Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250912058

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model) with a ceramic cartridge headworks and a single lever operating member. The spout outlet incorporates a pull-out spray with plastic aerator. The pull-out spray hose connector incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 0445 Combination Tap Assemblies
Section Subtitle:: Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:: 250912058
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
Marking:: Abode on body.
Installation Requirements:: R001 R009 R090
Expiry date:: 30/09/2030
Model:: ACT3073 ACT3074 ACT3075 ACT3082 ACT3076 ACT3087 ACT3088 ACT3089 ACT3122 ACT3090

Approval Holder:: Norcros Group (Holdings) Limited T/A Abode

Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road Barnsley
Postcode
S75 1HT
Country
United Kingdom
Phone
01226 283434
General Email
info@abode.eu

View All Listings by this Company

WRAS Approval Number: #250912054

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies -various finishes, see model) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator, (except for the MYKCOR002 & BLKCOR002 models). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:: 250912054
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:: SONAS on body
Installation Requirements:: R001 R006 R010
Expiry date:: 30/09/2030
Model:: UBR0246 UBR0271 MYKCOR002 BLKCOR002

Approval Holder:: Sonas Bathrooms

Company Name
Sonas Bathrooms
Address
103 Northwest Business Park Ballycoolin, Dublin 15
Postcode
D15 R88
Country
Ireland
General Email
2894475300@qq.com

View All Listings by this Company

WRAS Approval Number: #251103302

Section:: 0450 Combination Tap Assemblies
Description:: A Single hole tap(s) with a single outlet and a fixed spout.
Deck Mounted stainless-steel braided EPDM lined inlet hoses Capable of Achieving AUK3 Tap Gap Click type waste (not verified by test)
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Wastes	Includes
KM FRZ BAS3.5 C	Chrome	15mm compression	5 bar	65 °C	Bristan	Operating member	No	Ceramic cartridge	C-plate	Aerator	Click Type	Flow Regulator Fitted,

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

WRAS Approval Number: #260202302

Section:: 0450 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a fixed spout.
Deck Mounted Capable of achieving AUK 3 Some models are supplied with either a pop-up or click type waste, although these have not been verified by test. Supplied with PEX lined PA braided connection hoses.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 28/02/2031

Product Identification	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Wastes
71 550 xx0	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator	Pop Up
71 551 xx0	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator	Pop Up
71 557 xx0	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator	Pop Up
71 558 xx0	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator
71 559 xx0	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator
71 560 xx0	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator	Pop Up
71 561 xx0	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator	Pop Up
71 580 xx0	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator
71 584 xx0	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator	Pop Up
71 585 xx0	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator	Pop Up
71 589 xx0	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator	Click Type
71 593 xx0	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator	Pop Up
71 594 xx0	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator	Pop Up
71 598 xx0	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator	Click Type
71 526 xx0	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator
71 527 xx0	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator
71 528 xx0	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator
71 529 xx0	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator

Notes & Further Information: Where xx0 denotes the surface finish. It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Product Images

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

WRAS Approval Number: #260202006

Section:: 0450 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a fixed spout.
Deck mounted. Stainless-steel braided & PEX lined EPDM inlet hoses. Capable of achieving AUK3 Tap Gap.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 28/02/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Wastes
10 003 xx0	Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish	G 3/8	10 bar	60 °C	AXOR	on the body	Yes	Ceramic cartridge	Metal Backnuts	Aerator
10 001 xx0	Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish	G 3/8	10 bar	60 °C	AXOR	on the body	Yes	Ceramic cartridge	Metal Backnuts	Aerator	Pop Up
10 007 xx0	Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish	G 3/8	10 bar	60 °C	AXOR	on the body	Yes	Ceramic cartridge	Metal Backnuts	Aerator	Pop Up
10 102 xx0	Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish	G 3/8	10 bar	60 °C	AXOR	on the body	Yes	Ceramic cartridge	Metal Backnuts	Aerator	Pop Up
10 103 xx0	Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish	G 3/8	10 bar	60 °C	AXOR	on the body	Yes	Ceramic cartridge	Metal Backnuts	Aerator

Notes & Further Information: Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturers:: Hansgrohe SE

WRAS Approval Number: #251014303

Section:: 0470 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a swivel spout.
Deck Mounted Capable of Achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
247031 X XXX	VARIOUS	1/2" BSP	10.0 bar	65 °C	PPI	BODY	No	1/2 Turn ceramic disk	C-plate	Aerator & Flow Straightener
247032 X XXX	VARIOUS	1/2" BSP	10.0 bar	65 °C	PPI	BODY	No	1/2 Turn ceramic disk	C-plate	Aerator & Flow Straightener
247033 X XXX	VARIOUS	1/2" BSP	10.0 bar	65 °C	PPI	BODY	No	1/2 Turn ceramic disk	C-plate	Aerator & Flow Straightener

Notes & Further Information: X XXX Denotes the following: First X: Different handle option and the second, third & fourth XXX for different finishes: Handles: A – Lever or Dome type Chrome – No suffix, brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1

Approval Holder:: PPI Xiamen Industry Co., Ltd.

Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturers:: PPI XIAMEN INDUSTRY CO LTD

WRAS Approval Number: #251015311

Section:: 0470 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a swivel spout.
Deck Mounted Stainless Steel and Polyamide braided inlet hoses Capable of achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
526402	Chrome (CHR)	3/8"	10 bar	70 °C	BLANCO	body	Yes	Ceramic cartridge	Not Applicable	Aerator
526407	ANT/CHR	3/8"	10 bar	70 °C	BLANCO	body	Yes	Ceramic cartridge	Not Applicable	Aerator
526415	BLA/CHR	3/8"	10 bar	70 °C	BLANCO	body	Yes	Ceramic cartridge	Not Applicable	Aerator
526408	SGW/CHR	3/8"	10 bar	70 °C	BLANCO	body	Yes	Ceramic cartridge	Not Applicable	Aerator
526981	VGR/CHR	3/8"	10 bar	70 °C	BLANCO	body	Yes	Ceramic cartridge	Not Applicable	Aerator
526980	SOW/CHR	3/8"	10 bar	70 °C	BLANCO	body	Yes	Ceramic cartridge	Not Applicable	Aerator

Notes & Further Information: All surface finishes are not in contact with drinking water. The product structure (schedule of materials) of all versions are identical. Surface finish / color explanation: CHR - Chrome ANT - Anthracite BLA - Black Matt SGW - Silgranite White VGR - Volcano Grey SOW - Soft White

Approval Holder:: BLANCO GmbH + Co KG

Company Name
BLANCO GmbH + Co KG
Address
Flehinger Strasse 59 Oberderdingen
Postcode
75038
Country
Germany
General Email
certification-water@blanco.de

View All Listings by this Company

WRAS Approval Number: #250912059

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes, see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:: 250912059
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
Marking:: Abode on body.
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 30/09/2030
Model:: ACT3077 ACT3078 ACT3079 ACT3081 ACT3080 ACT3083 ACT3084 ACT3085 ACT3120 ACT3086

Approval Holder:: Norcros Group (Holdings) Limited T/A Abode

Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road Barnsley
Postcode
S75 1HT
Country
United Kingdom
Phone
01226 283434
General Email
info@abode.eu

View All Listings by this Company

WRAS Approval Number: #260202303

Section:: 0470 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a swivel spout.
Deck Mounted Stainless Steel and Polyamide braided, PE lined inlet hoses Capable of Achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 28/02/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Spout Outlet	Wastes
71 554 xx0	Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish	G 3/8	10 bar	60 °C	hansgrohe	on the body	Yes	Ceramic cartridge	Aerator	Pop Up
71 564 xx0	Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish	G 3/8	10 bar	60 °C	hansgrohe	on the body	Yes	Ceramic cartridge	Aerator	Pop Up
71 870 xx0	Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish	G 3/8	10 bar	60 °C	hansgrohe	on the body	Yes	Ceramic cartridge	Aerator
71 871 xx0	Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish	G 3/8	10 bar	60 °C	hansgrohe	on the body	Yes	Ceramic cartridge	Aerator
71 857 xx0	Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish	G 3/8	10 bar	60 °C	hansgrohe	on the body	Yes	Ceramic cartridge	Aerator
71 878 xx0	Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish	G 3/8	10 bar	60 °C	hansgrohe	on the body	Yes	Ceramic cartridge	Aerator

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturers:: Xiamen Lota International Co., Ltd.

WRAS Approval Number: #251115304

Section:: 0470 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a swivel spout.
Wall Mounted, Undefinable Air Gap – See IRN’s.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R040
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
K003*	Various	½" BSP (F)	10 bar	65 °C	WINSDRUM	On wall plate	No	1/4 Turn ceramic disk	Not Applicable	Aerator
K004*	Various	½" BSP (F)	10 bar	65 °C	WINSDRUM	On water outlet	No	1/4 Turn ceramic disk	Not Applicable	Aerator

Notes & Further Information: * denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black

Approval Holder:: WINSDRUM Technology (Foshan) Co., Ltd

Company Name
WINSDRUM Technology (Foshan) Co., Ltd
Address
Room 804-805, Flat 2, Jiabang Guojin Center, No.1 Shilong South Road, Guicheng Street, Nanhai District, Foshan City, Guangdong Province
Country
China
Phone
0086-19527590441
General Email
carina07@126.com

View All Listings by this Company

WRAS Approval Number: #250912053

Two hole, single outlet fixed combination tap assembly (brass body - various finishes, see model) incorporating quarter turn ceramic disc headworks with single lever operating members. The MYKCOR003 model incorporates an open outlet spout, all other models incorporate a plastic aerator. The products are supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 0510 Combination Tap Assemblies
Section Subtitle:: Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:: 250912053
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” BSP (M).
Marking:: SONAS on body.
Installation Requirements:: R001 R006 R010
Expiry date:: 30/09/2030
Model:: UBR0247 UBR0272 MYKCOR003 BLKCOR003

Product Images

Approval Holder:: Sonas Bathrooms

Company Name
Sonas Bathrooms
Address
103 Northwest Business Park Ballycoolin, Dublin 15
Postcode
D15 R88
Country
Ireland
General Email
2894475300@qq.com

View All Listings by this Company

WRAS Approval Number: #251115303

Section:: 0510 Combination Tap Assemblies
Description:: A Range of Two hole tap(s) with a single outlet and a fixed spout.
Deck Mounted Stainless steel braided PEX lined connection hose Stainless steel braided PEX lined inlet hoses Capable of Achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R007 R009 R010
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
SJS-WB100* **	Various	BSP 1/2" (F) Captive nut	10 bar	60 °C	Kind	Handle	No	Ceramic cartridge	Metal Backnuts	Aerator	Interconnecting Hoses,
SJS-WB200* **	Various	BSP 1/2" (F) Captive nut	10 bar	60 °C	Kind	Handle	No	Ceramic cartridge	Metal Backnuts	Aerator	Interconnecting Hoses,
SJS-WB101* **	Various	BSP 1/2" (F) Captive nut	10 bar	60 °C	Kind	Handle	No	Ceramic cartridge	Metal Backnuts	Aerator	Interconnecting Hoses,
JD-WB743* **	Various	BSP 1/2" (F) Captive nut	10 bar	60 °C	Kind	Spout	No	Ceramic cartridge	Metal Backnuts	Aerator	Interconnecting Hoses,

Notes & Further Information: The first * stands for the different handle A, B,C and D, if there is no handle, no first * ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:: Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

WRAS Approval Number: #250912055

Two hole, single outlet fixed combination tap assembly (brass body - various finishes, see model) incorporating quarter turn ceramic disc headworks with single lever operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic aerator, (except for the MYKCOR004(& BLKCOR004??? models). The products are supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 0520 Combination Tap Assemblies
Section Subtitle:: Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.
WRAS Approval Number:: 250912055
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: This approval does not include a shower hose and handset.
Size:: ¾” BSP (M).
Marking:: SONAS on spout.
Installation Requirements:: R001 R006 R020
Expiry date:: 30/09/2030
Model:: UBR0273 UBR0248 MYKCOR004 BLKCOR004

Product Images

Approval Holder:: Sonas Bathrooms

Company Name
Sonas Bathrooms
Address
103 Northwest Business Park Ballycoolin, Dublin 15
Postcode
D15 R88
Country
Ireland
General Email
2894475300@qq.com

View All Listings by this Company

WRAS Approval Number: #260403303

Section:: 0570 Combination Tap Assemblies
Description:: A Range of Two hole tap(s) with a double outlet and a swivel spout.
Deck Mounted Capable of Achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 30/04/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
VAL2 PSNK C CD	Crome	1/2" BSP (M)	5 bar	60 °C	Bristan	Handle	No	1/4 Turn ceramic disk	Metal Backnuts	Open Outlet

Notes & Further Information: Note - Both Products are the same, one is wall mounted, one is deck mounted.

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

WRAS Approval Number: #251115306

Section:: 0570 Combination Tap Assemblies
Description:: A Range of Two hole tap(s) with a double outlet and a swivel spout.
Deck Mounted. Capable of achieving AUK3 Tap Gap.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
2720065	Chromed	BSP 1/2" (M)	10 bar	85 °C	MVI	Rear of body	No	Non-rising spindle	Metal Backnuts	Flow Straightener
2720095	Chromed	BSP 1/2" (M)	10 bar	85 °C	MVI	Rear of body	No	1/4 Turn ceramic disk	Metal Backnuts	Flow Straightener

Approval Holder:: MVI Hazel Ltd.

Company Name
MVI Hazel Ltd.
Address
1 Mygan Business Park, Jamestown Road, Finglas, Dublin 11

View All Listings by this Company

WRAS Approval Number: #251108301

Section:: 0650 Combination Tap Assemblies
Description:: A Range of Three hole tap(s) with a single outlet and a fixed spout.
Deck mounted. Stainless steel braided TPSiV lined inlet hoses. Stainless steel braided TPSiV lined connection hoses.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R007 R010
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Wastes	Includes
TRLS01	Various	1/2" BSP M	6 bar	65 °C	Waterworks	Spout	No	1/4 Turn ceramic disk	Plastic Backnuts	Aerator	Pop Up	Interconnecting Hoses,
TRLS10	Various	1/2" BSP M	6 bar	65 °C	Waterworks	Spout	No	1/4 Turn ceramic disk	Plastic Backnuts	Aerator	Pop Up	Interconnecting Hoses,
ZTLS06	Various	1/2" BSP M	6 bar	65 °C	Waterworks	Spout	No	1/4 Turn ceramic disk	Plastic Backnuts	Aerator	Pop Up	Interconnecting Hoses,
ZTLS07	Various	1/2" BSP M	6 bar	65 °C	Waterworks	Spout	No	1/4 Turn ceramic disk	Plastic Backnuts	Aerator	Pop Up	Interconnecting Hoses,

Notes & Further Information: Finishes available: Brass, Chrome, Nickel, Burnished Brass, Burnished Nickel, Matte Nickel, Copper, Dark Brass, Dark Nickel, Vintage Brass, Gold, Matte Gold.

