Range of brass and copper end feed fittings for use with copper pipe (manufactured to EN 1057). For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251202002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Endex and size on body of fitting

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

N6 - Reducer, larger end male - 88310 (66.7 x 28mm), N6 - Reducer, larger end male - 88311 (66.7 x 35mm), N6 - Reducer, larger end male - 88312 (66.7 x 42mm), N6 - Reducer, larger end male - 88313 (66.7 x 54mm), N6 - Reducer, larger end male - 89624 (76.1 x 35mm), N6 - Reducer, larger end male - 89625 (76.1 x 42mm), N6 - Reducer, larger end male - 89626 (76.1 x 54mm), N6 - Reducer, larger end male - 89630 (108 x 42mm), N6 - Reducer, larger end male - 89631 (108 x 54mm), N6 - Reducer, larger end male - 89699 (133 x 42mm), N6 - Reducer, larger end male - 89700 (133 x 54mm), N6 - Reducer, larger end male - 89704 (159 x 54mm), N25 - Tee, reduced branch - 88807 (66.7mm x 28mm), N25 - Tee, reduced branch - 89055 (66.7mm x 35mm), N25 - Tee, reduced branch - 89056 (66.7mm x 42mm), N25 - Tee, reduced branch - 89057 (66.7mm x 54mm), N25 - Tee, reduced branch - 89058 (76.1mm x 28mm), N25 - Tee, reduced branch - 89000 (76.1mm x 35mm), N25 - Tee, reduced branch - 89654 (76.1mm x 42mm), N25 - Tee, reduced branch - 89001 (76.1mm x 54mm), N25 - Tee, reduced branch - 89059 (108mm x 35mm), N25 - Tee, reduced branch - 89660 (108mm x 54mm), N25 - Tee, reduced branch - 89715 (133mm x 54mm), N25 - Tee, reduced branch - 89717 (159mm x 54mm),

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Type ‘J’ range of plate heat exchangers with stainless steel (AISI 304L or AISI 316L) fin and end plates. Maximum working pressure 3.0 bar (primary circuit) and 10.0 bar (secondary circuit). Maximum operating temperature 80°C.

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) Primary circuit. ½” BSP (M) Sanitary circuit.

Marking:

Condevo S.p.A. and model on adhesive label on body

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

Type ‘J’ range comprising of: PP10FJX. PP12FJX. PP14FJX. PP16FJX. PP18FJX. PP20FJX. PP22FJX. PP24FJX. PP26FJX. PP28FJX. PP30FJX. PP32FJX. PP34FJX. X denotes the body material and is replaced with: 4 = AISI304L 6 = AISI316L

Approval Holder:

Condevo SpA

Company Name

Condevo SpA

Address

Via Luna, Z.A. 26866 Marudo (LO) Italy

View All Listings by this Company

Range of pressure transmitters with stainless steel bodies. Maximum working pressure 100.0 Bar Maximum operating temperature 80.0°C (Type 540) or 100.0°C (Type 520 & Type 522)

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models

Marking:

Huba Control logo and technical info on body

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

Type 520: Dimension, Sealing type, Male/Female Thread 7/16"-20 UNF, sealing cone 45°, Female 7/16"-20 UNF, sealed at front ISO 11926-1 Male G1/4", sealed at front, Female 1/2"-14 NPT, thread sealing, Male 1/2"-14 NPT, thread sealing, Female 7/16"-20 UNF, sealing cone 45°, Male G1/8", sealed at front, Male G1/4", sealed at back without sealing groove, Male G1/4", sealed at back ISO 1179-2, Male G1/4", sealed at back + Manometer, Male G1/4", sealed at front, Female G1/4", sealed at front + Manometer, Male G1/4", sealed at back DIN 3852-2, Male R1/4", thread sealing EN 10226, Male G1/2", sealed at front, Male M20x1.5, sealed at front + Manometer, Male 7/16"-20 UNF, sealing cone with schrader, Female Type 522: Dimension, Sealing type, Male/Female Thread 7/16"-20 UNF, sealing cone 45°, Female 1/2"-14 NPT, thread sealing, Female 7/16"-20 UNF, sealing cone 45°, Male G1/4", sealed at back ISO 1179-2, Male G1/4", sealed at back + Manometer, Male G1/2", sealed at front, Male G1/2", sealed at front + Manometer, Male M20x1.5, sealed at front + Manometer, Male Type 540: Dimension, Sealing type, Male/Female Thread G1/4", sealed at front, Female 7/16"-20 UNF, sealing cone 45°, Male G1/4", sealed at back ISO 1179-2, Male R1/4", thread sealing EN 10226, Male Additional Information The pressure orifice and the connectors are all made from stainless steel X2CrNiMo17-12-2/1.4404 / AISI316L. The Schrader is made from Stainless X8CrNi18-9/1.4305/303 All variants can use the following pressure cell options, based on application requirements: -1…9 Bar / 0…2.5 - 100 bar (Stainless Steel Cell X6Cr17-1.4016) The only difference between the models 520, 522 & 540 is the input and output signal, and the approvals (not relevant to WRAS) All the different type variants can be given a unique customer article number, to trace the full specification: Example: 520.99XXX 520 = Model Type 99 = Client / project specific number XXX = Unique file for client containing all the above options specified within model.

