TOOLSTATION LTD Approvals


#1906134

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork with either a single lever or cross-top operating members. The spout outlets incorporate a plastic aerator or a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906134
Expiry date:
30/06/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½" captive nut end connections.
Marking:
ebb & flo (Trademark of Toolstation) on rear of tap body
Installation Requirements:
R001 R006 R010
Model:
69736 Porth Mono Mixwer Kitchen Tap
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#1905088

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate an EPDM washer on the inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905088
Expiry date:
31/05/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut connections.
Marking:
ebb & flo (Trademark of Toolstation) on rear of tap body
Installation Requirements:
R001 R006 R010
Model:
14780 CHESIL MONO MIXER KITCHEN TAP & 38515 FILEY MONO MIXER KITCHEN TAP
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#1907073

Range of high neck basin pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic flow straightener & the products are supplied with metal back nuts. Maximum working pressure 10.0 bar Maximum operating temperature 70°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
1907073
Expiry date:
31/07/2024
Size:
½” BSP (M)
Marking:
EBB & FLO (TRADEMARK OF TOOLSTATION) ON REAR OF TAP BODY
Installation Requirements:
R001 R006
Model:
31110 CONTRACT LEVER PILLAR TAPS
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2001107

Deck mounted, single hole, single outlet (fixed) pillar taps, incorporating a non-rising spindle headwork with dome type operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2001107
Expiry date:
31/01/2025
Size:
½” BSP male
Marking:
ebb & flo (Trademark of Toolstation) on rear of tap body.
Installation Requirements:
R001 R006
Model:
52398 CONTRACT PILLAR TAPS
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#1906153

Range of pillar taps (chrome plated brass) incorporating a quarter turn ceramic disc headworks with a single lever operating member controlling the flow. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 10.0 Bar, Maximum operating temperature 70°C

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
1906153
Expiry date:
30/06/2024
Size:
½” BSP (M) or ¾” BSP (M)
Marking:
ebb & flo on tap base
Installation Requirements:
R001 R005
Model:
52104 Braye Bath & Braye Basin PILLAR TAPS
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#1906154

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a quarter turn ceramic disc headwork with single lever operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The inlets incorporate a stainless strainer and an approved single check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
1906154
Expiry date:
30/06/2024
Size:
¾” BSP (M)
Marking:
ebb & flo on tap body
Installation Requirements:
R001 R006 R020
Model:
52515 Thermostatic bath shower mixer COMBINATION TAP ASSEMBLY
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2002804

Self closing basin tap (chromium plated brass) with spring loaded headwork and dome type operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar, Maximum operating temperature 85°C.

Section:
1820 Taps
Section Subtitle:
Self closing, metal.
WRAS Approval Number:
2002804
Expiry date:
28/02/2025
Size:
½” BSP (M)
Marking:
ebb & flo on tap base
Installation Requirements:
R001 R006
Model:
60081 Non Concussive Basin & 35537 Non Concussive COMBINATION TAP ASSEMBLIES
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#1907398

Range of spherical servicing valves having nickel plated ( brass bodies and EPDM ‘O’-rings and can be lever type or screwdriver operated. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
1907398
Expiry date:
31/07/2024
Size:
See model.
Marking:
TS, SIZE, FLOW ARROW, BATCH CODE & V ON BODY EN1254-2 & SIZE ON NUT
Installation Requirements:
R001
Model:
71997: 15mm compression. 37336: 15mm compression. 16091: ISO valve with handle: 15mm compression. 95951: Angle Servicing valve: 15mm compression x ½” captive nut. 30684: Straight Servicing valve: 15mm compression x ½” captive nut.
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#1909411

Range of drain valves with brass and DZR brass bodies (natural or chromium plated finish) with EPDM gaskets and ‘o’rings. The valves incorporate a rising spindle headwork. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:
1770 Taps
Section Subtitle:
Draining, metal or plastic - For above ground use only.
WRAS Approval Number:
1909411
Expiry date:
30/09/2024
Size:
see model
Marking:
TS, BATCH CODE, V, BS2879-2 & SIZE ON BODY
Installation Requirements:
R001 R511
Model:
96526-15mm natural Model added November 2020 83905
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#1912069

