Range of wall mounted thermostatic shower valves (chromium plated brass bodies), incorporating ceramic disc headworks controlling the flow and thermostatic cartridges independently controlling the temperature, with a single lever or cross top operating members. The inlets incorporate flow regulators, plastic strainers and approved single check valve cartridges (however, the complete products have not been fully tested to demonstrate that they provide adequate backflow protection). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic shower valves (chromium plated brass bodies), incorporating ceramic disc headwork controlling the flow and a thermostatic cartridge independently controlling the temperature, both using single lever operating members. Both inlets incorporate flow regulators, plastic strainers and approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection). Products are supplied with a chromium plated shower handset, shower hose and riser rail assembly. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of T type thermostatic blending valves with (brass bodies - chrome plated finishes). The inlets incorporate a stainless-steel strainer. ISO models incorporate a servicing valve on each inlet. For use with copper pipe (BS EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of concealed thermostatic blending valves (brass bodies – various finishes) with ceramic diverter controlling the flow which also diverts to 2 outlets and a thermostatic cartridge controlling the temperature independently. The inlets incorporate an approved check valve cartridge which has not been fully tested to demonstrate it provides backflow protection. Shower hose and handset not supplied. Maximum working pressure 10.0 Bar Maximum operating temperature 70 °C.
Range of butterfly valves with blue epoxy coated ductile iron bodies, stainless steel discs and EPDM seats. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of wafer and fully lugged (see models) butterfly valves incorporating plastic bodies & discs and an EPDM seat. Maximum working pressure 16.0 bar Maximum operating temperature 100°C.
Range of lugged and wafer type butterfly valves with blue epoxy coated bodies, incorporating EPDM rubber ‘O’-rings and seat, and either a bronze (AB2), stainless steel (CF8 & CF8M) or blue epoxy coated or nickel plated, ductile iron (DI) disc. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of flow control valves with (chromium plated brass bodies) incorporating a ceramic cartridge headwork with single lever operating members and stainless-steel braided supply hoses. Maximum working pressure 10.0 Bar. Maximum operating temperature 70.0°C.
Range of manually operated flow control valves with brass bodies and either ¼ turn or ½ turn ceramic disc headworks (refer to model). The products are available with trim sets and operating members in various finishes (refer to models). Maximum working pressure 5.0 bar. Maximum operating temperature 85⁰C.
Range of non-return, swing gate valves with bronze, DZR brass or brass bodies and DZR brass, bronze or brass discs. Maximum working pressure 20.0 bar or 16.0 bar (please refer to model) Maximum operating temperature 85°C.
Range of in-line, manually adjustable pressure reducing valves with DZR brass bodies. The RP1XX and RP2xx models can be supplied with a low- or high-pressure spring. The RP800 model is only available with a high-pressure spring. The RP1XX and RP2xx models can be pre-set from the factory at any value between the spring adjustment range (see below), e.g., the RP135 model will have a high-pressure spring and is pre-set at 3.5 bar. The RP800 is provided pre-set from the factory at 2.8 bar. Maximum inlet supply pressure 5.0 bar. Low-pressure spring adjustment range between 1.0 bar - 2.0 bar. High-pressure spring adjustment range between 2.1 - 5.0 bar. Cold water use only.
Range of angled pressure relief valves (3.5 & 6.0 Bar) with DZR brass bodies. PREL107020 is for use with copper pipe manufactured to BS EN 1057. Maximum working pressure 10.0 Bar. Maximum operating temperature 90°C.
Pressure relief valve (pre-set to 6 bar outlet pressure) with a DZR brass body. Maximum working pressure 6.0 bar. Maximum operating temperature 75°C.
Range of pressure relief valves with gunmetal bodies and a lever operated easing gear. All have a pre-set pressure, ranging from 1.0 - 12.5 bar. Maximum operating temperature 95°C.
Range of pre-set pressure relief valves with gunmetal bodies and a lever operated easing gear. Pre-set relief pressures: 1.0 bar to 10.5 bar. Maximum operating temperature 95°C.
