Wall mounted thermostatic blending valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Both inlets incorporate single check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 2) and a stainless-steel filter. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, concealed, thermostatic shower blending valves with brass bodies (various finishes, operating members and trim kits - SD127 prefix models are available in the following finishes - Chrome (CR), Brushed Black (BBR), Brushed Black, Matt Black (MB). All other models are available in Chrome (CR) finish). The 2500 model variants incorporate a ¼ turn ceramic disc headwork controlling the flow to a single outlet. The 2501 model variants incorporate a 2 way ceramic disc diverter (2 on, 1 off) controlling the flow between two outlets. The 2503 model variants incorporate two ¼ turn ceramic disc headworks controlling the flow to two separate outlets. The 2504 model variants incorporate a 2 way ceramic disc diverter (2 on, 1 off) controlling the flow between two outlets and an additional a ¼ turn ceramic disc headwork controlling the flow to a separate single outlet. In all models the temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of, two way and three way diverter valves incorporating brass bodies The valves are fitted with ceramic disc diverters or headwork, and can be supplied with or without a shutoff valve. Maximum working pressure 20.0 bar. Maximum operating temperature 80°C.
Range of thermostatic regulating valves, with stainless steel bodies and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C
‘GNVP’ range of non-return valves with a black or white plastic housing, (white added October 2024). The product incorporates two test/drainage plugs. Maximum working pressure 16.0 bar. Maximum operating temperature 60°C.
Range of pre-set pressure relief valves with gunmetal bodies, silicon diaphragms, and PTFE seat washers. Pre-set relief pressures: 0.3 bar to 10.5 bar. Maximum operating temperature 95°C.
Range of pressure relief valves with gunmetal bodies, silicon rubber diaphragm, chrome vanadium steel spring and a lever operated easing gear. Pre-set relief pressures: DN15-25 - 1.0 bar to 12.5 bar. DN32-65 - 0.4 bar to 12.5 bar. Maximum operating temperature 95˚C
Range of pre-set (at 3.0 bar) pressure relief valves incorporating DZR brass bodies and an EPDM diaphragm. The valve is fitted with hand operated rotating easing gear. Maximum operating temperature 85°C.
Range of pressure relief valves incorporating brass bodies and EPDM rubber washers. The valves incorporate a manually operated rotational easing gear. For maximum working pressure please refer to model. Maximum operating temperature 99°C.
Range of normally closed solenoid valves with brass bodies & EPDM diaphragms. Maximum working pressure; AC Coil, All – 16.0 bar. DC Coil (14W) 3/4” & 1” – 9.0 bar, ¼”, 3/8” and ½” – 12.0 bar. DC Coil (22W) All – 16.0 bar. Maximum operating temperature 85°C.
Range of latching and non-latching, normally open (L282 models) and normally closed (L182 models) solenoid valves with either brass or stainless-steel bodies. Please refer to model for maximum working pressure. Maximum operating temperature 85°C.
Range of in-line latching solenoid valves with a brass body. Maximum working pressure 12.0 bar (L160P03 1.6mm model) and 9.0 bar (L160P03 2.3mm model). Maximum operating temperature 85°C.
Range of latching and non-latching normally closed solenoid valves with either brass or stainless-steel bodies. Please refer to model for maximum working pressure. Maximum operating temperature 85°C.
Range of normally closed (monostable) and pulse controlled/latching (bistable) solenoid valves with plastic bodies, integral stainless steel strainer, From September 2023 the 50.005.101 model can also be supplied with an integral plastic strainer. EPDM diaphragm, EPDM ‘O’-rings and seals. To be installed in specifically dimensioned bodies. The 50.005.101 model can be supplied with or without a brass adaptor. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of in-line spherical valves (brushed chrome DZR brass body) with lever (250400) or butterfly (250300 & 29284) operating members, DZR brass ball (chromium plated brass) and PTFE seats and washers. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.
Spherical valve intended for use on sanitary inlet / outlet connections on boiler circuits, with a brass body and PTFE seat. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C.
Screwdriver operated angled servicing valve with brass body, brass ball, PTFE seats and EPDM ‘O’-rings. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C.
Range of brass bodied or chrome plated brass bodied spherical valves, with a brass ball and EPDM ‘O’-rings. All fittings are to be used with PE-x pipe (manufactured to BS7291-3), PB pipe (manufactured to BS7291-2) and copper pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of spherical valves incorporating brass bodies (various finishes) with EPDM ‘O’-rings or PTFE seats depending on model variant. Models can be straight or angled. Maximum working pressure 25.0 bar (models 10.61092.015.CP5R-8510 & 10.61092.015.CP12-8510). Maximum working pressure 16.0 bar (all other models). Maximum operating temperature 85°C.
Range of ball valves incorporating brass bodies, stems & balls, PTFE seats and butterfly type or single lever operating members. Maximum working pressure 40.0 bar. Maximum operating temperature 95˚C.
Page 5 of 205
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