Approval Holder:: In Compliance GmbH

Company Name
In Compliance GmbH
Address
Kathe-Kollwitz-Ring 5a Unna
Postcode
59423
Country
Germany
General Email
jutta.emge-degenhardt@in-compliance.de

View All Listings by this Company

WRAS Approval Number: #251115307

Section:: 0650 Combination Tap Assemblies
Description:: A Range of Three hole tap(s) with a single outlet and a fixed spout.
Wall Mounted Concealed Undefinable Air Gap – See IRN’s
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
JD-792* **	Various	BSP 1/2" (F)	10 bar	60 °C	Kind	Handle, spout	No	1/4 Turn ceramic disk	Not Applicable	Aerator
JD-742-2* **	Various	BSP 1/2" (F)	10 bar	60 °C	Kind	Spout	No	1/4 Turn ceramic disk	Not Applicable	Aerator
JD-702* **	Various	BSP 1/2" (F)	10 bar	60 °C	Kind	Spout	No	1/4 Turn ceramic disk	Not Applicable	Aerator
JD-704* **	Various	BSP 1/2" (F)	10 bar	60 °C	Kind	Handle	No	1/4 Turn ceramic disk	Not Applicable	Aerator

Notes & Further Information: The first * stands for the different handle A, B,C and D, if there is no handle, no first * ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:: Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

WRAS Approval Number: #251015310

Section:: 0682 Combination Tap Assemblies
Description:: A Range of Spout outlet(s).
Wall mounted Undefinable Air Gap - See IRN's
Installation Requirements:: R001 R040
Expiry date:: 31/10/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
JD-L201**	Various	BSP 1/2" (M)	Open outlet use only bar	60 °C	Kind	Spout	No	Not applicable	Not Applicable	Aerator
JD-200**	Various	BSP 1/2" (M)	Open outlet use only bar	60 °C	Kind	Spout	No	Not applicable	Not Applicable	Aerator
SJS-L202**	Various	BSP 1/2" (M)	Open outlet use only bar	60 °C	Kind	Spout	No	Not applicable	Not Applicable	Aerator

Notes & Further Information: ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:: Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

WRAS Approval Number: #251115301

Section:: 0682 Combination Tap Assemblies
Description:: A Range of Spout outlet(s).
Wall mounted. Undefinable Air Gap please see IRN's
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R040
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
JD-SP501 **	Various	BSP 1/2" (F)	Open outlet only bar	60 °C	Kind	Spout	No	Not applicable		Aerator
SJS-SP205 **	Various	BSP 1/2" (F)	Open outlet only bar	60 °C	Kind	Decorative plate	No	Not applicable		Aerator

Notes & Further Information: ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:: Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

WRAS Approval Number: #251202006

‘Numepress’ range of stainless-steel crimp fittings incorporating EPDM and ‘O’-rings for use with 'Numepress' stainless steel pipe. Connection is achieved via M profile press jaws. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251202006
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15, 18, 22, 28, 35, 42, 54, 76, 88, 108, 114, 139 and 168mm crimp. ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2” BSP (M or F – stated via model name). DN50 to DN150 Flanged.
Marking:: ISOTUBI SL LOGO, Numepress and size on fitting body. ISOTUBI, Numepress, size and product info on pipe.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: F01 Coupling from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F02 Slip Coupling from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F03 90Q Female-Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F04 90Q Male - Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F05 45Q Female-Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F06 45Q Female - Male Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F07 Female Angle Adapter from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F08 Male Angle Adapter from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F09 Female Elbow with Wall nut from 15 1/2" to 22 3/4" Material 1.4401/1.4404 & 1.4301/1.4307 F10 90Q Elbow with Plane Ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F11 Valve connector with swivel in stainless Steel from 15 1/2" to 76.121/2" Material 1.4401/1.4404 & 1.4301/1.4307 F12 Female tee threaded adaptor from 15 1/2" to 108 2" Material 1.4401/1.4404 & 1.4301/1.4307 F14 Reducer from 18-15 to 168.3-139.7 Material 1.4401/1.4404 & 1.4301/1.4307 F15 Reducing tee from 18-15 to 168.3-139.7 Material 1.4401/1.4404 & 1.4301/1.4307 F16 Equal Tee from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F17 Female adaptor from 15 3/ 8" to 88.9 3" Material 1.4401/1.4404 & 1.4301/1.4307 F18 M ale adaptor from 15 3/8" to 108 4" Material 1.4401/1.4404 & 1.4301/1.4307 F19 Flanges adaptor from 15 DN15 to 108 DN100 Material 1.4401/1.4404 & 1.4301/1.4307 F20 Pre-formed pipe bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F21 Plug from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F22 Air tuve Pipe Bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F23 Pipe Bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F24 3 Pieces adaptor from 15 to 60.3 Material 1.4401/1.4404 & 1.4301/1.4307 F25 Female -Female pipe bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F26 Female connector from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F27 Male connector from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F28 Press flanged adaptor from 54 DN50 to 168.3 DN150 Material 1.4401/1.4404 & 1.4301/1.4307 F30 Cross or reduced cross from 15-15-15-15 to 168.3-168.3-168.3-168 .3 Material 1.4401/1.4404 & 1.4301/1.4307 F33 45Q Male angle adaptor from 15 1/ 2" to 28 1" Material 1.4401/1.4404 & 1.4301/1.4307 F34 90Q Female angle adaptor 15 3/ 8" to 35 1 1/ 4" Material 1.4401/1.4404 & 1.4301/1.4307 F35 90Q Female angle adaptor with swivel nut from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F36 Male Tee threaded adaptor from 15 3/8" to 35 11/4" Material 1.4401/1.4404 & 1.4301/1.4307 F37 Male threaded cross from 15 1/2" to 108-4" Material 1.4401/1.4404 & 1.4301/1.4307 F38 Female threaded cross from 15 1/ 2" to 108 4" Material 1.4401/1.4404 & 1.4301/1.4307 F39 90Q Male angle adaptor from 15 3/8" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F41 Male union connector gas from 15 1/ 2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F42 Female Union connector gas from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F43 Grooved Transition from 3/4" to 2" Material 1.4401/1.4404 & 1.4301/1.4307 F44 Van Stone flange from 1/2" to 2" Material 1.4401/1.4404 & 1.4301/1.4307 F45 Union Gas Female threaded from 15 3/4" to 54 2"Material 1.4401/1.4404 & 1.4301/1.4307 F46 Straight union with press fitting on both ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F47 Half coupling from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F48 30Q Female-Female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F49 30Q Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F50 15Q Female-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F51 60Q Female-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F52 Flanges adaptor PN6 from 15 DN15 to 108 DN100 Material 1.4401/1.4404 & 1.4301/1.4307 F53 Pipe penetration from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F54 Male plug from 16 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F55 Weld Adaptor from 15 to 60.3 Material 1.4401/1.4404 & 1.4301/1.4307 F56 75Q Female -Female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F57 l0Q Female-Female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F58 60Q Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F59 lSQ Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F60 Slip coupling with female thread from DN15 1/ 2" to DN54 Material 1.4401/1.4404 & 1.4301/1.4307 F61 Transition for grooved coupling from DN28x33.7 to DN108x 11 4.3 Material 1.4401/1.4404 & 1.4301/1.4307 F63 7SQ Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F64 15Q Male -female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F65 Male-Female pipe penetration from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F66 30Q Male-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F72 45Q Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 Pipe 15 x 0.6 mm Material 1.4401/1.4404 Pipe 18 x 0.7 mm Material 1.4401/1.4404 Pipe 22 x 0.7 mm Material 1.4401/1.4404 Pipe 28 x 0.8 mm Material 1.4401/1.4404 Pipe 35 x 1 mm Material 1.4401/1.4404 Pipe 42 x 1.1 mm Material 1.4401/1.4404 Pipe 54 x 1.2 mm Material 1.4401/1.4404 Pipe 76.1 x 1.5 mm Material 1.4 401/ 1.4404 Pipe 15 x 1 mm Material 1.4401/1.4404 Pipe 18 x 1 mm Material 1.4401/1.4404 Pipe 22 x 1.2 mm Material 1.4401/1.4404 Pipe 28 x 1.2 mm Material 1.4401/1.4404 Pipe 35 x 1.5 mm Material 1.4401/1.4404 Pipe 42 x 1.5 mm Material 1.4401/1.4404 Pipe 54 x 1.5 mm Material 1.4401/1.4404 Pipe 76.1 x 2 mm Material 1.4401/1.4404 Pipe 88.9 x 2 mm Material 1.4401/1.4404 Pipe 114.3 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2.6 mm Material 1.4401/1.4404 Pipe 168.3 x 2 mm Material 1.4401/1.4404 Pipe 168.3 x 2.6 mm Material 1.4401/1.4404 Pipe 15 x 0.6 mm Material 1.4301/1.4307 Pipe 18 x 0.7 mm Material 1.4301/1.4307 Pipe 22 x 0.7 mm Material 1.4301/1.4307 Pipe 28 x 0.8 mm Material 1.4301/1.4307 Pipe 35 x 1 mm Material 1.4301/1.4307 Pipe 42 x 1.1 mm Material 1.4301/1.4307 Pipe 54 x 1 .2 mm, Material 1.4301/1.4307 Pipe 76.1 x 1.5 mm Material 1.4301/1.4307 Pipe 15 x 1 mm Material 1.4301/1.4307 Pipe 18 x 1 mm Material 1.4301/1.4307 Pipe 22 x 1. 2 mm Material 1.4301/1.4307 Pipe 28 x 1.2 mm Material 1.4301/1.4307 Pipe 35 x 1.5 mm Material 1.4301/1.4307 Pipe 42 x 1.5 mm Material 1.4301/1.4307 Pipe 54 x 1.5 mm Material 1.4301/1.4307 Pipe 76.1 x 2 mm Material 1.4301/1.4307 Pipe 88.9 x 2 mm Material 1.4301/1.4307 Pipe 108 x 2 mm Material 1.4301/1.4307 Pipe 114.3 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2.6 mm Material 1.4301/1 .4307 Pipe 168.3 x 2 mm Material 1.4301/1.4307 Pipe 168.3 x 2.6 mm Material 1.4301/1.4307

Product Images

Approval Holder:: ISOTUBI SL

Company Name
ISOTUBI SL
Address
Pol. Ind. Santa Rita c/ Mecànica 6 08755 Castellbisbal ( Bcn ) SPAIN
Country
Spain
General Email
xavi.armengou@isotubi.com

View All Listings by this Company
Manufacturer:: ISOTUBI SL

Company Name
ISOTUBI SL
Address
Pol. Ind. Santa Rita c/ Mecànica 6 08755 Castellbisbal ( Bcn ) SPAIN
Country
Spain
General Email
xavi.armengou@isotubi.com

View All Listings by this Company

WRAS Approval Number: #251012009

Range of copper press fittings with EPDM seals for use with copper pipe (manufactured to EN1057). Jointing is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251012009
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: Hengsheng logo (HS) and size on body.
Installation Requirements:: R001
Expiry date:: 31/10/2030
Model:: 6002 (Press 90° Bend C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6001 (Press 90° Bend FTG×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6041 (Press 45° Bend C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6040 (Press 45° Bend FTG×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6130 (Press Tee C×C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6130R (Press Reducing Tee C×C×C): 15mm×15mm×12mm, 22mm×22mm×15mm, 22mm×22mm×12mm, 22mm×15mm×15mm, 22mm×15mm×22mm, 28mm×28mm×22mm, 28mm×28mm×15mm, 28mm×15mm×22mm, 28mm×22mm×22mm, 28mm×15mm×28mm, 28mm×22mm×28mm, 35mm×35mm×28mm, 35mm×35mm×22mm, 35mm×35mm×15mm, 42mm×42mm×35mm, 42mm×42mm×28mm, 42mm×42mm×22mm, 42mm×42mm×15mm, 54mm×54mm×42mm, 54mm×54mm×35mm, 54mm×54mm×28mm, 54mm×54mm×22mm. 6301 (Press Cap): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6270 (Press Straight Coupling C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. J6270 (Press Slip Coupling C×C): 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6240 (Press Reducing Coupling C×C): 15mm×12mm, 22mm×15mm, 22mm×18mm, 28mm×22mm, 28mm×15mm, 35mm×28mm, 35mm×22mm, 42mm×35mm, 42mm×28mm, 42mm×22mm, 54mm×42mm, 54mm×35mm. 6243 (Press Fitting Reducer Ftg×C): 15mm×12mm, 22mm×15mm, 28mm×22mm, 28mm×15mm, 35mm×28mm, 35mm×22mm, 42mm×35mm, 42mm×28mm, 42mm×22mm, 54mm×42mm, 54mm×35mm, 54mm×28mm, 54mm×22mm.

Approval Holder:: Ningbo Hengsheng Pipe Fitting Co.,Ltd.