Range of spherical valves, with DZR brass bodies and chromium plated brass balls. The products can be supplied with various operating members (see model). Maximum working pressure 40.0 bar. Maximum operating temperature 85°C.
Range of in-line hex key operated spherical valves incorporating nickel plated or chromium plated brass bodies and chromium plated brass balls. The compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Quarter turn, butterfly operated spherical valves with nickel plated brass bodies, chrome plated brass balls and PTFE seals. For use with copper pipe BS EN 1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of press fit spherical valves with brass and chrome plated brass bodies. For use with copper pipe to BS EN 1057. Maximum working pressure 16.0 Bar Maximum operating temperature 85 °C.
Range of screwdriver operated spherical valves with brass or chrome plated brass bodies Compression fittings for use with copper pipe to BS EN 1057. Maximum working pressure 8.0 Bar Maximum operating temperature 80 °C.
Range of straight isolation spherical valves in Brass or Nickle-Plated Brass. Models have screwdriver or butterfly operating members. Maximum working pressure 10.0 or 16.0 bar. Maximum operating temperature 85°.
Range of spherical valves with (bronze or brass bodies) incorporating a brass or stainless-steel ball with PTFE seat. B40 Bronze range - Maximum operating pressure - 40 bar. Maximum operating temperature 85°C. B10 Brass range - Maximum operating pressure - 25 bar. Maximum operating temperature - 85°C.
Range of spherical valves with bronze bodies incorporating a brass or stainless-steel ball with PTFE seat. Maximum operating pressure - 40 bar. Maximum operating temperature 85°C.
Range of lever operated spherical valves with nickel plated brass bodies Max working pressure: 20 bar. Max operating temperature: 85°C.
Range of spherical valves with nickel plated brass bodies, nickel plated brass ball and PTFE seats. The LD 47.300.XX and LD 47.302.XX models have a butterfly handle. The LD 47.301.XX and LD 47.303.XX models have a lever operating member (normal and special type). The LD 47.340.XX and LD 47.342.XX models have a T-handle. Maximum working pressures: ½” - 1” sizes: 40.0 bar, 1¼” - 2” sizes: 25.0 bar. Maximum operating temperature 100°C.
Range of spherical valves with either DZR brass Nickel-plated brass or chromium plated brass bodies, nickel plated brass ball and PTFE seats. With either lever or butterfly operating members. Some models incorporate a stainless-steel filter. Compression models for use with copper pipe manufactured to EN 1057. Maximum working pressure: 10 Bar. Maximum operating temperature: 85°C.
Range of spherical valves with (bronze or brass bodies) incorporating a brass or stainless-steel ball with PTFE seat. The MV10-11240 range - Maximum operating pressure - 40 bar. Maximum operating temperature 85°C. The MV10-11202 range - Maximum operating pressure - 25 bar. Maximum operating temperature - 85°C.
Range of spherical valves with bronze bodies incorporating a brass or stainless-steel ball with PTFE seat. The ART 340 range - Maximum operating pressure - 40 bar. Maximum operating temperature 85°C.
Range of spherical valves with (bronze or brass bodies) incorporating a brass or stainless-steel ball with PTFE seat. The VAB501 range - Maximum operating pressure - 40 bar. Maximum operating temperature 85°C.
Range of straight, angled, tee and Y shaped isolation valves incorporating brass bodies, NBR ‘O’-rings or PTFE seats depending on model variant. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of plastic bodies spherical valves (black, white and grey) incorporating either a screwdriver slot, lever or handwheel operating member (model specific). The pushfit connections are for use with DM LLDPE tubing (not supplied) and PEX barrier pipe (manufactured to BS7291-3). When used with DM LLDPE tubing (not supplied) the supplied black or grey pipe inserts must be installed. When used with PEX barrier pipe the supplied beige pipe inserts must be installed. Maximum working pressures and temperatures: When used with DM LLDPE tubing: 6-15mm and ¼”-½” pushfit: 12.0 bar, cold water use only and 7.0 bar @ 65°C. When used with PEX Barrier pipe (manufactured to BS7291-3): 15-22mm, 5/8” and 7/8” pushfit: 12.0 bar, cold water use only and 7.0 bar @ 65°C. Fittings which incorporate 10mm barb connections: 12.0 bar, cold water use only. Fittings which incorporate ½” - ¾” barbed end connections are open outlet use only.
