mix of PERT and LDPE inner flexible hose OD (outer diameter) 8.3mm, polymeric braided (ACB) assemblies with a variety of end connections TAQ SLIM BB DN6 a mix of PERT and LDPE inner flexible hose OD (outer diameter) 10mm = BB, stainless steel braided assemblies with a variety of end connections TAQ SLIM BB ACB DN6 a mix of PERT and LDPE inner flexible hose OD (outer diameter) 10mm = BB, polymeric braided (ACB) assemblies with a variety of end connections Fittings for all above models: M8X1 M10X1 M11X1 M12X1 M15X1 9/16-24UNEF 1/2-14NPSM G3/8 G1/2 5/16-24UNF LISO6 LISO8 LISO10 CLIP 9 CLIP 10 CLIP 11 BICO8 BICO10

Approval Holder:
Tucai, S.A.
Company Name
Tucai, S.A.
Address
Llobateras, 10-12. Polígono Industrial Santiga, 08210 Barberà del Vallès (Barcelona)
Country
Spain
Phone
+34 93 718 95 62
General Email
info@tucai.com

View All Listings by this Company
Manufacturer:
Ningbo Tucai Flexible Pipe Co., Ltd.
Company Name
Ningbo Tucai Flexible Pipe Co., Ltd.
Address
No. 1 Beixing Road, Mazhu Town Yuyao, Zheijiang, 31450
Country
China
General Email

View All Listings by this Company

Print This Approval


#250804007

Range of flexible hoses assemblies incorporating a braided outer with TPSiV liner and various brass end connections. Maximum operating temperature 85°C. Open outlet use only.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
250804007
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Marking:
FQR , date of manufacture (YY), nominal diameter & WRAS on ferrule.
Installation Requirements:
R001
Expiry date:
31/08/2030
Model:
P6K, P6KL, P6KZ - DN6 available with the following end connection options: 8X1, 10x1, 12X1, 15x1, 14x1, F1/2, F15X1, F14X1, M3/8, F3/8 conical, F1/2 conical & T8. P9K, P9KL, P9KZ - DN8 available with the following end connection options: 10x1, 12X1, 15x1, 14x1, F1/2, F15X1, F14X1, M3/8, F3/8 conical, F1/2 conical & T8.

Approval Holder:
F.Q.R. Frattini S.R.L.
Company Name
F.Q.R. Frattini S.R.L.
Address
Via Per Borgomanero 71 Briga Novarese (No)
Postcode
28010
Country
Italy
Phone
+39 0322 94100
General Email
fqr3@fqrfrattini.com

View All Listings by this Company

Print This Approval


#250412002

Range of stainless steel or nylon braided, PEX lined flexible hose assemblies with various brass end connections. Maximum working pressure 10.0 Bar. Maximum operating temperature 85 °C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
250412002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
Justlink, WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:
R001 R008
Expiry date:
30/04/2030
Model:
JL – A*B – XX – D – 2 – XXX Where model = JL – Connection A * Connection B – DN – Outer braided material – Inner tube material – Length JL = abbreviation of manufacturer’s company name Jianglin. A*B = Connection A and Connection B. XX = DN (Dimension from 06 to 10): DN6 = 06, DN8 = 08, DN10 = 10. D = Outer braided material, SS = stainless steel wire, SN = stainless steel wire plus black nylon wire, N = Nylon Braided. Inner tube material, 2 = PEX XXX = Length (15cm to 200cm) 015 = 15cm … 200 = 200cm For example: JL-09*11-08-SS-2-045 would be for F1/2 x F1/2 elbow, DN8, stainless steel braided, PEX inner tube, 45cm long. DN6 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12‐110) with single O‐ring 20= M10*(12‐110) with single O‐ring 21= M11*(12‐110) with single O‐ring 22= M12*(12‐110) with single O‐ring 24= M15*(12‐110) with single O‐ring 26= F15 29= 10mm compression fitting 30= 12mm compression fitting 31= 15mm compression fitting 33= 15mm isolation valve 35= 10mm pushfit 36= 12mm pushfit 37= 15mm pushfit 39= 10mm pushfit isolation valve 40= 12mm pushfit isolation valve 41= 15mm pushfit isolation valve 45= M8*(12‐110) with double O-ring 46= M10*(12‐110) with double O-ring 47= M11*(12‐110) with double O-ring 48= M12*(12‐110) with double O-ring 50= M15*(12‐110) with double O-ring DN8 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 19= M8*(12‐110) with single O‐ring 20= M10*(12‐110) with single O‐ring 21= M11*(12‐110) with single O‐ring 22= M12*(12‐110) with single O‐ring 24= M15*(12‐110) with single O‐ring 26= F15 29= 10mm compression fitting 30= 12mm compression fitting 31= 15mm compression fitting 33= 15mm isolation valve 35= 10mm pushfit 36= 12mm pushfit 37= 15mm pushfit 39= 10mm pushfit isolation valve 40= 12mm pushfit isolation valve 41= 15mm pushfit isolation valve 45= M8*(12‐110) with double O-ring 46= M10*(12‐110) with double O-ring 47= M11*(12‐110) with double O-ring 48= M12*(12‐110) with double O-ring 50= M15*(12‐110) with double O-ring DN10 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 20= M10*(12‐110) with single O‐ring 21= M11*(12‐110) with single O‐ring 22= M12*(12‐110) with single O‐ring 24= M15*(12‐110) with single O‐ring 30= 12mm compression fitting 31= 15mm compression fitting 33= 15mm isolation valve 35= 10mm pushfit 36= 12mm pushfit 37= 15mm pushfit 39= 10mm pushfit isolation valve 40= 12mm pushfit isolation valve 41= 15mm pushfit isolation valve 46= M10*(12‐110) with double O-ring 47= M11*(12‐110) with double O-ring 48= M12*(12‐110) with double O-ring 50= M15*(12‐110) with double O-ring
Product Images

