Range of wall mounted, thermostatic, shower valves, (brass bodies - various finishes) incorporating a two-way ceramic disc diverter headwork to control the flow between two shower outlets with dome type operating members. The temperature and flow is controlled by a ceramic cartridge headwork with a single lever. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a hose, handset and overhead shower. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of butterfly valves with blue epoxy coated ductile iron bodies, stainless steel discs and EPDM seats. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of wafer and fully lugged (see models) butterfly valves incorporating plastic bodies & discs and an EPDM seat. Maximum working pressure 16.0 bar Maximum operating temperature 100°C.
Range of flow control valves with (chromium plated brass bodies) incorporating a ceramic cartridge headwork with single lever operating members and stainless-steel braided supply hoses. Maximum working pressure 10.0 Bar. Maximum operating temperature 70.0°C.
Range of manually operated flow control valves with brass bodies and either ¼ turn or ½ turn ceramic disc headworks (refer to model). The products are available with trim sets and operating members in various finishes (refer to models). Maximum working pressure 5.0 bar. Maximum operating temperature 85⁰C.
Range of non-return, swing gate valves with bronze, DZR brass or brass bodies and DZR brass, bronze or brass discs. Maximum working pressure 20.0 bar or 16.0 bar (please refer to model) Maximum operating temperature 85°C.
Range of in-line, manually adjustable pressure reducing valves with DZR brass bodies. The RP1XX and RP2xx models can be supplied with a low- or high-pressure spring. The RP800 model is only available with a high-pressure spring. The RP1XX and RP2xx models can be pre-set from the factory at any value between the spring adjustment range (see below), e.g., the RP135 model will have a high-pressure spring and is pre-set at 3.5 bar. The RP800 is provided pre-set from the factory at 2.8 bar. Maximum inlet supply pressure 5.0 bar. Low-pressure spring adjustment range between 1.0 bar - 2.0 bar. High-pressure spring adjustment range between 2.1 - 5.0 bar. Cold water use only.
Range of angled pressure relief valves (3.5 & 6.0 Bar) with DZR brass bodies. PREL107020 is for use with copper pipe manufactured to BS EN 1057. Maximum working pressure 10.0 Bar. Maximum operating temperature 90°C.
Pressure relief valve (pre-set to 6 bar outlet pressure) with a DZR brass body. Maximum working pressure 6.0 bar. Maximum operating temperature 75°C.
Range of pressure relief valves with gunmetal bodies and a lever operated easing gear. All have a pre-set pressure, ranging from 1.0 - 12.5 bar. Maximum operating temperature 95°C.
Range of pre-set pressure relief valves with gunmetal bodies and a lever operated easing gear. Pre-set relief pressures: 1.0 bar to 10.5 bar. Maximum operating temperature 95°C.
Range of spherical valves with stainless steel bodies, stainless steel ball and lever operating members. The press-fit connection is for use with stainless steel pipe (manufactured to EN10312). Jointing is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of spherical valves, with DZR brass bodies and chromium plated brass balls. The products can be supplied with various operating members (see model). Maximum working pressure 40.0 bar. Maximum operating temperature 85°C.
Range of in-line hex key operated spherical valves incorporating nickel plated or chromium plated brass bodies and chromium plated brass balls. The compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Quarter turn, butterfly operated spherical valves with nickel plated brass bodies, chrome plated brass balls and PTFE seals. For use with copper pipe BS EN 1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of press fit spherical valves with brass and chrome plated brass bodies. For use with copper pipe to BS EN 1057. Maximum working pressure 16.0 Bar Maximum operating temperature 85 °C.
Range of screwdriver operated spherical valves with brass or chrome plated brass bodies Compression fittings for use with copper pipe to BS EN 1057. Maximum working pressure 8.0 Bar Maximum operating temperature 80 °C.
Range of straight isolation spherical valves in Brass or Nickle-Plated Brass. Models have screwdriver or butterfly operating members. Maximum working pressure 10.0 or 16.0 bar. Maximum operating temperature 85°.
Range of spherical valves with (bronze or brass bodies) incorporating a brass or stainless-steel ball with PTFE seat. B40 Bronze range - Maximum operating pressure - 40 bar. Maximum operating temperature 85°C. B10 Brass range - Maximum operating pressure - 25 bar. Maximum operating temperature - 85°C.
Range of spherical valves with bronze bodies incorporating a brass or stainless-steel ball with PTFE seat. Maximum operating pressure - 40 bar. Maximum operating temperature 85°C.
Range of lever operated spherical valves with nickel plated brass bodies Max working pressure: 20 bar. Max operating temperature: 85°C.
Range of spherical valves with nickel plated brass bodies, nickel plated brass ball and PTFE seats. The LD 47.300.XX and LD 47.302.XX models have a butterfly handle. The LD 47.301.XX and LD 47.303.XX models have a lever operating member (normal and special type). The LD 47.340.XX and LD 47.342.XX models have a T-handle. Maximum working pressures: ½” - 1” sizes: 40.0 bar, 1¼” - 2” sizes: 25.0 bar. Maximum operating temperature 100°C.
