Range of compression fittings with polypropylene bodies for use with PE100 pipe (manufactured to EN 12201). Some of the female adaptors (55920-9-L, 55920-10-L, 55920-11-L & 55920-11-M), female threaded elbows (56935-10-L, 56935-11-L & 56935-11-M) have a maximum working pressure of 10.0 bar. All other models have a maximum working pressure of 16.0 bar. For above and below ground, cold water use.

Section:

1160 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250902025

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

20mm – 110mm. (please note: 20mm-50mm sizes added January 2026).

Marking:

Plastica Alpha logo, size and date of manufacture (MM/YY) on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Blu Line Plus: 53910-8 Coupling ø63 mm 53910-9 Coupling ø75 mm 53910-10 Coupling ø90 mm 53910-11 Coupling ø110 mm 53915-8 Repair Coupling ø63 mm 53915-9 Repair Coupling ø75 mm 53915-10 Repair Coupling ø90 mm 53915-11 Repair Coupling ø110 mm 53920-8-3 Reducing coupling ø63 - 25 53920-8-4 Reducing coupling ø63 - 32 53920-8-6 Reducing coupling ø63 - 40 53920-8-7 Reducing coupling ø63 - 50 53920-9-6 Reducing coupling ø75 - 40 53920-9-7 Reducing coupling ø75 - 50 53920-9-8 Reducing coupling ø75 - 63 53920-10-8 Reducing coupling ø90 - 63 53920-10-9 Reducing coupling ø90 - 75 53920-11-8 Reducing coupling ø110 - 63 53920-11-9 Reducing coupling ø110 - 75 53920-11-10 Reducing coupling ø110 - 90 55910-8-F Male adaptor ø63 x 1”½ 55910-8-G Male adaptor ø63 x 2” 55910-8-H Male adaptor ø63 x 2”½ 55910-9-G Male adaptor ø75 x 2” 55910-9-H Male adaptor ø75 x 2”½ 55910-9-L Male adaptor ø75 x 3” 55910-10-G Male adaptor ø90 x 2” 55910-10-H Male adaptor ø90 x 2”½ 55910-10-L Male adaptor ø90 x 3” 55910-10-M Male adaptor ø90 x 4” 55910-11-L Male adaptor ø110 x 3” 55910-11-M Male adaptor ø110 x 4” 55920-8-F Female adaptor ø63 x 1” ½ 55920-8-G Female adaptor ø63 x 2” 55920-9-G Female adaptor ø75 x 2” 55920-9-H Female adaptor ø75 x 2” ½ 55920-9-L Female adaptor ø75 x 3” 55920-10-L Female adaptor ø90 x 3” 55920-11-L Female adaptor ø110 x 3” 55920-11-M Female adaptor ø110 x 4” 56950-8 90° elbow ø63 mm 56950-9 90° elbow ø75 mm 56950-10 90° elbow ø90 mm 56950-11 90° elbow ø110 mm 56925-8-F 90° male threaded elbow ø63 x 1” ½ 56925-8-G 90° male threaded elbow ø63 x 2” 56925-8-H 90° male threaded elbow ø63 x 2” ½ 56925-9-G 90° male threaded elbow ø75 x 2” 56925-9-H 90° male threaded elbow ø75 x 2” ½ 56925-10-L 0° male threaded elbow ø90 x 3” 56925-10-M 90° male threaded elbow ø90 x 4” 56925-11-M 90° male threaded elbow ø110 x 4” 56935-8-G 90° female threaded elbow ø63 x 2” 56935-9-G 90° female threaded elbow ø75 x 2” 56935-9-H 90° female threaded elbow ø75 x 2” ½ 56935-10-H 90° female threaded elbow ø90 x 2” ½ 56935-10-L 90° female threaded elbow ø90 x 3” 56935-11-L 90° female threaded elbow ø110 x 3” 56935-11-M 90° female threaded elbow ø110 x 4” 54910-8 90° tee ø63 mm 54910-9 90° tee ø75 mm 54910-10 90° tee ø90 mm 54910-11 90° tee ø110 mm 54920-9-8 90° reducing tee ø54920-9-8 54920-10-9 90° reducing tee ø54920-10-9 54920-11-8 90° reducing tee ø54920-11-8 54920-11-9 