Range of press fit gate valves with brass bodies. For use with copper pipe to EN1057. Maximum working pressure 16.0 Bar Maximum operating temperature 85 °C.
Range of non-rising spindle gate valves with DZR brass or brass bodies, incorporating PTFE stem packing and gaskets and handwheel operating members. Maximum working pressure 16.0 Bar Maximum operating temperature 85°C
Range of gate valve with ductile iron bodies, wedge and bonnet (blue epoxy powder coated). Valves are operated via a non-rising spindle headwork. Maximum working pressure 16.0 Bar Maximum operating temperature 99.0°C
‘Z123’ range of gate valves with either brass or DZR brass bodies and PTFE washers. Valves are operated via a non-rising spindle headwork with a wheel type operating member. Maximum working pressure 16.0 or 20.0 Bar Maximum operating temperature 85.0°C
Range of gate valves with ductile iron bodies (blue epoxy coated), EPDM discs and non-rising spindles with hand wheel operating members. Maximum working pressure 10.0 Bar Maximum operating temperature 80.0°C
Range of non-rising spindle gate valves with DZR brass bodies. Operating members are either handwheel operated or lockshield. Maximum working pressure: 20.0 bar. Maximum operating temperature: 100°C.
Range of gate valves with brass bodies and wedges. The valves are operated via a non-rising spindle with a hand wheel operating member. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.
Range of gate valves with blue epoxy coated ductile iron bodies and EPDM coated ductile iron wedges. The valves are operated via a non-rising spindle with a hand wheel operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of gate valve with ductile iron bodies, wedge and bonnet (blue epoxy powder coated). Valves are operated via a non-rising spindle headwork. Maximum working pressure 16.0 Bar Maximum operating temperature 99.0°C
Range of non-rising spindle gate valves with DZR brass bodies. Operating members are either handwheel operated or lockshield. Maximum working pressure: 20.0 bar. Maximum operating temperature: 100°C.
Range of screw down valves with brass or DZR brass bodies, brass or DZR brass bonnets, EPDM washers and PTFE seats. Compression connection to be used with copper pipe manufactured to EN1057. Maximum working pressure 16 bar. Maximum operating temperature 85°C.
Range of screw down stop valves with brass or chrome plated brass bodies and EPDM seals. For use with copper pipe to EN1057. Maximum working pressure 16.0 Bar Maximum operating temperature 85 °C.
Range of press fit screw down stop valves with brass bodies and EPDM seals. For use with copper pipe to EN1057. Maximum working pressure 16.0 Bar Maximum operating temperature 85 °C.
Range of handwheel operated bronze bodied stop valves. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.
Range of stop valves with either DZR brass or brass bodies (see models) with T-type operating members. The 15mm, 22mm and 28mm compression sizes are for use with copper pipe (manufactured to EN 1057). The 20mm and 25mm compression sizes are for use PE pipes (manufactured to EN 12201-2). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of balancing valves with bronze bodies and DZR brass bonnets. Maximum working pressure 20.0 bar. Maximum operating temperature 85⁰C.
Range of double regulating valves with DZR brass, products incorporate a non-rising spindle headwork. Products also include two test ports. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of UV disinfection units with stainless steel bodies. Maximum working pressure 10.0 bar. Cold water use only.
'Powercron® 6070 B coating'. Factory applied, black coloured resin based coating. Apply as per manufacturer's TDS 'CR607B/CP588B'. Cure for 30 minutes@180°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.
Page 165 of 209
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