Range of in-line servicing valves (brass or nickel-plated brass body and ball) with EPDM gaskets and a screwdriver operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
1912069
Expiry date:
31/12/2024
Size:
22mm compression inlet/outlet
Marking:
TS, SIZE, FLOW ARROW, BATCH CODE & V ON BODY EN1254-2 & SIZE ON NUT
Installation Requirements:
R001
Model:
Screwdriver operated. 42958 (Nickel plated Brass)
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#1912070

Range of wall mounted hose union taps (various body materials) incorporating a non-rising spindle headwork with a butterfly handle operating member. The spout outlets incorporate a hose union connector. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:
1780 Taps
Section Subtitle:
Hose union, metal. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building. Where in existing house installations a hosepipe is to be used from an existing hose union tap located outside a house and which is not provided with backflow protection, either: a. The existing hose union tap should be provided with a double check valve (Type EC or ED) located inside the building; or b. The tap should be replaced with a hose union tap that incorporates a double check valve (type HUK1); or c. A hose union backflow prevention (Type HA) or a double check valve should be continuously fitted to the outlet of the tap; or d. Is legally installed in any premises.
WRAS Approval Number:
1912070
Expiry date:
31/12/2024
Size:
½” BSP (M)
Marking:
TS, SIZE, BATCH CODE, EN1213 7 V ON BODY
Installation Requirements:
R001 R040
Model:
60635 (natural brass).
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2005045

Range of double check valve assemblies consisting of two spring loaded in-line check valve cartridges housed in a DZR brass body with a drain port between the cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2005045
Expiry date:
31/05/2025
Note:
Not for use with water injected with CO2 gas.
Size:
See model.
Marking:
TS, CR FLOW ARROW & SIZE ON BODY SIZE ON END NUT
Installation Requirements:
R001
Model:
86881: 15mm compression inlet/outlet, 61921: 22mm compression inlet/outlet,
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2007077

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type waste. Maximum working pressure 10 bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007077
Expiry date:
31/07/2025
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
ebb & flo (brand of Toolstation) on tap body.
Installation Requirements:
R001 R006 R010
Model:
20761
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#1905402

Range of in-line adjustable (between 2.8 and 3.2 bar) pressure reducing valves with chrome plated DZR brass bodies and NBR ‘O’ rings. The valves incorporate test ports on the outlet side of the valve and a stainless-steel strainer. Maximum supply pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
1905402
Expiry date:
31/05/2024
Size:
15mm & 22mm compression. ½” BSP (F) & ¾” BSP (F).
Marking:
TS, CR & DATE OF MANUFACTURE YYYY/M/D on body
Installation Requirements:
R001 R120
Model:
44160 ADJUSTABLE PRESSURE REDUCING VALVES
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#1905405

Non-verifiable single check valve assemblies with a DZR brass body. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
1905405
Expiry date:
31/05/2024
Size:
see model
Marking:
TS, CR, FLOW ARROW & SIZE ON BODY
Installation Requirements:
R001
Model:
82559 – 15mm compression. 44278 – 22mm compression.
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2010403

Single hole, single outlet (swivel) comination tap assembly (chromium plated brass), incorporation a non-rising spindleheadwork with crosstop type operating members. The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010403
Expiry date:
31/10/2025
Size:
Stainless steel braided EPDM lined hose assembly with ½” BSP captive nut.
Marking:
ebb & flo on tap base
Installation Requirements:
R001 R006 R010
Model:
49944
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2010404

Single hole, single outlet (swivel) comination tap assembly (chromium plated brass). Incorporation a ceramic disc headwork with dome type operating members. The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010404
Expiry date:
31/10/2025
Size:
Stainless steel braided EPDM lined hose assembly with ½” BSP captive nut.
Marking:
ebb & flo on base of tap
Installation Requirements:
R001 R006 R010
Model:
88081 COLWELL MONO MIXER COMINATION TAP ASSEMBLY
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2001141

Range of deck mounted, single hole, single outlet (fixed) pillar taps, incorporating a non-rising spindle headwork with cross top operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2001141
Expiry date:
31/01/2025
Size:
½” BSP male
Marking:
ebb & flo on tap body.
Installation Requirements:
R001 R006
Model:
64284 Cross head Kitchen PILLAR TAPS
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2010405