90° reducing tee ø54920-11-9 54920-11-10 90° reducing tee ø54920-11-10 54930-8-G 90° male threaded tee ø63 x 2” 54930-8-H 90° male threaded tee ø63 x 2”½ 54930-9-G 90° male threaded tee ø75 x 2” 54930-10-L 90° male threaded tee ø90 x 3” 54930-10-M 90° male threaded tee ø90 x 4” 54930-11-L 90° male threaded tee ø110 x 3” 54930-11-M 90° male threaded tee ø110 x 4” 54940-7-G 90° female threaded tee ø63 x 2” 54940-8-G 90° female threaded tee ø63 x 2”½ 54940-9-G 90° female threaded tee ø75 x 2” 54940-10-L 90° female threaded tee ø90 x 3” 54940-10-M 90° female threaded tee ø90 x 4” 54940-11-L 90° female threaded tee ø110 x 3” 54940-11-M 90° female threaded tee ø110 x 4” 56941-8 End cap ø63 mm 56941-9 End cap ø75 mm 56941-10 End cap ø90 mm 56941-11 End cap ø110 mm 55930-8-G Flanged adaptor ø63 x 2” 55930-9-H Flanged adaptor ø75 x 2”½ 55930-9-L Flanged adaptor ø75 x 3” 55930-10-L Flanged adaptor ø90 x 3” 55930-10-M Flanged adaptor ø90 x 4” 55930-11-M Flanged adaptor ø110 x 4” 56980-8-G 90° Flanged Elbow ø63 x 2” 56980-9-H 90° Flanged Elbow ø75 x 2”½ 56980-9-L 90° Flanged Elbow ø75 x 3” 56980-10-L 90° Flanged Elbow ø90 x 3” 56980-10-M 90° Flanged Elbow ø90 x 4” 56980-11-M 90° Flanged Elbow ø110 x 4” 54930-8-G 90° Flanged Tee ø63 x 2” 54930-9-H 90° Flanged Tee ø75 x 2”½ 54930-9-L 90° Flanged Tee ø75 x 3” 54930-10-L 90° Flanged Tee ø90 x 3” 54930-10-M 90° Flanged Tee ø90 x 4” 54930-11-M 90° Flanged Tee ø110 x 4” Models added January 2026: 53910-2 Coupling ø20 mm 53910-3 Coupling ø25 mm 53910-4 Coupling ø32 mm 53910-6 Coupling ø40 mm 53910-7 Coupling ø50 mm 53915-2 Repair Coupling ø20 mm 53915-3 Repair Coupling ø25 mm 53915-4 Repair Coupling ø32 mm 53915-6 Repair Coupling ø40 mm 53915-7 Repair Coupling ø50 mm 53920-3-2 Reducing coupling ø25 - 20 53920-4-2 Reducing coupling ø32 - 20 53920-4-3 Reducing coupling ø32 - 25 53920-6-4 Reducing coupling ø40 - 32 53920-7-4 Reducing coupling ø50 - 32 53920-7-6 Reducing coupling ø50 - 40 55910-2-B Male adaptor ø20 x ½” 55910-2-C Male adaptor ø20 x ¾” 55910-3-B Male adaptor ø25 x ½” 55910-3-C Male adaptor ø25 x ¾” 55910-3-D Male adaptor ø25 x 1” 55910-4-B Male adaptor ø32 x ½” 55910-4-C Male adaptor ø32 x ¾” 55910-4-D Male adaptor ø32 x 1” 55910-4-E Male adaptor ø32 x 1”¼ 55910-6-D Male adaptor ø40 x 1” 55910-6-E Male adaptor ø40 x 1”¼ 55910-6-F Male adaptor ø40 x 1”½ 55910-7-F Male adaptor ø50 x 1”½ 55910-7-G Male adaptor ø50 x 2” 55920-2-B Female adaptor ø20 x ½” 55920-2-C Female adaptor ø20 x ¾” 55920-3-B Female adaptor ø25 x ½” 55920-3-C Female adaptor ø25 x ¾” 55920-3-D Female adaptor ø25 x 1” 55920-4-C Female adaptor ø32 x ¾” 55920-4-D Female adaptor ø32 x 1” 55920-6-D Female adaptor ø40 x 1” 55920-6-E Female adaptor ø40 x 1” ¼ 55920-6-F Female adaptor ø40 x 1” ½ 55920-7-F Female adaptor ø50 x 1” ½ 55920-7-G Female adaptor ø50 x 2” 56950-2 90° elbow ø20 mm 56950-3 90° elbow ø25 mm 56950-4 90° elbow ø32 mm 56950-6 90° elbow ø40 mm 56950-7 90° elbow ø50 mm 56925-2-B 90° male threaded elbow ø20 x ½” 56925-2-C 90° male threaded elbow ø20 x ¾” 56925-3-B 90° male threaded elbow ø25 x ½” 56925-3-C 90° male threaded elbow ø25 x ¾” 56925-3-D 90° male threaded elbow ø25 x 1” 56925-4-C 90° male threaded elbow ø32 x ¾” 56925-4-D 90° male threaded elbow ø32 x 1” 56925-4-E 90° male threaded elbow ø32 x 1” ¼ 56925-6-D 90° male threaded elbow ø40 x 1” 56925-6-E 90° male threaded elbow ø40 x 1” ¼ 56925-6-F 90° male threaded elbow ø40 x 1” ½ 56925-6-G 90° male threaded elbow ø40 x 2” 56925-7-E 90° male threaded elbow ø50 x 1” ¼ 56925-7-F 90° male threaded elbow ø50 x 1” ½ 56925-7-G 90° male threaded elbow ø50 x 2” 56935-2-B 90° female threaded elbow ø20 x ½” 56935-2-C 90° female threaded elbow ø20 x ¾” 56935-3-B 90° female threaded elbow ø25 x ½” 56935-3-C 90° female threaded elbow ø25 x ¾” 56935-3-D 90° female threaded elbow ø25 x 1” 56935-4-C 90° female threaded elbow ø32 x ¾” 56935-4-D 90° female threaded elbow ø32 x 1” 56935-6-D 90° female threaded elbow ø40 x 1” 56935-6-E 90° female threaded elbow ø40 x 1” ¼ 56935-7-F 90° female threaded elbow ø50 x 1” ½ 56935-7-G 90° female threaded elbow ø50 x 2” 56965-2-B 90° wall plate elbow ø20 x ½” 56965-3-B 90° wall plate elbow ø25 x ½” 56965-3-C 90° wall plate elbow ø25 x ¾” 56965-4-D 90° wall plate elbow ø32 x 1” 54910-2 90° tee ø20 mm 54910-3 90° tee ø25 mm 54910-4 90° tee ø32 mm 54910-6 90° tee ø40 mm 54910-7 90° tee ø50 mm 54920-2-3 90° reducing tee ø54920-2-3 54920-3-2 90° reducing tee ø54920-3-2 54920-4-2 90° reducing tee ø54920-4-2 54920-4-3 90° reducing tee ø54920-4-3 54920-6-3 90° reducing tee ø54920-6-3 54920-6-4 90° reducing tee ø54920-6-4 54920-7-3 90° reducing tee ø54920-7-3 54920-7-4 90° reducing tee ø54920-7-4 54920-7-6 90° reducing tee ø54920-7-6 54920-8-3 90° reducing tee ø54920-8-3 54920-8-4 90° reducing tee ø54920-8-4 54920-8-6 90° reducing tee ø54920-8-6 54920-8-7 90° reducing tee ø54920-8-7 54930-1-C 90° male threaded tee ø16 x ¾” 54930-2-B 90° male threaded tee ø20 x ½” 54930-2-C 90° male threaded tee ø20 x ¾” 54930-3-B 90° male threaded tee ø25 x ½” 54930-3-C 90° male threaded tee ø25 x ¾” 54930-3-D 90° male threaded tee ø25 x 1” 54930-4-C 90° male threaded tee ø32 x ¾” 54930-4-D 90° male threaded tee ø32 x 1” 54930-6-D 90° male threaded tee ø40 x 1” 54930-6-E 90° male threaded tee ø40 x 1”¼ 54930-6-F 90° male threaded tee ø40 x 1”½ 54930-7-F 90° male threaded tee ø50 x 1”½ 54930-7-G 90° male threaded tee ø50 x 2” 54940-2-B 90° female threaded tee ø20 x ½” 54940-2-C 90° female threaded tee ø20 x ¾” 54940-3-B 90° female threaded tee ø25 x ½” 54940-3-C 90° female threaded tee ø25 x ¾” 54940-3-D 90° female threaded tee ø25 x 1” 54940-4-C 90° female threaded tee ø32 x ¾” 54940-4-D 90° female threaded tee ø32 x 1” 54940-6-D 90° female threaded tee ø40 x 1” 54940-6-E 90° female threaded tee ø40 x 1”¼ 54940-6-F 90° female threaded tee ø40 x 1”½ 54940-7-E 90° female threaded tee ø50 x 1”½ 54940-7-F 90° female threaded tee ø50 x 2” 56941-2 End cap ø20 mm 56941-3 End cap ø25 mm 56941-4 End cap ø32 mm 56941-6 End cap ø40 mm 56941-7 End cap ø50 mm 55930-7-G Flanged adaptor ø50 x 2” 56980-7-F 90° Flanged Elbow ø50 x1”½ 56980-7-G 90° Flanged Elbow ø50 x 2” 54980-7-F 90° Flanged Tee ø50 x1”½ 54930-7-G 90° Flanged Tee ø50 x 2”