Range of plastic bodies spherical valves (black, white and grey) incorporating either a screwdriver slot, lever or handwheel operating member (model specific). The pushfit connections are for use with DM LLDPE tubing (not supplied) and PEX barrier pipe (manufactured to BS7291-3). When used with DM LLDPE tubing (not supplied) the supplied black or grey pipe inserts must be installed. When used with PEX barrier pipe the supplied beige pipe inserts must be installed. Maximum working pressures and temperatures: When used with DM LLDPE tubing: Grey body valves, for sizes 6-15mm and ¼”-½” pushfit: 12.0 bar, cold water use only. Grey body valves, for sizes 6-12mm and ¼”-½” pushfit: 7.0 bar @ 65°C. Black and white body valves, for sizes 6-15mm and ¼”-½” pushfit: 12.0 bar, cold water use only and 7.0 bar @ 65°C. When used with PEX Barrier pipe (manufactured to BS7291-3): Grey body valves, for sizes 15-22mm, 5/8” and 7/8” pushfit: 12.0 bar, cold water use only. Black and white body valves, for sizes 15-22mm, 5/8” and 7/8” pushfit: 12.0 bar, cold water use only and 7.0 bar @ 65°C. All fittings which incorporate a barbed end connection are open outlet use only.
Range of press fit gate valves with brass bodies. For use with copper pipe to EN1057. Maximum working pressure 16.0 Bar Maximum operating temperature 85 °C.
Range of non-rising spindle gate valves with DZR brass or brass bodies, incorporating PTFE stem packing and gaskets and handwheel operating members. Maximum working pressure 16.0 Bar Maximum operating temperature 85°C
Range of gate valve with ductile iron bodies, wedge and bonnet (blue epoxy powder coated). Valves are operated via a non-rising spindle headwork. Maximum working pressure 16.0 Bar Maximum operating temperature 99.0°C
‘Z123’ range of gate valves with either brass or DZR brass bodies and PTFE washers. Valves are operated via a non-rising spindle headwork with a wheel type operating member. Maximum working pressure 16.0 or 20.0 Bar Maximum operating temperature 85.0°C
Range of bronze gate valves incorporating bronze wedges and non-rising stems. Maximum working pressure 20.0 Bar Maximum operating temperature 85.0°C
Range of gate valves with ductile iron bodies (blue epoxy coated), EPDM discs and non-rising spindles with hand wheel operating members. Maximum working pressure 10.0 Bar Maximum operating temperature 80.0°C
Range of non-rising spindle gate valves with DZR brass bodies. Operating members are either handwheel operated or lockshield. Maximum working pressure: 20.0 bar. Maximum operating temperature: 100°C.
Range of gate valves with brass bodies and wedges. The valves are operated via a non-rising spindle with a hand wheel operating member. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.
Range of screw down valves with brass or DZR brass bodies, brass or DZR brass bonnets, EPDM washers and PTFE seats. Compression connection to be used with copper pipe manufactured to EN1057. Maximum working pressure 16 bar. Maximum operating temperature 85°C.
Range of screw down stop valves with brass or chrome plated brass bodies and EPDM seals. For use with copper pipe to EN1057. Maximum working pressure 16.0 Bar Maximum operating temperature 85 °C.
Range of press fit screw down stop valves with brass bodies and EPDM seals. For use with copper pipe to EN1057. Maximum working pressure 16.0 Bar Maximum operating temperature 85 °C.
Range of handwheel operated bronze bodied stop valves. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.
Range of bronze double regulating valves. Products incorporate a non-rising spindle headwork. Products also include two test ports. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of balancing valves with bronze bodies and DZR brass bonnets. Maximum working pressure 20.0 bar. Maximum operating temperature 85⁰C.
Range of double regulating valves with DZR brass, products incorporate a non-rising spindle headwork. Products also include two test ports. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
'EB-1003'. Factory applied, blue coloured epoxy powder coating. Apply and cure as per manufacturer's instructions 'Fowry Powder-001' dated '2020.3.20'. For use with water up to 85°C.
'Radilon A RCM4010RKC 306 BK'. Black coloured, injection moulded, glass filled PA66 material. For use with water up to 85°C.
'TYPLEX-1050'. Grey coloured, extruded polybutene-1 material. For use with water up to 85°C.
'TYPLEX 4055'. White coloured (opaque), extruded Polybutene-1 material. For use with water up to 85°C.
'UP 5604 TP' (amber coloured) & 'UP- 4601 TPI' (pink coloured). Unsaturated polyester resin materials manufactured by hand lay-up. For use with water up to 50°C.
'Bingo HDPE Fittings 02'. Black coloured, injection moulded HDPE fittings. For use with water up to 85°C.
'Hotace HDPE Black Pipe'. Black coloured (with blue stripes), extruded HDPE pipe. For use with water up to 80°C.
'Hengyuan PE100 Fittings'. Black coloured, injection moulded PE100 fittings. For use with water up to 60°C.
'SABIC® Vestolen A RELY 5924 R 10000 (Black)'. Black coloured, compression moulded HDPE material. For use with water up to 23°C.
'Fortron ICE 504L SD 3039 black (DW)'. Black coloured, injection moulded PPS material. For use with water up to 85°C.
'PRO V200'. Site applied, two-part (supplied with internal mixing nozzle so no manual mixing required), brown coloured chemical anchor resin. Apply as per manufacturer's instructions 'Version 7', dated '18/05/2022'. Cure for 4 days@5°C. For use with water up to 23°C. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'70EP505p'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.
Page 210 of 233
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