Single hole, single outlet (swivel) comination tap assembly (chromium plated brass), incorporation a ceramic disc headwork with lever type operating members.The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010405
Expiry date:
31/10/2025
Size:
Stainless steel braided EPDM lined hose assembly with ½” BSP captive nut.
Marking:
ebb & flo on base of tap
Installation Requirements:
R001 R006 R010
Model:
26251 Seaton Mono Mixer Kitchen COMINATION TAP ASSEMBLY
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2105807

Range of pillar taps with brass bodies (chrome plated), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener or aerator. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating pressure 85°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2105807
Expiry date:
31/05/2026
Size:
See model
Marking:
ebb & flo on body
Installation Requirements:
R001 R005
Model:
½” BSP (M) 26452 ¾” BSP (M) 62548
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2012368

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Models 91742, 95660 incorporate a non-rising spindle headwork with dome type operating members. Model 21775 incorporate a non-rising spindle headwork with cross top operating members. Model 77174 incorporate a quarter turn ceramic disc headwork with single lever operating members. The fitting incorporates a manual diverter to the shower outlet The spout outlet incorporates a plastic flow straightener and the products are supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2012368
Expiry date:
31/12/2025
Size:
¾” BSP (M)
Marking:
ebb & flo on body
Installation Requirements:
R001 R020
Model:
91742, 21775, 95660 & 77174 combination tap assemblies
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2104341

Range of bib taps with DZR brass bodies. The inlet and the outlet of the tap incorporates approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1750 Taps
Section Subtitle:
Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
WRAS Approval Number:
2104341
Expiry date:
30/04/2026
Size:
Please see model
Marking:
TS, date of manufacture (MMYY), size & ‘CR’ on body.
Installation Requirements:
R001 R040
Model:
84080: ½” BSP (M). 44121: ¾” BSP (M).
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2104066

Range of wall mounted hose union tap brass body incorporating a non-rising spindle headwork with a butterfly handle operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1780 Taps
Section Subtitle:
Hose union, metal. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building. Where in existing house installations a hosepipe is to be used from an existing hose union tap located outside a house and which is not provided with backflow protection, either: a. The existing hose union tap should be provided with a double check valve (Type EC or ED) located inside the building; or b. The tap should be replaced with a hose union tap that incorporates a double check valve (type HUK1); or c. A hose union backflow prevention (Type HA) or a double check valve should be continuously fitted to the outlet of the tap; or d. Is legally installed in any premises.
WRAS Approval Number:
2104066
Expiry date:
30/04/2026
Size:
¾” BSP male inlet x 19mmØ hose outlet
Marking:
TS,size & date of manufacture MM/YY body.
Installation Requirements:
R001 R040
Model:
46332
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2108804

Range of two hole, single outlet, (fixed) combination tap assemblies (chromium plated brass), Models 49723, 26684 & 18193 incorporate a non rising spindle headwork with dome type operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. . Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2108804
Expiry date:
31/08/2026
Size:
¾” BSP (M)
Marking:
ebb & flo on body
Installation Requirements:
R001 R009 R010
Model:
49723 Contract Bath Mixer Tap, 18193 Traditional Bath Filler & 26684 Solva Bath Filler COMBINATION TAP ASSEMBLIES
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2108805

Range of pillar taps with brass bodies (various finishes) incorporating non-rising spindle headworks using either dome type or cross top operating members. Spout outlets incorporate plastic flow straighteners. The products are also supplied with metal back nuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2108805
Expiry date:
31/08/2026
Size:
See model
Marking:
ebb & flo on rear of body.
Installation Requirements:
R001 R006
Model:
½” BSP (M) 82199 Contract Basin Taps 77855 Solva Basin Taps 60283 Traditional Basin Taps 87748 Cross Head Basin Taps ¾” BSP (M) 90734 Contract Bath Taps 76111 Solva Bath Taps 25022 Traditional Bath Taps
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2204089

Range of quarter turn, lever handle or butterfly operated spherical valves with nickel plated brass bodies, chrome plated brass balls and PTFE seals. For use with copper pipe BS EN 1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2204089
Expiry date:
30/04/2027
Size:
SEE MODELS
Marking:
TS, size, date of manufacture (MM/YY) on body. ON/OFF, size and WRAS on lever.
Installation Requirements:
R001
Model:
Red handle circlip full bore ball valve models: 81118 15MM 77755 22MM Blue handle circlip full bore ball valve models: 57154 15MM 92144 22MM
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2205359