Approval Holder:
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company

Print This Approval


#241202067

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections. Maximum working pressure: 6.0 bar @ 65°C Maximum working pressure: 12.0 bar @ 20°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
241202067
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
12BAR @ 20°C
Size:
See model
Marking:
Qualflex, QWRAS, 6bar@65°c /12 bar @20°c, DOM (M.YY) stamped on ferrule
Installation Requirements:
R001 R008
Expiry date:
31/12/2029
Model:
(HOSE900001): DN10 x Brass 3/4BSP Female Elbow x Brass 1/2BSP Female straight. (HOSE202105): DN10 x Brass 3/4BPP Female Straight x Brass 3/4BSP Male (HOSE900004): DN10 x Brass 3/8BSP Female Elbow x Brass 1/2BSP Female straight (HOSE202107): DN10 x Brass 3/4BSP Female Elbow x Brass 3/4BSP Female straight. (HOSE265012) : DN10 x Brass 15mm Compression x Brass 3/8NPT Male

Approval Holder:
Reliance Worldwide Corporation (UK)
Company Name
Reliance Worldwide Corporation (UK)
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company
Manufacturer:
Hydralectric Ltd.
Company Name
Hydralectric Ltd.
Address
5 High Road, Byfleet, Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200
General Email
jamie.balkwill@hydralectric.com

View All Listings by this Company
Manufacturer:
Hydralectric Ltd.
Company Name
Hydralectric Ltd.
Address
5 High Road, Byfleet, Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200
General Email
jamie.balkwill@hydralectric.com

View All Listings by this Company

Print This Approval


#250404014

Range of ‘Ridgeline’ stainless steel flexible connectors. Maximum working pressure 6.0 bar. Maximum operating temperature 80°C.

Section:
1870 Tubes
Section Subtitle:
Flexible - Metal.
WRAS Approval Number:
250404014
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model
Marking:
Ridgeline on nut.
Installation Requirements:
R001
Expiry date:
30/04/2030
Model:
FC-CC15-12-300 - 15mm 1/2" Female FC-CC15-12-500 - 15mm 1/2" Female FC-CC22-34-300 - 22mm 3/4' Female FC-CC22-34-500 - 22mm 3/4' Female FC-FM-12-300 - 1/2 Female 1/2" Male FC-FM-12-500 - 1/2 Female 1/2" Male FC-FF-12-300 - 1/2 Female 1/2 Female FC-FF-12-500 - 1/2 Female 1/2 Female FC-FM-34-300 - 3/4" Female 3/4" Male FC-FM-34-500 - 3/4" Female 3/4" Male FC-FF-34-300 - 3/4" Female 3/4" Female FC-FF-34-500 - 3/4" Female 3/4" Female FC-M10-12-5003/4" - M10 1/2' Female FC-M8-12-500 - M18 1/2' Female

Approval Holder:
Flexipipe-Flexigas Ltd
Company Name
Flexipipe-Flexigas Ltd
Address
494, 37 Westminster Buildings, Theatre Square, Nottingham
Postcode
NG1 6LG
Country
United Kingdom

View All Listings by this Company

Print This Approval


#250504006

Range of brass bodied automatic air venting valves incorporating a plastic float. Maximum working pressure 10.0 bar. Maximum operating temperature 110°C

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
250504006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
SEE MODELS
Marking:
L Officine Rigamonti Spa logo (OR), PN, temp & Valmat on body
Installation Requirements:
R001 R200
Expiry date:
31/05/2030
Model:
502.012 3/8” BSP (M) 502.015 ½” BSP(M) 502.020 ¾” BSP (M) 502.024 1” BSP (M)

Approval Holder:
Officine Rigamonti Spa
Company Name
Officine Rigamonti Spa
Address
Via Circonvallazione 9, Officine Rigamonti spa 13018 Valduggia (VC)
Country
Italy
Phone
+39 0163 48 165 Fax: +39 0163347254
General Email
info@officinerigamonti.it