Manufacturer:

Huba Control AG

Company Name

Huba Control AG

Address

Industriestrasse 17, CH-5436 Wurenlos, Switzerland

View All Listings by this Company

Range of electric water pumps, with stainless steel bodies, shaft and either stainless steel or plastic impellors. Maximum working pressure 8.5 Bar. Maximum operating temperature: See models.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251202728

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (F)

Marking:

Felsom, model and technical data on data plate on body

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

U 3A-90/4; U 3A-100/5 - 35 °C U 3A-90/4 T; U 3A-100/5 T - 35 °C U 5A-120/4 ; U 5A-150/5 - 35 °C U 5A-120/4 T; U 5A-150/5 T - 35 °C U 3SA-90/4; U 3SA-100/5 - 80 °C U 5SA-120/4; U 5SA-150/5 - 80 °C U 3SA-90/4 T; U 3SA-100/5 T - 80 °C U 5SA-120/4 T; U 5SA-150/5 T - 80 °C

Product Images

Approval Holder:

Exa Pumps SrL

Company Name

Exa Pumps SrL

Address

Via Tre Confini, 23 22010 Gera Lario CO

Country

Italy

Phone

0039 0344 910054

General Email

infor@exapumps.com

View All Listings by this Company

MBC 12-22WM & MBC 12-28WM models are wall mounted mains supply booster sets. They are supplied with two spherical isolation valves, a spherical bypass valve and two single check valve assemblies (suitable for backflow protection against Fluid Category 2). The check valve assemblies are to be installed in accordance with the manufacturers instructions, one upstream of the pump inlet and one after the bypass valve. The booster pump incorporates a plastic strainer on the inlet and a plastic flow regulator on the outlet and is housed within a wall mounted cabinet. MJ3 VM & MJ3 HM models are mains supply booster sets intended to be mounted on an expansion vessel (not supplied as part of the approval). They comprise of a pump, a suction and discharge manifold with bypass arrangement, and a spherical bypass valve which incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The booster pump incorporates a plastic strainer on the inlet and a plastic flow regulator on the outlet. Maximum working pressure: 6.0 bar. Maximum operating temperature: 35oC.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251208701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

MBC 12-22WM & 12-28WM models: Quadruple layered flexible hoses consisting of a black coloured TPE inner layer, PVC middle layer, braided PE third layer and white coloured PVC outer layer with 15mm pushfit end connections. MJ3 VM & HM models: Stainless steel braided EPDM lined flexible hose assemblies with 22mm pushfit end connections.

Marking:

Stuart Turner, Stuart Turner logo, mains boost, model no., pressure, temperature and other technical information on adhesive label on pump. Stuart Turner on pump body.

Installation Requirements:

R001 R415

Expiry date:

31/12/2030

Model:

Part code 44725: Mainboost charger MBC 12-22WM. Part code 44726: Mainboost charger MBC 12-28WM. Where: MBC = Range name: Mainsboost Charger. 12 = maximum pumped flow in l/min. 22 or 28 = 22mm or 28mm sizes bypass fittings supplied. WM = wall mounted. Part code 41712: Mainboost charger MJ3 VM. Part code 41729: Mainboost charger MJ3 HM. Where: MJ = MJ pump, version 3. VM = vertical vessel mounted. HM = horizontal vessel mounted.

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of booster pumps with stainless steel inlet manifolds, plastic bodies and impellers. The product incorporates a non-return valve. The ESYBOX MAX single models are also supplied with an optional 2” BSP (M) x 1¼” BSP (F) plastic inlet adaptor. Maximum working pressure 12.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

260102719

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2” BSP (F) with a 2” BSP (M) to 1.1/4” BSP (F) adaptor.