Range of spherical isolation valves incorporating brass bodies (nickel plated), brass ball (chrome plated), brass stem and EPDM ‘O’-rings (screwdriver operated ). For use with copper pipe (EN1057). Maximum working pressure 25.0 bar (model 76696) Maximum working pressure 40.0 bar (models 77164& 68376) Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2205359
Expiry date:
31/05/2027
Size:
see model
Marking:
TS, flow arrow, size, WRAS and date of manufacture (MM/YY) on body. EN1057 and size on compression nut. PN on body
Installation Requirements:
R001
Model:
15mm compression models: 77164 (Full bore) 76696 (Angled) 22mm compression models: 68376 (Full bore)
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2206367

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes). Incorporating a quarter turn ceramic disc headworks with either single lever, dome or cross-top operating members. The spout outlets incorporate plastic aerators or flow straighteners with a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2206367
Expiry date:
30/06/2027
Note:
R009 only applies to models supplied with PEX hoses.
Size:
Stainless steel braided EPDM or PEX lined flexible hoses with ½” BSP (F) captive nut end connections.
Marking:
Ebb & Flo body.
Installation Requirements:
R001 R006 R009 R010
Model:
Supplied with both variations of hose. 10852 Mono Mixer Kitchen Tap 34905 Lever Mono Mixer Kitchen Tap 91542 Hele Mono Mixer Kitchen Tap 38908 Tayport Mono Mixer Kitchen Tap
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2206368

Range of two hole, single outlet (swivel) combination tap assembly with brass bodies (chrome plated), incorporating quarter turn ceramic disc headworks and single lever operating members (model 1607023) or non-rising spindle headworks with dome type operating member (model 167021). The spout outlet incorporates a plastic aerator or plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2206368
Expiry date:
30/06/2027
Size:
1/2” BSP (M)
Marking:
ebb & flo on body
Installation Requirements:
R001 R006 R010
Model:
37138 Deck Mono Mixer Kitchen Tap & 71595 Lever Deck Mixer Kitchen Tap
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2004080

Single hole, single outlet, fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004080
Expiry date:
30/04/2025
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
ebb + flo tap body.
Installation Requirements:
R001 R006 R010
Model:
30167 PENTLE TALL BASIN MIXER COMBINATION TAP ASSEMBLIES
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2207369

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates either a combined EPDM washer and stainless steel strainer with a plastic flow straightener, or an EPDM washer with a plastic aerator. The product is supplied with a click type waste, verified by test. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2207369
Expiry date:
31/07/2027
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
ebb + flo on body.
Installation Requirements:
R001 R006 R010
Model:
62689 HEACHAM BASIN MIXER COMBINATION TAP ASSEMBLY
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2207370

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disk headworks with single lever operating members. The spout outlet incorporates a combined EPDM washer with a stainless steel strainer and a plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2207370
Expiry date:
31/07/2027
Size:
¾” BSP (M).
Marking:
ebb + flo on body.
Installation Requirements:
R001 R006 R010
Model:
27036 HEACHAM BATH FILLER COMBINATION TAP ASSEMBLY
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2207371

Two hole, metal, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a manual diverter to the shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose, handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2207371
Expiry date:
31/07/2027
Size:
¾” BSP (M).
Marking:
ebb + flo on body.
Installation Requirements:
R001 R006 R020
Model:
39634 HEACHAM BATH SHOWER MIXER COMBINATION TAP ASSEMBLY
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2210361

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating member. The spout outlet incorporates a plastic flow straightener and a combined NBR washer and stainless steel strainer. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2210361
Expiry date:
31/10/2027
Size:
¾” BSP (M).
Marking:
ebb + flo on body
Installation Requirements:
R001 R006 R010
Model:
18148 Pentle Bath Filler Tap
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2210364

Range of screw down valves with brass or DZR brass bodies, brass or DZR brass bonnets, EPDM washers and PTFE seats. Compression connection to be used with copper pipe manufactured to EN1057. Maximum working pressure 16 bar. Maximum operating temperature 85°C.