Company Name
Ningbo Hengsheng Pipe Fitting Co.,Ltd.
Address
No. 28, West Jinshui Road, Ninghai, Ningbo, Zhejiang
Country
China
Phone
0086-574-65338995
General Email
sales@hengshen.com

View All Listings by this Company

WRAS Approval Number: #240404080

Fastwarm range of M type press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240404080
Size:: see models
Marking:: FASTWARM, size & underfloor heating on fitting.
Installation Requirements:: R001
Expiry date:: 30/04/2029
Model:: STRAIGHT COUPLING CxC: FW-KM101-S1515 15mm FW-KM101-S2222 22mm FW-KM101-S2828 28mm FW-KM101-S3535 35mm FW-KM101-S4242 42mm FW-KM101-S5454 54mm FW-KM101-S6767 66.7mm FW-KM101-S7676 76.1mm FW-KM101-S8989 88.9mm FW-KM101-S108108 108mm SLIP COUPLING C x C: FW-KML102-S1515 15mm FW-KML102-S2222 22mm FW-KML102-S2828 28mm FW-KML102-S3535 35mm FW-KML102-S4242 42mm FW-KML102-S5454 54mm FW-KML102-S6767 66.7mm FW-KML102-S7676 76.1mm FW-KML102-S8989 88.9mm FW-KML102-S108108 108mm REDUCING COUPLING C x C: FW-KM107-S2215 22mm x 15mm FW-KM107-S2815 28mm x 15mm FW-KM107-S2822 28mm x 22mm FW-KM107-S3515 35mm x 15mm FW-KM107-S3522 35mm x 22mm FW-KM107-S3528 35mm x 28mm FW-KM107-S4215 42mm x 15mm FW-KM107-S4222 42mm x 22mm FW-KM107-S4228 42mm x 28mm FW-KM107-S4235 42mm x 35mm FW-KM107-S5422 54mm x 22mm FW-KM107-S5428 54mm x 28mm FW-KM107-S5435 54mm x 35mm FW-KM107-S5442 54mm x 42mm FW-KM107-S6728 66.7mm x 28mm FW-KM107-S6735 66.7mm x 35mm FW-KM107-S6742 66.7mm x 42mm FW-KM107-S6754 66.7mm x 54mm FW-KM107-S7635 76.1mm x 35mm FW-KM107-S7642 76.1mm x 42mm FW-KM107-S7654 76.1mm x 54mm FW-KM107-S7667 76.1mm x 66.7mm FW-KM107-S8942 88.9mm x 42mm FW-KM107-S8954 88.9mm x 54mm FW-KM107-S8967 88.9mm x 66.7mm FW-KM107-S8976 88.9mm x 76.1mm FW-KM107-S10842 108mm x 42mm FW-KM107-S10854 108mm x 54mm FW-KM107-S10867 108mm x 66.7mm FW-KM107-S10876 108mm x 76.1mm FW-KM107-S10889 108mm x 88.9mm FITTING REDUCER F x C: FW-KM108-S2215 22mm x 15mm FW-KM108-S2815 28mm x 15mm FW-KM108-S2822 28mm x 22mm FW-KM108-S3515 35mm x 15mm FW-KM108-S3522 35mm x 22mm FW-KM108-S3528 35mm x 28mm FW-KM108-S4215 42mm x 15mm FW-KM108-S4222 42mm x 22mm FW-KM108-S4228 42mm x 28mm FW-KM108-S4235 42mm x 35mm FW-KM108-S5415 54mm x 15mm FW-KM108-S5422 54mm x 22mm FW-KM108-S5428 54mm x 28mm FW-KM108-S5435 54mm x 35mm FW-KM107-S5415 54mm x 15mm FW-KM108-S5442 54mm x 42mm FW-KM108-S6728 66.7mm x 28mm FW-KM108-S6735 66.7mm x 35mm FW-KM108-S6742 66.7mm x 42mm FW-KM108-S6754 66.7mm x 54mm FW-KM108-S7635 76.1mm x 35mm FW-KM108-S7642 76.1mm x 42mm FW-KM108-S7654 76.1mm x 54mm FW-KM108-S7667 76.1mm x 66.7mm FW-KM108-S8942 88.9mm x 42mm FW-KM108-S8954 88.9mm x 54mm FW-KM108-S8967 88.9mm x 66.7mm FW-KM108-S8976 88.9mm x 76.1mm FW-KM108-S10842 108mm x 42mm FW-KM108-S10854 108mm x 54mm FW-KM108-S10867 108mm x 66.7mm FW-KM108-S10876 108mm x 76.1mm FW-KM108-S10889 108mm x 88.9mm 90DEG ELBOW C x C: FW-KM103-L1515 15mm FW-KM103-L2222 22mm FW-KM103-L2828 28mm FW-KM103-L3535 35mm FW-KM103-L4242 42mm FW-KM103-L5454 54mm FW-KM103-L6767 66.7mm FW-KM103-L7676 76.1mm FW-KM103-L8989 88.9mm FW-KM103-L108108 108mm 90DEG STREET ELBOW F x C: FW-KM104-L1515 15mm FW-KM104-L2222 22mm FW-KM104-L2828 28mm FW-KM104-L3535 35mm FW-KM104-L4242 42mm FW-KM104-L5454 54mm FW-KM104-L6767 66.7mm FW-KM104-L7676 76.1mm FW-KM104-L8989 88.9mm FW-KM104-L108108 108mm 45DEG ELBOW C x C: FW-KM105-L1515 15mm FW-KM105-L2222 22mm FW-KM105-L2828 28mm FW-KM105-L3535 35mm FW-KM105-L4242 42mm FW-KM105-L5454 54mm FW-KM105-L6767 66.7mm FW-KM105-L7676 76.1mm FW-KM105-L8989 88.9mm FW-KM105-L108108 108mm 45DEG STREET ELBOW F x C: FW-KM106-L1515 15mm FW-KM106-L2222 22mm FW-KM106-L2828 28mm FW-KM106-L3535 35mm FW-KM106-L4242 42mm FW-KM106-L5454 54mm FW-KM106-L6767 66.7mm FW-KM106-L7676 76.1mm FW-KM106-L8989 88.9mm FW-KM106-L108108 108mm CAP C x C: FW-KM111-D1515 15mm FW-KM111-D2222 22mm FW-KM111-D2828 28mm FW-KM111-D3535 35mm FW-KM111-D4242 42mm FW-KM111-D5454 54mm FW-KM111-D6767 66.7mm FW-KM111-D7676 76.1mm FW-KM111-D8989 88.9mm FW-KM111-D108108 108mm EQUAL TEE C x C: FW-KM109-T151515 15mm FW-KM109-T222222 22mm FW-KM109-T282828 28mm FW-KM109-T353535 35mm FW-KM109-T424242 42mm FW-KM109-T545454 54mm FW-KM109-T676767 66.7mm FW-KM109-T767676 76.1mm FW-KM109-T898989 88.9mm FW-KM109-T108108108 108mm PART CROSSOVER F x C: FW-KM113-L1515 15mm FW-KM113-L2222 22mm CROSSOVER C x C: FW-KM112-S1515 15mm FW-KM112-S2222 22mm REDUCER ELBOW FW-KM103-L2215 22mm x 15mm FW-KM103-L2815 28mm x 15mm FW-KM103-L2822 28mm x 22mm REDUCING TEE: FW-KM110-T221515 22mm x 15mm x 15mm FW-KM110-T222215 22mm x 22mm x 15mm FW-KM110-T282222 28mm x 22mm x 22mm FW-KM110-T282822 28mm x 28mm x 22mm FW-KM110-T281522 28mm x 15mm x 22mm FW-KM110-T282815 28mm x 28mm x 15mm FW-KM110-T352222 35mm x 22mm x 22mm FW-KM110-T353522 35mm x 35mm x 22mm FW-KM110-T353528 35mm x 35mm x 28mm FW-KM110-T423535 42mm x 35mm x 35mm FW-KM110-T152215 15mm x 22mm x 15mm FW-KM110-T222822 22mm x 28mm x 22mm FW-KM110-T221522 22mm x 15mm x 22mm FW-KM110-T281528 28mm x 15mm x 28mm FW-KM110-T282228 28mm x 22mm x 28mm FW-KM110-T351535 35mm x 15mm x 35mm FW-KM110-T352235 35mm x 22mm x 35mm FW-KM110-T352835 35mm x 28mm x 35mm FW-KM110-T421542 42mm x 15mm x 42mm FW-KM110-T422242 42mm x 22mm x 42mm FW-KM110-T422842 42mm x 28mm x 42mm FW-KM110-T423542 42mm x 35mm x 42mm FW-KM110-T541554 54mm x 15mm x 54mm FW-KM110-T542254 54mm x 22mm x 54mm FW-KM110-T542854 54mm x 28mm x 54mm FW-KM110-T543554 54mm x 35mm x 54mm FW-KM110-T544254 54mm x 42mm x 54mm FW-KM110-T672867 66.7mm x 28mm x 66.7mm FW-KM110-T673567 66.7mm x 35mm x 66.7mm FW-KM110-T674267 66.7mm x 42mm x 66.7mm FW-KM110-T675467 66.7mm x 54mm x 66.7mm FW-KM110-T762276 76.1mm x 22mm x 76.1mm FW-KM110-T762876 76.1mm x 28mm x 76.1mm FW-KM110-T763576 76.1mm x 35mm x 76.1mm FW-KM110-T764276 76.1mm x 42mm x 76.1mm FW-KM110-T765476 76.1mm x 54mm x 76.1mm FW-KM110-T766776 76.1mm x 66.7mm x 76.1mm FW-KM110-T894289 88.9mm x 42mm x 88.9mm FW-KM110-T895489 88.9mm x 54mm x 88.9mm FW-KM110-T896789 88.9mm x 66.7mm x 88.9mm FW-KM110-T897689 88.9mm x 76.1mm x 88.9mm FW-KM110-T10854108 108mm x 54mm x 108mm FW-KM110-T10867108 108mm x 66.7mm x 108mm FW-KM110-T10876108 108mm x 76.1mm x 108mm FW-KM110-T10889108 108mm x 88.9mm x 108mm

Approval Holder:: Fastwarm Limited

Company Name
Fastwarm Limited
Address
Unit 13 Carnival Park Basildon Essex
Postcode
SS14 3WN
Phone
01228 744 479
General Email
support@fastwarm.com

View All Listings by this Company

WRAS Approval Number: #240404081

Range RP of M type press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240404081
Size:: see models
Marking:: RP, size & WRAS on body. (Note: For 66.7mm models it will be marked as 67mm, for 76.1mm models it will be marked as 76mm, for 88.9mm it will be marked as 89mm)
Installation Requirements:: R001
Expiry date:: 30/04/2029
Model:: STRAIGHT COUPLING CxC: CCP015 - 15mm CCP022 - 22mm CCP028 - 28mm CCP035 - 35mm CCP042 - 42mm CCP054 - 54mm CCP067 - 66.7mm CCP076 - 76.1mm CCP089 - 88.9mm CCP108 - 108mm SLIP COUPLING C x C: SCCP015 - 15mm SCCP022 - 22mm SCCP028 - 28mm SCCP035 - 35mm SCCP042 - 42mm SCCP054 - 54mm SCCP067 - 66.7mm SCCP076 - 76.1mm SCCP089 - 88.9mm SCCP108 - 108mm FITTING REDUCER F x C: FRCP022015 - 22mm x 15mm FRCP028015 - 28mm x 15mm FRCP028022 - 28mm x 22mm FRCP035015 - 35mm x 15mm FRCP035022 - 35mm x 22mm FRCP035028 - 35mm x 28mm FRCP042015 - 42mm x 15mm FRCP042022 - 42mm x 22mm FRCP042028 - 42mm x 28mm FRCP042035 - 42mm x 35mm FRCP054015 - 54mm x 15mm FRCP054022 - 54mm x 22mm FRCP054028 - 54mm x 28mm FRCP054035 - 54mm x 35mm FRCP054042 - 54mm x 42mm FRCP067028 - 66.7mm x 28mm FRCP067035 - 66.7mm x 35mm FRCP067042 - 66.7mm x 42mm FRCP067054 - 66.7mm x 54mm FRCP076035 - 76.1mm x 35mm FRCP076042 - 76.1mm x 42mm FRCP076054 - 76.1mm x 54mm FRCP076067 - 76.1mm x 66.7mm FRCP089042 - 88.9mm x 42mm FRCP089054 - 88.9mm x 54mm FRCP089067 - 88.9mm x 66.7mm FRCP089076 - 88.9mm x 76.1mm FRCP0108042 - 108mm x 42mm FRCP0108054 - 108mm x 54mm FRCP0108067 - 108mm x 66.7mm FRCP0108076 - 108mm x 76.1mm FRCP0108089 - 108mm x 88.9mm 90DEG ELBOW C x C: ECP015 - 15mm ECP022 - 22mm ECP028 - 28mm ECP035 - 35mm ECP042 - 42mm ECP054 - 54mm ECP067 - 66.7mm ECP076 - 76.1mm ECP089 - 88.9mm ECP108 - 108mm 90DEG STREET ELBOW F x C: SECP015 15mm SECP022 22mm SECP028 28mm SECP035 35mm SECP042 42mm SECP054 54mm SECP067 66.7mm SECP076 76.1mm SECP089 88.9mm SECP108 108mm 45DEG ELBOW C x C: OECP015 - 15mm OECP022 - 22mm OECP028 - 28mm OECP035 - 35mm OECP042 - 42mm OECP054 - 54mm OECP067 - 66.7mm OECP076 - 76.1mm OECP089 - 88.9mm OECP108 - 108mm 45DEG STREET ELBOW F x C: OSECP015 - 15mm OSECP022 - 22mm OSECP028 - 28mm OSECP035 - 35mm OSECP042 - 42mm OSECP054 - 54mm OSECP067 - 66.7mm OSECP076 - 76.1mm OSECP089 - 88.9mm OSECP108 - 108mm CAP C x C: SECCP015 - 15mm SECCP022 - 22mm SECCP028 - 28mm SECCP035 - 35mm SECCP042 - 42mm SECCP054 - 54mm SECCP067 - 66.7mm SECCP076 - 76.1mm SECCP089 - 88.9mm SECCP0108 - 108mm EQUAL TEE C x C: ETCP015 - 15mm ETCP022 - 22mm ETCP028 - 28mm ETCP035 - 35mm ETCP042 - 42mm ETCP054 - 54mm ETCP067 - 66.7mm ETCP076 - 76.1mm ETCP089 - 88.9mm ETCP108 - 108mm PART CROSSOVER F x C: PCCP015 - 15mm PCCP022 - 22mm CROSSOVER C x C: FCCP015 - 15mm FCCP022 - 22mm REDUCING TEE: RTCP022015015 - 22mm x 15mm x 15mm RTCP022022015 - 22mm x 22mm x 15mm RTCP028022022 - 28mm x 22mm x 22mm RTCP028015022 - 28mm x 15mm x 22mm RTCP028028015 - 28mm x 28mm x 15mm RTCP035022022 - 35mm x 22mm x 22mm RTCP035035022 - 35mm x 35mm x 22mm RTCP035035028 - 35mm x 35mm x 28mm RTCP042035035 - 42mm x 35mm x 35mm RTCP015022015 - 15mm x 22mm x 15mm RTCP022028022 - 22mm x 28mm x 22mm RTCP022015022 - 22mm x 15mm x 22mm RTCP028015028 - 28mm x 15mm x 28mm RTCP028022028 - 28mm x 22mm x 28mm RTCP035015035 - 35mm x 15mm x 35mm RTCP035022035 - 35mm x 22mm x 35mm RTCP035028035 - 35mm x 28mm x 35mm RTCP042015042 - 42mm x 15mm x 42mm RTCP042022042 - 42mm x 22mm x 42mm RTCP042028042 - 42mm x 28mm x 42mm RTCP042035042 - 42mm x 35mm x 42mm RTCP054015054 - 54mm x 15mm x 54mm RTCP054022054 - 54mm x 22mm x 54mm RTCP054028054 - 54mm x 28mm x 54mm RTCP054035054 - 54mm x 35mm x 54mm RTCP054042054 - 54mm x 42mm x 54mm RTCP067028067 - 66.7mm x 28mm x 66.7mm RTCP067035067 - 66.7mm x 35mm x 66.7mm RTCP067042067 - 66.7mm x 42mm x 66.7mm RTCP067054067 - 66.7mm x 54mm x 66.7mm RTCP076022076 - 76.1mm x 22mm x 76.1mm RTCP076028076 - 76.1mm x 28mm x 76.1mm RTCP076035076 - 76.1mm x 35mm x 76.1mm RTCP076042076 - 76.1mm x 42mm x 76.1mm RTCP076054076 - 76.1mm x 54mm x 76.1mm RTCP076067076 - 76.1mm x 66.7mm x 76.1mm RTCP089042089 - 88.9mm x 42mm x 88.9mm RTCP089054089 - 88.9mm x 54mm x 88.9mm RTCP089067089 - 88.9mm x 66.7mm x 88.9mm RTCP089076089 - 88.9mm x 76.1mm x 88.9mm RTCP108108054 - 108mm x 54mm x 108mm RTCP108108067 - 108mm x 66.7mm x 108mm RTCP108108076 - 108mm x 76.1mm x 108mm RTCP108108089 - 108mm x 88.9mm x 108mm

