Wall mounted bath spout incorporating a brass body (various finishes) and a plastic aerator. Maximum operating temperature 60°C.
Wall mounted spout outlet (various finishes, see model) incorporating a plastic flow straightener. Maximum operating temperature 60°C.
Range of expansion vessels incorporating butyl rubber diaphragms. Maximum working pressure, see model. Cold water use only.
Talbot range of self tapping ferrule straps with plastic bodies and a nitrile rubber seal. The product incorporates either a ¾” BSP (M) connection or a 25mm or 32mm push fit connection on the outlet from the cutting arm. For below ground use only. Maximum working pressure 16.0 bar. Cold water use only.
Range of clamp fittings incorporating DZR brass bodies, EPDM ‘O’-rings. For use with Uponor PE 100 RC pipe to EN12201 only. Maximum working pressure 16.0 bar. Maximum operating temperature 20°C.
Range of stainless-steel press fittings with EPDM ‘O’-rings and EPDM washer (Live joint with BSP female thread models only) for use with stainless-steel pipe. Joints are achieved using a press fitting tool. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.
Range of copper solder ring fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of brass and DZR brass compression fittings for use with copper tube to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
‘EPH_WSP19’ Range of brass bodied fittings for use with copper pipe, some fittings are to be soldered with copper pipe (see models). Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.
Range of rigid ductile iron couplings (copper colored alkyd enamel) (Style 606-EN), Vic-flange adapter’s (Style 641-EN) and grooved copper fittings (No. 610, 611, 620, 625, 650 & 660 –EN) for use with grooved copper tubing (manufactured to EN 1057 R250). Above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Fluidfit range of hose barb fittings/stem fittings with push fit connections. Also with EPDM ‘O’-rings. 12 & 15mm models are for use with LLDPE pipe, 22mm models are for use with PEX pipe. Cold water use only Maximum working pressure 10.0 Bar
Range of copper end feed fittings for use with copper tube. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Range of dual flush WC syphons incorporating a polypropylene body, stainless steel C link and a LDPE sealing washer. The valve is to be operated via a handle lever. Cold water use only.
Range of urinal autosyphons with a plastic body & supplied with plastic backnuts.
Range of stainless steel plate heat exchangers. The product incorporates a stub pipe with a ½” BSP (F) end connection on the secondary flow (outlet) which can accommodate a control sensor and strap on limit thermostat, (neither of which are supplied or considered part of the approval listing). Maximum working pressure 10.0 bar. Maximum working temperature 85°C.
Type "J" range of plate heat exchangers with stainless steel (AISI 304L) bodies and copper welding. Maximum working pressure 3.0 bar (Primary Circuit) and 10.0 bar (Secondary Circuit). Maximum operating temperature 80°C.
Range of modular combined heating interface units providing a combination of either hot water, heating or cooling via a plate heat exchanger depending on model options. Heating and cooling circuits incorporate a safety relief valve (set at 3 bar) and expansion vessel and inlet connection can be either top or bottom entry configuration. Maximum working pressure 16 bar (primary, CWS and HWS) 2.5 bar on heating circuit. Maximum operating temperature 85°C.
Range of ‘HYCO’ electric instantaneous water heaters with plastic bodies, NBR and silicone ‘O’-rings. The inlet of model IN96T incorporates a plastic strainer. Maximum working pressure 7.5 bar. Maximum operating temperature 60°C.
‘Hydraulic Block 2’ range of integrated water circuits for use with combination boilers comprising of a plastic body, stainless steel thermistors and a plate heat exchanger. The primary circuit incorporates a pump assembly. Maximum working pressures: Primary Circuit 2.5 bar. Secondary Circuit 10.0 bar. Maximum operating temperatures: Primary circuit 85˚C. Secondary circuit 65°C. Cold supply only.
Water meter with a brass body, NBR ‘O’-rings and EDPM washers. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Cold water use only.
Page 13 of 560
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