Marking:

DAB, WRAS, model name and other technical information on label on body

Installation Requirements:

R001 R415

Expiry date:

31/01/2031

Model:

ESYBOX MAX 45/120 M (Single Pump), ESYBOX MAX 45/120 T (Single Pump), 2 ESYBOX MAX 45/120 M (Double Pump), 2 ESYBOX MAX 45/120 T (Double Pump), 3 ESYBOX MAX 45/120 M (Triple Pump), 3 ESYBOX MAX 45/120 T (Triple Pump). Models added March 2026: ESYBOX MAX 60/120 T (Single Pump), ESYBOX MAX 60/120 M (Single Pump), 2 ESYBOX MAX 60/120 M (Double Pump), 3 ESYBOX MAX 60/120 M (Triple Pump), 2 ESYBOX MAX 60/120 T (Double Pump), 3 ESYBOX MAX 60/120 T (Triple Pump), ESYBOX MAX 85/120 T (Single Pump), 2 ESYBOX MAX 85/120 T (Double Pump), 3 ESYBOX MAX 85/120 T (Triple Pump).

Approval Holder:

DAB PUMPS SPA

Company Name

DAB PUMPS SPA

Address

Via Marco Polo 14 Mestrino (PD)

Postcode

35035

Country

Italy

General Email

certifications@dwtgroup.com

View All Listings by this Company

Circulation pumps with either bronze or stainless pump bodies and a plastic impeller. Maximum supply pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

260104703

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Ebara logo, model no., serial no. and technical information on data plate. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

EHW-B 25-4-130: 1” BSP (F), EHW-B 25-4-180: 1” BSP (F), EHW-B 25-5-130: 1” BSP (F), EHW-B 25-5-180: 1” BSP (F), EHW-B 25-6-130: 1” BSP (F), EHW-B 25-6-180: 1” BSP (F), EHW-B 25-7-180: 1” BSP (F), EHW-B 25-8-180: 1” BSP (F), EHW-B 25-12-180: 1” BSP (F), EHW-S 20-6-130: ¾” BSP (M), EHW-S 25-6-180: 1” BSP (F), EHW-S 25-7-180: 1” BSP (F), EHW-S 25-8-180: 1” BSP (F), EHW-S 32-8-180: 1¼” BSP (F). Where: B = Bronze body. S = Stainless steel body. 20/25/32 = DN size (mm). 4/5/6/7/8/12 = head (m). 130/180 = Pump body size (length from body inlet to outlet) (mm).

Approval Holder:

Ebara Corporation

Company Name

Ebara Corporation

Address

11-1 Haneda Asahi-cho Ota-ku, Tokyo 144-8510

Country

Japan

View All Listings by this Company

Range of shower outlets and shower sets, the inlet incorporates a single check valve cartridge (however the complete assembly has not been tested to demonstrate it provides adequate backflow protection). The product incorporates a flow regulator. Open outlet use only. Maximum operating temperature 70°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

260104018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

33095 & 66123 - Gessi etched on to body 58252 - Gessi etched on to rosette 57801 - Gessi etched on to shower face 57409 – Gessi & other info printed on adhesive label on body

Installation Requirements:

R001 R040

Expiry date:

31/01/2031

Model:

66123 – Origini - Shower set 33095 – Ispa - Wall mounted headshower 57409 – Afilo - Ceiling mounted headshower 57801 – Acciaio - Ceiling mounted headshower 58252 – Inciso - Ceiling mounted headshower

Approval Holder:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi Hamlet Vintebbio Serravalle Sesia

Postcode

13037

Country

Italy

Phone

+39 0163 454111

General Email

pfornara@gessi.it

View All Listings by this Company

Section:

1650 Shower Outlets

Description:

A Range of Shower head(s) and/or shower handset(s).

Ceiling Mounted. Undefinable Airgap - See IRNs.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

31/01/2031

Approval Holder:

Xiamen Delmei Sanitary Ware Co Ltd

Company Name

Xiamen Delmei Sanitary Ware Co Ltd

Address

No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company

Manufacturers:

Xiamen Delmei Sanitary Ware Co., Ltd

Range of Y-patterned strainers with blue epoxy coated ductile iron bodies and a stainless-steel mesh strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50-DN400 flanged.

Marking:

ZHEJIANG VALOGIN TECHNOLOGY CO., LTD. logo (‘V&G’), WRAS, PN, DN, material and flow arrow on body.