Manufacturer:

Plastica Alfa S.p.a.

Company Name

Plastica Alfa S.p.a.

Address

C.da S.M. Poggiarelli, Z.I., 95041 Caltagirone (CT), Italy

View All Listings by this Company

"PRESSTITE" range of press fittings with nickel plated brass bodies incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved by a TH crimping profile. For above ground use only. Maximum working pressure 10.0 bar. 20 & 26mm pressfit sizes cold water use only. Threaded and pressfit 16mm size maximum operating temperature 95°C. From June 2025: The 20 & 26mm pressfit sizes maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404724

Size:

Pressfit: 16, 20 & 26mm. Threaded: ½”, ¾” & 1” BSP (M)/(F) or captive nut.

Marking:

IDC logo: E mark (~E~ within circle), profile type (TH), size and PN on fitting body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Straight PEX x PEX (press x press): 900310002 - 16mm x 16mm 900310003 - 20mm x 20mm 900310004 - 26mm x 26mm Reduce Straight PEX x PEX (press x press): 900310032 - 20mm x 16mm 900310042 - 26mm x 16mm 900310043 - 26mm x 20mm Straight PEX x Female (press x female): 900312003 - 20mm x 1/2"F 900312004 - 26mm x 3/4"F 900312023 - 16mm x 1/2"F 900312034 - 20mm x 3/4"F 900312045 - 26mm x 1"F Stop end (press): 900372002 - 16mm 900372003 - 20mm 900372004 - 26mm Elbow (press): 900315002 - 16mm 900315003 - 20mm 900315004 - 26mm Elbow PEX x Male (press x male): 900316023 - 16mm x 1/2"M 900316003 - 20mm x 1/2"M 900316034 - 20mm x 3/4"M 900316004 - 26mm x 3/4"M Elbow PEX x Female (press x female): 900317023 - 16mm x 1/2"F 900317003 - 20mm x 1/2"F 900317034 - 20mm x 3/4"F 900317004 - 26mm x 3/4"F Wall Plate PEX x Female (press x female): 900307023 - 16 x 1/2"F 900307003 - 20 x 1/2"F 900307034 - 20 x 3/4"F 900307004 - 26 x 3/4"F Equal Tee (press): 900318002 - 16mm 900318003 - 20mm 900318004 - 26mm Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): 900318232 - 16 x 20 x 16 900318322 - 20 x 16 x 16 900318323 - 20 x 16 x 20 900318332 - 20 x 20 x 16 900318343 - 20 x 26 x 20 900318422 - 26 x 16 x 16 900318423 - 26 x 16 x 20 900318424 - 26 x 16 x 26 900318432 - 26 x 20 x 16 900318433 - 26 x 20 x 20 900318434 - 26 x 20 x 26 900318442 - 26 x 26 x 16 900318443 - 26 x 26 x 20 900318454 - 26 x 32 x 26 Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): 900330004 - 26 x 3/4"F x 20 900330023 - 16 x 1/2"F x 16 900330033 - 20 x 1/2"F x 20 900330034 - 20 x 3/4"F x 20 900330043 - 26 x 1/2"F x 26

Approval Holder:

Hevac Ltd

Company Name

Hevac Ltd

Address

Muirfield Drive Naas Road Dublin 12

Postcode

D12 X0A3

Country

Ireland

Phone

0035 314 191924

General Email

dave.grenville@hevac.ie

View All Listings by this Company

Manufacturer:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Range of stainless-steel press fittings (SUS304 or 316L) with EPDM ‘O’-rings for use with stainless-steel pipe (SUS304 or 316L EN 10312), using an ‘M’ press profile. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241004054

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SEE MODEL

Marking:

KPress logo, material and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

HB-H15XXX - 45 Degree Equal Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I15XXX - 45 Degree Equal Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H16XXX - 45 Degree Plain End Elbow - SUS304 - 28, 35, 42, 54. HB-I16XXX - 45 Degree Plain End Elbow - SUS316L - 28, 35, 42, 54. HB-H07XXX - 90 Degree Equal Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I07XXX - 90 Degree Equal Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H08XXX - 90 Degree Female Thread Elbow - SUS304 - 18xRp1/2", 22xRp1/2", 28xRp1", 35xRp1", 35x Rp1 1/4", 42xRp1 1/2", 42xRp1 1/4", 54xRp2", 76.1xRp2 1/2". HB-I08XXX - 90 Degree Female Thread Elbow - SUS316L - 18xRp1/2", 22xRp1/2", 28xRp1", 35xRp1", 35x Rp1 1/4", 42xRp1 1/2", 42xRp1 1/4", 54xRp2", 76.1xRp2 1/2". HB-H09XXX - 90 Degree Male Thread Elbow - SUS304 - 18xR1/2", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2", 88.9xR3", 108xR4". HB-I09XXX - 90 Degree Male Thread Elbow - SUS316L - 18xR1/2", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2", 88.9xR3", 108xR4". HB-H14XXX - 90 Degree Plain End Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I14XXX - 90 Degree Plain End Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H18XXX - Cap - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I18XXX - Cap - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H01XXX - Coupling - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I01XXX - Coupling - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H03XXX - Male Thread Adapter - SUS304 - 18xR1/2", 22xR1/2", 28xR1", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2". HB-I03XXX - Male Thread Adapter - SUS316L - 18xR1/2", 22xR1/2", 28xR1", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2". HB-H24XXX - Plain End Coupling - SUS304 - 28x35, 28x42, 35x42, 42x54, 54x76.1, 35x28, DN40x25, DN40x32, DN65x40, DN65x32. HB-I24XXX - Plain end Coupling - SUS316L - 28x35, 28x42, 35x42, 42x54, 54x76.1, 35x28, DN40x25, DN40x32, DN65x40, DN65x32. HB-H02XXX - Reducing Coupling - SUS304 - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-I02XXX - Reducing Coupling - SUS316L - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-H13XXX - Reducing Cross - SUS304 - 35x28, 42x28, 54x28, 76.1x28, 88.9x28, 54x35, 76.1x35, 88.9x35, 108x35, DN80x40, DN80x50, DN100x40. HB-I13XXX - Reducing Cross - SUS316L - 35x28, 42x28, 54x28, 76.1x28, 88.9x28, 54x35, 76.1x35, 88.9x35, 108x35, DN80x40, DN80x50, DN100x40. HB-H06XXX - Reducing Tee - SUS304 - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-I06XXX - Reducing Tee - SUS316L - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-H19XXX - Slip Coupling - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I19XXX - Slip Coupling - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H11XXX - Tee with male Thread - SUS304 - 18xR1/2", 22xR1/2", 22xR3/4", 28xR1/2", 28xR3/4", 28xR1", 35xR1/2", 35xR3/4", 35xR1". HB-I11XXX - Tee with male Thread - SUS316L - 18xR1/2", 22xR1/2", 22xR3/4", 28xR1/2", 28xR3/4", 28xR1", 35xR1/2", 35xR3/4", 35xR1". HB-H20XXX - Union Adapter - SUS304 - 18xG1/2", 18xG3/4", 22xG1/2", 22xG3/4", 22xG1", 28xG1", 35xG1 1/4", 42xG 1 1/2". HB-I20XXX - Union Adapter - SUS316L - 18xG1/2", 18xG3/4", 22xG1/2", 22xG3/4", 22xG1", 28xG1", 35xG1 1/4", 42xG 1 1/2". HB-H05XXX - Equal Tee - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I05XXX - Equal Tee - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H12XXX - Equal Cross - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I12XXX - Equal Cross - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H10XXX - Tee with Female Thread - SUS304 - 18xRp1/2", 22xRp1/2", 22xRp3/4", 28xRp1/2", 28x Rp3/4", 28xRp1", 35xRp1/2", 35xRp3/4", 35xRp1". HB-I10XXX - Tee with Female Thread - SUS316L - 18xRp1/2", 22xRp1/2", 22xRp3/4", 28xRp1/2", 28x Rp3/4", 28xRp1", 35xRp1/2", 35xRp3/4", 35xRp1". HB-H00XXX - Stainless Steel Pipe - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I00XXX - Stainless Steel Pipe - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108.