Product Images

Approval Holder:: Rapid Press Fittings Ltd

Company Name
Rapid Press Fittings Ltd
Address
2 Penrod Way Heysham Lancashire
Postcode
LA3 2UZ
Phone
(01524) 965100
General Email
jacobrelph@phd.ltd

View All Listings by this Company

WRAS Approval Number: #240704745

‘Fastwarm’ range of U profile press fittings (nickel plated brass bodies) for use with ‘Fastwarm’ range of PERT/AL/PERT multi-layered pipes. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
Section Subtitle:: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
WRAS Approval Number:: 240704745
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 16mm – 32mm
Marking:: Fastwarm on body Fastwarm, size, WRAS and product info on pipe.
Installation Requirements:: R001
Expiry date:: 31/07/2029
Model:: Equal Straight Union FW-KY101-S1616 S16X16 FW-KY101-S2020 S20X20 FW-KY101-S2525 S25X25 FW-KY101-S3232 S32X32 Unequal Straight Union FW-KY102-S2016 S20X16 FW-KY102-S2516 S25X16 FW-KY102-S2520 S25X20 FW-KY102-S3216 S32X16 FW-KY102-S3220 S32X20 FW-KY102-S3225 S32X25 Male Straight Union FW-KY103-S1612M S 16X1/2M FW-KY103-S1634M S 16X3/4M FW-KY103-S2012M S 20X1/2M FW-KY103-S2034M S 20X3/4M FW-KY103-S2512M S 25X1/2M FW-KY103-S2534M S 25X3/4M FW-KY103-S2511M S25X1M FW-KY103-S3234M S 32X3/4M FW-KY103-S3211M S 32X1M Female Straight Union FW-KY104-S1612F S 16X1/2 F FW-KY104-S1634F S 16X3/4 F FW-KY104-S2012F S 20X1/2 F FW-KY104-S2034F S 20X3/4 F FW-KY104-S2534F S 25X3/4 F FW-KY104-S2511F S 25X1 F FW-KY104-S3234F S 32X3/4 F FW-KY104-S3211F S 32X1 F Swivel Coupling FW-KY105-1612F 16X1/2F FW-KY105-2034F 20X3/4F FW-KY105-2012F 20X1/2F FW-KY105-2534F 25X3/4F Equal Elbow FW-KY106-L1616 L 16X16 FW-KY106-L2020 L 20X20 FW-KY106-L2525 L 25X25 FW-KY106-L3232 L 32X32 Female Elbow FW-KY107-L1612F L 16X1/2 F FW-KY107-L1634F L 16X3/4 F FW-KY107-L2012F L 20X1/2 F FW-KY107-L2034F L 20X3/4 F FW-KY107-L2534F L 25X3/4 F FW-KY107-L2511F L 25X1 F FW-KY107-L3211F L 32X1 F Male Elbow FW-KY108-L1612M L16x1/2M FW-KY108-L2012M L20x1/2M FW-KY108-L2034M L20X3/4M FW-KY108-L2534M L25x3/4M FW-KY108-L3211M L32x1M Swivel Elbow FW-KY109-1612F 16X1/2F FW-KY109-2034F 20X3/4F Equal Tee FW-KY110-T161616 T 16X16X16 FW-KY110-T202020 T 20X20X20 FW-KY110-T252525 T 25X25X25 FW-KY110-T323232 T 32X32X32 Unequal Tee FW-KY111-T162016 T 16X20X16 FW-KY111-T201616 T 20X16X16 FW-KY111-T201620 T20X16X20 FW-KY111-T202016 T20X20X16 FW-KY111-T251625 T 25X16X25 FW-KY111-T252516 T 25X25X16 FW-KY111-T251616 T25X16X16 FW-KY111-T252020 T 25X20X20 FW-KY111-T252025 T 25X20X25 FW-KY111-T321632 T32X16X32 FW-KY111-T322032 T32X20X32 FW-KY111-T322525 T32X25X25 FW-KY111-T322532 T32X25X32 Female Tee FW112-T2512F25 T25X1/2FX25 Elbow With Plate-Male FW-KY114-1612M 16X1/2M FW-KY114-1634M 16X3/4 M FW-KY114-2034M 20X3/4 M Elbow with Plate-Female FW-KY115-1612F 16X1/2 F FW-KY115-1634F 16X3/4F FW-KY115-2012F 20X1/2F FW-KY115-2034F 20X3/4F End cap FW-KY116-16 16 FW-KY116-20 20 FW-KY116-25 25 ‘ZL' range of PERT/AL/PERT multi-layer pipes. PERTPIPE50M 16*2.0 PERTPIPE60M 16*2.0 PERTPIPE70M 16*2.0 PERTPIPE 80M 16*2.0 PERTPIPE90M 16*2.0 PERTPIPE100M 16*2.0 PERTPIPE110M 16*2.0 PERTPIPE120M 16*2.0 PERTPIPE150M 16*2.0 PERTPIPE200M 16*2.0

Approval Holder:: Fastwarm Limited

Company Name
Fastwarm Limited
Address
Unit 13 Carnival Park Basildon Essex
Postcode
SS14 3WN
Phone
01228 744 479
General Email
support@fastwarm.com

View All Listings by this Company

WRAS Approval Number: #251012017

Range of copper capillary, lead free solder ring and threaded fittings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:: 1115 Fittings for use with Tube and Pipe
Section Subtitle:: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251012017
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: Hengsheng logo (HS) and size on body.
Installation Requirements:: R001
Expiry date:: 31/10/2030
Model:: SR5090 (90° Elbow Close Ruff C×C): 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. SR5092 (90° Street Elbow Close Ruff Ftg×C): 15mm, 22mm, 28mm. 54mm SR5090R (Reducing 90° Elbow C×C): 22mm×15mm, 28mm×22mm, 28mm×15mm. SR5041 (45° Elbow C×C): 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. SR5040 (45° Elbow FTG×C): 15mm, 22mm, 28mm. SR5130 (Equal Tee C×C×C): 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. SR5130R (Reducing TEE C×C×C): 15mm×15mm×22mm, 15mm×15mm×12mm, 15mm×15mm×10mm, 22mm×22mm×28mm, 22mm×22mm×15mm, 22mm×22mm×12mm, 28mm×28mm×22mm, 28mm×28mm×15mm, 35mm×35mm×28mm, 35mm×35mm×22mm, 35mm×35mm×15mm, 42mm×42mm×35mm, 42mm×42mm×28mm, 42mm×42mm×22mm, 42mm×42mm×15mm, 54mm×54mm×42mm, 54mm×54mm×35mm, 54mm×54mm×28mm, 54mm×54mm×22mm, 54mm×54mm×15mm, 22mm×15mm×22mm, 22mm×15mm×15mm, 28mm×22mm×28mm, 28mm×22mm×22mm, 28mm×22mm×15mm, 28mm×15mm×28mm, 28mm×15mm×22mm, 28mm×15mm×15mm, 35mm×28mm×28mm. SR5270 (Equal Coupling C×C): 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. SR5240 (Reducing Coupling C×C): 10mm×8mm, 12mm×10mm, 12mm×8mm, 15mm×12mm, 15mm×10mm, 15mm×8mm, 22mm×15mm, 22mm×12mm, 22mm×10mm, 28mm×22mm, 28mm×15mm, 28mm×12mm, 35mm×28mm, 35mm×22mm, 35mm×15mm, 42mm×35mm, 42mm×28mm, 42mm×22mm, 42mm×15mm, 54mm×42mm, 54mm×35mm, 54mm×28mm, 54mm×22mm, 54mm×15mm. SR5243 (Fitting Reducer Ftg×C): 10mm×8mm, 12mm×10mm, 12mm×8mm, 15mm×12mm, 15mm×10mm, 15mm×8mm, 22mm×15mm, 22mm×12mm, 22mm×10mm, 28mm×22mm, 28mm×15mm, 28mm×12mm, 35mm×28mm, 35mm×22mm, 35mm×15mm, 42mm×35mm, 42mm×28mm, 42mm×22mm, 42mm×15mm, 54mm×42mm, 54mm×35mm, 54mm×28mm, 54mm×22mm, 54mm×15mm. SR5301 (Tube Cap): 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. SR5085 (Cross Over Coupling C×C): 15mm, 22mm. SR5086 (Partial Cross Over Ftg×C): 15mm, 22mm. SR5062 (Straight Tap Connector C×FI): 15mm×1/2", 15mm×3/4", 22mm×3/4", 22mm×1", 28mm×1". SR5063 (Bent Tap Connector C×FI): 15mm×1/2", 15mm×3/4", 22mm×3/4", 22mm×1", 28mm×1".

Approval Holder:: Ningbo Hengsheng Pipe Fitting Co.,Ltd.

Company Name
Ningbo Hengsheng Pipe Fitting Co.,Ltd.
Address
No. 28, West Jinshui Road, Ninghai, Ningbo, Zhejiang
Country
China
Phone
0086-574-65338995
General Email
sales@hengshen.com