Section:
2310 Valves
Section Subtitle:
Stop, metal, screw down.
WRAS Approval Number:
2210364
Expiry date:
31/10/2027
Size:
15, 20, 22, & 28 mm compression
Marking:
TS, date of manufacture (MM/YY), EN1213, size and flow arrow stamped on body; for DZR body models, with CR mark on body
Installation Requirements:
R001
Model:
75472 15MM BRASS STOPCOCK CXC 32571 22MM BRASS STOPCOCK CXC 69119 15MM BRASS STOPCOCK CXC DZR 22957 22MM BRASS STOPCOCK CXC DZR 76247 20MM X 20MM BRASS STOPCOCK CXC
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2211822

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener and a combined NBR washer and stainless steel strainer. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2211822
Expiry date:
30/11/2027
Size:
¾” BSP (M).
Marking:
ebb & flo on rear of tap body.
Installation Requirements:
R001 R005 R010
Model:
92468 Braye Bath Filler
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2211823

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating non-rising spindle headworks The spout outlets incorporates a stainless steel strainer and plastic flow strainer or a plastic aerator. The products are supplied with a click type waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2211823
Expiry date:
30/11/2027
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
ebb & flo on front of tap body
Installation Requirements:
R001 R006 R010
Model:
51856 Basin Mono Mixer 57544 Traditional Basin Mixer 72809 Solva Basin Mixer
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2211347

Range of deck mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and a NBR washer with a stainless steel strainer. The products are supplied with metal backnuts, stainless steel inter-locking shower hoses with EPDM lining and handsets. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2211347
Expiry date:
30/11/2027
Size:
¾” BSP (M)
Marking:
ebb + flo on rear of tap body
Installation Requirements:
R001 R005 R030
Model:
20561 Braye Bath Shower Mixer
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2211348

Range of two hole, metal, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating member and a manual diverter to shower outlet. The spout outlets incorporates a plastic flow straightener and a NBR washer with a stainless steel strainer. The product is also supplied with a shower hose, handset and metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2211348
Expiry date:
30/11/2027
Size:
¾” BSP (M).
Marking:
ebb + flo on tap body
Installation Requirements:
R001 R006 R020
Model:
18542 Pentle Bath Shower Mixer Tap
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2207389

Range of lever operated spherical valves with brass bodies (nickel plated), chrome plated brass balls, and EPDM ‘O’-rings. Compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2207389
Expiry date:
31/07/2027
Size:
75207 15mm compression x ¾” BSP (M), 60680 15mm compression x 15mm compression x ¾” BSP (M), 55176 15mm compression x ¾” BSP (M) x ¾” BSP (M),
Marking:
TS, flow arrow and date of manufacture (MM-YY) on body.
Installation Requirements:
R001
Model:
75207 STR WASHING MACHINE TAP CP, 60680 ELBOW WASHING MACHINE TAP CP, 55176 TEE WASHING MACHINE TAP CP,
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2207385

Range of piston type float operated inlet valves with brass bodies and backnuts. Maximum working pressure 8.0 or 10.0 bar (please refer to model). Cold water use only.

Section:
2120 Valves
Section Subtitle:
Float operated, piston type, metal body.
WRAS Approval Number:
2207385
Expiry date:
31/07/2027
Note:
For use with floats complying with BS 2456, not supplied. All models, except 39573 are marked with BS1212/1.
Size:
½”, ¾” or 1” BSP(M)
Marking:
TS, WRAS, date of manufacture MM/YY on body.
Installation Requirements:
R001
Model:
39573 1/2" PT1 Float Ball Valve HP 10 bar 19256 1/2" PT1 Float Ball Valve LP 8 bar 80562 3/4" PT1 Float Ball Valve HP 10 bar
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2207386

Range of high and low pressure diaphragm float operated valves with brass body and backnuts. Maximum working pressure 8.0 or 10.0 bar (please refer to model). Cold water use only.