Approval Holder:

Kesanitar GmbH

Company Name

Kesanitar GmbH

Address

Märkische Straße 12, 47809 Krefeld, NRW

Country

Germany

Phone

+49 2151 3624071

General Email

info@kesanitar.com

View All Listings by this Company

5000 series of copper end feed fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250708026

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Eagle brand logo on fitting.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

5001A 90° Street bend 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5002G 90° Bent tap Connector 15mm x ½”, 15mm x ¾”, 22mm x ¾” 5002A 90° Bend 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5040 45° Street Elbow 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5041 45° Elbow 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5085 Full Crossover 15mm, 22mm 5086 Partial Crossover 15mm, 22mm 5090 90° Elbow 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5090R 90° Elbow 22mm x 15mm 5092 90° Street Elbow 10mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm 5130 Equal Tee 8mm, 10mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm 5301 End Cap 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5130R Reducing Tee 15mmx22mmx15mm，22mmx15mmx15mm， 22mmx15mmx22mm，22mmx22mmx15mm， 22mmx28mmx22mm，28mmx15mmx15mm， 28mmx15mmx28mm，28mmx22mmx22mm， 28mmx22mmx28mm，28mmx28mmx15mm， 28mmx28mmx22mm，35mmx15mmx35mm， 35mmx22mmx35mm，35mmx28mmx28mm， 35mmx28mmx35mm，42mmx15mmx42mm， 42mmx22mmx42mm，42mmx28mmx42mm， 42mmx35mmx42mm，54mmx15mmx54mm， 54mmx22mmx54mm，54mmx28mmx54mm， 54mmx35mmx54mm，54mmx42mmx54mm 5240 Reducing Coupling 22mm x 15mm，28mm x 15mm，28mm x 22mm， 35mm x 15mm，35mm x 22mm，35mm x 28mm， 42mm x 15mm，42mm x 22mm，42mm x 28mm， 42mm x 35mm，54mm x 22mm，54mm x 28mm 54mm x 35mm, 54mm x 42mm 5421 Metric imperial Coupling 15mm x ½”, 22mm x ¾” 5270 Straight Coupling 15mm， 22mm， 28mm, 35mm, 42mm, 54mm 5243 Fitting reducer 22mm x 15mm，28mm x 15mm，28mm x 22mm， 35mm x 15mm，35mm x 22mm，35mm x 28mm， 42mm x 15mm，42mm x 22mm，42mm x 28mm， 42mm x 35mm，54mm x 22mm，54mm x 28mm 54mm x 35mm, 54mm x 42mm 5359G Straight Tap Connector 15mm x 1/2"，15mm x 3/4"，22mm x 3/4"

Approval Holder:

SCE Technology (Ningbo) Co., Ltd

Company Name

SCE Technology (Ningbo) Co., Ltd

Address

No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Ningbo Zhejiang

Country

China

View All Listings by this Company

Dual flush, WC outlet valves for either full or reduced flush. Incorporates an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

250902702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2” BSP (M)

Marking:

R&T logo & model body.

Installation Requirements:

R001 R556 R571

Expiry date:

30/09/2030

Model:

A2415L, A2415M & A2706

Manufacturer:

Xiamen R&T Plumbing Technology Co.,Ltd

Company Name

Xiamen R&T Plumbing Technology Co.,Ltd

Address

No.18, Houxiang Road Haicang District Xiamen

Postcode

361022

Country

China

Phone

86-0592-3959422

View All Listings by this Company

Dual flush, WC outlet valve operated via a lever operated assembly for either full or reduced flush. Incorporates an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

250902701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2” BSP (M)

Marking:

R&T logo & model on body.