Installation Requirements:

R001 R120

Expiry date:

31/01/2031

Model:

45.91201.F20.CP36-2030 (DN50), 45.91201.F25.CP36-2030 (DN65), 45.91201.F32.CP36-2030 (DN80), 45.91201.F40.CP36-2030 (DN100), 45.91201.F50.CP36-2030 (DN125), 45.91201.F65.CP36-2030 (DN150), 45.91201.F80.CP36-2030 (DN200), 45.91201.10F.CP36-2030 (DN250), 45.91201.12F.CP36-2030 (DN300), 45.91201.15F.CP36-2030 (DN350), 45.91201.20F.CP36-2030 (DN400).

Approval Holder:

Zhejiang Valogin Technology Co., Ltd.

Company Name

Zhejiang Valogin Technology Co., Ltd.

Address

Qinggang Technological Industrial Zone Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Valogin Technology Co., Ltd.

Company Name

Zhejiang Valogin Technology Co., Ltd.

Address

Qinggang Technological Industrial Zone Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Section:

1800 Taps

Description:

A Range of Pillar tap(s).

Deck Mounted Capable of Achieving AUK2 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R005

Expiry date:

31/01/2031

Approval Holder:

LECICO Plc.

Company Name

LECICO Plc.

Address

2D VIKING INDUSTRIAL ESTATE HUDSON ROAD BEDFORD

Postcode

MK410QB

General Email

jrichards@lecico.co.uk

View All Listings by this Company

Section:

1820 Taps

Description:

A Range of Self closing tap(s).

Deck mounted Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8" captive nut end connections. Capable of achieving AUK3 Tap Gap

Installation Requirements:

R001 R006 R009

Expiry date:

31/01/2031

Notes & Further Information

S : for satine finish BK : for Black finish

Approval Holder:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company

Manufacturers:

Delabie SAS

Range of TPE and ISIFLEX flexible hose assemblies incorporating EPDM ‘O’-rings and various end connections. Maximum operating temperature 60°C. Open outlet use only.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

260202010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

IL FLESSIBILE logo, WRAS and date of manufacture (YYYY/MM) on ferrule.

Installation Requirements:

R001

Expiry date:

28/02/2031

Model:

FPE2MX.SMWWYYYYZZZ FPF2MX.SLWWYYYYZZZ Where X denotes the fitting size, and can be replaced with any of the following, for example: A = ½” BSP (F) x ½” BSP (F) B = ½” BSP (F) x 15x1M F = ½” BSP (F) x 3/8” BSP (M) H = ½” BSP (F) x 3/8” BSP (F) I = 15x1M x 15x1M L = 15x1M x 3/8” BSP (M) M = 15x1M x 3/8” BSP (F) Q = 3/8” BSP (M) x 3/8” BSP (M) R = 3/8” BSP (M) x 3/8” BSP (F) S = 3/8” BSP (F) x 3/8” BSP (F) T = ½” BSP (F) x 12x1M U = ½” BSP (F) x 10x1M Where WW denotes the hose finish, and can be replaced with any of the following, for example: DK = Black (SL Model), PL = White (SL Model), CR = Chrome (SM Model), BN = Brushed Nickel (SM Model), RG = Red Gold (SM Model), GO = Gold (SM Model), BC = Black (SM Model). Where YYYY denotes the fitting finish, and can be replaced with any of the following, for example: 0811 = 08 – Conical nut G1/2F h29 Chrome 11 – Conical nut G1/2F h29 Chrome Where ZZZ denotes then hose length, and can be replaced with any of the following, for example: 050 = 500mm 200 = 2000mm

Approval Holder:

IL FLESSIBILE di Nicastri e C srl

Company Name

IL FLESSIBILE di Nicastri e C srl

Address

VIA FELICE VEDANI 16 INVORIO

Postcode

28045

Country

Italy

Phone

+39 335 5948283

General Email

g.buratti@ilflessibile.it

View All Listings by this Company

Section:

2000 Shower Valves

Description:

A Shower valve(s) with manual temperature control.

Wall Mounted Concealed Undefinable airgap - see IRNs

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

31/01/2031

Approval Holder:

Waterworks Ltd

Company Name

Waterworks Ltd

Address

60 Backus Avenue Danbury

Postcode

CT06810

Country

United Kingdom

View All Listings by this Company

Range of concealed flow controls (brass body with various finishes) incorporating two, quarter turn ceramic disc headworks with single lever operating members controlling the flow to an external outlet (not supplied). Model BK2 is a flow control with adjustable bracket and collection box. Model BK2A is a flow control with bracket. Model BK2B is a flow control. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

260102015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Outlet hose must be installed where light is excluded. Water collection box discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

½” captive nut end connections.