View All Listings by this Company

WRAS Approval Number: #2207410

RWC range of polypropolene fittings for use with PE pipe (manufactured to EN 12201). Maximum working pressure 16 bar. Cold water use.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2207410
Note:: For above and below ground use
Size:: 20mm – 63mm.
Marking:: JG logo, John Guest, size & PN on compression nut.
Installation Requirements:: R001
Expiry date:: 31/07/2027
Model:: Reducing Tee (Branch Reduced) RWC UGCF30A252520: JG MDPE Compression Red Tee - 25 x 25 x 20mm UGCF30A323225: JG MDPE Compression Red Tee - 32 x 32 x 25mm UGCF30A404032: JG MDPE Compression Red Tee - 40 x 40 x 32mm UGCF30A505025: JG MDPE Compression Red Tee - 50 x 50 x 25mm UGCF30A505032: JG MDPE Compression Red Tee - 50 x 50 x 32mm UGCF30A505040: JG MDPE Compression Red Tee - 50 x 50 x 40mm UGCF30A636332: JG MDPE Compression Red Tee - 63 x 63 x 32mm UGCF30A636340: JG MDPE Compression Red Tee - 63 x 63 x 40mm UGCF30A636350: JG MDPE Compression Red Tee - 63 x 63 x 50mm Male Thread Adaptor RWC UGCF45M2012BSP: JG MDPE Compression Male Adpt - 20mm x 1/2" UGCF45M2034BSP: JG MDPE Compression Male Adpt - 20mm x 3/4" UGCF45M2512BSP: JG MDPE Compression Male Adpt - 25mm x 1/2" UGCF45M2534BSP: JG MDPE Compression Male Adpt - 25mm x 3/4" UGCF45M251BSP: JG MDPE Compression Male Adpt - 25mm x 1" UGCF45M3234BSP: JG MDPE Compression Male Adpt - 32mm x 3/4" UGCF45M321BSP: JG MDPE Compression Male Adpt - 32mm x 1" UGCF45M32114BSP: JG MDPE Compression Male Adpt - 32mm x 1-1/4" UGCF45M32112BSP: JG MDPE Compression Male Adpt - 32mm x 1-1/2" UGCF45M401BSP: JG MDPE Compression Male Adpt - 40mm x 1" UGCF45M40114BSP: JG MDPE Compression Male Adpt - 40mm x 1-1/4" UGCF45M40112BSP: JG MDPE Compression Male Adpt - 40mm x 1-1/2" UGCF45M50112BSP: JG MDPE Compression Male Adpt - 50mm x 1-1/2" UGCF45M502BSP: JG MDPE Compression Male Adpt - 50mm x 2" UGCF45M63112BSP: JG MDPE Compression Male Adpt - 63mm x 1-1/2" UGCF45M632BSP: JG MDPE Compression Male Adpt - 63mm x 2" Female Threaded Branch Tee RWC UGCF58F202012BSP: JG MDPE Compression Fem Tee - 20 x 20 x 1/2" UGCF58F202034BSP: JG MDPE Compression Fem Tee - 20 x 20 x 3/4" UGCF58F252512BSP: JG MDPE Compression Fem Tee - 25 x 25 x 1/2" UGCF58F252534BSP: JG MDPE Compression Fem Tee - 25 x 25 x 3/4" UGCF58F323234BSP: JG MDPE Compression Fem Tee - 32 x 32 x 3/4" UGCF58F32321BSP: JG MDPE Compression Fem Tee - 32 x 32 x 1" UGCF58F4040114BSP: JG MDPE Compression Fem Tee - 40 x 40 x 1-1/4" UGCF58F4040112BSP: JG MDPE Compression Fem Tee - 40 x 40 x 1-1/2" UGCF58F5050112BSP: JG MDPE Compression Fem Tee - 50 x 50 x 1-1/2" UGCF58F50502BSP: JG MDPE Compression Fem Tee - 50 x 50 x 2" UGCF58F63632BSP: JG MDPE Compression Fem Tee - 63 x 63 x 2" Female Thread Adaptor RWC UGCF45F2012BSP: JG MDPE Compression Female Adpt - 20mm x 1/2" UGCF45F2034BSP: JG MDPE Compression Female Adpt - 20mm x 3/4" UGCF45F2512BSP: JG MDPE Compression Female Adpt - 25mm x 1/2" UGCF45F2534BSP: JG MDPE Compression Female Adpt - 25mm x 3/4" UGCF45F251BSP: JG MDPE Compression Female Adpt - 25mm x 1" UGCF45F3234BSP: JG MDPE Compression Female Adpt - 32mm x 3/4" UGCF45F321BSP: JG MDPE Compression Female Adpt - 32mm x 1" UGCF45F32114BSP: JG MDPE Compression Female Adpt - 32mm x 1-1/4" UGCF45F32112BSP: JG MDPE Compression Female Adpt - 32mm x 1-1/2" UGCF45F401BSP: JG MDPE Compression Female Adpt - 40mm x 1" UGCF45F40114BSP: JG MDPE Compression Female Adpt - 40mm x 1-1/4" UGCF45F40112BSP: JG MDPE Compression Female Adpt - 40mm x 1-1/2" UGCF45F50112BSP: JG MDPE Compression Female Adpt - 50mm x 1-1/2" UGCF45F502BSP: JG MDPE Compression Female Adpt - 50mm x 2" UGCF45F63112BSP: JG MDPE Compression Female Adpt - 63mm x 1-1/2" UGCF45F632BSP: JG MDPE Compression Female Adpt - 63mm x 2" Stop End RWC UGCF4620: JG MDPE Compression Stop End - 20mm UGCF4625: JG MDPE Compression Stop End - 25mm UGCF4632: JG MDPE Compression Stop End - 32mm UGCF4640: JG MDPE Compression Stop End - 40mm UGCF4650: JG MDPE Compression Stop End - 50mm UGCF4663: JG MDPE Compression Stop End - 63mm Straight Coupling RWC UGCF0420: JG MDPE Compression Straight Coupling - 20mm UGCF0425: JG MDPE Compression Straight Coupling - 25mm UGCF0432: JG MDPE Compression Straight Coupling - 32mm UGCF0440: JG MDPE Compression Straight Coupling - 40mm UGCF0450: JG MDPE Compression Straight Coupling - 50mm UGCF0463: JG MDPE Compression Straight Coupling - 63mm Reducing Coupling RWC UGCF202520: JG MDPE Compression Red Coupling - 25 x 20mm UGCF203220: JG MDPE Compression Red Coupling - 32 x 20mm UGCF203225: JG MDPE Compression Red Coupling - 32 x 25mm UGCF204025: JG MDPE Compression Red Coupling - 40 x 25mm UGCF204032: JG MDPE Compression Red Coupling - 40 x 32mm UGCF205025: JG MDPE Compression Red Coupling - 50 x 25mm UGCF205032: JG MDPE Compression Red Coupling - 50 x 32mm UGCF205040: JG MDPE Compression Red Coupling - 50 x 40mm UGCF206332: JG MDPE Compression Red Coupling - 63 x 32mm UGCF206340: JG MDPE Compression Red Coupling - 63 x 40mm UGCF206350: JG MDPE Compression Red Coupling - 63 x 50mm Elbow - 90 Degree RWC UGCF0320: JG MDPE Compression Elbow - 90D - 20mm UGCF0325: JG MDPE Compression Elbow - 90D - 25mm UGCF0332: JG MDPE Compression Elbow - 90D - 32mm UGCF0340: JG MDPE Compression Elbow - 90D - 40mm UGCF0350: JG MDPE Compression Elbow - 90D - 50mm UGCF0363: JG MDPE Compression Elbow - 90D - 63mm Male Threaded Elbow RWC UGCF75M2534BSP: JG MDPE Compression Male Elbow - 25mm x 3/4" UGCF75M321BSP: JG MDPE Compression Male Elbow - 32mm x 1" Female Threaded Elbow RWC UGCF75F2012BSP: JG MDPE Compression Fem Elbow - 20mm x 1/2" UGCF75F2034BSP: JG MDPE Compression Fem Elbow - 20mm x 3/4" UGCF75F2512BSP: JG MDPE Compression Fem Elbow - 25mm x 1/2" UGCF75F2534BSP: JG MDPE Compression Fem Elbow - 25mm x 3/4" UGCF75F251BSP: JG MDPE Compression Fem Elbow - 25mm x 1" UGCF75F321BSP: JG MDPE Compression Fem Elbow - 32mm x 1" UGCF75F40114BSP: JG MDPE Compression Fem Elbow - 40mm x 1-1/4" UGCF75F40112BSP: JG MDPE Compression Fem Elbow - 40mm x 1-1/2" UGCF75F50112BSP: JG MDPE Compression Fem Elbow - 50mm x 1-1/2" UGCF75F632BSP: JG MDPE Compression Fem Elbow - 63mm x 2" Wall Plate Elbow (PP) RWC UGCF88WB2012BSP: JG MDPE Compression Wall Elbow - 20mm x 1/2" UGCF88WB2534BSP: JG MDPE Compression Wall Elbow - 25mm x 3/4" Equal Tee RWC UGCF0220: JG MDPE Compression Equal Tee - 20mm UGCF0225: JG MDPE Compression Equal Tee - 25mm UGCF0232: JG MDPE Compression Equal Tee - 32mm UGCF0240: JG MDPE Compression Equal Tee - 40mm UGCF0250: JG MDPE Compression Equal Tee - 50mm UGCF0263: JG MDPE Compression Equal Tee - 63mm Repair Coupling RWC UGCF04R25: JG MDPE Compression Repair Coupling - 25mm UGCF04R32: JG MDPE Compression Repair Coupling - 32mm UGCF04R40: JG MDPE Compression Repair Coupling - 40mm UGCF04R50: JG MDPE Compression Repair Coupling - 50mm UGCF04R63: JG MDPE Compression Repair Coupling - 63mm Conversion Adaptor - MPDE to Copper (Pushfit) RWC UGCF01PF2522: JG MDPE Compression Conversion Adpt - 25 x 22mm UGCF01PF3222: JG MDPE Compression Conversion Adpt - 32 x 22mm UGCF01PF3228: JG MDPE Compression Conversion Adpt - 32 x 28mm Models added September 2025 UGCF75F321BSP ELBOW THREADED FEMALE 32 X 1" UGCF30A505032 TEE REDUCING 50X32X50 Models added January 2026 UGCF01IMP2012BSP - Coupling 1/2"x20 UGCF01IMP2512BSP - Coupling 1/2"x25 UGCF01IMP2534BSP - Coupling 3/4"x25 UGCF0316: ELBOW - 90 DEGREE 16X16 UGCF0216: EQUAL TEE 16X16X16 UGCF30A202016: TEE REDUCING 20X16X20 UGCF4616: END PLUG 16MM UGCF0416: COUPLING 16X16 UGCF202016: REDUCING COUPLING 20X16 UGCF202516: REDUCING COUPLING 25X16 UGCF01PF2015: UNIVERSAL FITTING - CONVERSION REDUCER 20X15 UGCF01PF2515: UNIVERSAL FITTING - CONVERSION REDUCER 25X15 UGCF45M1612BSP: ADAPTOR MALE 16X UGCF45M1634BSP: ADAPTOR MALE 16X UGCF45F1612BSP: ADAPTOR FEMALE 16X 1/2’’ UGCF45F1634BSP: ADAPTOR FEMALE 16X 3/4’’

Approval Holder:: Reliance Worldwide Corporation (UK)

Company Name
Reliance Worldwide Corporation (UK)
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

WRAS Approval Number: #251115002

Range of brass press fittings with EPDM ‘O’-rings for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved via a crimping tool using either a ‘U’, ‘TH’ or ‘H’ profile. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251115002
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Equal Straight Union: 16mm - 32mm, Unequal Straight Union: 20mmx16mm - 32mmx26mm, Male Straight Union: 16mmx⅜” BSP (M) - 32mmx1” BSP (M), Female Straight Union: 16mmx⅜” BSP (F) - 32mmx1” BSP (F), Equal Elbows: 16mm - 32mm, Male Elbows: 16mmx⅜” BSP (M) - 32mmx1” BSP (M), Female Elbows: 16mmx⅜ BSP (F) - 32mmx1” BSP (F), Equal Tees: 16mm - 32mm, Unequal Tees: 16mmx20mmx16mm - 32mmx26mmx32mm, Female Tee: 16mmx16mmx⅜” BSP (F) - 32mmx32mmx1” BSP (F), Wall-plated female elbow: 16mmx⅜” BSP (F) - 26mmx¾” BSP (F),
Marking:: Brymec & arrow logo, size, crimp profile (U-TH-H) and production date (MM/YYYY) on crimp sleeve.
Installation Requirements:: R001
Expiry date:: 30/11/2030
Model:: Equal Straight Union (16mm - 32mm): 51019 ∙ 16mm Brass Coupler Multilayer Crimp Fitting 51020 ∙ 20mm Brass Coupler Multilayer Crimp Fitting 51018 ∙ 25mm Brass Coupler Multilayer Crimp Fitting 51022 ∙ 32mm Brass Coupler Multilayer Crimp Fitting Unequal Straight Union (20mmx16mm - 32mmx26mm): 51028 ∙ 20x16mm Reducing Coupler Multilayer Crimp Fitting 51040 ∙ 25x16mm Reducing Coupler Multilayer Crimp Fitting 51038 ∙ 25x20mm Reducing Coupler Multilayer Crimp Fitting 51031 ∙ 32x16mm Reducing Coupler Multilayer Crimp Fitting 51032 ∙ 32x20mm Reducing Coupler Multilayer Crimp Fitting 51039 ∙ 32x25mm Reducing Coupler Multilayer Crimp Fitting Male Straight Union (16mmx⅜” BSP (M) - 32mmx1” BSP (M)): 51081 ∙ 16mm x 1/2" Male Iron Multilayer Crimp Coupler 51083 ∙ 20mm x 1/2" Male Iron Multilayer Crimp Coupler 51084 ∙ 20mm x 3/4" Male Iron Multilayer Crimp Coupler 51082 ∙ 25mm x 3/4" Male Iron Multilayer Crimp Fitting 51085 ∙ 25mm x 1" Male Iron Multilayer Crimp Fitting 51088 ∙ 32mm x 1" Male Iron Multilayer Crimp Coupler Female Straight Union (16mmx⅜” BSP (F) - 32mmx1” BSP (F)): 51067 ∙ 16mm x 1/2" Female Iron Multilayer Crimp Coupler 51069 ∙ 20mm x 1/2" Female Iron Multilayer Crimp Coupler 51070 ∙ 20mm x 3/4" Female Iron Multilayer Crimp Coupler 51095 ∙ 25mm x 3/4" Female Iron Multilayer Crimp Fitting 51068 ∙ 25mm x 1" Female Iron Multilayer Crimp Fitting 51073 ∙ 32mm x 1" Female Iron Multilayer Crimp Coupler Equal Elbows (16mm - 32mm): 51044 ∙ 16mm Brass 90 Elbow Multilayer Crimp Fitting 51045 ∙ 20mm Brass 90 Elbow Multilayer Crimp Fitting 51043 ∙ 25mm Brass 90 Elbow Multilayer Crimp Fitting 51047 ∙ 32mm Brass 90 Elbow Multilayer Crimp Fitting Male Elbows (16mmx⅜” BSP (M) - 32mmx1” BSP (M)): 51096 ∙ 16mm x 1/2" Male Iron Elbow Multilayer Crimp Fitting 51098 ∙ 20mm x 3/4" Male Iron Elbow Multilayer Crimp Fitting 51099 ∙ 25mm x 1" Male Iron Elbow Multilayer Crimp Fitting Female Elbows (16mmx⅜ BSP (F) - 32mmx1” BSP (F)): 51096 ∙ 16mm x 1/2" Female Iron Elbow Multilayer Crimp Fitting 51108 ∙ 16mm x 1/2" Female Iron Elbow Multilayer Crimp Fitting 51109 ∙ 20mm x 3/4" Female Iron Elbow Multilayer Crimp Fitting 51105 ∙ 25mm x 3/4" Female Iron Elbow Multilayer Crimp Fitting 51106 ∙ 25mm x 1" Female Iron Elbow Multilayer Crimp Fitting Equal Tees (16mm - 32mm): 51058 ∙ 16mm Brass Equal Tee Multilayer Crimp Fitting 51059 ∙ 20mm Brass Equal Tee Multilayer Crimp Fitting 51042 ∙ 25mm Brass Equal Tee Multilayer Crimp Fitting 51061 ∙ 32mm Brass Equal Tee Multilayer Crimp Fitting Unequal Tees (16mmx20mmx16mm - 32mmx26mmx32mm): 51140 ∙ 16x16x20mm Reducing Ends Tee Multilayer Crimp 51142 ∙ 20x16x16mm Reducing End & Branch Tee Multilayer Crimp 51121 ∙ 20x20x16mm Reducing Branch Tee Multilayer Crimp 51137 ∙ 20x20x25mm Reducing Ends Tee Multilayer Crimp 51124 ∙ 25x25x16mm Reducing Branch Tee Multilayer Crimp 51147 ∙ 25x20x20mm Reducing End & Branch Tee Multilayer Crimp 51125 ∙ 25x25x20mm Reducing Branch TEE Multilayer Crimp 51129 ∙ 32x32x20mm Reducing Branch Tee Multilayer Crimp 51130 ∙ 32x32x25mm Reducing Branch Tee Multilayer Crimp Female Tee (16mmx16mmx⅜” BSP (F) - 32mmx32mmx1” BSP (F)): 51155 ∙ 16mm x 1/2" Female Iron Branch Tee Multilayer Crimp 51156 ∙ 20mm x 1/2" Female Iron Branch Tee Multilayer Crimp 51157 ∙ 25mm x 3/4" Female Iron Branch Tee Multilayer Crimp Wall-plated female elbow (16mmx⅜” BSP (F) - 26mmx¾” BSP (F)): 51171 ∙ 16mm x 1/2" Backplate Elbow Multilayer Crimp 51173 ∙ 20mm x 3/4" Backplate Elbow Multilayer Crimp. _________