Installation Requirements:

R001 R556 R571

Expiry date:

30/09/2030

Model:

A24233

Manufacturer:

Xiamen R&T Plumbing Technology Co.,Ltd

Company Name

Xiamen R&T Plumbing Technology Co.,Ltd

Address

No.18, Houxiang Road Haicang District Xiamen

Postcode

361022

Country

China

Phone

86-0592-3959422

View All Listings by this Company

Range of dual flush WC outlet valves operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

250902710

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2” BSP (M)

Marking:

WDI, model & WRAS on body.

Installation Requirements:

R001 R556 R571

Expiry date:

30/09/2030

Model:

B4900-U B4900-G B4900H-U B4900H-G

Stainless steel plate heat exchangers with copper brazing.

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

0.75 to 2”.

Marking:

UK Exchangers and product info on label.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

UKE-BR030 UKE-BR040 UKE-BR060H UKE-BR050 UKE-BR050R UKE-BR095H BR200L UKE-BR200M UKE-BR205 UKE-BRX12B

Approval Holder:

UK Exchangers Ltd

Company Name

UK Exchangers Ltd

Address

Unit 55 Stilebrook Road Olney

Postcode

MK46 5EA

Country

United Kingdom

General Email

alex@ukeltd.com

View All Listings by this Company

Near boiling hot water dispensers with stainless steel tanks and flow is controlled via float switch. Maximum working pressure 3 Bar. Maximum operating temperature 98°C.

Section:

1380 Heaters

Section Subtitle:

Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

241202719

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/8” BSP M inlet/outlet

Marking:

Alfred Victoria "crown" logo on front of body. Model and product info on label on rear of body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

F104M

Approval Holder:

ALFRED VICTORIA LIMITED

Company Name

ALFRED VICTORIA LIMITED

Postcode

B45 9AL

View All Listings by this Company

Range of water meters with brass bodies. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature is 50°C or 85°C, please refer to model.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) or 1” BSP (M)

Marking:

APATOR, date of manufacture (YYYY) and product information on face of water meter. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Maximum operating temperature 50°C: JS 1,6-02 JS 1,6-04 JS 1,6-NK JS 1,6-NKP JS 4-02 JS 4-04 JS 4-NK JS 4-NKP JS 2,5-02 JS 2,5-04 JS 2,5-NK JS 2,5-NKP JS 2,5-G1-02 JS 2,5-G1-04 JS 2,5-G1-NK JS 2,5-G1-NKP Maximum operating temperature 85°C: JS90 1,6-02 JS90 1,6-04 JS90 1,6-NK JS901,6-NKP JS90 2,5-02 JS90 2,5-04 JS90 2,5-NK JS90 2,5-NKP JS90 2,5-G1-02 JS90 2,5-G1-04 JS90 2,5-G1-NK JS90 2,5-G1-NKP JS90 4-02 JS90 4-04 JS90 4-NK JS90 4-NKP

Approval Holder:

Pittway Sarl

Company Name

Pittway Sarl

Address

A3 - ZA La Pièce 6 1180 Rolle

Country

Switzerland

View All Listings by this Company

Manufacturer:

Apator Powogaz S.A.

Company Name

Apator Powogaz S.A.

Address

Jaryszki 1C, 62-023 Żerniki

Country

Poland

Phone

+48 789 454 593

View All Listings by this Company

Compact wall outlet elbow with brass body (various finishes). Maximum operating temperature 85.0°C Open outlet use only

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Aqualisa on body

Installation Requirements:

R001 R040

Expiry date:

30/09/2030

Model:

1001359 ** ** Where ** ** denotes the finish and can be replaced with the following: AA = Chrome AD = Matt Black AH = Core Brushed Brass Post 24 (Xenia) AJ = Core Brushed Gunmetal Grey AQ = Aqualisa (Brand)

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of flow sensors incorporating either brass, plastic or stainless steel bodies & EPDM ‘O’-rings. Maximum working pressure 10.0 bar for models VVXA, VVXC, VVXB. Maximum working pressure 16.0 bar for models VVXD & VVXE. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Sika logo, pressure, temperature, other tech info on body; flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

VVXA Vortex Flow Sensor Type VVX15 Vortex Flow Sensor nominal size 15. Body material PPS, G ¾ male or ½” NPT male VVXC Vortex Flow Sensor Type VVX20 Vortex Flow Sensor nominal size 20. Body material PPS G 1 male or ¾” NPT male or Quick-Fasten male/female VVXB Vortex Flow Sensor Type VVX25 Vortex Flow Sensor nominal size 25. Body material PPS G 1¼ male or 1” NPT male VVXD Vortex Flow Sensor Type VVX32 Vortex Flow Sensor nominal size 32. Body material brass or stainless steel G 1½ male or 1½” NPT male VVXE Vortex Flow Sensor Type VVX40 Vortex Flow Sensor nominal size 40. Body material brass or stainless steel G 2 male or 2” NPT male • digit 1,2,3: Designation of the series o VVX >>> VVX series • digit 4: nominal diameter o A >>> DN 15 for type VVX15 o C >>> DN 20 for type VVX20 o B >>> DN 25 for type VVX25 o D >>> DN 32 for type VVX32 o E >>> DN 40 for type VVX40 • digit 5,7,8,9,10,11,12,13,14,15: Device configuration • digit 6: Private label o S >>> SIKA (standard) o E >>> SIKA (standard) with ETL marking • digit 4 and 16: tube material / process connection o A and 4 >>> PPS – G 3/4 male thread o A and C >>> PPS – ½”NPT male thread o C and P >>> PPS – Quick-Fasten connection o C and 7 >>> PPS – G 1 male thread o C and 8 >>> PPS – 3/4" NPT male thread o B and 6 >>> PPS – G 1 1/4 male thread o B and E >>> PPS – 1” NPT male thread o D and U >>> Brass – G 1 1/2 male thread o D and 0 >>> Brass – 1½" NPT male thread o D and M >>> Stainless steel – G 1 1/2 male thread o D and Y >>> Stainless steel – 1½" NPT male thread o E and X >>> Brass – G 2 male thread o E and 9 >>> Brass – 2" NPT male thread o E and O >>> Stainless steel – G 2 male thread o E and Z >>> Stainless steel – 2" NPT male thread

