Hyco Manufacturing Ltd Approvals


#1910311

Range of vented, wall mounted, catering water boilers with a capacity from 3 to 25 litres. The boilers incorporate a stainless steel storage tank fed via a solenoid valve. The water level is controlled with level sensors and water is dispensed via a draw off tap. Maximum working pressure 10 bar. Maximum operating temperature 95°C.

Section:
0060 Boilers
Section Subtitle:
Catering, Feed Cistern or Pressure.
WRAS Approval Number:
1910311
Expiry date:
31/10/2024
Size:
½” BSP (M)
Marking:
Hyco on front cover
Installation Requirements:
R001 R040 R150 R170 R510
Model:
MBS3, MBS6, MBS8, MBS16, MBS25, MBS3SS, MBS6SS, MBS8SS, MBS16SS & MBS25SS.
Factor:
Hyco Manufacturing Ltd
Company Name
Hyco Manufacturing Ltd
Address
California Drive, Castleford, West Yorkshire
Postcode
WF10 5QH

View All Listings by this Company

Print This Approval


#2007344

Range of ‘HYCO’ electric instantaneous water heaters with plastic bodies, NBR and silicone ‘O’-rings. The inlet of model IN96T incorporates a plastic strainer. Maximum working pressure 7.5 bar. Maximum operating temperature 60°C.

Section:
1360 Heaters
Section Subtitle:
Electric instantaneous, mains fed, closed outlet. Heat retained in instantaneous water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2007344
Expiry date:
31/07/2025
Size:
½” BSP male inlet/outlet
Marking:
Hyco, serial number, model, manufacturer, address, contact No, product code and other technical information side of unit.
Installation Requirements:
R001
Model:
IN44T, IN60T, IN96T, IN44 & IN60.
Manufacturer:
Hyco Manufacturing Ltd
Company Name
Hyco Manufacturing Ltd
Address
California Drive, Castleford, West Yorkshire
Postcode
WF10 5QH

View All Listings by this Company

Print This Approval


#2104019

Range of unvented electric storage water heaters consisting of a mild steel, glass/enamel coated tank, heating element and pressure relief valve set at 6.0 bar. Maximum working pressure 5.5 bar. Maximum operating temperature 75°C.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2104019
Expiry date:
30/04/2026
Size:
½” BSP (M) inlets and outlets
Marking:
Hyco logo on front of appliance. Technical information on adhesive label on side of appliance.
Installation Requirements:
R001 R140
Model:
Unvented 2kW version: SF05K (5 litre), SF10K (10 litre) & SF15K (15 litre). Unvented 1.2kW version: SF10K12 (10 litre) & SF15K12 (15 litre).
Factor:
Hyco Manufacturing Ltd
Company Name
Hyco Manufacturing Ltd
Address
California Drive, Castleford, West Yorkshire
Postcode
WF10 5QH

View All Listings by this Company

Print This Approval


#2111024

OMEG range of wall mounted, near-boiling water dispensers (cased and insulated). The products incorporate a solenoid valve which controls the flow, a stainless-steel tank, 3 or 5L (see model), and a plastic strainer at the inlet. Maximum supply pressure 10.0 bar. Cold water supply only. Maximum operating temperature 95˚C

Section:
1380 Heaters
Section Subtitle:
Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2111024
Expiry date:
30/11/2026
Size:
¾” BSP (M) inlet.
Marking:
HYCO on front of unit. HYCO & OMEG on technical label.
Installation Requirements:
R001 R040
Model:
OMEG3 and OMEG5
Factor:
Hyco Manufacturing Ltd
Company Name
Hyco Manufacturing Ltd
Address
California Drive, Castleford, West Yorkshire
Postcode
WF10 5QH

View All Listings by this Company

Print This Approval


#2205027

Catering tap with chromium plated brass body and bonnet, incorporating silicone seat cups with single lever operating member. Maximum working pressure 0.1 bar. Maximum operating temperature 98°C.

Section:
1815 Taps
Section Subtitle:
Water heaters, gravity and low-pressure applications.
WRAS Approval Number:
2205027
Expiry date:
31/05/2027
Size:
3/8” BSP (F)
Marking:
HYCO on body of tap
Installation Requirements:
R001 R040
Model:
DE TAP
Factor:
Hyco Manufacturing Ltd
Company Name
Hyco Manufacturing Ltd
Address
California Drive, Castleford, West Yorkshire
Postcode
WF10 5QH

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.