Section:
2080 Valves
Section Subtitle:
Float operated, diaphragm, metal.
WRAS Approval Number:
2207386
Expiry date:
31/07/2027
Note:
For use with floats complying with BS 2456, not supplied.
Size:
½”, ¾” or 1” BSP(M)
Marking:
TS, WRAS, date of manufacture, BS1212/1 & MM/YY on body
Installation Requirements:
R001
Model:
78244 1/2" PT2 Float Ball Valve HP 10 bar
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2301712

Range of pillar taps (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal back nuts Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2301712
Expiry date:
31/01/2028
Size:
¾” BSP (M)
Marking:
ebb + flo ( Trademark of Toolstation) on tap body
Installation Requirements:
R001 R006
Model:
92643 PENTLE BASIN TAPS 65911 PENTLE BATH TAPS
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2301714

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass bodies), incorporating a ceramic cartridge headwork with single lever operating members. The spout outlets incorporate plastic flow straighteners or aerators. The products are supplied with approved click type wastes, verified by test. Maximum working pressure - 10.0 Bar Model Braye 94015 Maximum working pressure - 5.0 Bar Model 85781 Pentle Maximum operating temperature 65.0°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2301714
Expiry date:
31/01/2028
Note:
No testing has been performed on pop-up waste.
Size:
Stainless Steel braided, EPDM lined flexible hoses with 1/2" BSP captive nut end connections.
Marking:
ebb + flo (brand of Toolstation) on tap body
Installation Requirements:
R001 R006 R010
Model:
85781 PENTLE BASIN MONO MIXER & 94015 BRAYE BASIN MIXER
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2304354

Range of brass stopcock incorporating EPDM and PTFE washers. Compression connections, to be used with copper pipe EN1057 only. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
2310 Valves
Section Subtitle:
Stop, metal, screw down.
WRAS Approval Number:
2304354
Expiry date:
30/04/2028
Size:
see model
Marking:
TS, size, EN1213, flow arrow, date of manufacture: MM-YY, EN1254-2, size stamped on body and nut.
Installation Requirements:
R001 R120
Model:
38361 - 15MM X 25MM BRASS, 11228 - 22MM X 25MM BRASS,
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2206381

In-line spherical valve with a chrom eplasted DZR brass body, brass ball and EPDM ‘O’-rings, incorporating a single check valve cartridge (verified by test, suitable for fluid catergory 2) with a lever operating member. To be used with copper pipe manufactured to EN1057. verified Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2206381
Expiry date:
30/06/2027
Size:
15MM compression × 3/4" BSP (M)
Marking:
TS, CR, on body; flow arrow, date of manufacture (MM-YY) on body
Installation Requirements:
R001
Model:
39703
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2310137

Range of T-type thermostatic mixing valves with brushed chrome plated DZR brass bodies. Each inlet incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression connections are for use with copper pipe (manufactured to BS EN1057). Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2310137
Expiry date:
31/10/2028
Size:
See model.
Marking:
Made 4 Trade and product info on operating member. CR and flow arrow on body.
Installation Requirements:
R001
Model:
65850 TMV2 & TMV3 Thermostatic Mixing Valve 15mm (14.7mm compression). 80371 TMV2 & TMV3 Thermostatic Mixing Valve 22mm (21mm compression).
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2402805

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass body), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporate a plastic flow straightener or plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65˚C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2402805
Expiry date:
28/02/2029
Size:
Stainless steel braided EPDM/PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
ebb & flo on Body.
Installation Requirements:
R001 R006 R010
Model:
38842 Ladram Mono Mixer Kitchen Tap
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#2312369

Range of two hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes), incorporating quarter turn headworks with various type operating members and a manual diverter to shower outlet. The spout outlets incorporate either a plastic flow straightener or plastic aerator. Model (173605) has an open outlet type spout. The products are supplied with metal backnuts, shower hose and handset. Maximum working pressure 10 bar. Maximum operating temperature 65°C but 70°C for models 173605, 173605 MBK1 and M33145E

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2312369
Expiry date:
31/12/2028
Size:
¾ BSP (M)
Marking:
ebb & flo on body
Installation Requirements:
R001 R006 R020
Model:
90412 Cobo Bath Shower Mixer
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval


#240202084

Single hole, single outlet (swivel) combination tap assemblies with (brass bodies -various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator and a pull out spray. The connection between the outlet and the hose incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
240202084
Expiry date:
28/02/2029
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections
Marking:
ebb & flo on body.
Installation Requirements:
R001 R006 R009 R090
Model:
45861 Cresswell Pull Out Mono Mixer Kitchen Tap
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.