Approval Holder:

SIKA Systemtechnik GmbH

Company Name

SIKA Systemtechnik GmbH

Address

Struthweg 7-9 Kaufungen

Postcode

34260

Country

Germany

Phone

+49 5605 803 652

General Email

grass@sika.net

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 2.0 bar (MS(s) models), 4.0 bar (AM(E) models) Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102725

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

TERAL, model, size & technical information on date label on body. Flow arrow on cover.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

MS(m)XXX-XX-E 1.m: different phase. --m: single phase, none: three phases 2.XXX: Rated flow (L/min) 3.XX: Rated power(kW). 4.E: E type end connection mode and size -- Rated flow(70-120m3/h): G1¼"XG1" -- Rated flow(210m3/h): G1½"XG1¼" -- Rated flow (370 m3/h): G2"XG1¼ AM(E) XXxXX (B) X/X-X XX(S) 1. E: Intelligent Type 2. XX: Inlet diameter (mm), range: 25,32,40,50 mm. 3. XX: Outlet diameter (mm), range: 25,32,40,50 mm. 4. B: alternative pump group 4. X/X: number of impeller /number of smaller impeller (if any) 5. X: motor frequency 6. XX: Rated power(kW) 7. S: different phase (S: single phase, none: three phases.)

Range of multistage centrifugal pumps with stainless-steel housings, stainless-steel impellers and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250902720

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN25 - DN200 flanged.

Marking:

Dooch, model, serial number and technical info on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

30/09/2030

Proviso:

The discharge from the drain core must be made via a type AA, AB or AD air gap, or in accordance with EN 1717.

Model:

XRLNa-b-c-d Where: XRL = model. With N = Wetted metallic material in SUS316L, Without N = Wetted metallic material in SUS304. a = Rated flow in m³/h (1 – 255). DN25 = 1-3. DN32 = 4-5. DN40 = 10. DN50 = 15-20. DN65 = 32. DN80 = 45. DN100 = 64 or 95. DN150 = 125-155. DN200 = 185-255. b = Number of impellers (stages 1 – 36). DN25 & DN32 models with 1 – 36 stages. DN40 models with 1 – 22 stages. DN50 models with 1 – 17 stages. DN65 models with 1 – 14 stages. DN80 models with 1 – 13 stages. DN100 models with 1 – 8 stages. DN150 models with 1 – 10 stages. DN200 models with 1 – 8 stages. c = Number of cutting impellers (0 – 3). (Note: c can be omitted when c = 0.) d = DN size (DN25 – DN200). (Note: d can be omitted.) E.g., XRL32-7-2-DN65 denotes: Pump is made of SUS304, rated flow 32 m³/h, 7 impellers, 2 cutting impellers and size DN65.

Approval Holder:

SHANGHAI SINO-KOREA DOOCH PUMP MFG. CO., LTD

Company Name

SHANGHAI SINO-KOREA DOOCH PUMP MFG. CO., LTD

Address

No 239 Zhangliantang Rd Liantang Ind Park Qingpu District Shanghai City China

View All Listings by this Company

Manufacturer:

ZHONGHAN DOOCH PUMP(HUZHOU)CO., LTD.

Company Name

ZHONGHAN DOOCH PUMP(HUZHOU)CO., LTD.

Address

NO 669 DAYANG ROAD KANGSHAN STREET HUZHOU ZHEJAING CHINA

View All Listings by this Company

Range of pumps, with stainless steel bodies, impellers and shaft. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250904702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Wilo, made in Korea, Model No., Serial No., website address, & other tech info on data label. Wilo printed on control panel.