Approval Holder:: Brymec Ltd

Company Name
Brymec Ltd
Address
Redlands , Coulsdon, Surrey
Postcode
CR5 2HT
Country
United Kingdom
General Email
Jeremy.douglas@brymec.com

View All Listings by this Company

WRAS Approval Number: #251015003

Range of plastic and DZR brass pushfit fittings for use with PE-x pipe (manufactured to BS7291-3), PB pipe (manufactured to BS7291-2) and copper pipes (manufactured to EN 1057). Maximum working pressure 10.0 bar, except tank connectors which are open outlet use only. Cold water use only. From March 2026: Maximum operating temperature 65°C for all models except tank connectors.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251015003
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: R008 applies to the ATC tank connectors.
Size:: See model.
Marking:: Twistloc company logo (‘TLC’) and size either on body and/or collet.
Installation Requirements:: R001 R008
Expiry date:: 31/10/2030
Model:: Plastic Fittings: SMF6741M-2P - 2 Ports Manifold 22mm pushfit x 10mm pushfit x 10mm pushfit. SMF6746M-2P - 2 Ports Manifold 22mm pushfit x 15mm pushfit x 15mm pushfit. SMF6741M-4P - 4 Ports Manifold 22mm pushfit x 10mm pushfit x 10mm pushfit x 10mm pushfit. ATC44M - Tank connector 22mm pushfit x ¾" BSP (M). ATC66M - Tank connector 15mm pushfit x ½” BSP (M). ATC00M - Tank connector 28mm pushfit x 1” BSP (M). ATC44MBK - Tank connector 22mm pushfit x ¾" BSP (M). ATC66MBK - Tank connector 15mm pushfit x ½” BSP (M). ATC00MBK - Tank connector 28mm pushfit x 1” BSP (M). DZR Brass Fittings: SBFCA6741M - Cylinder Adaptor 22mm pushfit x 1" BSP (F). SBFA6764M - Female Coupler 15mm pushfit x ½" BSP (F). SBFA6765M - Female Coupler 15mm pushfit x ¾" BSP (F). SBFA6745M - Female Coupler 22mm pushfit x ¾" BSP (F). SBMCC6741M - Cylinder Adaptor 22mm pushfit x 1" BSP (M). SBMC6714M - Male Coupler 10mm pushfit x ½" BSP (M). SBMC6764M - Male Coupler 15mm pushfit x ½" BSP (M). SBMC6745M - Male Coupler 22mm pushfit x ¾" BSP (M). SBBPE6764M - Back Plate Elbow 15mm pushfit x ½" BSP (F). SBMSA6764M - Male Stem Adaptor 15mm x ½" BSP (M). SBMSA6745M - Male Stem Adaptor 22mm x ¾" BSP (M). SBMSA6701M - Male Stem Adaptor 28mm x 1" BSP (M). SBFSA6764M - Female Stem Adaptor 15mm x ½" BSP (F). SBFSA6745M - Female Stem Adaptor 22mm x ¾” BSP (F).

Approval Holder:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200
General Email
nchoi@twistloc.com

View All Listings by this Company
Manufacturer:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200
General Email
nchoi@twistloc.com

View All Listings by this Company

WRAS Approval Number: #250602054

'Flomasta' range of push-fit fittings with PEX-b, polysulphone or PPE bodies, supplied with polysulphone inserts. For use with PEX pipe (manufactured to BSEN 7291 part 3), PB (manufactured to BSEN 7291 part 2) and copper pipe (EN1057). Maximum working pressure/temperature: 12.5 Bar @ 20°C. As of October 2025: Maximum working pressure/temperature 3 Bar @ 92°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250602054
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 10mm, 15mm, 22mm, 28mm
Marking:: TLC (TwistLoc logo) and size on body
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: ‘Flomasta’ range comprising of models: SRDE6764M 15mmX1/2"BSP DROP EAR ELBOW SRF6764M 15mmX1/2"BSP FEMALE ADAPTOR SRF6765M 15mmX3/4"BSP FEMALE ADAPTOR SRF6745M 22mmX3/4"BSP FEMALE ADAPTOR SRF6701M 28mmX1"BSP FEMALE ADAPTOR SPU6711M 10mm STR UNION SPU6766M 15mm STR UNION SPU6744M 22mm STR UNION SPU6700M 28mm STR UNION SPU6761M 15mmX10mm REDUCING STR UNION SPU6746M 22mmX15mm REDUCING STR UNION SRSE6714M 10mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6764M 15mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6765M 15mmX3/4"BSP SWIVEL ELBOW (Hand Tighten) SRSE6714BM 10mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6764BM 15mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6765BM 15mmX3/4"BSP SWIVEL ELBOW (Brass Nut) SPSU6714M 10mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6764M 15mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6765M 15mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6745M 22mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6714BM 10mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6764BM 15mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6765BM 15mmX3/4"BSP SWIVEL UNION (Brass Nut) SPSU6745BM 22mmX3/4"BSP SWIVEL UNION (Brass Nut) SPST671M 10mm END STOP SPST676M 15mm END STOP SPST674M 22mm END STOP SRST670M 28mm END STOP SPE6711M 10mm ELBOW SPE6766M 15mm ELBOW SPE6744M 22mm ELBOW SPE6700M 28mm ELBOW SPE6761M 15mmX10mm REDUCING ELBOW SPE6746M 22mmX15mm REDUCING ELBOW SPATE6766M 15mm-135o STEM ELBOW SPATE6744M 22mm-135o STEM ELBOW SPR6716M 10mmX15mm REDUCER SPR6764M 15mmX22mm REDUCER SPR6760M 15mmX28mm REDUCER SPR6740M 22mmX28mm REDUCER SPT67111M 10mm TEE SPT67666M 15mm TEE SPT67444M 22mm TEE SPT67000M 28mm TEE SPT67611M 15mmX10mmX10mm REDUCING TEE SPT67661M 15mmX15mmX10mm REDUCING TEE SPT67664M 15mmX15mmX22mm REDUCING TEE SPT67466M 22mmX15mmX15mm REDUCING TEE SPT67464M 22mmx15mmx22mm REDUCING TEE SPT67441M 22mmx22mmx10mm REDUCING TEE SPT67446M 22mmX22mmX15mm REDUCING TEE SPT67044M 28mmX22mmX22mm REDUCING TEE SPT67040M 28mmX22mmX28mm REDUCING TEE SPT67001M 28mmX28mmX10mm REDUCING TEE SPT67006M 28mmX28mmX15mm REDUCING TEE SPT67004M 28mmX28mmX22mm REDUCING TEE SPTT67441M 22mX22mmX10mm TUBE TEE SPTT67446M 22mX22mmX15mm TUBE TEE SPTE6711M 10mm TUBE ELBOW SPTE6716M 10mmx15mm TUBE ELBOW SPTE6766M 15mm TUBE ELBOW SPTE6744M 22mm TUBE ELBOW SRMC6764M 15mmX1/2"BSPT MALE CONNECTOR SRME6764M 15mmX1/2"BSPT MALE ELBOW SRFWC6741M 22mmX10mm 4WAY MANIFOLD SRU6766SM 15mm SLIP UNION SRU6744SM 22mm SLIP UNION STS10M 10mm PIPE INSERT STS15M 15mm PIPE INSERT STS22M 22mm PIPE INSERT STS28M 28mm PIPE INSERT SRAV63M 15mm AIR-VENT CONNECTOR

Approval Holder:: Kingfisher International Products B.V

Company Name
Kingfisher International Products B.V
Address
Rapenburgerstraat 175E, 1011 VM Amsterdam
Country
Netherlands

View All Listings by this Company
Manufacturer:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200

View All Listings by this Company
Manufacturer:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200

View All Listings by this Company

WRAS Approval Number: #251012016

Range of end feed copper fittings for use with copper tube (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:: 1210 Fittings for use with Tube and Pipe
Section Subtitle:: End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251012016
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: Hengsheng logo (HS) and size on body.
Installation Requirements:: R001
Expiry date:: 31/10/2030
Model:: 5090 (90° Elbow Close Ruff CxC): 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 5092 (90° Street Elbow Close Ruff Ftg×C): 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 5090R (Reducing 90° Elbow C×C): 12mm×10mm, 12mm×8mm, 15mm×12mm, 22mm×15mm, 28mm×22mm, 28mm×15mm, 35mm×28mm, 35mm×22mm, 42mm×35mm, 42mm×28mm, 54mm×42mm, 54mm×35mm, 54mm×28mm. 5041 (45° Elbow C×C): 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 5040 (45° Elbow FTG×C): 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 5002A (90° Elbow Long Turn C×C): 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 5001A (90°Street Elbow Long Turn Ftg×C): 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 5130 (Equal Tee C×C×C): 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 5130R (Reducing TEE C×C×C): 6mm×6mm×8mm, 8mm×8mm×10mm, 8mm×8mm×6mm, 10mm×10mm×15mm, 10mm×10mm×12mm, 10mm×10mm×8mm, 12mm×12mm×18mm, 12mm×12mm×16mm, 12mm×12mm×15mm, 12mm×12mm×14mm, 12mm×12mm×10mm, 12mm×12mm×8mm, 12mm×12mm×6mm, 14mm×14mm×16mm, 14mm×14mm×12mm, 14mm×14mm×10mm, 15mm×15mm×22mm, 15mm×15mm×12mm, 15mm×15mm×10mm, 15mm×15mm×8mm, 18mm×18mm×22mm, 18mm×18mm×16mm, 18mm×18mm×15mm, 18mm×18mm×14mm, 18mm×18mm×12mm, 18mm×18mm×10mm, 22mm×22mm×28mm, 22mm×22mm×16mm, 22mm×22mm×15mm, 22mm×22mm×12mm, 22mm×22mm×10mm, 28mm×28mm×35mm, 28mm×28mm×22mm, 28mm×28mm×18mm, 28mm×28mm×16mm, 28mm×28mm×15mm, 28mm×28mm×14mm, 28mm×28mm×12mm, 28mm×28mm×10mm, 35mm×35mm×42mm, 35mm×35mm×28mm, 35mm×35mm×22mm, 35mm×35mm×15mm, 42mm×42mm×35mm, 42mm×42mm×28mm, 42mm×42mm×22mm, 42mm×42mm×15mm, 54mm×54mm×42mm, 54mm×54mm×35mm, 54mm×54mm×28mm, 54mm×54mm×22mm, 54mm×54mm×15mm, 8mm×6mm×6mm, 10mm×8mm×10mm, 12mm×10mm×10mm, 12mm×8mm×8mm, 14mm×12mm×12mm, 14mm×12mm×14mm, 15mm×12mm×15mm, 15mm×12mm×12mm, 15mm×12mm×10mm, 15mm×10mm×12mm, 15mm×12mm×8mm, 15mm×10mm×15mm, 15mm×10mm×10mm, 18mm×15mm×15mm, 18mm×15mm×18mm, 18mm×14mm×16mm, 18mm×12mm×18mm, 18mm×12mm×15mm, 18mm×12mm×12mm, 22mm×15mm×22mm, 22mm×15mm×15mm, 22mm×15mm×12mm, 28mm×22mm×28mm, 28mm×22mm×22mm, 28mm×22mm×18mm, 28mm×22mm×15mm, 28mm×18mm×28mm, 28mm×18mm×22mm, 28mm×15mm×28mm, 28mm×15mm×22mm, 28mm×15mm×15mm, 35mm×28mm×35mm, 35mm×28mm×28mm, 35mm×28mm×22mm, 35mm×22mm×35mm, 35mm×22mm×28mm, 35mm×22mm×22mm, 35mm×15mm×35mm, 42mm×35mm×35mm, 42mm×35mm×42mm, 42mm×28mm×42mm, 42mm×22mm×42mm, 54mm×42mm×42mm, 54mm×42mm×54mm, 54mm×35mm×54mm. 5270 (Equal Coupling C×C): 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 5240 (Reducing Coupling C×C): 8mm×6mm, 10mm×8mm, 10mm×6mm, 12mm×10mm, 12mm×8mm, 12mm×6mm, 14mm×12mm, 14mm×10mm, 15mm×12mm, 15mm×10mm, 15mm×8mm, 16mm×15mm, 16mm×14mm, 16mm×12mm, 16mm×10mm, 18mm×10mm, 22mm×18mm, 22mm×15mm, 22mm×14mm, 22mm×12mm, 22mm×10mm, 28mm×22mm, 28mm×18mm, 28mm×16mm, 28mm×15mm, 28mm×14mm, 28mm×12mm, 35mm×28mm, 35mm×22mm, 35mm×15mm, 42mm×35mm, 42mm×28mm, 42mm×22mm, 42mm×18mm, 42mm×16mm, 42mm×15mm, 54mm×42mm, 54mm×35mm, 54mm×28mm, 54mm×22mm, 54mm×15mm. 5243 (Fitting Reducer Ftg×C): 8mm×6mm, 10mm×8mm, 10mm×6mm, 12mm×10mm, 12mm×8mm, 12mm×6mm, 14mm×12mm, 14mm×10mm, 15mm×12mm, 15mm×10mm, 15mm×8mm, 16mm×15mm, 16mm×14mm, 16mm×12mm, 16mm×10mm, 18mm×16mm, 18mm×15mm, 18mm×14mm, 18mm×12mm, 18mm×10mm, 22mm×16mm, 22mm×15mm, 22mm×14mm, 22mm×12mm, 22mm×10mm, 28mm×22mm, 28mm×16mm, 28mm×15mm, 28mm×12mm, 35mm×28mm, 35mm×22mm, 35mm×18mm, 35mm×15mm, 42mm×35mm, 42mm×28mm, 42mm×22mm, 42mm×18mm, 42mm×15mm, 54mm×42mm, 54mm×35mm, 54mm×28mm, 54mm×22mm, 54mm×15mm. 5301 (Tube Cap): 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 5060 (Return Bend C×C): 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm 5085 (Cross Over Coupling C×C): 15mm, 22mm. 5086 (Partial Cross Over Ftg×C): 15mm, 22mm. 5062 (Straight Tap Connector C×FI): 15mm×1/2", 15mm×3/4", 22mm×3/4", 22mm×1", 28mm×1". 5063 (Bent Tap Connector C×FI): 15mm×1/2", 15mm×3/4", 22mm×3/4", 22mm×1", 28mm×1".