Marking:

Vola on operating member

Installation Requirements:

R001 R007 R009 R010 R040

Expiry date:

31/01/2031

Model:

VOLA BK2, VOLA BK2A & VOLA BK2B VOLA BK2 – Mixer with Adjustable Bracket and water collection box VOLA BK2A – Mixer with Bracket VOLA BK2B – Mixer Alone Models with Brass and Stainless Steel operating members. Brass and Stainless Steel handles are available with different surface finishes. Suffix in the end of the product name indicate the surface finish and denotes: For Stainless Steel: 40=Brushed Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold, 71=Brushed Dark Copper. For Brass: 02=Grey, 04=Light Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Polished Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 66=Dark Gold, 68=Silver, B61=Brushed Black, B64=Brushed Copper, B69=Brushed Silver, B70=Brushed Gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Range of concealed wall mounted manual blending valve assemblies (brass bodies – various finishes) incorporating a quarter turn ceramic disc headwork with a dome type operating member. The inlets incorporate an approved check valve cartridge, (however the complete assembly has not been tested to demonstrate it provides adequate backflow protection) Maximum working pressure 10 bar. Maximum operating temperature 70°C

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

260104020

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Keuco etched on face plate

Installation Requirements:

R001 R010 R040

Expiry date:

31/01/2031

Model:

59541xxy1zz 59541xxy2zz 59541000170 - Installation unit concealed for stop valve DN15 w. wall outlet for shower hose xx = 01 chrome plated; 02 polished bronze; 03 brushed bronze; 04 polished nickel; 05 brushed nickel; 07 stainless steel finish; 12 polished black chrome; 13 brushed black chrome; 17 aluminium finish; 21 stainless steel finish, 25 brushed brass, 29 brushed red gold, 35 brushed titan black, 37 black matt

Approval Holder:

KEUCO GmbH & Co. KG

Company Name

KEUCO GmbH & Co. KG

Address

Oesestr. 36 Hemer

Postcode

58675

Country

Germany

Phone

+49 2372 / 904-265

General Email

info@keuco.de

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control

Wall mounted concealed Undefinable Air Gap – See IRN’s Incorporates a check valve cartridge (however the complete assembly has not been fully tested to demonstrate it provides backflow protection)

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

31/01/2031

Notes & Further Information

Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish. Product needs to be installed with the dedicated basic set.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturers:

Hansgrohe SE

Section:

2010 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

31/10/2030

Model:

RNDSCBV2.MB AQ150BAR2 300RSC TWBAR2.21 AQ150BAR2.MB TS150BAR2 126HP 126HP.MB AQSQBAR2 TSSQBAR2 408HP 300SSC AQSQBAR2.MB

Notes & Further Information

The “*” is for a different Overhead Shower, Shower Hose or Shower Handset, which represent the letters A to Z X XXX Denotes the following: First X: Different handle The second, third & fourth XXX for different finishes: Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control

Wall Mounted Undefinable Air Gap - See IRN's

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

31/01/2031

Notes & Further Information

* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black

Approval Holder:

WINSDRUM Technology (Foshan) Co., Ltd

Company Name

WINSDRUM Technology (Foshan) Co., Ltd

Address

Room 804-805, Flat 2, Jiabang Guojin Center, No.1 Shilong South Road, Guicheng Street, Nanhai District, Foshan City, Guangdong Province

Country

China

Phone

0086-19527590441

General Email

carina07@126.com

View All Listings by this Company

Range of butterfly valves incorporating blue epoxy coated ductile iron bodies, stainless-steel discs and EPDM seats. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

250912061

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Name plate: Pressure rating “PN”, size “DN”, Disc material, seat material, ART no., CE logo, UKCA logo, ALBION logo, WRAS logo, max working temperature, max WRAS temperature. Body: ALBION, size” DN”, pressure rating “PN”.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

ART115 Wafer butterfly valve: DN32 - DN600, ART135 Lugged butterfly valve: DN32 - DN600, ART150 Double flanged butterfly valve: DN50 - DN1200.

Approval Holder:

Albion Valves (UK) Limited

Company Name

Albion Valves (UK) Limited

Address

9a Fallbank Industrial Estate Dodworth Barnsley

Postcode

S75 3LS

Country

United Kingdom

Phone

01226 729900

General Email

samjed@albionvalvesuk.com

View All Listings by this Company