View All Listings by this Company

Print This Approval


#250488008

Range of wall mounted, or concealed manually operated blending valves, (brass bodies – various finishes), incorporating a ceramic cartridge headwork controlling both the flow and temperature with a single lever operating member. Maximum working pressure 5 bar. Maximum operating temperature 85°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
250488008
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm Compression
Marking:
Gainsborough (Part of Aqualisa Group) on body
Installation Requirements:
R001 R010 R040
Expiry date:
30/04/2030
Model:
706124 Valve assembly complete AL206

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#250402020

Range of thermostatic mixing valves with DZR brass bodies. The inlets incorporate a stainless-steel strainer and single check valve cartridge verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10 Bar Maximum operating temperature 85°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250402020
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/8” BSP M inlet/outlet
Marking:
Caleffi logo, CR, flow arrow, H, and, Mix on body
Installation Requirements:
R001
Expiry date:
30/04/2030
Model:
521202, 521202 AQS & 521202 CST

Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#250512002

Range of wall mounted thermostatic bar shower mixers (brass bodies – various finishes) incorporating a ceramic cartridge headwork that controls the flow and diverts form hand shower to overhead shower outlet. The temperature is controlled independently via a thermostatic cartridge with dome or cubed type operating members that incorporate a manual override button. The inlets incorporate approved single check valve cartridges, however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection. Supplied with a hose, handset and overhead shower outlet. Maximum working pressure 10.0 Bar Maximum operating temperature 60 °C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250512002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm Compression
Marking:
Sonas on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/05/2030
Model:
USH0205 USH0206 USH0210 USH0211 USH0212 Model added August 2025 USH0232 (Brushed Gold), USH0283 (Black), USH0284 (Black).

Approval Holder:
Sonas Bathrooms
Company Name
Sonas Bathrooms
Address
103 Northwest Business Park Ballycoolin, Dublin 15
Postcode
D15 R88
Country
Ireland
General Email
2894475300@qq.com

View All Listings by this Company
Manufacturer:
Sonas Bathrooms
Company Name
Sonas Bathrooms
Address
103 Northwest Business Park Ballycoolin, Dublin 15
Postcode
D15 R88
Country
Ireland
General Email
2894475300@qq.com

View All Listings by this Company

Print This Approval


#250404017

Wall mounted concealed two way and three way diverter valve assembly (brass bodies with trim sets in various finishes). The 59556 000070 and 59548 000170 concealed installation units are not approved in their own right. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2050 Diverter
Section Subtitle:
Diverter cartridge(s) with manual adjustment.
WRAS Approval Number:
250404017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
Keuco on wall plate
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
IXMO range: 2-way divetrer: 59557 xxy0zz 2-way stop and diverter valve. Which must be installed in conjunction with the following: 59556 000070 concealed installation unit. 3-way divetrers: 59549 xxy1zz 3-way stop valve & diverter with hose connection, 59549 xxy2zz 3-way stop valve & diverter w. hose connect./shower holder. Both of which must be installed in conjunction with the following: 59548 000170 concealed installation unit. Where xx denotes finish: 01: chrome plated, 02: polished bronze, 03: brushed bronze, 04: polished nickel, 05: brushed nickel; 07: stainless steel finish, 12: polished black chrome, 13: brushed black chrome, 17: aluminium finish, 21: stainless steel finish, 25: brushed brass, 29: brushed red gold, 35: brushed titan black, 37: black matt. y0 = diverter valve without hose connection: 00: Pure handle, without hose connection, 10: Comfort handle, without hose connection). y1 = diverter valve with hose connection: 01: Pure handle, with hose connection, 10: Comfort handle, with hose connection. y2 = diverter valve with hose connection and shower holder: 02: Pure handle, with hose connection and shower holder, 12: Comfort handle, with hose connection and shower holder. zz = different shapes of rosette: z1: Rosette round, z2: Rosette square.

Approval Holder:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36 Hemer
Postcode
58675
Country
Germany
Phone
+49 2372 / 904-265
General Email
info@keuco.de

View All Listings by this Company

Print This Approval


#250408703

1451 series of spring loaded, resilient trim, non-return valves with brass bodies. Maximum working pressure 10.0 bar ½” – 1” and 12.0 bar 1 ¼ - 2”. Maximum operating temperature 85°C.

Section:
2185 Valves
Section Subtitle:
Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. Therefore, not considered suitable for Backflow Protection.
WRAS Approval Number:
250408703
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” – 2” BSP (F x F).
Marking:
Flow arrow, PN, size and Conex on body.
Installation Requirements:
R001
Expiry date:
30/04/2030
Model:
1451 series.

Approval Holder:
Conex Universal Limited
Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company

Print This Approval


#250808701

Range of pressure relief valves with gunmetal bodies and a lever operated easing gear. All have a pre-set pressure, ranging from 1.0 - 12.5 bar. Maximum operating temperature 95°C.

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
250808701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models.
Marking:
NABIC, flow Arrow and size on body. Model and product info on data label.
Installation Requirements:
R001
Expiry date:
31/08/2030
Model:
Fig 500 – ½” – 2 ½” BSP, Fig 500F – DN20 – DN65.

Approval Holder:
Crane Ltd
Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Country
United Kingdom
Phone
01473 277 364
General Email
tturner@cranebsu.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 92 of 124

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.