Approval Holder:: Ningbo Hengsheng Pipe Fitting Co.,Ltd.

Company Name
Ningbo Hengsheng Pipe Fitting Co.,Ltd.
Address
No. 28, West Jinshui Road, Ninghai, Ningbo, Zhejiang
Country
China
Phone
0086-574-65338995
General Email
sales@hengshen.com

View All Listings by this Company

WRAS Approval Number: #251008013

Range of DZR brass metering stations supplied with red and blue test points. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” - 2” BSP, BSPP or NPT (FxM).
Marking:: NINGBO RIAN VALVE CO.,LTD logo on the body.
Installation Requirements:: R001
Expiry date:: 31/10/2030
Model:: 278-XX. Where XX can be replaced with: DN15UUL, DN15UL， DN15L， DN15M， DN15, DN20, DN25, DN32, DN40, DN50.

Approval Holder:: Ningbo Rian Valve Co.,Ltd

Company Name
Ningbo Rian Valve Co.,Ltd
Country
China

View All Listings by this Company
Manufacturer:: Ningbo Rian Valve Co.,Ltd

Company Name
Ningbo Rian Valve Co.,Ltd
Country
China

View All Listings by this Company

WRAS Approval Number: #251008303

Section:: 1650 Shower Outlets
Description:: A Shower head(s) and/or shower handset(s).
Undefinable Air Gap - See IRN's
Installation Requirements:: R001 R040
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
26.409.000	chrome	G 1/2"	Open Outlet bar	65 °C	Grohe	Faceplate	No

Approval Holder:: Grohe AG

Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company
Manufacturers:: Grohe AG

WRAS Approval Number: #250988002

‘Union Range’ of wall mounted shower arms (brass bodies) and overhead showers (plastic bodies) both with various finishes (see models). Maximum operating temperature 85°C.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 250988002
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model
Marking:: Crosswater ‘X’ logo on body
Installation Requirements:: R001 R040
Expiry date:: 30/09/2030
Model:: UB250x – ½” BSP (F) UB400x – ½” BSP (M)

Approval Holder:: Crosswater Ltd.

Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

WRAS Approval Number: #250612005

Range of shower handsets with plastic bodies and various finishes. Maximum operating temperature 60 °C. Open outlet use only.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 250612005
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M)
Marking:: “KEEKOE” on inlet connection.
Installation Requirements:: R001 R040
Expiry date:: 30/06/2030
Model:: H01011, H01023, H02013, , H03013, H03021, H04011, H04023, H05014, H05015, H06013, H09015, H11013, H12013, H17015, H20013, H21011, H27015, H28013, H29033, H30043, H31015, H33013, H34013, H34021, H35013, H36011, H34021, H34021, H43014, H46014, H39033, H37013, H39031, H39013, H39043, H49014, H48013, H48021, H46023, H55013, H56013, H41013 & H42013.

Approval Holder:: Xiamen Keekoe Sanitary Ware Co. Ltd.

Company Name
Xiamen Keekoe Sanitary Ware Co. Ltd.
Address
No.275-279 Huanzhu Road North Jimei Industrial Zone Xiamen
Country
China

View All Listings by this Company

WRAS Approval Number: #251112303

Section:: 1650 Shower Outlets
Description:: A Range of Shower head(s) and/or shower handset(s).
Pull out plastic body handset for kitchen tap.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R040
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Spout Outlet
51OH-**	Various	G1/2(M)	open outlet bar	65 °C	KAIPING BOYU	BODY	No	Not applicable	Aerator
52CS-**	Various	G1/2(M)	open outlet bar	65 °C	KAIPING BOYU	BODY	No	Not applicable	Aerator
52DS-**	Various	G1/2(M)	open outlet bar	65 °C	KAIPING BOYU	BODY	No	Not applicable	Aerator
52OH-**	Various	G1/2(M)	open outlet bar	65 °C	KAIPING BOYU	BODY	No	Not applicable	Aerator
53OS-**	Various	G1/2(M)	open outlet bar	65 °C	KAIPING BOYU	BODY	No	Not applicable	Aerator
62OS-**	Various	G1/2(M)	open outlet bar	65 °C	KAIPING BOYU	BODY	No	Not applicable	Aerator
62OH-**	Various	G1/2(M)	open outlet bar	65 °C	KAIPING BOYU	BODY	No	Not applicable	Aerator
6301-**	Various	G1/2(M)	open outlet bar	65 °C	KAIPING BOYU	BODY	No	Not applicable	Aerator
6302-**	Various	G1/2(M)	open outlet bar	65 °C	KAIPING BOYU	BODY	No	Not applicable	Aerator
6303-**	Various	G1/2(M)	open outlet bar	65 °C	KAIPING BOYU	BODY	No	Not applicable	Aerator
63OH-**	Various	G1/2(M)	open outlet bar	65 °C	KAIPING BOYU	BODY	No	Not applicable	Aerator
6300-**	Various	G1/2(M)	open outlet bar	65 °C	KAIPING BOYU	BODY	No	Not applicable	Aerator
42OS-**	Various	G3/8(M)	open outlet bar	65 °C	KAIPING BOYU	BODY	No	Not applicable	Aerator
42OH-**	Various	G3/8(M)	open outlet bar	65 °C	KAIPING BOYU	BODY	No	Not applicable	Aerator
53OH-**	Various	G1/2(M)	open outlet bar	65 °C	KAIPING BOYU	BODY	No	Not applicable	Aerator

Notes & Further Information: ** Representative all models are available with the following finish code: CP-Polished Chrome BN-Brushed Nickel MB-Matte Black ORB-Oil Rubber Bronze PB-Polished Brass WP-Weathered Pewter BB-Brushed Brass

Approval Holder:: Kaiping Boyu Hose Technology Co., Ltd.

Company Name
Kaiping Boyu Hose Technology Co., Ltd.
Address
5 Dongcheng Road, Shuinuancheng, Shuikou Town, Kaiping City Guangdong Province
Country
China

View All Listings by this Company
Manufacturers:: Kaiping Boyu Hose Technology Co., Ltd.

WRAS Approval Number: #250804010

Range of Y-pattern strainers with DZR brass bodies and stainless steel strainers. The compression connection is for use with copper pipe to BS EN1057. Maximum working pressure 20 bar (BSP threaded models ½”-2”), 16.0 bar (compression models). Maximum operating temperature 85°C.

Section:: 1715 Strainers
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: see models
Marking:: HC logo, WRAS, date of manufacture: CR, MM-YY, flow arrow, PN, DN on body
Installation Requirements:: R001 R120
Expiry date:: 31/08/2030
Model:: HC-30822-15 1/2" BSP (F) HC-30822-20 3/4" BSP (F) HC-30822-25 1" BSP (F) HC-30822-32 1-1/4" BSP (F) HC-30822-40 1-1/2" BSP (F) HC-30822-50 2" BSP (F) HC-Y30202-15 15MM Compression HC-Y30202-22 22MM Compression

Approval Holder:: Home Creator Group Ltd

Company Name
Home Creator Group Ltd
Address
167 - 169 Great Portland Street London
Postcode
W1W 5PF
Country
United Kingdom

View All Listings by this Company

WRAS Approval Number: #250502041

Range of `Y`-patterned strainers with either brass or DZR brass bodies, incorporating a stainless-steel mesh strainer. Maximum working pressure: 25.0 Bar (Models 36233, 36234, 36235, 36236, 36237 & 36238 ) or 16.0 Bar (Models 36230 & 36231 ) Maximum operating temperature 95°C. Strainers with compression connections are to be used with copper pipe manufacture to BS EN 1057. Strainers with M profile press-fit connections are to be used with copper pipe manufactured to BS EN 1057 & SS304 Stainless steel pipe manufactured to EN 10312.

Section:: 1715 Strainers
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: SEE MODEL
Marking:: Brymec 'arrow' , size, DN , PN & flow arrow
Installation Requirements:: R001
Expiry date:: 31/05/2030
Model:: Brass Thread Y Pattern Strainer 36233 ½” BSP (F) inlet x outlet 36234 ¾” BSP (F) inlet x outlet 36235 1” BSP (F) inlet x outlet 36236 1¼” BSP (F) inlet x outlet 36237 1½” BSP (F) inlet x outlet 36238 2” BSP (F) inlet x outlet Brass Compression Y Pattern Strainer 36230 15mm compression inlet x outlet 36231 22mm compression inlet x outlet

Approval Holder:: Brymec Ltd

Company Name
Brymec Ltd
Address
Redlands , Coulsdon, Surrey
Postcode
CR5 2HT
Country
United Kingdom
General Email
Jeremy.douglas@brymec.com

View All Listings by this Company

WRAS Approval Number: #250312016

Range of in-line Y patterned strainers with bronze bodies and a stainless steel mesh strainer. Maximum working pressure 20 bar. Maximum operating temperature 85°C

Section:: 1715 Strainers
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (F) – 2” BSP (F)
Marking:: A.1, size, PN, arrow on body
Installation Requirements:: R001
Expiry date:: 31/03/2030
Model:: GMS201( ½”), GMS202( ¾”), GMS203( 1”), GMS204( 1¼”), GMS205( 1½”) & GMS206( 2”) BRONZE Y STRAINERS

Approval Holder:: EWAN ENGINEERING MANUFACTURING CO. (A.1jordan)

Company Name
EWAN ENGINEERING MANUFACTURING CO. (A.1jordan)
Address
JUWAIDEH INDUSTRIAL ZONE , JUTHAMAH AL-KENANI ST., AMMAN, JORDAN.

View All Listings by this Company

WRAS Approval Number: #251115302

Section:: 1780 Taps
Description:: A Range of Hose union tap(s).
Wall Mounted Undefinable air gap see IRNs Incorporates approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Installation Requirements:: R001 R040 R060
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list
13.20205.G15.CP03-8510	Chromed	BSP 1/2" (M)	16 bar	85 °C	Company logo (V&G), WRAS, size, production date (MM-YY)	Body	No
13.20205.G15.CP5R-8510		BSP 1/2" (M)	16 bar	85 °C	Company logo (V&G), WRAS, size, production date (MM-YY)	Body	No
13.20205.G15.CP5R-8511		BSP 1/2" (M)	16 bar	85 °C	Company logo (V&G), WRAS, CR, size, production date (MM-YY)	Body	No
13.20205.G20.CP03-8510	Chromed	BSP 3/4" (M)	16 bar	85 °C	Company logo (V&G), WRAS, size, production date (MM-YY)	Body	No
13.20205.G20.CP5R-8510		BSP 3/4" (M)	16 bar	85 °C	Company logo (V&G), WRAS, size, production date (MM-YY)	Body	No
13.20205.G20.CP5R-8511		BSP 3/4" (M)	16 bar	85 °C	Company logo (V&G), WRAS, CR, size, production date (MM-YY)	Body	No
13.20245.A15.CP5R-8510		BSP 1/2" (M)	16 bar	85 °C	Company logo (V&G), WRAS, size, production date (MM-YY)	Body	No
13.20245.A20.CP5R-8510		BSP 3/4" (M)	16 bar	85 °C	Company logo (V&G), WRAS, size, production date (MM-YY)	Body	No
13.20255.G15.CP03-8510	Chromed	BSP 1/2" (M)	16 bar	85 °C	Company logo (V&G), WRAS, size, production date (MM-YY)	Body	No
13.20255.G15.CP5R-8510		BSP 1/2" (M)	16 bar	85 °C	Company logo (V&G), WRAS, size, production date (MM-YY)	Body	No
13.20255.G15.CP5R-8511		BSP 1/2" (M)	16 bar	85 °C	Company logo (V&G), WRAS, CR, size, production date (MM-YY)	Body	No
13.20275.G15.CP5R-8510		BSP 1/2" (M)	16 bar	85 °C	Company logo (V&G), WRAS, size, production date (MM-YY)	Body	No
13.20305.G15.CP03-8510	Chromed	BSP 1/2" (M)	16 bar	85 °C	Company logo (V&G), WRAS, size, production date (MM-YY)	Body	No
13.20305.G15.CP5R-8510		BSP 1/2" (M)	16 bar	85 °C	Company logo (V&G), WRAS, size, production date (MM-YY)	Body	No
13.20305.G15.CP5R-8511		BSP 1/2" (M)	16 bar	85 °C	Company logo (V&G), WRAS, CR, size, production date (MM-YY)	Body	No
13.20305.G20.CP03-8510	Chromed	BSP 3/4" (M)	16 bar	85 °C	Company logo (V&G), WRAS, size, production date (MM-YY)	Body	No
13.20305.G20.CP5R-8510		BSP 3/4" (M)	16 bar	85 °C	Company logo (V&G), WRAS, size, production date (MM-YY)	Body	No
13.20305.G20.CP5R-8511		BSP 3/4" (M)	16 bar	85 °C	Company logo (V&G), WRAS, CR, size, production date (MM-YY)	Body	No
13.20365.G15.CP03-8510	Chromed	BSP 1/2" (M)	16 bar	85 °C	Company logo (V&G), WRAS, size, production date (MM-YY)	Body	No
13.20365.G15.CP5R-8510		BSP 1/2" (M)	16 bar	85 °C	Company logo (V&G), WRAS, size, production date (MM-YY)	Body	No
13.20365.G15.CP5R-8511		BSP 1/2" (M)	16 bar	85 °C	Company logo (V&G), WRAS, CR, size, production date (MM-YY)	Body	No

Approval Holder:: Zhejiang Valogin Technology Co., Ltd.

Company Name
Zhejiang Valogin Technology Co., Ltd.
Address
Qinggang Technological Industrial Zone Yuhuan, Zhejiang
Country
China

View All Listings by this Company
Manufacturers:: Zhejiang Valogin Technology Co., Ltd.