Installation Requirements:

R001 R415

Expiry date:

30/09/2030

Model:

PBI-L203EA - Suction 25A(1”) Discharge 25A(1”) PBI-L204EA - Suction 25A(1”) Discharge 25A(1”) PBI-L205EA - Suction 25A(1”) Discharge 25A(1”) PBI-L402EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-L403EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-L404EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-L405EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-L802EA - Suction 40A(1 1/2”) Discharge 32A(1 1/4”) PBI-L803EA - Suction 40A(1 1/2”) Discharge 32A(1 1/4”) PBI-LD203EA - Suction 25A(1”) Discharge 25A(1”) PBI-LD402EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-LD403EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-LD404EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-LD405EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-LD802EA - Suction 40A(1 1/2”) Discharge 32A(1 1/4”) PBI-LD803EA - Suction 40A(1 1/2”) Discharge 32A(1 1/4”) 1 - Series PBI-L: Electronic Boosting Pump Variable Speed Pump(Inverter Pump). 2 - Number of Pumps None/blank : Single Type (One Pump), D: Duplex Type (Two Pumps). 3 - Rated Flow capacity 2 : 2㎥/hr, 4 : 4㎥/hr, 8 : 8㎥/hr. 4 - Number of Impellers 02 : 2 Impellers, 03 : 3 Impellers, 04 : 4 Impellers, 05 : 5 Impellers. 5 - Power 60Hz L: 110V ~, J: 120V ~ , 127V~, M: 220V~ D: 110V/220V~, I: 220/380V 3~, T: 220V 3~, U: 380V 3~, N: 440V 3~, R: 480V 3~. 50Hz Z: 110V ~, C: 120V ~, 127V~, E: 220V ~, F: 110V/220V ~, G: 220/380V 3~, H: 220V 3~, Q: 380V 3~, Y: 440V 3~. 6 - Automatic mode. None/blank : non automatic models A: models which equips themselves with components that are responsible for automatic mode.

Approval Holder:

WILO Pumps Ltd.

Company Name

WILO Pumps Ltd.

Address

46, Mieumsandan 1-ro, Gangseo-gu, Busan, Republic of Korea, 46730

View All Listings by this Company

Range of overhead shower heads and arms incorporating a brass or ABS plastic body. The inlet of models KSAB4K and HEAH06BK incorporates a stainless-steel strainer and plastic flow regulator. Model EKIT01/A is a shower kit consisting of a shower hose, handset and riser rail and model AIR1HSCPWHUK shower handset only. Open outlet use only. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

251204004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SEE MODELS.

Marking:

KSABK : Methven, DTC 15,DEVA etched on shower face, joint. HEAH06: DTC 15, DEVA etched on joint EKIT01/A : Methven etched on hand shower.

Installation Requirements:

R001 R040

Expiry date:

31/12/2030

Model:

KSABK ½” BSP (M), HEAH06 ½” BSP (F), AIR1HSCPWHUK ½” BSP (M), EKIT01/A ½” BSP (F).

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Range of Y-patterned strainers with brass bodies and a stainless-steel mesh strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” - 4” BSP (F)x(F).

Marking:

Herz "heart" logo on plug. PN, DN &flow arrow on body.

Installation Requirements:

R001 R120

Expiry date:

30/06/2030

Model:

2 2662 01 - DN15 2 2662 02 - DN20 2 2662 03 - DN25 2 2662 04 - DN32 2 2662 05 - DN40 2 2662 06 - DN50

Approval Holder:

Herz Armaturen GmbH

Company Name

Herz Armaturen GmbH

Address

Richard - Strauss Strasse 22, A-1230, Vienna

Country

Austria

View All Listings by this Company

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)

Marking:

Manufacturers logo (H), size, pressure rating and flow arrow on body. Product info on data plate.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

F2143W

Approval Holder:

TECOFI

Company Name

TECOFI

Address

2 Rue Barthélemy Thimonier ZAC Everest Lyon

Postcode

69740

Country

France

General Email

j.ortega@tecofi.fr

View All Listings by this Company

Manufacturer:

Ningbo Yongxiang Copper Pipeline Co. Ltd

Company Name

Ningbo Yongxiang Copper Pipeline Co. Ltd

Address

Hehua Bridge, Yunlong Town, Yinzhou District, Ningbo, China

General Email

View All Listings by this Company

Manufacturer:

Ningbo Yongxiang Copper Pipeline Co. Ltd

Company Name

Ningbo Yongxiang Copper Pipeline Co. Ltd

Address

Hehua Bridge, Yunlong Town, Yinzhou District, Ningbo, China

General Email

View All Listings by this Company

Range of in-line Y patterned strainers with bronze bodies and a stainless-steel mesh strainer. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Honeywell logo, PN & Size on bonnet. Size, DN & flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

V3-YST-A150-B015N. :1/2” V3-YST-A150-B020N. :3/4” V3-YST-A150-B025N. :1” V3-YST-A150-B032N. :1-1/4” V3-YST-A150-B040N. :1-1/2” V3-YST-A150-B050N. ：2”

Approval Holder:

Honeywell International Middle East

Company Name

Honeywell International Middle East

Address

EMAAR BUSINESS PARK 1st St Dubai

Country

United Arab Emirates

General Email

Mona.Ali@Honeywell.com

View All Listings by this Company

GYS20/W Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)

Marking:

Company logo SHIELD, size, pressure rating and BS5154 on body. Product info on data plate.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

GYS20/W

Approval Holder:

SHIELD FIRE SAFETY & SECURITY LTD

Company Name

SHIELD FIRE SAFETY & SECURITY LTD

Address

Unit 3, Endeavour Drive Basildon- Essex

Postcode

SS14 3WF

Country

United Kingdom

Phone

+44 (0) 1708 377731

General Email

info@shieldglobal.com

View All Listings by this Company