WRAS Approval Number: #250702058

Range of air venting valves with blue epoxy coated ductile iron or plastic bodies with plastic floats. Maximum working pressure 16.0 Bar. Cold water use only.

Section:: 1980 Valves
Section Subtitle:: Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:: 250702058
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” - 6” BSPT (M) & DN150 - 200 flanged
Marking:: A.R.I, Aquestia logo and product information on adhesive label on body
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: D-040 C 3/4" ,1",2". D-040 L 3/4" ,1",2". D-040 3/4" ,1",2". D-43 NS 2", 3",4",6" (DN150 flanged),8" (DN200 flanged). D-43 2", 3",4",6" (DN150 flanged),8" (DN200 flanged). D-46 2",3",4",6" (DN150 flanged). D-46 NS 2",3",4",6" (DN150 flanged). S-050 1/2",3/4",1". S-050-C 1/2",3/4",1". S-050 L 1/2",3/4",1". S-052 1/2",3/4",1". NS- Non Slam L- Long C- Casted (cover with casted cup).

Approval Holder:: Aquestia Italy SrL

Company Name
Aquestia Italy SrL
Address
Sede Amministrativa e Operativa Via Carlo Dell' Acqua 7 20027 Rescaldina MI
Country
Italy
Phone
+972507603989
General Email
orly.yariv@aquestia.com

View All Listings by this Company
Manufacturer:: Aquestia Ltd.

Company Name
Aquestia Ltd.
Address
Kfar Charouv Ramat Hagolan
Postcode
12932000
Country
Israel
General Email
orly.yariv@aquestia.com

View All Listings by this Company
Manufacturer:: Aquestia Ltd.

Company Name
Aquestia Ltd.
Address
Kfar Charouv Ramat Hagolan
Postcode
12932000
Country
Israel
General Email
orly.yariv@aquestia.com

View All Listings by this Company

WRAS Approval Number: #250702059

Range of automatic air release valves with blue epoxy coated stainless steel bodies and plastic or stainless-steel floats. Maximum working pressure 16.0, 25.0 or 40.0 bar (See Models below). Cold water use only.

Section:: 1980 Valves
Section Subtitle:: Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:: 250702059
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 2” to 8” Flanged (See models), 2” BSPT (M) (See models).
Marking:: A.R.I by Aquiesta on body. A.R.I, Aquiesta and product information on adhesive label on body.
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: D-050 (2",3",4",6",8" Flanged & 2” BSP (M). 16.0 bar), D-050-C (2",3",4",6",8" Flanged. 16.0 bar), D-052 (2",3",4",6",8" Flanged. 25.0 bar), D-055 (2",3",4" Flanged. 40.0 bar), D-060 (2",3",4",6",8" Flanged & 2” BSP (M).16.0 bar), D-060-C (2",3",4",6",8" Flanged. 16.0 bar), D-060-NS (2",3",4",6",8" Flanged. 16.0 bar), D-060-C-NS (2",3",4",6",8" Flanged. 16.0 bar), D-062 (2",3",4",6",8" Flanged & 2” BSP (M). 25.0 bar), D-062 NS (2",3",4",6",8" Flanged. 25.0 bar), D-065 (2",3",4",6",8" Flanged. 40.0 bar), D-065-NS (2",3",4",6",8" Flanged. 40.0 bar), K-050 (2",3",4",6",8" Flanged. 16.0 bar).

Approval Holder:: Aquestia Italy SrL

Company Name
Aquestia Italy SrL
Address
Sede Amministrativa e Operativa Via Carlo Dell' Acqua 7 20027 Rescaldina MI
Country
Italy
Phone
+972507603989
General Email
orly.yariv@aquestia.com

View All Listings by this Company
Manufacturer:: Aquestia Ltd.

Company Name
Aquestia Ltd.
Address
Kfar Charouv Ramat Hagolan
Postcode
12932000
Country
Israel
General Email
orly.yariv@aquestia.com

View All Listings by this Company
Manufacturer:: Aquestia Ltd.

Company Name
Aquestia Ltd.
Address
Kfar Charouv Ramat Hagolan
Postcode
12932000
Country
Israel
General Email
orly.yariv@aquestia.com

View All Listings by this Company

WRAS Approval Number: #251102304

Section:: 2000 Shower Valves
Description:: A Shower valve(s) with manual temperature control.
Wall mounted. Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection).
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
71 681 xx0	Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish	G 1/2 (offset)	10 bar	70 °C	hansgrohe	on the handle	Yes	Ceramic cartridge		Not Applicable

Notes & Further Information: Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturers:: Hansgrohe d.o.o.

WRAS Approval Number: #251088303

Section:: 2010 Shower Valves
Description:: A Range of Shower valve(s) with thermostatic temperature control
Wall Mounted Incorporates approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Some models include wall outlets - See manufacturer’s instructions for model-specific details.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R040
Expiry date:: 31/10/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
* M980116 X XXX	VARIOUS	15mm compression	5.0 bar	65 °C	PPI	Body	No	Ceramic cartridge	Not Applicable	Not Applicable	Shower Hose, Handset, Riser Rail,
* 803250 X XXX	VARIOUS	15mm compression	5.0 bar	65 °C	PPI	Body & Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Shower Hose, Handset, Riser Rail,
* 801528 X XXX	VARIOUS	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	PPI	Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Riser Rail,
* 803251 X XXX	VARIOUS	15mm compression	5.0 bar	65 °C	PPI	Faceplate	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Shower Hose, Handset, Fixed Head, Riser Rail,
* 801524 X XXX	VARIOUS	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	PPI	Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
* 801525 X XXX	VARIOUS	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	PPI	Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
* 800204 X XXX	VARIOUS	15mm compression	10.0 bar	60 °C	PPI	Body	No	Single sequential	Metal Backnuts	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Riser Rail,
* 804203 X XXX	VARIOUS	15mm compression	10.0 bar	65 °C	PPI	Body	No	1/4 Turn ceramic disk	Metal Backnuts	Not Applicable	Shower Hose, Handset, Riser Rail,
* 801508 X XXX	VARIOUS	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	PPI	Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Riser Rail,
* 801509 X XXX	VARIOUS	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	PPI	Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Riser Rail,
* 801510 X XXX	VARIOUS	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	PPI	Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Riser Rail,

Notes & Further Information: The “*” is for a different Overhead Shower, Shower Hose or Shower Handset, which represent the letters A to Z X XXX Denotes the following: First X: Different handle The second, third & fourth XXX for different finishes: Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Approval Holder:: PPI Xiamen Industry Co., Ltd.

Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturers:: PPI XIAMEN INDUSTRY CO LTD

WRAS Approval Number: #251088304

Wall Mounted shower valve with shower hand-set, hose with riser rail and overhead shower, available in various finishes. A05846 incorporates a single sequential headwork, all other models incorporate 1/4 turn ceramic disc headwork. Some model include a flow regulator. Models A5846 & A05847 maximum pressure 10.0 bar. All other models maximum pressure 5.0 bar Maximum temperature all models 65°C

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 251088304
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½”x ¾” BSP (M) offset unions or 15mm compression.
Marking:: 'nabis' on shower valve body
Installation Requirements:: R001 R040
Expiry date:: 31/10/2030
Model:: A05839, A05840, A05841, A05842, A05843, A05844, A05845, A05846 & A05847.

Approval Holder:: Wolseley UK Ltd.

Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

WRAS Approval Number: #2312091

Range of butterfly valves with blue epoxy coated ductile iron bodies and stainless-steel discs incorporating EPDM rubber seats. (DN40 - DN200) incorporate a lever type operating member and (DN250 – DN500) incorporates a hand wheel type operating member. Maximum working pressure - 16 Bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 2020 Valves
Section Subtitle:: Butterfly.
WRAS Approval Number:: 2312091
Size:: DN40 - DN500 flanged
Marking:: OTTO & size on body
Installation Requirements:: R001
Expiry date:: 31/12/2028
Model:: OW-BFWL-16Q, OW-BFWG-16Q, OW-BFLL-16Q, OW-BFLG-16Q.

Approval Holder:: Barr Al-Amman International

Company Name
Barr Al-Amman International
Address
Sanibil Centre Azizia District Baladia Street Jeddah
Country
Saudi Arabia
Phone
+966 056 652 5154
General Email
hafiz@barralaman.com.sa

View All Listings by this Company

WRAS Approval Number: #250915011

Range of wafer or lugged butterfly valves incorporating blue epoxy coated ductile iron bodies, EPDM seats and stainless-steel discs. The LTDX71X-16Q DN40-150 size models are lever operated; all other models and sizes are gear operated. Maximum working pressure 10.0 bar or 16.0 bar. Maximum operating temperature 100°C.

Section:: 2020 Valves
Section Subtitle:: Butterfly.
WRAS Approval Number:: 250915011
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN40 - DN300.
Marking:: Flowtec logo, Model No., Serial No., Temp range, NPS on plate; DN PN on body
Installation Requirements:: R001
Expiry date:: 30/09/2030
Model:: DX71X-16Q (wafer), LTDX71X-16Q (lugged).

Approval Holder:: FLOWTEC ENGINEERING (UK) LTD.

Company Name
FLOWTEC ENGINEERING (UK) LTD.
Address
71-75 Shelton Street, Covent Garden London
Postcode
WC2H 9JQ
Country
United Kingdom
Phone
0044 07424977390
General Email
inquiry@flowtec.uk

View All Listings by this Company

WRAS Approval Number: #2207409

Range of high and low pressure diaphragm float operated valves with brass body and backnuts. Maximum working pressure 8.0 or 10.0 bar (please refer to model). Cold water use only.

Section:: 2080 Valves
Section Subtitle:: Float operated, diaphragm, metal.
WRAS Approval Number:: 2207409
Note:: For use with floats complying with BS 2456, not supplied.
Size:: ½” or ¾” BSP(M)
Marking:: HC logo, WRAS, date of manufacture MM/YY on body. All models marked with BS1212/2.
Installation Requirements:: R001
Expiry date:: 31/07/2027
Model:: HC-F20102-15 1/2" PT2 Float Ball Valve HP 10 bar HC-F20102-20 3/4" PT2 Float Ball Valve HP 10 bar.

Approval Holder:: Home Creator Group Ltd

Company Name
Home Creator Group Ltd
Address
167 - 169 Great Portland Street London
Postcode
W1W 5PF
Country
United Kingdom

View All Listings by this Company

WRAS Approval Number: #2207408

Range of piston type float operated inlet valves with brass bodies and backnuts. Maximum working pressure 8.0 or 10.0 bar (please refer to model). Cold water use only.

Section:: 2120 Valves
Section Subtitle:: Float operated, piston type.
WRAS Approval Number:: 2207408
Note:: For use with floats complying with BS 2456, not supplied. All models, except HC-F10102-15 & HC-10172-20 are marked with BS1212/1.
Size:: ½”, ¾” or 1” BSP(M)
Marking:: HC logo, WRAS, date of manufacture MM/YY on body.
Installation Requirements:: R001
Expiry date:: 31/07/2027
Model:: HC-F10102-15 1/2" PT1 Float Ball Valve HP 10 bar HC-10172-15 1/2" PT1 Float Ball Valve LP 8 bar HC-F10102-20 3/4" PT1 Float Ball Valve HP 10 bar HC-10172-20 3/4" PT1 Float Ball Valve LP 8 bar HC-10172-25 1" PT1 Float Ball Valve 10 bar

Approval Holder:: Home Creator Group Ltd

Company Name
Home Creator Group Ltd
Address
167 - 169 Great Portland Street London
Postcode
W1W 5PF
Country
United Kingdom

View All Listings by this Company

WRAS Approval Number: #2204113

Range of adjustable, bronze in-line pressure reducing valves. Models 131201015, 131201020 & 131201025 and model 131201032 have inspection ports on the outlet only. Models 131201050 & 131201100 sizes have inspection ports on the inlet and outlet. The valves incorporate a stainless-steel strainer. Maximum inlet supply pressure 20.0 bar. Maximum outlet pressure 1.0 bar to 4.0 bar. Maximum operating temperature 70°C.

Section:: 2200 Valves
Section Subtitle:: Pressure reducing.
WRAS Approval Number:: 2204113
Size:: Please refer to model.
Marking:: TYNE, flow arrow, size & PN cast on body.
Installation Requirements:: R001
Expiry date:: 30/04/2027
Model:: 131201015: ½” PRESSURE REDUCING VALVES 131201020: ¾” PRESSURE REDUCING VALVES 131201025: 1” PRESSURE REDUCING VALVES 131201032: 1¼” PRESSURE REDUCING VALVES 131201040: 1½” PRESSURE REDUCING VALVES 131201050: 2” PRESSURE REDUCING VALVES 131201065: 2½” PRESSURE REDUCING VALVES 131201080: 3” PRESSURE REDUCING VALVES 131201100: 4” PRESSURE REDUCING VALVES

Approval Holder:: Tyne Flow Ltd

Company Name
Tyne Flow Ltd
Address
411-422 Coventry Rd 1st Small Heath Birmingham
Country
UK

View All Listings by this Company

WRAS Approval Number: #250702728

Range of normally closed (L182 models) solenoid valves with brass bodies. Maximum working pressure 16.0 bar: 12900 Maximum working pressure 12.0 bar: 12903 & 12906 Maximum working pressure 10.0 bar: 12909 ,12912 & 12915 Maximum operating temperature 85.0°C

Section:: 2230 Valves
Section Subtitle:: Solenoid, metal.
WRAS Approval Number:: 250702728
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model
Marking:: Pegler & technical info on name plate Size and flow arrow on body.
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: Brass bodies: Maximum working pressure 16.0 bar: 12900 - Pegler Solenoid Valve 230v (DN15): ½” BSP (F). Maximum working pressure 12.0 bar: 12903 - Pegler Solenoid Valve 230v (DN20): ¾" BSP (F). 12906 - Pegler Solenoid Valve 230v (DN25): 1" BSP (F). Maximum working pressure 10.0 bar: 12909 - Pegler Solenoid Valve 230v (DN32): 1¼" (F) 12912 - Pegler Solenoid Valve 230v (DN40 : 1½” (F) 12915 - Pegler Solenoid Valve 230v (DN50): 2” BSP (F).

Approval Holder:: Aalberts Integrated Piping Systems Ltd.

Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company